Payroll Error:  Retirement earnings may not exceed Gross Remuneration

Hi guys,
I get the following error message when i run my payroll...Retirement earnings may not exceed Gross Remuneration. Any suggestions as to how i can solve this problem? Would be appreciated.
thanks.
Lynnette

Hello Lynnette,
There are certain wage types in your payroll not cumulated to /101 (Gross cumulation) but /102 (401K Gross which is retirement gross).
As Howard said, go to RPDLGA20 and look for those wage types and their cumulation class.
Arti

Similar Messages

  • Retirement earnings may not exceed Gross Remuneration

    Hi guys,
    I get the following error message when i run my payroll...Retirement earnings may not exceed Gross Remuneration.  Any suggestions as to how i can solve this problem?  Would be appreciated.
    thanks.
    Lynnette

    Lynnette,
    You may have some cumulation errors in the wage types, especially /101. You can check this with the Wage Type Utilization Report (Transaction Code PC00_M99_DLGA20). On the control screen, be sure to fill in the country code and date. Then, darken the radio button beside the output type u201CContinuous listu201D.
    Howard

  • Annoying error 2:  ViewController may not respond to -enableBBI

    Developers,
    This is my second annoying error. The code works fine, but i get the following error message when i run the app "viewcontroller may not respond to -enableBBI".
    The code i am using is below and i have placed ///Error/// next to parts of the code that trigger the error. The part of the code that shows an error is used to enable a Bar Button item.
    Is there anything i can do to prevent this? or does it not really matter?
    Ray, i am hoping you will have a quick glance over this. The code is something you gave me in the past. Perhaps you have a solution?
    james
    -(IBAction)NextItem {
    int count = [flashCards count];
    if (counter < count - 1) {
    NSDictionary *nextItem = [self.flashCards objectAtIndex:++counter];
    Label1.text = [nextItem objectForKey:Question_KEY];
    [self enableBBI]; ////Error//////
    -(IBAction)PreviousItem {
    if (counter > 0) {
    NSDictionary *nextItem = [self.flashCards objectAtIndex:--counter];
    Label1.text = [nextItem objectForKey:Question_KEY];
    [self enableBBI]; ////Error//////
    - (void)enableBBI {
    int count = [flashCards count];
    next.enabled = counter < count - 1 ? YES : NO;
    prev.enabled = counter > 0 ? YES : NO;
    flip.enabled = count > 0 ? YES : NO;
    Message was edited by: james_coleman01

    See xnav's suggestion, then add the following at the end of the file and move enableBBI inside:
    @implementation YourViewControllerName (PrivateMethods)
    - (void)enableBBI
    @end
    Using categories in this way is just a trick to simulate private methods in Objective-C. That way, you can define your methods where you want in the file without having to put them into the header file for all the world to see.
    You can create new categories for any class, including Cocoa classes like NSString, etc.
    Message was edited by: etresoft

  • Retirement earnings .... Gross Remuneraration

    Hi Gurus,
    I got a problem in salary packaging: when i run a report i got the error message like Retirement Earnings may not exceed Gross Remuneration. where i gone wrong. What should i do to rectify this error.
    Regards
    vickynaigan.

    Lynnette,
    You may have some cumulation errors in the wage types, especially /101. You can check this with the Wage Type Utilization Report (Transaction Code PC00_M99_DLGA20). On the control screen, be sure to fill in the country code and date. Then, darken the radio button beside the output type u201CContinuous listu201D.
    Howard

  • Accessory may not be supported error and charging issues with iphone4

    Hello,
    From past 2 weeks my Iphone4 (say A) keeps throwing error message "Accessory may not be supported" and doesn't charge the iphone after couple of minutes of charging. This happens when device is connected (for charging) to power outlet or to computer (USB port). I tried multiple original iphone/apple cables.  The same cable allows me to copy pictures from this device/Iphone4 when connected to computer via same USB cable, but the device/iphone4 does not charge. The same cable and charger charges my other Iphone4 (say B) perfectly fine. 
    I am really frustrated as to why this is happening.
    Searching on internet, it seems lot of people are facing this problem with their iphones and ipad devices and refer this issue as a software bug, which I also seem to think. How can it be the hardware issue when same charging port and same cables allows you to copy your pics etc. from your iphone device to your laptop but does not allow you to charge the same device? Same charging cable works with my other iphone4 and i tried multiple cables so I dont think it's a cable issue.
    Any help is appreciated. I was expecting apple products to be better in quality but lately I have seen this issues quite often.
    -RP

    Make sure you are using an Apple approved charger and cable.  The best would be the charger and cable that came with the iPhone in the original box.

