Past backups on time machine do not appear

hi,
i recently updated my leopard to 10.5.6 and all of the past backups on the right side of the time machine screen were gone!
the drive mounts fine and the computer recognizes that it is a time machine drive and DOES back up files. it just doenst show what's backed up on the drive.
the drive have once had a problem mounting that "Backup of ..." which i repaired using disk utility.
any ideas please?
thanks a bunch

What Mac do you have? (you might want to update your profile).
What sort of external drive do you have? Does it go into sleep mode when not used? That might be preventing your Mac (or at least TM) from finding it or mounting it when it wakes up.
If it's a laptop, does this happen only when you plug the TM drive in? Once you get the sparsebundle mounted, if you don't dismount/disconnect the drive for an hour, does TM back-up ok? If so, can you then see at least that backup in TM?
Whatever hardware you're on, are you starting and stopping TM manually, or just letting it run?
You might also want to look at your system log messages for the time of the actual backup -- there might be some clues there. Use the Console app in Applications/Utilities. Click Show Log List in the toolbar, then navigate in the sidebar to system.log (current) or system.log.0.bz2, etc., (previous).
When a TM backup starts, the first message should be either "Backup requested by user" or "Starting standard backup." Then several info & progress messages follow. Copy everything from that first message to the end and post it here.

Similar Messages

Time machine does not appear to backup an external HD. how do I get that included in the backup?

time machine does not appear to backup an external HD. how do I get that included in the backup?

In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section? If it's not "Mac OS Extended," Time Machine can't back up the volume.

The first time I connected my new My Passport portable hard drive to my Mac, the message asking if I want to use the drive to back up with Time Machine did not appear. What is the next step?

The first time I connected my new My Passport portable hard drive to my MacBook Pro, the message asking if I want to use the drive to back up with Time Machine did not appear. I would like to set it up to do this. What would my next step be?

Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Open Time Machine preferences to select this drive for use as the backup drive. Turn on Time Machine.

After install of Lion, secondary internal hard drive used for backup and time machine is not showing on the desktop.

After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...

I have a TB internal drive, but this is what it shows for memory slots:
Memory Slots:
ECC:    Enabled
DIMM Riser B/DIMM 1:
Size:    2 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x0000
Part Number:    0x000000463732353642363145353830304600
Serial Number:    0x00000000
DIMM Riser B/DIMM 2:
Size:    2 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x0000
Part Number:    0x000000463732353642363145353830304600
Serial Number:    0x00000000
DIMM Riser A/DIMM 1:
Size:    1 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x48594D5035313241373243503844332D5335
Serial Number:    0x42076007
DIMM Riser A/DIMM 2:
Size:    1 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x48594D5035313241373243503844332D5335
Serial Number:    0x4207631E
DIMM Riser B/DIMM 3:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser B/DIMM 4:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser A/DIMM 3:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser A/DIMM 4:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty

Time machine does not appear in Disk Utility

Time machine does not show up in Disk Utilities, connected by ethernet. I need to erase the disk. How to solve?

I am sorry - I simply do not understand your instructions!
I have 2 Time Capsules and have been using both. However a few days ago they quit working. I have had to turn off Time Machine because I am getting hourly alerts that back-up failed because there is not enough space. It does not delete old backups to provide additional space. I am willing to erase both to try to get them working again but I cannot figure out how to erase and setup the drives. Hence I turned Time Machine off.
There is nothing wrong with the MBP internal hard drive. "Sparse bundle" is total Greek to me! My wifi network appears to be working properly. The internal HD is mounted in Disk Utilities and verified as working properly. I am a long time user of Apple but I am still a novice (Level 1)!
Perhaps I should start a new thread.

