Password MySQL (Tiger 10.4)

I have a few questions.
1). When I try to log into MySQL (sudo /Library/StartupItems/MySQLCOM/MySQLCOM start)
UNIX asks for a password. The Problem is that I have not created a password, or should I have?
All I did was download a package, mysql-5.0.51a-osx10.4-powerpc.dmg, from the website: http://dev.mysql.com/get/Downloads/MySQL-5.0/mysql-5.0.51a-osx10.4-powerpc.dmg/f rom/pick
I double clicked on the icons and installed the applications.
2) I was able to connect to MySQL Server after by typing /usr/local/mysql/bin/mysql. I receive this:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 9
Server version: 5.0.51a MySQL Community Server (GPL)
Type 'help;' or '\h' for help. Type '\c' to clear the buffer.
But it appears that I have limited access.
Should I create a password? Was one created?
Thoughts?
Best,
J

If your speaking of Resetting the original administrator account password, bottom of this page...
http://docs.info.apple.com/article.html?artnum=106156

Similar Messages

What is the password for tiger guest

what is the password for tiger guest on ciso connect

justonce2314 wrote:
what is the password for tiger guest on ciso connect
Open Cisco Connect and on Guest Access Window you will see there the settings for your GUESTACCESS NETWORK.
♥'s TECHNICAL

Leopard won't accept WPA password where Tiger accepted

I've been doing all sorts of diagnostic experiments trying to figure out why I can't wirelessly connect under Leopard using WPA encryption while I was able to do so successfully under Tiger... With Leopard, encryption turned off or WEP encryption works just fine but NOT WPA and that's the encryption I want to use.. I've finally done what I believe to be a consistent and well controlled experiment which is telling me that Leopard will not accept a WPA password that is perfectly acceptable under Tiger... They changed some of the wireless interface gui's between Tiger and Leopard but there is one that appears to be identical between the two and that is the Network Setup Assistant.app that is found (under either Tiger or Leopard) at /System/Library/CoreServices... And I also have a cloned version of my two week old Tiger (10.4.9) system with all my files contained on an external firewire drive. If I boot off that Tiger system and walk through the above mentioned Assistant, when I get to the place where it asks me to enter the WPA password, it accepts that password and moves forward to the next step 100% of the time. I've tried it many times... If I then reboot under Leopard, walk through precisely the same assistant and enter precisely the same password (I've typed it many times, used copy and paste many other times to ensure no typos), instead of connecting I get (100% of the time) a message that says "Sorry, The Password you entered is invalid".... I also notice that it takes a while (maybe 10 seconds) for it to come back with that error for whatever that might be worth... The reason the "100% of the time" above is important is because when I just go to Network in system preferences and walk through that wizard while trying to set up this WPA network, I usually get simply "connection failed" but if I just keep trying eventually it always says it connected (though in reality it never does)... And it never tells me that the password is invalid but this other wizard tells me that 100 % of the time... So when it tells me it connected, I will then go try to connect to a web page and it never works... So why it sometimes tells me it connects I can't say but reality, it never does and now I'm slowly becoming convinced it is because it never accepts my WPA password, never....
So does anyone out there know whether there is some particular format for WPA passwords??? My router is a NetGear WGU624... I've contacted NetGear about this and they are worthless... I might try them again now that I've learned that the password is NEVER being accepted but I don't hold much hope that they can help...
Any ideas about what might be going wrong with passwords under WPA in Leopard???
thanks... bob...

I've been pursuing the same issue for a few days and just found a resolution (but not the root cause). (Same symptoms seen by Jason Guinn's over on http://discussions.apple.com/thread.jspa?threadID=1195706) I upgraded my PowerBook and MBP just fine but my iMac had the problems you and Jason describe.
Dig it. This WPA2 password:
3R3HFVNGxe845xrk
Works for the PowerBook and MBP. But for some reason when I use that password from the iMac, I get the (broken) behavior described. Took my setup to the Genius and he reset my Airport Extreme base station and set the password to:
testtest
And the problematic behavior resolved. I got full bars and was able to ping and browse everything. I have since changed my password to something more secure. My advice is start with testtest and see if the problem resolves. Then experiment with some stronger WPA2 passwords that work for all your systems.
Incidentally, I had similar issues with the wireless on my TiVO when I set it up about six months ago. For some reason their system wouldn't accept the (long) WPA2 password I was using that the time. At that time I configured the shorter one (3R3HFVNGxe845xrk) for the sake of the TiVO. It's so odd that two vendors have had bugs exercised by particular key material. So wierd.

