Getting errors when creating physical standby.
Hello All,
i am getting following error when i creating a physical standby for production,
i used below command to do it
duplicate target database to standby dorecover;
after some time it throwed this error.
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '+DATA/solfho2/datafile/system.382.764328493'
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/12/2011 13:04:06
RMAN-03015: error occurred in stored script Memory Script
RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/arch/SOLFHO2/PROLHO01_1_25224_740461103.arc'
ORA-16145: archival for thread# 1 sequence# 25224 in progress
Hello;
Looks like a do over.
I have my short notes here:
http://www.visi.com/~mseberg/duprman2.html
This has been tested several times.
Best Regards
mseberg
Similar Messages
-
Error while creating physical standby database using Oracle Grid 10.2.0.5
Hi All,
I am setting up data guard using oracle grid.
Primary database version: - 10.2.0.4
Standby database version: - 10.2.0.4
Primary OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
Standby OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
I am creating physical standby database using EM. But it is getting failed with error message in sqlnet.ora file
Fatal NI connect error 12533, connecting to:
(DESCRIPTION=(ADDRESS_LIST=)(CONNECT_DATA=(SERVICE_NAME=INPRDSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=indb50.oii.com)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.4.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 17-AUG-2010 02:40:07
Tracing not turned on.
Tns error struct:
ns main err code: 12533
TNS-12533: TNS:illegal ADDRESS parameters
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0As we can see, address_list is empty.
Can anyone suggest what could be the reason behind this?Dear user13295317,
Here is the error explanation;
Oracle Error :: TNS-12533
TNS:illegal ADDRESS parameters
Cause
An illegal set of protocol adapter parameters was specified.
In some cases, this error is returned when a connection cannot be made to the protocol transport.
Action
Verify that the destination can be reached using the specified protocol.
Check the parameters within the ADDRESS section of TNSNAMES.ORA.
Legal ADDRESS parameter formats may be found in the Oracle operating system specific documentation for your platform.
Protocols that resolve names at the transport layer (such as DECnet object names) are vulnerable to this error if not properly configured or names are misspelled.Hope That Helps.
Ogan -
Problem in identifying control file when creating physical standby
hi there,
(database version: 10.2.0.4
plateform linux)
I'm using the command as below to create physical standby database from backup:
rman target / auxiliary sys/tiger@paceview
Recovery Manager: Release 10.2.0.4.0 - Production on Tue Sep 4 18:05:53 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: PACEVIEW (DBID=2092349485)
connected to auxiliary database: PACEVIEW (not mounted)
run {
allocate auxiliary channel c1 device type DISK;
set until sequence 38;
duplicate target database for standby dorecover nofilenamecheck;
released channel: ORA_DISK_1
allocated channel: c1
channel c1: sid=35 devtype=DISK
allocated channel: c2
channel c2: sid=36 devtype=DISK
executing command: SET until clause
Starting Duplicate Db at 04-SEP-12
contents of Memory Script:
set until scn 138180211934;
restore clone standby controlfile;
sql clone 'alter database mount standby database';
executing Memory Script
executing command: SET until clause
Starting restore at 04-SEP-12
channel c1: restoring control file
ORA-19625: error identifying file /backup/rman/paceview/DEL1_standby.ctl
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-19600: input file is control file (/backup/rman/paceview/DEL1_standby.ctl)
ORA-19601: output file is control file (/PGHProdDB/oradata/paceview/control1.ctl)
failover to previous backup
released channel: c1
released channel: c2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/04/2012 18:01:44
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restorei have already tried crosscheck but still giving same error
thanksHello;
So this is what I would do :
Backup Primary ( change to your directory as need )
RMAN RUN {
allocate channel d1 type disk;
backup format '/u01/backups/PRIMARY/df_t%t_s%s_p%p' database;
sql 'alter system archive log current';
backup format '/u01/backups/PRIMARY/al_t%t_s%s_p%p' archivelog all;
backup current controlfile for standby format '/u01/backups/PRIMARY/sb_t%t_s%s_p%p';
release channel d1;
}Move the backup and duplicate like this :
rman target sys/password@PRIMARY auxiliary /
RMAN> run {
allocate channel C1 device type disk;
allocate auxiliary channel C2 device type disk;
duplicate target database for standby nofilenamecheck;
}For complete details of this method see :
http://www.visi.com/~mseberg/duprman2.html
Best Regards
mseberg -
Getting Error when creating Data Model off OBIEE Analysis
Hi,
Our BI Publisher is integrated with OBIEE. I am developing BI Publisher report from existing obiee analysis. I am getting error when selecting existing analysis for data Set. Following error gets appear when pressing ok after selecting BI analysis
oracle.xdo.XDOException: oracle.xdo.XDOException: oracle.xml.parser.v2.XMLParseException: '=' missing in attribute.
I have done some debugging and it seems error is appearing due to presence of dimensional hierarchy in the analysis. If I remove dimensional hierarchy column from the analysis, this error goes away and I am able to save data model and gather sample XML.
Any idea how to handle dimensional hierarchy column in BI Publisher data set?
Thanks & RegardsHi,
I got this response from Oracle
“Sorry, this is not supported. If the BIEE Analysis has hierarchy columns then BIP cannot use it as a datasource.” -
User getting error when creating a new Document Library
The user is getting the following error when trying to create a new Document Library in SharePoint 2010:
Error
Cannot complete this action.
Please try again.
