Passing values to standard screen from an my internal

Hi Experts,
I want to pass values to the mb51 screen from my own internal table.
in the program for mb51 there is include programLMIGOTV4 where what is use of following
PBO module before start of LOOP.
METHOD pbo.
CALL METHOD super->pbo.
tv_goitem-lines = lcl_migo_globals=>kernel->s_status-lines.
ENDMETHOD.
Also how can see the method Kernel and what is the use of that....
Also when is the S_Status-lines update in the method Kernel.
Please help me to understand ASAP.
Thanks &Regards
Tejaswini

hi.
You can pass values by two ways:
1. use BDC option CALL TRANSACTION of the transaction MB51. But first you will have to see how it behaves during recording in SHDB.
2 . Another is use
SET PARAMETER ID 'MAT' FIELD WA_DATA-MATNR.
CALL TRANSACTION 'MB51'.
This would call the transaction with MB51 screen with material number initialised.
check out screen 1000 of prog 'RM07DOCS' for parameter id's of different fields.
WRK- for werks
LAG-storage location
CHA for batch and so on.

Similar Messages

How to pass a value to a standard screen from program

My requirement is to pass a value from the program to a standard screen.
I m using transaction CU01. i have to get the dependency name from the program and displayed in CU01 first screen, after tht i have to create a dependency.
Set parameter Id is not working for this screen so can any one help me to pass the value to standard screen from program.
its urgent
Thanks in advance.

hi,
consider filling up t_bdcdata for the single field and passing it as
call transaction 'CU01' using itab. as in BDC
santhosh

How to pass values to dashboard prompts from external applications

Any idea is well appreciated.
How can I pass values of dashboard prompts from external applications to the dashboard prompts so that the dashboard is prefiltered based on values sent by external applications.
Thanks in Advance!
Kris

Kris,
i am able to change the session variable and able to call the dashboard from external app, but i identified prompt value not changing. but Finally i am able to found a workaround for you.
Use the following URL and it explained here
http://localhost:9704/analytics/saw.dll?Dashboard&nquser=Administrator&nqpassword=Administrator&PortalPath=/shared/abcd/_portal/dash1&Options=rmf&DSN=madan
PortalPath is your dashboard location. /shared/abcd is folder where i saved dashboards. dash1 is my dashboard name.
internally this dashboard includes many reports that uses the session variable. after doing above this i am able to update the session variable to the value i have given in URL, DSN=value.
You may observer here that calls the dashboard and passes the value but its not updating the prompt value. so workaround for this is edit your prompt,
change the Default to - SQL Results and place the sql
SELECT CASE WHEN 1=0 THEN Markets.Region ELSE VALUEOF(NQ_SESSION.DSN) END saw_0 FROM Paint
again here Market.Region is column from presentation layer and Paint is subject area. After doing this step, your prompt always shows value in the session varible as default.
Now include reports and dashboard prompt in the dashboard and run this url from external applicaitons.
http://localhost:9704/analytics/saw.dll?Dashboard&nquser=Administrator&nqpassword=Administrator&PortalPath=/shared/abcd/_portal/dash1&Options=rmf&DSN=madan
it worked for me and blog this soon. if it works for you mark the question as answered and mark my replies as correct.
thanks
- Madan

How to call & pass values to custom page from seeded page table region

Hi All,
can anyone tell me how to call & pass values to custom page from seeded page table region(Attribute is not available in seeded page VO)
it is urgent. plssss
Regards,
purna

Hi,
Yes, we do this by extending controller, but you can also try this without extending controller.
1. Create Submit Button on TableRN using personalization.
2. Set "Destination URI" property to like below
OA.jsp?page=/<yourname>/oracle/apps/ak/employee/webui/EmpDetailsPG&employeeNumber={@EmployeeId}&employeeName={@EmployeeName}&retainAM=Y&addBreadCrumb=Y
Give your custom page path instead of EmpDetailsPG.
EmployeeId and EmployeeName are VO attributes(Table Region)
If you dont have desired attribute in VO, then write logic in your custom page controller to get required value using parameters passed from URL path.
In this case, only personalization will do our job. Hope it helps.
Thanks,
Venkat Y.