Time Machine does not appear to auto delete old backups

I would like old backups to be automatically deleted, but so far does not appear to have occurred as I have not received any warnings. I have checked the box in the setup dialog box to do so. I have only 60GB remaining and receive warnings from Tech Tools that the free space threshold is at 2% remaining.
Does the drive have to be fully exhausted before older backups are automatically deleted (causing the warning), and if so should I turn off the Tech Tools warning for remaining disc space for that drive?
I am using an OWC Mercury Elite AL Pro 2TB external drive with an eSATA connection. Our typical business files can range from 100 to 300MB each. In the Apple Support Mac 101 Time Machine article it states "As your backup disk begins to fill up to its capacity, Time Machine intelligently deletes the oldest backups to make room for newer ones (and will alert you if the "Warn when old backups are deleted" option is selected in Time Machine preferences)." To date, this warning has not appeared making me think no deletions have occurred.
Thanks for any thoughts, Scott

Scotttt wrote:
I would like old backups to be automatically deleted, but so far does not appear to have occurred as I have not received any warnings. I have checked the box in the setup dialog box to do so. I have only 60GB remaining and receive warnings from Tech Tools that the free space threshold is at 2% remaining.
Does the drive have to be fully exhausted before older backups are automatically deleted (causing the warning)
The oldest backup(s) won't be deleted until there isn't room for a new one. And "warning" is a bit misleading -- when there isn't enough space, the backup will fail, without deleting anything, until you deselect the option. See #C4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Note that this has changed for Snow Leopard; it does the deletion(s) automatically, then sends a notice.
and if so should I turn off the Tech Tools warning for remaining disc space for that drive?
Yes. That accomplishes nothing. Time Machine manages it's space automatically.
To date, this warning has not appeared making me think no deletions have occurred.
That's not strictly true; it applies only when Time Machine has to delete your oldest backups to make room for new ones. But it also deletes "expired" backups every time it does a new one. See #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

Time Machine does not appear to have my machine back ups past 9 days ago ? It backs up everyday to a Lacie 3.0TB drive that has 500GB free still , and yet I cannot find anything earlier that 01.03.2012 ?

I back my iMac to a lacie 3.0TB drive since November last year , there is still room for 0.5TB yet all I can find to my horror is that the earliest back up is 01.03.2012 ?

gavin136 wrote:
What I expected was larger older files to be removed
No, it deletes entire backups, one at a time.
SO I guess that means that I need something ridiculous in size to use as a bakc up ?
That's one possibility. The other is to change your strategy.
Are you backing-up lots of intermediate files? If so, you might consider excluding the folder(s) where that's done, and only backing-up a few semi-finished versions, or perhaps the final product.
Or, exclude the working versions from Time Machine, but back them up to a separate drive or partition with a different app, such as CarbonCopyCloner or SuperDuper. When a project is finished, and the final product is saved by Time Machine, just erase the "other" backup drive/partition.
There are the pink lines but I cannot get access to them past 01.03.2012
Ah, that's a different story. See the pink box in Time Machine - Frequently Asked Question #15A.

Deleting past backups from time machine disk

Hi all
I was wondering how do you delete old time machine backups?
Josh

Hi Barry,
I don't know about Josh's reasons, but I can give you two from my personal experience:
1) If you use an OS X Server that shares one of its drives as a Time Machine location for the clients, they will create sparsebundles (containing the Backups.backupdb) on the share. The also do backup thinning, but if the drive runs out of space and more than one backup is currently running it is possible that the backup fails due to free space suddenly being not available anymore. It usually works fine with only 1 concurrent backup.
2) You want to move your TM partition to another drive/partition and it is a little too big for that. Deleting some old backups can help.
Björn from frozen Germany

Time Machine will not delete.

