Payslip on ECC6 using EP7 for country grouing 40

Hi,
My requirement is to create a Payslip in Smartform for country grouping 40.
For that, I have copied the International form in HRFORMS into country group 40. I was able to active 'ABAP Dictionary Structure' and 'SAP Smart form' but while activating the Print Program I getting an error in Program /1PYXXFO/ZTEST1_PAYR saying that cl_hr_pay_result_IN does not exit.
Since cl_hr_pay_result_IN is not available now I am trying to create the Payslip for grouping '99'. Here also I am getting an Error in print saying that field 'p_ipview' does not exit. I have searched the OSS notes but did not get.
If any body has worked on HRFORMS please help in solving the problem.
I am working on ECC 5.0.
Regards,
sameer

Hi,
I dont think it is possible to add digital signature in HR Form (PE51). Correct me if you find any solution.
Regards
Chandrashekar

Similar Messages

  • HT4314 Hello, I have an Iphone 3GS and can't connect to Game Center.  It recognizes my apple ID account, states it was never used with Game Center. Then asks for country, birthdate, then returns to ask country again, then birthdate, and returns to the loo

    Hello, I have an Iphone 3GS and can't connect to Game Center.  It recognizes my apple ID account, states it was never used with Game Center. Then asks for country, birthdate, then returns to ask country again, then birthdate, and returns to the loop. Never ends the loop unless I cancel the setup process.  I have restored the iphone to the factory settings and restored the backup, but did not work. Any suggestions on what can be the problem? thank you.

    I just read another post that says you can go into a game that allows for multiple players and utalizes game center and enter your account information that way.  I haven't tried it yet, but it seems to work for others that had this issue.

  • Error Message When Leaving Review For Apps Downloaded Using a Different Country App Store

    DEVICES AND SOFTWARE:
    iPhone 6 Plus iOS 8.1.2, Macbook Air 11" 2013 OSX 10.10.2, iTunes 12.1.0.50
    DESCRIPTION:
    When attempting to leave a review for an App that has been previously downloaded or purchased using a different country store but on the same Apple ID - the user receives an error message. The issue stems from the App not being in the Purchase History of the presently associated country store as purchase history is country dependent rather than Apple ID dependent.
    STEPS:
    1. Login the App Store on iTunes or iOS Device using an Apple ID associated with a country.
    2. Download an App for the first time using said Apple ID.
    3. Change the country of said Apple ID.
    4. Attempt to leave a review of the previously downloaded app.
    EXPECTED RESULTS:
    A user should be able to leave a review to an App he/she has previously downloaded whilst the Apple ID is associated with a different country. The App Store button should show Downloaded after the country change and the App should continue to be displayed in the Purchase history. In other words the purchase history should not be country dependent but Apple ID dependent.
    ACTUAL RESULTS:
    User gets an error message indicating that the app needs to be downloaded or purchased first.
    NOTES:
    I have tried deleting my reviews from the original country store, and yet I am still not able to leave a review. Please make the purchase history dependent on the Apple ID rather than the Country Store. If this is not possible, provide a way for users to remove to delete the purchase history from the previous country store(s) - so these apps can appear on their current country store's purchase history. Thus they would be able to leave reviews for these apps.

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple. If you want to leave feedback for Apple : http://www.apple.com/feedback/itunesapp.html

  • Do we need to be in unicode to use webdynpro for abap in ECC6 ?

    Hello,
    we study migration to SAPR3 46C SR2 to ECC6.
    a question is: Do we need to be in unicode to use webdynpro for abap in ECC6 ?
    Our SAPR3 are in non unicode
    thanks

    The problem, if you backend system is not unicode, can be, that user with the browser accessing the Webdynpro page, can enter data of any codepage (because browser is Unicode), the data will then be stored with a wrong codepage in the system and will be destroyed.
    Additionally all successor versions of ERP will be Unicode only.
    And on top of that, if you plan to use Java components (such as a portal), the backend must be Unicode (see Note 975768 - Deprecation of Java features with non-Unicode Backend).
    Markus

  • ESS 50.4 and MSS 60.1.20 for R/3 4.7 using EP7.0 and external ITS 6.20

    SAP@WEB studio
    Hi All,
    we are implementing ESS 50.4 and MSS 60.1.20 for R/3 4.7 using EP7.0 and external ITS 6.20.
    1).
    first of all is this landscape possible ?
    2).
    If it is possible then do i need SAP@WEB studio along with the external ITS ?
    3).
    once i install external ITS what are the stpes to be followed next ? i mean how can i connect to r/3 from the portal using the ITS ?
    thanks and regards,
    PK

    PK,
    Please see the ITS Administration guide and the ITS Installation guide.
    You will see that when you install the External ITS you will be asked for R/3 connection information, such as logon group, hostname, system name, system number, message server, depending on what connection method you choose. 
    As for connecting the External ITS to Portal, as I stated, you will create iViews in the Portal and you will be asked for a URL.  The URL is the External ITS URL, which should be something like http://hostname:port/scripts/wgate/service/!
    Please read the guides and FAQ.  Thank you.
    Edgar

