Passing values to custom OVS dynamically

Hi,
I am trying to select the Address from a list of addresses available for an Account while creating Visit for that account.
In Visit QC, I populate the Account field using the standard Account OVS. After this, I want to show the list of Addresses available for this selected account in my custom Address OVS.
Currently I have configured my OVS to Customer XBO. In this, I am passing Account ID as the parameter to the query and I am displaying the Account ID and the Addresses for that account.
But this OVS displays all the Account IDs and only 1 address for all the available Accounts.
As can be seen from the below screenshot, I have selected Account= ‘Lowes’ in Visit QC. But when I click on Addresses OVS, it displays me entire list of Accounts.
Is there a way in which I can dynamically pass the Account ID of the account selected in the Visit QC to my custom OVS? I also need to display all the Addresses available for this AccountID.
Please suggest how this can be achieved.
Thanks,
Ambuja

Hi,
By Custom OVS what I mean is, I have created an OVS based on standard Customer object. I am not using the public OVS. I have not defined any Custom BO. Do I need to define a custom BO for this?
I am using Customer XBO to show the list of Addresses as shown in below screenshot.
ValueHelpQuery is bound to InternalID of Customer.
I have not configured any Inport or Outport. Actually I am implementing the OVS for the first time. Could you please guide me on what needs to be configured in the Inport. I referred the PDF documentation for configuring OVS but did not find much info on configuring Inport and other event hanldlers.
Thanks,
Ambuja

Similar Messages

Pass value to a field dynamically..

Hi Experts,
Can any one solve this issue?.
I want to pass value to different fields dynamically..
Egu2026
I have work are having fields
lwa_table-var1,
lwa_table-var2,
lwa_table-var3,
lwa_table-var4,
u2026.. up to lwa_table-var100.
My logic is I have to pass l_tot value .. based on the last letter like below.
if l_tot value is 1 we have pass to lwa_table-var1
if l_tot value is 2 we have pass to lwa_table-var2
if l_tot value is 3 we have pass to lwa_table-var3
if l_tot value is 100 we have pass to lwa_table-var100.
<removed_by_moderator>
Thanks in advance.
Regards,
Kumar.
Edited by: Julius Bussche on Aug 12, 2009 8:41 AM

Hi Friend,
U can do Following.....
data: text(12) type c.
data : num type n.
data: int type i.
data: begin of wa_test,
      var1,
      var2,
      var3,
      var4,
      end of wa_test.
FIELD-SYMBOLS <fs_wa> TYPE ANY.
do 4 times.
int = int + 1.
num = int.
CONCATENATE 'wa_test-' 'var' num into text.
ASSIGN (text) to <fs_wa>.
<fs_wa> = num.
UNASSIGN <fs_wa>.
enddo.
write : wa_test-var1 , wa_test-var2 , wa_test-var3 ,wa_test-var4 .
ouput will be :     1 2 3 4.
Lets take Your Scenario----
>>>>>>>>>>>>>>>>>
Data: begin of lwa_table,
Var1,
Var2,
Var3,
u2026..
u2026u2026
Var100,
End of lwa_table.
Data: l_tot type i.
u2022     For example l_tot = 36.
u2022     Then u want to pass the same to lwa_table36.
For this do followingu2026..
Now Define-->>>
data: text(13) type c.
data : num type n.
FIELD-SYMBOLS <fs_wa> TYPE ANY.
*Now till now we done all the data definitions now u have to do following to pass it dynamically,
l_tot = 36.
Num = l_tot.
CONCATENATE lwa_table-' 'var' num into text.
ASSIGN (text) to <fs_wa>.
<fs_wa> = num.
UNASSIGN <fs_wa>.
Write : lwa_table-var36.
Output will be 36.
Hope this resolves ur issue,
Regards,
Akash Rana
Edited by: AKASH RANA on Aug 12, 2009 8:53 AM

Can we pass values to custom headers through HTTP bindings in BPEL?

hi,
I have an urgent requirement where I have to pass values to custom headers of HTTP url through HTTP bindings in bPEL.
Is it possible? Say I have a http url http://localhost:80/test.
I need to post xml over the above HTTP url as well pass some values to the Custom Headers Variables.
Can I achieve this functionality thorugh BPEL or not?

Hi,
My requirement is exactly the same as yours, can you please let me know what did you do to overcome the Oracle Forms Default change password screen.
Regards,
Praveen

How to call & pass values to custom page from seeded page table region

Hi All,
can anyone tell me how to call & pass values to custom page from seeded page table region(Attribute is not available in seeded page VO)
it is urgent. plssss
Regards,
purna

Hi,
Yes, we do this by extending controller, but you can also try this without extending controller.
1. Create Submit Button on TableRN using personalization.
2. Set "Destination URI" property to like below
OA.jsp?page=/<yourname>/oracle/apps/ak/employee/webui/EmpDetailsPG&employeeNumber={@EmployeeId}&employeeName={@EmployeeName}&retainAM=Y&addBreadCrumb=Y
Give your custom page path instead of EmpDetailsPG.
EmployeeId and EmployeeName are VO attributes(Table Region)
If you dont have desired attribute in VO, then write logic in your custom page controller to get required value using parameters passed from URL path.
In this case, only personalization will do our job. Hope it helps.
Thanks,
Venkat Y.

