Patch set 3 - 10g R2

I am wondering if anyone else has had the same problem. I have downloaded on two separate occasions patch 3 (p6810189_10204_Win32.zip) for 10g R2. When I extract the files from the zip file all I get is the readme.html even though the .zip is ~ 1GB.
Thanks in advance,
Steven.

I have a copy of that. No issues. Using the 'properties' of the file on NTFS, I report
size: 986 MB (1,034,079,272 bytes)
size on disk: 986 MB (1,034,080,256 bytes)
And using md5deep.exe (http://md5deep.sourceforge.net/) I report an md5 checksum of 38a59d4a3b902a399119c3ac45f81a41
By the way
- if there is a problem, you might want to report it to Metalink 'cause it's their worry
- I've seen this kind of problem due to transmission errors from either end
- it would have been kind to mention that the product is database - Oracle has several other products that have patch sets

Similar Messages

Error while appying patch set 4 (10.1.3.4.0) to oracle home (10.1.3.1.0 )

Hi,
I am trying to apply patch set 10g Release 3 (10.1.3) Patch Set 4 (10.1.3.4.0) to 10g Release 3 (10.1.3.1.0) oracle home. As the pre - installation steps describes I have run the script ‘upgrade_10131_10134_oracle.sql’ for both ESB and BPEL. Also we need to delete the line <data id="java-bin" value="/myhost/jdk1.4.2/bin/java" />from the ‘ORACLE_HOME/opmn/conf/opmn.xml’ file. But when I have checked that file, the line was not present there.
But when I am running the installer, it is showing error like
Error
--> Process (index=1,uid=418288051,pid=30220)
failed to start a managed process after the maximum retry limit
Log:
C:\Oracle\Soa_OFMPractice\SOATESTING\opmn\logs\\HTTP_Server~1.log
Configuration assistant "OPMN Configuration Assistant" failed.
When I checked the log I got the error message like
08/12/05 14:00:10 Start process
Syntax error on line 278 of c:/oracle/soa_ofmpractice/soatesting/apache/apache/conf/httpd.conf:
Cannot load c:/oracle/soa_ofmpractice/soatesting/apache/apache/modules/apachemoduleossl.dll into server: (127) The specified procedure could not be found:
Does anybody know how to fix this problem?
Thanks & Regards,
Anju

There is a quick fix for this
There are 2 lines you need to comment form the c:/oracle/soa_ofmpractice/soatesting/apache/apache/conf/httpd.conf
A comment is done with a #
If you look in the C:\Oracle\Soa_OFMPractice\SOATESTING\opmn\logs\HTTP_Server~1.log file it will tell you.
Find the line that has apachemoduleossl in it. When you try and restart it will fail again the C:\Oracle\Soa_OFMPractice\SOATESTING\opmn\logs\HTTP_Server~1.log should tell you what line to comment
sorry can't be of much more help but dont have access to an environement at the moment.
cheers
James

Oracle Application Server 10g R3 with patch set 10.1.3.5.0

Hi All,
Can anyone help me on this, When I install Oracle Application Server 10g Release 3 (10.1.3.1.0) and patch set 10.1.3.5.0 on Linux. I am not able to find forms and reports container.
This version doesn't support forms and reports or I have go OAS 10g R2 (10.1.2.0.2) with patch set 3 (10.1.2.3.0). What is the difference between these two releases.
Please help me.
Regards,

Hi James,
1)Yes it supports IE 8 .Please review the below link for certification details on browers :-
    http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BAJGCBEA
     Note: Oracle Application Server supports only those browsers.
2)Forms only support Windows 7 32 bit only.
    Please refer to the note:1292919.1 "Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)"
3)Could you provide more information of JVM because when you install 10gR2 it has JDK and JRE present in it.
Regards,
Prakash.

10g Release 2 (10.2.0.4) Patch Set 3 for HP-UX Itanium installation failed

hi everyone
after i installed the oracle10g 10.2.0.1,and tried to install the patch set (10.2.0.4)
Prerequisite check failed!
My OS platform is HP-UX B.11.23 IA64
the error info as follow :
Checking the Components installed in Oracle Home
Actual Result: error
Check complete. The overall result of this check is: Not executed <<<<
Recommendation:
=======================================================================
Checking for Oracle Home incompatibilities ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-15038: Unable to execute rule 'CheckCompatibility' from ruleset 'CompatibilityChecks'. The underlying test 'oracle.sysman.oip.oipc.oipcz.OipczCompatibilityChecks.checkProductCompatibility' has thrown an unhandled exception [value for param now is null]. If the exception results in a failure of the test and the exception needs to be propagated, then encapsulate the exception in the result object and return the result.
Recommendation: Choose an existing Oracle Database 10g Oracle Home for installing this software.
=======================================================================
Any advise will be much appriciated!
Do need your helps!
Thanks&Regards
Peter

