Passing parameter from url to procedure

i used to pass parameters from url to procedure like
host:port/dads/schema.procedure(para_1, para_2, ...)
for example
http://localhost:7777/pls/login('UK',1,0)
they have been working perfectly before, when i had 8i and webdb.
but now i'm running 10g, and browser returns error page 400 when i click the above links.
i know i can do
host:port/dads/schema.procedure?para_1=value1&para2=value2...
for example
http://localhost:7777/pls/login?language=UK&section=1&timezone=0
and this is what have been suggested in documentation of 9i and 10g
however i have quite a few webpages written in the former syntax and they used to work with 8i and 9i.
i don't want to change all the links in web pages, i prefer to stick with old style.
any one has any idea? is there a switch i should take care of? i checked apache conf files (httpd, mod_plsql, dads) but didn't get it.
ps for 10g companion, i installed http server (apache) only, no html db.
another question is
with brackets() in url, strings are to be quoted by ' ', but with question mark (?), single quote ' ' must not be used, is that what it has to be?
Thanks a lot

anyone have been using this?
http://host:port/dads/schema.procedure(para1,para2,..)

Similar Messages

How to pass parameter from 1 stored procedure to another stored procedure inside crystal report

Hi
I have several stored procedure in my Crystal Report. I am wondering if it is possible for me to pass a parameter to one of the stored procedure and to use the result of that stored procedure E.g. CustomerCode. To another 2 stored procedure to generate the report dynamically?
I have 3 stored procedure
The 1st one is used to gather information and process the calculation
another 2 stored procedure is used for generate the graph and both of them required to take 2 parameters. The 1st stored procedure will require 1 parameter (E.G. Reference Code) and will return a set of information including the data that could be use on the other 2 stored procedures.
After I added these 2 stored procedure, it requires me to pass 3 parameters to the report. I would like to know if I could only pass the Reference Code for stored procedure 1 and use it to retrieve the information for the other 2 parameter?
Thanks in advance
Chi

Hi Chi
To pass parameter from 1 stored procedure to another stored procedure, you will have to create sub report. In your case you will have to create 2 sub reports for 2nd and 3rd stored procedure and link those sub reports with the main report using Reference Code field in order to pass the values.
After creating the report when you will refresh the report, it will ask 4 parameters, one parameter for main report, one for the first subreport and two for second subreport to fetch the data correctly.
Regards
Poonam Thorat.

Passing Parameter from URL to Web Forms - Oracle 10 Application Server

Hi All -
I want to pass parameter from a URL to 10g Oracle Web Forms - Oracle Application Server 10.1.2
http://server1/forms/frmservlet?config=SATWEB_SSO&otherparams=username_sso=BABUS
How to receive this 'username_sso' value inside my forms application ?
Created a Parameter in the same name as URL parameter 'username_sso' in forms but didn't receive the value. I want to know how to receive the value of this parameter within forms from URL.
Thanks - Suresh

Try this,
1. Create a parameter in the formsweb.cfg (say username_sso) under default section ( or you can create it in your own config section)
2. Add the username_sso in otherparams parameter as username_sso=%username_sso%
3. Add this username_sso parameter in your form.
4. Run the form as
http://<machine>:<port>.....?form=blahblah....&otherparams=username_sso=scott
Regards,
Arun

Pass data parameter from URL to Forms

Hi
Is it possible to pass a data parameter from asp to Forms?.
In my asp I have a url to call a form (eg. http://servername:port/forms90/f90servlet/form=testform.fmx). In my testform.fmx I accept 'account no' as a parameter for querying the records. Since I am calling this form from asp, I already have the account no in my asp. I would like to pass this account no to the form automatically.
Is it possible to pass this data parameter from url to forms?.
If possible, what changes to be made in the form. Please help.
sreekumar

Create a parameter in your form, there's a node for it in the Navigator window. Imagine it is called myParam.
Pass it on the URL like this:
http://host/forms90/f90servlet?config=myApp&otherParams=myParam=somevalue
Regards,
Robin Zimmermann
Forms Product Management

Problem while passing parameter from report to report.