Correlation ID: 37ecd5eb-6129-4fa3-84bd-c6f0ad8115d5
Has anyone come across this error and know how to resolve it?Hi,
According to your post, my understanding is that the user could not create a document library.
To narrow down whether the issue is related to the user permission, you can check which permission the user has.
You can also assign the user full control to check whether it works.
What’s more, did the issue occur in other sites? You can check with other sites or create a new site to check whether it works. Maybe the site has been corrupted.
To quickly and accurately find the issue, I recommend you can check the event log and ULS log to see if anything unexpected occurred.
For SharePoint 2010, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Getting error when creating a RFQ in MM module" create rfq item overview"
Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue.
This error i am getting when creating a RFQ in MM module and when trying to save the screen "create rfq item overview" then it gives me a pop up box message " SAP SYSTEM MANAGER: WORK PROCESS RESTARTED, SESSION TERMINATED".
Here are the details of teh system
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors SYSTEM_CORE_DUMPED
Occurred on 01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.Hi Mudessir,
With the help of ABAP'er try the following.
1. open the program 'LCLSCF2G' from SE38.
2. Keep a break point at line no: 131.
There is 'END SELECT' statement which is getting failed at line no 131 in the program.
Try to analyse the SY-SUBRC at that point.
If your technical consultant can't solve this, write to SAP OSS (service.sap.com).
I have searched SAP OSS, there are other situations, but your case is not there. So write to SAP if technical consultant can't solve it by debugging the program.
Regards,
Madhu. -
Getting errors while creating a Standby database
Hi,
I have Oracle 9.0.2 installed on windows xp machine , the sid of the database is oradata. Now i am trying to create a standby database on same machine and the sid of the database is oratest. i have followed the required steps.
a. Firstly i have configured the required parameters in the init.ora parameters of standby database
b. Secondly , i created the standby control file on primary database.
c. while mounting the standby database i am getting the following error.
Database name "ORADATA" its should be "ORATEST"
Could you please help me in resolving this issue? and also if possible. please jot down the procedure for creating the standby database.
Thanks
Vj0011590Hi,
I have Oracle 9.0.2 installed on windows xp machine ,
the sid of the database is oradata. Now i am trying
to create a standby database on same machine and the
sid of the database is oratest. i have followed the
required steps.
a. Firstly i have configured the required parameters
in the init.ora parameters of standby database
b. Secondly , i created the standby control file on
primary database.
c. while mounting the standby database i am getting
the following error.
Database name "ORADATA" its should be "ORATEST"I didn't see you copy the cold backup db from primary to standby.
and the error is coming from init.ora in your standby db. check it again. -
Getting error when creat sales order and Stock Posting
Hi
I have created enterprise structure, xd01, mm01, ovkk but I count't post stock.
When create sales order getting error is that
1.This material is not defined for sales area 1000, 10, 00.
And if i use this T.Code MB1C,
2. Parameters for plant 1000 not maintained in Inventory Mgt.,
*3. Unit *** is not created in language EN.*
Thanks in advanceDear selvi sankaran
1) Compare the sales organization, distribution channel and division of customer and material. In your case, either of that should have been created differently. Maintain the same sales area and retry
2) Go to omi8 and maintain the required parameters to your plant
3) Go to Material Master, select "Additional data" and click on "Descriptions". There maintain "EN" under language.
thanks
G. Lakshmipathi -
Error - when creating a standby database with EM 10g Grid Control
Hi,
I am experiencing some problems when I want to create through the EM 10g Grid Control a standby database from a allready existing db. At step 2 when the files should be generated and copied to the other system, I am always getting the error that there isn't enough disk space on the other system. This can't be because there is at least 30GB free and the installer is asking for less than 1GB. I was searching the whole internet for a solution to this issue, but there was just nothing that could help me out with that point...
Has someone an idea at this point? Thanks for helping...
I am working on a Windows 2003 Server - Enterprise Edition for every system (Grid Control, Primary DB and Standby DB).
Best regards,
Patrick.Check that filesystem space using GC under targets>hosts on which you are trying to create standby. Do you have any specific error message from GC ? If GC shows proper size under host filesystem section then there shuld be no such problem. Double chk ur locations too.
Regards,
http://askyogesh.com -
Hi
I am on Jdev 11.1.2.4.0 Build JDEVADF_11.1.2.4.0_GENERIC_130421.1600.6436.1
When I am trying to create Web Services Data Control for SOAP, it gives 'Invalid WSDL File' for any WSDL file and shows following error:
oracle/adfdtinternal/model/adapter/webservice/utils/WSUtils$DefaultAuthPrompter
and in 'feedback' tab:
Already logged bug for [NoClassDefFoundError in o.j.webservices.wsdl.CachedWSDLReader:394]
Also if I try to create a new Request in HTTPAnalyzer and give a WSDL it shows following exception:
java.io.IOException: java.lang.NoClassDefFoundError: oracle/jdeveloper/webservices/wsdl/CachedWSDLReader$SimpleAuthPrompt
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:228)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:132)
at oracle.jdevimpl.webservices.tcpmonitor.editor.WSDLChooserDialog$2.run(WSDLChooserDialog.java:398)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.NoClassDefFoundError: oracle/jdeveloper/webservices/wsdl/CachedWSDLReader$SimpleAuthPrompt
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getNewReaderInstance(CachedWSDLReader.java:394)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$1.initialValue(CachedWSDLReader.java:298)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$1.initialValue(CachedWSDLReader.java:294)
at java.lang.ThreadLocal.setInitialValue(ThreadLocal.java:141)
at java.lang.ThreadLocal.get(ThreadLocal.java:131)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getReaderImpl(CachedWSDLReader.java:308)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLInternal(CachedWSDLReader.java:531)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLDirect(CachedWSDLReader.java:471)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator$FetchModelTask.call(MddsLocator.java:264)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator$FetchModelTask.call(MddsLocator.java:237)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:212)
... 4 more
followed by "The string <WSDL URL> is not a valid WSDL".
