Pbm dma sync timeout
Hello,
I am working with a device driver for a high speed PCI ADC board, that works well on all sun computers except a sunblade 2500 server. On any system except a sunblade 2500 server, I can keep acquiring data for days together without any problem. However on a sunblade 2500, the computer hangs within a few minutes after starting the acquisition.
In kadb, the command $<msgbuf displays the following message just prior to the crash:
pcisch1 (pci@1c,600000): pbm dma sync 4000e781a1e, 40000 00000000 timeout
The (pci@1c,600000) refers to my PCI ADC board.
What does this message mean and what can I do to fix this problem?
thanks for helping
aspiration
Hello Vitaly Filatov,
thank you for your response. Here is the info you wanted.
On Ultra 60 (where my driver works fine)
uname -srvmpi produces the following output:
SunOS 5.9 Generic_117171-07 Sun4u sparc sunw, ultra-60
and .version proudces the following output:
Release 3.31 Version 0 created 2001/7/25 20:31
OBP: 3.31.0 2001/7/25 20:31
POST: 2.0.3 2000/7/31 15:28
On Sunblade 2500 where my driver crashes, uname produces
sunos 5.9 Generic_117171-07 sun4u sparc sunw, sun-blade-2500
and .version produces
Release 4.13.5 created 2004/5/27 17:31
OBP: 4.13.5 2004/5/27 17:31 sunblade 2500, sunfire v250
OBDIAG: 4.13.5 2004/5/27 17:33
POST: 4.13.0 2004/1/16 12:39
Please note that due to the very high speed acquisition rate of the ADC board, DMA is used to transfer data from ADC onboard memory to user space.
thanks
Aspiration
Similar Messages
-
Guys, sorry if the answer is overly obvious, but I've spent a couple of days searching the forums, the wiki, google, and in the config files for how to change the sync timeout in pacman, but can't find what I'm looking for. Perhaps I'm using the wrong search terms, or looking in the wrong places, but not sure.
Anyway, when trying to sync the system with the package mirrors using pacman, there is currently a delay of what seems like 4 to 5 minutes for each mirror that is not available. I'm wanting to change that delay to something more like a minute or so if there's no problem in doing that.
Do any of you know where that timeout period can be changed?
Thank you.don't know if changing the timeout is possible, but delays to skip a non-responding mirror of more then 10 seconds are bad.
- how many mirrors do you have enabled and did you check them against http://www.archlinux.org/mirrors/status/
normally having 3 or 4 mirrors (1 primary, rest for backup) enabled is more then enough
- what Xfer command are you using ? -
Statspack: High log file sync timeouts and waits
Hi all,
Please see an extract from our statpack report:
Top 5 Timed Events
~~~~~~~~~~~~~~~~~~ % Total
Event Waits Time (s) Ela Time
log file sync 349,713 215,674 74.13
db file sequential read 16,955,622 31,342 10.77
CPU time 21,787 7.49
direct path read (lob) 92,762 8,910 3.06
db file scattered read 4,335,034 4,439 1.53
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
log file sync 349,713 150,785 215,674 617 1.8
db file sequential read 16,955,622 0 31,342 2 85.9
I hope the above is readable. I'm concerned with the very high number of Waits and Timeouts, particulary around the log file sync event. From reading around I suspect that the disk our redo log sits on isn't fast enough.
1) Is this conclusion correct, are these timeouts excessively high (70% seems high...)?
2) I see high waits on almost every other event (but not timeouts), is this pointing towards an incorrect database database setup (give our very high loads of 160 executes second?
Any help would be much appreciated.
JonathanTop 5 Timed Events
~~~~~~~~~~~~~~~~~~ % Total
Event Waits Time (s) Ela Time
log file sync 349,713 215,674 74.13
db file sequential read 16,955,622 31,342 10.77
CPU time 21,787 7.49
direct path read (lob) 92,762 8,910 3.06
db file scattered read 4,335,034 4,439 1.53
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
log file sync 349,713 150,785 215,674 617 1.8
db file sequential read 16,955,622 0 31,342 2 85.9What's the time frame of this report on?
It looks like your disk storage can't keep up with the volume of I/O requests from your database.
The first few thing need to look at, what're IO intensive SQLs in your database. Are these SQLs doing unnecessary full table scan?
Find out the hot blocks and the objects they belong.
Check v$session_wait view.
Is there any other suspicious activity going on in your Server ? Like other program other than Oracle doing high IO activities? Are there any core dump going on? -
hi,
i want to implement a timer, which throws an Exception if my sync takes longer then xx seconds. Does anyone have an example?
thx a lot
ChrisHi Marcel,
Thanks for your quick response. Well, there is something wrong with the igb3 interface. However, we have tried to use another good interface but the problem persists:
root@sylvia01 # dladm show-aggr
key: 1 (0x0001) policy: L2 address: 0:10:e0:2b:8b:3d (auto)
device address speed duplex link state
nxge1 0:10:e0:2b:8b:3d 1000 Mbps full up attached
igb2 0:10:e0:2d:fe:76 1000 Mbps full up attached
root@sylvia01 # dladm show-aggr -L
key: 1 (0x0001) policy: L2 address: 0:10:e0:2b:8b:3d (auto)
LACP mode: active LACP timer: short
device activity timeout aggregatable sync coll dist defaulted expired
nxge1 active short yes yes yes yes no no
igb2 active short yes no no no yes no
root@sylvia01 # dladm show-aggr -s
key:1 ipackets rbytes opackets obytes %ipkts %opkts
Total 55603353 13546304527 47220 5398841
nxge1 95531 11816162 4424 559496 0.2 9.4
igb2 55507822 13534488365 42796 4839345 99.8 90.6
Any more suggestion? According to the our network team, those ports are configured as PortChannel.
Thanks in advance. -
Many FTP sync timeouts with GoodSync and Visual Studio
Hi All,
I'm trying to sync my azure Wordpress website with my local folder trough GoodSync. Analysing fails all the time. Only way to complete it is to pouze it everi 30 sec, wait, continue, repeat until done.
150105 Error analyzing ftp://waws-prod-am2-015.ftp.azurewebsites.windows.net/site/wwwroot/wp-content/themes: Reading listing: receiving line: [receiving data 23.100.2.124:10001]: Time out
I'm using GoodSync because editing my azure website trough Visual Studio is not stable eather. When visual studio is opening the recent FTP website, it needs minuts (15+) to open. Looks like its hanging all time. Looks like Visual Studio is trying to
get directory listning and gets the same problem on the background.
Firewall disabled. WIFI, cabel internet, all tested. I dont have the problem with non-azure FTP Hosts.
What can I do to make it work?
Kinds regards,
SvenHi,
First, we need to ensure that this is azure side or googsync issue, I try to use this tool to sync the azure ftp site with my local, it runs as except, I am not familiar with googsync, I don't know the limit size of the files to sync, please
try to create a clean azure web site to test, if you encounter the same issue, please try to get help from goodsync support:
http://www.goodsync.com/support
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
NFS write error: on host (10.10.10.10 (the disk array): Not Owner).
A disk array is attached to the Sun OS 5.8 server through NFS and is used for the storage of the iPlanet Message server's message store. There are warnings for this NFS volume: NFS write error: on host (10.10.10.10 (the disk array): Not Owner). What does this mean?
During the restart of the solaris server, this warning messaging repeated endlessly on the screen with a white backgroud.
I had to use Stop-A to stop it, and then, panic and dump occured.
During the startup, a message was "consistent dma sync timeout." What does this mean?
After the server restarted, the NFS warnings are still there.
The server is Solaris 8 on SunFire 480.
What could the problems be? How to solve them?Thanks.
Let me clarify the situation here:
Only the mailboxes are on the NFS volume and shared by the two mail servers. -
msg-instance/store/mboxlist and msg-instance/store/user are located locally. ONLY msg-instance/store/partition/primary is on the NFS volume and shared between the two mail servers.
So, would this still be a problem?
And, yes, the mailsvr user id exists on the IBM NAS which provides disk arrays for this NFS volume. Do I need grant particular rights to this user on NAS? Do I need to do something on the NFS server which, I think it is the Sun server?
Thanks again. -
Sync Invoke timeout, how to set?
I am trying to use the Orabpel to invoke a long running synchronous web services. What is the default timeout second? How do i make it longer?
Thanks.There is a parameter in the BPEL console>Manage BPEL domain that is used to configure the sync timeout from the perspective of the BPEL PM. The specific property you should be looking for is sync-max-wait-time.
If you are invoking this service through the HTTP/SOAP layer, then you might need to configure the HTTP server to increase the timeout. This is not needed if you initiate the BPEL process from the console or the API delivery service API.
Edwin -
Hi all,
My application involves grabbing images from a 3-taps, 16-bit camera using FlexRIO. The PXI controller I am using is Windows-based while the FlexRIO module that I have is a PXI-7954 + NI 1483 adapter. The size of the image I am grabbing is 2560 x 2160, U16 and the clock cycle is 100 MHz. I've been trying for over a week and up to today, I still am not able to get the image from the camera as I kept on getting the DMA Write Timeout error. Right now, the DMA size in the FPGA is set at 130k but whenever I tried to increase this further, I get a compilation error. I've tried to have the host program to grab 100k data points from the FPGA DMA at every milisecond but it seems that, I am capped at about 10-15ms. Perhaps, Windows has its own limitation...
Attached is the program that I am using, modified from the LabVIEW shipped example. Please advice, how do move forward from here? or, is it possible to further increase the DMA buffer size up 10x higher than the current limit?