How to get the screen value to custom screen from standard screen

Hi all,
I have a standard screen which is attached to a standard function group and a custom screen which is attached to a custom function group... Now my requirement is to get some field values from the Std screen to my custom screen ...
I have used the FM DYNP_VALUES_READ but its resuts in error...
in my current screen PBO i called this FM and given the prog name as the Std pgm name which being created while creating the screen from the function group and the screen number as the standard screen number...
Eg : Standard Function gp = FSBP_02
       Pgm name = SAPLFSBP_02
      Screen Naumber = 0220
Custom screen = 9001
Pgn Name = zname
in 9001 PBo i called
DATA: IT_DYNPFIELDS TYPE TABLE OF DYNPREAD,
       WA_DYNPFIELDS like line of IT_DYNPFIELDS.
WA_DYNPFIELDS-FIELDNAME = 'BP021-BUSINESS_Y'.
APPEND WA_DYNPFIELDS TO IT_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
   EXPORTING
     DYNAME                               = 'SAPLFSBP_02'
     DYNUMB                               = '0220'
    TRANSLATE_TO_UPPER                   = ' '
    REQUEST                              = ' '
    PERFORM_CONVERSION_EXITS             = ' '
    PERFORM_INPUT_CONVERSION             = ' '
    DETERMINE_LOOP_INDEX                 = ' '
    START_SEARCH_IN_CURRENT_SCREEN       = ' '
    START_SEARCH_IN_MAIN_SCREEN          = ' '
    START_SEARCH_IN_STACKED_SCREEN       = ' '
    START_SEARCH_ON_SCR_STACKPOS         = ' '
    SEARCH_OWN_SUBSCREENS_FIRST          = ' '
    SEARCHPATH_OF_SUBSCREEN_AREAS        = ' '
   TABLES
     DYNPFIELDS                           = IT_DYNPFIELDS
EXCEPTIONS
    INVALID_ABAPWORKAREA                 = 1
    INVALID_DYNPROFIELD                  = 2
    INVALID_DYNPRONAME                   = 3
    INVALID_DYNPRONUMMER                 = 4
    INVALID_REQUEST                      = 5
    NO_FIELDDESCRIPTION                  = 6
    INVALID_PARAMETER                    = 7
    UNDEFIND_ERROR                       = 8
    DOUBLE_CONVERSION                    = 9
    STEPL_NOT_FOUND                      = 10
    OTHERS                               = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
How Can i get that... Its important ... Please help me...

Hi,
    Try with the below FM
RS_REFRESH_FROM_SELECTOPTIONS
in your custorm program, check the SY-CPROG and SY-XPROG values, for the standard program name or directly pass the importing parameter for the above FM as SAPLFSBP_02.
Regards
Bala Krishna

How to display user define value in list screen from detail screen

Hello Experts
I am working on task in which i have to display the user define value on list screen. like i have one list list screen which have one button for add..once i click on add which navigate to detail screen and detail screen has two fields one for ID AND other for name and detail screen has one button for save once i put value for id and name and click on save button which will navigate to previous list screen and those values which should be display on list screen.
Regards:
Sumit

Hi Sumit,
To navigate to the Master page on button click , you need some thing like,
oSplitApp.toMaster("masterpage_id");
to understand the navigation for Master/Detail page , have a look at,
http://help.sap.com/saphelp_uiaddon10/helpdata/en/df/adb6b7247e4826b0fcde472b029840/content.htm
Also to pass value from Detail page to Master page, you can use a Global variable to store your values on click of the Save button. For eg. You may have a global JS file which both Master and Detail page can access like App.Js, Application.JS etc.
After navigating to the Master page, you can read the Global variables and show it on your Master page.

