Passing images to different views

Hi all,
I am currently working on integrating the camera into an app I am developing (first time working with camera and images), and I am trying to pass images to different views. I have worked with passing text with text fields to labels using prepareForSegue methods, but have not come across any clear examples of tutorials on how to take a photo, and move that captured photo along to different views, pretty much the same as the instagram camera process (image below to illustrate).
In short, my scenario is:
...launch camera from button on home screen, then take a photo (currently want to use AVcapture framework) which once photo is taken/captured is sent to a UIImageView in a second view to crop and overlay text over the image, then submit to feed. If anyone can provide some sample code that would be very much appreciated.
Thank you very much for any feedback.

Hi Sethuraman,
This is not possible with current design of product as exploration views are combination of components from different information spaces.
You can raise an idea as stated above at www.ideas.sap.com
Regards,
Pranay Sharma

Similar Messages

IBase between different views

Hi everyone, How to pass IBase between different views of different components?
Thanks in advance!

Hi Dave,
First thing is to bind your context having field for ibase to custom controller of your component and then please follow
Re: Bind a cuco from component A to component B
Hope this helps.
e Regards,
Bhushan

Images displaying differently in Library view to Develop - also affecting Exports

I've run in to a strange problem since the 4.1 upgrade.
When displayed in the Library view, images are not appearing correctly. In my case, there is a huge amount more noise in the Library view compared to the Develop view. This is also affecting Exports.
I have been unable to find any answers online, and only found one other case of this reported via a You Tube video.
Any ideas?!
Many thanks
Rick

I am assuming you have a correctly calibrated monitor calibrated using a hardware calibrator. Lightroom sometimes shows the aforementioned problems with canned monitor profiles on windows machines. Now that out of the way:
I am also having this problem - the library view is closer to the printer output - very frustrating! In dev mode the image is lighter - sometimes appears to be too hot, but in library and during print it is just right. This was not a problem in 3 - what's the fix?
Have you tried seeing what happens when you soft proof for the paper profile in the Develop module?
It seem the fit views do not match up...the confusion comes in that it seems the fill views sometimes do, and sometimes do not match. when the images appear different, I've the sense in dev the images are brighter and hotter.
This can happen if your image is very noisy or has a lot of high frequency detail. The sharpening preview in fit view that is applied in Develop tends to brighten images with lots of noise or detail. It also happens when you are applying a lot of color noise reduction and have a lot of colored detail. SInce Lightroom cannot really show you the result of this correctly but for when looking at 1:1, this results in the Fit preview showing more color saturation than there really is.

PS CS5 Image Display Differs From Used ICC Profile In Win 7

Hi,
on my Windows 7 Ultimate x64 machine, I just calibrated my Dell SP2309W monitor using an i1DisplayPro and basICColor 5, creating a ICC v2 profile (I am aware of the problems under Windows with ICC v4 profiles).
It created the ICC profile and applied it to be used by Windows. I double checked under COLOR MANAGEMENT that the new ICC profile is being used. Although I can see that the new ICC is being used (desktop appearance changes), there are a few issues I am experiencing:
(1.) Windows Photo Viewer
The thumbnails in Windpows Explorer look fine (they DO use the new ICC profile), when I double click a jpeg and open the image it DOES NOT use the new ICC profile. When I click the PLAY SLIDESHOW button (starting the slideshow) in the opened image in Windows Photo Viewer, the images DO use the new ICC profile.
(2.) Internet Browsers
All current internet browser (Firefox, IE, Safari and Chrome) DO use the new ICC profile and display the image correctly.
(3.) Photoshop CS 5
When I open the same image - that Windows Photo Viewer does not correctly displays (according to the new ICC profile) - in Photoshop CS5, I get the same image display that Windows Photo Viewer gives me (when not thumbnail or not in slideshow mode) - it appears to be the sRGB display.
My color settings in PS CS5 are: North America General Purpose 2 > sRGB IEC 61966-2.1.
When I go to View > Proof Setup > Monitor RGB I get the image display using the new ICC profile.
Why does the image look different in PS than my calibrated monitor should output ?
I was under the impression (please correct me if I am wrong), that the sole purpose for calibrating my monitor was to get a uniform display across (ICC aware) applications. Even when one applies different color spaces to a document in PS, I thought the output on my calibrated screen done by the graphic card should always be according to my calibration and the settings in the ICC profile being used.
What Am I doing wrong or what am I misunderstanding ?
Any help or input is appreciated !
Thanks.
- M

