Payables Employee Listing Report Doesn't Reflect End-Date

We are running apps 11.0.3 on HP-UX 11, 8.0.5 database. When we run the Employee Listing in AP, the employees we have end-dated continue to show up when we run the report for only 'Active' employees. We don't have HR installed, so I don't know where else to end-date the employees (other than the employees screens in AP) so they won't show up on this report.
Any ideas?

In the "Enter Employees" screen within Payables, current practice is to end-date an employee when they are terminated in the Employment Dates field (there is a from and to field; the from is populated with the sysdate as employees are added). If you click "More" and go to the Person Information form, you can also From-To date the address detail. I tried end-dating this, but it didn't show up on the report either.
As mentioned before, we don't have HR installed (maybe a partial but there was no activity there) so Payables is the only place we maintain employees.

Similar Messages

Report execution start and end date/time

Hi All,
How can one find execution start and end date/times for all reports? Basically I am looking to see what reports were run on a day, when and how long it took for each to complete.
Thank you.
Denis

Hi,
The "eul5_batch_reports" holds the data about the scheduled report and if you don't have any so you will not have any data.
Take a look at "EUL5_QPP_STATS"
for example:
select
qpp.qs_doc_name,
qpp.qs_doc_details,
fu.user_name Ran_by,
qpp.qs_created_date Start_run,
qpp.qs_doc_owner Doc_owner,
qpp.qs_num_rows rows_fetch,
qpp.qs_est_elap_time estimated_time,
qpp.qs_act_elap_time Run_time,
qpp.qs_act_cpu_time Cpu_time
from eul_us.EUL5_QPP_STATS qpp,
fnd_user fu
where substr(qpp.qs_created_by,2,10)=fu.user_id
order by qs_created_date

SCCM 2012 - Endpoint Protection Reporting only using static end date

I have created a subscription to the Endpoint Protection/Antimalware Activity Report built into SCCM2012/Endpoint Protection.
My problem is that I am having trouble getting the dates to work correctly. I want to have the report automaticlly emailed out every monday morning with the status from the last 7 days (i.e. since the last monday report).
However the subscription seems to want a static end date. That is, every monday when the report runs it gives me a status report from the exact same 7 days. Not the most recent 7 days.
How do I go about changing this so it is useful and that every monday it runs, the report it creates/sends is from the the last 7 days?

I hope this helps (I am still testing it) but I did this by:-
"Editing" the default report such as "Antimalware activity report".
To avoid corrupting this default report before you change anything select SaveAs and call it something like "Antimalware activity report
for the last 7 days".
Open Datasets, StartEndDates and replace the query with this for the last 7 days
"select DATEADD(day,datediff(day,0,GetDate())- 7,0) as StartDate, DATEADD(day,datediff(day,0,GetDate()),0) as EndDate"
Then open Parameters, StartDate and under General change it to "Hidden".
Then open Parameters, EndDate and under General change it to "Hidden".
Save and test
I had to set the "default value" on each parameter, per Lillonel:
StartDate : =DateAdd("d",-7,Globals!ExecutionTime)
EndDate : =Globals!ExecutionTime
It looks like it is using a 7 day window now.

List distribution doesn't reflect the treatment split, Siebel Marketing 8.1

hi,
I have a segment tree with 2 branches. The first branch is assigned to treatment A, the other one to treatment B. If I load the campaign then 2 lists are generated and the number of clients reflect the treatment splits. However if I launch the campaign then the produced 2 vendor lists contain all clients of the segment tree. I expected that the vendor lists will also contain only as many clients as many I assigned to each treatment. Am I wrong or I'm missing something in the configuration?
thanks
Gyorgy

