Payment popup (NEOS / Ogone ) does not appear in Safari 4.x
Dear people,
We have noticed that the popups with the payment application on our website portal at portal.boip.int do not load anymore.
Unfortunately, we can get no further information from Fortis Bank here in the Netherlands. They say it can be solved by allowing the popups in Safari, but that doesn't work.
I have tested with an older version of Safari (3.0.2), and the popup works well there.
We have searched the web, and have found out that the problem could be the way that we call the popup.
It might well be the script vs. user-triggered-popup issue.
Who has encountered similar problems, and could advise us how can we could tackle this one?
Best regards,
Robert van Hall
BOIP Application Manager
http://www.boip.int
http://portal.boip.int
HI and Welcome to Apple Discussions..
Try Firefox instead. Might have better luck.
http://www.apple.com/downloads/macosx/internet_utilities/mozillafirefox.html
Carolyn
Similar Messages
-
The spacebar on my keyboard does not appear in safari
The spacebar does not appear on the keyboard in safari but does appear in apple support
In the address bar it won't, there are no spaces in URL's.
Does it appear in the search bar? -
i have problem in safari 7.0.3. web pages get loaded but dont appear on screen. how do i get rid of that?
Do you have any extensions or other add ons configured within Safari? If so, please remove or disable all of those, restart Safari, and try accessing the web page again.
-
My yahoo contact groups does not appear in safari
All of my Yahoo contacts transferred just fine except for the groups - I don't see my groups on my iPad contacts app or even in safari.
How do I deal with this? It's very annoying since I have several groups with loads of contacts in each. Thankscontact adobe support if your subscription was paid more than 24 hours ago, http://www.adobe.com/support/chat/ivrchat.html
-
When I change a password, sometimes I get a pop-up asking if I want to save the new password - sometimes it doesn't appear.
How can I save the new password if popup does not appear?The website may be using autocomplete=off to prevent Firefox from saving the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/ -
Apple account none payment methode does not appear
when i creat my apple id the none option in payment methode does not appear . please tell me what I do ?????
Unless the instructions on this page are followed when creating an account : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method - Apple Support…
then credit card details will need to be entered before the account can be used to download any item from the store.
If you are being prompted to review the account then you could see if this post by mountaingoatgirl lets you do so without needing to enter credit card details : https://discussions.apple.com/message/24303054#24303054
If not then you will either need to enter your credit card details (you should be able to remove it after entering it), or create a new account (and use the instructions on the above link when creating it). -
Ever since I upgraded to OS X, the padlock does not appear on my screen when I make purchases.
Is there a way to get it back on the screen?
Thanks
jtAdding my fix to this thread from: https://discussions.apple.com/thread/3190067?start=15&tstart=0
I just got SAM working on my iMac running Lion.
Use Pacifist to force an install of JavaForMacOSX10.6Update5.pkg (http://support.apple.com/kb/DL1360) then install the JavaForMacOSX10.7.dmg (http://support.apple.com/kb/DL1421) on top of that. Copy the Safari 5.0.5 from a SL machine or use Pacifist to extract the app.
Still does not run under 5.1 but at least I have a working solution. Let me know if anyone needs help. -
SPOOL DIALOG DOES NOT APPEAR WHEN NO_DIALOG = SPACE
The control parameters that allow the spool dialog popup to appear work when executing directly from MB90, but when executing from MIGO, the spool dialog popup does not appear. The print output is occurring without giving user option to change spool dialog entries. The desired outcome is to have the spool dialog popup appear when executing IM transactions and our output type is WEE4 to allow user input prior to printing.
See below for code:
FORM CALL_GR_SMARTFORM.
TABLES: LTBP,
QAMB.
DATA: LV_LTBP TYPE LTBP,
LV_SFORM_NAME TYPE SFORM,
LV_FM_NAME TYPE RS38L_FNAM,
LV_MESS TYPE STRING,
LT_OUTPUT_OPTIONS TYPE SSFCOMPOP OCCURS 0 WITH HEADER LINE,
LT_COPIES LIKE MSEG-MENGE,
LT_CONTROL_PARAMETERS TYPE SSFCTRLOP OCCURS 0 WITH HEADER LINE,
LV_MATERIAL_TEXT TYPE MAKT,
L_CX_ROOT TYPE REF TO CX_ROOT.
SELECT SINGLE * FROM MAKT INTO LV_MATERIAL_TEXT
WHERE MATNR = MSEG-MATNR AND
SPRAS = 'EN'.
IF mseg-werks = '0050' AND NAST-KSCHL = 'WEE2'.
