Payload for restricting Camera

Could anyone please let me know the sample push notification command for disallowing the camera, I could able to push the device lock command but trying to restricting the camera gives me no luck, it would be grateful if anyone could help me. Thanks.
Please let me know if the below approach for restricting the camera is correct or not,
<?xml version=\"1.0\" encoding=\"UTF-8\"?><!DOCTYPE plist PUBLIC \"-//Apple Computer//DTD PLIST 1.0//EN\" \"http://www.apple.com/DTDs/PropertyList-1.0.dtd\"><plist version=\"1.0\">
<dict>
<key>PayloadContent</key>
<array>
<dict>
<key>PayloadDescription</key>
<string>Configures device restrictions.</string>
<key>PayloadDisplayName</key>
<string>Restrictions</string>
<key>PayloadIdentifier</key>
<string>com.apple.mgmt.restrictions</string>
<key>PayloadOrganization</key>
<string>Valuelabs</string>
<key>PayloadType</key>
<string>com.apple.applicationaccess</string>
<key>PayloadUUID</key>
<string>FE5C962D-FC1F-4585-AE97-BABBB2CFB096</string>
<key>PayloadVersion</key>
<integer>1</integer>
<key>allowCamera</key>
<bool>false</bool>
</dict>
</array>
</dict>
</plist>

Hi,
Can you please give a try to use a COMMAND node?
Below the Main Window ,, In the COMMAND node,, in the CONDITION tab pass the condition,,
SFSY-PAGE <= 2

Similar Messages

HT4623 The icons for my camera and facebook have disappeared. How can I get them back

I installed IOS6 recently on my IPhone and now my camera and facebook icons have disappeared. How can I get them back? Help!

For your camera, go to Settings>General>Restrictions and be sure that Camera is set to On. Don't know why you can't find FB, be sure you checked all your screens and inside all your folders.

My icon for the camera is missing!

Today I tried to take a picture and I can't find the icon for me to click to take one. I looked everywhere in all the folders and the folder that I had it in it wasn't there. Where did it go? Was it done during the last update that I just did? How can get it back? I couldn't have deleted it as that can't be deleted from me, like the other ones that came with the phone that I don't want.

I didn't do anything to setting the restrictions and when I tried to see what it said it said that the restrictions were on. I can access everything from the every folder to every icon except for the camera. I did use the camera two weeks ago and the only time I went into the settings since then was to find out what had to be done to fix the problem with the phone not showing the change to day-light savings.
I couldn't have done anything to do with the restrictions because when I went into see how things are set up I had to type in the password. I don't remember what the password is nor do I remember if I even created on. With all this how could I have gotten in the restrictions and did something to make the camera inaccessible? If I did the reset what would it do with what I have personally set up in the phone?

HT201401 I 'lost' the icon for the camera. how do I retrieve it?

I 'lost' the icon for the camera. how do I retrieve it?

Check Settings>General>Restrictions to be sure Camera is On. If it is, swipe your screens to the right and search for Camera. If it's hiding in a folder, the name of the folder will appear to the right of Camera. If you don't see a folder name, it's not in a folder, but is on one of your screens so search for it. If all else fails, go to Settings>General>Reset>Reset Home Screen Layout. This will restore the original home screen layout but will rearrange your apps in order to do so.

The Icon for the Camera is gone?

the Icon for the Camera is gone? How do I get the Camera to work again? It is a Ipad2 16G

Check restrictions
Settings>General>Restrictions>Camera

Urgent Help Needed for WVC210 camera setup :)

Please help! I am trying to set up a Cisco WVC210 surveilance camera at one of the stores owned by the company I work for. Its a small business and I am the closest they have to an I.T person !! I have plenty of experience with software but not much on networking so need some idiot proof guidance ! The "administrative guide" is not worth the paper it is printed on!!
The store has a fixed IP address of 212.9.##.### I connected the camera using ethernet cable. Set the camera up using the software for the camera, with static ip address of 192.168.0.23. Set the SSID of the camera to that of the router (a Netgear one). It worked fine. I went to unplug so I could have it wireless and NOTHING !! It did work one time (no idea what i did differently!) but it would not work over the internet which is what we need it to do! I need the whole thing password protected too!
Is there ANYONE who can help me please??? I am at the point of running away from my work and never returning !!!! :s
Thank you

Hi Jodie,
Thank you for posting. In order to make the camera connect wirelessly, first set up the wireless settings in the camera to match the router. I usually open the router configuration page and copy and paste the SSID and Security Passphrase to the camera to avoid error. The next step is to unplug the ethernet cable and power cord from the camera. Then plug only the power back in and the camera should connect wirelessly.
For remote access to the camera you will need to forward port 80 to the LAN IP address of the camera. (192.168.0.23) This is done in the router. If you need help with port forwarding, you can search the web or call Netgear for assistance.
If you continue to need assistance with the camera, the fastest and easiest way to get assistance is to call Cisco Small Business Support. www.cisco.com/go/sbsc
Please go to www.cisco.com and click on "Register" in the upper right to create a user ID. This will allow our engineers to create a case for you.