Hello,
The same problem is documented on Oracle metalink:
OUI 10.2 Prerequisite Check Fails With OUI-15038 And "[value for param now is null]" [ID 602059.1]:
Cause
Some kernel tunables (parameters) have been changed but the new values will not be activated until the next server reboot
Solution
Reboot the server so that the kernel tunable (parameter) changes are activated before installing the Oracle software
Workaround
The errors/warnings can be ignored and the Oracle installation can be completed successfully, but it is best to schedule a reboot of the server soon so that the pending kernel parameter changes are activated.
References
BUG:7150277 - OUI 10.2 PREREQ CHECKS FAIL WITH OUI-15038 AND "[VALUE FOR PARAM NOW IS NULL]"

Oracle 10g 2 - 10.2.0.2 Patch seti without instance

Hi,
I'm installing Oracle 10g 2 - 10.2.0.2.
I installed base release 10g 2 and then i have installed the patch set 10.2.0.2 (Linux x86).
It's a new installation, so there isn't an instance.
When i use dbca to create the DB i receive the error
ORA-01092: ORACLE instance terminated. Disconnection forced.
So i think i should execute catupgrd.sql like described in readme of patch, but if there ins't an instance, how could i connect to the db as sysdba?
Thanks!

If you don't currently have any database, then you don't need to run the catupgrade script, this is meant only for databases so the data dictionary is upgraded on an individual basis. Just ensure you have properly applied the patchset against the right Oracle Home and ensure your environment variables are properly set.
~ Madrid

Oracle 10g release 2 patch set 3

Oracle 10g release 2 patch set 3 is for 10.2.0.4. Can this patch be applied to Oracle enterprise 10.2.0.3? Thanks.

Oracle 10g release 2 patch set 3 is for 10.2.0.4. Can
this patch be applied to Oracle enterprise 10.2.0.3?
Thanks.Always read the README to verify.
In general a patchset can be applied to the base and any lower patchset.
So 10.2.0.4 should, unless warned otherwise for your specific configuration, be applicable to any of 10.2.0.1, 10.2.0.2 and 10.2.0.3

10g Release 2 (10.2.0.4) Patch Set 3 for Linux x86 is available

For all those who were in need of some bug fixing, maybe it has been patched in 10g Release 2 (10.2.0.4) Patch Set 3 for Linux x86, which is now available for download.

Hello Srini, thanks for your answer.
I haven´t Oracle Dataguard, I have a disk replication with other supplier, for this reason, I need to know the files that will be modified, because if the patch modifies a file that I haven´t on replication, I will have problems.
Thanks again.

Cpio syntax in 10g Release 1 (10.1.0.3) Patch Set 1 for AIX-Based Systems

OracleÂ® Database Patch Set Notes
10g Release 1 (10.1.0.3) Patch Set 1 for AIX-Based Systems
Download and Extract the Installation Software
To download and extract the patch set installation software:
1. Download the p3761843_10103_AIX64-5L.zip patch set installation archive to a directory that is not the Oracle home directory or under the Oracle home directory.
2. Enter the following commands to unzip and extract the installation files:
$ unzip p3761843_10103_AIX64-5L.zip
$ cpio âidcv p3761843_10103_AIX64-5L.cpio
Of course cpio -i is expecting a standard input, so there a missing <
cpio âidcv < p3761843_10103_AIX64-5L.cpio
Best Regards
Laurent Schneider

Hi Laurent,
Apologies for the delay responding to your feedback.
The Document to which you refer does not appear to be listed on the pages my group maintains at: http://www.oracle.com/technology/documentation/index.html
We are not actually part of the OTN group.
Therefore, please try the Members Feedback forum instead at: Community Feedback (No Product Questions)
Thanks and regards,
Les

Patch set from 10g Enterprise Edition Release 10.2.0.1.0 to 10.2.0.3.0

Hi,
Can you please provide me the patch set to upgrade from
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production for Windows 32bit
to
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production for Windows 32bit
and instruction to apply the patch.
Thank you.
Regards,
Lokanath

For this you need to have CSI number and account on https://support.oracle.com
https://support.oracle.com/CSP/ui/flash.html#tab=PatchHomePage(page=PatchHomePage&id=()),(page=PatchSearchResultsHome&id=(search=%3CSearch%3E%0A%20%20%3CFilter%20name=%22patch_number%22%20op=%22IS%22%20value=%225337014%22%20type=%22patch_number%22/%3E%0A%20%20%3CFilter%20name=%22platform%22%20op=%22IS%22%20value=%22319,212%22%20type=%22platform%22/%3E%0A%3C/Search%3E&from=bookmark&viewItem=0&flag=search))
Regards
Rajesh

URGENT- Apply OracleAS 10g Release 3 (10.1.3.0) Patch Set 5 (10.1.3.5.0)

Hi friend;
I had one urgent issue. I am following Upgrading to the Latest OracleAS 10g 10.1.3.x Patch Set in Oracle E-Business Suite Release 12 [ID 454811.1]
I had one issue and i restart to installation but on OUI screen i have,
There are no patches that need to applied from the patchsert Oracle application Server Patchset 10.1.3.5
I dont have oraInventory and i followed :
How to Create a Clean oraInventory in Release 12 [ID 834894.1]
My oraInventory which i created its shows:
inventory_loc=/etc/oraInventory
inst_group=dba
Any one has idea?
Regard
Helios
Edited by: Helios- Gunes EROL on Jul 13, 2010 5:57 PM

You say you have 10.1.3.0 and your message says "There are no patches that need to applied from the patchset Oracle application Server Patchset *10.2.3.5*"
You can't patch 10.1.2 with a 10.1.3.
are you sure you have the appropriated patch?