Attachments:
1-Tap 10-Bit Camera with Frame Trigger.zip 1684 KBHi Shazlan
Apologies for taking so long to reply to you.
You are correct in saying that the latest driver is IMAQ 4.6.4 and this can be downloaded from our website if you have not done so already.
If you have already installed the IMAX 4.6.4 driver, has this managed to resolve your issue?
Also, have you tried to run the compilation again and obtained a report outlining the problems?
As a side note - I have been looking into the possibility of downloading some sort of driver for the Samos camera you are using from Andorra. While National Instruments have not created a driver for this device, Andorra do have a Software Development Kit (SDK) which they say works with LabVIEW. You may find it useful to have this so that you no longer have to write the driver yourself. This may then save resources on the FPGA.
Keep me updated on your progress and I will continue to look into this issue for you.
Regards
Marshall B
Applications Engineer
National Instruments UK & Ireland -
ITunes sees my iPhone 4S but will not sync!
I have a 64G iPhone 4S. When I plug the phone into my Mac Book Pro, iTunes recognizes my phone and begins to sync but NEVER actually syncs. It times out and say that iTunes is unable to sync with phone. I have tried everything that I know and everything that two Apple tech people know. Uninstalled iTunes, reset and restored the iPhone. Apple sent me a new phone and it still doesn't work!! My wife's iPhone 4 syncs fine with the same computer. I have even tried syncing my 4S with a different computer and it does the same thing. I even took my Mac to two other Internet/network sources to see if the routers or network settings was the issue and it still doesn't sync! Someone please give me some tips!
Thanks,
DBI don't know if this will help but it just fixed my iPhone 4 that was getting error messages and refusing to sync.
Sounds weird but it has worked for others with syncing problems too.
Connect your phone to iTunes by USB and let it go through its sync timeout thingy.
After that, select your iPhone icon in the left hand panel in iTunes, scroll down to the bottom of the Summary page (main window) and uncheck 'sync with this iPhone over wi-fi'.
Next, check the box to enable 'Manually manage music and videos'.
Now click Apply and see if it goes through the motions. (Obviously, with nothing manually checked it won't copy any apps, videos or music on to the iPhone, and the sync process might happen quite fast)
If you don't get an error this time, you might have fixed it. If so, to finish the procedure, uncheck the manual sync option and click the Apply button again.
It's up to you whether you leave the iTunes wi-fi connect option off.
There seems to be a glitch with iTunes and iOS 5.1. It was made even worse in the upgrade to iOS 5.1.1 a few days ago. But I am no techy, so that's JMO.
Hope that helps, but is a long shot for you with a new phone. -
V880 CPU timneout / dump errors
We have a V880 with 8x1.2GHz CPU's we just purchased.
And we are having some CPU problems.
On arrival CPU's 7 & 8 failed due to timeouts. We received a new RMA from Sun for a 2x1.2GHx mem/board.
Last night we had the same problem occur:
Complained about cpu3 and dumped���(panic[cpu3]/thread=3001b87d760: panic sync timeout
dumping to /dev/dsk/c1t0d0s1, offset 1718222848I) pulled that cpu module and the system was fine after that
Then overnight we had another problem:
Looks like our system rebooted last night due to a failure on cpu 5.
Dec 13 01:57:23 gandalf unix: [ID 836849 kern.notice]
Dec 13 01:57:23 gandalf ^Mpanic[cpu5]/thread=30015443080:
Dec 13 01:57:23 gandalf unix: [ID 127206 kern.notice] alloccgblk: can't find blk in cyl, pos:10, i:1985, fs:/ bno: b49
Dec 13 01:57:23 gandalf unix: [ID 100000 kern.notice]
Dec 13 01:57:23 gandalf genunix: [ID 723222 kern.notice] 000002a1008f0f50 ufs:real_panic_v+70 (0, 1047c140, 2a1008f11f0, 0
, 0, 0)
Dec 13 01:57:23 gandalf genunix: [ID 179002 kern.notice] %l0-3: 00000000101ffa24 0000000000000000 0000000000002000 00000
2a1008f1a00
Dec 13 01:57:23 gandalf %l4-7: 00000300159e92d8 0000030002c8cd88 0000000000002000 00000000ff23c008
Dec 13 01:57:23 gandalf genunix: [ID 723222 kern.notice] 000002a1008f1000 ufs:ufs_fault_v+c8 (3000017d230, 0, 2a1008f11f0,
300031e9e18, 5b, 0)
Dec 13 01:57:23 gandalf genunix: [ID 179002 kern.notice] %l0-3: 000003000017d180 000000001047c140 00000300159e9480 00000
300159e9420
Please advise if this may be due to a patch or hardware?
thanksThis is the diagnostic output from the test 880. This system only has 1 cpu module in it. This is the one that was sent as an rma replacement.
��
<*>
Hardware Power On
@(#)OBP 4.15.1 2004/06/02 16:06 Sun Fire 8XX
Front Panel Keyswitch is in Diagnostic position.
System is initializing in Service Mode.
Online: CPU0 CPU2*
Validating JTAG integrity...Done
Disabling DAR error circuitry...Done
Clearing DCS error circuitry state...Done
Initializing DTL circuitry state...Done
Initializing MDR via JTAG...Done
Enabling DAR error circuitry...Done
Probing core system FRUs..
Probing Motherboard....part# 501-6771-02 serial# 000406
Safari min 100MHz, cumulative 100MHz; max 150MHz, cumulative 150MHz
'STICK' clock 10MHz; BootBus timing 014f.99fd.a7e6.3f29
Probing I/O Board......part# 501-5142-17 serial# 035061
Probing System RSC.....part# 501-5856-06 serial# 267275
Probing PwrDistBoard...part# 375-0071-03 serial# N59035
Probing PowerSupply0...part# 300-1353-03 serial# M82973
Probing PowerSupply1...part# 300-1353-03 serial# M82974
Probing PowerSupply2...part# 300-1353-03 serial# M82971
Probing GPTwo Slot A...part# 501-6164-02 serial# 007739
Safari min 100MHz, cumulative 100MHz; max 150MHz, cumulative 150MHz
CPU rated speed 1200MHz; ECache 8MB 3.3ns
Probing GPTwo Slot B...No module detected
Probing GPTwo Slot C...No module detected
Probing GPTwo Slot D...No module detected Done
Desired Safari Bus speed 150MHz, selecting 150MHz
Configuring CPUs..........
... CPU0 Rated Speed 1200MHz, Safari 150MHz, want 8:1, got 8:1 ==> CPU 1200MHz
Ecache 8MB 3.3ns mode=5-4-4 2-way ECCR: 0000.0000.0343.4c00
... CPU2 Rated Speed 1200MHz, Safari 150MHz, want 8:1, got 8:1 ==> CPU 1200MHz
Ecache 8MB 3.3ns mode=5-4-4 2-way ECCR: 0000.0000.0343.4c00 Done
Setting system speed (and resetting)...
<*>
Set Speed Reset
@(#)OBP 4.15.1 2004/06/02 16:06 Sun Fire 8XX
Front Panel Keyswitch is in Diagnostic position.
System is initializing in Service Mode.
