Paste text in table in a single row

Hi,
When I copy several paragraphs of text and paste it in a table, Pages automatically insert each paragraph in it's own row, adding rows as necessary. Most of the time, I don't want this and I have to merge the cells. Is there a way to paste text and have it appear in a single row, even if there is more than one paragraph?
Thank you.

It seems that you didn't do the task correctly/
What you describe is what I get when I click once on a cell.
In this case, *_only the cell is selected_*.
If I double-click the cell, the selection is no longer the cell but its contents.
In this case, when I paste, I get that :
Yvan KOENIG (VALLAURIS, France) dimanche 23 janvier 2011 21:14:04

Similar Messages

Numbers: Copy/Paste from multiple tables into 1 single Table?

I would appreciate some guidance in creating a copy/paste script from multiple numbers tables into a different single table within the same numbers document.
The columns in the source table are in different positions to the destination table.
So for example, i would want to copy…
Sheet 1, Table 1 Cell A3 copy to Sheet 2 Table Z Cell B2
Sheet 1, Table 1 Cell B3 copy to Sheet 2 Table Z Cell C2
Sheet 1, Table 1 Cell C3 copy to Sheet 2 Table Z Cell E2
Sheet 1, Table 1 Cell D3 copy to Sheet 2 Table Z Cell F2
Sheet 1, Table 1 Cell E3 copy to Sheet 2 Table Z Cell G2
Sheet 1, Table 1 Cell G3 copy to Sheet 2 Table Z Cell I2
Sheet 1, Table 1 Cell J3 copy to Sheet 2 Table Z Cell H2
and repeat the copy/paste on subsequent rows of each table until there is an empty row in Sheet 1 Table 1 (or if this is difficult, say set the repeat to a max of 30 rows).
The script would then need to move on to Sheet 1 Table 2, and do the same copying to Sheet 2 Table Z (from where the previous copy/paste finished in Table Z).
Repeat process would finalise with Sheet 1 Table 6.
The Paste part would need to be pasting values, as the cells in the source tables do contain some formulas.
At the moment this is all done manually and does take some to to undertake.
If anyone can help, i would be very grateful.
Thanks,
Colin

Interceptor,
are you trying to aggregate data from severl tables into a single table? If so you whould be able to do this without a script. The function indirect() will allow you to construct the proper formula, which you may fill over (in the same row) to the appropriate cells, then fill down.
Here is a small example:
There are three data tables ("Table 1", "Table 2", and "Table 3"). And a summary "Table Z"
In table Z make the first row a header (as shown):
Use column A to enter the Sheet name and colomn B to enter the table name.
In row 1 (the header), enter the cells you want to get
in cell C2 type (or copy and paste from here) the formula:
=INDIRECT($A2&"::"&$B2&"::"&C$1)
now select cell C2, copy now select cell C2 thru H2, paste
now select the cells C2 thu H2, hover the corsor over the bottom edge of the selection, and drag the yellow cirlc down as needed to fill the formula down.
Update the sheet and table names as needed for each row

Reporting on 2 Tables in a single row

I have two tables:
Table ItemMaster has columns item_no, description
Table Location has columns item_no, location.
The desired result is to have a single row per item showing all the locations (there are only 5 per item) on the same row .. for example:
item-a, description, location 1, location 2, location 3, location 4, location 5
item-b, description, location 1, location 2, location 3, location 4, location 5
etc.
Any ideas of how to accomplish this with a custom folder or with whatever in discoverer?
Thanks,
Kerry Brannen
P.S. The answer is probably easy and I'm only having a blind spot on this.