Hello,
A note on monitor calibration: calibrating your monitor will not guarentee that every application will display color correctly, it's more of a step along the pipeline, and for the preview part of a color workflow it's the last step. Here's how color translation follows for an ICC workflow when previewing to a monitor:
Image Color Numbers > Document Tag or Workspace Profile > Monitor Profile
For non-color managed applications, if the original document is or isn't tagged with a color profile it will be translated directly to the monitor profile anyway. This is the equivalent in Photoshop of selecting "Monitor" in soft proofing. Selecting monitor in softproofing will bypass the tagged or workspace profile to translate colors directly through the monitor profile.
For most automatic color managed applications (like Firefox), the image will be translated through the tagged profile and then sent through the monitor profile. If the image is untagged or the profile is unrecognized, the colors get sent directly to the monitor profile.
For Photoshop, a tagged document will have its profile respected and then sent to the monitor. An untagged document will be assigned the workspace profile, which acts like a temporary document profile, and then gets sent to the monitor. This is often why users will notice Photoshop behaves differently from other applications. It's usually a case of the workspace coming into play. By default the workspace profile is set to sRGB. You can change this in Edit > Color Settings.
The purpose of the workspace is originally for printing workflows, as a way of keeping consistant color translations when dealing with both tagged and untagged documents. For web output workflows it can be useful for viewing everything through sRGB, which is typical of the average monitor output (not so with newer wide-gamut monitors, another source of confusion...) combined with the fact that originally most web browsers were not color managed. Hence viewing everything through sRGB is pretty close to what most monitors see and what untagged/unmanaged docs will look like.
Monitor calibration is useful only because it brings your monitor output to a "known state". In traditional workflows the monitor was always a middle-man, a preview device which was useful for getting an idea of what the printed output would look like before you print it. Since print colorspaces are often smaller than display spaces, it's feasible and useful to narrow down the monitor/display space and calibrate it to a known state, so that even if it doesn't totally match the print, you'll get used to its differences/limitations and they'll be consistent so long as the calibration is maintained.
For web output, your final output is often another user's computer monitor, which can have any form of behavior (most standard monitors are pretty close to sRGB, or use sRGB as an operating system workspace (default monitor profile). Wide gamuts behave differently, but I'm not sure if there's a particular ICC space that they closely match, or if different wide-gamuts are even that close to each other in their display color spaces.
Hope this helps!

How can i show images from different folders in image gallery

Hi All,
         i have downloaded and executed photo viewer image gallery application.
          in that we r showing images sequentially what we have defined in xml file.
         but i want show images randomly or i want show images from different gallary.
Can any one help me.
thanks
Raghu.

WaqarLFC7 wrote:
On Windows:
Ctrl + click on the songs you want to group - then right click and click get info and it will ask you if you want to get info for multiple items click YES then under album name it whatever you want and them songs will be grouped into 1 album.
Mac:
Same procedure but hit SHIFT instead of CTRL.
Actually, it's right click or ctrl click, same as windows.

