Payload not visible in message monitor for BPMN

Hi Folks,
I am doing synchronous call from BPM (NW) and though the call is successful I am not able to see the payload for the syn Re/Response messages. In the old BPM in PI I used to check the new transaction box and I used ot see the message. Is there any similar option in BPMN to view the messages internal to BPMN?

I see the messages in Process Instance view under context Data.

Similar Messages

Payload not visible in cc monitoring for SOAP-RFC synchronous AAE scenario

Hello consultants,
I have a synchronous SOAP-RFC scenario over the AAE (Java only). When I test the service in WSNAVIGATOR the response message contains an error that results in the error message:
"<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>ADAPTER.JAVA_EXCEPTION</code>
 <text><![CDATA[
java.io.IOException: Parsing Error: org.xml.sax.SAXParseException: The processing instruction target matching "[xX][mM][lL]" is not allowed." the same errror is present in communication channel monitoring for the SOAP adapter.
The status in message monitoring however is succesful.
Is it possible to check the payload for the response message of the RFC call. In CC monitoring I cannot access the payload, it is not there. It does not have to be in cc monitoring, anywhere would be fine.
Since this is an AAE scenario there are no messages in SXMB_MONI.
All tips are appreciated.
Peter Jonker

Hello!
Please set the "messaging.syncMessageRemover.removeBody" parameter to "false", on the SAP XI AF Messaging Service. Use the help page below for more information.
Properties Related to the Messaging System:
http://help.sap.com/saphelp_nw04s/helpdata/EN/59/25ee41c334c717e10000000a155106/frameset.htm
Best regards,
Lucas Santos

Message 2100 not found; No message file for product=RDBMS, facility=UL

Hi,
I am trying to run sqlldr. But I got this message:
Message 2100 not found; No message file for product=RDBMS, facility=UL;
I checked my ORACLE_HOME and it is set to: C:\oraclexe\app\oracle\product\10.2.0\server which includes the folders BIN,RDBMS, ....
I checked my C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS and there is no ORAUS.MSG inside the folder. If this is the solution where can I find this file? I read in the forums to copy it from the server directory to the client, but I couldn't find it anywhere on my machine.
Thanks,
M

Thansk, I really appreciate your help. This is the result:
AGSDESKTOPJAVA=C:\Program Files (x86)\ArcGIS\Desktop10.0\
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Matt\AppData\Roaming
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=Smith
ComSpec=C:\Windows\system32\cmd.exe
DEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Matt
JAVA_HOME=C:\Program Files\Java\jdk1.6.0_23
LOCALAPPDATA=C:\Users\Matt\AppData\Local
LOGONSERVER=\\Smith
NUMBER_OF_PROCESSORS=2
ORACLE_BASE=C:\oraclexe\app\oracle
ORACLE_HOME=C:\oraclexe\app\oracle\product\10.2.0\server
ORA_NLS=C:\oraclexe\app\oracle\product\10.2.0\server\nls
OS=Windows_NT
Path=C:\XEClient\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Windows
\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerSh
ell\v1.0\;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\MATLAB\R
2010a\runtime\win64;C:\MATLAB\R2010a\bin;C:\Program Files (x86)\Common Files\Rox
io Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\10.0\DLLSh
ared\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 15 Model 6 Stepping 2, GenuineIntel
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=0602
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
RoxioCentral=C:\Program Files (x86)\Common Files\Roxio Shared\10.0\Roxio Central
36\
SESSIONNAME=Console
SQLPATH=C:\XEClient\sqlplus
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\Matt\AppData\Local\Temp
TMP=C:\Users\Matt\AppData\Local\Temp
USERDOMAIN=Smith
USERNAME=Matt
USERPROFILE=C:\Users\Matt
VS100COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\Tools
VS90COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\Tools\
VSEDEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
windir=C:\Windows

Message 2100 not found; No message file for product=RDBMS, facility=ULMessa

hi all,
I am using windows2000 and 10g i am running loader using java
but getting a message like
Message 2100 not found; No message file for product=RDBMS, facility=ULMessage
I have checked oracle_home and path in my env setting. but no progress same message i am getting
but its running fine using cmd prompt.
please help
thanks in advance.

First 10g is not a version it is a marketing label. What is the version number (to 3 decimal places).
Second can you expand your question to explain you this has to do with AQ? How are enqueued, what code is executing to dequeue? We can make guesses but they may have nothing to do with your actual environment.