Greetings.
The problem I'm having is that my 300GB backup disk is full. Time Machine says there is not enough room and it will not delete old backups to make room. How can I get it to do its thing?
Thank you.

dmac,
This might help...
*_“This Backup is Too Large for the Backup Volume”_*
First, much depends on the size of your Mac’s internal hard disk, the quantity of data it contains, and the size of the hard disk designated for Time Machine backups. It is recommended that any hard disk designated for Time Machine backups be +at least+ twice as large as the hard disk it is backing up from. You see, the more space it has to grow, the greater the history it can preserve.
*Disk Management*
Time Machine is designed to use the space it is given as economically as possible. When backups reach the limit of expansion, Time Machine will begin to delete old backups to make way for newer data. The less space you provide for backups the sooner older data will be discarded. [http://docs.info.apple.com/article.html?path=Mac/10.5/en/15137.html]
However, Time Machine will only delete what it considers “expired”. Within the Console Logs this process is referred to as “thinning”. It appears that many of these “expired” backups are deleted when hourly backups are consolidated into daily backups and daily backups are consolidated into weekly backups. This consolidation takes place once hourly backups reach 24 hours old and daily backups reach about 30 days old. Weekly backups will only be deleted, or ‘thinned’, once the backup drive nears full capacity.
One thing seems for sure, though; If a new incremental backup happens to be larger than what Time Machine currently considers “expired” then you will get the message “This backup is too large for the backup volume.” In other words, Time Machine believes it would have to sacrifice to much to accommodate the latest incremental backup. This is probably why Time Machine always overestimates incremental backups by 2 to 10 times the actual size of the data currently being backed up. Within the Console logs this is referred to as “padding”. This is so that backup files never actually reach the physically limits of the backup disk itself.
There appears to be a method for getting around this that may work for some. Bear in mind that it will involve deleting older backups that Time Machine does not yet consider “expired”. But it should allow you to complete the current backup attempt while at the same time preserving some of the previous backups. It is fitting, as well, to remind users that backup disks should be +at least+ twice as large as your Macs’ internal hard disk.
The Time Machine error message tells you how much space the current backup requires.
Using that measurement, go into the Time Machine Preferences and click “Options…”.
Now using the Exclusion List, begin adding things like System & Library folders, and anything else that will get the “Total Included…” figure down to the amount that Time Machine reported was necessary. Leave your User folder for last. If it is still not enough, you can begin including folder within your Home folder.
Once the “Total Included…” is below what Time Machine requires, then perform a backup. During the backup, Time Machine perform certain house-keeping duties that frees up additional space.
Once the backup is complete, check Time Machine Prefs “Available:” line. You may discover that you now have more room than expected.
Go back to the Exclusion List and begin removing items until the “Total Included…” is again just under what “Available” states.
Perform another backup. Again more room may become available. You may have to repeat this procedure several time until a backup includes ALL of your desired files.
*Backups WAY Too Large*
If an initial full backup or a subsequent incremental backup is tens or hundreds of Gigs larger than expected, check to see that all unwanted external hard disks are still excluded from Time Machine backups. Time Machine will attempt to backup any hard disk attached to your Mac, including secondary internal drives, that have not been added to Time Machines Exclusion list.
This includes the Time Machine backup drive ITSELF. Normally, Time Machine is set to exclude itself by default. But on rare occasions it can forget. When your backup begins, Time Machine mounts the backup on your desktop. (For Time Capsule users it appears as a white drive icon labeled something like “Backup of (your computer)”.) If, while it is mounted, it does not show up in the Time Machine Prefs “Do not back up” list, then Time Machine will attempt to back ITSELF up. If it is not listed while the drive is mounted, then you need to add it to the list.