Pass value at run time from one structure to diffrent structure

hi experts.
i m workin on crm domain and faching problem to pass value from one stucture to another . problem is that i want the output in xml file so i need all the values interm of segment.
initialy i have this structure.
DATA: BEGIN OF struc1 occurs 0,
       ST_ORDERADM_H TYPE CRMT_ORDERADM_H_WRKT,
       ST_PRICING    TYPE CRMT_PRICING_WRKT,
       ST_ORGMAN     TYPE CRMT_ORGMAN_WRKT,
       ST_PARTNER    TYPE CRMT_PARTNER_EXTERNAL_WRKT,
      END OF struc1.
and using fm CALL FUNCTION 'CRM_ORDER_READ' i got values on this structure at run time.
MOVE LT_ORDERADM_H to STRUC1-ST_ORDERADM_H.
MOVE LT_ORGMAN      to STRUC1-ST_ORGMAN.
MOVE LT_PARTNER     to STRUC1-ST_PARTNER.
MOVE LT_PRICING     to STRUC1-ST_PRICING.
and after that using
try.
CALL TRANSFORMATION id
    SOURCE data_node = STRUC1
    RESULT XML xmlstring.
    CATCH cx_st_error.
endtry.
CLEAR:   tab_xstring,
         lv_filename,
         lv_path,
         lv_fullpath,
         lv_user_action.
REFRESH: tab_xstring.
lv_bytes = XSTRLEN( xmlstring ).
IF lv_bytes > 0.
lv_xstring = xmlstring.
DO.
    APPEND lv_xstring TO tab_xstring.
    lv_xcnt = XSTRLEN( lv_xstring ).
    IF lv_xcnt > xsize.
      lv_xstring = lv_xstring+xsize.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
now it convert to xml file .
problem is it gives me value of all field associated with standared structure.
but client requirment is that he want only selected values of given structure.
so i think i make a new structure for given value but i m not able to get values in new structure.
thanks

Hi,
create a structure in se11 with following fields
ST_ORDERADM_H.
ST_ORGMAN.
ST_PARTNER.
ST_PRICING.
for example as STRUCT2.
data : begin of i_struct2 occurs 0.
   include structure struct2.
data : end of i_struct2.
MOVE LT_ORDERADM_H to i_STRUCt2-ST_ORDERADM_H.
MOVE LT_ORGMAN to i_STRUCt2-ST_ORGMAN.
MOVE LT_PARTNER to i_STRUCt2-ST_PARTNER.
MOVE LT_PRICING to i_STRUCt2_PRICING.
then
try.
CALL TRANSFORMATION id
SOURCE data_node = i_STRUCt2
RESULT XML xmlstring.
CATCH cx_st_error.
endtry.

How to pass values one by one from Multiline container in workflows

Hi,
I have used a structure in my workflow as multiline container.
I want to pass values 1 by 1 to the workflow but not all the three values..so how do i pass the values 1 by 1 rather all at a time..
kindly suggest me
Thanks,
Shanky

Hi,
Create a new container with type I and set the initial value as 1. EX : Index.
Pass your Multi-line container and this index container to a new method. Get the multi line container data's into an internal table
and read the data based on the index and append the data's to a new multiline container.
Second time increment the index container by 1. So now the value of index container will be 2.
Pass the multiline container value and index to method. now it will read the second record from the internal table.
Call the method using the loop step type.
Thanks,
Viji.

