Font Size in ABAP List report

Hi ,
I want to know how to change font size in ABAP list report.
I want to enlarge the font size.
I have tried print control but it doesn't work.
I have also tried line size and line count
but it can only reduce the font size .
Thanks.
John

Hi Kong,
Try with following example:
REPORT ZFONT NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
PRINT-CONTROL FONT 1 LPI 6.
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.
End of Program
thnks
Anurodh

Similar Messages

How to edit font of printer depend on size of abap list report.

Hi all,
How to edit Format type"X_65_255" of HP Laser printer when print out the same preview in abap list?
Example:
I want print as below:
     Title of abap list:                 AAAAAAAAAAAA --> size 15
    body of abap list:
                                           colum1   column2   columm3 ---> size 10
                                            s1          cccc          bbbb    -
> size 10
I need it whenever you find time out of your busy schedule.. Please help me .. Thank you so much.
Edited by: kishan P on Oct 13, 2010 12:02 PM

Hi,
I have to set font type on matrix printer.
Can You please explain how did you find
\e(s0p24h15v0s0b16602T
for
select arial 24 cpi 15 point normal
As I can see, all the escapes defined in "Printer initialization" are in
\e\0xqw\0xer0x\tz
form, where qw, er, tz are hexa decimal interpretation of escapes from printer manual.
I am confused where did You find annotation such as
\e(s0p24h15v0s3b16602T
Thank you, cheers.
p.s. - if You want me to open another subject with this question so I can express my gratitude, please let me know.
p.s. - in SPAD > Device Type, Print Control tab, we have
SF005     |     1B6B001B4D121B57001B461B35
and I know the
"1B"
stands for
\e
but then at "6b........" I am lost...

Can we control Font and Font size in Non-alv report list ?

Hi Experts,
Can we control Font and Font size in Non-alv report list ?
Regards
vishnu

Hi,
see if this is useful to you,
PRINT-CONTROL SIZE 2 COLOR BLACK FONT 5.
you can go through this link,
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dba62335c111d1829f0000e829fbfe/frameset.htm
Regards,
Abhijit G. Borkar

Font size in abap reports

hi all,
is it possible to increase font size in abap reports.
i am trying to print a Zreport which is having line size of 325 . so i decided to print on A3 landscape . it seems to be printing very small size ,cannot be readable! . in this case i have to increase the font size of the output.
is their possibilities to do.
reply asap,
regards
vijay

Hi Vijay,
You can increase the font size during printing dynamically. In the Device Types -> formats, which ever format you are using, you can ask your Basis person to edit the format and increase the font size. Also the page setup like portrait, landscape, CPI, etc can be done there itself.
See the below link it will help...
http://www.sap-img.com/basis/how-can-i-print-a3-format-in-sap.htm
Regards,
P. Kumaravel.

Size in ABAP list.

Hi expert ,
How to edit font and size in ABAP list ?
Currently, I'm writing code as below but not effect in my ABAP list.
PRINT-CONTROL SIZE 50 COLOR BLUE FONT 20 LPI 10.
WRITE: / ' test font and size'.
pls help me . Thank you so much all.
Edited by: kishan P on Oct 12, 2010 3:32 PM

Try with this copied from SAP IMG website
REPORT ZFONT NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
Start of print-control
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
SKIP.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
SKIP.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
Depending on your SAP printer device, this may also work
PRINT-CONTROL FONT 1 LPI 6.
you can try to change font and LPI numbers
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.
*--- End of Program

Decreasing the font size in a Classical report

Hi all,
i have to decrease the font size in the output of a classical report while printing. I have tried the following snippet:
NEW-PAGE PRINT ON LINE-SIZE zeichen_pro_zeile
                    LINE-COUNT zeilen_pro_seite
                    NEW LIST IDENTIFICATION rl04i-prnew
                    KEEP IN SPOOL rl04i-prrel
                    IMMEDIATELY rl04i-primm
                    LIST NAME rl04i-plist
                    DESTINATION drucker
                    NO DIALOG.
*PRINT-CONTROL LPI 6.
   PRINT-CONTROL LPI 10.
but this is not working fine.
Can anybody suggest something about it?
Regards,
Divya

Hi,
It is not possible to decrease the font-size in a classical report.
We don't have any option to format the output in the reports..
As per my knowledge, it is not possible to decrease or increase the font size in a classical report..
one thing u can do is to do some setings at the printer side...
Cheers,
Simha.

ABAP list report, multiple selections - select-options

I have written a very simple ABAP list report, that contains a single select-option. On the selection screen, I have the option of entering multiple values, with each new value being displayed directly underneath the old, but I am only getting the first value entered on the screen displayed. Does anyone have any sample code for me?

