Paying the price for faulty customer service

We were given faulty information by multiple customer service reps and store reps and now we have to pay almost $200. How is that fair? Our daughter got married and moved to an area where she could not get any data service and spotty talk service. She called Verizon a month before she moved to tell them of the poor coverage area she was moving to and was told that the cancellation fee would be waived if that was the case. During the next few weeks we were in two different Verizon retailers and asked about it and they said the same thing. We called customer service again the day before she switched carriers and were told that he could not waive any potential fee for us at that time and to wait until after she switched and that if a cancellation fee showed up on our bill we could call at that time and dispute it. NOW, a month later, we have the cancellation fee on our bill and I called in and was told that we should have called tech support to have them verify the spotty coverage before she changed carriers and now it is too late to do anything about it. NOTHING was said about that before and we were even told to wait and then dispute it. We have been Verizon customers for several years, have 4 lines with them and was about to add a fifth, but now we are rethinking our service with Verizon and will be checking into other alternatives.

Mandy1695 wrote:
even if you preview the song it only plays 30 seconds of a song
You mean if you preview it. My previews are 90 seconds.
Is iTunes up to date? (10.6.3)
Redownload the songs -> http://support.apple.com/kb/HT2519

Similar Messages

  • HP wins the award for worst customer service

    I placed an order for an HP laptop dv6t quad edition on the 22nd of march 2011. HP graciously charged my card and took the money out on the 24th of march. The tentative shipping date they gave me was for the 5th of April. I waited till the 6th and since there was no movement on the order status, I decided to call and guess what. The highly (in)competent customer service team couldnt answer why the order was delayed and since the phone line was so choppy I asked them to call me back. They however did not. I had to call them after 30 mins and again request the same information. After learning that nothing  was going to happen to the order for the next few days, I requested them to cancel. Now the fun starts, The claim that they can raise a cancellation request but cannot confirm it, There is a possibility that the product might be shipped soon and if it does, it becomes my responsibility to ship it back to HP. More over as per the customer service, it will take 24 to 48 hours for final cancellation and another 3 to 5 business days to refund my amount. Well that is not the end of it, I get another email that evening informing that the shipping is delayed by a week and it might take a maximum of 10 days and if I choose to cancel it, I need to call the customer service team and raise a request. This ticked me off and I called them again to confirm why my order hasnt been cancelled even after they knew that the product was not completed. They go on yapping for half an hour and finally I lost my patience and requested to speak with the manager. They would not let me speak and kept telling me that they will try and find the manager but they cannot confirm if the manager is available. Well after me standing on my ground the manager finally gets on the phone, Introduces herself and then gives me the whole attitude again. On top of everything the manager tells me that HP has not charged my card and its on hold with my bank, Fortunately I did check with my bank and they did inform me that the amount was deducted on the 24th and  it was not on hold. After I mentioned this to the manager her story changed and she agreed to expedite the cancellation but still it would take 24 to 48 hours. I seriously think HP should stop advertising for products that they cannot produce and ship on time. Unfortunately I did work with HP and its sad that this company is going down south, way down. Pathetic.. that is all I can say.

    Thank you for visiting the HP Support Forum. This is a peer to peer community for customers to connect and share solutions on their HP consumer products. If you have direct feedback for HP about their products or services, please use the link below.
    http://welcome.hp.com/country/us/en/wwcontact_us.h​tml
    If you have other questions and concerns, please feel free to send me a private message.
    MrMatthew - HP Support Forums Moderator
    Click the Kudos star as a way to say "thank you" for helpful posts.
    Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.

  • How to set the price for product in service channel site

    Hi
    In R12 I had registered the Partner using Register as a partner link.After registration I saw the site selection page i clicked the "Channel services" site. And i click the "Products" tab i see the product only i does not see any price for it. and only one product has the price i clicked the "Add to cart" button and i had seen the error      
    Error           
    The column(s), PRICE_LIST_ID, has an invalid value(s), 11833 .
    The column(s), PRICE_LIST_ID, has an invalid value(s).
    what i want to do solve this error.
    And also i was trying to enroll in the partner program by clicking the "VisionOne authorized partner program" from the Available programs bin i saw the error message when i click the "Enroll now" button
    " The following input contained illegal input value, please re-enter your input or contact the system administrator: "
    Thanks

    Hi;
    Please make a search at metalinks as "The following input contained illegal input value, please re-enter your input or contact the system administrator", There are more than 6 notes mention this error message
    Regard
    Helios

  • What is the RDS for SAP Customer Service (CS) Module

    I am about to implement SAP CS Module (Customer Service) within my ECC 6.0 EHP 6. But I do not have the Budget (over 100 000 Euros) to run a classic implementation. Therefore, I am looking for a corresponding RDS (Rapid Deployment Solution) or any other Accelerator to lower the cost to a minimal. Can anyone advise ?