*Recovering Backup Space*
If you have discovered that large unwanted files have been backed up, you can use the Time Machine “time travel” interface to recovered some of that space. Do NOT, however, delete files from a Time Machine backup disk by manually mounting the disk and dragging files to the trash. You can damage or destroy your original backups by this means.
Additionally, deleting files you no longer wish to keep on your Mac does not immediately remove such files from Time Machine backups. Once data has been removed from your Macs' hard disk it will remain in backups for some time until Time Machine determines that it has "expired". That's one of its’ benefits - it retains data you may have unintentionally deleted. But eventually that data is expunged. If, however, you need to remove backed up files immediately, do this:
Launch Time Machine from the Dock icon.
Initially, you are presented with a window labeled “Today (Now)”. This window represents the state of your Mac as it exists now. +DO NOT+ delete or make changes to files while you see “Today (Now)” at the bottom of the screen. Otherwise, you will be deleting files that exist "today" - not yesterday or last week.
Click on the window just behind “Today (Now)”. This represents the last successful backup and should display the date and time of this backup at the bottom of the screen.
Now, navigate to where the unwanted file resides. If it has been some time since you deleted the file from your Mac, you may need to go farther back in time to see the unwanted file. In that case, use the time scale on the right to choose a date prior to when you actually deleted the file from your Mac.
Highlight the file and click the Actions menu (Gear icon) from the toolbar.
Select “Delete all backups of <this file>”.
*Full Backup After Hardware Change/Replacement*
If you are running out of disk space sooner than expected it may be that Time Machine is ignoring previous backups and is trying to perform another full backup of your system? This will happen if you have replaced your computer with a new one, or had significant repair work done on your existing Mac. Time Machine will perform a new full backup. This is normal.
You have several options if Time Machine is unable to perform the new full backup:
A. Delete the old backups, and let Time Machine begin a fresh.
B. Attach another external hard disk and begin backups there, while keeping this current hard disk. After you are satisfied with the new backup set, you can later reformat the old hard disk and use it for other storage.
C. Ctrl-Click the Time Machine Dock icon and select "Browse Other Time Machine disks...". Then select the old backup set. Navigate to files/folders you don't really need backups of and go up to the Action menu ("Gear" icon) and select "Delete all backups of this file." If you delete enough useless stuff, you may be able to free up enough space for the new backup to take place. However, this method is not assured as it may not free up enough "contiguous space" for the new backup to take place.
*Outgrown Your Backup Disk?*
On the other hand, your computers drive contents may very well have outgrown the capacity of the Time Machine backup disk. It may be time to purchase a larger capacity hard drive for Time Machine backups. Alternatively, you can begin using the Time Machine Preferences exclusion list to prevent Time Machine from backing up unneeded files/folders.
Consider as well: Do you really need ALL that data on your primary hard disk? It sounds like you might need to Archive to a different hard disk anything that's is not of immediate importance. You see, Time Machine is not designed for archiving purposes, just as a backup of your local drive(s). In the event of disaster, it can get your system back to its' current state without having to reinstall everything. But if you need LONG TERM storage, then you need another drive that is removed from your normal everyday working environment.
This KB article discusses this scenario with some suggestions including Archiving the old backups and starting fresh [http://docs.info.apple.com/article.html?path=Mac/10.5/en/15137.html]
Let us know if this clarifies things.
Cheers!