Kerry,
Is location a integer or varchar2?
Is there a way to distinguish between the locations. You have location 1, location 2, etc.
You might be able to use the 'max' and 'decode' statements in combination to get what your looking for or create a function retrieve the location for each column.
what I'm thinking is find the max location value for a item_no for location 1. then use the max and decode to find the next lower value for location 2 and so on and so on.
hth,
Rick

Pasting text into tables CS5

I'm working on a calendar and I want to format one mini month grid with the set sizes for the date cells and then paste the grids for all the months into duplications of this grid. However, when I paste the new month in, it resets all the sizes of the cells to match the incoming table format rather than using the format of the table I'm pasting into. As far as I've been able to tell, there is no way to set the sizes for the cells as a table or cell style. I dread having to actually edit each table separately to get them to be all the same size. I've discovered if I convert the table I'm pasting into text and then copy and past the text with paste without formatting, it works, but there isn't the option to paste without formatting if I'm pasting from one table to another, so I end up with a lot of steps. Am I missing an easier way to do this?

I just tried two versions of Word and that was the missing clue. Word X (10.4.1) doesn't work. Word 2008 (12.1) does. Appleworks, which is also an old app, doesn't work either. Looks like the problem was a tag along to upgrading from OS 10.4 >> 10.6 and CS4 >> CS5 at the same time. Why does that not surprise me?
Also just sorted out the crashing problem. Turned off OpenGL and now it seems to work fine. Not sure why it worked before, maybe brush size or the combo of dynamics I was using. At least I'm back in biz.
Thanks for your help.

Extract Multiple Rows from a Single Table into a Single Row in a New Table

I have a table in a database that contains contact data like name, address, phone number, etc.
The folks who designed the database and wrote the application wrote it so that all contact records are placed in that table, regardless of contact type. In fact, the contacts table does not even have a column for "type" even though there are many
different types of contacts present in that table.
I am trying to write a mail merge style report in SRSS, that gets sent to a specific type of contact, based on criteria provided that must be obtained from another table, and that data is then used to get back to a specific set of contacts from the contacts
table.
The attached file directly below describes my problem and all related information in an extremely detailed way.
SRSSMailMergeIssue.pdf
Unless there is a way to make a SRSS Tablix point to two different data sets in SRSS, it looks like I have to combine multiple rows from the same table into a new table.
If anyone can review the details in the attached pdf file and possibly point me in the direction I need to run to solve this probelm, I would greatly appreciate it.
I also included a document (below) that shows the tables I reference in the probelm description.
dbtables.pdf

I found a solution.... and posted it below
select
dk.ucm_docketnumber [UCM DocketNumber],
dk.ucm_docketid [UCM DocketID],
vc.FirstName [Victim FirstName],
vc.MiddleName [Victim MiddleName],
vc.LastName [Victim LastName],
vc.Suffix [Victim Suffix],
vc.Address1_Line1 [Victim AddressLine1],
vc.Address1_Line2 [Victim AddressLine2],
vc.Address1_Line3 [Victim AddressLine3],
vc.Address1_City [Victim City],
vc.Address1_StateOrProvince [Victim StateProvince],
vc.Address1_PostalCode [Victim Postalcode],
oc.FirstName [Offender FirstName],
oc.MiddleName [Offender MiddleName],
oc.LastName [Offender LastName],
oc.Suffix [Offender Suffix],
oc.Address1_Line1 [Offender AddressLine1],
oc.Address1_Line2 [Offender AddressLine2],
oc.Address1_Line3 [Offender AddressLine3],
oc.Address1_City [Offender City],
oc.Address1_StateOrProvince [Offender StateProvince],
oc.Address1_PostalCode [Offender Postalcode],
pc.FirstName [Arresting Officer FirstName],
pc.MiddleName [Arresting Officer MiddleName],
pc.LastName [Arresting Officer LastName],
pc.Address1_Line1 [Arresting Officer AddressLine1],
pc.Address1_Line2 [Arresting Officer AddressLine2],
pc.Address1_Line3 [Arresting Officer AddressLine3],
pc.Address1_City [Arresting Officer City],
pc.Address1_StateOrProvince [Arresting Officer StateProvince],
pc.Address1_PostalCode [Arresting Officer Postalcode]
FROM ucm_docket dk
left outer join ucm_victim v on dk.ucm_docketid = v.ucm_docketnumber
left outer join contact vc on vc.contactid = v.ucm_victimlookup
left outer join ucm_offender o on o.ucm_offenderid = dk.ucm_offenderlookup
left outer join contact oc on oc.contactid = o.ucm_individualid
left outer join contact pc on pc.contactid = dk.ucm_ArrestingOfficerLookup
WHERE (dk.ucm_docketnumber = @DocketNUM)

