Passing table values from one webdypro screen to the next in BPM flow
Hi,
I have a BPM scenario where in User 1 will be entering data on a java webdynpro view in the form of a table. The user 1 should be able to edit contents of the table.
These set of values in the table from User 1 needs to be passed to User 2 through BPM. The User 2 should be able to read the values edited by User 1 in the table.
Please could you suggest how we could map the table attribute?
With respect to Context Elements, I have a Node created for the table. But, the data doesnot seem to pass from User 1 to User 2.
Any suggestions on this would be extemely helpful.
Thank You.
Hi,
Please follow the below mentioned steps:
Create a Human Activity containing the task(WebDynpro Task) to edit the table values.
Create a data context of type (Context of the table node used in the Webdynpro task).
Map the output of the human activity to the input of the data context.
Create another human activity that contains the task to read the values of task1
Assign this task to User 2
Map the output of data context with the input of the second human activity.
Regards,
Gayathri
Similar Messages
-
How do I move from one GUI screen to the next using J2SE?
Hi, How do I move to another screen (JFrame) from an existing screen (JFrame) using a JButton as the trigger?
There are hundreds of ways to do this, this one is
just a rather simple aproach
public void show(SomeType myParameter){
... do some work for preparing the Dialog for diplaying ...
this.setVisible(true);and use this instead of the call to
frame2.setVisible(true)Spieler -
Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC
This is planned to be fixed in the next release.
-
how do I get an object to rotate as it moves up and down or left and right from one time key to the next ?
I'm partial to this series:
After Effects basics tutorials by Andrew Devis
The subject matter is very clearly-defined by topic.
And AE shouldn't up & quit on you... but you haven't breathed a word about your system or your AE version. Please share. -
Pass variable value from one dashboard to another dashboard
Hello,
I have one main dashboard which have "year" prompt with drop down and variaous links & also some reports.
And we have same year prompt on another dashboards only difference is, this prompt is editable not drop down.
The requirement is, when I navigate from main dashboard to another dashboard through reports, that time selected prompt value
comes in navigated dashboard prompt.
But When I navigate from main dashboard to another dashboard using Link or using <A Href> tag, now selected prompt value can not come in navigated dashboard prompt.
How can we pass selected prompt value from one dashboard to another dashboard? OR Is there any other technique?
Thanks,
PradipHi,
You need to make the scope of the prompt as 'Dashboard' and if this doesnt work.
Then use presentation variable in the first prompt and pass it to the second prompt.
So this will surely pass the values across pages.
Regards
MuRam
NOTE: Please mention if this resolved your problem/still facing and close the thread. -
Passing a value from one page to another with multiple projects?
Hi,
I am trying to do something and I am not quite sure what I may be doing wrong. Situation is this:
I have 1 project which is our Model, deployed into a .jar and imported successfully into the main project. No problems with this.
I also have another project for editing profiles, in it it contains a taskflow running off of page fragments to accomplish a CRUD design. This is also deployed and imported into our main project successfully. It has a parameter value that should be detected upon entry into the pageflow called inEntityID.
I have our main project application which has both imported .jar files into the library.
I am using the unbounded adfc-config Flow to make sure that the pages can see each other. They can.
If I use no data being sent from my main page to my edit page I can see both the main page fine and what would be a working region that is displaying the task flow from our editing project. If I attempt to send a value from my main page to the edit page it will not show up.
ADFC looks like so: MAIN goEdit>EDIT
Code snippet from my button which gathers data from the main page table to send to the edit page via action goEdit
<af:commandToolbarButton text="Edit Entity"
id="ctb3" action="goEdit">
<af:setPropertyListener type="action"
to="#{pageFlowScope.sendID}"
from="#{bindings.PseLegalEntityId.inputValue}"/>
</af:commandToolbarButton>
PseLegalEntityId is the value that I have named which is an attiributevalue from my mainPageDef which links to the primary key that I want to send to edit.