Hi Daniel,
Select_Options consists of 4 parameters, in with the range consists in eg...
Select-options s_vbeln for vbak-vbeln.
then s_vbeln-low, s_vbeln-high are the range values...
So whne you write select query.
write vbeln in s_vbeln
instead of vbeln eq s_vbeln
Hope this solves your problem.
Thanks & Regards,
Dileep .C

Controlling Font Size in Character Mode Reports

Hi,
The default Font size of Character mode Reports is 12. I want to reduce the font size from 12 to 8 .How to go about it.The printer codes mentioned in reports Documentation only talk about other attributes like Bold etc.Also the documentation gave the impression that The fontsize can only be controlled for Bitmap reports.Kindly help me out.
Thanks in advance.
Regards
Deepak

Deepak:
The font size for character reports is based in the printer size characters, there are: 10, 12 15 20 etc.
I believe that you want is a smaller character, try to configure your printer with condensed font in the panel of the printer, if you can't do that, try send printer codes to the printer via printer definition file.
For the printer code that you need, check the user's manual of the printer to know what code is that you need.
Look for commands in your manual
Good luck.
Ennio

Font size in abap editor

How to increase the font size in abap editor

Hi
Open the SAP GUI icon.
you can see an icon at extrme right whth green red blue colors.
or Use (ALT + F12)
click on that Select New visual design.
Thare you can find the font.
Now you can reduce or increase the font size.
Regards
Kiran.
Edited by: kiran Pasala on Feb 19, 2008 4:12 PM

Increasing the font size of an ALV report while printing it.

The requirement is to increase the font size of an ALV report while printing it. The ALV Report is coded using the Factory method.
I could find a class called CL_SALV_ITEM with a SET_FONT method but I am not sure how to link it with the CL_SALV_TABLE class from which the display table has been created. I even tried checking the report display in SPOOL transaction SP01.But I guess the font shown there depends on the SAP GUI settings.
Do you have any suggestions?
Thanks and regards
Sathya

The status bar is a fixed fontsize which does not change. While I have no problem reading the time off the status bar you should also have the time on the lockscreen and/or glance screen with a much larger font so I do not really see the issue.
I have all my music on SkyDrive so would not know for sure, but check out THIS to see if it serves your needs.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Help in abap list report printing

Dear all,i did a customized list report using abap.the usual size for report print out is A4 which is line-count 65 and line-size 255. but for this report,my line-size is 296. i define at the begining of my program with "REPORT ZMM_STKVAL_VIEW LINE-COUNT 65 LINE-SIZE 296 MESSAGE-ID ZA."
i can run this program but the output is not complete.i can only see untill the line-size of 255..anything exceed 255 kenot be displayed..
Is there anyway to overcome this problem? My user doesnt required this report to be printed out but just to download it into EXCEL file. Thank you.

Ok, if user doesn't need a list output, then simply gather the data and fire excel.
report zrich_0001 .
data: imara type table of mara with header line.
start-of-selection.
select * into table imara up to 100 rows
            from mara.
call function 'WS_EXCEL'
       exporting
            filename = 'TEST.XLS'
       tables
            data     = imara.
Regards,
Rich Heilman

How to Increase Font Size in Normal List Display

Hi All,
I needs to increase the font size in List (Normal List not ALV). How can i achieve this one. I have used Print-control option but its not working fine for me .
Please help me in this. Thanks in Advance.
Regards,
Sreedhar.T

>
Gautham Vangaveti wrote:
> You can use classes for the same.
>
> check sample program DD_STYLE_TABLE.
Are you sure that we can enlarge the font size in classical reports?
I think we can utmost use intensified/emphasize options as an work around.
Cheers

How to decrease font size in the List with Icon and Subcontext

Hi , please help me with decreasing the size of font in List View.
please refer the below link
http://postimage.org/image/q0blmxf67/
thank you.

Nihar Narla wrote:
HiPlease read the FAQ and forum sticky threads (if you haven't done so already).
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
please help me with decreasing the size of font in List View.The presentational aspects of APEX applications are controlled using a combination of HTML and CSS via themes and templates. The basic answer to controlling font sizes is: use CSS. It's not possible to be more specific without the information detailed above.
please refer the below link
http://postimage.org/image/q0blmxf67/
Instead of posting screenshots on dubious sites popping up bizarre images, create examples on apex.oracle.com as described above.

ABAP list report wont print on Z device type with Z format

Our developer have created a report which outputs data in ABAP list format and the standard format would not fit. We have since created a custom format and copied a device type in to custom device type. So we now have a custom format and custom device type. However when we print, it spools correctly and shows as green but the report wont print. The only thing that gets printed is
"Sort criteria AscdgDescndSubtotalGRAND TOTAL : X X PROJ" "
The abap list format is Z_100_500. Basically the report has 450 columns and hence we created this format.
I am not sure what this means. I have been advised by SAP to follow instruction on note 17895 - Adapting print list formats for customers however i cant fully comprehend point 5 of the note and I believe this is why it wont print. Has anyone adapted ABAP list using this note. Can you please let me know how i should go about printer initialisation mentioned in the noted.
We have checked everything however dont seem to get around the issue. Any ideas will be appreciated

No comments

Font Size in Character Mode Report

Hi ,
I have to print a report in a pre printed Stationary, which has tabular columns The columns are little bit small . when i have bigger data say value like 9999999.45 it over prints on the pre printed text. is it possible to reduce the size of the data at these places and be normal in other parts of the report.
i.e. Font size reduced inside the tabular column and normal for the remaining part of the report
Will appreciate the help

Font size in character mode report cannot be control through Oracle Report.
 
You can use report .prt file or manually set the printer to print character in small size.
 
Raj 
www.oraclebrains.com<a>
 POWERED by the people, to the people and for the people WHERE ORACLE IS PASSION.

Font Size in ABAP List report

Similar Messages

Maybe you are looking for