How to store array of data into a single row of table ,using any of Stmts

HI Friends,
Based on my requirements ,i have retrived a set of data from a XXX.jsp page using a request.getParameter() and stored into single dimenssional array . Now i am paassing that array to JAVA class to store a into some table .
In JSP page users can add text boxes dynamically based on his intrest then those attributes will store in table .it means table attributes are not conatant , it table attributes may change at any time when user adds any textboxs or any fields on JSP page ....thats my module ..
Now i wanted to store all array of data into Table in a single row .......thats is my requirements .
How can we use prepareStatement and Statement to store array of results intoo table row ...on each iteration i wanted to store array of results into table atributes ..It means entire array of results should to into table row at time .....coule any one write sytax ,how we do this...
could any one suggest me stps that i can impliment ......?....please reply ASAP

Well ..you code can be works for constant number of attributes in table .oopss here my requirement is table attributes not fixed ,we cant put constant number of place holder(? ) in a statement ,because those are not fixed ,
Let me explain here :
i am doing in that way only. As i mentioned you Table attributes are not constant .It may very if users add any fields dynamically on JSP page .If users have option to add any text box on Jsp page ,then that attribute will store in table as a attribute .
Now i amable fetching the all dyamic form data and stored in a Result Array below ...in this iteration all form result data are from jsp page as suggestion form ,it should stored in table in single row on corrsponding attribtes ......next time when users fills FROM ,then those data i am fetching and storing in a Result Array as below and need to store in corrsponding table attributes in a single row ....
for(int i=0;i<result.length;i++)
               System.out.println(result);
               pst3=connection.prepareStatement("insert into *emprecord* values(?)");
               if(!result[i].equals(""))
                    System.out.println(result[i]);
                         pst3.setString(1,result[i]);
                         pst3.executeUpdate();
Thnks in advance ....let me know the the way we can store dynamic form data into dyanamic table ...

How to add A single row at the middle of the table in a Webi report

Hi,
I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
Thanks in advance
Regards
Monika

Hi Monika,
It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
Can you explain in more detail what you are trying to do?
Thanks

Commiting a new row to 2 separate tables on a single jspx page

Hello all
I have 2 tables in my jspx page. Table Employees as an ADF table, and table Departments as an adf form. They are related via a view link as a * to 1 relationship so the departments view is the detail of the employee view. This means that whenever I click in the employee table on a single row, whichever Dept ID that employee has is shown in the form, automatically.
I have CreateInsert button, Delete and Commit buttons binded to the departments form, and another CreateInsert Delete and Commit binded to the Employees table. When I run the page in AppMod everything works fine and I can add a new row to the table Employees. However when I try to add a row into Departments the AppMod gives me this error message.
Jun 15, 2010 1:46:58 PM oracle.jbo.jbotester.MainFrame main
INFO: BC4J Tester started.
Exception in thread "AWT-EventQueue-0" oracle.jbo.TooManyObjectsException: JBO-25013: Too many objects match the primary key oracle.jbo.Key[1 ].
at oracle.jbo.server.EntityCache.throwTooManyObjectsException(EntityCache.java:505)
at oracle.jbo.server.EntityCache.handleDuplicateKey(EntityCache.java:513)
at oracle.jbo.server.EntityCache.addForAltKey(EntityCache.java:870)
at oracle.jbo.server.EntityCache.add(EntityCache.java:474)
at oracle.jbo.server.EntityImpl.callCreate(EntityImpl.java:955)
at oracle.jbo.server.ViewRowStorage.create(ViewRowStorage.java:1143)
at oracle.jbo.server.ViewRowImpl.create(ViewRowImpl.java:428)
at oracle.jbo.server.ViewRowImpl.callCreate(ViewRowImpl.java:445)
at oracle.jbo.server.ViewObjectImpl.createInstance(ViewObjectImpl.java:4915)
at oracle.jbo.server.QueryCollection.createRowWithEntities(QueryCollection.java:1843)
at oracle.jbo.server.ViewRowSetImpl.createRowWithEntities(ViewRowSetImpl.java:2368)
at oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:2409)
at oracle.jbo.server.ViewRowSetImpl.createAndInitRow(ViewRowSetImpl.java:2374)
at oracle.jbo.server.ViewObjectImpl.createAndInitRow(ViewObjectImpl.java:9684)
at oracle.jbo.jbotester.NavigationBar.doInsertAction(NavigationBar.java:136)
at oracle.jbo.jbotester.NavigationBar.doAction(NavigationBar.java:109)
at oracle.jbo.uicli.controls.JUNavigationBar$NavButton.actionPerformed(JUNavigationBar.java:117)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
at java.awt.Component.processMouseEvent(Component.java:6263)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6028)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4630)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2475)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Jun 15, 2010 1:47:08 PM oracle.jbo.jbotester.MainFrame exit
INFO: BC4J Tester exit code(0)
Process exited with exit code 0.
I realize this message means I have duplicate primary key rows but I do not understand why as they are seperate tables.
So I turn to you, Oracle Oracles, for wisdom and guidance

