Payment Term Issue while cancellation of Invoice.

Hi,
A sales order is created with a Payment term "xxx" which has 2 days credit limit for the customer for Payment.
and Billing is done for the same for Example on 16th Feb 10, and the Due date captured on Billing document and as well on accounting document for reciept is 18th Feb 10 taking 2 days credit, and when the Billing document is cancelled on the same day i.e 16th Feb10, it shows the payment term date on billing document as 18th Feb10 but in the accounting document it is capturing 16th Feb10 as the Payment date.
Hence it is showing due for payment to customer before collection of the money.

Hi,
Thanks for your reply. I was really required to bypass SAP's standard logic for entering that field "ref_doc_no" for new invoice after cancelation of old invoice.
Scenario : While cancleation/reverse of every sucessful invoice,
SAP's standard => For new invoice document (of cancelation old invoice) is with field "ref_doc_no" = X + Old invoice Ext number
Custom requirement : For new invoice document (of cancelation old invoice) is with field ref_doc_no = Old invoice Ext number + X
with those BADI's, how it can be done?
Thanks,
Rahul Mandale

Similar Messages

Issue while cancelling Commercial invoice

Hi All,
I have a requirement from the business to check the excise invoice.
if the Excise Invoice Doc (Created using J1IIN) is present and if so should not allow the cancellation of the Commercial Invoice .
I think we need to use user exit for the same. Could you please help me which user exit i can use to complete my requirement?
Thanks in advance..
Regards,
SK

Hi,
Pls check following user exits..
RV60AFZZ
ZXVVFU08
Regards,
Srikky

Assign CO object error while cancelling excise invoice

Dear Gurus,
I am getting following error, while cancelling excise invoice. I was able to post the excise documents without this error.
Account N870 requires an assignment to CO object. Message no.KI235
Kindly help me to resolve this issue.
Regards
Ranga

If you click on the long text of your error message, you will see an explanation of how to fix the error there.
Or just put an entry into table OKB9 for the GL Account N870

Issue while posting the invoice in background using the WF-BATCH user

Hi Friends,
I am facing an issue while posting the invoice in background using the WF-BATCH user. I am using a invoice approval workflow where in when the approver approvers the invoice the invoice document get posted using a background method, which uses BO FIPP and Method POST and i am returning the Message Text to my workflow container from this method. When i see the log an exception is rasied from this method with an error message "V004: You are not authorized to change this document", but WF-BATCH is having SAP_ALL and SAP_NEW authorizations. If i try to post the invoice using the method from my user id it is getting posted. What could be the issue. Please advice.

Hi Sapient,
The Parameter, Roles would be different for the LOGIN USER and WF-BATCH.. So ask your administrator
to set the Roles & Parameters similar to that of LOGIN USER to WF-BATCH.
For further refrence check in SU01 giving the LOGIN USER and then check with WF-BATCH... you would
find the difference...
Hope this would help you..
Good luck
Narin

Get indicator while cancelling an Invoice

Hi Experts
While cancelling the invoice VBRK-FKSTO is not 'X' in RV60AFZZ. VBRK-FKSTO changed to X after execution of RV60AFZZ.So suggest some alternative to derive some indicator or flag for cancellation of an invoice before we click on the save button.
Thanks in Advance!!!

HI ,
I am trying to get the indicator via user exit RV60AFZA, but unable to identify what indicator of XVBRK can be used for this.
It would be great help if you can provide me the exact logic .
Thanks & Regards,
Saurav

BADI while Cancellation of Invoice in SRM5.0

Hi,
I need to fill some own data while cancellation of invoice. Which BADI will be suitable for it?
e.g. I need to fill field REF_DOC_NO (Inv (ext) number) data for canceled new invoice with own logic instead SAP's standard one. Currently SAP is filling X in front of original invoice's field data for every cancellation of invoice.
How could be done for it?
Thanks in advance.
Rahul Mandale

Hi,
Thanks for your reply. I was really required to bypass SAP's standard logic for entering that field "ref_doc_no" for new invoice after cancelation of old invoice.
Scenario : While cancleation/reverse of every sucessful invoice,
SAP's standard => For new invoice document (of cancelation old invoice) is with field "ref_doc_no" = X + Old invoice Ext number
Custom requirement : For new invoice document (of cancelation old invoice) is with field ref_doc_no = Old invoice Ext number + X
with those BADI's, how it can be done?
Thanks,
Rahul Mandale