I didn't remember if I already tried it, anyway, I tried now:
asa-oi(config)# sh run nat
nat (inside,outside) source static any any destination static PoolAnyConnect PoolAnyConnect route-lookup
nat (outside,inside) source static PoolAnyConnect PoolAnyConnect route-lookup
but no difference, had the same problem...
Btw, when I try to connect via SSH, these logs messages appears: (don't know if it can help)
Syslog ID: 302013
Source IP Add: 10.6.4.1
Source Port: 2181
Dest IP Add: 10.4.11.2
Dest Port: 22
Description: Built inbound TCP connection 202412 for outside:10.6.4.1/2181 (10.6.4.1/2181)(LOCAL\VpnAnyConnect) to identity:10.4.11.2/22 (10.4.11.2/22) (VpnAnyConnect)
Syslog ID: 302014
Source IP Add: 10.6.4.1
Source Port: 2181
Dest IP Add: 10.4.11.2
Dest Port: 22
Description: Teardown TCP connection 202412 for outside:10.6.4.1/2181(LOCAL\VpnAnyConnect) to identity:10.4.11.2/22 duration 0:00:30 bytes 0 SYN Timeout (VpnAnyConnect)

Customer Receivables Aging Report doesn't show correct data

Hi Experts,
I have some problem when executing Customer Receivables Aging Report.
I'm using 8.8 PL14.
(It should be bug this is very strange ...)
I can't get same result even if I run it continuosly when I selected option "group by Customer" .
Total amount of balance due is change each time because of BP shown in the report is change.
I also got the message " Data is not available, modify selection criteria and re-enter" even though I never change selection.
During executing this report, no Invoice and JE and banking data were input.
Please advice if you know about this error or having something information.
Thanks,
Kaori Shirasuna

Hi,
The latest patch level available for B1 8.8 is PL16. it will be released on week Oct 25-29, 2010. You may directly upgrade to this latest patch level to solve the issue. If you want to try using query SQL to generate the aging report, there are some threads discussion about the query. You may search it in the SBO reporting and printing forum.
JimM

Select employee list on HR portal

Hi Experts,
We have a customizing process on our HR portal about performance appraisal with ADOBE form. The manager can select the employee list by choosing level one employee list or level 2, 3...employee list. For example, one general manager A can choose manager B as N1 employee or engineer C under manager B as N2 list.
The situation is, when one of our general manager want to display N2 employee list, it needs to spend a lot of time since there are many emploees under his position, sometimes it will time out. I tried to get the SQL trace from ST05, and there are always one SQL statement during the N2 employee list select process is to select data by jion table HRP1001 and PA0001.
I have no idea how can I improve the seletion process to make list easlier, please give me your command if possible.
Thank you very much.

Hi Joseph
It seems you are using your own ABAP / recursive logic to retrieve 2 or more levels below the department head.
Had you explored using standard SAP structural authorizations in your set up ? Just my 2 cents.
Gregg

Reduce Working Days by Emp Start and End Dates

I'm banging my head trying to get this working. The set-up:
DimResources table with various employee information including a Start and End Date.
A Calendar table with FullDate, Year, Quarter....WorkingDays (1 for working and 0 for non-working) and WorkingDayNumber (working days increased by 1, weekends are not).
Page View report with page view filters for Business, Role, Month, Week, Year.
In the calculation the denominator is total working days for the period * 8. Works great. Further reduced by any submitted time off. Again, so far so good. The part I'm having trouble with is trying to further reduce total working days by
the number of days the person wasn't available in a month, defined by the person's start or end date.
The calculated field works great when only 1 person is selected. As soon as more than 1 person is selected or the slicer is cleared, an error is thrown.
Any ideas on what is wrong or better ways to accomplish what's needed?
TotalWorkingDays2CF=CALCULATE
SUM(Calendar[WorkingDays]),
FILTER(Calendar,Calendar[WorkingDays]=1),
Calendar, DATESBETWEEN(Calendar[FullDate],SUM(DimResources[Start Date]),SUM(DimResources[End Date]))
Error:
<detail>
<ErrorCode>rsErrorExecutingCommand</ErrorCode>
<Message>Query couldn't run for dataset 'Tablix41DataSet'.</Message>
<ProductName>Power View</ProductName>
<ProductVersion>11.0.2150.3</ProductVersion>
<MoreInfo>MdxScript(Model) (10, 27) Calculation error in measure 'Calendar'[TotalWorkingDays2CF]: An invalid numeric representation of a date value was encountered.</MoreInfo>
</detail>
Dennis DeRobertis