Well, you cannot do that in the detail->master way you are describing. It's easy to understand why you get the error:
1). You have a detail->master link.
2). When you click "new" to create a new department, you are doing so in the context of the link, which means that the department ID for the new record is created in the context of the currently selected employee.
3). You now have 2 departments with the same primary key
4). JBO-25013
There are only 2 ways that I can think of to do this:
1). Use a master->detail instead of a detail->master (I know this isn't how you want to do it, but...)
2). In your original page, use a single VO that combines both employees and departments. When you click "new department" in the context of an employee, update the selected employee with the key of the new department.
John

Interactive Report's Column Definition - Single Row View Label Bug?

Hello,
I have an Interactive report that I've added a Blue background to certain column headings (done by giving Column Heading a background color), this works fine except for the Single Row view - it displays the <....> code I used to get the background color and the column heading. I've tried to change the Single Row View Label by unchecking the 'Use Same Text for Single Row View' on the Column Definition and giving a different label, it just ignores whatever I put in and shows the Column Heading with the < .... > code. Is this a Bug or am I doing something wrong?
Thanks,
Anna

Hi Anna,
I believe that it is a bug.
If the 'Use Same Text for Single Row View' checkbox is unticked and some text is entered in the 'Single Row View Label' field it gets ignored completely when viewed in the single row view and the existing value in 'Column Heading' is used.
I wanted to do something similar to you, colouring some of the Interactive Report column headers, and it works fine in the IR report itself but shows the code (span style:color etc) in the single row query. I am using Apex 3.1.1 and the Sand Theme.
I created a simple application on apex.oracle.com using the red theme and in single row view it still ignores the 'Single Row View Label' but interestingly shows the Column Heading text without the code. This indicates that there could be a work-around by altering the theme.
Regards,
Chris

Can't paste text anymore from Acrobat Pro to Indesign CS3

Since upgrading to Acrobat Pro, I can't copy and paste text into Indesign CS3 or 4 which is included in pdfs as NOTES. I can, however, copy and paste the regular content in the Acrobat document. After I copy the text from the notes, I go to paste it into Indesign and all I get is a blinking cursor. I can copy and paste from Acrobat 7. Any suggestions would be greatly appreciated.

I've seen no solutions to this issue thus far. I will post my solutions to this issue here and on the other thread I found with the same problem.
Here's how I resolved the issue. In InDesign under Preferences go to:
Clipboard Handling>"When Pasting Text and Tables from Other Applications"/Paste: (and choose the "all information" option)
If you have the "Text Only" option selected, this might be the issue. After checking "All Information" my issue was resolved.