Error while cancelling the Invoice

Dear Gurus
The Billing document was raised on a wrong customer on may month. Now that was realized, and that invoice was canceled but wrongly the date was given as may month. The FI period was closed for may month and the current period is july. So they canceled the canceled invoice. Now while trying to cancel the original invoice in VF11, the system continues to say 'the invoice was already cancelled'.
How to cancel the invoice?
Kindly help
Regards
Gansub

Hi,
This is typically a process issue. There are a few things I think you can do...
a. If the invoice has reached customer already (bcoz it was raised in the month of May), then, as you now cannot cancel as there has been a lot of wrong entries, you an create a credit memo either from SD side or from FI side so that the customer a/c is balanced and it will not show any AR balance.
b. Raise a debit memo request against the right customer and invoice it.
I think you have to work with your Finance people to be in concurrence before you take up he above process.
Thanks
Mukund S

Payment Terms for Differential ( Final Cycle ) Invoice

Hello everyone
I am looking for input based on experiences and best practices
Here is requirement
SD Diffrerential Invoicing been implemented in our SAP system. All works fine.
Provisional Cycle created based on Formula Provisional Rules, once Final price is determined Differential(Final Cycle ) invoice is generated. No issues. Business woudl like Provisional Invoice to be due according to Customer Payment terms but when Differential is created they want it to be due immediately.
i.e. Provisional OID1 Billing Date = Base Line Date = Jan 15th Payment Term 10 day with 1% cash Discount
Final OID2 Billing Date = Base Line Date = Jan 31st ( that's when final price is available as monthly average ). They want this invoice to be due next business day ( not to wait another 10 days )
Is there way substitute payment tewm for differential invoice? I do not like an idea to overwrite/backdate billing/baseline date as customer receives invoice only on Jan 31st, Just need it to be due next business day ( Feb 02 in this case )
Any suggestions/directions greatly appreciated

Hello.. Thanks for your feedback.
But in IV, normally due date is calculated from baseline date. Base line date will be defined by IV creation/posting date (Based on IMG setting). So by making the START Date for invoice Plan as Past Date will not work.
SS

GR based BAPI_INCOMINGINVOICE_CREATE payment terms issues!!

hello friends,
I am using BAPI_INCOMINGINVOICE_CREATE for posting of
GR based Invoice verification (Alternation to MIRO).I am able to post the document through
BAPI if and only if ::-
1) i specify payment terms(PMNTTRMS in header data of BAPI) in coding
or
2) if my purchase order contains payment terms .
I have some issues using this BAPI::
1) i want to post BAPI for purchase orders and vendors which doesn't have
any payment terms , in this case BAPI gives and error message "specify correct payment terms"
Current SAP version is SAP4.7 enterprise with SAP_APPL at 23 number
Looking forward for response
Points will be assigned

hello friends,
I am still looking for good response.
Regards
jase

Payment Terms in Third Party Sales Invoice.

Hi Experts,
We are facing the problem in third party sales process.
Suppose X is our customer and Y is our vendor, here Y is supplying the material directly to X and Y sending us the bill of entry and other documents to us, and then we create the sales invoices to X, we are following all process like first we create SO to X then with the PR we create PO to Y then we do migo and miro of vendor invoices then creating the sales invoice to X.
The main problem is that we want that the payment due date to our customer invoice starts from the vendor bill of lading date which we enter at the time of migo and miro (document date), but in our system, in sales invoice to X, system is calculating payment terms which we have entered in the customer master of X.
How to get above functionality activated in sap.
Regards
Rajeev Gupta
Message was edited by: Rajeev Gupta
Please somebody reply.