Multiple iPhone backups in Time Machine

I have my wife's iPhone and she was charging it on our Mac via cable. Our iTunes is instructed not to sync automatically. We have two phones in iTunes. Child comes along and somehow resets or wipes phone: not sure which one.
My question is, if I were to enter into Time Machine is it possible to discern which backup is for which phone? The phone is not synced often and I'm guessing the last one was in September, if she even synced at all during that month .
I'm on os x10.8 which was a recent upgrade. Our previous version residing on Time Machine is SL. I have been told to be careful on the restore just in case we need to resort to other (cough) measures in order to (cough) the data.
Thanx

pcp0827 wrote:
Is there a way to delete multiple backups in TIme Machine and not have to delete old files one by one by slow one by one?
Yes, sort of. You can delete indiividual backups, or all backups of selected items,via Time Machine. See #12 in Time Machine - Frequently Asked Questions. You can only select one backup at a time, but they're deleted in a separate process, so you can select another before the first one completes. When you exit from Time Machine, you may see one or more progress bars for the individual deletions. (As noted there, never delete anything from your backups via the Finder.)
But you really shouldn't have to do that. Time Machine will delete your oldest backups automatically, when it needs room for new ones.

Delete multiple backups in time machine?

Is there a way to delete multiple backups in TIme Machine and not have to delete old files one by one by slow one by one?

pcp0827 wrote:
Is there a way to delete multiple backups in TIme Machine and not have to delete old files one by one by slow one by one?
Yes, sort of. You can delete indiividual backups, or all backups of selected items,via Time Machine. See #12 in Time Machine - Frequently Asked Questions. You can only select one backup at a time, but they're deleted in a separate process, so you can select another before the first one completes. When you exit from Time Machine, you may see one or more progress bars for the individual deletions. (As noted there, never delete anything from your backups via the Finder.)
But you really shouldn't have to do that. Time Machine will delete your oldest backups automatically, when it needs room for new ones.

After upgrading to yosmite my restore option in time machine is not avail

backups in time machine are not he disk but the store option is not avail

In the Finder, right-click or control-click the folder icon and select
Show View Options
from the contextual menu. In the dialog that opens, select None from the Arrange by menu. Close the dialog, enter Time Machine, and try again.
Another reason why items in a snapshot might not be selectable is that the time-travel view is open on a secondary display. Move it to the primary display, or if necessary, exit and disconnect the external display.

HT3275 For the past several days, I have been getting this message during backups: Time Machine could not complete the back up. The backup disk image "Volumes/Data/iMac.sparsebundle" could not be accessed (error-1).

For the past several days, I have been getting this message during backups:
Time Machine could not complete the back up. The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1). When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.' In addition, I cannot access previous backups any longer.
Help?

See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
http://pondini.org/TM/Troubleshooting.html

I'm having some difficulty with Time Machine. It appears to be deleting backups from random dates on my external hard drive. I am not deleting them. Are they hidden and how do I prevent this from happening? Can I retrieve them?

I'm having some difficulty with Time Machine. It appears to be deleting backups from random dates on my external hard drive. I am not deleting them. Are they hidden and how do I prevent this from happening? Can I retrieve them?

... I didn't know that Time Machine was more a last resort back up instead of main back up.
Don't rely upon Time Machine to the exclusion of all else. I compliment Time Machine with a periodic "clone". TM is much better than nothing, but it's a safety net, not a hammock
Here is my understanding of Time Machine's file deletion algorithm, distilled from Pondini's FAQ, Apple's KB articles, and my own observations.
Time Machine deletes ("thins") files from the backup disk as follows:
Hourly backups over 24 hours old, except the first backup of the day
Daily backups over 30 days old, except the first backup of the week
Older backups get deleted when Time Machine requires space and you deleted them from the source disk.
Therefore, assuming TM has been performing at least one backup per day, backup files will remain available:
at least thirty days, if they existed on your Mac for at least a day
until you run out of space, if they existed on your Mac for at least a week
In addition to the above, Time Machine always keeps one complete copy of your source disk so that the entire volume could be restored if necessary. Any files that remain on your source volume will be present on the TM backup, no matter how old they are.
If you are using 250 GB of space on your source disk, its Time Machine backups are likely to require at least twice that much. A good estimate of the minimum required backup volume size would be about three times the size of your source disk - 1.5 TB in your case.
A more thorough explanation would require Pondini since he has plumbed Time Machine's mysteries far more than I have.
http://support.apple.com/kb/HT1427

MAC OSX 10.5.8 and 2TB Time Machine would not back up. Saw discussion that suggested you change name without apostrophes etc. Went into Time Machine and did a manula backup without a name and it appears to be backing up now. Does this remove delete the o

MAC OSX 10.5.8 and 2TB Time Machine would not back up. Saw discussion that suggested you change name without apostrophes etc. Went into Time Machine and did a manula backup without a name and it appears to be backing up now. Does this remove delete the old backup's ?

Does this remove delete the old backup's ?
No, they are all just fine.

Past backups on time machine do not appear

Similar Messages

Maybe you are looking for