Password MySQL

Hello all,
I have done some searching on the forums, but I don't see
anyone with quite the same issue I'm experiencing.
I'm having an issue, with the way the password is checked
with the server.
When connected to the server I can see the users passwords
are encrypted. When the users password is normally entered, the log
in fails.
I.E. User1 Password123
However, if the hash string is entered, the login is
successful.
I.E. User1 8fb188f854ff0f1f8200c631ff9158dd
I hope that makes sense
This is a working data base, from a forum a friend and me
manage. It seems like there is a authentication step missing, but
I'm not sure where. Can anyone help please. =-/

Stinky Starfish escreveu:
> Hello all,
>
> I have done some searching on the forums, but I don't
see anyone with quite
> the same issue I'm experiencing.
> I'm having an issue, with the way the password is
checked with the server.
>
> When connected to the server I can see the users
passwords are encrypted. When
> the users password is normally entered, the log in
fails.
> I.E. User1 Password123
>
> However, if the hash string is entered, the login is
successful.
> I.E. User1 8fb188f854ff0f1f8200c631ff9158dd
Probably it has an error of programming.
Passwords are recorded in data bases, never encrypted, but,
yes,
codified. ( sha, md2, md4, md5, crc, etc... hashing ).
When an user enters a password, and this uses one of these
processes of
codification to be recorded in the data base, the entered
password must
be compared with this codified value.
The form used to get the password, must have a routine of
conversion for
the used hash and, this hash is what must be verified!
>
> I hope that makes sense
>
> This is a working data base, from a forum a friend and
me use. It seems like
> there is a authentication step missing, but I'm not sure
where. Can anyone help
> please. =-/
>
And now, it makes sense for you?
zerof
http://www.educar.pro.br/
Apache - PHP - MySQL - Boolean Logics - Project Management
Você deve, sempre, consultar uma segunda opinião!
Deixe todos saberem se esta informação foi-lhe
útil.
You must hear, always, one second opinion! In all cases.
Let the people know if this info was useful for you!

Reset Password in Tiger without Install discs?

Hey Mac geeks! Can you guys help me? I have a friends PMG4 and it has a problem. They got it from a used computer place and it came with a password on there which was not told told them b4 they purchased it. Its a PMG4 533 Mhz with 768mb of Ram running Mac OSX 10.4 since without the passwrd they cant update. Do you guys have any ideas I havent thought of. I tried some commands in command line but no results.
HELP!

[Topic : kmosx: I lost my admin user (Mac OS X 10.4 and earlier)|http://discussions.apple.com/thread.jspa?threadID=121786&tstart=0]
[Regaining lost admin status on OS X|http://www.salingfamily.net/trav/osx/regain_admin.html]
[Running Mac OS X Setup Assistant again|http://superpixel.ch/articles/running-setup-assistant-again>
[Running OS X Setup Assistant (another topic)|http://discussions.apple.com/message.jspa?messageID=9581230]
[Making the Setup Assistant reappear|http://discussions.apple.com/thread.jspa?messageID=607547] Amended by [rccharles|http://discussions.apple.com/message.jspa?messageID=10895943] January 2010
In the long run your friend will need OS installation discs. For one, they are required legally to run the OS. Second, should you need to reinstall the OS you will need them. In fact I would reinstall the OS right now because with a used machine you don't know where it's been or what's on it.
Message was edited by: Limnos

Is there a way to override the admin password in Tiger?

hi,
i have a 2004 eMac 1.25 GHz running OS X 10.4.11. however, i do not have the admin password, so i am not able to carry out admin tasks like installing new software etc. i was told that i can actually override this if i upgrade the OS to snow leopard. is that true? are there other ways to actually change the admin account or change the password?
thanks for any help.

Hi, do you have the 10.4.x Install Disc, you really need it.
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
It'll boot like a newly setup Mac, but all your stuff should still be there once filling out the stuff.

Admin password not working with latest Tiger upgrade on reboot.

Hi all,
I have just upgraded to the latest Tiger version and on rebooting to complete the install, I am asked for my password so Tiger can access the system.
My problem is that my password does not work, regardless of variations used.
When I hit "cancel" I can use the computer as normal however I guess the update process is not complete.
This very same password works with all other functions (software installs etc.)
If I restart the computer, Tiger again asks for the password.
Help! Thank you.