LV_SFORM_NAME = 'ZZEBRA_GRSERVLBL'.
ELSEIF mseg-werks = '0050' AND NAST-KSCHL = 'WEE4'.
LV_SFORM_NAME = TNAPR-SFORM.
LT_COPIES = MSEG-MENGE.
ELSEIF MKPF-VGART = 'WQ' AND MSEG-BWART = '321'.
IF MSEG-ZEILE <> '0001'.
RETURN.
ENDIF.
SELECT SINGLE * FROM QAMB
WHERE MBLNR = MSEG-MBLNR AND
MJAHR = MSEG-MJAHR.
IF sy-subrc = 0.
SELECT SINGLE * FROM LTBP INTO LV_LTBP
WHERE QPLOS = QAMB-PRUEFLOS AND
MATNR = MSEG-MATNR.
ENDIF.
IF sy-subrc = 0.
SELECT SINGLE * FROM LTBP
WHERE TBNUM = LV_LTBP-TBNUM AND
MATNR = LV_LTBP-MATNR AND
MBPOS = LV_LTBP-MBPOS AND
ELIKZ = '' AND
BESTQ = ''.
ENDIF.
LV_SFORM_NAME = TNAPR-SFORM.
ELSEIF mseg-bestq = 'Q'.
SELECT SINGLE * FROM LTBP
WHERE LGNUM = MSEG-LGNUM AND
TBNUM = MSEG-TBNUM AND
TBPOS = MSEG-TBPOS.
LV_SFORM_NAME = 'ZZEBRA_GRQMLABEL'.
ELSE.
LV_SFORM_NAME = TNAPR-SFORM.
ENDIF.
LT_OUTPUT_OPTIONS-TDIMMED = NAST-DIMME.
LT_OUTPUT_OPTIONS-TDDELETE = NAST-DELET.
LT_OUTPUT_OPTIONS-TDDEST = NAST-LDEST.
LT_OUTPUT_OPTIONS-TDDATASET = NAST-DSNAM.
LT_OUTPUT_OPTIONS-TDSUFFIX1 = NAST-DSUF1.
LT_OUTPUT_OPTIONS-TDSUFFIX2 = NAST-DSUF2.
LT_OUTPUT_OPTIONS-TDARMOD = NAST-TDARMOD.
LT_OUTPUT_OPTIONS-TDCOVER = NAST-TDOCOVER.
IF sy-tcode = 'MB90'.
LT_CONTROL_PARAMETERS-NO_DIALOG = SPACE.
ELSE.
LT_CONTROL_PARAMETERS-NO_DIALOG = 'X'.
ENDIF.
IF NAST-KSCHL = 'WEE4'.
LT_OUTPUT_OPTIONS-TDCOPIES = LT_COPIES.
LT_OUTPUT_OPTIONS-TDGROUP = 'X'.
LT_CONTROL_PARAMETERS-NO_DIALOG = SPACE.
ENDIF.
APPEND LT_CONTROL_PARAMETERS.
APPEND LT_OUTPUT_OPTIONS.
**To get Function Module Name
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = LV_SFORM_NAME
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = LV_FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CATCH CX_FP_API INTO L_CX_ROOT.
LV_MESS = L_CX_ROOT->GET_TEXT( ).
MESSAGE LV_MESS TYPE 'E'.
ENDIF.
To call SMARTFORM Form
CALL FUNCTION LV_FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = LT_CONTROL_PARAMETERS
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = LT_OUTPUT_OPTIONS
USER_SETTINGS = SPACE
po_item = ekpo
mat_text = LV_MATERIAL_TEXT
mat_doc_item = mseg
mat_doc_post = mkpf
QM_INSP_LOT = ltbp
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " call_rm07etikett_smartfoHi azman1437.
I see that since an update you haven't been able to scan with your Deskjet 3050A. I try to help with this.
I would suggest by starting with an uinstall/install of your software. Something may have changed how the software is loading on the computer when you attempt to scan.
The other option, is looking for the HPscan application.
Where this is located depends on your computers operating system. To help with that would need to know the OS of the computer.
I hope this helps, thanks for your post.
I worked on behalf of HP. -
IN FBCJ REVERSED DOCUMENT DOES NOT APPEAR
Dear Sir
We cancelled a document in fbcj. But cancelled document does not appear in fbcj. Although there is a red cross mark by the side of the document. Today's payment balance dose not change. In Corresponding Expense ledger the document is posted. Follow on document show that cash is reversed (exp ledger sing and cash ledger 200200 sign. but this document does not appear in fbcj.
Tried to revers the revers document but msg given " it is already reversed".