10g Release 2 Patch Set 1 for windows 2003 32bit

Hi. I am having hard time finding the *10.2.0.3 Patch Set 1* for 10g R2 for Win2003 32 bit on metalink. I found Patch set 2 which is 5337014all right but no Patch Set 1.
Does anyone know the Metalink patch number for Patch Set 1 so I could do a quick search?
Thanks!!!
Edited by: avtandil on Oct 16, 2008 9:00 AM

only thing I found...but it is not a PATCH SET
Patch 5731535
Description ORACLE 10G 10.2.0.3 PLACE HOLDER BUG FOR PATCH 1 ON WINDOWS 32 BIT
Last Updated 19-FEB-2007
Edited by: ualual on Oct 16, 2008 1:48 PM

Which OracleAS 10g patch set I am using?

HI,
I want to upgrade the EBS r12 (12.0.6) with RDBMS 11g.
I am following the Doc ID: 752619.1. (Upgrade OracleAS 10g Release 3 (10.1.3) to Patchset 4 (10.1.3.4) (Required))
How I can check Which Patch Set level of OracleAS 10g I am using????
thx

How I can check Which Patch Set level of OracleAS 10g I am using????Hi,
Please refer the note:468311.1- Script to find Apache, Java, JRE, Forms version for Oracle E-Business Suite R12.
Also you can check the current patchset version by check the installed components while running the ./runinstaller
-Rk

Is forms 10g Patch set 3 (10.1.2.3) released?

Hi All,
I checked metalink for information regarding Patch set 3 (10.1.2.3) and could see none.
Is this released yet?
Thanks
Rajesh ALex

Regarding the size:
There are almost 1200 fixes in the code line and this means that a lot of the code is being touched by fixes, making the patch set large. Since we don't patch individual components any longer we have this situation. It would be good to have a smaller footprint but in the mean time I recommend a download manager to handle the case of an interrupted download.<br>
I tried a download manager the other day called Free Download Manager. It worked really well and it is free as the name implies. I pulled out the network cable to simulate a break and it happily continued from where it left off when the network went down. Until Oracle does what Sun does: incorporate a download manager into the downloads this is a good solution to the problem of interrupted downloads that you have to start from the beginning with.

Files modified by 10g Release 2 (10.2.0.4) Patch Set 3 for HP-UX Itanium

Hello, anyone knows what are the files modified by 10.2.0.4.0 Patch Set 3? or where can I found this information?
Thanks in advanced.

Hello Srini, thanks for your answer.
I haven´t Oracle Dataguard, I have a disk replication with other supplier, for this reason, I need to know the files that will be modified, because if the patch modifies a file that I haven´t on replication, I will have problems.
Thanks again.

Patch 6867054 to 6810189 (10g Release 2 (10.2.0.4) Patch Set 3 )

I'd like to go from 6867054 to 6810189 on Windows 32 bit machine. Can I just run the 6810189 setup.exe OR are there any intermediate patches to install.
Opatch lsinventory is showing this:
Interim patches (1) :
Patch 6867054 : applied on Fri May 02 11:00:16 EDT 2008
Created on 14 Apr 2008, 10 02 56 hrs
Bugs fixed:
Thanks.

Hi.
As I understand you want to upgrade to the patch set 3, in other words to 10.2.0.4.
yes, you can use setup.exe for this. This patch set could be installed on any release starting from 10.2.0.1, regardless of the previous patch set, or interim patch's installed.
I would recommend to read patch set installation instructions carefully, you can find all the information on read notes there.
Make sure you backed up your current oracle home, oracle inventory and oracle database directories(i.e. datafiles).
Patch sets and interim patches are cumulative, they themselves manages previously installed patch sets or interim patches. but patch bundles are specific for base patch sets.

Do I need a patch set?

I am working to install OAM 10.1.4.0.1 to accomplish an IIS SSO integration. I have installed the 10.1.4.0.1 Idendity Server and WebPass on a windows install of OID. Looks like I now need to install Policy Manager and Access Server as well. Finally I will be able to install and configure the IIS WebGate to get SSO functionality. It is my impression I need the 10.1.4.2.0 patch set for this to all work. I am looking at the download page and see the "Oracle Adaptive Access Manager 10g (10.1.4.2.0)" and the "Oracle Virtual Directory 10.1.4.2 Patchset". I do not see an OIS 10.1.4.2 patchset. Can someone please provide some guidance on this.
Thanks,
John

IIS SSO will work on OAM 10.1.4.0.1.
10.1.4.2.0. is a full patch set that you can apply to all components. Many folks are running 10.1.4.0.1 in production today.
You don't need to touch OVD or OAAM based on your stated goal.
Mark

Patch set 3 - 10g R2

Similar Messages

Maybe you are looking for