  • Wagetypes used in Travel Management for Country grouping 40 (India)

    Dear Consultants,
    May I know which model wagetypes are to be used for Travel management for country grouping 40 (India). For Country Grouping 10 (US) we have MJ10 to MJ95. I created some wagetypes & set their characteristics similar to those in MJ10 to M95 but it does not work well.
    Is there any simple process to go from Wagetypes > symbolic accounts > GL Accounts.
    Regards,
    Bindumadhav

    That's my guess, as it worked for me:
    It doesn't compile, because there's a bug in the structure of the PNP logical database.
    Payroll result structure specific to your country is not listed as a 'possible type' for LDB node 'Payroll'.
    You can correct it easily in tracaction SE36. Choose PNP, tab: 'Structure'.
    Double-click on 'PAYROLL'. Click on 'Possible types'.
    Add country-specific structure (PAYIN_RESULT).
    Tell me what happened
    PS. Be aware that this is a modification to the system and you need a key for this object.
    Message was edited by: Jacek Wojciechowski

  • Can i get a sim card for an unlock iphone 4 to use outside the country

    can i get a sim card for an unlock iphone 4 to use outside the country? i bought an iphone 4 unlocked but it didnt come with a sim card and my old phone the sim card wont fit so where can i get a sim to fit and work in the new iphone 4 in another country.

    You would get it from whatever carrier you were going to use.

  • Can I use iMessage for free with someone in a different country?

    Can I use iMessage for free with someone in a different country?

    Suzanne515 wrote:
    dj,
    That is good to know. Have you  ever turned off wi-fi and used your cellular data instead? I'd like to know if your carrier charges you for the iMessage? I will be travelling with a +44 number on my sim card (Teletial based in the Channel Islands I believe) and some places like South Korea & Japan charge about  $30USD/MB. ( or 19 GBP/MB). The devil is in the detail. 
    My carrier, 3, does not charge extra for cellular data.   I pay £34 per month for a cellular plan with unlimited data.  So, no, I do not get charged for sending iMessages whether I am on cellular data or wifi.  If I were to try to send an iMessage to an international number that did not belong to an Apple device, it would send as SMS and I am sure that standard international rates would apply.  Apple iMessage is a different protocol for users with an AppleID.  There is no way for the carrier to distinguish it from any other data traffic.

  • If i buy an iphone 5s sprint can i use it for CDMA? I ask that because i went out of the country one time and used it on a CDMA network but that was my iphon 5 not an i phone 5s.

    if i buy an iphone 5s sprint can i use it for CDMA? I ask that because i went out of the country one time and used it on a CDMA network but that was my iphon 5 not an i phone 5s.

    Sprint is a CDMA carrier, same as Verizon so it will work on CDMA.

  • ERROR in MIRO : An exchange rate type is not defined for country IN

    Experts:
    When I try to enter the invoice received from the vendor, I am getting the following message.
    An exchange rate type is not defined for country IN
    Message no. FF802
    Can anyone provide me a solution for this?
    Thanks,
    Vijai

    This is the explanation given in note 974619 for the above error message
    Summary
    Symptom
    When you post an FI document, the system issues error message FF 801 or FF 802.
    Other terms
    Plants abroad, FF 801, FF802
    Reason and Prerequisites
    You use the 'Plants abroad' function.
    See Note 882132 for more information about this.
    Solution
    If the 'Plants abroad' function is active, additional fields appear when you maintain the country global parameters (transaction OY01, table T005):
    - Country currency       (Field WAERS)
    - Exchange rate type     (Field KURST)
    - Net discount base      (Field XSKFN)
    - Net tax base           (Field XMWSN)
    You must maintain the fields 'Country currency' and 'Exchange rate type'.
    Otherwise, the system issues error message FF 801 or FF 802.
    thanks
    G. Lakshmipathi

  • Determine of Tax Code for Country/Product Category - Table handling

    Dear Experts,
    in SRM 7.0, CS, i am facing the following requirement regarding tax codes:
    We have users from different countries using SRM. These different countries have different tax codes that are to be used for legal reasons.
    My question is, how i can achieve a system behaviour, by which in the shopping cart, the correct tax codes gets selected automatically, based on the country of the user, who is creating the shopping cart.
    Question 1:
    Is it correct to assume, that this requirement can be achieved by maintaining the "Determine of Tax Code for Country/Product Category" - Table?
    Q2:
    What is the purpose of the 1st column of the above mentioned table, "Domestic/International Indicator"? Can it be left blank?
    Q3:
    Is it possible to fill in the values for the field "Country" BUT to leave the field "Category ID" empty???The reason for asking it, that otherwise several hundreds entries would have to be maintaind manaully...
    Q4:
    From where in the shopping cart or ppoma settings is the system fetching the Country code, in order to be able to use it in the table? Is there any specific attribute maintenance that has to be taken care of, so the above mentioned table can be used (e.g. delivery address, including the country information)?
    Thank you very much for your help in understanding the topic.