Different View for same document library on a Wiki Page

Hi,
I am developing a Provided hosted app which have a functionality to create a document library with two Views. Also we need to show this document library in a wiki page with two different views.
I am using CSOM (C#). I am able to create the document library and the two views programmatically. But when I add the document library in the wiki page the default view (All Documents) is shown for both the web parts. There is an hidden view created with
the WebPartDefinition from the xml provided through code.
Through CSOM we are able make a View as default with the link below.
http://sharepoint.stackexchange.com/questions/90433/add-document-library-xsltlistviewwebpart-using-csom-or-web-services
In my case both the webparts will get the same view, where I need different view for same document library in a wiki page.
Also I tried to update the web parts with the following code.
string viewString = @"<View Name='{0}' MobileView='TRUE' Type='HTML' Url='/SitePages/Home.aspx' Level='1' BaseViewID='1' ContentTypeID='0x' ImageUrl='/_layouts/15/images/dlicon.png?rev=23' >
<Query><Where><Eq><FieldRef Name='KeyDocument'/><Value Type='Boolean'>1</Value></Eq></Where></Query>
<ViewFields><FieldRef Name='FileLeafRef'/><FieldRef Name='DocumentOwner'/><FieldRef Name='Modified'/>
<FieldRef Name='_UIVersionString'/><FieldRef Name='Editor'/></ViewFields>
<RowLimit Paged='TRUE'>30</RowLimit><JSLink>clienttemplates.js</JSLink><XslLink Default='TRUE'>main.xsl</XslLink>
<Toolbar Type='Standard'/></View>";
WebPartDefinition wpd = wpfound.FirstOrDefault();
string formattedstring = String.Format(viewString, wpd.Id);
wpd.WebPart.Properties["XmlDefinition"] = formattedstring;
wpd.SaveWebPartChanges();
web.Context.ExecuteQuery();
I created two views (viewString) as shown above.
The above code did not throw error, but it did not update the web part.
Please advise how to move forward.

Hi Samir,
When we click outside of the list view webpart on a webpart page (or allitems.aspx page) with containing multiple webparts, the list view webpart will lose the focus, and the selected items will be deselected, this is by design.
You can look at the following article with using the approach/workaround of Javascript to prevent the specified list view webpart from losing focus.
http://sharepoint.stackexchange.com/questions/44360/list-view-loses-focus-when-additional-webpart-added-to-page
//Set focus on our list web part
var webPart = document.getElementById('WebPartWPQ1');
WpClick({target: webPart});
//Prevent it from losing focus
SP.Ribbon.WebPartComponent.$3_1.deselectWebPartAndZone = function() { };
Thanks
Daniel Yang
TechNet Community Support

Gray scale photos images are different but should be the same; help?

I send a gray scale image from Lightroom (Edit with ...) and it opened CS4 photoshop.
I made a blank document , 11x14".
I used Windows/arrange/ tile to view the blank and the gray scale image. I tired various methods of bringing the gray scale image to the blank one (move tool, select all and move, copy and paste). Each time, I did this within seconds of each other (I made no changes to fill, opacity, and I used Normal). I brought the image in twice so I could print out the SAME image twice on the larger 11x14 at Sams club in order to use the Epson 7800 printer and not the old wet process on the Fugi machine. One image is darker(lighter) than the other every time. I even tried another image and I got two different exposures.
I wonder if it it only happens with the grayscale images? Perhaps it is a problem coming from Lightroom 2.5?
I did a three image 16x20 and I didn't notice the difference - partly because they were three differenct images in color. I will try two color images from the same file tomorrow.
Any thoughts? I haven't found a possible setting problem that would have been applied between the operations.
Rich