List of all dba_users in a single row irrespective of the oracle version

Hi guys,
My question is to display all the usernames in dba_users table in a single row seperated by commas using an sql query irrespective of the database version. Is this possible?
Thanks in advance
atleast in 9i or 10g or 11
Edited by: user13274185 on Jun 9, 2010 3:45 AM
thanks a lot user12097713 but displaying only names starting with A...
Edited by: user13274185 on Jun 9, 2010 3:52 AM

SELECT LTRIM(MAX(SYS_CONNECT_BY_PATH(USERNAME,',')),',') FROM
SELECT USERNAME,RANK() OVER(ORDER BY USERNAME) SEQ FROM DBA_USERS
start with seq=1 connect by PRIOR SEQ+1=SEQ
Try this . Hope it will work for you.

How can I take text from a webpage that is in multiple rows and move it into a single row in Excel?

I need help figuring out how to take data from internet pages and enter it into one single row in an excel, or numbers if that is the easier way to go. I was also told access might be good to use. Basically I am going to chamber of commerce page and wanting to extract the member listing and enter in a database in a single line. The data is in different numbers of lines as you will see below (info edited to take out personal info). So I want to take the name of business, business owner, address, city, state, zip, and phone and put it into one line on a spreadsheet. I want to do this many times over. I think there is a way to do it through apple script and automator, but I have not been successful after 2 weeks of trying and searching. I have over 800 listings and I surely don't want to go through and do them one at a time. Any suggestions?
Data from website:
Westrock Coffee
Mr.
Collins Industrial Place
North Little Rock, AR 72113
Phone:
Send Email
Member Since: 2011
Sweet Creations by DJ
Ms. J
allace Bridge Road
Perryville, AR 72126
Phone:
Fax:
Send Email
Member Since: 2013
See Also Woman Owned and/or CEO
Premium Refreshment Service
Mr. E
est Bethany Road
North , AR 72117
I want it to look like this
Company name, owner name, address, city, state, zip, phone
How can I get the extra data out of the way and remove the format so that it will go into excel? Thanks for any help you can provide. I am not to savvy with code, but I got a friend who is an IT guy that can help. Thanks again

So, basically, create 800 individual entries, each one containing everything from business name through the phone (not fax) number, add some commas and spaces to entries, and then put each entry on a separate line?
1. Go to website page such as this one-- http://www.littlerockchamber.com/CWT/External/WCPages/WCDirectory/Directory.aspx ?ACTION=newmembers --which seems formatwise very close to what you're trying to scrape.
2. Cmd-A to select all. Cmd-C to copy it to clipboard.
3. Open freeware TextWrangler. Cmd-V to paste info from clipboard into a blank TW document.
4. Remove lines from top and bottom so that only membership list remains.
5. Process lines to remove everything from "Fax" line through "See Also" line. Only business name through phone number will remain in the file.
--A. TW > Text > Process Lines containing . . .
-----(check "Delete matched lines"; uncheck all others)
-----Enter "Send Email" in the search box.
-----Click Process.
--B. Repeat 5A for other lines to be removed
------Member Since
------See Also
------Fax
6. Insert markers to separate entries:
TW: Search > Find . . .
------(check "Wrap around" and "Grep")
------in Find box: \r\r\r\r
------in replace box: \r***
------Click Replace All
7. Remove remaining blank lines:
TW: Search > Find . . .
------(check "Wrap around" and "Grep")
------in Find box: \r\r
------in replace box: \r
------Click Replace All
8. Add comma and space at end of each line:
TW: Search > Find . . .
------(check "Wrap around" and "Grep")
------in Find box: $
------in replace box: , (comma space)
------Click Replace All
9. Remove all returns:
TW: Search > Find . . .
------(check "Wrap around" and "Grep")
------in Find box: \r
------in replace box: (leave blank)
------Click Replace All
10. Insert returns in place of markers:
TW: Search > Find . . .
------(check "Wrap around" and "Grep")
------in Find box: \*\*\*, (backslash asterisk backslash asterisk backslash asterisk comma space)
------in replace box: \r
------Click Replace All
11. Remove trailing comma and blank on each line:
TW: Search > Find . . .
------(check "Wrap around" and "Grep")
------in Find box: , $ (comma space dollar sign)
------in replace box: (leave blank)
------Click Replace All
Import this text file into Excel or Numbers.