Same thing happened to me! See my post at http://discussions.apple.com/thread.jspa?messageID=1254801&#1254801. I still haven't recovered from this. I booted from the install CD and reset the password, but that didn't help. Finally I booted into single-user mode so I could look at log files. I keep seeing things like this in /var/log/system.log:
/System/Library/CoreServices/mcxd.app/Contents/MaxOS/mcxd: MCXDinitializeDirectoryServices: Unable to open directory services -14740
...DSGetCachedConfigInfo(): DSGeRecordList() == -14071
...DSGetCacheInfo(): DSGetCachedConfigInfo() == -14071
...* MCXD.etComputerInfo: Couldn't get cache info -14071
...DSGetComputerRecordsNoInit(): DSGetRecordList() == -14071
...DSGetComputerRecodsWithCache(): DSGetComputerRecordsNoInit(gues) == -14071
memberd[41]: dsFindDirNodes returned -14071, count = 0
memberd[41]: Couldn't find root user. Sleeping and trying again.
launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[66]: exited abnormally: Hangup
...etc... the common messages seem to be "dsFindDirNodes returned -14071" and "Couldn't find root user."
This totally *****! I expect my PC to break when I use Windows Update, but I expect (and have generally experienced) better from Apple!
HELP!!!!!

Unable to connect to MySQL database in Dreamweaver CS3

I have been working on this problem for hours and am getting
very frustrated. I hope someone can help me out.
My FTP server and MYSQL server have to use two different
hosts.
I will be using false information in this post but hopefully
someone can help me out.
FTP info
domainname.com
username
password
MySQL info
123.servername.com
dblogin
dbpass
port: 3306
Now im sure the problem lies with the Testing Server.
Server Model: PHP MYSQL
Access: FTP
FTP Host:domainname.com
host directory: web/htdoc (this is the folder which holds ALL
of the files which can be reached by domainname.com)
login: username
password: password
url prefix:
http://www.domainname.com
when i try to use this information and then add a database
using the (+) I get access denied errors.
I have tried using 'localhost' as the server and
'123.servername.com'
I should mention that I am able to connect to the database
remotely using the same information using software such as SQL
Maestro, so I know that it isnt the database.
can someone who has successfully done this kind of connection
please tell me what is supposed to go where, the help documents are
horrible at best.

This may, or may not, help...
For those using MySQL - Installing PHP and MySQL on Windows
XP
http://www.webassist.com/professional/products/solutionrecipes.asp