Hi
I'm using forms and reports 10g, hava a problem while passing the parameter from reports to report.
i'm using srw.set_hyperlink to call report from report.
i have created a key value in the cgicmd.dat file called
faccre802005-2006: report=faccre80 destype=cache desformat=pdf userid=<userid/passwd@cs> server=<servername>
Now in the format trigger i'm using this key value
function BTN_DEBITFormatTrigger return boolean is
temp varchar2(5000);
IP_ADDRESS VARCHAR2(50);
SERVER_NAME VARCHAR2(10);
L_ACCT_CODE VARCHAR2(14);
begin
SELECT MAST_INT_DESC,MAST_USER_PGM_ID INTO IP_ADDRESS,SERVER_NAME FROM MAST_INT_INFO WHERE MAST_INT_ID='VISHWA';
temp := IP_ADDRESS||'?faccre80'||:P_FIN_YEAR||'+server='||server_name;
temp :=temp ||'+'||'P_PREVIOUS_CODE='''||:ACCT_CODE||''''||'+'||'P_COMPANY_CODE='''||:P_COMPANY_CODE||'''';
temp :=temp ||'+'|| 'P_FROM_DATE='''||TO_CHAR(:P_FROM_DATE,'DD-MON-RRRR')||''''||'+'|| 'P_TO_DATE='''||TO_CHAR(:P_TO_DATE,'DD-MON-RRRR')||''''||'+'||'P_TRUST_CODE='''|| :P_TRUST_CODE||'''';
temp :=temp ||'+'|| 'P_UNIT_CODE='''||:P_UNIT_CODE||''''||'+'||' P_FIN_YEAR='''||:P_FIN_YEAR||'''';
temp :=temp ||'+'|| 'P_LEVEL='''||:P_LEVEL||''''||'+'||'P_HEADER='''||replace(:P_HEADER,' ','%20')||''''||'+'||'P_FORMAT='''||:P_FORMAT||'''';
SRW.Set_Hyperlink(temp);
END;
return (TRUE);
end;
Report is coming but not the expected result because parmaeters are not coming from first report to second report.
If i dont use cgicmd file userid and password are displyed in the URL.
Pl tell me how to pass parameter from one report to another.
thanks and regards

Hi
I got the solution.
I forgot to add %* at end of the KEY value.

Search Results web part - Custom Query using "Value with a parameter from URL" inconsistent

I have encountered what I think may be a bug, but I am hoping that there is something that I am missing.
Within my search site, I have created a new search results page where I want to customize the "Search Results" web part query. I can add in any number of property and keyword filters (using the "Build Your Query" dialog) without
issue... until I add a filter that uses the QueryString property (the builder dialog calls this "Value with a parameter from URL").
If I use {QueryString.MyParameterX} for filtering, it works beautifully in the query builder dialog. I see the expected results in the search results preview pane, but as soon as I apply the changes things become inconsistent.
If I close/reopen my browser and navigate to my page at http://myaddress/search/Pages/testresults.aspx?MyParameterX=test I see results. If I then refresh the page, I get a "Nothing here matches your search" message. I can then go to
the same address but change one character to an uppercase character and get results. Refreshing that same page again returns "Nothing here matches your search". I can only get search results one time per uniquely cased URL without having
to close/reopen my browser. This behavior was seen on both Firefox and IE.
Finally, I found that if I instead navigate to http://myaddress/search/testresults?MyParameterX=test, it always returns results. This, unfortunately isn't the best solution for me... but it is a solution.
Any insight that anyone can provide is greatly appreciated! I would really like to be able to depend on this working in all logical cases (especially since the search center of other sites is set using the path all the way down to /Pages).
Thanks!

Hi, have you been able to solve this issue? I'm getting the same issue and I cant solve it (required CU is installed).
Fabio

How to pass parameter from form6i to report6i

when i passed parameter from form6i to report6i, while previewing report the data was not displaying only fields heading was displaying, but in report6i there is a parameter form thru that it was displaying data, but thru form6i to report6i it was not. Please kindly help me and give me the some sample or example of it.
Thanks
Best regards
Zaheer

ADD_PARAMETER(pl_id,'P_SCRIPT',TEXT_PARAMETER,:b1.script);