How to Pass parameter to Custom Scheduler dynamically

hi ,
I am new to OIM.
Need your help in passing parameters dynamically to Custom Scheduler.
I have created Custom Scheduler by extending Task Support.
I have registered the plugin through API , using PlatformService.registerPlugin() method.
As I need to send the parameter(s) to this CustomScheduler, I have defined them in Metadata (CustomScheduleTask.xml) file as below and got it imported into DB
through weblogicImportMetadata.sh script by providing the path of the file.
<scheduledTasks xmlns="http://xmlns.oracle.com/oim/scheduler">
<task>
<name>CustomScheduleTask</name>
<class>org.schedule.custom.task.CustomScheduleTask</class>
<description>Fetch details of the given user_id</description>
<retry>5</retry>
<parameters>
<string-param required="true" helpText="Login Name">Login Name</string-param>
</parameters>
</task>
</scheduledTasks>
Iam able to import this plugin as well as register the plugin successfully. Now I have defined a job to which this Custom SchedulerTask is mapped.
Now in order to run this job(schedule task) I need to provide Login name( or id) which needs to be send as a parameter for the scheduler to get executed.
But while defining the job with this Schedule Task on OIM console, I was not able to define or pass parameter to this job. hence parameter is null in
CustomSchedule 's execute method .
Kindly help me how to pass parameter dynamically while running the scheduler from OIM console so that the execute method would be able to receive it.
Thank you in Advance.
Regards,
Kumar

Hi,
When you have created the schedule job for your custom schedule task, you should see your Login Name textfield in the schedule task. If not, then there verify your schedule task xml.
In your schedule class code, add:
public void execute(HashMap arg0) {
          final String METHOD_NAME = "execute :: ";
          logger.debug(CLASS_NAME + METHOD_NAME + "Entering Method - execute");
          try {
               String LoginName = arg0.get("Login Name");
Regards,
Sunny

How To dynamically change values in custom form

Hi,
Requirement is to change values in custom form dynamically that are passed by Global variables through standard form .
I have used forms personalization to call custom form and passing some parameters to custom form using global variables.
Now i have to change values displayed in custom form(already opened) when user moves from one record to another record.
I cannot change the standard form.Only i have write logic in custom form that dynamically changes values as user moves from one record to another in standard form.
Global variables values will be different for each record.
Pls let me know how i can achieve this.
Regards
Udit

Udit,
Your question should be posted to the Enterprise Business Suite (EBS) forum. This forum is dedicated to non-EBS forms development.
Craig...

Passing Value Dynamically in a string

hi All ,
i have a requirement in which i have to pass value of a parameter dynamically to a string
e.g.
param = 10.
data : txt type string .
txt = 'value of param'.
should give a result
value of 10.
here i need to have the value 10 of param in the string ,
how can this be done dynamically
thanks in advance
Abhishek

Hi Abhishek,
if you know where is the word 'param' in the sentence, you could play with the field symbols.
Good luck
Frédéric

Issue while Passing Values to Variable Dynamically in ODI

Hi All,
We are trying to pass values to ODI variable dynamically. The value passed is File path. We are successfully able to achieve this when we are passing the relative path i.e. ‘..\demo\xml’ but while we are trying to pass the absolute path i.e. ‘D:\ODI\oracledi\demo\xml\’ we are getting the below given error in the Load step of the interface..
com.sunopsis.sql.SnpsMissingParametersException: Missing parameter
at com.sunopsis.sql.SnpsQuery.completeHostVariable(SnpsQuery.java)
at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Googling for the same has yielded the following results :-
• if the file name has : in it then ODI will consider it as a binding variable rather path. .. So try relative path. – Relative Path is working but we need to achieve this by giving absolute path.
• make sure you are using LKM File to SQL rather SQL to SQL. – We have tried by 3 different LKMS—File to SQL, SQL to SQL and SQL to Oracle but the error is same in all.
Any pointers regarding the same will be very helpful.
Thanks In Advance.
Regards,
Abhishek Sharma

Hi Cezar,
Thanks for the response. The issue here is we are picking this path from a table. We have FILE_PATH column in one database table and in ODI variable we have given SQL query as 'Select FILE_PATH from tablename'. Then we are taking the refresh value of this variable and passing it on to our interface.
If the Path in table is given as relative path it works , else for absolute path it doesnt work. How can we achieve the solution recommended by you in this case. The FILE_PATH value in table may change, so we need to pick the file from whatever path it fetches from the select statement. Hence we cannot hard code it here.
Please suggest.
Thanks Again.
Regards,
Abhishek Sharma