Please help to resolve this problem
With regards
NileshHi Nilesh,
Check mentioned note carefully ! It would rectify the balances of both companu code.
1309577 - FBCJ: Incorrect balance in cash journal - report RFCJ1
Read above note & run the program it would rectify the problem. If same balance mismatch error persist ,check mentioned notes
1727842 FBCJ: Continued problems with TCJ_BALANCE / balance
Regards
Mani Kumar -
The check number does not appear on the top right hand corner of check
Hi
Friends,
I posted an Invoice (FB60) and did payment through F110, But cheque no. is not displayed, when i have given print preview/print. or T.code SP01.
My configuration is correct in FBZP say....
1. Payment methods in company code ZLF_PRENUM_CHEC1
2. Payment method in country ZF110_US_AVIS
(Q) How to get the cheque no. When I do invoice and payment?
(Q) The check number does not appear on the top right hand corner of check as it should in the print check layout and does not appear in the check number box?
AnilGo to this address: http://mycroft.mozdev.org/search-engines.html?country=AU
Item 24 lists 3 installable major search engines for Australia.
You can also restrict your search in Google by including ''country:au'' or ''location:au'' or ''city:perth'' (for example) in your search terms. Example: ''city:sydney plumbers'' in the Google search box will list plumbers in cities named sydney. -
When I complete all the steps to create Apple ID.In part that requires the credit card i dont have credit card and the option none does not appear.What can I do?
Greetings anabeqiri,
Thank you for contributing to the Apple Support Communities.
The advice and steps in this article may help if you don't see "None" as a payment option when creating your Apple ID:
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
All the best,
Jeremy -
The bookmark box does not appear, bookmarks straight to the bottom of the list
When I use the Bookmarks menu at the top of the page, hit Bookmark this page, the little box that USED to popup to assign what catagory folder the bookmark is to go into, does not appear.
the page is bookmarked, but goes on the bottom of the list, instead of into a catagory folder.
Having MANY catagory folders, I am forced to scroll down several times to see the book mark!
JUST started doing this when Firefox updated to 3.6.
Any fixes for this?Hello.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone. -
Check number confirmation window does not appear and checks become confirmed automatically
We have updated to SAP 9.10.105 PL 00,
and we have two issues with check printing, first when we print check we do not receive a confirmation window and all of the checks show as being confirmed. as soon as be print checks in the payment wizard after the checks have printed we than get an error message.
"no matching records found 'checks for payment' (OCHO) (ODBC 2028) [message 131-183]
the second problem is if I set over flow to blank paper, it will only print one check at a time, and i still do not receive a confirmation window.
I am not sure if the original patch for 8.8 was left out of the 9.1 release.Thanks for this, I found this after posting a message with SAP Support. Just a heads up, they consider it as 'Consulting' function not an 'Application Error' so they will not be a fix. We'll just need to know to make sure users know to un-check this Box.
SAP Note: 0001422688 - Print on Blank Paper checkbox on Checks for Payment
Symptom
Scenario 1:
Check Number Confirmation window does not pop up after Checks have been printed.
You might receive the following error message:
'No matching record found 'Checks for Payment' (OCHO) (ODBC-2028) [Message 131-183]'.
Scenario 2:
User is not able to print batches of Checks either via Payment Wizard or via Document Printing and
the Cheque Number Confirmation window does not pop up.
Cause
Consulting
Solution
The issue could be resolved by uncheck Print on Blank Paper on Banking -> Outgoing Payments ->
Cheques for Payments
'Print on Blank Paper' setting on Checks for Payment is saved per user
SAP Note: 0001059752 - Printing Checks for Payment Skipping the Confirmation Screen
Symptom
Check Number Confirmation window does not appear and the check automatically get confirmed.
Reproducing the issue
Scenario:
Print a Check for Payment Via Document Printing or Directly for the Check for Paymet screen (under
Banking > Outgoing Payments)
Expected Results:
The Check Number Confirmation screen pops-up.
Actual Results:
Check Number Confirmation screen is skipped
Cause
Consulting
Solution
If the option 'Print on Blank Paper' is ticked, the Checks Number
Confirmation window will not pop-up.
Go through the following steps and check the settings:
1. Go to Administration -> System Initialization -> Print Preferences -> Per Document tab,
Document: Check for Payment. Check if the option 'Print on: Blank Paper' is ticked.