Merging of multiple rows in an internal table as a single record

Hi All,
I have an internal table which has the following columns:
text, date, time, user.
it stores notes in the internal table.
The problem is...when I save a note with multiple lines and spaces it saves each line of the note as a row in the internal table.
Thus i get more no. of rows in the internal table compare to the no. of rows!
I need to store each notes as single row in the internal table.
Please advise how to approach this?
Helpful answers will be rewarded.
Thanks & Regards,
Anshumita.

You can create a deep internal table. You can declare one Column as an internal table and store the NOTES in that Internal table for each row.
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb366d358411d1829f0000e829fbfe/content.htm
you can check the example in the link
regards,
abhishek

Download to excel - long text in single row using gui_download

Hi Experts,
I want to download the long text (read_text) (500-600 characters) to excel in single row. the column width should be 60.
i am using the gui_download FM as in my report i m using one gui_download for header data and 2nd one for details using APPEND . Can u suggest me the solutions for the same. Can i use word wrap option and if yes , then how to use it?
For eg.
Customer Satisfaction
There are no escalations / adverse feedback from the customer
Customer uses him/her for benchmarking others
Regular status update to customer
Proactively understands future needs of customer
Increases customer's confidence so that there is an increase in quality / quantity of work
This whole text should appear as single row.
Thanks,
Edited by: Khushi p on Nov 12, 2010 10:44 AM