Master-detail relationship - passing parameter from form to form

Hello.
I have a question about master detail relationship.
In first form we have master-detail relationship.
Example on dept, emp tables:
We query dept (master), so we can get one or many emp (detail) records. Then we have a third table - tasks. Tasks table (detail) can have many records for one employee.
Tasks table is in another form, which is called with call_form built_in. So we pass a parameter from master to detail - parameter empno. Because of that, we can only see tasks for one employee and can't navigate to another employee. This is normal.
Now comes the question.
Is it possible to call a form (with tasks table) with deptno parameter (so we can navigate through all employees with that department), but first show employee that was last used in first form?
Example of our goal.
Master: deptno = 20
Detail: navigate to JONES employee
Call new form (tasks)
Tasks for JONES employee are first shown
Can navigate to another employee - without requery
Is this possible?
If we pass deptno parameter, we can navigate through all employees - but must navigate to the employee we last used in first form.
If we pass empno parameter to second form, we see last used employee but cannot navigate to another employee without requery.
Hope you understand my problem.
Thanks.

Hi
yes you can pass parameter from one form to another.
In your master detail form set the trigger when-new-instance and there define the global variable like
:GLOBAL.G_CIRCLE_ID := NULL;
and in your task table set the trigger when-new-instance and there define the global variable like and also write this code
:GLOBAL.G_DIVISION_ID := NULL;
IF :GLOBAL.G_CIRCLE_ID IS NOT NULL THEN
     GO_BLOCK('DIVISION');
     SET_BLOCK_PROPERTY('DIVISION',DEFAULT_WHERE,'CIRCLE_ID ='||''''||:GLOBAL.G_CIRCLE_ID||'''');
     EXECUTE_QUERY;
END IF;
:GLOBAL.G_CIRCLE_ID := NULL;
now you maintain your trigger according your need.
Regards,

How can I pass parameter from report to form?

Hi :)
Now I try to build conference room like this by using form
and report. And i design that when users click at group report
then i'll show page that contain questions report and add
question form. And question form and report must receive the
same parameter from group report.
First Problem: is I don't know how group report send the
same parameter to question report and add question report at the
same time. And is it possible??? If not please suggest me what
should I do???
Second Problem: is I don't know how can I pass parameter from
report to form. I don't know the way to do it.
Please tell me!!! Please...
I look forward to hearing from all of you.
Thank You.

One way is to create a link based on that form and attach that
link with the report. Through links you can pass parameters

How to Pass Parameter from BIP to Dashboard Report

Hi,
Parameter from BIP to Dashboard Report
If I select BIP report paremeter should pass value to dashboard report
thanks in advance.
CHEERS ,
Jel

Hi Saichand,
I hav gone through above link its passing values from Dashboard prompt to BIP report only..
just i need like reverse (if i click on BIP report value then it should pass that value to Dashboard reports) in this this case how to pass parameter from BIP to dashboard report
Thanks in advance
Cheers,
Jel

Hw to pass parameter from report to forms

Dear Friends,
I m working on Forms n Reports 6i,
I m running report n passing parameter from the forms now the requirement is that if report run successfully it shuld give the msg otherwise give an user define error msg.
Hw do i pass any parameter from report to form for acknowledgment.
Thanking yours
Chandan

Hi Rajat,
using run_product built in i can pass parameter from forms to reports but hw can i get some parameter value from reports to forms as mentioned earlier my post
Thanking Yours,
Chandan

Passing data from Oracle stored procedures to Java

We're going to write a new web interface for a big system based on Oracle database. All business rules are already coded in PL/SQL stored procedures and we'd like to reuse as much code as possible. We'll write some new stored procedures that will combine the existing business rules and return the final result dataset.
We want to do this on the database level to avoid java-db round trips. The interface layer will be written in Java (we'd like to use GWT), so we need a way of passing data from Oracle stored procedures to Java service side. The data can be e.g. a set of properties of a specific item or a list of items fulfilling certain criteria. Would anyone recommend a preferable way of doing this?
We're considering one of the 2 following scenarios:
passing objects and lists of objects (DB object types defined on the schema level)
passing a sys_refcursor
We verified that both approaches are "doable", the question is more about design decision, best practice, possible maintenance problems, flexibility, etc.
I'd appreciate any hints.