Pass values dynamically to the WHERE clause in SFAPI

Hi there
We have a requirement to pass values dynamically (in the run-time of the interface) to the WHERE condition to our SFAPI query.
Eg -
SELECT person, personal_information, address_information, phone_information, email_information, employment_information, job_information, compensation_information, paycompensation_recurring, paycompensation_non_recurring, job_relation, accompanying_dependent,         global_assignment_information, direct_deposit, national_id_card, person_relation
          FROM CompoundEmployee
          WHERE last_modified_on >= to_date('LAST_RUN_DATE') AND
                       last_modified_on <= to_date('CURRENT_RUN_TIME')
LAST_RUN_DATE is stored in a custom entity for which we execute another OData query. The custom entity is updated with the CURRENT_RUN_TIME once the interface has been executed successfully. So the next time the interface is run it picks up the LAST_RUN_DATE from the custom OData entity.
SAP PO has the functionality to run a dynamic query for OData adapters. Refer to Note 2051137 - PI Successfactors adapter : Dynamic odata query and single synchronous sfapi query
Eg - select fields from position (this is what you state in OData query path in the comms channel; this is static); and you have an advanced tab in comms channel where you mention dynamicquery and set it to true (this points to a XSD which has the keyword TOP, SKIP & FILTER in it).
This gets the filter values passed from the BPM from another query (from a OData cust_table).
So the whole query is - select fields from position filter field a = x field b = y etc. Field a field b are fields in position that are you passing values x and y in run time of the interface.
SAP PO also has the advanced tab feature for SFAPI for dynamic query.
Question is -
how to use it?
has anyone implemented this before?
What does XSD will look like?
How do we pass values to the fields to the Where clause for SFAPI.
Any ideas are welcome!
Regards
Arijit Das

After you have added a new where clause on the detail VO, try re-executing VO's query by DetailVO.executeQuery()
If it doesn't work try re-executing the MasterVO's query after you have added the where clause on the detail

How to pass apex item value into custom xml for chart or guage?

Re-opening the old thread : Re: How to pass apex item value into custom xml for chart or guage?
Which was not answered.
Roel - Thanks. Its working - but in a semi quotes in the custom XML
<pointers>
<pointer value= '&P5_RUNNING_TOTAL.'
<label enabled="true">
<position placement_mode="ByPoint" x="50" y="15" />
<format>{%Value}{numDecimals:1}</format>
<background enabled="false" />
</label>
</pointer>
</pointers>This question was helpful for us to resolving one recent thread : AnyChart - set Dial axis intervals dynamically?
(Re: AnyChart - set Dial axis intervals dynamically?
Edited by: P.Ranish on Dec 13, 2012 6:23 AM

P.Ranish wrote:
Is there any update for this question ???
Edited by: P.Ranish on Dec 13, 2012 3:36 AMNo, And there won't be in the future.
Please stop posting followup's to old threads, if you have a real problem please search the forum first and post a new question with all information
Roel wrote:
Try using &P5_RUNNING_TOTAL. or #P5_RUNNING_TOTAL#Just to make it clear - this will only work if page is reloaded after setting the item values dynamically via AJAX

How to avoid popup & pass value dynamically in 'F4IF_FIELD_VALUE_REQUEST' ?

Hello Experts,
I am trying to test usage of f4 help function module.
We want to dynamically pass values from remote machines into the given input parameters of a Given Search help and receive the output into a table (no dialogs required .. so no pop ups )
I wrote a test program to just test if we can really do that at runtime ?
This program pops up the window of search help First I want to surpress that window and Second I have no clue
( How to pass the input parameters as value eg. 20 to a given field as we pass manually )
Can some one suggest something here ?
REPORT ZTEST_F4_TEST.
data lt_return TYPE TABLE OF DDSHRETVAL.
data ls_return TYPE DDSHRETVAL.
data lt_return_ddic TYPE TABLE OF zDDSHRETVAL.
data ls_return_ddic TYPE zDDSHRETVAL.
PARAMETERS ptable type tabname.
PARAMETERS pfield type fieldname.
PARAMETERS pshelp type SHLPNAMe.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
    tabname                   = ptable
    fieldname                 = pfield
    SEARCHHELP                = pshelp
*   SHLPPARAM                 = ' '
*   DYNPPROG                  = ' '
*   DYNPNR                    = ' '
*   DYNPROFIELD               = ' '
*   STEPL                     = 0
*    VALUE                     = ' '
    MULTIPLE_CHOICE           = 'X'
    DISPLAY                   = 'F'
    SUPPRESS_RECORDLIST       = 'X'
*   CALLBACK_PROGRAM          = ' '
*   CALLBACK_FORM             = ' '
*   SELECTION_SCREEN          = ' '
* IMPORTING
*   USER_RESET                =
TABLES
   RETURN_TAB                = lt_return
* EXCEPTIONS
*   FIELD_NOT_FOUND           = 1
*   NO_HELP_FOR_FIELD         = 2
*   INCONSISTENT_HELP         = 3
*   NO_VALUES_FOUND           = 4
*   OTHERS                    = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
data lv_count type i.
delete lt_return where fieldname <> pfield.
sort lt_return by fieldval.
delete ADJACENT DUPLICATES FROM lt_return COMPARING fieldval.