Paulo,
Thanks. I was ready to believe the monitor idea but I still have some reservations.
I don't doubt what you said about the pixels (sounds correct to me).
Why?
I tried another monitor and the images I attached also look like the top one is darker (vertically).
Also, the same is true if I scrolled the images. It seems to me that I should see a difference as I slowly scroll the image vertically. I didn't see a difference.
Read on please.
At any rate (I long for a CRT - my 21" crapped out last year), I am using two SAMSUNG screens, the
one attached to the main computer is the Syncmaster T220 - a well rated
monitor; as far as I knew , read and had friends who recommended them.
The other I just tried is attached to the second computer a couple of feet away. It is the syncMaster T240HD.
So, if it is an LCD monitor problem, it is with both and the same
company. I would think I would have read some bad reports about these
LCDs?
Also, wouldn't the color images also be different when presented the same way? (they aren't).
However, I went back to the original T220 LCD display and moved an image in to a blank one as before, then did the control J to copy the layer, and the images we different again. But, I zoomed in more than usual and scrolled the images and they were lighter at the bottom of the screen and darker at the top of the screen!!!!!!
That is good news and bad news! $$$$$$
If it is the monitor problem, then both images should print as the same.????
Secondly, the display (LCD) attached to the machine at Sams showed the same difference between the two images. AND, I recall that the display is also a Samsung (I will check that tomorrow).
What a bunch of coincidences! I guess I have to search the web for some Samsung answers? and contact the company?
I want to explore as much on my end as possible.
Hunt and another suggested the Control-J to avoid the problem by copying the layer. That didn't work either.
I suppose I could tweak one of the images after bringing them in but I don't know how (I clicked the layer and I wasn't able to do anything - like lighten that image).
Again, thanks for the help. I think the question maybe answered.
I will send the screen capture shortly.
Rich

I get 3 different views of a page

hi I was interested in this product and decided to give it a try, but now I dont get how it works.
I get 3 different views of my page, first is design view, second live preview, and the third is preview in a browser that is grately different.
there is what I get:
everything looks good in live but in browser everything is terrible what am I missing?
here is mine hedder code and css:
<?php ob_start();?>
<!DOCTYPE html>
<html class="html">
<head>
<title>Head</title>

<link rel="stylesheet" type="text/css" href="css/head_style.css"/>

   </head>
<body>
<div id="header">
<img src="images/3.jpg" >
<ul id="menu">
    <li ><a href="index.php">            Home</a>
    </li>
     <li ><a href="templates.php">            Templates</a>
     </li>
           <li ><a href="blog.php">Blog</a>
     </li>
           <li > <a href="about-us.php">            About us</a>
     </li>
    <li > <a href="support.php">            Support</a>
    </li>
     <li id="paskutinis" > <a href="support.php">            Support</a>
     </li>
</ul>
<p id="musetemplatespro" ><a href="index.php">MuseTemplatesPro.com</a></p>
     <a id="cart" href="cart.php">Your Cart</a>
</div>
</body>
</html>
<?php ob_end_flush(); ?>
CSS:
<style>
/** head **/
#menu ul {list-style:none;
position:absolute;
margin-left:0px;
#menu li {
          float: left;
          width: 160px;
          background-color: #444444;
          text-align: center;
          border-right: 2px solid white;
          display: block;
          height: 30px;
          line-height: 30px;
          margin-top: 300px;
          list-style: none;
          margin-left: 0px;
#menu li#paskutinis {
          float: left;
          width: 150px;
          background-color: #444444;
          text-align: center;
          border-right: 3px #444444;
          display: block;
          height: 30px;
          line-height: 30px;
          margin-top: 300px;
          list-style: none;
#header {
          background-image: none;
          position: absolute;
          height: 250px;
          width: 960px;
          left: 100px;
          margin-top: 0px;
#header img{
          position: absolute;
          left: 0px;
          top: 0px;
          width: 960px;
#menu li ul li {
float:none;
width:150px;
text-align:left;
display:block;
border-top:1px solid white;
div#menu ul#menu_   {
float:none;
width:150px;
text-align:left;
padding-left:155px;
border-top:1px solid white;
#menu ul#q   {
position:absolute;
top:0px;
left:0;
visibility:hidden;
#menu li#q:hover ul {
visibility:visible;
#menu li:hover ul {visibility:visible;}
#menu a {
          text-decoration: none;
          color: white;
          font-family: Helvetica, Arial, sans-serif;
          display: block;
#menu li:hover {background-color:maroon;}
#menu {
          position: absolute;
          width: 960px;
          height: 30px;
          margin-top: 0px;
          left: -40px;
          top: -10px;
#head
margin-left:200px;
width:923px;
background-image: url('http://musetemplatespro.com/images/head.jpg');
height: 300px;
#head
margin-left:200px;
width:923px;
background-image: url('http://musetemplatespro.com/images/head.jpg');
height: 300px;
a#cart
          position: absolute;
          margin-left: 1000px;
          margin-top: -55px;
          text-decoration: none;
          color: white;
          font-family: Helvetica, Arial, sans-serif;
          font-size: 25px;
          padding: 5px;
          border: 1px solid white;
          left: -180px;
          top: 296px;
p#musetemplatespro
          margin-top: -1600x;
          margin-left: 65px;
          position: absolute;
          color: white;
          font-family: Helvetica, Arial, sans-serif;
          text-decoration: none;
          left: 25px;
          top: 19px;
p#musetemplatespro a
color:white;
font-family: Helvetica, Arial, sans-serif;
font-size: 35px;
text-decoration:none;
</style>
ul {
          left: 0px;