Can somebody reply this query.
Thanks

Accessing Selected Value from Payment Terms (Item 47) in AR Invoice Form

Hi,
Have just started working in SAP Business One and SDK adn would really appreciate any help I could receive.
I'm trying to access the selected value from Payment Terms field(Item 47) in the AR Invoice Form.
Have successfully managed to do this against Customer Code field using the following code-:
Private Sub eventHandlerTest(ByVal FormUID As String, pVal As SAPbouiCOM.ItemEvent, BubbleEvent As Boolean)
    Dim frm As SAPbouiCOM.Form
    Dim itmCustomer As SAPbouiCOM.Item
    Dim edtCustomer As SAPbouiCOM.EditText
    Dim itmRemark As SAPbouiCOM.Item
    Dim edtRemark As SAPbouiCOM.EditText
    Dim FieldNo As String
    Set frm = SBO_Application.Forms(FormUID)
    Set itmCustomer = frm.Items(pVal.ItemUID)
    Set edtCustomer = itmCustomer.Specific
    If UCase(edtCustomer.Value) = "CALECH1" Then
        FieldNo = "16"
        Set itmRemark = frm.Items(FieldNo)
        Set edtRemark = itmRemark.Specific
        edtRemark.String = "E"
    End If
End Sub
However when doing the same thing for Payment Terms I get the error "Run-time error '13': type mismatch" on the line
Set edtOrderType = itmOrderType.Specific
Thanks

Hi,
On the new invoice's form item 47 is ComboBox and I guess it's stay in the same type when you open existing invoice. So try to work with this item like with ComboBox. But if you need only get some information about existing invoice, you don't need to fork with the screen objects - you can get all you need from the DI Document object. Open Document object with Invoice type, find invoice and check PaymentGroupCode property.
Best regards,
Mark

Payment terms issue.

Hi,
Payment terms is maintained in Vendormaster and got copied when created PO but when invoice is made payment terms field is zero, Can someone please tell why?
Regards
Arun

Hi Arun
U can maintain Payment terms in VM in Payment trnx. accounting view and in Purchasing data
Check where did u maintain Payment terms
U need to maintain it in Payment trnx. accounting view as it is at company code level
Vishal...

Value in payment terms field not dispalyed in invoice after saving MIRO

Hi,
I Implemented the BADI- MRM_PAYMENT_TERMS to populate GR date as baseline date in invoice,
But after saving the invoice when I display the invoice document in MIR4 it not showing the payment terms. It only show the condition ie the discount get in no of days. It show
payment terms - (Blank)
Payment in - 14 days 4%
payment in - 30 days 2 % .
Can anybody help me on this why this peculiar behavior of transaction after activating BADI.....
Regards,
Aditya
Edited by: Aditya rayalu on Jan 28, 2011 7:37 AM

Hi,
have a look at this OSS Note:
Note 432332 - MIR4 - Field ZTERM is not filled
https://service.sap.com/sap/support/notes/432332
Best regards.

Payment Terms issue(for different divisions)

Here our business is Distribution...
We take order from customer (SO)....we place order to vendor(our Pricipal vendors we have 7 vendors) (PO) and deliver the goods to customer.....
we treat that different principals as Division...........
For each customer for one div there will be one payment terms.....if i need to have different payment terms for one customer.
what should i do.............
Pls suggest me....

Hi,
Please tell me how many sales areas are there.
If there are 7 sales ares then while maintaining price condition records in VK11, you can maintain payment terms while maintaining condition records for the specific sales area.
Check in VK11 by using standard condition type PR00.
You can include sales document type field also and maintian price condition along with payment terms.
Hope this helps.
Regards,
Sharan

Customer payment terms issue

Hi I need one urgent solution
In customer master data the payment terms is znz8 which is due 20th of the following month.
But they want it if we do invoice 11/06/2008(today) the due date shpuld be 11/07/2008.
for that in customer masta we need to change know? is this require TP (transport) Movement from development to quality and then move to prodn?
or directly we can change in production in customer master data? is this done by FICO consultants or SD consultants
if settings to be done where we do the settings for the payment terms?
Kindly dothe needful

Hi,
If the required terms are already configured in the system and are available in Production, then it is just a master data change. You need not transport the same. In production environment, the master data changes are generally done by the business teams. Alternatively, either the FI or SD consultant can do it, but you need to ensure that the terms are updated in both Finance and SD views.
If the required terms are not available, then you need to create the terms and transport them to Production.
Assign Points accordingly.
Thanks,
Madhav Nanduri

Payment Term Issue while cancellation of Invoice.

Similar Messages

Maybe you are looking for