TNS-12560: Message 12560 not found; No message file for product=NETWORK

I have downloaded and installed the SQL *Plus client software from the URL http://www.oracle.com/technology/tech/sql_plus/index.html
This should help me connect to the Oracle database
Following is the error I have in the sqlnet.log file (located at C:\oracle\product\10.2.0\client_1\BIN)
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleORCL)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=C:\oracle\product\10.2.0\client_1\BIN\sqlplus.exe)(HOST=PEM270639IC)(USER=mattut))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 10-SEP-2007 10:45:13
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: Message 12560 not found; No message file for product=NETWORK, facility=TNS
ns secondary err code: 0
nt main err code: 530
TNS-00530: Message 530 not found; No message file for product=NETWORK, facility=TNS
nt secondary err code: 126
nt OS err code: 0

Where are you trying to connect to?
If you want a local database you must down and install for example the Oracle 10 Express

ORA-01034: Message 1034 not found; No message file for product=RDBMS

Hi!
After creating a RAC Database (10.2.0.5) on Redhat Enterprise Linux 64-bit, we checked: Listeners, Processes and Environment variables.
Everything was set up properly and running.
When trying to connect as sysdba the following message appeared:
$sqlplus / as sysdba
sql>select * from v$instance;
select * from v$instance
ERROR at line 1:
ORA-01034: Message 1034 not found; No message file for product=RDBMS,
facility=ORA
A shutdown and startup did not help.
What could be the issue here?
Thanks!

Here is an excerpt of the alert log. No ora-
ALTER DATABASE OPEN
Picked broadcast on commit scheme to generate SCNs
Fri Feb 24 11:26:50 CET 2012
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=32, OS id=4930
Fri Feb 24 11:26:50 CET 2012
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=33, OS id=4932
Fri Feb 24 11:26:50 CET 2012
SUCCESS: diskgroup LOG01 was mounted
SUCCESS: diskgroup LOG02 was mounted
Thread 1 opened at log sequence 10
Current log# 11 seq# 10 mem# 0: +LOG01/omdemo/onlinelog/group_11.265.776085353
Current log# 11 seq# 10 mem# 1: +LOG02/omdemo/onlinelog/group_11.265.776085353
Successful open of redo thread 1
Fri Feb 24 11:26:50 CET 2012
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Fri Feb 24 11:26:50 CET 2012
ARC1: Becoming the heartbeat ARCH
Fri Feb 24 11:26:50 CET 2012
SMON: enabling cache recovery
Fri Feb 24 11:26:50 CET 2012
Successfully onlined Undo Tablespace 1.
Fri Feb 24 11:26:50 CET 2012
SMON: enabling tx recovery
Fri Feb 24 11:26:50 CET 2012
Database Characterset is WE8MSWIN1252
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=34, OS id=4934
Fri Feb 24 11:26:52 CET 2012
Completed: ALTER DATABASE OPEN
Sat Feb 25 02:00:23 CET 2012
Thread 1 advanced to log sequence 11 (LGWR switch)
Current log# 12 seq# 11 mem# 0: +LOG01/omdemo/onlinelog/group_12.266.776085355
Current log# 12 seq# 11 mem# 1: +LOG02/omdemo/onlinelog/group_12.266.776085355$ps -ef|grep mon
oracle    4694     1 0 Feb24 ?        00:00:10 /oracle/app/oracle/product/10.2.0/db_1/bin/racgimon startd OMDEMO
oracle    4773     1 0 Feb24 ?        00:00:04 ora_pmon_OMDEMO1
oracle    4779     1 0 Feb24 ?        00:00:03 ora_lmon_OMDEMO1
oracle    4819     1 0 Feb24 ?        00:00:05 ora_smon_OMDEMO1
oracle    4825     1 0 Feb24 ?        00:00:00 ora_mmon_OMDEMO1
root     10429     1 0 Jan24 ?        03:29:11 /oracle/app/grid/11.2.0/grid/bin/osysmond.bin
root     10475     1 0 Jan24 ?        00:01:44 /oracle/app/grid/11.2.0/grid/bin/cssdmonitor
grid     11214     1 0 Jan24 ?        00:00:46 asm_pmon_+ASM1
grid     11301     1 0 Jan24 ?        00:00:19 asm_lmon_+ASM1
grid     11335     1 0 Jan24 ?        00:00:00 asm_smon_+ASM1
grid     11343     1 0 Jan24 ?        00:00:00 asm_gmon_+ASM1
grid     11347     1 0 Jan24 ?        00:00:00 asm_mmon_+ASM1
dbus     11972     1 0 Jan17 ?        00:00:03 dbus-daemon --system
xfs      14493     1 0 Jan17 ?        00:00:00 xfs -droppriv -daemon
avahi    14594     1 0 Jan17 ?        00:00:00 avahi-daemon: running [at1srv0080.local]
avahi    14595 14594 0 Jan17 ?        00:00:00 avahi-daemon: chroot helper
root     14671     1 0 Jan17 ?        00:00:00 /usr/sbin/gdm-binary -nodaemon
root     14736 14671 0 Jan17 ?        00:00:00 /usr/sbin/gdm-binary -nodaemon
oracle   17059 12052 0 10:42 pts/1    00:00:00 grep mon
[oracle@at1srv0080 /]$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.5.0 - Production on Mon Feb 27 10:46:51 2012
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/oracle/app/oracle/product/10.2.0/db_1/dbs/initOCTA1.ora'