ok, but this is not a running total but just a sub-total/grand-total
so what you can do is the following:
create two measures - first calculate the workdays per ressourcen and second use SUMX() to get the sub-/grand-total if multiple employees are selected (e.g. subgroups, groups,division, etc)
WorkdaysRessource:=CALCULATE(
COUNTROWS('Date'),
FILTER('Date',
'Date'[Date] >= CALCULATE(MIN('DimResources'[Start Date]))
&& 'Date'[Date] <= CALCULATE(MIN('DimResources'[End Date])))
Workdays:=CALCULATE:=SUMX(
'DimResources',
[WorkdaysRessource]
hth,
gerhard
Gerhard Brueckl
blogging @ http://blog.gbrueckl.at
working @ http://www.pmOne.com

Start Date,End Date prompt issue

Hi
I have a problem for prompts related to start Date and End Date selection i.e
Start Date                   End Date
01-Jan-2007                 31-Jan-2007
01-Jul-2008                  31-Jul-2008
The issue is if the user select the Start Date from a list of values(prompt) the End Date LOV's should appear only from its related Start Date i.e
If Start Date is selected as 01-Apr-2007 then End Date LOV's should start only from 30-Apr-2007
and the End Date LOV's should be seen only for the next 12 months i.e only till 31-Mar-2008
Please suggest me how I can resolve this prompt issue

hi there,,
you can not do that at the prompt form
coz every prompt is independent from the other.
good luck
Amr

How Do I Filter a Report Using a Multi Select List Box and Specifying Date Between Begin Date and End Date

Hope someone can help. I have tried to find the best way to do this and can't seem to make sense of anything. I'm using an Access 2013 Database and I have a report that is based on a query. I've created a Report Criteria Form. I
need the user to be able to select multiple items in a list box and also to enter a Begin Date and End Date. I then need my report to return only the records that meet all selected criteria. It works fine with a ComboBox and 1 selection but can't
get it to work with a List Box so they can select multiple items. Any help is greatly appreciated while I still have hair left.

The query should return all records.
Let's say you have the following controls on your report criteria form:
txtStart: text box, formatted as a date.
txtEnd: text box, formatted as a date.
lbxMulti: multi-select list box.
cmdOpenReport: command button used to open the report.
The text boxes are used to filter the date/time field DateField, and the list box to filter the number field SomeField.
The report to be opened is rptReport.
The On Click event procedure for the command button could look like this:
Private Sub cmdOpenReport_Click()
Dim strWhere As String
Dim strIn As String
Dim varItm As Variant
On Error GoTo ErrHandler
If Not IsNull(Me.txtStart) Then
strWhere = strWhere & " AND [DateField]>=#" & Format(Me.txtStart, "yyyy-mm-dd") & "#"
End If
If Not IsNull(Me.txtEnd) Then
strWhere = strWhere & " AND [DateField]<=#" & Format(Me.txtEnd, "yyyy-mm-dd") & "#"
End If
For Each varItm In Me.lbxMulti.ItemsSelected
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
Next varItm
If strIn <> "" Then
' Remove initial comma
strIn = Mid(strIn, 2)
strWhere = strWhere & " AND [SomeField] In (" & strWhere & ")"
End If
If strWhere <> "" Then
' Remove initial " AND "
strWhere = Mid(strWhere, 6)
End If
DoCmd.OpenReport ReportName:="rptMyReport", View:=acViewPreview, WhereCondition:=strWhere
Exit Sub
ErrHandler:
If Err = 2501 Then
' Report cancelled - ignore
Else
MsgBox Err.Description, vbExclamation
End If
End Sub
If SomeField is a text field instead of a number field, change the line
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
to
strIn = strIn & "," & Chr(34) & Me.lbxMulti.ItemData(varItm) & Chr(34)
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Font Size in ABAP List report

Hi ,
I want to know how to change font size in ABAP list report.
I want to enlarge the font size.
I have tried print control but it doesn't work.
I have also tried line size and line count
but it can only reduce the font size .
Thanks.
John

Hi Kong,
Try with following example:
REPORT ZFONT NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
PRINT-CONTROL FONT 1 LPI 6.
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.
End of Program
thnks
Anurodh