Online: CPU0 UltraSPARC III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online: CPU2 UltraSPARC III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache <br />Executing POST w/%o0 = 0000.1000.0101.4043<br />0:0><br />0:0>@(#) Sun Fire[TM] V880/V890 POST 4.15.0 2004/05/27 13:23 <br /> /dat/fw/common-source/firmware_re/post/post-build-4.15.0/Cam elot/daktari/<br />integrated (firmware_re) <br />0:0>Copyright �� 2004 Sun Microsystems, Inc. All rights reserved<br /> SUN PROPRIETARY/CONFIDENTIAL.<br /> Use is subject to license terms.<br />0:0>Jump from OBP->POST.<br />0:0>diag-switch? configuration variable set TRUE.<br />0:0>Keyswitch in DIAGNOSTIC POSITION.<br />0:0>Diag level set to MAX.<br />0:0>Verbosity level set to MAX.<br />0:0>MFG scrpt mode set NORM <br />0:0>I/O port set to serial TTYA.<br />0:0><br />0:0>Start selftest...<br />0:0>CPUs present in system: 0:0 2:0<br />0:0>Test CPU(s).....<br />0:0>Init CPU<br />0:0> UltraSparc_III_plus Version 11.1<br />0:0>DMMU Registers Access<br />0:0>DMMU TLB DATA RAM Access<br />0:0>DMMU TLB TAGS Access<br />0:0>IMMU Registers Access<br />0:0>IMMU TLB DATA RAM Access<br />0:0>IMMU TLB TAGS Access<br />0:0>Probe Ecache<br />0:0> Size = 00000000.00800000...<br />0:0>Ecache Data Bitwalk<br />0:0>Ecache Address Bitwalk<br />0:0>Scrub and Setup Ecache<br />0:0>Setup and Enable DMMU<br />0:0>Setup DMMU Miss Handler<br />0:0>Test and Init Temp Mailbox<br />2:0>Init CPU<br />2:0> UltraSparc_III_plus Version 11.1<br />2:0>DMMU Registers Access<br />2:0>DMMU TLB DATA RAM Access<br />2:0>DMMU TLB TAGS Access<br />2:0>IMMU Registers Access<br />2:0>IMMU TLB DATA RAM Access<br />2:0>IMMU TLB TAGS Access<br />2:0>Probe Ecache<br />2:0> Size = 00000000.00800000...<br />2:0>Ecache Data Bitwalk<br />2:0>Ecache Address Bitwalk<br />2:0>Scrub and Setup Ecache<br />2:0>Setup and Enable DMMU<br />2:0>Setup DMMU Miss Handler<br />2:0>Test and Init Temp Mailbox<br />0:0>Init Scan/I2C.....<br />0:0>Initializing Scan Database<br />0:0>Mask DAR errors off<br />0:0>Init MDR DTL<br />0:0>Init DAR DTL<br />0:0>Enable Partial DAR error<br />0:0>Init DCS DTL<br />0:0>Init I2C<br />0:0>Unquiesce Safari<br />0:0>Margin all voltages to nominal<br />0:0>Scan ring integrity<br />0:0><br />0:0>INFO: H/W under test = CPU Board Slot B (Cheetah 1, DCDS [0-7], SRAMs) Scan <br />Ring NOT Present or Shut OFF <br />0:0><br />0:0>INFO: H/W under test = CPU Board Slot B (Cheetah 3, SRAMs) Scan Ring NOT Pre<br />sent or Shut OFF <br />0:0><br />0:0>INFO: H/W under test = CPU Board Slot C (Cheetah 4, DCDS [0-7], SRAMs) Scan <br />Ring NOT Present or Shut OFF <br />0:0><br />0:0>INFO: H/W under test = CPU Board Slot D (Cheetah 5, DCDS [0-7], SRAMs) Scan <br />Ring NOT Present or Shut OFF <br />0:0><br />0:0>INFO: H/W under test = CPU Board Slot C (Cheetah 6, SRAMs) Scan Ring NOT Pre<br />sent or Shut OFF <br />0:0><br />0:0>INFO: H/W under test = CPU Board Slot D (Cheetah 7, SRAMs) Scan Ring NOT Pre<br />sent or Shut OFF <br />0:0>Set Trip Temp CPU 0 to 110C<br />0:0>Set Trip Temp CPU 2 to 110C<br />0:0>TUES DEC 13 11:48:56 GMT 5<br />0:0>Safari quick check<br />0:0> to IO-bridge_0 <br />0:0> to IO-bridge_1 <br />0:0>Safari full check<br />0:0> to IO-bridge_0 <br />0:0> to IO-bridge_1 <br />0:0>Disable CPU 0 error checking<br />0:0>Disable CPU 2 error checking<br />0:0>Basic Memory Test.....<br />0:0>Probe and Setup Memory<br />0:0>INFO: 512MB Bank 0<br />0:0>INFO: 512MB Bank 1<br />0:0>INFO: 512MB Bank 2<br />0:0>INFO: 512MB Bank 3<br />0:0><br />0:0>Data Bitwalk on Master<br />0:0> Test Bank 0.<br />0:0> Test Bank 1.<br />0:0> Test Bank 2.<br />0:0> Test Bank 3.<br />0:0>Address Bitwalk on Master<br />0:0><br />0:0>INFO: Addr walk mem test on CPU 0:0 Bank 0: 00000000.00000000 to 00000000.20<br />000000.<br />0:0><br />0:0>INFO: Addr walk mem test on CPU 0:0 Bank 1: 00000001.00000000 to 00000001.20<br />000000.<br />0:0><br />0:0>INFO: Addr walk mem test on CPU 0:0 Bank 2: 00000002.00000000 to 00000002.20<br />000000.<br />0:0><br />0:0>INFO: Addr walk mem test on CPU 0:0 Bank 3: 00000003.00000000 to 00000003.20<br />000000.<br />0:0>Set Mailbox<br />0:0>Setup Final DMMU Entries<br />0:0>Post Image Region Scrub<br />0:0>Run POST from Memory<br />0:0>Verifying checksum on copied image.<br />0:0>The Memory's CHECKSUM value is 2a78.<br />0:0>The Memory's Content Size value is a0654.<br />0:0>Success... Checksum on Memory Validated.<br />2:0>Safari quick check<br />2:0> to IO-bridge_0 <br />2:0> to IO-bridge_1 <br />2:0>Safari full check<br />2:0> to IO-bridge_0 <br />2:0> to IO-bridge_1 <br />2:0>Probe and Setup Memory<br />2:0>INFO: 512MB Bank 0<br />2:0>INFO: 512MB Bank 1<br />2:0>INFO: 512MB Bank 2<br />2:0>INFO: 512MB Bank 3<br />2:0><br />2:0>Set Mailbox<br />0:0>Data Bitwalk on Slave 2<br />0:0> Test Bank 0.<br />0:0> Test Bank 1.<br />0:0> Test Bank 2.<br />0:0> Test Bank 3.<br />0:0>Address Bitwalk on Slave 2<br />0:0><br />0:0>INFO: Addr walk mem test on CPU 2:0 Bank 0: 00000020.00000000 to 00000020.20<br />000000.<br />0:0><br />0:0>INFO: Addr walk mem test on CPU 2:0 Bank 1: 00000021.00000000 to 00000021.20<br />000000.<br />0:0><br />0:0>INFO: Addr walk mem test on CPU 2:0 Bank 2: 00000022.00000000 to 00000022.20<br />000000.<br />0:0><br />0:0>INFO: Addr walk mem test on CPU 2:0 Bank 3: 00000023.00000000 to 00000023.20<br />000000.<br />2:0>Setup Final DMMU Entries<br />2:0>Map Slave POST to master memory<br />2:0>8k DMMU TLB 0 Data<br />0:0>Full CPU Test.....<br />0:0>8k DMMU TLB 0 Data<br />2:0>8k DMMU TLB 1 Data<br />0:0>8k DMMU TLB 1 Data<br />2:0>8k DMMU TLB 0 Tags<br />0:0>8k DMMU TLB 0 Tags<br />2:0>8k DMMU TLB 1 Tags<br />0:0>8k DMMU TLB 1 Tags<br />2:0>8k IMMU TLB Data<br />0:0>8k IMMU TLB Data<br />2:0>8k IMMU TLB Tags<br />0:0>8k IMMU TLB Tags<br />2:0>Instruction Cache Tag RAM<br />0:0>Instruction Cache Tag RAM<br />2:0>Instruction Cache RAM<br />0:0>Instruction Cache RAM<br />2:0>I-Cache Valid/Predict TAGS Test<br />0:0>I-Cache Valid/Predict TAGS Test<br />2:0>I-Cache Branch Predict Array Test<br />0:0>I-Cache Branch Predict Array Test<br />2:0>Instruction Cache Snoop Tag Field<br />0:0>Instruction Cache Snoop Tag Field<br />2:0>Flush D/W caches<br />0:0>Flush D/W caches<br />2:0>Data Cache RAM<br />0:0>Data Cache RAM<br />2:0>Data Cache Tags<br />0:0>Data Cache Tags<br />2:0>Data Micro Tags<br />0:0>Data Micro Tags<br />2:0>D-Cache SnoopTags Test<br />0:0>D-Cache SnoopTags Test<br />2:0>WCache RAM<br />0:0>WCache RAM<br />2:0>WCache Tags<br />0:0>WCache Tags<br />2:0>W-Cache Valid bit Test<br />0:0>W-Cache Valid bit Test<br />2:0>W-Cache Bank valid bit Test<br />0:0>W-Cache Bank valid bit Test<br />2:0>W-Cache SnoopTAGS Test<br />0:0>W-Cache SnoopTAGS Test<br />2:0>Prefetch Cache RAM<br />0:0>Prefetch Cache RAM<br />2:0>Prefetch Cache Tags<br />0:0>Prefetch Cache Tags<br />2:0>P-Cache SnoopTags Test<br />0:0>P-Cache SnoopTags Test<br />2:0>P-Cache Status Data Test<br />0:0>P-Cache Status Data Test<br />2:0>Branch Prediction Initialization<br />0:0>Branch Prediction Initialization<br />2:0>Print Mem Config<br />2:0>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.<br />2:0>Memory in non-interleave config:<br />2:0> Bank 0 512MB : 00000020.00000000 -> 00000020.20000000.<br />2:0> Bank 1 512MB : 00000021.00000000 -> 00000021.20000000.<br />2:0> Bank 2 512MB : 00000022.00000000 -> 00000022.20000000.<br />2:0> Bank 3 512MB : 00000023.00000000 -> 00000023.20000000.<br />0:0>Memory Block.....<br />0:0>Print Mem Config<br />0:0>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.<br />0:0>Memory in non-interleave config:<br />0:0> Bank 0 512MB : 00000000.00000000 -> 00000000.20000000.<br />0:0> Bank 1 512MB : 00000001.00000000 -> 00000001.20000000.<br />0:0> Bank 2 512MB : 00000002.00000000 -> 00000002.20000000.<br />0:0> Bank 3 512MB : 00000003.00000000 -> 00000003.20000000.<br />2:0>Scrub Memory<br />0:0>Scrub Memory<br />2:0>Quick Block Mem Test<br />2:0>Quick Test 16777216 bytes at 00000020.00000000<br />0:0>Quick Block Mem Test<br />0:0>Quick Test 16777216 bytes at 00000000.00600000<br />0:0>40% Done...