PasswordGenerator for a user after Self Registration in Identity Server-OAM

Hi,
I want to have a logic such that, when a user is created through a self registration page, the userPassword attribute should be automatically generated for him and it should be sent as a mail notification to him.
Please provide some solution that whether this can be done in Identity Server or not and how to do it ?
Regards.

Reading the documentation, it sounds to me like if you have either an Accessgate, or a webpass protected by a webgate, then yes, this can be done.

Similar Messages

Adobe Reader Pro 9 requires password for every user after seciurity updates?

Everytime I installe any Adobe Reader Pro seciurity updates like 9.4.3 and 9.4.4 on our Macs 10.6.6 and 10.6.7,
I had to input admin password for every user as reader is stoppng on install updates screen,
We have some hotmacs that are shared so it's a bit of a pain. Users don't have admin acess
to be able to install software on them.
How do I resolve this?
Here's what I tried. None of these things resolved the problem for me.
Repair disk permissions.
Restart the Mac.
Repair Adobe installation

Hi Sorry, the product in qusitons is Adobe Acrobat Pro 9.4.4 and 9.3.4 updates.
If you launch Acrobat Pro as the admin user, then authorise when requested, does that fix the problem for all users?
Or does this happen every time, for each user?
It does prompt for password for every user, thefore my flustration we have multiple editors using a Hotmac.
And we have to enter the password at least one time for every user after stupid seciurity update.
Presumably, Acrobat is trying to write to a location that Standard users don't have permission for.
Standard users don't have admin access to Mac but still I find adobe behevior very annoying.
I think this is normal enterpirse practise.
What happens if you allow write access to the Acrobat application folder and subcontents? Make sure you know what you're doing and how to restore it.
Would try this but still I would expect adobe to fix it updates.
Thanks,

All the SSIS Packages are not editable to the all users after deploying to the other server

Hi All,
I am using sqlserver2012.
How to make all the SSIS Packages are not editable to all users after deploying to the other server. is there any way to achieve this,
if yes, could share the information how to do....
Thanks in advance....
RamarajuC

Typically, you change the protection level as listed in the following steps:
During development, leave the protection level of packages set to the default value,
EncryptSensitiveWithUserKey. This setting helps ensure that only the developer sees sensitive values in the package. Or, you can consider using
EncryptAllWithUserKey, or DontSaveSensitive.
When it is time to deploy the packages, you have to change the protection level to one that does not depend on the developer's user key. Therefore you typically have to select
EncryptSensitiveWithPassword, or EncryptAllWithPassword. Encrypt the packages by assigning a temporary strong password that is also known to the operations team in the production environment.
After the packages have been deployed to the production environment, the operations team can re-encrypt the deployed packages by assigning a strong password that is known only to them. Or, they can encrypt the deployed packages by selecting
EncryptSensitiveWithUserKey or EncryptAllWithUserKey, and using the local credentials of the account that will run the packages.
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

Synchronization of R/3 User with self Registration in Portal

Dear All,
In Enterprise portal, we have activated self registration. So that user can register to the portal. We have a scenario that once the user is created in the portal through self registration, the same user Id should be generated in R/3. How do we achieve this in the portal?
Kindly help us for the same.
Regards,
Alpa

I was reading SAP certification material just now and have a similar question from my client and looking for answers.
I am writing part of information here so that you can do further research: Please update here what was the result of future understandings and if this worked? Ahh have to type all cant copy from the file
To enable sso b/w sap ume and abap based system, users should ideally have same user id's in both the systems. Replicating usre accnts to relevant sap systems is one meathod to ensure the same user ids.
The data is replicated only from ume to sap system and nt vice versa.
UME accmplishes replication by transmit of XML documents.'
Prerequisites:
Ume supports replication of user data to abap sys with release 4.6D or higher. you can replicate to a maz of 3 systems.
users are created with a de-activated pwd in backend so they shud always logon thru ume in portal and access backend by sso logon tickets.
Procedure:
start config tool
2. choose swich to config editor mode
3. navigate to cluster_data_server_cfg_services
4.switch to edit mode
5.double click on com.sap.security.core.ume.services property sheet
6.specify receiving sys, sending sys, and define sys conn. info. for sap sys
7 save property sheet
8 restart cluster for changes
9. add the sending sys. to sap sys acl list. this is done in sap sys via a data browser against the table smum_acl
After all these steps, create a user in EP and see it being present in R3.
PLZ write back for clarfications or doc, or just to let us know the results and conclusions.
Thanks
ANkur agarwal
SAP Portal consultanat

