Payment Method  Indicator

Hi All,
Can anybody explain the  importance and use of "Payment Method Indicator " in Transaction Type Dependent Control Sales as per Receipts in  POS Inbound .
Thanks In Advance
Sohan

Hi,
In certain cases retailers the vouchers (payment method) defined as articles. When you check this indicator, system will convert the item in to payment method for billing in the inbound. So the sale or use of these vouchers are identified by the system easily.
hope his helps
Suhail Shaik

Similar Messages

  • Payment Method in Payment Run

    When doing payment run, where are the payment methods picked from Vendor master or invoice. Because in some cases the payment method exists in vendor master but not in invoice. And when we do the payment run, system asks to enter the valid pmt method. But sometimes if the payment method is there in the vendor master and not in invoice then the system takes it and does not ask to reallocate in payment proposal.
    Can someone please explain how does this work.

    Hi
    1. Payment method indicated in Vendor Master is defaulted during payment run, provided you did not specify the payment method during document posting. But this will not show up in the line item. If you specify a payment method during document entry (or change subsequently) this will be defaulted in the payment run.
    2. The invalid payment method that you are encountering is not because that you are giving that in master or line item - but because of some other issues - For eg. You might have indicated the payment method "bank transfer" that would require an entry of bank details in the vendor master, but vendor master doesn't have those. This would throw an exception despite the fact you enter this in Vendor master or line item.
    Hope you understand.
    Regards,
    Ram

  • Family sharing - one member get's message no valid payment method

    Hi there,
    I have family sharing enabled for my wife and two daughters. The latter can download stuff the app store and update apps. My wife however get's a message that there is no valid payment method attached to the family. But the three other members can download new stuff and update existing apps easily.
    It gets weirder when my wife leaves the family sharing cause she keeps getting the same message.
    iPhone 6, iPhone 5 and 5s working great. My wife has a 4s.
    Any clues how to solve this?
    Tnx a lot, Paul.

    Hi Nancy,
    I also found Note 445233 - FPY1: Separate exception indicator for 'amount check'
    "FPY1
    During the payment method check the system states that a payment method is not qualified, because the company code-specific amount limits (minimum amount and maximum amount per payment method and company code) prevent this (fields TFK042E-VONBT and TFK042E-BISBT).
    The result is the general exception indicator
    '006' No valid payment method found."
    Hope this helps

  • Default due date , payment method when posting invoice with Special G/L

    Hi Gurus,
    I have a question is when I am posting an invocie to a vendor (FB60), Due On date, payment method  are automatically calculated based on the defaulted baseline date and the payment term in the vendor master. But when I am posting the invocie to the same vendor with Special G/L indicator, Due On date, payment method are not automatically calculated and system are expecting me to enter this date manually. Is there a way we can default this Due On date, payment thod based on payment term like it happens when posting to other invoices without Sp GL indicator ?
    Thanks
    Edited by: Ngoc Hoang on Nov 29, 2011 8:30 AM

    Dear Ngog,
    In general, special G/L transactions are used to map special processes
    to be stated separately in the balance sheet.So if you use special GL
    indicator, the fields relevant to payment terms (including baseline
    date) are not displayed. This is not controlled by field status.
    To make the fields You need ready for input for posting
    with special G/L indicator, the following Customizing setting is
    necessary:
    Financial Accounting -> Accounts Receivable and Accounts Payable
    ->Business Transactions -> Outgoing Payments -> Automatic Outgoing
    Payment-> Payment Method/Bank Selection -> Configure payment program ->
    All company codes -> double-click on corresponding company code -> under
    Vendor -> 'Sp. G/L transactions to be paid' you should enter the special
    G/L indicator A,B, etc.
    As explained in SAP note 4683, the only standard possibility to get the
    field payment terms on creating a posting with a special G/L indicator
    is by setting in the payment program configuration (trans. FBKP) for
    'All company codes' for customers/vendors 'Sp. G/L transaction to be
    paid'.
    Mauri