I tried alot to put this in a legible format by usingcode...code but still it is not putting the code in a correct format.May be some mentor will put it in a good format so that you can understand.Below is a wraper progrm which meets your objective.
REPORT ZSCRATCHPAD.
TABLES:EKPO.
TYPE-POOLS:slis.
TYPES : BEGIN OF ty_ekpo,
         ebeln TYPE ekko-ebeln,
         ebelp TYPE ekpo-ebelp,
         txz01 TYPE ekpo-txz01,
         matnr TYPE ekpo-matnr,
         werks TYPE ekpo-werks,
         loekz TYPE ekpo-loekz,
         oic_ptrip TYPE ekpo-oic_ptrip,
         menge TYPE ekpo-menge,
         meins TYPE ekpo-meins,
         umrez TYPE ekpo-umrez,
         umren TYPE ekpo-umren,
         text TYPE string,
        END OF ty_ekpo.
TYPES : BEGIN OF ty_text ,
        tdformat TYPE tline-tdformat,
        tdline TYPE tline-tdline,
        END OF ty_text.
data: g_t_ekpo TYPE STANDARD TABLE OF ty_ekpo WITH HEADER LINE,
       g_repid TYPE sy-repid,
       g_ebeln(15),
       l_fieldname1 LIKE ibipparms-path,
       l_fieldname2 TYPE string,
       g_objectid LIKE cdhdr-objectid,
       g_t_text TYPE STANDARD TABLE OF ty_text WITH HEADER LINE,
       g_t_text1 TYPE STANDARD TABLE OF ty_text WITH HEADER LINE.
data:g_fieldcat type slis_t_fieldcat_alv with header line,
     g_events type slis_t_event,
     wa_events like line of g_events,
     g_listheader type slis_t_listheader,
     walistheader like line of g_listheader,
     g_layout type slis_layout_alv,
     g_top type slis_formname,
     g_sort type slis_t_sortinfo_alv with header line,
     g_sort1 type slis_sortinfo_alv,
     g_printparams type slis_print_alv,
     g_variant type disvariant,
     g_title type lvc_title,
     g_excluding type slis_t_extab,
     g_grid TYPE REF TO cl_gui_alv_grid.
field-symbols: <fs> type lvc_title.
SELECT-OPTIONS:P_EBELN FOR EKPO-EBELN NO INTERVALS.
PARAMETERS:p_r1 radiobutton group grp1,
           p_r2 radiobutton group grp1.
SELECT ebeln
       ebelp
       txz01
       matnr
       werks
       loekz
       oic_ptrip
       menge
       meins
       umrez
       umren
       INTO TABLE g_t_ekpo
       FROM ekpo
       WHERE ebeln IN p_ebeln
       AND loekz NE 'L'.
IF sy-subrc <> 0.
CLEAR g_t_ekpo.
ENDIF.
define m_fieldcat.
g_fieldcat-fieldname = &1.
g_fieldcat-col_pos = &2.
g_fieldcat-seltext_l = &3.
g_fieldcat-do_sum = &4.
g_fieldcat-outputlen = &5.
g_fieldcat-checkbox = &6.
append g_fieldcat to g_fieldcat.
clear g_fieldcat.
end-of-definition.
if p_r1 = 'X'.
PERFORM summary_display.
else.
perform download.
endif.
FORM summary_display .
concatenate 'Test' ' ' into g_title separated by space.
assign g_title to <fs>.
g_repid = sy-repid.
m_fieldcat 'EBELN'     '' 'EBELN'     '' 10   ''.
m_fieldcat 'EBELP'     '' 'EBELP'     '' 05   ''.
m_fieldcat 'TXZ01'     '' 'TXZ01'     '' 40   ''.
m_fieldcat 'MATNR'     '' 'MATNR'     '' 10   ''.
m_fieldcat 'WERKS'     '' 'WERKS'     '' 04   ''.
m_fieldcat 'LOEKZ'     '' 'LOEKZ'     '' 01   ''.
m_fieldcat 'OIC_PTRIP' '' 'OIC_PTRIP' '' 16   ''.
m_fieldcat 'MENGE'     '' 'MENGE'     '' 13   ''.
m_fieldcat 'MEINS'     '' 'MEINS'     '' 03   ''.
m_fieldcat 'UMREZ'     '' 'UMREZ'     '' 05   ''.
m_fieldcat 'UMREN'     '' 'UMREN'     '' 05   ''.
g_layout-zebra = 'X'.
g_layout-colwidth_optimize = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_callback_program       = g_repid
*     i_callback_pf_status_set = 'SET_PF_STATUS'
      is_layout                = g_layout
      i_callback_user_command = 'LIST1'
      i_grid_title             = <fs>
*     i_callback_top_of_page   = ' '
      it_fieldcat              = g_fieldcat[]
*     it_excluding             = g_excluding
      i_save                   = 'A'
*     is_variant               = ITVARIANT
      it_events                = g_events[]
*     is_print                 = ITPRINTPARAMS
*     it_sort                  = itsort[]
    tables
      t_outtab                 = g_t_EKPO[]
      exceptions
      program_error           = 1
      others                  = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear:g_fieldcat.
refresh:g_fieldcat.
ENDFORM.                    " summary_display
form list1 using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
case r_ucomm.
    when '&IC1'.
      REFRESH g_t_text.
      if rs_selfield-fieldname = 'EBELN'.
        READ TABLE g_t_ekpo INDEX rs_selfield-tabindex.
        CONCATENATE g_t_ekpo-ebeln g_t_ekpo-ebelp INTO g_ebeln. "CRQ94538-Capture text
        SHIFT g_ebeln LEFT DELETING LEADING space.
        PERFORM read_text USING g_ebeln g_t_text[].
        IF g_t_text[] IS NOT INITIAL.
          PERFORM pop_up_with_table .
        ENDIF.
      endif.
    when 'OTHERS'.
      leave to screen 0.
endcase.
endform.                                                    "list1
FORM read_text USING    p_ebeln   p_t_itab LIKE g_t_text1[].
PERFORM fill_readtext USING p_ebeln 'EKPO' 'F01' p_t_itab.
ENDFORM.                    " f0008_read_text
FORM fill_readtext USING    p_vbeln
                             p_object
