Payload via the message interface

Hi all,
Is it possible to get the payload/log information for the XI message from the table SXMSPMAST via the message interface name ?
Thanks for your help

Nope.
But you can get details from table SXMSPEMAS. I think best would be you can create a view with join on MSGGUID with SXMSPMAST and then you can filter records base on messsage interface name. Field "OB_NAME / IB_NAME" from table  SXMSPEMAS indicate outputbound / inbound  interface name respectively.
You can find all othe fields here.. Interface Namespace, Communication Party..so on.
Hope this will help.
Nilesh

Similar Messages

  • Error message when opening Outlook: The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.

    In an Exchange 2010 server/Outlook 2013 environment, one of our users is getting an error message every time they start Outlook. The error message says: "The operation failed. The messaging interfaces have returned an unknown error. If the problem
    persists, restart Outlook."
    The error log message details are as follow:
    System
    Provider
    [ Name]
    Microsoft Office 15 Alerts
    EventID
    300
    [ Qualifiers]
    0
    Level
    4
    Task
    0
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2013-01-08T15:54:49.000000000Z
    EventRecordID
    655
    Channel
    OAlerts
    Computer
    Computer-Name.domain.local
    Security
    EventData
    Microsoft Outlook
    The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
    301670
    15.0.4420.1017
    xyfc
    0x8004011B
    The system is as follows:
    Size of .pst file: 2.3 GB (Unicode format so there should be plenty of space left)
    OS: Windows 7 (64-Bit)
    Application: Outlook 2013 (32-Bit)
    The user upgraded from Outlook 2010 a few months ago and the error message has only recently started appearing on startup. I thought it was a corrupt mail profile, so I have already tried creating a new mail profile, as well as the repairing tool in Outlook.
    I even tested another email account and that worked just fine. So apparently it is something wrong with the specific user's account/profile and not something wrong with the computer - since my email account worked fine on his computer.
    Any help would be greatly appreciated.

    I had the same error message, only in my situation Outlook would only open successfully every 4 or 5 attempts. When Outlook would open (versus just hanging at the splash screen), I would get two dialog boxes with the warning/error message. 
    After I clicked okay I could get into Outlook.
    Previously I experienced this problem running my Office 2010 client with my Exchange 2007 mailbox on my old laptop.  The problem followed my mailbox through an Exchange 2010 migration (so new Exchange org), client upgrade to Outlook 2013, and a new
    laptop (so I knew it wasn't a corrupt profile).  This led me to the conclusion that it was a corrupt item(s) in my mailbox.
    To resolve the issue, I archived *everything* in my mailbox to a PST file, ran SCANPST to fix the corruption, and then uploaded everything back into my Exchange mailbox one folder at a time, stopping after each folder to close and restart Outlook so I could
    narrow down which folder had the corrupt item if the problem recurred.  I'm happy to say my issue is now resolved.

  • Unable to read payload from the message object in XI

    Hello Guys,
    Please help me about my problem in XI version 7.0.im quite new here.
    im trying to test my config but error message occured. "Unable to read payload from the message object"
    when i checked the comm channel this is the error message :
    Error during database connection to the database URL 'jdbc:sqlserver://172.16.40.20:1433;databasename=TRAVEL:SelectMethod=cursor' using the JDBC driver 'com.microsoft.sqlserver.jdbc.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:sqlserver://172.16.40.20:1433;databasename=TRAVEL:SelectMethod=cursor': com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "TRAVEL:SelectMethod=cursor" requested by the login. The login failed.'
    when i tried my login in sql it works...but in this message the login is failed..what shall i  do..
    Please advice.
    Thanks in advance
    aVaDuDz

    Hi
    Check with the connection string & Authorization of user you have used.
    MSSQL string is
    jdbc:microsoft:sqlserver://dbhost:1433;databaseName=example;SelectMethod=Cursor
    While doing JDBC its good to refer Note 831162 lot of problems can be resolved.
    Thanks
    Gaurav