  • Payment Method Supplement issue

    Hi,
    Is there anyone help me to resolve the issue of using Payment method Supplement. We can use this indicator at the vendor master level or override it at the time of invoice entry.  I tried to use this indicator at the time of posting the vendor invoice using FB60. But when I ran the payment proposal i.e. F110, it is not grouping the cheques among other cheques which have the payment method supplement active at the invoce entry level. Payment program config FBZP has this indicator active.
    Is there any config/settings are missed in order to make this functionality works.
    Any help is appreciated.
    Thanks
    Faheem

    I can change either at the company code level or at the time posting a vendor invoice level. I changed at the invoice posting level but the payment program cannot pick that change and wont do the sorting of cheques. I think there is something needs to be changed in the payment program config.

  • Need to send the remittane advices via e-mail for specific payment method

    Hi,
    I need to genrate and send payment advices to vendors via e-mail for the specific payment method and specific currency.
    I have to send the payment summary and DME Accompaying sheet via e-mail to the vendors. And if no e-mail exists for vendors the system should generate a spool to request print those.
    VS Kumar

    Hi Sateesh,
    You need to copy SAMPLE_PROCESS_00002040 and adjust it to write code as per your requirement. This BTE runs for each payment advice note to be sent and in the module, it is mentioned 1=print, 2 = Fax and I=mail, so you can set your priority, that if an E-Mail address is maintained in the vendor master, send mail or if no E-mail address is maintained shoot a Print.
    From Configuration side, you need to maintain the Z copy of SAMPLE_PROCESS_00002040 in FIBF transaction under the Process module of a customer without country or application indicator. 
    Refer to SAP Note 836169 - Consulting: Payment advice notes by email or fax.                                                                       
    Regards,
    SAPFICO

  • How to include payment method in F-28 TX (I need in F-28 Obligatory)

    How to include payment method in F-28 TX (I need in F-28 Obligatory)

    Hi
    If you want to make assignment and document header text has required. Then go to SPRO-Financial Accounting - Document types - Define document types for entry view
    Here you select the Document type for incoming payments (ie)  DZ.
    In DZ Document type configuration there is section called required during document entry, there you will find check boxes referance document and Document header. Tick them, then it will become a required entry.
    Note:- When you do the entry These fields will not show with the indicator of Mandatory item but u cannot post the transaction without filling these fields.
    Cheers
    V.Krishnan
    (Assign Points if useful)

  • Visa payment method not accepted

    Suddenly I need to complete payment info, while it has always worked fine.
    When adding the security code I get the following message: "Your payment method was declined. Please enter another payment method. "
    What to do?'

    Hi Visa_issue_guy
    However, my bank says all is ok with the account, balance and card?!
    "Balance" implies you are using a debit card. Apple accepts credit cards, but debit cards have been phased out as an acceptable payment method starting over year or so ago. They have continued to work for many people, but once they don't, you must then use a credit card or other form of payment exactly as the message indicated.
    Until December 6 last year, Apple's Terms and Conditions specifically omitted any mention of debit cards, and specifically included credit cards as an acceptable form of payment. Now, they are silent on the issue and only say you must use "an acceptable payment method". To determine what that is, you have to research more:
    iTunes Store: How iTunes Store purchases are billed
    Billing process
    When you make a purchase in the iTunes Store, Mac App Store, App Store, or iBookstore your account will be billed at the time of or shortly after your transaction. If you use a credit card or PayPal account for a transaction, Apple may obtain preapproval for an amount up to the amount of the order. ...
    All fees will be billed to the credit card or PayPal account you designate during the registration process.
    No mention of debit cards.
    I hope this eliminates any uncertainty regarding this problem.