    Hi
    Here are my responses to your questions:
    Question 1:
    Is it correct to assume, that this requirement can be achieved by maintaining the "Determine of Tax Code for Country/Product Category" - Table?
    Answer -  If you have a requirement where different countries have different tax codes, then you do need this confiugration. Otherwise Configuraiton in Enter Tax Code  are sufficient.
    Q2:
    What is the purpose of the 1st column of the above mentioned table, "Domestic/International Indicator"? Can it be left blank?
    Answer - Sometimes you have different codes for International and Domestic purchases for a product Category. IN those situations you can select Domestic/International field to differentiate btw tax codes. Otherwise this field can be left blank
    Q3:
    Is it possible to fill in the values for the field "Country" BUT to leave the field "Category ID" empty???The reason for asking it, that otherwise several hundreds entries would have to be maintaind manaully...
    Answer - No, if you enter country, then Category Id field is mandatory. You may enter * in case you dont have multiple backend systems. otherwise you will ve to ve individual entries for each category and backend system.
    Q4:
    From where in the shopping cart or ppoma settings is the system fetching the Country code, in order to be able to use it in the table? Is there any specific attribute maintenance that has to be taken care of, so the above mentioned table can be used (e.g. delivery address, including the country information)?
    Answer - It is picked up from the address of the user where is will receive goods. and Domestic/International will be decided based on Vendor address with reference to thta address.
    I hope my responses clarify your doubts.
    Regards
    Virender Singh

  • VAT taxes for country NL

    Hi,
    I have configured the taxes for country NL in FTXP. I have the acct determination and percentages set in te tax code (input tax). We are using TAXNL procedure. For testing we are trying to post a vendor invoice in FB60 for a NL vendor and NL company code. But we are not able to display any tax codes to calculate taxes.
    Any ideas as to why?
    Regards,
    Raj/

    Dear:
                 Have you made sure that there is * sign in Tax category in FS00 control data tab for GL you wan posting, check recon GL account in FS00 for the tax category. Now coming to your query FK01 and XK01, i mean to say that in vendor master data , have the tax code been assigned and made as liable for taxes. Please check your tax code settings for enjoy transactions for FI-AR in customizing. Hope this will help you solve your issue.
    Regards

  • Exchange rate type not defined for country

    Hi All,
    I have noticed an error message during testing of postings using tax codes. The error message nbr is FF802 (Exchange rate type is not defined for country XX). When we are testing postings on accounts for which tax code is ignored (not relevant) it is ok. Could you please let me know where exactly we have settings and how it is related to the tax codes ? I have never seen that connection previously.
    Thanks,
    Points will be rewarded afterwards.
    Tomasz

    Hi Tomasz,
    The exchange rate types are defined at country level in General Settings and the company codes with that country can access that. Normally the exchange rate types are defined as M, P, B and G. M is for average rate and is used in FI,  while P is for planning in CO.
    Regd
    Bharat

  • Why using workarea for internal table is better in performance

    Please tell me
    why using workarea for internal table is better in performance

    Hi Vineet ,
      Why would we choose to use an internal table without a header line when it is easier to code one  with a header line?
    it has following reason.
    1)Separate Internal Table Work Area:
         The work area (staging area) defined for the internal table   is not limited to use with just one internal table.
    take ex-
    Suppose you want two internal tables for EMPLOYEE – one to contain all records and one to contain only those records where country = ‘USA’.  You could create both of these internal tables without header lines and use only one work area to load data into both of them. You would append all records from the work area into the first internal table.  You would conditionally append the ‘USA’ records from the same work area into the second internal table.
    2)  Performance Issues:  Using an internal table without a header line is more efficient than one  with a header line
    3) Nested Internal Tables:  If you want to include an internal table within a structure or another   internal table, you must use one without a header line.
    If this one is helpful ,then rewards me
    Regards
    Shambhu

  • Error: Maintain VAT registration no. for country in previous screen

    Hi,
    I am getting an error "Maintain VAT registration number for country in previous screen"
    The vendor is based in Amsterdam and the VAT Reg No. is for Netherlands. There are other VAT Reg numbers (different countries) as well for the vendor maintained in the 'Others' tab in master data.
    Because of maintaining the VAT reg no. on main screen of master data, I am getting an error in Vendor tax acquisition report, where VAT reg. nos. for other countries are missing and I can see only Netherlands VAT reg number in the report.
    Has anyone of you faced such kind of a issue?
    Thanks,

    Dear,
    Please could you use the following website in order to check if the VAT reg number is correct:
    http://ec.europa.eu/taxation_customs/vies/
    sometimes happens that there is some mistake in the VAT reg no. provided...
    I hope it helps
    Silvia

Maybe you are looking for