  • Unable to read payload from the message object

    Hi
    I have a scenario where i am send request to http receiver and getting the response. When I am testing through WFETCH it is working fine. But when i am testing through XI I am getting the follwoing error
    Unable to read payload from the message object
    I have tested the XI payload in mapping. I have done all kinds of testing but it is still giving the same error.
    One more strange thing is
    I have done one BPM scenario where Data is coming from Source to BPM( which is asyn) and then from it will go from BPM to Target (which is sync) But when I am checking the SXMB_MONI... it showing the messages like this
    Source to BPM
    Target to BPM
    Target to BPM.
    But i think it should show message like
    Source to BPM
    BPM to Target
    Target to BPM
    why i am getting the flo

    Hi
    Check with the connection string & Authorization of user you have used.
    MSSQL string is
    jdbc:microsoft:sqlserver://dbhost:1433;databaseName=example;SelectMethod=Cursor
    While doing JDBC its good to refer Note 831162 lot of problems can be resolved.
    Thanks
    Gaurav

  • An Attachement for the payload of the message monitoring.

    Hello ,
    From the forum links, I found that to access a message payload for the message monitoring, we need to call <u>cl_xms_persist->read_msg_all.</u>
    and the export parameter would give the payload message as an attachment.
    <i>
    But when I tried to find if there is any attachment with the messages I dont see them (size comes with the value 0).</i>
       <u>    CALL METHOD ex_message->numberofattachments
            RECEIVING
              size = size.</u>
    <b>
    Is there any other option available to get a payload for the message?</b>
    Thanks a lot.

    Hi Arjun,
         You can see your payload in Tcode  SXMB_MONI
         SXMB_MONI-->
         MONITOR FOR PROCESSED XML MESSAGES-->
         click F8 (if required change the date of execution from to select specific message on date range)-->
         Double click on the right most 3D button type of box before the flag icon,
    Now you will be able to see the Different pipeline Execution steps(7 Steps)  that Your message has under gone .Click on any one of them and see your payload in payload folder at each and every step.This helps us in understanding the way your message is undergoing transformations through out its journey from sender to receiver.
    VIRTUAL RECIVER..Is actually a part of an annonymous and adressable unit like service to simulate the receiver that is participating in B2B communication.Its jus a mandatory parameter that has to be mntione din Receiver deternination when We test our B2B scenarios using this option in ID part of PI/XI.
    Thanks,
    Ram.

  • Outlook 2013 Changing Shared Calendar Appointment Categories causes error The Operation failed the messaging interfaces have returned an unknown error

    Hi
    Our user used to be able to change the categories in a shared outlook calendar appointment but is now getting the error:
    The Operation failed the messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
    We have tried re-creating the mail profile but still get the same error.
    If anyone has any other suggestions, that would be great, thanks.

    Glad to hear that it works fine in new profile. It seems your old OST file or other file in profile is corrupted. After you create a new profile, Outlook would re-sync your mailbox to a totally new OST as the data file.
    Tony Chen
    TechNet Community Support

  • WLC 5508 Cant get access via the Mgmt Interface

    Hello everybody,
    i have a wlc 5508 (version 7.0.98.0) , if i'm pinging the service port interface or try to get access via this interface, everythings is fine, but if cant get access via the management interface. (but its pingable)
    the crazy thing is, that the LAP joined successful ti the wlc, but the Upgradetool (converting an AP to an LAP) doesnt work, because the tool cant reach the mgmt interface of the wlc.
    there are no ACLs, which are blocking the traffic between wlc and my computer
    Does anyone has an idea, what i've configured wrong???
    regrads,
    Rocco