                             p_textid
                             pt_itab LIKE g_t_text[] .
DATA: ls_itab LIKE LINE OF g_t_text,
        l_header LIKE thead,
        l_tdname LIKE thead-tdname.
CLEAR pt_itab.
REFRESH pt_itab.
MOVE p_vbeln TO l_tdname.
CALL FUNCTION 'READ_TEXT'
    EXPORTING
      client                  = sy-mandt
      id                      = p_textid
      language                = sy-langu
      name                    = l_tdname
      object                  = p_object
    IMPORTING
      header                  = l_header
    TABLES
      lines                   = pt_itab
    EXCEPTIONS
      id                      = 1
      language                = 2
      name                    = 3
      not_found               = 4
      object                  = 5
      reference_check         = 6
      wrong_access_to_archive = 7
      OTHERS                  = 8.
endform.                    "fill_readtext
FORM pop_up_with_table .
CALL FUNCTION 'POPUP_WITH_TABLE'
    EXPORTING
      endpos_col   = 82
      endpos_row   = 20
      startpos_col = 10
      startpos_row = 10
      titletext    = ' '
    TABLES
      valuetab     = g_t_text
    EXCEPTIONS
      break_off    = 1
      OTHERS       = 2.
IF sy-subrc NE 0.
    CLEAR g_t_text.
ENDIF.
ENDFORM.                    " f4000_pop_up_with_table
FORM download .
if g_t_ekpo[] is not initial.
    loop at g_t_ekpo.
*      concatenate text-001 g_t_ekpo-matnr into g_t_ekpo-matnr.
      PERFORM convert_table_to_string.
      modify g_t_ekpo.
      clear g_t_ekpo.
    endloop.
endif.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = 'C:/KKVT/TEST.XLS'
      filetype                = 'ASC'
      write_field_separator   = 'X'
    TABLES
      data_tab                = g_t_ekpo
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
message: 'file downloaded' type 'S'.
ENDIF.
ENDFORM.                    " download
FORM convert_table_to_string .
DATA: str TYPE string,
        len TYPE i,
        tot_len TYPE i.
FIELD-SYMBOLS <fs1> TYPE ANY.
IF g_t_ekpo-ebeln IS NOT INITIAL.
    CONCATENATE g_t_ekpo-ebeln g_t_ekpo-ebelp INTO g_ebeln. "CRQ94538-Capture text
    SHIFT g_ebeln LEFT DELETING LEADING space.
    PERFORM read_text USING g_ebeln g_t_text[].
    IF g_t_text[] IS NOT INITIAL.
      CLEAR: len,
             tot_len,
              str.
      DO.
        ASSIGN COMPONENT sy-index OF STRUCTURE g_t_text TO <fs1>.
        IF sy-subrc NE 0.
          EXIT.
        ENDIF.
        DESCRIBE FIELD <fs1> LENGTH len IN CHARACTER MODE.
        ADD len TO tot_len.
      ENDDO.
      CALL FUNCTION 'CONVERT_TABLE_TO_STRING'
        EXPORTING
          i_tabline_length = tot_len
        IMPORTING
          e_string         = str
        TABLES
          it_table         = g_t_text[].
      IF sy-subrc = 0.
        g_t_ekpo-text = str.
      ENDIF.
    ELSE.
      CLEAR: g_t_ekpo-text,
             tot_len,
             len,
             str.     .
    ENDIF.
ENDIF.
ENDFORM.                    " convert_table_to_string
Edited by: Kiran K on Nov 18, 2010 5:21 AM

How to display multiple lines of texts in a single rows in ALV

Hi,
I have a unique requirement in which i have to display multiple lines if texts for a single rows in ALV Grid. Right now in my output it is coming in single line which is not visible fully because that text is more than 255 character. So i want to display the test by splitting into multiple lines and show it on output. Please suggest some solution for this if this is possible in ALV.
Thanks,
Raghav

Hi Raghavendra,
Its not possible to display multiple line in one row of an alv, but i think you can acheive it by splitting the whole text into multiple sub-text.
For example, if your requirement is as below:
Field #1          Field #2
1                    xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx(200 characters)
2                    yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy(220 character)
then you can break Field#2 value into say 50 character and then populate the internal table with repetative entries of Field#1 and the finally sort it by Field#1 value... as a result of which you output will be somewhat as below:
Field#1          Field#2
1                   xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
                     xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
                     xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
                     xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2                   yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
                     yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
                     yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
                     yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
                     yyyyyyyyyyyyyyyyyyyy
Hope it will help you in meeting your requirement.
Regards,
Shradha

Paste text in table in a single row

Similar Messages

Maybe you are looking for