Payload not visible in the XI monitor

In my scenario an xml message was successfully reaching its destination. The XI system was upgraded from support pack 13 to support pack 16. After that the process is still working fine as the XML message is still successfully reaching its destination. The issue we have is that the Payload is not visible in the last two steps of the monitor. We can see the Payload until Technical Routing in the monitor. But Call Adapter and Response steps do not have payload.
(TCode: SXMB_MONI)
when we double click a message we get XML message details and on the left hand side it shows following hierarchy:
XML Message:
Receiver Grouping
 - SOAP Header
 - SOAP Body
 - Payloads
Request Message Mapping
 - SOAP Header
 - SOAP Body
 - Payloads
Technical Routing
 - SOAP Header
 - SOAP Body
 - Payloads
Call Adapter
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Response
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Any suggestions would be highly appreciated!
Thanks in advance.
Faiq

Hi faiq
This seems to be the normal behaviour starting with SP13 or 14. There was a discussion about this a while ago and I believe it turned out to be works as designed.
This is what was posted as final conclusion in Re: SXMB_MONI does not show payload after upgrade to SP15:
According to SAP (OSS) this is working as designed. Apparently it was an error in the past that the payload was stored in the DB on the ABAP (IE) side when the AE is involved, as it would then be stored twice at DB level. This explains why this is not a problem when e.g. the IDOC adapter is used.
Anyway, the only way to let the system show the payload in SXI_MONITOR is to set the runtime trace level to 3 (full trace) and parameter logging to 1 (trace switched on).
regards,
Peter

SOAP to RFC : Message visible in Message Monitoring , but not in SXMB_MONI

Hi Experts,
I'm doing a SOAP to BAPI scenario. The interface is a SYNCHRONOUS one . I'm using XML SPY as the soap client to test the interface. Even though i don't have the test for the BAPI after sending an empty request message i'm able to receive an empty response from the BAPI. I'm also able to see the message send in message monitoring .
But when i go inside SXMB_MONI its acting in a strange way . I'm not able to see the any of the messages. Any ideas??
Thanks & Regards,
Rahul.

Hi Rahul,
Synchronous messages are not persisted on the Integration server unless logging is switched on in SXMB_ADM Tcode(Specific Configuration->RUNTIME(Category)->LOGGING_SYNC(Parameters)).
That's the reason you couldn't find SYNCHRONOUS message in SXMB_MONI.
Thanks,
Jag

No authorization to view payload in auditLog Of Message Monitoring in RWB

Hello,
I am not able to view the message payload in the audit Log In Message Monitoring in RWB.
It says no authorization.
Can anybody tell me what authorization object is required for this?
Thanks,
Loveena

Hello,
Check the link below:
community/pi-and-soa-middleware/blog/2008/02/07/display-adapter-synchronous-message-content-in-rwb-of-pi-71
The configuration consist to set a parameter on NWA. Check the following step:
1. Go to <host>:<port>/nwa;
2. Go to Configuration Management and then Infrastructure;
3. Java System Properties;
4. Click on services tab and then search for XPI Service: Messaging System;
5. Search for messaging.syncMessageRemover.removeBody on parameters tab and modify from true to false. False value should be displayed in the custom value column.
After that, you'll be able to see the payload in RWB.
Regards,
Arthur Silva

Message Monitoring for each within the BPM process

I have a question concerning message monitoring within a BPM process. I receive an IDOC into my BPM process. I then have three transformation steps before sending an E-mail to the end receiver. When I look at the messages in the workflow log, I am unable to see the message after each transformation step. In the log display if I click the instance ID for all steps except the first step I am unable to see a message.
List of Message Objects
Object Type              Instance    ID                          Creation Time
ZXI_PROXY...0001     DC9F66530C7899F1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C789FF1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C78A5F1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C78B1F1AC430017A44943B2     11:04:39
ZXI_PROXY...0001     DC9F66530C78ABF1AC430017A44943B2      11:04:39
ZXI_PROXY...0001     DC9F614BA98C51F1AC430017A44943B2      10:28:40
If I click all except the first instance I receive the following message:
No messages available for selection
Message no. XMS_ADM113
Is there a way to make the message persistent after each step within the process? I would like to see the data after each step in the workflow log. Is this possible?
I do receive the e-mail from the send step so I know that it's completing the process. What I'm not sure of is if each step individually processed the data as I expected.