I forgot the passcode for restrictions, i read few suggestions here and tried the ibackupbot, but now i cannot find an o my previous backups in itunes

i forgot the passcode for restrictions, i read few suggestions here and tried the ibackupbot, but now i cannot find an o my previous backups in itunes.it keeps saying cannot load sync services. i have reinstalled the latest itunes
please help

but its nothing there, no music, no apps nothing. i had upgraded to iitunes 11 and went back to 10.7 that is when i lost them. apparenty i havent lost contacts, photos.
but i have backed them up previously. i was using ibackupbot and i can see them all there, but i cant install them back to my phone nor to itunes.

BW report authorization for restrict cost center

dear all,
i have problem on BW report authorization for restrict cost center.....when i execute the query, after selection screen, appear error message 'you cannot change zv_cctr for characteristic 0COSTCENTER during query'.
note : zv_cctr is variable restriction for costcenter, type processing = customer exit.
below the customer exit :
WHEN 'ZV_CCTR'.
    IF i_step = 2.
      DATA : gt_mstuidvscc TYPE TABLE OF ztbw_mstuidvscc,
             gs_mstuidvscc TYPE ztbw_mstuidvscc,
             wa_final2(10) TYPE c.
      SELECT * FROM ztbw_mstuidvscc INTO CORRESPONDING FIELDS OF TABLE gt_mstuidvscc
        WHERE userid = 'sy-uname'.
      LOOP AT gt_mstuidvscc INTO gs_mstuidvscc.
        wa_final2 = gs_mstuidvscc-kostl.
        l_s_range-opt = 'EQ'.
        l_s_range-high = wa_final2.
        APPEND l_s_range TO e_t_range.
      ENDLOOP.
    ENDIF.
Regards,
Tony

i defined variable as ready for input and mandatory.
regards,
Tony

My iPhone 5S is using 2.5GBs of storage for the camera roll. I deleted all but 190 photos and this did not change. My other devices cannot backup to iCloud due to the volume on my iPhone. Any ideas?

My iPhone 5S is using 2.5GBs of storage for the camera roll. I deleted all but 190 photos and this did not change. My other devices cannot backup to iCloud due to the volume on my iPhone. Any ideas?

Try turning off the Camera Roll option in Settings>iCloud>Backup & Storage>Manage Storage>Your device. Then turn it back on again.
Cheers,
GB

I would like to use tethering for my camera Nikon D610 in lightroom (version 5.4 is installed). When will lightroom support this camera with tethering?

I would like to use tethering for my camera Nikon D610 in lightroom (version 5.4 is installed). When will lightroom support this camera with tethering?

We'll know when it happens, Lucht - software companies don't make support promises in advance.

Port Forwarding for Cisco camera WVC80N and AirPort Extreme

I have set up my camera to the Apple AirPort Extreme on a Windows 8 computer, but now get an error saying, "The setup wizard cannot set up TZO DDNS with your network for remote viewing." After clicking on the Learn How to Remotely View my Camera, it suggests I need to get Port Fowarding for my router" And iot suggests my router password is incorrect which it is not. Any help for a BEGINNER would be appreciated. I cannot find the IP address for the camera or my computer either.
Cisco support is NO help at all. ANY help would be appreciated. PLEASE MAKE IT SIMPLE. I can set it up on my MAC desktop also if that is better. Thanks so much

gnsmith wrote:
I have a D-Link DCS-920 I would like to view over the internet using my Airport Extreme.
Welcome to Apple's discussion groups.
According to the manual for that device (available here
ftp://ftp.dlink.com/Multimedia/dcs920/Manual/dcs920manual100.zip
you should set the port number that the camera uses to something other than port 80. You'd then use AirPort Utility (the "Advanced" panel, "Port Mapping" tab) to map that TCP port and the camera's "private IP address" to a public TCP port. (I'm not sure what to use for "Service". You might try "Personal Web Sharing". It may also not matter once you chance the port number.) You'll need to know the WAN ("public") IP address of your AirPort Extreme. With that done you should be able to view the camera at that WAN IP address and the declared public port.