Disco Report doesn't return data for a responsibilty

Hi Guys,
We have a report, we have shared with XXX Tax Manager. When we login through XXX Tax Manager, it doesn`t return data. But when we do similer with XXX Payables Manager, report runs fine and return data?
Can any one help me on this.
Note: Both Responsibility have access to the Business Area.
Thanks,
Nick

Please find the below query:
SELECT /*+ NOREWRITE */
o101613.expense_account_num AS e264170,
o271954.description AS e271961, o271954.po_number AS e272013,
o271954.project AS e272033, o271954.task AS e272035,
o271954.expenditure_type AS e272036, o272183.amount AS e275461,
(o272183.gl_date) AS e275566, (o272183.invoice_date) AS e275578,
o272183.invoice_id AS e275580, o275448.invoice_id AS e275581,
o272183.invoice_number AS e275584,
o272183.self_assessed_flag AS e275674,
o272183.ship_to_location_code AS e275681, o272183.state AS e275685,
o272183.tax_amount AS e275695,
o272183.tax_jurisdiction_code AS e275698,
o272183.tax_rate AS e275700, o272183.vendor_name AS e275720,
o272183.vendor_number AS e275723, (o278494.gl_date) AS e278500,
o278494.liability_account AS e278501
FROM apfg_ap_invoices o101612,
apfg_ap_invoice_distributions o101613,
apps.ap_invoice_lines_v o271954,
(SELECT ap.invoice_id, aps.vendor_name, aps.segment1 vendor_number,
ap.invoice_num invoice_number, ap.invoice_date, ap.gl_date,
apl.amount amount, zxl.tax_amt tax_amount,
zxr.percentage_rate tax_rate, zxl.tax_jurisdiction_code,
apl.ship_to_location_code, zxl.self_assessed_flag,
hzg.geography_element2_code state, apl.line_number
FROM ap.ap_suppliers aps,
ap.ap_invoices_all ap,
zx.zx_lines zxl,
apps.ap_invoice_lines_v apl,
zx.zx_rates_b zxr,
zx.zx_jurisdictions_tl zxj,
zx.zx_jurisdictions_b zxb,
ar.hz_geographies hzg
WHERE aps.vendor_id = ap.vendor_id
AND ap.invoice_id = zxl.trx_id
AND zxl.trx_id = apl.invoice_id
AND zxl.trx_line_number = apl.line_number
AND zxl.entity_code = 'AP_INVOICES'
AND zxl.event_class_code = 'STANDARD INVOICES'
AND zxl.self_assessed_flag = 'Y'
--AND zxr.tax_rate_code = zxl.tax_rate_code
AND zxr.tax_rate_id = zxl.tax_rate_id
AND zxj.tax_jurisdiction_id = zxl.tax_jurisdiction_id
AND zxb.tax_jurisdiction_id = zxj.tax_jurisdiction_id
AND zxb.zone_geography_id = hzg.geography_id
AND zxl.tax_amt <> 0
AND apl.line_type_lookup_code IN
('ITEM', 'FREIGHT', 'MISCELLANEOUS')
AND apl.line_source IN
('HEADER MATCH',
'MANUAL LINE ENTRY',
'IMPORTED',
'CHRG ITEM MATCH'
AND ap.cancelled_date IS NULL
ORDER BY aps.vendor_name, ap.invoice_num) o272183,
apps.ap_invoices_v o275448,
(SELECT xte.source_id_int_1 invoice_id, gcc.code_combination_id,
xte.transaction_number, xal.accounting_date gl_date,
gcc.segment1
|| '.'
|| gcc.segment2
|| '.'
|| gcc.segment3
|| '.'
|| segment4
|| '.'
|| segment5
|| '.'
|| segment6
|| '.'
|| segment7 liability_account
FROM xla.xla_transaction_entities xte,
xla.xla_ae_headers xah,
xla.xla_ae_lines xal,
gl.gl_code_combinations gcc
WHERE 1 = 1
AND xte.entity_id = xah.entity_id
AND xte.application_id = xah.application_id
AND xah.ae_header_id = xal.ae_header_id
AND xal.accounting_class_code = 'SELF_ASSESSED_TAX_LIAB'
AND xal.code_combination_id = gcc.code_combination_id) o278494
WHERE ( (o101612.invoice_id = o101613.invoice_id(+))
AND ( o101613.invoice_id = o271954.invoice_id
AND o101613.invoice_line_number = o271954.line_number
AND ( o272183.invoice_id = o271954.invoice_id
AND o272183.line_number = o271954.line_number
AND (o272183.invoice_id = o275448.invoice_id)
AND (o278494.invoice_id = o275448.invoice_id)
AND (o101613.dist_line_type_code IN
('ITEM', 'FREIGHT', 'MISCELLANEOUS'')')
AND (o101612.invoice_number = :"Invoice Number ")
AND ((o272183.gl_date) <= :"Ending GL DATE")
AND ((o272183.gl_date) >= :"Beginning GL DATE")
ORDER BY o271954.project ASC, o272183.invoice_number ASC;
It does not contain any security profiles, only contains view that might be not returning data.
thanks