Hi Audra,
Check this link
BPM monitoring
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Sachin

Outbound payload not visible in sxmb_moni

Hello Guru's,
I have a issue in message monitoring (sxmb_moni). I can't see the outbound payload for the most interfaces.
Do I have to set a parameter somewhere? Does anyone has any suggestion?
Kind regards,
Kamran

Hi people,
Thank you for your replies.
Im going to set those parameters to 1 cuz in our system it had a value of 0.
This goes for all of the messages synchronous and asynchronous. Is there a difference between if we have a asynchronous interface?
Kind regards
Kamran

Not receiving automated messages correctly for Droid

Is there a current problem with Droid not receiving automated messages correctly from short 5 digits numbers for example my dentist office sends out reminders for my appointments and they are not sending correctly I have included an example below of what it looks like below. You will see that there no message. I have put the message below of what I should have received from my dentist. So you can understand why people are confused and calling our office back wondering when there appointment is . (Yes, I work at the office and a patient
[10] 11 (Thu). Thanks! {edited for privacy}
Sammie, Reply with "YES" to confirm your appt at 10:00AM on 3/24/11 (Thurs). Thanks! {edited for privacy}
Is this something that can be fixed. Becasue I know that majority of ourpatients have Droids has it is a very popular phone and we are getting numerous complaints!
I will be looking forwrd to a response!

Well what's also weird is I'll send/receive other sms messages and there won't be any problems. But then, out of no where, my phone will get sms messages that are a few days old. I move around plenty in my area for work or other reasons so it's not like I stay in one location all the time. Also, I have Verizon and they have great coverage in my area anyway.

Radio button not display in message monitoring(RWB)

I show Message Monitoring in runtime workbench.
I found many entry in 'Configure Table Columns' area.
But first column's radio buttons are not displaied.
I need to show radio button.
thanks.

hi,
this problem might due to your jdk version installed chk whether it is 1.4.2.x if it is more than it den re install the above mentioned version since dat does support n bcoz of which the radio buttons are not being shown.
Regards.
Siddhesh Naik

I have just rented two movies and after download they are not visible anywhere in iTunes for me to watch.

I have just rented two movies and after download they are not visible anywhere for me to view. Usually in the iTunes menu there is an option call 'rentals' where rented movies sit until they expire, this is no longer visible. The movie files are listed in the finder under music/movies.... With the rest of my iTunes data, but they will not play in iTunes from there and I can't add them to my library for watching.
The only thing I am currently doing differently is that I have just subscribed to iTunes Match; would this affect my rentals?

Hi Cmcb,
Under your Library list, you should see "Movies". Click on that, and you will see a screen with several tabs at the top - Rentals, Unwatched, Movies, Genres, Home Videos, etc.
As Hackintosh indicated above, click on the Rentals tab, and your movies will be displayed there. Doulbe click on one to start playing it.
If you do not have your sidebar showing, go up to View at the top, and click on Show Sidebar. Then you will see your Library lists on the sidebar, which will include Movies.
Cheers,
GB

SXMB_MONI_BPE - Message Payload not visible in container

I have a message that is failing a mapping within an Integration Process. This is an Async process end-to-end. I have trace_level set to 3, and logging/logging_propagation/logging/sync set to 1.
I view the failed workflow in SXMB_MONI_BPE/list with technical details and see the mapping step that errored. I click this and look under "container". I then drill down to messages and see 1 message going into the mapping. Under this there is some Header information but NO Payload. How can I get this to appear here? Ideally I'd like this to be logged only for error'd workflows.
The mapping exception also does not get propagated back up to sxmb_moni level so the only way to see it is in the alert that's raised/inbox, the defaultTrace or sxmb_moni_bpe. Is there a way to do this (I seem to recall I couldnt do this in XI 3.0/14)? I'm using XI 7.0/12. I do not want a custom alert, just the standard text like you see in the mapping test tool (xxx cannot be produced due to yyy).
Thanks,
James.

Yep, have done that, but 2 issues:
Firstly, it doesnt help ongoing supportability where seeing why a message failed through quick and simple tools like sxmb_moni is quite important.
Secondly because of other dependancies in predecessor steps, I have to do a bit of fiddling around to test it. Not helped by the fact that the Message Mapping test tool doesnt seem to want to show me the xml it produces from a previous mapping (It shows the grid ok, but not the xml !! ) so actually I can only semi-guess the data passed to the map. Hence why I originally wanted to see the message that was passed in the container variable of sxmb_moni_bpe.
Cheers
James.

Payload not visible in message monitor for BPMN

Similar Messages

Maybe you are looking for