  • [MX 2004} Can't upload! The file may not exist, or there could be a permission problem

    I'm running MX 2004 on Windows XP. All's been well for the
    last few months, doing site maintenance at this part-time job. I
    get tangled up a bit in checking files in and out, coming from
    GoLive, and since there's no one else with FTP access, yesterday I
    told it to check the entire site in. I didn't have any changes I
    didn't want to commit, and I figured that would keep things a
    little neater.
    As of today, I can post revisions to existing pages, or
    resize image files, but when I create a new page, or try to place a
    new image file on an existing page, I can't upload it.
    So, to be clear: I have two pages already up on the site,
    index.html and apple.html, with a link between them. If I create
    new page banana.html and make a link to it from index, index.html
    will upload that revised link, but banana.html is refused with the
    message
    FTP error: The file may not exist, or there could be a
    permission problem
    I know the file doesn't exist (remotely); I just made it.
    I've gone to Prefs and disable Check In / Check Out, which didn't
    do me any good. What next?

    Can you open the FTP log, select one of these new files and
    upload it- then
    cut and paste relevant part of the ftp log?
    Also- does this site have a "host directory", a subfolder
    that your public
    files need to go into? If yes- is this folder listed in the
    host directory
    line of the remote server info?
    And odd past thing i've seen-
    Had hosting that used public_html as the public folder name.
    They also had a symbolic link named www that pointed to
    public_html
    Could upload/download existing files with www in "host
    directory" line of
    dw; but could not upload new files or work with files in
    subfolders.
    changing to public_html instead of the www symlink fixed this
    for me.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Function 'myfunc' may not be used in SQL Options

    <p>
    Hello,
    I have created a simple function in a packege for use in an update statement. The function is
    FUNCTION myfnc(p1 IN t1.c1%TYPE)
    RETURN VARCHAR2
    IS
    BEGIN
    IF p1 = 3 THEN
    RETURN 'A';
    ELSE
    RETURN 'B';
    END IF;
    END myfnc;
    I use it in a procedure which exists in the same package as the function as follows
    Update t1
    set c1 = myfnc(c2);
    I am getting the compliation error Function 'myfunc' may not be used in SQL.
    There is no db manipulation going on and I have tried using
    PRAGMA RESTRICT_REFERENCES (myfnc, WNDS, WNPS, RNDS, RNPS);
    but to no avail.
    One other thing is that I thought this was compiling OK but then I decided to put the function in the package specification so I could unit test it using a db call. Now if I drop and recreate the package without the declaration in the specification the compile error still occurs. Perhaps that's my mind playing tricks but maybe there is something here I am not aware of.
    Any suggestions?
    </p>

    Hi,
    You found the solution.
    Although it's allowed to say
    Update     t1
    set     c1 = local_var;in a package, where local_var is not defined outside of the procedure, let alone the package, and
    although it's legal to say:
    local_var = myfnc (some_other_var); inside the package where myfnc is a private function (included in the package body, but not in the package header), still
    it is not legal to say:
    Update     t1
    set     c1 = myfnc (c2); If there is a problem with putting myfnc in the package header (for example, you don't want people calling it directly, for some reason), you can make it a stand-alone function, like Someoneelse did, or put in a different package, and give the owner of your first package (and no one else) EXECUTE privileges on it.
    As William pointed out, if myfnc is really this simple, you might not need a function at all.

  • Function name_function may not be used in SQL

    Dear forums,
    when i compiled my form that contain the function package, i got the error "Function <name_function> may not be used in SQL". But when i execute the function from sql plus, it works smoothly.
    What's the solution ?
    with great thanks,

    Hi Salim,
    as far as I understand you you try to use a function that is stored in the form. The select statement is worked on the database where your function is not known. You have to create this function on the database as you did it for using in SQLPlus.
    Regards,
    Werner

  • "Partner function may not be changed"

    While trying to change the "responsible employee" of an already released contract, system gives an error "Partner function may not be changed". Can anyone help me with this issue....

    Hi
    This message " Partner functions may not be changed " you are getting because
    you are not allowed to do change your PO .
    So try to have full authorization for doing this operations.You can maintain this in Personalization Tab in Trasaction PFCG for the specific Role.
    Ask BASIS person to help you out.
    <b>Related link -></b>
    "Partner functions may not be changed"
    Regards
    - Atul

  • Function 'function name' may not used in sql

    Hi Guys,
    How to call a function in a form level trigger?
    i created a function in program unit.In timer expired trigger i tried to call a function as
    select sf1('a') from dual;Im getting below error
    function sf1 may not use in sqlAdvance thanks

    Hi,
    If you want to assign the return value of the function to a variable then you can try
    <variable_name> := sf1('a');Else, you can write
    select sf1('a') into <variable_name> from dual;Hope this helps.
    Regards,
    Manu.