If I try to create a REST WS Datacontrol, it shows error:
NoClassDefFoundError in o.adf.model.connection.url.HttpUrlConnection:146
Entire stack trace is attached.
Please let me know if these are known issues and if there is any workaround.
ThanksDon't see any way to attach file. So here is the entire trace:
Performing action (299) New... [ from FrameworkXmlEditor ] [ for ( adfmf-application.xml, <none>, ADFApp1.jws ) ]
Performing action (299) New... [ from ProjectNavigatorWindow ] [ for ( <none>, ViewController.jpr, ADFApp1.jws ) ]
Performing action (1046) Create New Request [ from HistoryDockable ] [ for ( <none>, ViewController.jpr, ADFApp1.jws ) ]
oracle.jdevimpl.webservices.tcpmonitor.editor:Jun 3, 2013 4:46:51 PM oracle.jdevimpl.webservices.tcpmonitor.editor.WSDLChooserDialog$2 validateWSDL
WARNING: A problem has been found building the mdds model
java.io.IOException: java.lang.NoClassDefFoundError: HTTPClient/AuthorizationPrompter
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:228)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:132)
at oracle.jdevimpl.webservices.tcpmonitor.editor.WSDLChooserDialog$2.run(WSDLChooserDialog.java:398)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.NoClassDefFoundError: HTTPClient/AuthorizationPrompter
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:631)
at java.lang.ClassLoader.defineClass(ClassLoader.java:615)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.defineClass(DefaultClassLoader.java:188)
at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.defineClass(ClasspathManager.java:580)
at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findClassImpl(ClasspathManager.java:550)
at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClassImpl(ClasspathManager.java:481)
at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass_LockClassLoader(ClasspathManager.java:469)
at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java:449)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoader.java:216)
at org.eclipse.osgi.internal.loader.BundleLoader.findLocalClass(BundleLoader.java:393)
at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:469)
at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:422)
at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:410)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:107)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getNewReaderInstance(CachedWSDLReader.java:394)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$1.initialValue(CachedWSDLReader.java:298)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$1.initialValue(CachedWSDLReader.java:294)
at java.lang.ThreadLocal.setInitialValue(ThreadLocal.java:141)
at java.lang.ThreadLocal.get(ThreadLocal.java:131)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getReaderImpl(CachedWSDLReader.java:308)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLInternal(CachedWSDLReader.java:531)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLDirect(CachedWSDLReader.java:471)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator$FetchModelTask.call(MddsLocator.java:264)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator$FetchModelTask.call(MddsLocator.java:237)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:212)
... 4 more
Caused by: java.lang.ClassNotFoundException: HTTPClient.AuthorizationPrompter
at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:506)
at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:422)
at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:410)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:107)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
... 31 more
oracle.jdevimpl.webservices.tcpmonitor.editor:Jun 3, 2013 4:47:52 PM oracle.jdevimpl.webservices.tcpmonitor.editor.WSDLChooserDialog$2 validateWSDL
WARNING: A problem has been found building the mdds model
java.io.IOException: java.lang.NoClassDefFoundError: oracle/jdeveloper/webservices/wsdl/CachedWSDLReader$SimpleAuthPrompt
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:228)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:132)
at oracle.jdevimpl.webservices.tcpmonitor.editor.WSDLChooserDialog$2.run(WSDLChooserDialog.java:398)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.NoClassDefFoundError: oracle/jdeveloper/webservices/wsdl/CachedWSDLReader$SimpleAuthPrompt
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getNewReaderInstance(CachedWSDLReader.java:394)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$1.initialValue(CachedWSDLReader.java:298)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$1.initialValue(CachedWSDLReader.java:294)
at java.lang.ThreadLocal.setInitialValue(ThreadLocal.java:141)
at java.lang.ThreadLocal.get(ThreadLocal.java:131)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getReaderImpl(CachedWSDLReader.java:308)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLInternal(CachedWSDLReader.java:531)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLDirect(CachedWSDLReader.java:471)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator$FetchModelTask.call(MddsLocator.java:264)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator$FetchModelTask.call(MddsLocator.java:237)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:212)
... 4 more
Performing action (13) Save All [ from SOAPMessageEditor ] [ for ( HTTP Analyzer : Unsent Message, <none>, <none> ) ]
Invoking command: [ from SOAPMessageEditor ] [ for ( HTTP Analyzer : Unsent Message, <none>, <none> ) ]
Performing action (388) JDeveloper Forum [ from FrameworkXmlEditor ] [ for ( adfmf-application.xml, <none>, ADFApp1.jws ) ]
Performing action (388) JDeveloper Forum [ from FrameworkXmlEditor ] [ for ( adfmf-application.xml, <none>, ADFApp1.jws ) ]
Performing action (79) About [ from FrameworkXmlEditor ] [ for ( adfmf-application.xml, <none>, ADFApp1.jws ) ]