Java with MYSQL in Linux

i am using JSP in Linux Platform. when i connected to mysql with mysql driver for odbc by using the following code,
import java.sql.*;
public class TestMysql
public static void main(String args[]) {
try {
          Connection con;
          String connStr = "jdbc:mysql://localhost/test?user=root&password=mysql";
          Class.forName( "com.mysql.jdbc.Driver" ).newInstance();
          System.out.println("OK");
          con = DriverManager.getConnection( connStr );
          System.out.println("Again OK");
catch( Exception x )
x.printStackTrace();
i got the following exception
OK
java.sql.SQLException: Error during query: Unexpected Exception: java.io.CharConversionException message given: null
Nested Stack Trace:
** BEGIN NESTED EXCEPTION **
java.io.CharConversionException
STACKTRACE:
java.io.CharConversionException
at gnu.gcj.convert.Input_iconv.read(char[], int, int) (/usr/lib/libgcj.so.5.0.0)
at java.lang.String.init(byte[], int, int, java.lang.String) (/usr/lib/libgcj.so.5.0.0)
at java.lang.String.String(byte[], int, int, java.lang.String) (/usr/lib/libgcj.so.5.0.0)
at com.mysql.jdbc.SingleByteCharsetConverter.SingleByteCharsetConverter(java.lang.String) (Unknown Source)
at com.mysql.jdbc.SingleByteCharsetConverter.initCharset(java.lang.String) (Unknown Source)
at com.mysql.jdbc.SingleByteCharsetConverter.getInstance(java.lang.String, com.mysql.jdbc.Connection) (Unknown Source)
at com.mysql.jdbc.Connection.getCharsetConverter(java.lang.String) (Unknown Source)
at com.mysql.jdbc.StringUtils.getBytes(java.lang.String, java.lang.String, java.lang.String, boolean, com.mysql.jdbc.Connection) (Unknown Source)
at com.mysql.jdbc.Buffer.writeStringNoNull(java.lang.String, java.lang.String, java.lang.String, boolean, com.mysql.jdbc.Connection) (Unknown Source)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(com.mysql.jdbc.Statement, java.lang.String, java.lang.String, com.mysql.jdbc.Buffer, int, com.mysql.jdbc.Connection, int, int, boolean, java.lang.String, boolean) (Unknown Source)
at com.mysql.jdbc.Connection.execSQL(com.mysql.jdbc.Statement, java.lang.String, int, com.mysql.jdbc.Buffer, int, int, boolean, java.lang.String, boolean, boolean) (Unknown Source)
at com.mysql.jdbc.Connection.configureClientCharacterSet() (Unknown Source)
at com.mysql.jdbc.Connection.initializePropsFromServer() (Unknown Source)
at com.mysql.jdbc.Connection.createNewIO(boolean) (Unknown Source)
at com.mysql.jdbc.Connection.Connection(java.lang.String, int, java.util.Properties, java.lang.String, java.lang.String) (Unknown Source)
at com.mysql.jdbc.NonRegisteringDriver.connect(java.lang.String, java.util.Properties) (Unknown Source)
at java.sql.DriverManager.getConnection(java.lang.String, java.util.Properties) (/usr/lib/libgcj.so.5.0.0)
at java.sql.DriverManager.getConnection(java.lang.String) (/usr/lib/libgcj.so.5.0.0)
at TestMysql.main(java.lang.String[]) (Unknown Source)
** END NESTED EXCEPTION **
at com.mysql.jdbc.Connection.execSQL(com.mysql.jdbc.Statement, java.lang.String, int, com.mysql.jdbc.Buffer, int, int, boolean, java.lang.String, boolean, boolean) (Unknown Source)
at com.mysql.jdbc.Connection.configureClientCharacterSet() (Unknown Source)
at com.mysql.jdbc.Connection.initializePropsFromServer() (Unknown Source)
at com.mysql.jdbc.Connection.createNewIO(boolean) (Unknown Source)
at com.mysql.jdbc.Connection.Connection(java.lang.String, int, java.util.Properties, java.lang.String, java.lang.String) (Unknown Source)
at com.mysql.jdbc.NonRegisteringDriver.connect(java.lang.String, java.util.Properties) (Unknown Source)
at java.sql.DriverManager.getConnection(java.lang.String, java.util.Properties) (/usr/lib/libgcj.so.5.0.0)
at java.sql.DriverManager.getConnection(java.lang.String) (/usr/lib/libgcj.so.5.0.0)
at TestMysql.main(java.lang.String[]) (Unknown Source)
i have the database, hello.
The same code works well in Windows, But in Linux, the above exception.
By using the username root and password mysql , i can connect to mysql directly from the mysql prompt.
Pls help me..
I have already put the query 'access denied problem in Mysql' some day before. from the reply, i made some changes in user table(ie. set the password for [email protected].).After this change, this new Exception came..
The structure of my mysql.user table is
#     host                         user          password
1     localhost                    root          68d4f47c49a579c9
2     localhost.localdomain          root          68d4f47c49a579c9
3     localhost.localdomain
4     localhost
Pls help me.
Edited by: SUMESHBABU_R on Sep 30, 2007 11:36 PM

Well, at least the trace tells me that this issue is to be tracked back to the core of the MySQL JDBC driver and the Linux's implementation of JVM. It might be worth the effort to post this issue at their website/forum/issuetracker. It might also be worth the effort to tryout the newer MySQL JDBC driver 5.1, as it is written specific for JDK 6.0 (while MySQL JDBC driver 5.0 is targeted at JDK 5.0).