    1-866-772-3623
    On the other hand, I wasted the better part of a day with the phone support with no success at all on the same problem. A moment ago, however, a Live Chat tech support person at Adobe, Sudrahan, I believe, solved it immediately, literally within seconds.

  • I bought my software pack iWork 2008 at the apple retail store and I cannot get any updates and apple App Store won't help me.   Does any one know how I can get the upgrade without paying full price for a second time? I paid $99 for the iWork family pcan'

    I cannot believe that apple is refusing to help a customer who bought and paid for iWork software just because I bought it from the retail store the App Store says they cannot allow me to upgrade.  I have never heard of such.  It should to matter where I got it i bought apples software and I don't et how the retail store can be different frothe App Store my god its all still apple.  So stupid.  I will not pay full price for the upgrade.   Also I purchased Logic Studio and 2 days later the upgrade came out and they will not let u upgrade ?  I think there should be at Least a 30-45 day window if u purchase software and they release the upgrade u should get not.    It's not like apple doesn't make enough money already.  

    iWork '08 & 09 installed from the retail disk or from the downloaded trial must be updated through Software Update. Those installations will not be recognized as installed by the Mac App Store. In Mountain Lion Software Update has been "rolled into" the Mac App Store. Choose Software Update from the Apple menu just like you always have & the Mac App Store will launch. Depending on what you have that needs updating you may see two sections in the MAS window.
    But, as always, if you're not running the latest versions of the iWork apps installed from a retail box or the downloaded trial & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. If you installed from the downloaded trial or the retail box, they must be in the iWork '08 folder in Applications. That iWork folder must be named iWork '08. If it doesn't have the '08 Software Update won't find them & the updaters won't work.
    If you are running Pages 3.0.3, then you do have the latest version of Pages from iWork '08. If you want to upgrade to iWork '09, you will need to purchase the new version, just like everyone else. The good news is that you can buy just the individual iWork apps - Keynote, Pages & Numbers - that you need or want for $20 US each from the Mac App Store & then install them on as many Macs as you need using the same Apple ID.

  • Can anyone give a good contact number for someone in the upper level of customer service

    can anyone give a good contact number for someone in the upper level of customer care i have talked to two of the worst people from customer service, the "supervisor" who was very appropriate did give me a address to mail a complaint which i will but being a disabled veteran of the Iraq war and a member of the wounded warrior project i get upset at certain people who show no respect for the average person and even worse of an attitude to those injured serving their country. I'm in no way saying I'm better its just that i expect a grain of respect as a person, a fellow American working everyday just to get by. my issue was not an impossible issue to resolve but i was told by one rep that it was not possible after my call being "dropped" i called back and talked to another. Luke from call center Washington state told me it was possible but that the phone i ordered two days prior (that rep failed to finish the order)was no longer available and i could pick a different phone not on back order.......i mentioned my confusion to the lack of service and being told two separate things. i asked why this was when i was not the one who made the mistake he told me it was not there fault and pushed the blame to me....he then called me dude and started to speak over me. when i asked to speak to a supervisor he asked why i told him i was no longer interested in talking to him he said why, i asked to be transferred again he kept refusing saying listen man I'm trying to help you what do you want. i asked to speak to his supervisor at least three more times he refused. i asked for his employee information so i could call back to report his rude behavior he refused to give me anything except at the end he finally told me his name.. there is more but my hand is tired is there anyone who can help me? if i find an answer as i will be posting this to many sites i will post it here.

        Hello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • Enter the price for the service item

    Dear Experts,
    We are implementing SRM 7.0 and we have upgraded our system with Service pack 7.Created a limit SC and approved at all levels. After approving SC system created PO in SRM but did not replicate to backend ECC system. When I looked PO in edit PO mode and system throws an error message "Enter the price for the service item".
    Have any body faced this issue? If yes please guide me how to fix this issue or Suggest me any useful link or OSS messages.
    Thanks in advance.
    Thanks
    Umakanth

    Hello,
    I assume you are using a Product category configured for Extended Classic scenario.
    In this case a limit item in SC creates limit item in PO(in SRM). But when this PO is replicated to R/3, it always creates item with type 'D' for limit item in PO.
    Now with respect to error message you get, can you check if you have specified all LImits (Overall value, Expected value etc)?
    You can also try creating a PO directly in SRM with limit item (use same Product category as above) and see if it replicates.
    If you get the same error, please raise a OSS message for SAP.
    Thanks,
    Sushil

  • I purchased a License for Adobe Photoshop Elements 13 plus Adobe Premiere Elements 13 and Adobe doesn't recognize the License Key, Adode customer services aren't interested.