Invoking command: [ from FrameworkXmlEditor ] [ for ( adfmf-application.xml, <none>, ADFApp1.jws ) ]
Performing action (299) New... [ from FrameworkXmlEditor ] [ for ( adfmf-application.xml, <none>, ADFApp1.jws ) ]
Performing action (299) New... [ from ProjectNavigatorWindow ] [ for ( ViewController.jpr, ViewController.jpr, ADFApp1.jws ) ]
Performing action (299) New... [ from ProjectNavigatorWindow ] [ for ( ViewController.jpr, ViewController.jpr, ADFApp1.jws ) ]
Performing action (279) Clear [ from MessagePage ] [ for ( <none>, ViewController.jpr, ADFApp1.jws ) ]
Performing action (9) Open... [ from MessagePage ] [ for ( <none>, ViewController.jpr, ADFApp1.jws ) ]
Performing action (299) New... [ from FrameworkXmlEditor ] [ for ( adfmf-application.xml, <none>, ADFApp1.jws ) ]
Performing action (299) New... [ from ProjectNavigatorWindow ] [ for ( ViewController.jpr, ViewController.jpr, ADFApp1.jws ) ]
Performing action (455) HTTP Analyzer [ from HistoryDockable ] [ for ( <none>, ViewController.jpr, ADFApp1.jws ) ]
Performing action (1046) Create New Request [ from HistoryDockable ] [ for ( <none>, ViewController.jpr, ADFApp1.jws ) ]
oracle.jdevimpl.webservices.tcpmonitor.editor:Jun 3, 2013 5:02:23 PM oracle.jdevimpl.webservices.tcpmonitor.editor.WSDLChooserDialog$2 validateWSDL
WARNING: A problem has been found building the mdds model
java.io.IOException: java.lang.NoClassDefFoundError: oracle/jdeveloper/webservices/wsdl/CachedWSDLReader$SimpleAuthPrompt
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:228)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:132)
at oracle.jdevimpl.webservices.tcpmonitor.editor.WSDLChooserDialog$2.run(WSDLChooserDialog.java:398)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.NoClassDefFoundError: oracle/jdeveloper/webservices/wsdl/CachedWSDLReader$SimpleAuthPrompt
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getNewReaderInstance(CachedWSDLReader.java:394)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$1.initialValue(CachedWSDLReader.java:298)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$1.initialValue(CachedWSDLReader.java:294)
at java.lang.ThreadLocal.setInitialValue(ThreadLocal.java:141)
at java.lang.ThreadLocal.get(ThreadLocal.java:131)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getReaderImpl(CachedWSDLReader.java:308)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLInternal(CachedWSDLReader.java:531)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLDirect(CachedWSDLReader.java:471)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator$FetchModelTask.call(MddsLocator.java:264)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator$FetchModelTask.call(MddsLocator.java:237)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:212)
... 4 more
oracle.jdevimpl.webservices.tcpmonitor.editor:Jun 3, 2013 5:03:39 PM oracle.jdevimpl.webservices.tcpmonitor.editor.WSDLChooserDialog$2 validateWSDL
WARNING: A problem has been found building the mdds model
java.io.IOException: java.lang.NoClassDefFoundError: oracle/jdeveloper/webservices/wsdl/CachedWSDLReader$SimpleAuthPrompt
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:228)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:132)
at oracle.jdevimpl.webservices.tcpmonitor.editor.WSDLChooserDialog$2.run(WSDLChooserDialog.java:398)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.NoClassDefFoundError: oracle/jdeveloper/webservices/wsdl/CachedWSDLReader$SimpleAuthPrompt
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getNewReaderInstance(CachedWSDLReader.java:394)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$1.initialValue(CachedWSDLReader.java:298)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$1.initialValue(CachedWSDLReader.java:294)
at java.lang.ThreadLocal.setInitialValue(ThreadLocal.java:141)
at java.lang.ThreadLocal.get(ThreadLocal.java:131)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getReaderImpl(CachedWSDLReader.java:308)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLInternal(CachedWSDLReader.java:531)
at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLDirect(CachedWSDLReader.java:471)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator$FetchModelTask.call(MddsLocator.java:264)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator$FetchModelTask.call(MddsLocator.java:237)
at oracle.jdevimpl.webservices.tcpmonitor.editor.MddsLocator.getModel(MddsLocator.java:212)
... 4 more
Performing action (299) New... [ from ProjectNavigatorWindow ] [ for ( ViewController.jpr, ViewController.jpr, ADFApp1.jws ) ]
java.lang.NoClassDefFoundError: HTTPClient/HTTPConnection
java.lang.NoClassDefFoundError: HTTPClient/HTTPConnection
o.adf.model.connection.url.HttpURLConnection.<init>(HttpURLConnection.java:146)
o.adf.model.connection.url.URLProviderFactory.newInstance(URLProviderFactory.java:117)
o.ji.connection.url.dialogs.ConnectionPanel.testConnection(ConnectionPanel.java:551)
o.ji.connection.url.dialogs.ConnectionController.actionPerformed(ConnectionController.java:174)
jx.s.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
jx.s.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
jx.s.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
jx.s.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
jx.s.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
j.a.Component.processMouseEvent(Component.java:6297)
jx.s.JComponent.processMouseEvent(JComponent.java:3275)
j.a.Component.processEvent(Component.java:6062)
j.a.Container.processEvent(Container.java:2039)
j.a.Component.dispatchEventImpl(Component.java:4660)
j.a.Container.dispatchEventImpl(Container.java:2097)
j.a.Component.dispatchEvent(Component.java:4488)
j.a.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
j.a.LightweightDispatcher.processMouseEvent(Container.java:4236)