<br />2:0>Flush Caches<br />0:0>Flush Caches<br />2:0>Get code in ecache.<br />0:0>Get code in ecache.<br />0:0>IO-Bridge Tests.....<br />0:0>IO-Bridge unit 0 init test <br />0:0>IO-Bridge unit 1 init test <br />0:0>IO-Bridge unit 0 reg test <br />0:0>IO-Bridge unit 0 mem test <br />0:0>IO-Bridge unit 0 PCI DMA A test <br />0:0>IO-Bridge unit 0 PCI DMA B test <br />0:0>IO-Bridge unit 0 PCI merg test <br />0:0>IO-Bridge unit 0 PCI iommu test <br />0:0>IO-Bridge unit 0 PCI stc test <br />0:0>IO-Bridge unit 0 interrupt test <br />0:0>IO-Bridge unit 1 reg test <br />0:0>IO-Bridge unit 1 mem test <br />0:0>IO-Bridge unit 1 PCI DMA C test <br />0:0>IO-Bridge unit 1 PCI DMA D test <br />0:0>IO-Bridge unit 1 PCI merg test <br />0:0>IO-Bridge unit 1 PCI iommu test <br />0:0>IO-Bridge unit 1 PCI stc test <br />0:0>IO-Bridge unit 1 interrupt test <br />2:0>IO-Bridge unit 0 init test <br />2:0>IO-Bridge unit 0 reg test <br />2:0>IO-Bridge unit 0 mem test <br />2:0>IO-Bridge unit 0 PCI DMA test <br />2:0>IO-Bridge unit 0 PCI merg test <br />2:0>IO-Bridge unit 0 PCI iommu test <br />2:0>IO-Bridge unit 0 PCI stc test <br />2:0>IO-Bridge unit 0 interrupt test <br />2:0>IO-Bridge unit 1 init test <br />2:0>IO-Bridge unit 1 reg test <br />2:0>IO-Bridge unit 1 mem test <br />2:0>IO-Bridge unit 1 PCI DMA test <br />2:0>IO-Bridge unit 1 PCI merg test <br />2:0>IO-Bridge unit 1 PCI iommu test <br />2:0>IO-Bridge unit 1 PCI stc test <br />2:0>IO-Bridge unit 1 interrupt test <br />2:0>FPU Registers and Data Path<br />0:0>FPU Registers and Data Path<br />2:0>FPU Move Registers<br />0:0>FPU Move Registers<br />2:0>FSR Read/Write<br />0:0>FSR Read/Write<br />2:0>FPU Branch Instructions<br />0:0>FPU Branch Instructions<br />2:0>FPU Functional Test<br />0:0>FPU Functional Test<br />2:0>FPU BLOCK REG TEST<br />0:0>FPU BLOCK REG TEST<br />2:0>Calculating memory test time<br />0:0>Full Memory Test.....<br />2:0><br />2:0>INFO: The expected TIMEOUT for the block memory tests can exceed 2 minutes.<br />0:0>Calculating memory test time<br />2:0><br />2:0>INFO: The expected TIMEOUT for the MOVI memory tests can exceed 112 minutes.<br />0:0><br />0:0>INFO: The expected TIMEOUT for the block memory tests can exceed 2 minutes.<br />0:0><br />0:0>INFO: The expected TIMEOUT for the MOVI memory tests can exceed 112 minutes.<br />2:0>Block Memory<br />0:0>Block Memory<br />2:0>Test 536870912 bytes on bank 0....<br />0:0>Test 530579456 bytes on bank 0....<br />0:0>1% Done...<br />0:0>4% Done...<br />0:0>6% Done...<br />0:0>9% Done...<br />0:0>12% Done...<br />0:0>15% Done...<br />0:0>18% Done...<br />0:0>20% Done...<br />0:0>23% Done...<br />0:0>26% Done...<br />0:0>29% Done...<br />0:0>32% Done...<br />0:0>35% Done...<br />0:0>37% Done...<br />0:0>40% Done...<br />0:0>43% Done...<br />0:0>46% Done...<br />0:0>49% Done...<br />0:0>51% Done...<br />0:0>54% Done...<br />0:0>57% Done...<br />0:0>60% Done...<br />0:0>63% Done...<br />0:0>65% Done...<br />0:0>68% Done...<br />0:0>71% Done...<br />0:0>74% Done...<br />0:0>77% Done...<br />0:0>79% Done...<br />0:0>82% Done...<br />0:0>85% Done...<br />0:0>88% Done...<br />0:0>91% Done...<br />0:0>94% Done...<br />2:0>Test 536870912 bytes on bank 1....<br />0:0>96% Done...<br />0:0>99% Done...<br />0:0>Test 536870912 bytes on bank 1....<br />0:0>1% Done...<br />0:0>4% Done...<br />0:0>6% Done...<br />0:0>9% Done...<br />0:0>12% Done...<br />0:0>15% Done...<br />0:0>18% Done...<br />0:0>20% Done...<br />0:0>23% Done...<br />0:0>26% Done...<br />0:0>29% Done...<br />0:0>31% Done...<br />0:0>34% Done...<br />0:0>37% Done...<br />0:0>40% Done...<br />0:0>43% Done...<br />0:0>45% Done...<br />0:0>48% Done...<br />0:0>51% Done...<br />0:0>54% Done...<br />0:0>56% Done...<br />0:0>59% Done...<br />0:0>62% Done...<br />0:0>65% Done...<br />0:0>68% Done...<br />0:0>70% Done...<br />0:0>73% Done...<br />0:0>76% Done...<br />0:0>79% Done...<br />0:0>81% Done...<br />0:0>84% Done...<br />2:0>Test 536870912 bytes on bank 2....<br />0:0>87% Done...<br />0:0>90% Done...<br />2:0><br />2:0>WARNING: TEST = Block Memory<br />2:0>H/W under test = CPU0, All CPU0 Memory<br />2:0>MSG = Data or Instruction Access Error,<br /> Trap Type 00000000.00000063<br /> Trap PC ffffffff.f01213d0<br /> Trap Level 00000000.00000001<br /> AFSR 00000002.00000147<br /> AFAR 00000022.06330020<br />2:0>END_WARNING<br /><br />0:0>93% Done...<br />2:0> CE bit: Correctable system data ECC error<br />2:0><br /> Failed cache line data:<br />2:0> Address 00000022.06330000=00000000.00000000.<br />2:0> Address 00000022.06330008=00000000.00000000.<br />2:0> Address 00000022.06330010=00000000.00000000.<br />2:0> Address 00000022.06330018=00000000.00000000.<br />2:0> Address 00000022.06330020=00000000.00000000.<br />2:0> Address 00000022.06330028=00000000.00000000.<br />2:0> Address 00000022.06330030=00000000.00000000.<br />2:0> Address 00000022.06330038=00000000.00000000.<br />2:0> AFSR check after re-reading data:<br />2:0> No Errors in afsr reg<br />0:0>95% Done...<br />2:0><br />2:0>ERROR: TEST = Block Memory<br />2:0>H/W under test = CPU2 Bank 2 Dimm 0, J7900 side 2<br />2:0>Repair Instructions: Replace items in order listed by 'H/W under test' above<br />.<br />2:0>MSG = DIMM failure Bank 2 DIMM 0 Pin 87<br />2:0>END_ERROR<br /><br />0:0>98% Done...<br />2:0>Test 536870912 bytes on bank 3....<br />0:0>Test 536870912 bytes on bank 2....<br />0:0>1% Done...<br />0:0>4% Done...<br />0:0>6% Done...<br />0:0>9% Done...<br />0:0>12% Done...<br />0:0>15% Done...<br />0:0>18% Done...<br />0:0>20% Done...<br />0:0>23% Done...<br />0:0>26% Done...<br />0:0>29% Done...<br />0:0>31% Done...<br />0:0>34% Done...<br />0:0>37% Done...<br />0:0>40% Done...<br />0:0>43% Done...<br />0:0>45% Done...<br />0:0>48% Done...<br />0:0>51% Done...<br />0:0>54% Done...<br />0:0>56% Done...<br />0:0>59% Done...<br />0:0>62% Done...<br />0:0>65% Done...<br />0:0>68% Done...<br />0:0>70% Done...<br />0:0>73% Done...<br />0:0>76% Done...<br />0:0>79% Done...<br />0:0>81% Done...<br />0:0>84% Done...<br />0:0>87% Done...<br />0:0>90% Done...<br />0:0>93% Done...<br />0:0>95% Done...<br />0:0>98% Done...<br />0:0>Test 536870912 bytes on bank 3....<br />0:0>1% Done...<br />0:0>4% Done...<br />0:0>6% Done...<br />0:0>9% Done...<br />0:0>12% Done...<br />0:0>15% Done...<br />0:0>18% Done...<br />0:0>20% Done...<br />0:0>23% Done...<br />0:0>26% Done...<br />0:0>29% Done...<br />0:0>31% Done...<br />0:0>34% Done...<br />0:0>37% Done...<br />0:0>40% Done...<br />0:0>43% Done...<br />0:0>45% Done...<br />0:0>48% Done...<br />0:0>51% Done...<br />0:0>54% Done...<br />0:0>56% Done...<br />0:0>59% Done...<br />0:0>62% Done...<br />0:0>65% Done...<br />0:0>68% Done...<br />0:0>70% Done...<br />0:0>73% Done...<br />0:0>76% Done...<br />0:0>79% Done...<br />0:0>81% Done...<br />0:0>84% Done...<br />0:0>87% Done...<br />0:0>90% Done...<br />0:0>93% Done...<br />0:0>95% Done...<br />0:0>98% Done...<br />0:0><br />0:0>Motherboard/Centerplane Board Part Number: <br />0:0> 5016771-02-50<br />0:0>IO/Riser Board Part Number: <br />0:0> 5015142-17-50<br />0:0>CPUA Board Part Number: <br />0:0> 5016164-02-50<br />0:0>CPUB Board Part Number: <br />0:0><br />0:0>INFO: Unpopulated Slot <br />0:0>CPUC Board Part Number: <br />0:0><br />0:0>INFO: Unpopulated Slot <br />0:0>CPUD Board Part Number: <br />0:0><br />0:0>INFO: Unpopulated Slot <br />0:0>Enable Errors.....<br />0:0>Turn IO-Bridge 0 errors on<br />0:0>Turn IO-Bridge 1 errors on<br />0:0>Turn CPU 0 errors on<br />0:0>Turn CPU 2 errors on<br />0:0>Turn Module A DCDS errors on<br />0:0>Turn DCS errors on<br />0:0>Turn DAR errors on<br />0:0>Turn error traps on<br />0:0>ERROR:<br />0:0> POST toplevel status has the following failures:<br />0:0> CPU2 Memory Bank 2<br />0:0> POST failed the following devices on CPU 2:<br />0:0> Mem Bank2 DIMM0<br />0:0>END_ERROR<br /><br />0:0>POST: Return to OBP.<br /><br /><br />CPU0: System POST Completed<br /> Pass/Fail Status = ffff.ffff.ffff.ffff<br /> ESB Overall Status = ffff.fbff.ffff.ffff<br /><br /><br /><>
POST Reset
@(#)OBP 4.15.1 2004/06/02 16:06 Sun Fire 8XX
Front Panel Keyswitch is in Diagnostic position.