    Interface Name                   Port Vlan Id  IP Address      Type    Ap Mgr Guest
    wlan1                                   1    16       172.16.2.10      Dynamic No     No
    management                         1    2        172.16.1.10      Static     Yes    No
    wlan2                                   1    220      172.16.3.10   Dynamic No     No
    service-port                        N/A  N/A      10.75.100.99      Static     No     No
    virtual                                N/A  N/A      1.1.1.1               Static     No     No
    and my Pc is in the 172.16.4 subnet
    i have no access to the switch port, where the controller is connected to, but i know that this port permits access to the vlans which are used

  • How to Fix ''The messaging interface has returned an unknown error. If the problem persists, restart Outlook.' Error

    How to Fix ''The messaging interface has returned an unknown error. If the problem persists, restart Outlook.' Error, user has outlook 2007 connected to exchange 2010 server , I tried scan pst, configuring new profile but no luck so far. Please suggest !
    Aditya Mediratta

    Hi,
    Please try the steps mentioned below and check if it helps:
    Open Computer > Local Disk C > Program Files > Microsoft Office > Office 12 > Outlook.exe.
    Right click on outlook.exe and click on Properties and then click on
    Compatibility tab. Uncheck the box ‘run this program in compatibility mode for’ under compatibility mode, click on Apply and OK.
    Note: If you are using 64 bit computer then the file location of the file will be
    Computer>Local Disk C>Program Files (x86) >Microsoft Office>Office 12>Outlook.exe
    Similar thread:
    https://social.technet.microsoft.com/Forums/en-US/aa396c9e-0ce5-4de5-99e3-4f0d771b07e0/exchange-2007-messaging-interface-has-returned-an-unknown-error
    Best Regards.

  • Unable to find the Message Interface Receiver Determination

    Hi Everyone,
    I am unable to find the Message Interface Receiver Determination in the SAP BASIS 7.0 --> http://sap.com/xi/XI/System. in IR.
    I am using P.I 7.0 SP 15
    Could anyone let me know what could be the problem.
    Regards,
    Varun

    Hi Sridhar,
    I cant find the Message Interface Receiver Determination in IR under the standard SWCV SAP BASIS 7.0 and under the namespace http://sap.com/xi/XI/System. in IR.This Message Interface will be useful while configuring in enhanced Receiver Determination.
    http://help.sap.com/saphelp_nw2004s/helpdata/EN/84/e8763c997fda50e10000000a11405a/frameset.htm
    Regards,
    Varun

  • The operation failed. The messaging interfaces have returned an unknown error. During reply all

    Hi,
    I am having problem when click "reply all" for my outlook2013, message show as below,
    The operation failed. The messaging interfaces have returned an unknown error. ....
    Please help...
    CL

    does this issue continue when opening outlook in safe mode (outlook /safe)?
    also try creating a new mail profile in control panel to see the result.
    Flynn

  • Create users via the CLI interface on a SX20

    Hi 
    Are there some who know how to create users via the CLI interface on a SX20. You can do this via the web interface but I have many video installations where I need to create a user account. Therefore, it would be easiest if I can make it through the CLI interface. 
    Best regards 
    Jesper

    Unless there's a very well hidden command somewhere, then no. As far as I know, this can only be done for the remote supportuser account;
    xcommand UserManagement ?
    xCommand UserManagement RemoteSupportUser Create
        ExpiryDays: <1..31>
    xCommand UserManagement RemoteSupportUser Delete
    xCommand UserManagement RemoteSupportUser DisablePermanently
        Confirm(r): <Yes>
    xCommand UserManagement RemoteSupportUser GetState
    /jens
    Please rate replies and mark question(s) as "answered" if applicable.

  • How do I access RunState via the C interface?