j.a.LightweightDispatcher.dispatchEvent(Container.java:4166)
j.a.Container.dispatchEventImpl(Container.java:2083)
j.a.Window.dispatchEventImpl(Window.java:2489)
j.a.Component.dispatchEvent(Component.java:4488)
j.a.EventQueue.dispatchEventImpl(EventQueue.java:674)
j.a.EventQueue.access$400(EventQueue.java:81)
j.a.EventQueue$2.run(EventQueue.java:633)
j.a.EventQueue$2.run(EventQueue.java:631)
j.security.AccessController.doPrivileged(Native Method)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
j.a.EventQueue$3.run(EventQueue.java:647)
j.a.EventQueue$3.run(EventQueue.java:645)
j.security.AccessController.doPrivileged(Native Method)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
j.a.EventQueue.dispatchEvent(EventQueue.java:644)
o.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
o.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
j.a.Dialog$1.run(Dialog.java:1052)
j.a.Dialog$3.run(Dialog.java:1104)
j.security.AccessController.doPrivileged(Native Method)
j.a.Dialog.show(Dialog.java:1102)
j.a.Component.show(Component.java:1591)
j.a.Component.setVisible(Component.java:1543)
j.a.Window.setVisible(Window.java:843)
j.a.Dialog.setVisible(Dialog.java:987)
o.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
o.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
o.ji.connection.url.dialogs.URLConnectionDialog.runDialog(URLConnectionDialog.java:117)
o.ji.connection.url.dialogs.URLConnectionDialog.invoke(URLConnectionDialog.java:85)
o.adfdtinternal.model.adapter.webservice.wizard.rest.RestConnectionPanel.launchURLConnectionDialog(RestConnectionPanel.java:427)
o.adfdtinternal.model.adapter.webservice.wizard.rest.RestConnectionPanel.access$000(RestConnectionPanel.java:93)
o.adfdtinternal.model.adapter.webservice.wizard.rest.RestConnectionPanel$1.actionPerformed(RestConnectionPanel.java:201)
jx.s.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
jx.s.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
jx.s.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
jx.s.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
jx.s.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
j.a.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
j.a.Component.processMouseEvent(Component.java:6297)
jx.s.JComponent.processMouseEvent(JComponent.java:3275)
j.a.Component.processEvent(Component.java:6062)
j.a.Container.processEvent(Container.java:2039)
j.a.Component.dispatchEventImpl(Component.java:4660)
j.a.Container.dispatchEventImpl(Container.java:2097)
j.a.Component.dispatchEvent(Component.java:4488)
j.a.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
j.a.LightweightDispatcher.processMouseEvent(Container.java:4236)
j.a.LightweightDispatcher.dispatchEvent(Container.java:4166)
j.a.Container.dispatchEventImpl(Container.java:2083)
j.a.Window.dispatchEventImpl(Window.java:2489)
j.a.Component.dispatchEvent(Component.java:4488)
j.a.EventQueue.dispatchEventImpl(EventQueue.java:674)
j.a.EventQueue.access$400(EventQueue.java:81)
j.a.EventQueue$2.run(EventQueue.java:633)
j.a.EventQueue$2.run(EventQueue.java:631)
j.security.AccessController.doPrivileged(Native Method)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
j.a.EventQueue$3.run(EventQueue.java:647)
j.a.EventQueue$3.run(EventQueue.java:645)
j.security.AccessController.doPrivileged(Native Method)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
j.a.EventQueue.dispatchEvent(EventQueue.java:644)
o.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
o.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
j.a.Dialog$1.run(Dialog.java:1052)
j.a.Dialog$3.run(Dialog.java:1104)
j.security.AccessController.doPrivileged(Native Method)
j.a.Dialog.show(Dialog.java:1102)
j.a.Component.show(Component.java:1591)
j.a.Component.setVisible(Component.java:1543)
j.a.Window.setVisible(Window.java:843)
j.a.Dialog.setVisible(Dialog.java:987)
o.bali.ewt.wizard.WizardDialog.runDialog(WizardDialog.java:382)
o.bali.ewt.wizard.WizardDialog.runDialog(WizardDialog.java:298)
o.adfdtinternal.model.adapter.webservice.wizard.WSDCWizard.runWizard(WSDCWizard.java:553)
o.adfdtinternal.model.adapter.webservice.JdxPKWSAddin.invokeDCWizard(JdxPKWSAddin.java:155)
o.adfdtinternal.model.adapter.webservice.JdxPKWSAddin.invoke(JdxPKWSAddin.java:91)
o.i.wizard.WizardManager.invokeWizard(WizardManager.java:446)
o.i.wizard.WizardManager$1.run(WizardManager.java:530)
j.a.event.InvocationEvent.dispatch(InvocationEvent.java:209)
j.a.EventQueue.dispatchEventImpl(EventQueue.java:672)
j.a.EventQueue.access$400(EventQueue.java:81)
j.a.EventQueue$2.run(EventQueue.java:633)
j.a.EventQueue$2.run(EventQueue.java:631)
j.security.AccessController.doPrivileged(Native Method)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
j.a.EventQueue.dispatchEvent(EventQueue.java:642)
o.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
o.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
j.a.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
j.a.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by:
java.lang.ClassNotFoundException: HTTPClient.HTTPConnection
org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:506)
org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:422)
org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:410)
org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:107)
j.lang.ClassLoader.loadClass(ClassLoader.java:247)
o.adf.model.connection.url.HttpURLConnection.<init>(HttpURLConnection.java:146)
o.adf.model.connection.url.URLProviderFactory.newInstance(URLProviderFactory.java:117)
o.ji.connection.url.dialogs.ConnectionPanel.testConnection(ConnectionPanel.java:551)
o.ji.connection.url.dialogs.ConnectionController.actionPerformed(ConnectionController.java:174)
jx.s.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
jx.s.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