System is initializing in Service Mode.
Online: CPU0 UltraSPARC III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online: CPU2 UltraSPARC III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache <br />Configuring CPUs..........<br />... CPU0 Rated Speed 1200MHz, Safari 150MHz, want 8:1, got 8:1 ==> CPU 1200MHz<br /> Ecache 8MB 3.3ns mode=5-4-4 2-way ECCR: 0000.0000.0343.4c00<br />... CPU2 Rated Speed 1200MHz, Safari 150MHz, want 8:1, got 8:1 ==> CPU 1200MHz<br /> Ecache 8MB 3.3ns mode=5-4-4 2-way ECCR: 0000.0000.0343.4c00 Done<br /><>
CPU Configuration Reset
@(#)OBP 4.15.1 2004/06/02 16:06 Sun Fire 8XX
Front Panel Keyswitch is in Diagnostic position.
System is initializing in Service Mode.
Online: CPU0 UltraSPARC III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online: *CPU2 UltraSPARC III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache <br />Enabling system bus....... CPU0 CPU2 Done<br />Probing Memory............<br />Probing CPU0 memory configuration<br /> NGDIMM#0 part# 501-5401-02 serial# 239775, 128MB + 128MB, SC#0<br /> NGDIMM#1 part# 501-5401-02 serial# 210339, 128MB + 128MB, SC#0<br /> NGDIMM#2 part# 501-5401-02 serial# 269977, 128MB + 128MB, SC#0<br /> NGDIMM#3 part# 501-5401-02 serial# 259281, 128MB + 128MB, SC#0<br /> NGDIMM#4 part# 501-5401-02 serial# 285460, 128MB + 128MB, SC#0<br /> NGDIMM#5 part# 501-5401-02 serial# 241197, 128MB + 128MB, SC#0<br /> NGDIMM#6 part# 501-5401-02 serial# 239762, 128MB + 128MB, SC#0<br /> NGDIMM#7 part# 501-5401-02 serial# 207368, 128MB + 128MB, SC#0<br />Probing CPU2 memory configuration<br /> NGDIMM#0 part# 501-5401-02 serial# 306155, 128MB + 128MB, SC#0<br /> NGDIMM#1 part# 501-5401-02 serial# 241926, 128MB + 128MB, SC#0<br /> NGDIMM#2 part# 501-5401-02 serial# 236717, 128MB + 128MB, SC#0<br /> NGDIMM#3 part# 501-5401-02 serial# 277929, 128MB + 128MB, SC#0<br /> NGDIMM#4 part# 501-5401-02 serial# 267633, 128MB + 128MB, SC#0<br /> NGDIMM#5 part# 501-5401-02 serial# 266643, 128MB + 128MB, SC#0<br /> NGDIMM#6 part# 501-5401-02 serial# 210277, 128MB + 128MB, SC#0<br /> NGDIMM#7 part# 501-5401-02 serial# 284702, 128MB + 128MB, SC#0 Done<br />Initializing CPUs.........<br />Mungeing Memory...........Done<br />HiMem: 0000.00a0.8000.0000, size: 0000.0000.4000.0000<br />Configuring Memory........ CPU0 CPU2 Done<br />Init ICache/etc........... CPU0 CPU2 Done<br />Init ECache Tags.......... CPU0 CPU2 Done<br />Clearing TLBs............. CPU0 CPU2 Done<br />Setup I/DTLBs............. CPU0 CPU2 Done<br />Enabling Cache/MMUs....... CPU0 CPU2 Done<br />Init ECache Data.......... CPU0 CPU2 Done<br />Initializing boot memory..<br />Zeroing memory...Done<br />Copying FLASHRAM to memory...Verifying base 128KB...Done<br />Jumping into RAM (leaving slave CPUs in ROM)<br />RAM CRC = 0000.0000.64d5.d449; ROM CRC = 0000.0000.64d5.d449<br />Dropping in...<br />Find dropin, Decompressing Done, Size 0000.0000.0007.a830 (491KB)<br />Slave CPUs starting Forth at 0000.0000.f000.00e0 Done<br /><br />Boot CPU2 starting Forth at 0000.0000.f000.00e0<br /><br />Diagnostic console initialized<br />Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)<br /> memory-controller <br />Probing gptwo at 1,0 Nothing there<br />Probing gptwo at 2,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)<br /> memory-controller <br />Probing gptwo at 3,0 Nothing there<br />Probing gptwo at 4,0 Nothing there<br />Probing gptwo at 5,0 Nothing there<br />Probing gptwo at 6,0 Nothing there<br />Probing gptwo at 7,0 Nothing there<br />Probing gptwo at 8,0 pci pci <br />Probing gptwo at 9,0 pci pci <br />Probing gptwo at 10,0 Nothing there<br />Probing gptwo at 11,0 Nothing there<br />Probing gptwo at 12,0 Nothing there<br />Probing gptwo at 13,0 Nothing there<br />Probing gptwo at 14,0 Nothing there<br />Probing gptwo at 15,0 Nothing there<br />Probing gptwo at 16,0 Nothing there<br />Probing gptwo at 17,0 Nothing there<br />Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device <br /> SUNW,fru-device <br />Loading onboard drivers: ebus flashprom bbc power i2c fru fru fru fru <br /> fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru i2c <br /> controller smbus-ara controller temperature temperature ioexp adio <br /> adio ioexp ioexp ioexp ioexp ioexp ioexp ioexp adio adio adio adio <br /> temperature-sensor fru fru fru fru fru fru rscrtc hotplug-controller <br /> hotplug-controller hotplug-controller hotplug-controller bbc i2c i2c <br /> nvram idprom rtc gpio pmc rsc-control rsc-console serial <br />Setting NVRAM parameters to default values.<br />Memory Configuration: <br />CPU0 Bank0 128 + 128 + 128 + 128 : 512MB @ a080000000 2-way #0<br />CPU0 Bank1 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #0<br />CPU0 Bank2 128 + 128 + 128 + 128 : 512MB @ a080000000 2-way #1<br />CPU0 Bank3 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #2<br />CPU2 Bank0 128 + 128 + 128 + 128 : Not in Use <br />CPU2 Bank1 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #1<br />CPU2 Bank2 128 + 128 + 128 + 128 : Not in Use [Failed POST diagnostics]<br />CPU2 Bank3 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #3<br />Probing /<a href="mailto:pci@8" target="_blank">pci@8</a>,600000 Device 1 network <br />Probing /<a href="mailto:pci@8" target="_blank">pci@8</a>,600000 Device 2 SUNW,qlc fp disk <br />Probing /<a href="mailto:pci@8" target="_blank">pci@8</a>,700000 Device 1 scsi disk tape <br />Probing /<a href="mailto:pci@8" target="_blank">pci@8</a>,700000 Device 2 Nothing there <br />Probing /<a href="mailto:pci@8" target="_blank">pci@8</a>,700000 Device 3 Nothing there <br />Probing /<a href="mailto:pci@8" target="_blank">pci@8</a>,700000 Device 4 Nothing there <br />Probing /<a href="mailto:pci@8" target="_blank">pci@8</a>,700000 Device 5 Nothing there <br />Probing /<a href="mailto:pci@9" target="_blank">pci@9</a>,600000 Device 1 Nothing there <br />Probing /<a href="mailto:pci@9" target="_blank">pci@9</a>,600000 Device 2 Nothing there <br />Probing /<a href="mailto:pci@9" target="_blank">pci@9</a>,700000 Device 1 network usb <br />Probing /<a href="mailto:pci@9" target="_blank">pci@9</a>,700000 Device 2 Nothing there <br />Probing /<a href="mailto:pci@9" target="_blank">pci@9</a>,700000 Device 3 Nothing there <br />Probing /<a href="mailto:pci@9" target="_blank">pci@9</a>,700000 Device 4 Nothing there <br /><br />screen not found.<br />keyboard not found.<br />Keyboard not present. Using ttya for input and output.<br />Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)<br /> memory-controller <br />Probing gptwo at 1,0 Nothing there<br />Probing gptwo at 2,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)<br /> memory-controller <br />Probing gptwo at 3,0 Nothing there<br />Probing gptwo at 4,0 Nothing there<br />Probing gptwo at 5,0 Nothing there<br />Probing gptwo at 6,0 Nothing there<br />Probing gptwo at 7,0 Nothing there<br />Probing gptwo at 8,0 pci pci <br />Probing gptwo at 9,0 pci pci <br />Probing gptwo at 10,0 Nothing there<br />Probing gptwo at 11,0 Nothing there<br />Probing gptwo at 12,0 Nothing there<br />Probing gptwo at 13,0 Nothing there<br />Probing gptwo at 14,0 Nothing there<br />Probing gptwo at 15,0 Nothing there<br />Probing gptwo at 16,0 Nothing there<br />Probing gptwo at 17,0 Nothing there<br />Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device <br /> SUNW,fru-device <br />Loading onboard drivers: ebus flashprom bbc power i2c fru fru fru fru <br /> fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru i2c <br /> controller smbus-ara controller temperature temperature ioexp adio <br /> adio ioexp ioexp ioexp ioexp ioexp ioexp ioexp adio adio adio adio <br /> temperature-sensor fru fru fru fru fru fru rscrtc hotplug-controller <br /> hotplug-controller hotplug-controller hotplug-controller bbc i2c i2c <br /> nvram idprom rtc gpio pmc rsc-control rsc-console serial <br />Setting NVRAM parameters to default values.