    I purchased a License for Adobe Photoshop Elements 13 plus Adobe Premiere Elements 13 and Adobe doesn't recognize the License Key, Adobe customer services aren't interested, neither are Ebuyer.com.
    Where do I go next? Credit card company to ask for a refund?

    57dibbs
    Has you contacted the seller through its Customer Service?
    If that is the case and Customer Service has no idea of what you were given as a Product Key and how to use it, have you considered asking
    your question in the seller's forum (PC software section)?
    But, I have another idea for you to try first....are you involved in a student teacher purchase with prepaid card? If so, please click on the following link
    http://helpx.adobe.com/x-productkb/global/find-serial-number-student-teacher.html#card-sub mit-product-code
    and go to the section on "I received a prepaid card, and I need help". In that section go to "2" which is for
    "Submitting my product code and proof of eligibility to Adobe". You will notice there is a link to click on that
    is related to country. Make the appropriate choice and see if that solves the problem. You should see
    Visit the page listed on the back of your prepaid card to submit your code and proof.
    For customers inside North America, www.adobe.com/go/edu-validate
    For customers outside North America, submit through your region's customer portal below:
    Europe, Middle East, Africa | Germany | France | Spain | Italy | Netherlands | Czech Republic | Poland | Asia/Pacific | Korea
    Verification can take anywhere from 2 to 30 days to validate.
    If the above does not apply to you, then I would explore the seller forum for answers if you cannot get them from Adobe Chat or the seller's
    Customer Service. Getting your money back from the seller should be tried as soon as possible if you find no solution.
    Thank you.
    ATR

  • Dear Sir, I am registered customer of Adobe Illustrator CS6. I want to update the adobe to Adobe CC the latest software. What is the price for updation.

    Dear Sir
    I already have adobe illustrator CS6. I want to update to Adobe CC. Can you please send the price for the updation.
    Thanks
    Rajan

    Full prices can be found here:
    https://creative.adobe.com/nl/plans?store_code=nl
    The price for a single applications is €24,- a month

  • Brand New T410s Arrives Defective - I have to fix it myself - Don't pay the premium for Lenovo

    Don't pay the premium for "Innovative and Professional Grade" Lenovo products.
    I purchased a Lenovo T410s with an onsite warranty. It arrived and would not boot because of a bad hard drive. I called tech support and they had no record of an onsite warranty. I was put on hold and transfered to Customer Service. I provided my customer and order numbers but they could not find the onsite warranty either. I was required to fax my receipt to prove that I paid for the onsite warranty.
    I was told I needed a second case number for the system software. Then I was told I would need to reload the machine myself. The system restore disks will take 3-5 days to arrive. So much for next day onsite support. Then it was recommended that I just fix everything myself because I could do the repair at my convenience.
    I was very frustrated and regreted the purchase so I asked to return the laptop. The sales department's floor manager offered an RMA with a 15% restocking charge. I was told that it is company policy to require a re-stocking charge on defective products that technical support could fix. I asked multiple times for reconsideration and the floor manager said that was the final word. I asked to escalate my problem and the floor manager responded that I would not get a different answer because he was quoting company policy. I asked for confirmation that company policy was to penalize the customer if they want to return defective product and were dissatisfied with the support. He would not agree to that statement. He kept insisting that this problem was a minor inconvenience that tech support could fix, which meant shipping me the parts to fix myself. I said this was an unreasonable response to a customer that paid $1500 for an innovative, professional grade Lenovo product. The floor manager responded by quoting company policy again.
    What the floor manager did not know was that I am the EVP for a Point of Sale company that resells Lenovo products. I will be moving those purchases to a new vendor with a commitment to a better customer experience. Lenovo better spend my $225 re-stocking fee wisely because they are losing my reseller revenue.
    The rant of an abused Lenovo Customer and Reseller.
    Kevin Struthers

    Kevin,
    I'm just guessing, but I think the warranty for your specific machine (via serial number) can be checked at this webpage:
    http://www.lenovo.com/support
    in the warranty section.  I believe the warranty is activated at the manufacturing and starts when the product is shipped (that's pretty much industry standard).  Perhaps the manufacturing plant didn't activate the correct warranty and so it didn't show up correctly.
    To the best of my understanding, if the hard drive turned out to be dead, they can do an on-site repair/ replacement if you do have on-site warranty.  I am not sure, but I don't know if the replacement of the drive includes the factory installed software on the drive.  (probably fine print somewhere says if it does or not).  If the machine is DOA, right out of the box, I don't see why they wouldn't just cross ship a replacement machine to you.  Did they give you this option?
    I think I would call them back and ask for a customer satisfaction rep to step in.  And this time, tell them who you are.
    Hope that helps.
    Walter

  • Display change material price for a customer ?