[Oracle][ODBC][Ora]ORA-01017: invalid username/password; logon denied

---cmd prompt------------------------
H:\>sqlplus scott/tiger
SQL*Plus: Release 10.2.0.3.0 - Production on Sun Mar 28 16:54:53 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>
-------------ASP -------------------------
<%@ Language="JScript" %>
<%
 var uname=Request.Form("un");
 var upwd=Request.Form("pwd");
 Response.Write("User Name is " + uname + " " + "password is " + upwd);
 var sql = "select * from emp";
 var conn = Server.CreateObject("ADODB.Connection");
 var rs = Server.CreateObject("ADODB.Recordset");
 conn.Open = "Driver={Oracle in OraDb10g_home1};DBQ=tcp;UID='uname';PWD='upwd';";
 rs.Open(sql, conn, 3, 3);
%>
------------------Error------------------
User Name is scott
Password is tiger
Microsoft OLE DB Provider for ODBC Drivers error '80040e4d'
[Oracle][ODBC][Ora]ORA-01017: invalid username/password; logon denied
/prc/main.asp, line 11
variable uname has valid username that is 'scott' and variable upwd as valid password ie 'tiger' both entered by the user.
with the same username and password i am able to connect to the database from the command prompt.
but when i tried using odbc through ASP(javascript) i am getting above error.
and one more thing if i mention username and password directly in UID and PWD it works but when i pass it through variables it wont work.
since variables have username and password it has to take from it directly...........manually i cant give,dynamically it has to take.
plz help me out....how i can pass the parameter to that UID and PWD.
conn.Open = "Driver={Oracle in OraDb10g_home1};DBQ=tcp;UID='uname';PWD='upwd';";
help plz
conn.Open = "Driver={Oracle in OraDb10g_home1};DBQ=tcp;UID='uname';PWD='upwd';"; --- does not work
conn.Open = "Driver={Oracle in OraDb10g_home1};DBQ=tcp;UID=scott;PWD=tiger;"; --- works
but i want the 1st statement to work........since user gives the password and username dynamically.
Thanks
Veeresh S

conn.Open("DSN=tcp;UID="+uname+";PWD="+upwd+";");
this solved me
thanks for all who had vied this..
veeresh

How secure is master password?

Hi
I have very sensitive information on my iBook. I can choose
master password after screen saver/sleep or FileVault.
FileVault encrypts the info which I feel uncomfortable with
as it may make it difficult to backup.
Can the password be removed by a someone who takes the
computer? Is there any way around the master password.
If the hard drive has to be erased to clear the password
then I feel safe with password.
I go to coffee shops alot, I am careful so far but someday I
may slip.
thanks in advance
Mark
iBook G4 Mac OS X (10.4.5) 750 mb ram

Hi, Mark.
While it is possible to remove the Master Password from a Mac on which user's Home folders are protected with FileVault, doing so does not permit one to then change the passwords on FileVault-protected accounts. One would still need to know the password for the user account.
It is important to choose good passwords. Tiger offers a password assistant that helps you choose good passwords.
If you don't want to use FileVault, using Encrypted Disk Images is the best and easiest route to encrypting and password-protecting select data on a Mac. There are two AppleCare Knowledge Base documents you should read in relation to encrypted disk images:
- "Mac OS X: About Encrypted Disk Images."
- "Mac OS X: How to create a password-protected (encrypted) disk image."
- "Disk Utility 10.5 Help: Creating a disk image."
You can even burn an encrypted disk image to CD or DVD.
The most important thing to remember about encrypted disk images is to never lose the password. If you lose it, you will never be able to open it. If you rely on the password being saved in your Keychain, and later format your drive, you lose the password saved in your keychain, so write it down and save it in a secure place, just in case. For added security, do not add the password of an encrypted disk image to your Keychain when this option is offered.
Note that some of the information above is from the "Security" chapter of my book, Troubleshooting Mac® OS X.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Username and password in SQL Plus

What happend to the Username/Password Scott/Tiger. I have installed Oracle9i, then i ran SQL-Plus, typed Scott in username and Tiger in Password. I only got ORA-12560 error. I also tried System/Manager, but got the same error. Can anyone help?
Best Regards:
Oskar Sundgot Overe

The error description is:
=================================
TNS-12560 TNS:protocol adapter error
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for proper protocol specification. Before
reporting this error, look at the error stack and check for lower level transport
errors.For further details, turn on tracing and re-execute the operation. Turn off
tracing when the operation is complete.
===================================
Did you start your Oracle service before trying to connect?
Are you able to run your listener successfully?
did you setup a TNSNAMES entry for your database?
did you try connecting to the database by using scott/tiger@<tnsnames entry>

Leopard prompts for 802.1X username and password instead of WEP password

hey!
so i got leopard on friday and i haven't been able to connect to my wireless properly since.
i have an old D-Link DI-624 (Revision B) router that i have protected with a WEP password. in tiger i never had any problems with this, but now instead of prompting me for a WEP password when i try to connect, leopard prompts me to enter username and password and below there is a dropdown entitled 802.1X with options automatic and TTLS-PAP.
if i try to enter my WEP password as the password, the connection fails.
i know that the issue is not the router because my girlfriend is still running tiger and has no issues.
i ran that login and keychain update and that didn't help. i also deleted that old airport driver file that other people had mentioned for other airport issues and that didn't do anything either.
any ideas??
thanks!!