Question about ISE guest user account self registration

Dear Sir,
We will plan guest solution for my wireless network ( we have WLC5508 and 1142 access point ), our requirement is :
1. guest user access to an wireless guest SSID, open browser, it will redirect to web-auth page.
2. The web-auth page have a url and if user click the url, guest user then connect to another web page, guest user can input some information ( for examples : username, email, cell phone ,,, ) to create guest user account self. The expiration of the user account fix to one day.
3. the username and random password created for the guest user then send by SMS or email to guest user.
4. Guest user can use the username and password he received to login web-auth page to use guest wireless network
5. User activity information ( user create, login/logout, expire time, user IP address ... ) should be log.
Please help to verify the ISE with base license can meet our requirement. ( especially item 2 & 3 )
Best Regards,

Hi,
Guest registration is covered with base licenses.
Here is some material that will bring you up to speed:
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11637/ps11195/qa_c67-658591.html
Base:
Capabilities: Basic network access and guest access
Network deployment support: Wired, wireless, and VPN
License prerequisite: None
Perpetual license
Licenses are available for 100, 250, 500, 1000, 1500, 2500, 3500, 5000, 10,000, 25,000, 50,000, and 100,000 endpoints
Tarik Admani
*Please rate helpful posts*

Branding the confirmation message after Self Registration in OIM

Hi All
Can you please let me know how can I brand (change) the confirmation message I am getting after the user having the Self registration .
I want to change the following message
Congratulations, testuser
Your registration request has been sent.
Your registration tracking request number is: 38
You can use this tracking number to check the status of your registration in the Track Request section.
Registration Summary:
Name: testuser
Email Address: [email protected]
User Login: testuser
Thanks

Change the two line in two file Agent.properties & Agent_en.properties on each node if it is cluster.
find these wo line and change.
Note[REGISTRATION_REQUEST_SUCCESS].text = Your registration request has been sent. Your registration tracking request number is: {0}
 
Note[REGISTRATION_CONFIRMATION_TEXT].text = Congratulations, {0} Your registration request has been sent. Your registration tracking request number is: {1} You can use this tracking number to check the status of your registration in the Track Request section. Registration Summary: 
Take a back up of oim.ear. Also you have to know packing and unpacking of jar and war
These file you can find under
$OIM_ORACLE_HOME/server/apps/oim.ear/iam-consoles-faces.war/WEB-INF/lib/OIMUI.jar//oracle/iam/selfservice/uself/agentry/resources/
Restart your OIM manage server.
HTH.

Not Register after Self Registration in Portal

Hi everybody,
We are using the self registration functionality, but we don´t want to register after registration. We want that the self registration sends the e-mail with an auto generated password, and after the user checks the mail and know the password, he login to the portal.
Is this possible?
Thanks in advance,
Luis Jorge Castro

what do u mean by we dont want to register after registrations...
The email thing can easily be done either from you SAP R3 system configurations or else configure SMTP in you EP landscape.
in sys admin you need to give the settings and path to you smtp server.
Thanks
Ankur

Changing the sequence of roles/groups for Portal users after Login

Hi
We are at EP 7.0 SP11.
We have developed custom role for ESS, MSS, EIC and Reports etc.
Now when all the 3 roles are assigned to any user, the sequence of the display is generally
Employee Self Service, Manager Self Service and then EIC.
We need to change this sequence in Dev QA and production environment for some users preferably (or for all portal users), so that the 1st page which loads in portal after user logs in , is not necessary ESS.
The requirement can also be considered as, we need to change the default page which displays after user logs in.
Does someone have any idea how can we achieve this ?
Looking forward for your response.
Thanks
Neha

Hi Neha,
Add custom Welcome page/Home page(eu_role) and Sort Priority property as per Koti Reddy.
Hope it helps
Regards
Arun

How to set a common page for all users after loging on?

hi all,
Now "My Dashboard" is the default page after logon.
i want to set a default home page for all users. users can see the home page after loging on.
how to change the default dashboard from "My Dashboard" to "Home page" for all users?
thanks,
dan