<br />Memory Configuration: <br />CPU0 Bank0 128 + 128 + 128 + 128 : 512MB @ a080000000 2-way #0<br />CPU0 Bank1 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #0<br />CPU0 Bank2 128 + 128 + 128 + 128 : 512MB @ a080000000 2-way #1<br />CPU0 Bank3 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #2<br />CPU2 Bank0 128 + 128 + 128 + 128 : Not in Use <br />CPU2 Bank1 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #1<br />CPU2 Bank2 128 + 128 + 128 + 128 : Not in Use [Failed POST diagnostics]<br />CPU2 Bank3 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #3<br />Probing /<a href="mailto:pci@8" target="_blank">pci@8</a>,600000 Device 1 network <br />Probing /<a href="mailto:pci@8" target="_blank">pci@8</a>,600000 Device 2 SUNW,qlc fp disk <br />Probing /<a href="mailto:pci@8" target="_blank">pci@8</a>,700000 Device 1 scsi disk tape <br />Probing /<a href="mailto:pci@8" target="_blank">pci@8</a>,700000 Device 2 Nothing there <br />Probing /<a href="mailto:pci@8" target="_blank">pci@8</a>,700000 Device 3 Nothing there <br />Probing /<a href="mailto:pci@8" target="_blank">pci@8</a>,700000 Device 4 Nothing there <br />Probing /<a href="mailto:pci@8" target="_blank">pci@8</a>,700000 Device 5 Nothing there <br />Probing /<a href="mailto:pci@9" target="_blank">pci@9</a>,600000 Device 1 Nothing there <br />Probing /<a href="mailto:pci@9" target="_blank">pci@9</a>,600000 Device 2 Nothing there <br />Probing /<a href="mailto:pci@9" target="_blank">pci@9</a>,700000 Device 1 network usb <br />Probing /<a href="mailto:pci@9" target="_blank">pci@9</a>,700000 Device 2 Nothing there <br />Probing /<a href="mailto:pci@9" target="_blank">pci@9</a>,700000 Device 3 Nothing there <br />Probing /<a href="mailto:pci@9" target="_blank">pci@9</a>,700000 Device 4 Nothing there <br /><br /><br />Sun Fire 880, No Keyboard<br />Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.<br />OpenBoot 4.15.1, 3072 MB memory installed, Serial #53196234.<br />Ethernet address 0:3:ba:2b:b5:ca, Host ID: 832bb5ca.<br /><br /><br /><br />Creating CPU memory layout properties.<br /><br /><br />Running diagnostic script obdiag/normal<br /><br />Testing /<a href="mailto:pci@8" target="_blank">pci@8</a>,600000/<a href="mailto:network@1" target="_blank">network@1</a><br />Subtest pci-config-reg-test<br />Subtest gem-enet-soft-reset-test<br />Subtest gem-txmc-soft-reset-test<br />Subtest gem-rxmc-soft-reset-test<br />Subtest global-config-reg-test<br />Subtest global-int-mask-reg-walk1-test<br />Subtest gem-txmc-soft-reset-test<br />Subtest tx-configuration-reg-read-test<br />Subtest tx-fifo-wr-ptr-reg-read-test<br />Subtest tx-fifo-rd-ptr-reg-read-test<br />Subtest tx-fifo-pkt-cntr-reg-read-test<br />Subtest tx-data-ptrl-reg-read-test<br />Subtest tx-data-ptrh-reg-rea -
About a month ago I added some new audio books to my iPod Classic and then after disconnecting, I discovered EVERYTHING had been erased.
I had to restore through my iTunes but then I could not load my music back on.
I uninstalled / reinstalled iTunes and completely reformated the iPod drive.
I successfully got my music and books back on but then added a new book two days ago only to discover everything got erased AGAIN!!!
Of course, my 1 Year Warranty was up about a week before the first incident.....
I formatted the iPod again, uninstalled / reinstalled iTunes (it was freezing during sync) and downloaded all my music and books again.
Now I have several books that will not play (they play on iTunes and they played on the iPod before all these events) and the iPod does not keep track of where I was in a book when I have to stop and go to something else.
Does anyone know what is going on with this thing??? I have a 5th Gen Video and in all the years I've had it, I've NEVER had problems like this!
Does anyone have any ideas on what I can do to get my iPod Classic up and running properly again?
Thanks.When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised filesytem structure at the start of the Sync.
The timeout failure could be due to
Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
Have a nice day! -
Dequeue same message twice in topic mode.
I have written a concurrent consumer program to consume AQ's message. The queue is a multiple consumer queue, and i just created one subscriber on it. Then i started 10 threads to dequeue messages from that queue. when all messages are consumed I found that some messages are consumed twice. Is there any tips for this problem?
Thanks very much.
The dequeue log is as follows:
First:
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsListenerWorker.run: Before dispatchOneMsg to dispatch a message to the listener
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsListenerWorker.dispatchOneMsg: entry
Thread-10 [Thu Oct 13 22:01:20 CST 2011] [Thread-10] getLock (OJMS.MessageConsumer.-4ab69733:132fd95ca2e:-8000.37) : after sync, timeout=0
Thread-10 [Thu Oct 13 22:01:20 CST 2011] [Thread-10] getLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.28) : after sync, timeout=0
AQ deliveryMode: 1
Thread-10 [Thu Oct 13 22:01:20 CST 2011] [Thread-10] getLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.28) : acquired session lock, usecount=1
Thread-10 [Thu Oct 13 22:01:20 CST 2011] [Thread-10] getLock (OJMS.MessageConsumer.-4ab69733:132fd95ca2e:-8000.37) : acquired consumer lock, usecount=1
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsListenerWorker.dispatchOneMsg: lockReceive returns, got the lock
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.receiveForListener: entry
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: entry
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: visibility : 2
AQ deliveryMode: 1
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: sec_timeout: 0 close_check_interval: 120
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: After getDbConnection
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: q_name: DEV1_TRANSACTION.UNIT_TEST_Q p_data_type: DEV1_TRANSACTION.GC_NOTIFY_T
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: Payload type-1
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: use_ociaq_lib = false
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsSession.getDequeueStmt: dequeue statement: begin dbms_aqin.aq$_dequeue_in(queue_name => ?, subscriber => ?, msgid => ?, correlation => ?, dequeue_mode => ?, navigation => ?, visibility => ?, wait => ?, enqueue_time => ?, state => ?, out_msgid => ?, out_correlation => ?, priority => ?, delay => ?, expiration => ?, attempts => ?, exception_queue => ?, remote_recipients => ?, sender_name => ?, sender_addr => ?, sender_protocol => ?, original_msgid => ?, payload_type => ?, raw_user_data => ?, object_user_data => ?, deq_cond => ?, signature => ?, out_sign => ?, transformation => ?, delivery_mode => ?, out_delivery_mode => ?); end;
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: consumer_name: SUBSCRIBER1
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: dq_mode: 3navig: 1visibility: 2
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: adt_message retrieved
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: set AQ enqueue_time as 1318514224000
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: msg_id: AEDE32CF4AAEB32EE040010A1AD76B10 corrid: null priority: 1
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: msg_delay(secs): 0
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: exptime(secs): -1
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: attempts: 0
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: excp_q: null
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: recv_time: Thu Oct 13 22:01:20 CST 2011
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.dequeue: exit-2
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsConsumer.receiveForListener: exit
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsListenerWorker.dispatchOneMsg: Received the message: AEDE32CF4AAEB32EE040010A1AD76B10
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsSimpleScheduler.feedData: Got a non null message, the sleep time is reset to 0
Thread-10 [Thu Oct 13 22:01:20 CST 2011] AQjmsListenerWorker.dispatchOneMsg: Before calling onMessage method
2011-10-13 22:01:21 INFO (MockAqListener.java:49)[Thread-10] - Thread-10:3Message ID:AEDE32CF4AAEB32EE040010A1AD76B10 Message :AEDE32CF4AADB32EE040010A1AD76B10
Thread-10 [Thu Oct 13 22:01:21 CST 2011] [Thread-10] getLock (OJMS.Session..-4ab69733:132fd95ca2e:-8000.28) : after sync, timeout=0
Thread-10 [Thu Oct 13 22:01:21 CST 2011] [Thread-10] getLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.28) : Thread Thread-10 try to require lock mulitple times, grant it again.