jx.s.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
jx.s.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
jx.s.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
j.a.Component.processMouseEvent(Component.java:6297)
jx.s.JComponent.processMouseEvent(JComponent.java:3275)
j.a.Component.processEvent(Component.java:6062)
j.a.Container.processEvent(Container.java:2039)
j.a.Component.dispatchEventImpl(Component.java:4660)
j.a.Container.dispatchEventImpl(Container.java:2097)
j.a.Component.dispatchEvent(Component.java:4488)
j.a.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
j.a.LightweightDispatcher.processMouseEvent(Container.java:4236)
j.a.LightweightDispatcher.dispatchEvent(Container.java:4166)
j.a.Container.dispatchEventImpl(Container.java:2083)
j.a.Window.dispatchEventImpl(Window.java:2489)
j.a.Component.dispatchEvent(Component.java:4488)
j.a.EventQueue.dispatchEventImpl(EventQueue.java:674)
j.a.EventQueue.access$400(EventQueue.java:81)
j.a.EventQueue$2.run(EventQueue.java:633)
j.a.EventQueue$2.run(EventQueue.java:631)
j.security.AccessController.doPrivileged(Native Method)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
j.a.EventQueue$3.run(EventQueue.java:647)
j.a.EventQueue$3.run(EventQueue.java:645)
j.security.AccessController.doPrivileged(Native Method)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
j.a.EventQueue.dispatchEvent(EventQueue.java:644)
o.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
o.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
j.a.Dialog$1.run(Dialog.java:1052)
j.a.Dialog$3.run(Dialog.java:1104)
j.security.AccessController.doPrivileged(Native Method)
j.a.Dialog.show(Dialog.java:1102)
j.a.Component.show(Component.java:1591)
j.a.Component.setVisible(Component.java:1543)
j.a.Window.setVisible(Window.java:843)
j.a.Dialog.setVisible(Dialog.java:987)
o.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
o.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
o.ji.connection.url.dialogs.URLConnectionDialog.runDialog(URLConnectionDialog.java:117)
o.ji.connection.url.dialogs.URLConnectionDialog.invoke(URLConnectionDialog.java:85)
o.adfdtinternal.model.adapter.webservice.wizard.rest.RestConnectionPanel.launchURLConnectionDialog(RestConnectionPanel.java:427)
o.adfdtinternal.model.adapter.webservice.wizard.rest.RestConnectionPanel.access$000(RestConnectionPanel.java:93)
o.adfdtinternal.model.adapter.webservice.wizard.rest.RestConnectionPanel$1.actionPerformed(RestConnectionPanel.java:201)
jx.s.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
jx.s.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
jx.s.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
jx.s.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
jx.s.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
j.a.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
j.a.Component.processMouseEvent(Component.java:6297)
jx.s.JComponent.processMouseEvent(JComponent.java:3275)
j.a.Component.processEvent(Component.java:6062)
j.a.Container.processEvent(Container.java:2039)
j.a.Component.dispatchEventImpl(Component.java:4660)
j.a.Container.dispatchEventImpl(Container.java:2097)
j.a.Component.dispatchEvent(Component.java:4488)
j.a.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
j.a.LightweightDispatcher.processMouseEvent(Container.java:4236)
j.a.LightweightDispatcher.dispatchEvent(Container.java:4166)
j.a.Container.dispatchEventImpl(Container.java:2083)
j.a.Window.dispatchEventImpl(Window.java:2489)
j.a.Component.dispatchEvent(Component.java:4488)
j.a.EventQueue.dispatchEventImpl(EventQueue.java:674)
j.a.EventQueue.access$400(EventQueue.java:81)
j.a.EventQueue$2.run(EventQueue.java:633)
j.a.EventQueue$2.run(EventQueue.java:631)
j.security.AccessController.doPrivileged(Native Method)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
j.a.EventQueue$3.run(EventQueue.java:647)
j.a.EventQueue$3.run(EventQueue.java:645)
j.security.AccessController.doPrivileged(Native Method)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
j.a.EventQueue.dispatchEvent(EventQueue.java:644)
o.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
o.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
j.a.Dialog$1.run(Dialog.java:1052)
j.a.Dialog$3.run(Dialog.java:1104)
j.security.AccessController.doPrivileged(Native Method)
j.a.Dialog.show(Dialog.java:1102)
j.a.Component.show(Component.java:1591)
j.a.Component.setVisible(Component.java:1543)
j.a.Window.setVisible(Window.java:843)
j.a.Dialog.setVisible(Dialog.java:987)
o.bali.ewt.wizard.WizardDialog.runDialog(WizardDialog.java:382)
o.bali.ewt.wizard.WizardDialog.runDialog(WizardDialog.java:298)
o.adfdtinternal.model.adapter.webservice.wizard.WSDCWizard.runWizard(WSDCWizard.java:553)
o.adfdtinternal.model.adapter.webservice.JdxPKWSAddin.invokeDCWizard(JdxPKWSAddin.java:155)
o.adfdtinternal.model.adapter.webservice.JdxPKWSAddin.invoke(JdxPKWSAddin.java:91)
o.i.wizard.WizardManager.invokeWizard(WizardManager.java:446)
o.i.wizard.WizardManager$1.run(WizardManager.java:530)
j.a.event.InvocationEvent.dispatch(InvocationEvent.java:209)
j.a.EventQueue.dispatchEventImpl(EventQueue.java:672)
j.a.EventQueue.access$400(EventQueue.java:81)
j.a.EventQueue$2.run(EventQueue.java:633)
j.a.EventQueue$2.run(EventQueue.java:631)
j.security.AccessController.doPrivileged(Native Method)
j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
j.a.EventQueue.dispatchEvent(EventQueue.java:642)
o.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
o.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
j.a.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
j.a.EventDispatchThread.run(EventDispatchThread.java:122) -
Getting error when creating the new application
Hi Sandeep,,
wen iam creating the new application iam getting
An error occurred while processing this page. Check the log for details.