The paramenter that I have set in the region is set as such: Task Flow Binding Parameters : id* inEntityID | Value* #{pageFlowScope.sendID}
I am using Jdeveloper 11.1.1.2.0
Any insight on what I may be doing wrong would be helpful. Thanks in advance,
PSPIs more information needed to answer this? if so let me know which.
Thanks,
PSP -
Passing the values from one selection screen to another report
Hi all,
This is my requirement...
I need to hav a selection screen with various input parameter along with 3 radio buttons...
If i enter the values and select say first radiobutton the corresponding called program needs to be executed .
NOTE :
1)The called program selection screen needs to be skipped
2) the values entered in the calling program needs to be passed to the called program and the output of the called program needs to be displayed.
3)the selection screen is the same for both calling and called program
Can anyone plz help in this regard?
Regards,
Gowri ShankarHi...
Use the statement
<b>SUBMIT zps_called_report WITH SELECTION-TABLE seltab.</b>
see the following link....
<b>http://help.sap.com/saphelp_nw04s/helpdata/en/9f/dba51a35c111d1829f0000e829fbfe/frameset.htm</b>
Hope it helps you...
Let me know if u have any more doubt...
Reward points if useful......
Suresh....... -
How to pass all values from one node element to created node element?
Hi
I have model node element under which there are 7 values, and I've created value node element and trying to pass the values from the model node Element to this value node element. But instead of passing all the values its listing only one value.
How do we rectify this problem!!!
Thanks in Advance
SrikantHi Anil
I've created the node named: TableNode
and the name of the node from which i want to get the data is : Li_Required_Node
the Node Structure is
Context
|_ Zs_Quantity_Input
|_Output
|_Node_Required_Node
|_Schddt
|_TableNode
|_CmpDate
The Schddt has some 7 values
The code Snippet is as follows:
IPublicPricesComp.ITableNodeElement nodeElement;
IPublicPricesComp.ILi_Required_NodeElement scheduleElement;
int counter3Max = wdContext.ILi_Required_Node().size();
for( int counter3= 0 ; counter3 < counter3Max ;counter3++ )
nodeElement = wdContext.createTableNodeElement();
scheduleElement = wdContext.nodeZs_Quantity_Input().nodeOutput_Contract_Qty().nodeLi_Required_Node().getLi_Required_NodeElementAt(counter3);
nodeElement.setCmpDate(scheduleElement.getSchddt());
wdContext.nodeTableNode().addElement(nodeElement);
On writing the above code and then binding the node to a table column only one value getting displayed
Where can be the error?
Thanks in Advance
Srikant -
How can I pass a value from one application to another through URL
I am passing a value APP_USER from one application to another application (item is P_ASK_U) through navigation bar entrees URL.
This is working with in the application..(javascript:popupURL('f?p=&APP_ID.:165:&SESSION.::&DEBUG.::P_ASK_U:#&APP_USER.#') )
This one is not passing the value, eventhough it open the application..
javascript:popupURL('http://htmldb.oracle.com/pls/otn/f?p=35129:1:::P_ASK_U:&APP_USER.');
Is there any syntax error or is it not possible, please let me know..
Thanks
VenuHi Scott,
You are right, the first one do not need # character.
In the Doc it is mentioned as....
Pass the value on a URL reference using f?p syntax. For example:
f?p=100:101:10636547268728380919::NO::MY_ITEM:ABC
I am using the following URL, it pops up the external application, but it is not passing the APP_USER value to the page item of that application.
javascript:popupURL('http://htmldb.oracle.com/pls/otn/f?p=35129:1::P_ASK_U:&APP_USER.');
sorry I still do not know what I am missing..
Thanks
Venu -
Is it possible to pass selected value from one jsp to another jsp page?
In my welcome page(in jsp), if the user is selecting some values, is it possible to pass those values to another jsp page and display?
If yes, how can it be done?
please help..Yes, you would have to make the motion from one page to the next submit a form. Then on the second JSP you can use request.getParameter("nameOfInputField") to get the value the user selected.