Passing values to APEX items from external site

All,
Is it possible to pass values to APEX page items from an external web site?
For example, I have an external web site where users type in a username and password into fields. When they click the 'log-in' button in the external site, I would like to have those values passed to the APEX log-in page. If possible, I would like to have the APEX log-in occur 'invisibly' and the user taken directly to the home page of the app. If that's not possible, it would be nice to simply have the 'user name' and 'password' fields filled in on the APEX side.
I'm using APEX 3.0.
Thanks in advance for any help!
Alex

Hello Alex,
>> Is it possible to pass values to APEX page items from an external web site?
The general answer is yes. You can use the f?p syntax to set the value of any APEX item - http://download-uk.oracle.com/docs/cd/B32472_01/doc/appdev.300/b32471/concept.htm#sthref185 .
In your specific example, the main question should be is it wise? The mere fact that you are using a login process suggests you have something to protect in your application. The f?p syntax uses a plain text for the items’ value, which means that the user name and password will be completely exposed.
Regards,
Arie.

Passing value of View Attribute from standard page to custom page

Hi everyone,
I have a custom page which needs to be called from a standard page. Now this custom page is based on some parameters whose value will depend on the dynamic selection by user. So how to get the currently executed value from VO.
For ex: Vendor Id , contact id and site Id all are to be fetched which are present in three different VOs. When user select particular vendor, contact and site these values will change accordind to selection.
Here do I need to extend the controller and application module of the standard page or it can be done by passing parameters in destination URI of submit button.
I tried using parameters in destination URI of submit button as {VO.ViewAttributeName} and printing in custom page but it was printing " {VO.ViewAttributeName}" as it is.
Please help..
Thanks in advance.
Edited by: Kittu on Nov 18, 2010 1:05 PM

Hi Meher,
I tried doing it by destination uri but it was not taking the value.
I tried CO extension with the following code in my extended CO :
public class ExtendedByrCntDirCO extends ByrCntctDirCO
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
/* I WANT TO CREATE TEH SUBMIT BUTTON PROGRAMATICALLY */
OASubmitButtonBean oasb= (OASubmitButtonBean)pageContext.getWebBeanFactory().createWebBean(pageContext,"BUTTON_SUBMIT");
oasb.setID("SubmitBtn");
oasb.setUINodeName("SubmitBtn");
oasb.setEvent("xxSubmitButton");
oasb.setText("Submit");
webBean.addIndexedChild(oasb);
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
String url = "OA.jsp?page=/oracle/apps/aeap/Vendors/webui/VendorContactsPG";
OAApplicationModule am =
(OAApplicationModule)pageContext.getApplicationModule(webBean);
OAViewObject VendorsVO = (OAViewObject)am.findViewObject("VendorsVO1"); // To retrive the attribute of a particular VO
Number VendorId = (Number)VendorsVO.getCurrentRow().getAttribute("VendorId"); *// But here its showing null pointer exception*
HashMap params = new HashMap(1);
params.put("VendorId", VendorId);
String strEvent= pageContext.getParameter(EVENT_PARAM) ;
if ( strEvent.equals("xxSubmitButton"))
pageContext.setForwardURL(url,
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
params,
true,
OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
So how can I retrive the value from VO . Is there any another way . Plz help...
Edited by: Kittu on Nov 19, 2010 12:46 PM