  • F110 - Payment method

    Dear All!
    A would like to clearing a partner's debit and credit documents.
    But I always receive an error during the automatic payment running. Now I found that
    problems is that the payment method has not filled automatically during the credit note creation.
    In the debit creation it has filled from the Vendor master.
    How can I set that the credit note gets the payment method automatically?
    Thanks in advance,
    Gábor Somogyvári

    Hi Gabor,
    Apart from vendor master you can update the payment in payment terms as well.
    At the time of processing the credit memo you can add "V" indicator so that it will copy the properties of original invoice it belongs to.
    Also make also sure that the "individual payment" flag in the vendor master is not set.
    Warm regards,
    Murukan Arunachalm
    Edited by: Murukan_A on Jan 24, 2012 9:59 AM

  • Payment Advice output according to no. of lines in FBZP - Payment methods -

    Hi All
    I would like to use the option  ''Payment adv after lines' in the Payment advice output according to no. of lines. currently we have 'Always pyt adv' active  -- In FBZP - Payment methods for Co code
    But I see that the first radio button is disabled. Can anyone let me know how to select this option.
    Thanks in advance
    Krishna

    Hello,
    The radio button "Payment adv. after..... lines" is used for "Indicator that determines that a payment advice note is to be printed if more items are paid than there is space fo in the form"
    To activate this one, you need to select "restricted to" radio button with number of ROWS you are allowed in "Note to payee lines on the form" area. Then the "Payment adv. after.... lines" get activate and accordingly you can select.
    Hope this solves your problem.
    Regards,
    Ravi

  • Including Payment Method field BSEG-ZLSCH in Down Payment (T code F-29)

    Hi There;
    Can any one help me in creating an extra field in Down Payment document?
    There is a requirement to include the SAP Standard Payment Method field in Down Payment screen layout.
    I appreciate your help.
    Thanks
    Arshad

    Hi Arshad,
    Pl goto FBZP tcode.
    Select 'All company code' tab->select your co code->give spl gl indicator which you want use under Customer-Sp. G/L transactions to be paid field and Save.
    I hope this solves your issue.
    Regards,
    Shaik.A
    Edited by: shaik A on Feb 8, 2009 8:31 AM

  • Payment method in Contract Creation

    Hi,
    Was just wondering why the payment method i entered during contract creation (Goto > Header > Financial Accounting > Pmnt method) does not kick in during payment run. What happens is that the payment method defined in the master record is being used instead of the one i indicated. Kindly advise. Thanks.

    Hi,
    This is because when you are trying to release the Contract using OR......system first search for payment method u have assigned for the particular material assigned to particular contract customer.
    If nothing is available there only than system picks payment method from the contract.
    Hope it helps.
    Raj

  • HT1918 Can I have multiple payment methods on one account

    Currently, both of my teenage sons and I are sharing an Apple account with one payment method. I would like to have a payment method for each of us.

    If they are teenagers, it is not too soon to set up individual accounts per person. 
    This will address the separate payments issue, and will make it much easier in a few years when they start heading off to university or moving to their own living arrangements.

  • How do I change my payment method. I put in debit card info. It now says security code invalid, but it isn't. I understand that might be the wrong type of payment. But now it won't let me edit this info. It is also blocking me from updates and free dlds.

    How to change payment method or delete improper info.?

    Try signing out of your account, Reset the iPad [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is absolutely safe..... And sign back in again!

  • Why is my payment method declined. I ask the bank and they told that's no any problems with my card also i used my card on booking and amazon and everywhere and it's ok

    Last night I attempted to purchase an app from the App Store on my iPhone 5s The previous day I had purchased an app with no issues, and this time was told that my payment method was invalid. When I clicked 'Continue' to fix my information, everything was correct so I re-inputted my credit card security code and tapped done. No, fail, declined.
    I called my bank as I am currently vacationing in Libya  and if my debit card (the card my iTunes account uses) starts getting declined I will have issues. No, no problems, they had a note in my account that I was traveling, and there are no holds or flags on my spending. She also noted that the iTunes store had requested a verification of $0.99 but had not charged the card for the amount.

    OOnce the $ .99 charge goes through to verify your payment method, you should be able to make your purchase.
    wait 24-48 hours and try again.

Maybe you are looking for