    I'm utilzing TestStand by controlling it via a C++ program and TestStand as a COM module.  I haven't been able to find how to access the RunState property.  Thanks.
    -G-

    Hey Grasshopper,
    I'm not certain, but it sounds like you are building a User Interface in C++ to operate your sequences, much like the one you can find at C:\Program Files\National Instruments\TestStand 3.1\OperatorInterfaces\NI\Full-Featured\C++ using MFC.  If this is the case, then the way to get access to the RunState property is by utilize UIMessages.  You should be able to do a search on the forums or in the Developer Zone and find some more information and sample code about UI Messages, but in a nutshell, you'll send a message to the User Interface that you are building by utilizing the ActiveX adapter (Action Step) in a TestStand sequence (The Method is PostUIMessageEx and can be found in the Thread class).  When you send the data you will want to send ThisContext via the ActiveX parameters.  You will then use the ApplicationMgr Control in your UI to register the UserMessage event and then create a function to be called when this event does occur.  In this function, you can get the Sequence Context from the ActiveX parameter and at that point can handle it just like any other code module to get and set items within your locals, runstate, or whatever you want.  That should give you a start, let me know if you into major issues.
    Adam B. 

  • Transmit periodical frames via the Network Interface

    Hi,
    Does anybody know how to transmit periodical frames via the CAN Network Interface?
    I am using NI USB-8473 (CAN-USB Interface).
    Thank You
    Monogram

    The device itself has no CPU and therefore does not allow to run periodic objects on the hardware. The only chance is to use a timed while loop to run the write net function periodicaly in software. If that doesn't work out because of jitter or latency then only the PCMCIA device can help for a notebook solution for example.
    DirkW

  • 3640 MCU - Conferences Created via the web interface

    When a conference is created via the 3640 web interface, it will timeout in 30 minutes if no one joins the conference. Can and if so, how can you change that timeout value?

    I don't think there's an adjustment for this. You should probably call Cisco and see.

  • 'Reply with meeting' button causes "... operation failed. The messaging interfaces have returned an unknown error"

    Hi all
    We're running Outlook 2010 SP2 on W7 SP1 64-bit and getting this error when clicking the "Reply with meeting" button:-
    The same error occurs whether we click this button when the message is closed or open and when we untick "close original message window when replying or forwarding".
    Any ideas please?
    Thanks
    Scott

    Hi,
    You can try if this issue persists when you switch Outlook to Exchange Online Mode:
    1.Click the File tab.
    2.Click Account Settings, and then click Account Settings.
    3.On the E-mail tab, click the Exchange account, and then click
    Change.
    4.Under Microsoft Exchange server, clear the Use Cached Exchange Mode
    check box.
    5.Exit and then restart Microsoft Outlook 2010.
    This issue may be related to 3rd-party add-ins, you can verify this by running Outlook in Safe Mode:
    Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
    If there’s no problem in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue.
    I hope this can help.
    Regards,
    Melon Chen
    TechNet Community Support

Maybe you are looking for

  • External drive use for Time Machine change to "Read Only"

    I have an external hard drive set up for backing up with Time Machine on my Mac. It has been working well. Now when time machine tries to back up it tells me the external disk is read only. The hard drive does mount to the computer and will let me op

  • Finder not loading since upgrading to Yosemite

    Hi Everyone, I have a 2012 Macbook Pro 15" model. Intel Core i7 processor and 8GB RAM. I upgraded to OS X Yosemite yesterday from 10.8 and since then, I've been experiencing longer boot times, Finder not loading my local files and folders, Launchpad

  • Location Heuristics-diff of results in background and foreground

    Hi, We have this weekly bacth job of location heu.. just one program. nothing preceding  and succeeding it. I find the results in background and foreground different. This is partcularly wrt the receipts being created before the lead time of the loc-

  • Don't display attribute in a query

    Hi! I have an InfoObject with attribute. When I execute query on InfoCube instead of attribute display '#'. but there are filled fields for attribute in InfoCube. What can I do?

  • Question about minimum speeds required for watching movies.

    I watch Netflix on my home computer fine (and Hulu) and will occasionally share the screen with my HDTV and it works fine. With AppleTV, can I expect to be able to rent/watch movies with basic DSL Internet, with speeds up to 1.5 Mbps? Or do I really