Passing values to between Pages from a PLSQL Procedure in third Page

Hello,
I have a form divided into 3 pages. The first Page is used to select Template which is used to call a screen Page 54 and Page 55 (Wizard Based screen).
From Page 55 (third page) of my application, When I click on Finish Button (Submit Button), a PLSQL Procedure is called which inserts values in 5 to 6 tables on a schema. The Success message include Article &DOCID. successfully Added.
When I return to the first Page which is Page 24, it displays no value for DOCID.
Sample Example =
DECLARE
DOCID VARCHAR2(30);
BEGIN
INSERT INTO SURE_DOCUMENT
DOCUMENT_ID
, DOCUMENT_TYPE
, TITLE
, STATUS
, DISTRIBUTION
, ARCHIVE_REVIEW_DATE
, CONTENT_TYPE
, IMPACT
, SKILL_LEVEL
, SOURCE
, SERVER_MIN_VERSION
, SERVER_MAX_VERSION
, REFRESH_INTERVAL
, LAST_REFRESH
, FOLDER_ID
, TOPIC_ID
, NOTE_POSITION
, OWNING_SITE
, MODIFY_NUMBER
, VERSION_STRING
, ALIAS
, EXTKEY
, FORMAT_MODIFIER
, DELETED
, CREATED_BY
, CREATED_DATE
, CREATED_SITE
, UPDATED_BY
, UPDATED_DATE
, UPDATED_SITE
VALUES
( SURE_DOCUMENT_SEQ.NEXTVAL || '.1'
, :ARTICLE_TYPE
, :TITLE
, :STATUS
, :DISTRIBUTION
, SYSDATE
, 'TEXT/PLAIN'
, 'LOW'
, 'NOVICE'
, 'ADHOC'
, :RDBMS_MIN_VERSION
, :RDBMS_MAX_VERSION
, NULL
, NULL
, :FOLDER
, :TOPIC
, NULL
, 1
, 1
, NULL
, NULL
, NULL
, NULL
, 'N'
, HTMLDB_CUSTOM_AUTH.GET_USER
, SYSDATE
, 1
, HTMLDB_CUSTOM_AUTH.GET_USER
, SYSDATE
, 1
COMMIT;
SELECT SURE_DOCUMENT_SEQ.CURRVAL INTO DOCID FROM DUAL;
INSERT INTO SURE_DOCUMENT_CONTRIBUTORS
DOCUMENT_ID
, SURE_SEQUENCE
, USER_ID
, CONTRIBUTION_DATE
, CONTRIBUTION_ROLE
, MODIFY_NUMBER
, REASON
, DELETED
, CREATED_BY
, CREATED_DATE
, CREATED_SITE
, UPDATED_BY
, UPDATED_DATE
, UPDATED_SITE
VALUES
( DOCID
, 1
, 'SKOPPALK.UK'
, SYSDATE
, 'Contributing Author'
, 1
, 'Contributing Author'
, 'N'
, HTMLDB_CUSTOM_AUTH.GET_USER
, SYSDATE
, 1
, HTMLDB_CUSTOM_AUTH.GET_USER
, SYSDATE
, 1
INSERT INTO SURE_DOCUMENT_LANGUAGES
DOCUMENT_ID
, SURE_SEQUENCE
, LANGUAGE
, DELETED
, CREATED_BY
, CREATED_DATE
, CREATED_SITE
, UPDATED_BY
, UPDATED_DATE
, UPDATED_SITE
VALUES
( DOCID
, 1
, 'USAENG'
, 'N'
, HTMLDB_CUSTOM_AUTH.GET_USER
, SYSDATE
, 1
, HTMLDB_CUSTOM_AUTH.GET_USER
, SYSDATE
, 1
INSERT INTO KREW_WORKFLOW
DOCUMENT_ID
, PRIORITY
, OWNER
, REVIEWER
, MODERATOR
, ASSIGNED_DATE
, DUE_DATE
, CHECKED_OUT_BY
, CHECKED_OUT_DATE
, VERSION_STRING
, DESCRIPTION
, AUTHORS
, COMMENTS
, UPD_DATE
, COPYSTATUS
, COPYDISTRIBUTION
, COPYFOLDERID
VALUES
DOCID
, 3
, DECODE(:OWNERS, NULL, 'UNASSIGNED',:OWNERS)
, DECODE(:REVIEWER, NULL, 'UNASSIGNED',:REVIEWER)
, DECODE(:MODERATOR, NULL, 'UNASSIGNED',:MODERATOR)
, SYSDATE
, SYSDATE + 7
, NULL
, NULL
, 'SKOPPALK.UK'
, :TITLE
, :AUTHORS
, :COMMENTS
, SYSDATE
, :STATUS
, :DISTRIBUTION
, :FOLDER
INSERT INTO SURE_DOCUMENT_KEYWORDS
DOCUMENT_ID
, SURE_SEQUENCE
, KEYWORD_TYPE
, KEYWORD
, DELETED
, CREATED_BY
, CREATED_DATE
, CREATED_SITE
, UPDATED_BY
, UPDATED_DATE
, UPDATED_SITE
VALUES
( DOCID
, 1
, 'NOTE'
, :KEYWORDS
, 'N'
, HTMLDB_CUSTOM_AUTH.GET_USER
, SYSDATE
, 1
, HTMLDB_CUSTOM_AUTH.GET_USER
, SYSDATE
, 1
INSERT INTO SURE_DOCUMENT_REFERENCES
DOCUMENT_ID
, SURE_SEQUENCE
, REFERENCE_SOURCE
, REFERENCE_DOCUMENT_ID
, REFERENCE_TYPE
, REFERENCE_DESCRIPTION
, DELETED
, CREATED_BY
, CREATED_DATE
, CREATED_SITE
, UPDATED_BY
, UPDATED_DATE
, UPDATED_SITE
VALUES
( DOCID
, 1
, 'NOTE'
, DOCID || '.1'
, 'NOTE'
, :REFERENCES
, 'N'
, HTMLDB_CUSTOM_AUTH.GET_USER
, SYSDATE
, 1
, HTMLDB_CUSTOM_AUTH.GET_USER
, SYSDATE
, 1
INSERT INTO SURE_DOCUMENT_PLATFORMS
DOCUMENT_ID
, SURE_SEQUENCE
, PLATFORM_ID
, MIN_VERSION
, MAX_VERSION
, DELETED
, CREATED_BY
, CREATED_DATE
, CREATED_SITE
, UPDATED_BY
, UPDATED_DATE
, UPDATED_SITE
VALUES
( DOCID
, 1
, :PLATFORMS
, NULL
, NULL
, 'N'
, HTMLDB_CUSTOM_AUTH.GET_USER
, SYSDATE
, 1
, HTMLDB_CUSTOM_AUTH.GET_USER
, SYSDATE
, 1
INSERT INTO SURE_DOCUMENT_PRODUCTS
DOCUMENT_ID
, SURE_SEQUENCE
, PRODUCT_ID
, COMPONENT_ID
, MIN_VERSION
, MAX_VERSION
, DELETED
, CREATED_BY
, CREATED_DATE
, CREATED_SITE
, UPDATED_BY
, UPDATED_DATE
, UPDATED_SITE
VALUES
( DOCID
, 1
, :PRODUCTS
, NULL
, NULL
, NULL
, 'N'
, HTMLDB_CUSTOM_AUTH.GET_USER
, SYSDATE
, 1
, HTMLDB_CUSTOM_AUTH.GET_USER
, SYSDATE
, 1
COMMIT;
END;
The Success message is as follows:
Article &DOCID. Created/Updated Successfully