I just found an error in the file name for my Camera Raw Cache file. How do I correct it?

I just found an error in the file name for my camera raw cache file. The error is in my username. I don't know how to correct the error or if I should just leave it. I'm not sure where my cache file is stored on my computer. Any help would be appreciated.
Thank you

Since you are on a Mac if when you first set up your account you left out the i in Wilson nothing you do will change that. The REAL account name will always be alicewlson. Once an account is created you can't actually change the name of it. You can change the name that is displayed but not the REAL account name.
Simplest thing to do is stop worrying about it. Everything is as it should be, that is except Wilson being spelled without the i.
Lilac50 wrote:
When I searched finder for "alicewlson" I found a long list of files like this:
2014-07-22 12.50/File005.nef[15:16:35.212] (debug) src/ImageLoader.cpp:363: File: /Users/alicewlson/Recovered/2014-07-22 12.50/File002.nef[15:18:02.173] (debug) src/StoreXMLFile.cpp:21: /Users/alicewlson//.rpro/rpro.cfg
I believe I made the error in my user name when I first got my computer a year ago. I then corrected it under my user name but not in my Lightroom files. I also looked for files with a .lrdata extension and didn't find any.

AP2 new features not available for older cameras

Hi
Can somebody please confirm that older camera's such as Fuji S3 and S2 do not have new raw conversions in the fine tuning adjustments, mine only shows up with the 1.1 or 1.0 options listed, and also the Recovery and Black point sliders are grayed out.
I have no problem with my D2X files, they have the 2.0 conversion options.
Another thing i've noticed is DNG files have an option of 2.0 DNG or 2.0 in the Raw fine tuning box aswell, which one is the right option to choose?
regards
Kiran

Kiran,
Another thing i've noticed is DNG files have an option of 2.0 DNG or 2.0 in the Raw fine tuning box aswell, which one is the right option to choose?
You'd want to choose 2.0 if it's available for your camera. The difference is that this option applies a profile developed to match the specifics of the camera's sensor and image processing firmware. 2.0 DNG applies a generic profile.
Cheers,
Andreas

Stored Procedure for restrict to close documents

Hi,
I want to create a Stored Procedure for restrict to close sales orders for some users, because in Standard Authorizations you have one option to restrict to close, but I need that some users can close quotations and also this users can´t close sales orders. I have this query :
F @object_type='17' AND (@transaction_type='a' or @transaction_type='U' )
BEGIN
IF EXISTS (
SELECT T0.DOCENTRY FROM adoc T0 WHERE T0.[ObjType] = '17'
AND T0.[UserSign] = '1' AND T0.[DocStatus] = 'C' AND
T0.DOCENTRY= @list_of_cols_val_tab_del )
BEGIN
SELECT @Error = 1, @error_message = 'You are not permitted to close Sales Orders'
END
END
But It doesn´t work. I need help!!!
Thanks

Hi Jose,
You have to correct your transaction type parameters. When you perform close or cancel operations on document; the trasnsaction notification receives parameters u201CCu201D for Cancel and u201CLu201D for Close. So instead of checking add u201CAu201D or update u201CUu201D; you have to modify your transaction type filters for cancel u201CCu201D or close u201CLu201D. It will go like belowu2026
IF @object_type='17' AND (@transaction_type='C' or @transaction_type='L')
Please try above and let me know the results.
Thanks & Regards,
Nitin
Manager, SAP Business One
Greytrix
It's time to think outside the box.
Email: sap at greytrix.com | Web: www.greytrix.com
u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Development Partners for SAP B1

Cant install NI-IMAQ for USB Cameras

i tried to install NI-IMAQ for USB Cameras.but it cant get it to install its giving the error need higher version than 7.0 but i am using 8.0 .also it is saying that it needs vision 7.0 ........??wat are these error ..how can i get it install ????????help
thx
Regards

nolsqn,
Can you clarify what you have installed? You must have all of the following installed to get NI IMAQ for USB Cameras to install:
System Requirements:
- Windows 2000/XP (English,
Italian, Japanese, French, Italian, Norwegian, Dutch,
Spanish/Portuguese, Russian, and simple Chinese)
- LabVIEW 7.0 or higher with NI Vision 7.1 or higher for the USB LabVIEW support
- Vision Assistant 7.1 or higher for the USB Vision Assistant plugin module
- Vision Assistant 8.0 or higher for the USB Express VI
It sounds like you are missing Vision Development Module (this is what is referred to as NI Vision)? Is this true?
--Michelle
Instrument Control R&D
National Instruments
Instrument Control
Machine Vision

Payload for restricting Camera

Similar Messages

Maybe you are looking for