  • ODI agent may not running

    dear all,
    odi agent test successfully, update the scheduling successfully but when pressing the scheduling information it give error
    "ODI agent may not running"
    kindly solve the issue
    regards
    Naseer

    Hi Ratish,
    Following are the things i did and things which are happening .. :)
    created a scenario and scheduled it.
    And from Topology Man.. Agent Window... clicked on "Update Scheduling"... Output is "Planning Update is Completed" and when i click on Schedule Information" it is throwing warning saying... "Unable to retrieve Agents Schedule"... and my scheduled job is also not executed at scheduled time.
    Any idea what could be the problem?
    Thanks in advance.
    Regards,
    Amar

  • This accessory may not supported by this phone

    i don't know what's happened to my phone, yesterday night when my phone was in the charge suddenly stop charging with this error" this accessory may not supported by this phone", i tired more than 10 other cable(the authorized one), it started charging but just until 4% and the same problem happening again " this accessory may ..." and stop charging, then today i took my phone to apple servis center and they said if doing pdate to latest IOS7 maybe it solve, but first they diagnosed my phone to see is there hardwere problem or not and see there is no hardwere problem and my phone and battery worked in fine state, then theyr tried to update that and my iphone5 charged to 17% and suddenly stop charging with same error, she said before this error appear, she got the error 3004, i dont know guys what can i do with this phone any more if someone can help me to solve this problem i'll too appreciated that. plz help me

    That message basically just means that Apple wishes you would only buy Apple products for your Apple products . I get that message all the time with my iPod dock. Just click OK and move on. As for the audio player - it may be broken.

  • [Solved] "source tarball may not contain nested subdirectories"

    Hey guys,
    I'm trying to upload (my first!) package to the AUR, however I'm getting the error "Error - source tarball may not contain nested subdirectories."
    I've created the package using `makepkg --source`, it's just a single PKGBUILD file.
    Running tar tvf looks fine:
    $ tar tvf setcolors-git-0.0.0-1.src.tar.gz
    drwxr-xr-x root/root 0 2013-08-17 08:25 setcolors-git/
    -rw-r--r-- root/root 685 2013-08-17 07:19 setcolors-git/PKGBUILD
    I searched around, but it looks like only a few people had this issue, and it was due to SELinx (which I'm not using).
    I must be missing something really simple and I'm sure I'll feel dumb.
    Here's the tarball in question.
    Last edited by EvanPurkhiser (2013-08-19 01:46:07)

    Ichimonji10 wrote:
    I'm also getting this error. The exact error thrown is:
    Error - source tarball may not contain nested subdirectories.
    I'm trying to submit this PKGBUILD: https://github.com/Ichimonji10/PKGBUILD … ybeans-git
    And here's the contents of my package:
    [ichimonji10@hardhack:tmp]$ ls
    vim-jellybeans-git-v1.5.25.gc173b85-1.src.tar.gz
    [ichimonji10@hardhack:tmp]$ tar tfv vim-jellybeans-git-v1.5.25.gc173b85-1.src.tar.gz
    drwxr-xr-x root/root 0 2013-08-17 11:55 vim-jellybeans-git/
    -rw-r--r-- root/root 1094 2013-08-17 09:08 vim-jellybeans-git/LICENSE.txt
    -rw-r--r-- root/root 1022 2013-08-17 11:39 vim-jellybeans-git/PKGBUILD
    Ahhh I get that too, your tar isn't the problem (I think), like mr. developer said, it's probably PHP5.5 that's the problem, it's the site.
    My theory is that PHP5.5 probably upgraded their parsing stuffs and the site's code just isn't compatible yet.

  • WORKFLOW PROBLEM Inherited elements may not be deleted

    Hi,
      I have created some workflow container element and now I am not using those variable and i wanted to delete those variables. When I try to delete those variables, the system gives me error
    "Inherited elements may not be deleted".
    My workflow is running fine without any error.
    But I wanted to delete the unnecessary variables. please let me know how can I do that.
    thanks
    Aman

    Aman,
    I think you have to delete this variable from the function or methods to the workflow containers. In this sequence.
    []'s
    Glauco

  • Payroll Error msg "The gross wages do not cover the negative offset that has been forwarded, therefore, no grossup is permitted".

    Hi Experts,
    I am getting the below error msg while running payroll for an US employee.
    "The gross wages do not cover the negative offset that has been forwarded; therefore, no grossup is permitted."
    I am getting this error msg just after USTAX function processing part of UTX0 subschema. I am highlighting below facts & findings for your reference.
    As per a client requirement,  I have configured a new gross up WT (ER benefit contribution) for a benefit plan (IT 0168) and the changes are in QAS system. The changes have to be reflected in period 20/2014 (4th May'14- 10th May'14) with retro effective 01/01/2014 as per the benefit plan record maintained from 01/01/2014.
    This error msg is coming only for few employees. In my example, when I am running payroll in period 20/2014 with forced retro as 01/01/2014, system is giving error in period 14/2014 (23rd Mar'14-29th Mar'14). When I checked the pay result of this employee for period 14/2014, I can see the /101 is in -ve value and there is claim generated for this period. So I think, eventhough, a value of $ 2.53 is getting added as per the IT 0168 record, its not helping to give a +ve gross value and thus tax is not able to recoved on the same.
    I hope you have come across this issue and can help me to assist to resolve the error msg.
    Regards,
    Prakash  

    If you have correctly configured payroll the system should automatically off set that and should create wage tyes /561 or /563 in RT.

Maybe you are looking for