I have this exact same problem.

How to set up a PHP/mySQL "server" in arch?

Hi,
I know its a wide question, and i may have to go to different howtos and such, but as this distro is different from the others there might be some differences in that.
If i want to run a PHP based site in mozilla and the site is hosted in my machine, do i need to do something real strange to make it work ?
if you can post any link to some info, it wont hurt. and yes i will google anyway!

sud_crow wrote:If i want to run a PHP based site in mozilla and the site is hosted in my machine, do i need to do something real strange to make it work?
I am running Apche/PHP/MySQL on my machine and simple to setup. Few things requires to know. It can be done in different way. This is how I do including how to test the server(s). Host name is: "localhost". If anything is missing, please let me know.
INSTALL:
pacman -S apache
pacman -S php
pacman -S mysql
APACHE:
1. Add the following line in /etc/httpd/conf/httpd.conf :
LoadModule php4_module /usr/lib/apache/libphp4.so
AddModule mod_php4.c
AddType application/x-httpd-php .php
2. Add line in /etc/host :
127.0.0.1 localhost.localdomain localhost
3. Edit /etc/rc.conf :
# Networking
HOSTNAME="localhost"
4. Run in terminal (root):
# /etc/rc.d/httpd start
5. Edit /etc/httpd/conf/httpd.conf (close "AddModule mod_php4.c"):
LoadModule php4_module /usr/lib/apache/libphp4.so
# AddModule mod_php4.c
AddType application/x-httpd-php .php
6. Add line in /etc/rc.local (to start at boot):
/etc/rc.d/httpd start
Test Apache:
http://localhost/
PHP:
1. Edit /usr/etc/php.ini (open the mysql extension):
extension=mysql.so
Test PHP with a simple script:
<html>
This is a test. Say hello to Arch:

<body>
<?php
$myvar = "Hello Arch Linux";
echo $myvar;
?>
</body>
</html>
Save the file as "test.php" and copy to /home/httpd/html/
Test PHP:
http://localhost/test.php
MySQL:
1. Run in terminal:
# /etc/rc.d/mysqld start
2. Add line in /etc/rc.local (to start at boot):
/etc/rc.d/mysqld start
Test MySQL
Run in terminal (don't enter any password):
# mysql -p
Note: Change the /var/lib/mysql directory to user "mysql" if not getting MySQL to run.
For more information (if new in PHP/MySQL):
http://hotwired.lycos.com/webmonkey/99/21/index2a.html

MySQL 5.0 driver for Hibernate

Hi all,
I try to learn HIbernate, I try the example onhttp://www.roseindia.net/hibernate/runningexample.shtml
and I have Mysql 5.0 install and create adatabase Hibernatetutorial, and table contact ,
but I got error on Cannot open connection
I guess I had mistake on driver
if I don't load mysql-connector-java-5.0.3
what should I do , to build the connection?
Thank you

Hi all,
Thank you for the reply, I use eclipes to run hibernate programmer
I add mysql-connector-java-5.0.3-bin to my lib file then it work.
but I have the following questions
1) <property name="hibernate.connection.driver_class">com.mysql.jdbc.Driver</property>
<property name="hibernate.connection.url">jdbc:mysql://localhost/hibernatetutorial</property>
<property name="hibernate.connection.username">root</property>
<property name="hibernate.connection.password">mysql</property>
<property name="hibernate.connection.pool_size">10</property>
<property name="show_sql">true</property>
<property name="dialect">org.hibernate.dialect.MySQLDialect</property>
<property name="hibernate.hbm2ddl.auto">update</property>
if I add 3306 on it, I know that is the default port I did not change it
how come it not work?
and I found mysql-connector-java-3.1.6-bin.jar and mysql-connector-java-3.0.16-ga-bin.jar if I deleat those two jar file, the whole package not work too ?
Why I need this two jars
thank you

Password MySQL (Tiger 10.4)

Similar Messages

Maybe you are looking for