-
Passing parameter value from one script to another in job chain steps
Hi all,
We have a scenario where in we have a job chain with two steps
1-Step 1 contains a script which fetches value from database to the script parameter(in/out) - PAR_DB_VALUE
2-Step 2 contains another script which uses the value of the parameter PAR_DB_VALUE and has to assign to another parameter in the script 2 called PAR_FETCHED_VALUE(in)
How to pass the value of PAR_DB_VALUE to PAR_FETCHED_VALUE which are parameters in two different steps
Please help
Thanks and Regards
RajHi,
You can achieve this as follows (CPS version 6 & 7):
- Edit the chain
- Go to the second step, to the parameters of the script call in that step
- Go to the parameter (PAR_FETCHED_VALUE) that you want to be filled by the parameter of the first step
- choose "Chain value" in the detail screen for the parameter, and select the desired out parameter from the drop down
Note that both parameters need to be of the same type for this to work.
Regards,
Anton. -
Pass lov value from one page to another page
hi
can any one please help me how to pass selected lov value in one page to another page
iam able to get the lov value in controller but how to pass that value as parameter to the VO in another page.Hi,
Get the value in controller, create a hash map and put that value in hashmap.
Then pass that hashmap in pageContext.forwardImmediately method.
If you want to use that value in multiple pages, then put that in session variable.
--Sushant -
How to pass a value from 1 mxml componet to the another mxml componet
I have created 3 mxml components. I am using 1st component as
a container component for other 2 components mean[ inside 1st
component i have placed 2 other components]. now i want to pass
selectedvalue from 1 component to another component.
say 1st component is
MyFirstComponent.mxml
2nd component is
MySecComponent.mxml
3rd component is
MyThirdComponent.mxml
now i have place 2nd & 3rd component in 1st component.
whenever i select an item from dropdown in 2nd component i want to
set/pass that selectedvalue to 3rd component public variable. how
can i achieve this.
MySecondComponent.mxml
[code]
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns:salesforce="
http://www.salesforce.com/"
creationComplete="login()">
<mx:ComboBox x="102" y="26" id="ddlDepartmentName"
cornerRadius="2" height="20"
fontWeight="bold" width="148"/>
</mx:Canvas>
[/code]
MyThirdComponent.mxml
[code]
<?xml version="1.0" encoding="utf-8"?>
<mx:HBox xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns:salesforce="
http://www.salesforce.com/"
creationComplete="login();">
<mx:Script>
<![CDATA[
import SubComponents.Department.DepartmentSummary;
public var departmentID:String = 10;
]]>
</mx:Script>
</mx:HBox>
[/code]
right now i am using hardcoded departmentID in 3rd component,
i want to remove the hardcoded value and i want to set the value
from 2nd components' on selectionChange.
When i select department Name from the comboBox which is
created in 2nd component i want to get the value in 3rd component.
how can i achive this..