Design View is just an approximation of how the page will appear minus any scripting. Never rely on it for anything more than a quick reference "click the element to select it" style interface.
Live View is a "mostly there" version of a Webkit browser (Safari or Chrome). It's more accurate, but still doesn't give you everything.
Preview in Browser is your page in an actual browser that is installed on your machine (not an emulation) and should be used to determine how your page will actually appear. The more browsers you preview in, the better. I test in IE10 (9, 8 and 7 in dev tools), Firefox, Chrome, Safari and Opera using PIB.
Make sure to run your pages through the validator at http://validator.w3.org to catch any coding errors. HTML errors are one of the biggest causes of display problems between Design View, Live View and each individual browser and browser version.

Data transfer across 2 different views in web dynpro ABAP

hi all,
can anyone please help me on how to transfer data across 2 different views in wd ABAP.
i have made a view-1 and using another view-2 as a component which is displayed in the tab in view-1.
i am required to fetch a value from the view-1's input field and use it for a further processing in the view-2.
i want to use the value which is in the input field in the view1 as a primary key to get the whole record corresponding to that value and that complete record must be shown in my view2.
the thing here is view1 and view2 are 2 different views.
view1 has a tabstrip control.
the view2 is embedded in a tab of that tabstrip as a used component because it was not possible for me to build the view in the tab as a whole.
please help me out if anyone has done so?
thanx in advance.

Hi,
If both the views are in the same comp, define the context node which holds the input field of view1 in the component controller. Then map this same context node into the context of view2. Then in the inbound plug of view 2, read the context, and fire your select statement based on the input value.
Another way is, pass the input field from view 1 as a parameter when invoking the inbound plug of view2.
Regards,
Wenonah

Distorted Album Cover Images In Cover View Mode

I have recently developed a problem where a number of album covers appear distorted (lines, dots etc.)when in the cover view only.
The same album when viewed in the grouped or list mode displays the correct image in both views.
Please Help

i am probably being bad taking this topic to three different threads. strange thing there is no button for me to start my own new thread.
try this...copy album to artist album and grouping, each album done seperately of course. its a work around for me. i think artist ablum and grouping is redundant. if i sort by artist, thats fine to split them all up, but if i click album, it should group them all together in any view. (i can see the use for grouping, but then playlist or genres can do the same job.

Messages are overlapping in different views.

I have 4 tabs on my screen. I am raising messages for different views but the messages of one view are coming on the other view also. I have use different message area but all the messages are coming in one message area.
Please provide some solution so that the messages relevent to the view should come on the view.
or is there any better solution i.e. without using message area.

Hi Sachin,
While calling message using wizard, just pass VIEW NAME also.. u will get messages in specific view.
CALL METHOD lo_message_manager->REPORT_ERROR_MESSAGE
EXPORTING
MESSAGE_TEXT = ' Error Message '
VIEW = 'MAIN_VIEW' .
Cheers,
Kris.