Hi,
Steps:
Tried to set default dashboard for all the users.
1. Created a session init block
2. Used data source as select '/shared/SH Test/_portal/Test1' from dual
3. Assigned this value to PORTALPATH session variable
4. In Presentation services > Administration > My account > Default dashboard should be set to 'default'. Then only the dashboard specified in init block will be displayed otherwise My account will override the init block.
5. Save the changes made to rpd.
5. Logout and relogin to see if it is working fine. it is working perfectly fine.
For details please refer the GSC replication document. But it is for all the users.
if customer would like to have user/group based home page.
1. They may need to have 2 separate tables.
i. Group_path_tab with 2 columns. Group_id, portal_path
Have group wise portal path for all the groups
ii. User-group map table
Group_id, Group_name, user_id
User should be part of some group.
2. Then in the init block write the sql should be something like this
select A.portal_path from Group_path_tab A, User_group_map B
where B.user_id = :USER
and B.Group_id = A.Group_id
SO based on USER session variable, it will try to identify the group and then the portal_path.
Finally assign this value to PORTALPATH session variable.
ref:
http://total-bi.com/2011/01/obiee-11g-change-default-dashboard/
Thanks!

Preference Panes - Install for all users, after the fact?

Is there any way to get an already installed Pref Pane to install for all other users once it has been installed for the main account? I am hoping for a way that doesn't require uninstalling the current Pref Pane and reinstalling, some have settings I don;t wan't to lose for the main account.
PowerMac G4 Dual 1.25, MacBook 1.83 Mac OS X (10.4.7) 2 Gb RAM : 250 Maxtor, 80 & 250 WD int. drives : Mighty Mouse : dual mon.

Thanks for the reply.
The app (Bamboo Dock) has installed in the root applications folder. When I'm logged in as the administrator I can see the proper icon in the apps folder and run it. however, when I log on as my son I can see the app but the icon is the default icon with the A and the pencil on and the app won't run.
I didn't have a choice where to install and the app did not ask me if I wanted to install for all users.
I was wondering if I could run the installer app from the terminal with sudo, then I would be giving the installer app the authority to write the receipt? I don't know if this would work or how to do it if it would.
Stuart

How to make Adobe acrobat feature to convert SAP Pages to PDF available for multiple users connected to the same Citrix server

Hi,
In my previous endeavours to solve this business requirement where multiple users will be able to use the Adobe acrobat feature to convert SAP pages inside SAP to PDF, I was told that it is not possible to do this for multiple users at the same time. However I have found an article according to which it says it is possible. Could you check it once and let me know if this article can be used for implementing the requirement stated above as this link clearly indicates that Adobe Acrobat is supported on Citrix.
Please find the link below where it states it is adobe acrobat is supported in Citrix for multiple users.
http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/citrix.html.

1. What is the Acrobat feature that you mean? There's nothing specific to SAP included with Acrobat.
2. Yes, some Terminal Server configurations appear supported (check carefully). All users of the terminal server will need a license, so far as I know - total licenses = total individual people using.

Need help in setting up Group Policy for same user in local system and Terminal server

Hi All,
Currently our remote users are using our network using VPN client over internet.
They are generally at their home computer and doing VPN as they have to work only in one RDP server for application.
We actually have a OU created for these RDP users and assign then some strict policy like they can not use any other .exe,they can not user any explorer ,they can not even use windows explorer when they are on RDP they just use one exe of their application.
Now what my management want is they want their home computers in Domain and want them to login via their same credentials they are using for RDP but they don't want them to restrict in their home computers with any strict policy.
Now my confusion is how can I configure different policies for same users or same OU.
Can any one guide me please...

you can achieve this fairly easily with group policy.
create an OU and put your remote desktop servers in that OU.
configure both user and computer policies in a group policy and link it to that ou.
you need to enable loopback mode - you may want it in merge or replace depending on your other policies you have. Probably replace though I would guess. this is set in the computer configuration > admin templates > system / group policy section.
now remove the policy you have currently setup for your users on the users OU containing the rdp users. If you want you can move these users back to your main users OU.
when your users login to the RDP server the settings in the user section of the GPO linked to the RDP Servers OU will apply.
when the user logs in to their own computer the policies from the user OU and computer OU will apply - but not the more restrictive RDP OU.
hope that makes sense.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Safari quits unexpectedly for one user after Mavericks upgrade

2.33 GHz Intel Core 2 Duo 15" Macbook Pro circa mid-2009
OS X 10.9.4
Safari 7.0.5
After the Mavericks upgrade Safari will always stay open for about 30 seconds before crashing and saying "Safari quit unexpectedly". Furthermore, unless I am looking in the wrong place it is not generating a crash log - I have looked in ~/Library/Logs. I have reset Safari and uninstalled all extensions (had ClickToFlash and Adblock). Using a different account on the same machine Safari runs fine. I have done some googling around but have been unable to resolve this.
Thanks for any help,

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

How do I display peronalized photo recordsets for seperate users after they have logged in?