want to set the departmentID in 3rd component to the
ddlDepartmentName.selectedValue in 2nd component. when i change the
selected value in 2nd component i want to display the department
information in 3rd component after setting the departmentID
Waiting for your valuable answer.This code seems to work:
------------------ MyThirdComponent.mxml -------------------
<?xml version="1.0" encoding="utf-8"?>
<mx:HBox xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns:salesforce="
http://www.salesforce.com/">
<mx:Script>
<![CDATA[
[Bindable]
public var departmentID:String = new String();
]]>
</mx:Script>
<mx:Text text="{departmentID}"/>
</mx:HBox>
------------------------- MySecondComponent.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns:salesforce="
http://www.salesforce.com/">
<mx:Script>
<![CDATA[
public function changeHandler():void{
this.parentApplication.my3rd.departmentID =
ddlDepartmentName.selectedLabel;
]]>
</mx:Script>
<mx:ComboBox x="102" y="26" id="ddlDepartmentName"
cornerRadius="2" height="20"
fontWeight="bold" width="148" change="changeHandler()">
<mx:ArrayCollection>
<mx:String>Bananas</mx:String>
<mx:String>Apples</mx:String>
<mx:String>Oranges</mx:String>
</mx:ArrayCollection>
</mx:ComboBox>
</mx:Canvas>
----------------------- Test.mxml
<?xml version="1.0"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns:comp="components.*" creationComplete="init()">
<mx:Script>
<![CDATA[
public function init():void{
my3rd.departmentID = my2nd.ddlDepartmentName.selectedLabel;
]]>
</mx:Script>
<comp:MyThirdComponent id="my3rd"/>
<comp:MySecondComponent id="my2nd"/>
</mx:Application> -
How to copy line items from one expense report to the next
I travel to the same project/destination every week so in PR05, I was able to just copy the previous expense report for the new week and edit the expense values. Now, when I book travel, the air line booking starts a new expense report entry.
Is there a way to copy the employee-paid expenses to the GetThere-generated trip entry expense report, i.e. just copy the line items from one expense report to another that already exists. I guess that would be a merge function.Hi Tom,
Here are two alternative solutions:
Alternative 1:
If you copy the expense report before you book the services (flight, hotel …)
in GetThere, then the airline or hotel bookings will not start a new expense
report but will be assigned to the copied expense report.
Alternative 2:
This alternative is a bit laborious.
Shift the start date and end date of the expense
report that was automatically created by
your flight booking for next week (e.g. Calendar Week (CW) 47) to the week after next week (e.g. CW 48).
Copy the expense report of the previous week (e.g.
46)
Afterwards open the expense report that you
moved to CW 48 and click on the tab strip itinerary
Now assign the bookings (flight, hotel …) to the
expense report of CW 47 by clicking on the button assign to existing trip
Later delete the expense report in CW 48
Get back to me if you have any questions concerning the alternatives outlined
above.
Note:
These solution alternatives are only available for customes using HTML5 UIs. -
I don't seem to be able to move from one simple keynote slide to the next.
I just have text on each - like notes for a presentation.Howdy tommmy,
To go to the next slide in a Keynote for iOS presentation, tap on the screen with one finger. See this article for information about gestures in Keynote -
Keynote for iOS (iPad): Touchscreen basics for Keynote
Tap
Using one finger, quickly and firmly touch the screen and then lift your finger. Use this gesture to select an object or activate a button. You also use this gesture to advance to the next slide when playing a presentation.
Thanks for using Apple Support Communities.
Best,
Brett L
Maybe you are looking for
-
I need to get back in touch with UK based technica...
Background - a few weeks ago I received help on the forum in connection with my modem re-booting, usually in the early morning. I got in touch with Bt Customer support who helped by getting the noise level back down but I still suffered from re-booti
-
Instrumentation/Automation Engineer needed for company based in Fort Lauderdale, FL
The Instrumentation Automation Enginner will work with the electrical motor control, variable frequency drives(VFD's), sensors, Programmable Logic Controllers (PLC's), robotics, temperature, pressure, level, and flow devices, PID loops, human machine
-
Can I open a new folder w/ firefox
instead of having to use my desktop to create a new folder to store files. is there a way to do it using my browser?
-
Flash animations run slowly on Internet Explorer 9
Hi all, I recently downloaded and installed the Internet Explorer 9 RC from Microsoft and updated my Flash player to version 10,2,152,26 . I am having issues running Flash animations and other Flash objects within that browser. All of them,
-
Seagate 500GB 7200RPM HD in my BRAND NEW 15.4" 2.66GHZ Macbook Pro
Hi, I just purchased a new 15.4" 2.66GHZ Macbook Pro (with SD card slot) and swapped in a Seagate 500GB 7200RPM HD. I've noticed a few pauses accompanied by various "clicks" from the HD. I tried Apple's Firmware update, but it doesn't work with this