Thread-10 [Thu Oct 13 22:01:21 CST 2011] [Thread-10] getLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.28) : acquired session lock, usecount=2
2011-10-13 22:01:21 INFO (MockAqListener.java:49)[Thread-19] - Thread-19:2Message ID:AEDE32CF4A86B32EE040010A1AD76B10 Message :AEDE32CF4A85B32EE040010A1AD76B10
Thread-10 [Thu Oct 13 22:01:22 CST 2011] AQjmsSession.restartConsumers: entry
Thread-10 [Thu Oct 13 22:01:22 CST 2011] [Thread-10] releaseLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.28) : after sync
Thread-10 [Thu Oct 13 22:01:22 CST 2011] [Thread-10] unLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.28) : released session lock, EXIT, usecount=1
2011-10-13 22:01:22 INFO (MockAqListener.java:55)[Thread-10] - Thread-10:3Message ID:AEDE32CF4AAEB32EE040010A1AD76B10 Message :AEDE32CF4AADB32EE040010A1AD76B10Commit
Thread-10 [Thu Oct 13 22:01:22 CST 2011] AQjmsListenerWorker.dispatchOneMsg: After calling onMessage method
Thread-10 [Thu Oct 13 22:01:22 CST 2011] [Thread-10] unLock (OJMS.MessageConsumer.-4ab69733:12e:-8000.67) : released session lock, EXIT, usecount=1
Thread-10 [Thu Oct 13 22:01:22 CST 2011] [Thread-10] releaseLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.28) : after sync
Thread-10 [Thu Oct 13 22:01:22 CST 2011] [Thread-10] unLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.28) : released session lock, EXIT, usecount=0
Thread-10 [Thu Oct 13 22:01:22 CST 2011] AQjmsListenerWorker.dispatchOneMsg: unlock the session and EXIT
Second:
Thread-11 [Thu Oct 13 22:01:28 CST 2011] AQjmsListenerWorker.dispatchOneMsg: lockReceive returns, got the lock
Thread-11 [Thu Oct 13 22:01:28 CST 2011] AQjmsConsumer.receiveForListener: entry
Thread-11 [Thu Oct 13 22:01:28 CST 2011] AQjmsConsumer.dequeue: entry
Thread-11 [Thu Oct 13 22:01:28 CST 2011] AQjmsConsumer.dequeue: visibility : 2
AQ deliveryMode: 1
Thread-11 [Thu Oct 13 22:01:28 CST 2011] AQjmsConsumer.dequeue: sec_timeout: 0 close_check_interval: 120
Thread-11 [Thu Oct 13 22:01:28 CST 2011] AQjmsConsumer.dequeue: After getDbConnection
Thread-11 [Thu Oct 13 22:01:28 CST 2011] AQjmsConsumer.dequeue: q_name: DEV1_TRANSACTION.UNIT_TEST_Q p_data_type: DEV1_TRANSACTION.GC_NOTIFY_T
Thread-11 [Thu Oct 13 22:01:28 CST 2011] AQjmsConsumer.dequeue: Payload type-1
Thread-11 [Thu Oct 13 22:01:28 CST 2011] AQjmsConsumer.dequeue: use_ociaq_lib = false
Thread-11 [Thu Oct 13 22:01:28 CST 2011] AQjmsSession.getDequeueStmt: dequeue statement: begin dbms_aqin.aq$_dequeue_in(queue_name => ?, subscriber => ?, msgid => ?, correlation => ?, dequeue_mode => ?, navigation => ?, visibility => ?, wait => ?, enqueue_time => ?, state => ?, out_msgid => ?, out_correlation => ?, priority => ?, delay => ?, expiration => ?, attempts => ?, exception_queue => ?, remote_recipients => ?, sender_name => ?, sender_addr => ?, sender_protocol => ?, original_msgid => ?, payload_type => ?, raw_user_data => ?, object_user_data => ?, deq_cond => ?, signature => ?, out_sign => ?, transformation => ?, delivery_mode => ?, out_delivery_mode => ?); end;
Thread-11 [Thu Oct 13 22:01:28 CST 2011] AQjmsConsumer.dequeue: consumer_name: SUBSCRIBER1
Thread-11 [Thu Oct 13 22:01:28 CST 2011] AQjmsConsumer.dequeue: dq_mode: 3navig: 1visibility: 2
Thread-11 [Thu Oct 13 22:01:29 CST 2011] AQjmsConsumer.dequeue: adt_message retrieved
Thread-11 [Thu Oct 13 22:01:29 CST 2011] AQjmsConsumer.dequeue: set AQ enqueue_time as 1318514224000
Thread-11 [Thu Oct 13 22:01:29 CST 2011] AQjmsConsumer.dequeue: msg_id: AEDE32CF4AAEB32EE040010A1AD76B10 corrid: null priority: 1
Thread-11 [Thu Oct 13 22:01:29 CST 2011] AQjmsConsumer.dequeue: msg_delay(secs): 0
Thread-11 [Thu Oct 13 22:01:29 CST 2011] AQjmsConsumer.dequeue: exptime(secs): -1
Thread-11 [Thu Oct 13 22:01:29 CST 2011] AQjmsConsumer.dequeue: attempts: 0
Thread-11 [Thu Oct 13 22:01:29 CST 2011] AQjmsConsumer.dequeue: excp_q: null
Thread-11 [Thu Oct 13 22:01:29 CST 2011] AQjmsConsumer.dequeue: recv_time: Thu Oct 13 22:01:29 CST 2011
Thread-11 [Thu Oct 13 22:01:29 CST 2011] AQjmsConsumer.dequeue: exit-2
Thread-11 [Thu Oct 13 22:01:29 CST 2011] AQjmsConsumer.receiveForListener: exit
Thread-11 [Thu Oct 13 22:01:29 CST 2011] AQjmsListenerWorker.dispatchOneMsg: Received the message: AEDE32CF4AAEB32EE040010A1AD76B10
Thread-11 [Thu Oct 13 22:01:29 CST 2011] AQjmsSimpleScheduler.feedData: Got a non null message, the sleep time is reset to 0
Thread-11 [Thu Oct 13 22:01:29 CST 2011] AQjmsListenerWorker.dispatchOneMsg: Before calling onMessage method
2011-10-13 22:01:30 INFO (MockAqListener.java:49)[Thread-11] - Thread-11:5Message ID:AEDE32CF4AAEB32EE040010A1AD76B10 Message :AEDE32CF4AADB32EE040010A1AD76B10
Thread-11 [Thu Oct 13 22:01:30 CST 2011] [Thread-11] getLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.26) : after sync, timeout=0
Thread-11 [Thu Oct 13 22:01:30 CST 2011] [Thread-11] getLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.26) : Thread Thread-11 try to require lock mulitple times, grant it again.
Thread-11 [Thu Oct 13 22:01:30 CST 2011] [Thread-11] getLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.26) : acquired session lock, usecount=2
Thread-11 [Thu Oct 13 22:01:30 CST 2011] AQjmsSession.restartConsumers: entry
Thread-11 [Thu Oct 13 22:01:30 CST 2011] [Thread-11] releaseLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.26) : after sync
Thread-11 [Thu Oct 13 22:01:30 CST 2011] [Thread-11] unLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.26) : released session lock, EXIT, usecount=1
2011-10-13 22:01:30 INFO (MockAqListener.java:55)[Thread-11] - Thread-11:5Message ID:AEDE32CF4AAEB32EE040010A1AD76B10 Message :AEDE32CF4AADB32EE040010A1AD76B10Commit
Thread-11 [Thu Oct 13 22:01:30 CST 2011] AQjmsListenerWorker.dispatchOneMsg: After calling onMessage method
Thread-11 [Thu Oct 13 22:01:30 CST 2011] [Thread-11] unLock (OJMS.MessageConsumer.-4ab69733:132fd95ca2e:-8000.43) : released consumer lock, usecount=0
Thread-11 [Thu Oct 13 22:01:30 CST 2011] [Thread-11] releaseLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.26) : after sync
Thread-11 [Thu Oct 13 22:01:30 CST 2011] [Thread-11] unLock (OJMS.Session.-4ab69733:132fd95ca2e:-8000.26) : released session lock, EXIT, usecount=0
Thread-11 [Thu Oct 13 22:01:30 CST 2011] AQjmsListenerWorker.dispatchOneMsg: unlock the session and EXIT
Thread-11 [Thu Oct 13 22:01:30 CST 2011] AQjmsListenerWorker.run: After dispatchOneMsg, Before get the next sleep time
Thread-11 [Thu Oct 13 22:01:30 CST 2011] AQjmsListenerWorker.run: sleep 0 millisecond.This issue looks like Bug: 13729601
(from http://www.oracle.com/technetwork/middleware/docs/aiasoarelnotesps5-1455925.html)
The dequeuer returns the same message in multiple threads in high concurrency environments when Oracle database 11.2 is used. This means that some messages are dequeued more than once. For example, in Oracle SOA Suite, if Service 1 suddenly raises a large number of business events that are subscribed to by Service 2, duplicate instances of Service 2 triggered by the same event may be seen in an intermittent fashion. The same behavior is not observed with a 10.2.0.5 database or in an 11.2 database with event10852 level 16384 set to disable the 11.2 dequeue optimizations.
Workaround: Perform the following steps:
Log in to the 11.2 database:
CONNECT /AS SYSDBA
Specify the following SQL command in SQL*Plus to disable the 11.2 dequeue optimizations:
SQL> alter system set event='10852 trace name context forever,
level 16384'scope=spfile;
Restart the database.
Edited by: Maarten Smeets on Jan 28, 2013 2:10 PM -
RAP Running flex+bridge back haul A radio will not turn on
Hardware: WLC 5508 running latest Software Version 8.0.100.0
AP Code : c1550-k9w8-xx.153-3.JA
Description :Whilst running in flex+bridge mode and configured as a Root AP, the RAP back-haul A radio will not change to operationally UP.