    Hello,
    Could you please show mw which transaction used for displaying and changing the material price for a customer ( Based on period)
    Thanks,

    HI
    If Material price means  Moving Average Price then system will automatically determines fromthe material master in the combination plant .
    Material price means normal price then kindly check the VK11 for maintaining the condition records & VK12 for change
    Regards
    Damu

  • I bought a MBP 13 and I got the £70 App Voucher for being a student, I know want to return the MBP how can I do that? can I just pay the £70 for the app store voucher or what do i need to do? MacBook

    I bought a MBP 13 and I got the £70 App Voucher for being a student, I now want to return the MBP how can I do that? can I just pay the £70 for the app store voucher or what do i need to do?
    Thanks

    If you have redeemed the voucher for something separate from the computer, then it's a non-issue. If you redeemed it as a price reduction for the computer, then they will return only what you paid less the coupon.

  • What is the price for UK Creative Cloud?

    This URL: https://creative.adobe.com/plans shows that the price for existing qualified customers is £22.23:
    Yet when I click "Sign Up", I get a price of £27.34:
    Also, you'll notice from the screenshots above that the regular annual subscription price is different.  Note: even with 20% VAT added to the £22.23 price, the total should only be £26.68.  The regular price on the second page is also actually less than what it would be if the first page was showing prices without VAT.
    Please could someone tell me the actual prices I'll be paying!!

    Ireland's VAT is 23% thus giving you the £27.34 ; not nice but ......

  • HT2693 what is the garmin iphone application customer service number?

    what is the garmin iphone application customer service number?
    My GPS that I bought for 60 dollars got erased after i changed my apple id.  I would like a refund or the app back.  Please help
    [email protected]

    Laxman25 wrote:
    Yea because any apps with your "old" id are attached to that Id only. You can log into the iPhone settings, store, and change the apple I'd back to your old one. Redownload it and it will work. It will only work if you are logged in with that I'd. I'm not sure you will get much of an outcome with trying to get a refund. Go to the garmin website and pull support from there.
    It is not correct that it will only work if you are logged in with the original ID. You must sign into the store with your original ID and then redownload the app from the Purchased tab. Once it's downloaded, however, you do not need to remain logged into that account. However, you'll need to enter your password for that account anytime you try to update the app.

  • How does the return sales order captured the price for mat. Doc. during GI

    Dear Guru,
    We have a commercial return sales order process, which we have created a Doc Type YR01 "Commercial Return"
    everytime when this YR01 is been generated from the Customer Return PO, we need to change the MAP via tcode MR21.
    Problem here, this time the user processed with a wrong step, the user straight away to create a DO and GI for this YR01  before the MAP is changed. SO obviously the price in Material Document generated when GI is inccorect, thus a reversal for this GI and DO is done.
    After DO and GI is reversed, we update the correct MAP via MR21 and perform a DO and then GI, but we realized the Price in material document doesn't capture the latest updated MAP price.
    So after many testing, we found there are 2 ways to solve this,
    1. Recreate a new YR01 Commercial return sales order
    2. Or during the MR21, select the variance "Special Stock - Sales Order"
    Question,
    Can i know where does the SO capture the MAP price and where and which table that the MR21 will be updating when selected variant "special stock - sales order"?
    Thank you very much,
    Chee Wee

    Hi,
    The price entered in MR21 updates the price for the material in material master "accounting 1" tab page. This will update the price in the table MBEW according to the valutaion class you have assigned to the material type.
    If you are entering "Special Stock - Sales Order" in MR21. the valuation class for sales order stock should be assigned for the material in the material master "accounting 1" tab page MBEW-EKLAS, this valuation class will have an altogether different accounting, so according to me option 1 i.e reversal of document YR01 is a more easier solution.
    Regards
    Aadesh Kamat
    Edited by: aadesh123 on Jul 11, 2011 10:45 AM
    Edited by: aadesh123 on Jul 11, 2011 10:48 AM

Maybe you are looking for