where shud i have check log details..
i have given the following iputs
in select tab:
datasource name :oradsn
calender:
custom:
prefix tp
perids per year 13
application;
test
description:
example
shared service project
unassinged
instance :newinstance
calender
Select the default currency for viewing data in the application.
Default Application Currency
USD $ United States of America dollar
Will your application support multiple currencies?
no
Standard Plan Types Name
Plan Type 1
could you please let me know the solutions for this
thanks and best regards,
Kishore1. As you are taking service, your database is oracle database, you might have created a user/schema .
2. When you are creating FDM application and that too providing details of database , there is a button 'options',which has more options like tablespace..etc.
3. If you have created a schema and it has a specific table space ,then you need to provide these details also.else, while creating a user, if you have selected everything as default, then no need to go to 'options'.
Thankx
Nick -
Getting Error when creating sales order
Hello expert,
When i ma creating sales order In productive environment, not getting any error.
While creating sales order in Quality system The Error is"Order Type ZSOS has not defined in sales area 0201,02.00.
I checked customizing and both the system Quality and Productive system having following configuration and that is identical.
Combine sales Org
Sales Org Ref Sales org
0201 Blank
Combine Distribution Channel
Sales Org D.Channel Ref dist Channel
0201 02 02
Combine Division
Sales org Division Ref Divison
0201 10 00
Assign permitted order type to he sales areas.
Ref Sales org Ref Distribution Ref Division Sales doc type
0201 02 00 ZSOS
Please can anyone assist me where we are missing.
Regards
Ajit jaiswalHi Ajit,
you have to make these assignments in img
Combine sales organizations(ova0)
Combine distribution channels(ovam)
Combine divisions(ovan)
Assign sales order types permitted for sales areas(ovaz)
after these assignments the mentionwed error will be resolved
Revert if helpful
Mohit Singh -
Getting error when creating worklists for FSCM - Collections management
Hi All,
I am trying to implement FSCM - Collections Management and after all the configuration in SPRO and periodic processing in SAP easy access for transferring Accounts recievable, when I try to create Worklist i get the below error "No BP rules with BP role category UDM000 exists for partner 200"
I have created and assigned the BP role category UDM000 to my BP rule, yet i get this error. Is there anyway I can check the assignment of the rule.
Please help me with your thoughts in getting this error fixed.
Thanks & Regards,
AmeetThat's fine deep will take care
Ameet my final options are
1.As deep said check the validity of the BP @ BUT 100
2.Check your config settings one again completly
Cross-app components>master data sync>Synchronization control (check all the settings).
Cross-app components>master data sync>customer /vendor integration>bp settings>settings for cust int -->define BP role for direction cust to BP(check you have assigned the group to the role).
Cross-app components>master data sync>customer /vendor integration>bp settings>settings for cust int -->field assign for cust int >assign keys>define number assign from cust to bp (here check for the bp and cust group and same no fields).
3.If you are running the the worklist gen by batch please check for the overlaps and the sufficient no of jobs available for processing.
4.If your you are using ECC 6.3 or lesser version then apply the note 1134890
5. The error may be mis-leading because the program always through the same error if there may be some other issues - so debug the pgm
6. If every thing is fine above then write to SAP
Thank you.
Regards,
D vasanth -
Getting Error when createing Table control in Module Pool.
Hi expert ,
i am creating a module pool program . i want to crate line item value for that i have created table control on screen 200 .
but when i am activation to that giving error below mention.
The field "ZFBDCHALLAN-EBELN" is not assigned to a loop. "LOOP ...ENDLOOP" must appear in "PBO" and "PAI".
thanks
chandraIts mandatory to have loop endloop in both events
PBO and PAI
loop your internal table similarly.
Please check it should be below format
PROCESS BEFORE OUTPUT.
* Set PF Status for screen 100.
MODULE status_0200.
* This module will initialize the field
MODULE init_0100.
LOOP AT t_custmat_asg INTO w_custmat_asg
WITH CONTROL tc_1
CURSOR tc_1-current_line.
* It will count the record in internal table
MODULE set_linecount.
* Screen Modifications
MODULE status_check.
ENDLOOP.
PROCESS AFTER INPUT.
* Module AT EXIT-COMMAND
MODULE exit_0200 AT EXIT-COMMAND.
LOOP AT t_custmat_asg .
CHAIN.