Change infotypes end date when delete leaving action for employee

Hello,
I created new infotype and when employee leaves its end date is changed for leaving date.
When leaving action is deleted ther is some least of infotypes that user can sign so the end date of selected infotypes will be changed to 31.12.9999. How can i add my infotipe to this list?
Thank you,
Paulina

Hi,
Maintain IT 0041 where in that table maintain employee start date of hiring and leaving date of employee bze in IT 0000 the dates will change as per action lets say if employee hire that date will be in IT 0000 action and if employee gets promotion date or leaving date that will store in IT 0000 by delimiting other actions
So maintain IT 0041 where you can pull dates from there if you maintain
End date will always be 31.12.9999 so check action start date you will get in sequence
Thanks
Edited by: Vibinsap on Mar 9, 2012 7:12 AM

Report for Validity Start and End Date in PO

Dear All
Is there any report where I can get PO validity start and end date which user input in addtional data header tab of PO?
Regards
Satish Kumar

Hi,
Yes, It is available standard report using T-code ME2N - Purchasing Document (PO) Per Document Number, enter the T-code and provide the following input data's are as follows.
Scope of List                 : ALV ( for Ms-Excel format report)
Plant                               :   __________ to __________ (if required)
Document Date              : ____________ to ___________ (if Required)
Execute the report shown by default in excel format and if required PO validity start and end data, you have to select Change Layout button and open new window options screen right side field option as Validity Per.Start, Validity Period End, Commutative number field data's are selected and click <--- arrow button and then click bottom tick marked button. Now, the report shown your requirement.
Hope, it is useful for you,
Regards,
K.Rajendran

Profit Center Report doesn't show data

Dear Experts,
I've posted some data thru FB50 in FI, with different cost center assignment 1201 and 1202. Both cost centers are assigned to profit centers, YB110 and YB120 respectively in master data.
Then, I tried to run a profit center report, S_ALR_87013326 from Profit Center Accounting (PCA) module but doesn't show any data.
Do I need to do any period-end processing in order to get the data out from PCA report?
By the way, the selection required for plan version, I just keyed in '0'. Not sure of the number, where to find the plan version as I didn't create any plan before this.
regards,
Abraham

Hi
If you see the screen shot I attached, it has the text "(new)" against the Folder name...
All new gl reports are under such a folder to differentiate... You cant deactivate any reports from the Standard Menu... You can just control it by authrization....
You can also ask your BASIS guy to display only the authorized trans on the user screen so that they are not able to see the std set of transactions
Br, Ajay M

BW Employee Hierarchy report to be specific for the users.

Hi *,
My BW system contains the data from HR. There is a report which displays the list of all employees in a strict hierarchial manner with the topmost position being assigned to the highest designation.
Now the change to this report should be done in such a way that the user who logs in should be able to see only his/her group. That is all the employees who report to him should be displayed with this user at the top.
Is it possible ? I can create a new report also if required.
Please suggest so that I can assign points.
Regards,
Srinivas

Hi Srinivas,
First u need to make that Info Object as Auth Relevant.
InfoObject > BusinessExplorer tab > Auth Relevant
In RSSM u need to generate the Auth Object for that.
Authorization Object
Regards,
Ram.

Payables Employee Listing Report Doesn't Reflect End-Date

Similar Messages

Maybe you are looking for