Hello Sim,
We will be exposing the Input parameters and Output lists of the SAP Search helps (simple search helps only) as input output of a Webservice.
So I need to understand how can we exploit the SAP Search Helps ?
What function modules can take these inputs as structures and can provide the output in form of a table ?
Regards,
Ravi

Pass Value from Excel to custom program

Hello,
I want to pass value from Excel to Custom Program being called in the Custom Integrator and i am using the Import in the Importer section but it is not getting passed.
Please advise and i am on R12.1.3.
Thanks

Pl do not post duplicates - Concurrent Program Parameter

Issue passing values to text symbols in Dynamic text PDF forms

Hello Everyone,
I am facing a problem related to Dynamic texts in Adobe PDF forms (Text node of type include text). I am able to pass the dynamic values to the Text node properties but i am not able to pass the values to Text symbols inside the Text node. When tested it says the field not found. I have the same structure and field in the CONTEXT as that of the text symbol. The problem i see is because in PDF the field names have $record.(fieldname) ?
Please share your thoughts if anyone has faced similar problem or know how to handle it.
Thanks a million in advance,
Chandu

Open the report up in the Designer and Click on Edit, Subreport Links. Likely what you can do is use Shared Variables to pass values from the main report to the subreport.
You need to do this in the report first. If you are using RAS then you can at runtime. If RAS is not available to you then no way in code.
See these samples:
Root Page
http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessIntelligence%28BusinessObjects%29+Home
Enterprise Samples (including managed and unmanaged ras)
http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsSDKSampleApplications
Non-Enterprise Samples
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsSDKSampleApplications
Exporting Samples (RAS)
http://wiki.sdn.sap.com/wiki/display/BOBJ/NETRASSDK+Samples#NETRASSDKSamples-Exporting%2FPrinting
Also refer to the DSK help files for the Engine or RAS and search on the subreportcontroller.
If you are using RAS I'll move your post to the SDK forum.
Thank you
Don

Passing values to a dynamic selection screen via a report

Hi,
I have the following problem and need to seek your expertise urgently.
In my program, I need to call another report by passing in parameters to the selection screen of other report. However, I could not pass values into a dynamic selection screen. I tried to use submit (report) with free selection but do not know how it works.
Currently, I tried calling the function RS_REFRESH_FROM_DYNAMICAL_SEL and FREE_SELECTIONS_RANGE_2_EX. Using the object the first function has returned to me, I tried to append values such as fieldname etc to it. However, I realised the field names of a dynamic selection screen keeps changing. So I would not know how to pass a particular value to a selection field.
Appreciate any help given.
Thanks,
CK

Hello CK,
Are you using logical database in your selection screen program attributes? If it is, look at include file DBxxxSEL for parameter named xxxDYNSE where xxx = logical database. Debug the program that has that dynamic selection, and look at field xxxDYNSE. This should give you a hint on how to populate the parameter when you submit the program.

JSP Custom Tags, Tag Handlers, Passing values

Multiple questions here while I try to work with custom tags (its a requirement):
From what I have had so far - I have a .tld file, a .java file and a .jsp page.
(this is not a working version as I just got it from a website)
platform: tomcat on an xp box.
I was wondering if we can pass the parameters that are passed to the the jsp page (like blah.jsp?param1=value1&param2=valu2 ) to the tag handler?
This is because the processing that I need to do in the handler would depend on what I have in the passed values.
Any help in letting me know where to place those files on the tomcat context root would help. Please see, I do have a couple of servlets running on the box also and they might be in the same context root.
Any good short tutorial link is also welcome as a short answer as I try to unravel the custom tags in jsp.

I am using TomCat 5.5
What I need to do using tags is to build a web-page on the fly by polling a couple of different tables in the database.
This is to be done using a jsp and custom tag (requirement) which would be able to handle any resultsets. We also have to come up with pageContext attribute names and supply column names as those attributes. Thus we will have to come up with the meta data file and a tag library descriptor as well.
I found a helloworld solution on a website and was trying to modify it to meet my needs. But I guess I under-estimated the work that needed to be done in this one.

Passing values to custom OVS dynamically

Similar Messages

Maybe you are looking for