2. In Check for Payment document check whether the tick box 'Print on Blank Paper' is ticked.
3. Go to Administration-> Setup-> Banking-> House Bank Accounts. Check in the 'Paper Type' column
if the option Blank Paper is chosen. -
ITunes proxy authorisation window does not appear (and account is being blocked randomly)
Many users have iTunes installed on their PC. iTunes requires proxy authorization to connect to internet. Appropriate popup window appears when opening iTunes and trying to open some internet-based page there. Entering current AD account credentials helps to connect. There is also a checkmark there allowinf to save credentials for further use (and do not show this window anymore). When AD password is changed - this popup window does not appear again and user's account is being blocked (because iTunes tries to connect proxy with old credentials). The question is: is it possible to reset proxy settings, stored somewhere inside iTunes somehow? Just to return proxy authorization window back. Did you have such an experience? If you caould share any knowledge - it would be great.
What happens if you go to iTunes > File > Devices, do you get the option to Sync iPhone?
You could try a reinstall of iTunes. OS X Yosemite: Reinstall apps that came with your Mac -
HT3867 I am connected to the hotel wifi network, but the login screen does not appear.
Hi,
I am connected to my hotel wifi network, but the login screen does not appear. I am able to access the login page on my PC, but on the iPhone it does not appear and just tries to connect to the webpage (e.g. google.co.uk), and eventually gives up. I've tried opening pages in Safari and Chrome, but none cause the login screen to appear. I have also tried trying to log into the login page that the PC opens when connected to the wifi, but the same thing happens. I am using a iPhone 3G with the latest iOS version 6.0.1.
Is there a way to make the iPhone try to open the login page?
Ben.I have the exact same problem as the original poster and I tried many times already the solution proposed by trstark66 and it's still not working. It's not working for both my iPad and iPhone 5. I'm using the latest iOS version available all the time. I have my iPad since 3 years and my iPhone since 1 years and I always had that problem. I'm an airline pilot so I'm always in hotels. I asked my colleagues who also have iPhones and iPads and they all have the same problems from time to time. And when I go in an apple store they all say that it's the first time they hear about that problem. I never have that problem with my PCs, my previous phone and my BB playbook. Only with my iPhone and iPad....since now 3 years...Always the same problem. I'm connected to the Hotel Network, I have an IP address but nothing popup to register with a user name, password or just to access the "I have read and accept the condition.../connect". And when I go in Safari or other Browsers, I am not redirected to a login page. All I have is a message saying cannot access the webpage because I'm not connected to Internet. I tried already hard resets, on/off Wi-Fi, automatic connexion off, forget this network, reset network setting...
My solution for now is to use my Boingo account. I connect to the hotel Network and then I use the Boingo app to connect to Internet.
But, sometimes it works the first time or suddenly for no reason.
Very funny, I was using Boingo on my ipad to write this message in my Hotel room because I was unable to use my free connection as usual. When I tried to press "Add Reply" it failed and I had the message "An error occured while trying to submit your post, please try again". The reason was that boingo was disconnected since I was taking too long to write this message. So I wasn't connected to Internet anymore. I opened a second tab in Safari and what did I see!... the login page to access the free connection from the hotel. This is crazy. Apple, you really suck with hotel/coffee hotspots... I tried for hours and nothing, now hours later I just open a new tab and it works. But tomorrow I know I will try the same and it will not work again. It shouldn't be that complicated.
Maybe you are looking for
-
Is there a way to remove a page from my old iwebsite after I upgraded to iCloud?
I already "upgraded" from MobileMe to iCloud. Before I did that I wanted to reduce my iWebsite to just 1 page, so I made the changes with iWeb and after the new (final version) of my site was up and confirmed, I made the switch to iCloud. HOWEVER, I
-
What is cannot be resolved to a type error?
When i run jsp programs, am getting : org.apache.jasper.JasperException: Unable to compile class for JSP An error occurred at line: 6 in the jsp file: /dbcoffee.jsp Generated servlet error: CoffeeQBean cannot be resolved to a type org.apache.jasper.c
-
Elantech Touchpad Issue/Confusion on Fresh Install
This machine is an Acer Aspire 5253-BZ660. I use this machine exclusively for running Mixxx (the linux dj application) which I use professionally. On my first go at trying Arch, everything worked well. I was more than pleased. However I experimente
-
Duplex printing on officejet could only be set to short-edge binding
My 6700 officejet could only print on two-side with short edge binding even when the dault preset is set to long-edge binding. I have tried everything. Something is overriding the duplex setting and I can't figure out what. Please help.
-
Library on EHD - really?
I thought I made a smart move to get my libraries on a 500GB external hard drive and I am kicking myself for doing so. I have turned off previews and the app is painfully slow. If I click on any project or album with more than a 10 images in it, the