Exported images looking different in different browsers

I've just published a set of images to my website using a publishing service from Lightroom 5, sRGB. The images look different when viewed in Chrome and Firefox browsers, Chrome looking fine but Firefox displaying them with a red cast. The also display with the red cast in some parts of the OS X Finder but not in Lightroom or Photoshop.
I've run one of the images through Jeffrey Friedl's online exif viewer and it's telling me there's no colour space metadata or embedded colour profile in the images ( http://goo.gl/Ouqkis). this would make sense as far as the strange colour goes but I thought Lightroom always embedded a colour profile?
I've had a couple of suggestions that revolve around changing firefox settings but really I just need for the images to work in any browser, without visitors having to care.
Does anyone have any thoughts
Sample screen grab, Chrome to the left, Firefox to the right.

kimaldis wrote:
Firefox and OS X's Cover Flow view both showed the red cast until this am. Now neither of them do.
Ah ... hang on, I had a second, wide gamut monitor attached to the computer yesterday, mirrored display. Now it's not. I'd been mostly viewing in the main monitor (Macbook Pro), that was the one that was out and I wasn't checking the second monitor much after uploading. I'm willing to bet that was it. Second monitor affecting colour management on the first .....
This is what you are seeing and why everything now looks fine on your MacBook's display, which is NOT wide gamut:
http://www.gballard.net/photoshop/srgb_wide_gamut.html
Here's a screenshot of an sRGB profile ColorChecker image file with and without the profile in FireFox and Chrome browsers. All four browser images look identical on my non-wide gamut display...what do you see?
With sRGB Profile embedded Without sRGB Profile
As long as the images are sRGB profile it doesn't matter whether the color profile is embedded or not.

How can I pass field value betwen view in ICWC?

Hi experts,
I am new to this BSP programming. I have some requirements to modify standard ICWC in CRM 5.0
Hope can get some advices and helps here.
I have added a new field called <status> to context note SEARCHCUSTOMER in BupaSearchB2B view and also the same field name to context note CUSTOMER in BupaCreate view.
I have added the field into both the HTM views and able to execute thru WebClient. However, I have one problem in passing the <status> value from BupaSearchB2B view to the BupaCreate view when I click on the 'create' button.
I do search and saw this thread How can I pass field value beetwen view in IC Web Client? , but i cant figure out how it works.
Do I need to create the field <status> to context note CUSTOMER in BupaSearchB2B? Currently the context note does not have any attributes.
Really appreciate for any help.
Edited by: mervyn tay on Apr 7, 2009 11:42 AM

solved by myself...
code in the CREATE_ACCOUNT method.
ev_entity->set_property( iv_attr_name = 'ZZICNO'
iv_value = lv_icnum1 ).

OBIEE report based on same criteria but different view based on filter

Hi,
I am trying to create a report in OBIEE 11.1.1.5 where In the same report using the same criteria, I can have different views which applies different filter.
Suppose, I have a report criteria as
Dim1, Dim2, Measure1, Measure 2.
I want to create two pivot view based on the same data.
One view will be showing data Dim1="Value1". The other view is duplicate of this view but will show data Dim1="Value2".
Is it possible in OBIEE?
basically what I want is work on the same dataset but different representation and show them in the same report. Please share your opinion.
Regards,
Tanveer.

Hi,
You create a new dim dummy column in criteria and in presentation level create new pivot table view use this dummy dimension column and filter with dim1=value2.
give updates on this.
Mark if Helpful/correct.
Thanks.

Display Image in Power View and Power BI

Hi all,
I need to create a report in power view where i need to display images in tile. I have found one solution to do so, to store the images as a binary data in data model table using the following link
http://www.sharepointanalysthq.com/2014/09/adding-data-bound-images-to-power-view-with-power-query/comment-page-1/#comment-87049
I tried this but still not able to show the images.
Please anyone can help me with solution in detail.
Thanks,
Piyush Jain

Hi Piyush,
are you storing your Data in an Excel Power Pivot model?
Make sure to follow step marking the column containing the Pictures as Data Type Binary.
Are you using jpeg or another picture format?
Best,
Mark

Passing images to different views

Similar Messages

Maybe you are looking for