FIELD :
w_custmat_asg-check,
w_custmat_asg-kunnr,
w_custmat_asg-name1,
w_custmat_asg-asgtyp,
w_custmat_asg-productcls,
w_custmat_asg-sctegry,
w_custmat_asg-ctegry,
w_custmat_asg-parent,
w_custmat_asg-frmdate,
w_custmat_asg-todate,
w_custmat_asg-frecster,
w_custmat_asg-salesrep,
w_custmat_asg-flag,
w_custmat_asg-username,
w_custmat_asg-udate.
* Validation For Forecaster.
MODULE validate_forecaster.
* Validation For Salesrep.
MODULE valiate_salesrep.
* Validation for Customer
module validate_customer.
* Validate null value
module validate_null_vals.
* Validation For Data Changed On The Screen
MODULE data_changed_0200 ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
Regards
Satish Boguda -
We try to create standby database from a production DB on another server (10.2.0.4). The RMAN backup is in the nfs file system which is also mounted to the target server (the DR box). So, the access path for the rman backup is the same look from primary DB server and DR DB server. I started the RMAN run:
RMAN> RUN
2> {
3> ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
4> ALLOCATE AUXILIARY CHANNEL aux2 DEVICE TYPE DISK;
5> DUPLICATE TARGET DATABASE for standby
6> nofilenamecheck
7> dorecover;
8> }
9>
10> exit
using target database control file instead of recovery catalog
allocated channel: aux1
channel aux1: sid=582 devtype=DISK
allocated channel: aux2
channel aux2: sid=584 devtype=DISK
Starting Duplicate Db at 21-JUN-12
contents of Memory Script:
set until scn 12198261770353;
restore clone standby controlfile;
sql clone 'alter database mount standby database';
executing Memory Script
executing command: SET until clause
Starting restore at 21-JUN-12
released channel: aux1
released channel: aux2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/21/2012 16:33:36
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
===========================================================================
The backups should have controlfile. There is rman show all display:
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION OFF;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backup/inbound/online/controlfile_auto%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT '/backup/inbound/online/%d_%T_%t_%s';
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE ENCRYPTION FOR DATABASE OFF;
CONFIGURE ENCRYPTION ALGORITHM 'AES128';
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/backup/inbound/online/snapcf_inbound.f';
Why and how to fix? Thanks for help!Here is the list of command:
RMAN> list backup of controlfile ;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
5518 Full 4.57M DISK 00:00:07 17-JUN-12
BP Key: 5518 Status: AVAILABLE Compressed: NO Tag: TAG20120617T035926
Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120617-00
Control File Included: Ckp SCN: 12197994840698 Ckp time: 17-JUN-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
5522 Full 4.57M DISK 00:00:00 18-JUN-12
BP Key: 5522 Status: AVAILABLE Compressed: NO Tag: TAG20120618T010158
Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120618-00
Control File Included: Ckp SCN: 12198041382572 Ckp time: 18-JUN-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
5526 Full 4.57M DISK 00:00:01 19-JUN-12
BP Key: 5526 Status: AVAILABLE Compressed: NO Tag: TAG20120619T010352
Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120619-00
Control File Included: Ckp SCN: 12198090424606 Ckp time: 19-JUN-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
5530 Full 4.57M DISK 00:00:02 20-JUN-12
BP Key: 5530 Status: AVAILABLE Compressed: NO Tag: TAG20120620T010304
Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120620-00
Control File Included: Ckp SCN: 12198146424201 Ckp time: 20-JUN-12
BS Key Type LV Size Device Type Elapsed Time Completion Time
5534 Full 4.57M DISK 00:00:02 21-JUN-12
BP Key: 5534 Status: AVAILABLE Compressed: NO Tag: TAG20120621T010357
Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120621-00
Control File Included: Ckp SCN: 12198210334547 Ckp time: 21-JUN-12
==================================================================
I tried to catalog the controlfile:
RMAN> catalog controlfilecopy '/backup/inbound/online/controlfile_autoc-2080040856-20120621-00';
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of catalog command on default channel at 06/21/2012 17:24:32
ORA-19563: control file header validation failed for file /backup/inbound/online/controlfile_autoc-2080040856-20120621-00
====================================================================
We have level 1 backup everyday, except Sunday. I have level 0 backup on Sunday. I alos tried the metalink note RMAN Duplicate For Standby Fails with Rman-06024: No Backup Or Copy Of The Control File Found To Restore [ID 466321.1]. It does not work.
Thanks for help!
Maybe you are looking for
-
USB Device no longer recognized (Ratoc U2SCXU SCSI Converter)
I'm having problems with a device that used to work fine in an older MacOS (10.5, Leopard) but no longer being recognized in Lion. The Ratoc Systems International SCSI COnverter model U2SCXU is no longer visible in System Information, their Utility,
-
Hi, I have some difficulty displaying images in a popup window. The (Tomcat 5.5) server apparently sends them with a content type of utf-8 text, which leads to an exception page shown in the popup window instead of the picture. In web.xml I checked t
-
BDC for Hiring a Employee through hiring action
Hi Experts, We have done BDC for hiring action. We do have PA & OM integrated. T77S0 PLOGI ORGA "X". After hiring is compelted through BDC holder relationship is not appearing for position. But when we are individually hiring an employee, position is
-
I have cox as my internet provider and the last couple weeks i have been having a ton of connection problems. The status light on my airport express is green but my computer is saying the connection is timing out and my phone is having issues connect
-
For some reason, video, even after shared to media browser in iMovie, will not show up in the media browser sidebar on iWeb. Not sure why. I can still just drag and drop it but was wondering why this is. Also, is there anyway to get a video to open o