Hi everyone,
I am using Dreamweaver CS3, MacBook Pro Leopard 10.5.6 and MAMP 1.7.
I have created a login system using the instructions from David Powers book The Essential Guide to Dreamweaver CS3, for a photgraphy website.
I have uploaded two pages from my login system login_success.php and username.php.
I am trying to achieve a situation where after the client has logged in successfully, they will be presented with a recordset of their own personal wedding photo's filtered from the image filenames in the database.
The username.php page is displaying one set of wedding photo's for client A, however when I click on client B's username listed in the list menu, then click the link for username.php, client A's photo recordset is still displaying, not client B.
How can I get the right photo recordset to display for the right client? Do I have to create separate recordsets for all of the different clients photos?
Please could someone help me with this, as I am going round in circles.
Thanks for your time.

Heya,
read your thread title; got the just of your desire and disregarded your post. Use a filtered recordset filtered by session variable of MM_username to differentiate between logged in-users info displayed on page. So database table should have a column for username id and you simply filter your recordset based off the session variable of the user id and there you go - your recordset results will be displayed based off logged in users' id.

Exchange OWA Page Blank For Random Users After Mailbox Moves

We have three Exchange server. msexch1, msexch2, msexch3. msexch1 is currently offline. msexch1 and msexch have the CAS and MBX roles installed and are in a DAG. We moved all mailboxes from msexch1 to the other two servers. Since then we have users reporting
that when they logon to owa they get a blank page. The resulting url is owa/auth.owa. The domain we use is exchange.ourdomain.com. The fqdn of each exchange server is msexch2.ourdomain.com, etc. We use round robin dns for our exchange servers, therefore we
have two entries for exchange.ourdomain.com. For the purposes of this question lets say the ip of msexch2.ourdomain.com is 10.10.10.52 and msexch3.ourdomain.com is 10.10.10.53 and we have two entries in our dns for exchange.ourdomain.com, one for 10.10.10.52
and the other 10.10.10.53.
When a user experiences this issue I have found that when I ping exchange.ourdomain.com to determine which exchange server they are "connected" to; if I force them to use the other one they are then able to access owa just fine. For example, I
have a user whom is getting a blank page after they logon to owa. I ping exchange.ourdomain.com which returns 10.10.10.52 for an ip address, which tells me they are connected to msexch2.ourdomain.com. When I enter in the url https://msexch3.ourdomain.com/owa
to force them to logon using the other server, they are able to owa owa without any issues. When I use the url https://msexch2.ourdomain.com they receive a blank page after logon (as expected because this is the server they are trying to contact via dns exchange.ourdomain.com)
I have tried recreating both owa virtual directories which did nothing. I am at my wits end here and would greatly appreciate any assistance.

Hi,
According to your description, I understand that OWA get blank after move mailbox to another mailbox server, and you deploy DNS round robin in your environment.
If I misunderstand you concern, please do not hesitate to let me know.
It may be caused by OWA proxy cannot work correctly, please try below steps to double check:
1. Get a mailbox place in msexch3 and login OWA with
https://msexch3.ourdomain.com/owa.
2. Get other mailbox place in msexch2 and login OWA with
https://msexch3.ourdomain.com/owa.
If the steps 2 cannot proxy URL to https://msexch2.ourdomain.com/owa, it may be the key reason.
Please clarify the environment of your Exchange:
1. Which version are you used?
2. Check the authentication of OWA: Get-OwaVirtualDirectory | FL Identity,*URL*,*Auth*
OWA is configured to use integrated windows authentication on each virtual directory, and the external URL under is blank.
Also, please run below command to double check the health of Outlook Web App service:
Get-ServerHealth “msexch3” |?{$_.AlertValue –Eq “Unhealth”}
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

PasswordGenerator for a user after Self Registration in Identity Server-OAM

Similar Messages

Maybe you are looking for