Shivanand,
There's no need to post that much code when you could create a very short test case that demonstrates only the problem you are having.
You're using &NAME. notation on something that isn't a page or application item. You can't reference PL/SQL variables that way (or any other way) outside the PL/SQL scope. For your situation, you could create a page item named P55_DOCID and assign it a value in the PL/SQL process (:P55_DOCID := DOCID;), then reference &P55_DOCID. in HTML areas like the success message.
Scott

How to use Ajax Web method in v4.master page to pass value to server side from JavaScript?

Hi,
I am customizing my v4.master page. Just adding jquery "Multiselect" dropdown .
I want to pass selected value to code behind to perform some database activities.
Here no code behind for me. Just i have added "Server side script" as a code behind.
How to pass the value?
Anyone give me the idea on it.
Thanks & Regards
Poomani Sankaran

try using asp.net variables as per below links:
http://sharepoint.stackexchange.com/questions/88777/how-to-use-a-variable-in-the-masterpage
http://sharepoint.stackexchange.com/questions/80074/how-can-i-use-the-current-language-as-a-variable-in-my-masterpage
https://msdn.microsoft.com/en-us/library/ms476046%28v=office.12%29.aspx
http://www.dotnetfunda.com/articles/show/1507/how-to-access-master-page-variableproperty-from-the-content-page
Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing

Passing values to a loop from a string sepated by commas

This string i am passing to a stored procedure.
The string which contains id seperated by commas like(string a='100,101,102,103')
This values i have to seperate and pass it to a query
I have to do the query for all the values(i think by looping )
select dept from employee where id =100

Since row by row processing is something to be avoided, because it uses needlessly many resources, we suggested a SQL only solution. You can still encapsulate this in a stored procedure like this:
SQL> create table my_departments
2 as
3 select * from departments where 1 = 2
4 /
Tabel is aangemaakt.
SQL> create procedure insert_into_my_departments (p_list_called_a in varchar2)
2 as
3 begin
4    insert into my_departments
5    ( department_id
6    , department_name
7    , manager_id
8    , location_id
9    )
10    select department_id
11         , department_name
12         , manager_id
13         , location_id
14      from departments
15     where department_id in
16           ( select to_number
17                    ( substr
18                      ( s
19                      , instr(s,',',1,level) + 1
20                      , instr(s,',',1,level+1) - instr(s,',',1,level) - 1
21                      )
22                    )
23               from (select ',' || p_list_called_a || ',' s from dual)
24            connect by level <= length(p_list_called_a) - length(replace(p_list_called_a,',')) + 1
25           )
26    ;
27 end insert_into_my_departments;
28 /
Procedure is aangemaakt.
SQL> select * from my_departments
2 /
Er zijn geen rijen geselecteerd.
SQL> exec insert_into_my_departments(p_list_called_a => '100,110,120,130')
PL/SQL-procedure is geslaagd.
SQL> select * from my_departments
2 /
DEPARTMENT_ID DEPARTMENT_NAME                     MANAGER_ID     LOCATION_ID
            100 Finance                                    108            1700
            110 Accounting                                 205            1700
            120 Treasury                                                  1700
            130 Corporate Tax                                             1700
4 rijen zijn geselecteerd.Regards,
Rob.

Passing values to HU03 screen - customer fields

Hello All,
I have created a new sub area under TAB-Status in HU03 screen with customer fileds(Z Fields) using BADI BADI_HU_DIALOG. But I dont know where I can pass the values into these Z Fields.
Can anybody help me regarding this.
Thanks in advance.
Best Regards,
Sasidhar Matli.

Solved on my own.
We have to write the code in PBO module of the newly created screen.
-Sasidhar Matli.

Passing values to session variables from another application

Hi,
From an external application we are passing username and password for accessing the OBIEE Dashboard.In the url call we are passing NQUser and NQPassword. This is working fine.
To setup data level security we need to pass region id list also as request object. Then we can filter the tables by the value in the region id list for that user. If we use external table to pass the home_id list then the application is working fine by setting up row-wise init block. But we need request object from an external application to send the list. How can we accept the list from OBIEE RPD?
In the documentation it mentions about session variables - non system. But it requires an init block. How can we create a variable that accepts the values when user logins just like NQUser and NQPassword.
Please suggest.
Thanks.

Try this ...
http://oraclebizint.wordpress.com/2007/07/30/customizing-obi-ee-%E2%80%93-go-url-parameters/
In this blog entry you'll find at the bottom ...
Hello, Can you please explain how to pass parameter values in the url. For example, I want to run an answers query and pass into the url something like this: &Region=West
Venkatakrishnan J Says:
August 22, 2007 at 7:36 am
Yes, this absolutely possible. You can get the details from the Web Services guide since it has all the necessary examples and more explanation. Thats why i did not include it in the blog. You can get it from page 213 of the Docs http://download.oracle.com/docs/cd/B40078_02/doc/bi.1013/b31766.pdf

Passing values to standard screen from an my internal

Similar Messages

Maybe you are looking for