user1754151 wrote:
We're going to write a new web interface for a big system based on Oracle database. All business rules are already coded in PL/SQL stored procedures and we'd like to reuse as much code as possible. We'll write some new stored procedures that will combine the existing business rules and return the final result dataset.
We want to do this on the database level to avoid java-db round trips. The interface layer will be written in Java (we'd like to use GWT), so we need a way of passing data from Oracle stored procedures to Java service side. The data can be e.g. a set of properties of a specific item or a list of items fulfilling certain criteria. Would anyone recommend a preferable way of doing this?
We're considering one of the 2 following scenarios:
passing objects and lists of objects (DB object types defined on the schema level)
passing a sys_refcursor
We verified that both approaches are "doable", the question is more about design decision, best practice, possible maintenance problems, flexibility, etc.
I'd appreciate any hints.If logic is already written in DB, and the only concern is of passing the result to java service side, and also from point of maintenance problem and flexibility i would suggest to use the sys_refcursor.
The reason if Down the line any thing changes then you only need to change the arguments of sys_refcursor in DB and as well as java side, and it is much easier and less efforts compare to using and changes required for Types and Objects on DB and java side.
The design and best practise keeps changing based on our requirement and exisiting design. But by looking at your current senario and design, i personally suggest to go with sys_refcursor.

Get parameter from URL in Java code

Hello everyone,
I've got strange problem. I have one JSF page with two controls:
- InputText
- Button
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<af:document title="view12.jsf" id="d1">
<af:messages id="m1"/>
<af:form id="f1">
<af:inputText label="Label 1" id="it98" value="#{param.test}" editable="always"/>
<af:commandButton actionListener="#{bindings.przekierowanie.execute}" text="przekierowanie"
disabled="#{!bindings.przekierowanie.enabled}" id="cb1"/>
</af:form>
</af:document>
</f:view>
And I want to initialize the InputText with parameter from URL (param name is test - value="#{param.test}"). In JSF page everything is fine. But after clicking button I have to read the value from InputText in Java Code, so I have URL:
http://127.0.0.1:7101/Application6-ViewController-context-root/faces/view12.jsf?test=asd
and my Java code which is executed after clicking button is:
public String przekierowanie() {
Map <String,String> map=FacesContext.getCurrentInstance().getExternalContext().getRequestParameterMap();
String tttValue=map.get("test");
System.err.println("test:" + tttValue);
return null;
but this doesn't work... Everytime I get null when I click the button. Could you tell me why and How to obtain this value, from InputTex in my java function?

Hi,
If you have a parameter in URL named as "product", you can get its value like:
import javax.faces.context.FacesContext;
import javax.servlet.http.HttpServletRequest;
FacesContext facesContext = FacesContext.getCurrentInstance();
HttpServletRequest httpRequest =
(HttpServletRequest)facesContext.getExternalContext().getRequest();
String product = httpRequest.getParameter("product");

Passing parameters from URL to multiple iViews on a page.

Hi Everyone,
Could you please point me to a guide or howto, which explains on passing parameters from URL to multiple iViews on a page. I already know how to pass parameters from URL to a single iView (wiki).
Thanks!
Indy

Hi Indy,
Currently, passing parameters to the page which contains VC iViews is not supported, only directly in the iView's URL.
Regards,
Natty

Not able to pass parameter from one fragment to another fragment in another taskFlow

Hi,
I'm trying to pass parameter from one fragment to another fragment and want to print the parameter value in second fragment.
i have inputtext in first frag---
first fragment belongs to one taskflow1 and this taskflow1 i had darg and drop to one mainPage.
Under taskflow1 itself i drag and drop one taskflow call activity and on top of that i drag and drop another bounded taskflow as taskflow2
under taskflow2 i have one fragment as fragment2and in that i have one outputtext field, now here i want to print the value from fragment1--inputtextfield value
to achive this i had tried many ways but somewhere doing mistake please explain step by step.
Thanks
Mahesh

In addition you need to tell us your jdev version!
Can you elaborate on your use case a be more?
On which event this should happen?
In general contextual events should allow you to implement this, however, as I don't understand the use case, I find it hard to help.
Timo

Passing parameter from url to procedure

Similar Messages

Maybe you are looking for