If the AP is changed to be configured as a MAP, the A radio back haul will go operationally UP.
Debug of the AP below and screenshot of the WLC has been attached.
flashfs[0]: 38 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31868928
flashfs[0]: Bytes used: 10195456
flashfs[0]: Bytes available: 21673472
flashfs[0]: flashfs fsck took 17 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC address: b0:00:b4:61:a2:20
Loading "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-mx.153-3.JA"...############
File "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-mx.153-3.JA" uncompressed and installed, entry point: 0x3000
executing...
IOS Secondary Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 38 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31868928
flashfs[0]: Bytes used: 10195456
flashfs[0]: Bytes available: 21673472
flashfs[0]: flashfs fsck took 5 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC address: b0:00:b4:61:a2:20
Boot CMD: 'boot flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA;flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA'
Loading "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA"...################################
File "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1550 Software (C1520-K9W8-M), Version 15.3(3)JA, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 15-Aug-14 13:50 by prod_rel_team
Initializing flashfs...
flashfs[2]: 38 files, 3 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 31610880
flashfs[2]: Bytes used: 10195456
flashfs[2]: Bytes available: 21415424
flashfs[2]: flashfs fsck took 6 seconds.
flashfs[2]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 5806080
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 5805056
flashfs[4]: flashfs fsck took 1 seconds.
flashfs[4]: Initialization complete....done Initializing flashfs.
Radio0 present 8364B 8000 A8020000 0 A8030000 30
Rate table has 336 entries (20 legacy/64 11n/252 11ac)
POWER TABLE FILENAME = flash:/c1550-k9w8-mx.153-3.JA/J2.bin
Radio1 present 8364B 8000 B8020000 0 B8030000 13
POWER TABLE FILENAME = flash:/c1550-k9w8-mx.153-3.JA/J5.bin
Radio2 not present 0 0 0 0 0 11
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP1552EU-N-K9 (PowerPC 8349) processor (revision A0) with 98294K/32768K bytes of memory.
Processor board ID FTX1824P030
PowerPC 8349 CPU at 533Mhz, revision number 0x0031
Last reset from unknown reload cause - ptr to non-ascii bytes 0x17
LWAPP image version 8.0.100.0
4 Gigabit Ethernet interfaces
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: B0:00:B4:61:A2:20
Part Number : 73-13538-02
PCA Assembly Number : 800-31224-01
PCA Revision Number : 03
PCB Serial Number : FOC18159782
Top Assembly Part Number : 800-38848-03
Top Assembly Serial Number : FTX1824P030
Top Revision Number : A0
Product/Model Number : AIR-CAP1552EU-N-K9
% Please define a domain-name first.
Spanning Tree protocol for Bridge Group 1 has not been configured.
Press RETURN to get started!
*Mar 1 00:00:08.551: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
*Mar 1 00:00:09.311: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (1-6)
*Mar 1 00:00:09.311: Registering HW DTLS
*Mar 1 00:00:09.751: m8349_ether_enable: MACCFG1 sync timeout
*Mar 1 00:00:11.547: %LINK-6-UPDOWN: Interface Ethernet4, changed state to up
*Mar 1 00:00:12.415: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:12.423: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:12.423: %LINK-6-UPDOWN: Interface GigabitEthernet1, changed state to up
*Mar 1 00:00:12.423: %LINK-6-UPDOWN: Interface GigabitEthernet2, changed state to up
*Mar 1 00:00:12.423: %LINK-6-UPDOWN: Interface GigabitEthernet3, changed state to up
*Mar 1 00:00:15.279: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:15.471: AP Mesh platform identified (backhaul config:0x2, access:0xF)
*Mar 1 00:00:15.535: Starting Ethernet promiscuous mode
*Mar 1 00:00:18.103: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1550 Software (C1520-K9W8-M), Version 15.3(3)JA, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 15-Aug-14 13:50 by prod_rel_team
*Mar 1 00:00:18.103: %SNMP-5-COLDSTART: SNMP agent on host APb000.b461.a220 is undergoing a cold start
*Mar 1 00:00:19.443: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:20.019: %CDP_PD-4-POWER_OK: Full power - INJECTOR_DETECTED inline power source
*Mar 1 00:00:20.323: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet4, changed state to up
*Mar 1 00:00:21.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:22.151: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:22.191: Starting Ethernet promiscuous mode
*Mar 1 00:00:22.355: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:22.355: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to uplwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:36.591: Currently running a Release Image
*Mar 1 00:00:36.603: Using SHA-1 signed certificate for image signing validation.
*Mar 1 00:00:41.019: %MESH-6-ADJACENCY_STATE_MACHINE_STARTED: Mesh adjacency state machine started
*Mar 1 00:00:41.023: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:00:41.031: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 514 CLI Request Triggered
*Mar 1 00:00:41.035: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:42.115: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
Not in Bound state.
*Mar 1 00:00:42.123: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:43.031: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar 1 00:00:43.115: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:43.223: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:44.223: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:00:46.067: %LWAPP-3-LWAPP_INTERFACE_GOT_IP_ADDRESS: Interface BVI1 obtained IP from DHCP...
*Mar 1 00:00:46.067: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar 1 00:00:46.103: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.199.119.144, mask 255.255.255.192, hostname APb000.b461.a220
*Mar 1 00:00:46.103: %LWAPP-3-LWAPP_INTERFACE_GOT_IP_ADDRESS: Interface BVI1 obtained IP from DHCP...
*Mar 1 00:00:46.103: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar 1 00:00:51.143: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Mar 1 00:00:51.211: %LWAPP-4-CLIENTEVENTLOG: Not sending change state post as the radio admin is down, lrad state = 5
Translating "CISCO-CAPWAP-CONTROLLER.bla"...domain server (10.207.15.11)
*Mar 1 00:00:51.211: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar 1 00:00:52.207: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.198.0.229 obtained through DHCP
*Mar 1 00:00:52.207: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.198.0.230 obtained through DHCP
*Mar 1 00:00:52.211: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:52.215: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Mar 1 00:00:52.223: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:53.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:53.243: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:54.243: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Sep 16 02:13:35.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.207.15.23 peer_port: 5246
*Sep 16 02:13:37.055: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.207.15.23 peer_port: 5246
*Sep 16 02:13:37.055: %CAPWAP-5-SENDJOIN: sending Join Request to 10.207.15.23
*Sep 16 02:13:37.839: %LWAPP-4-CLIENTEVENTLOG:
Checksum required saved version = 8.0.100.0, file flash:/lwapp_reap.cfg
*Sep 16 02:13:38.951: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Sep 16 02:13:39.875: %LWAPP-4-CLIENTEVENTLOG: Not sending change state post as the radio admin is down, lrad state = 2
*Sep 16 02:13:40.151: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Sep 16 02:13:40.243: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller XVD-WLC-5508-02
*Sep 16 02:13:40.287: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
*Sep 16 02:13:40.287: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
*Sep 16 02:13:40.287: %LWAPP-4-CLIENTEVENTLOG: No LS Flex ACL map configuration file to load. Connect to controller to get configuration file
*Sep 16 02:13:40.287: %LWAPP-4-CLIENTEVENTLOG: No Central Dhcp map configuration file to load. Connect to controller to get configuration filecapwap_delete_all_l2Acls_in_nacl_list:336. Deleting all L2Acls in AP config
*Sep 16 02:13:41.895: %WIDS-6-ENABLED: IDS Signature is loaded and enabled
Writing out the event log to flash:/event.log ...
*Sep 16 02:20:51.675: %SYS-5-RELOAD: Reload requested by CAPWAP CLIENT. Reload Reason: Recvd RESET req from Controller.
*Sep 16 02:20:51.687: %LWAPP-5-CHANGED: CAPWAP changed state to DOWN
Write of event.log done
IOS Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 36 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31868928
flashfs[0]: Bytes used: 10009088
flashfs[0]: Bytes available: 21859840
flashfs[0]: flashfs fsck took 17 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC address: b0:00:b4:61:a2:20
Loading "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-mx.153-3.JA"...############
File "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-mx.153-3.JA" uncompressed and installed, entry point: 0x3000
executing...
IOS Secondary Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 36 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31868928
flashfs[0]: Bytes used: 10009088
flashfs[0]: Bytes available: 21859840
flashfs[0]: flashfs fsck took 5 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC address: b0:00:b4:61:a2:20
Boot CMD: 'boot flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA;flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA'
Loading "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA"...################################
File "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1550 Software (C1520-K9W8-M), Version 15.3(3)JA, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 15-Aug-14 13:50 by prod_rel_team
Initializing flashfs...
flashfs[2]: 36 files, 3 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 31610880
flashfs[2]: Bytes used: 10009088
flashfs[2]: Bytes available: 21601792
flashfs[2]: flashfs fsck took 6 seconds.
flashfs[2]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 5806080
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 5805056
flashfs[4]: flashfs fsck took 1 seconds.
flashfs[4]: Initialization complete....done Initializing flashfs.
Radio0 present 8364B 8000 A8020000 0 A8030000 30
Rate table has 336 entries (20 legacy/64 11n/252 11ac)
POWER TABLE FILENAME = flash:/c1550-k9w8-mx.153-3.JA/J2.bin
Radio1 present 8364B 8000 B8020000 0 B8030000 13
POWER TABLE FILENAME = flash:/c1550-k9w8-mx.153-3.JA/J5.bin
Radio2 not present 0 0 0 0 0 11
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP1552EU-N-K9 (PowerPC 8349) processor (revision A0) with 98294K/32768K bytes of memory.
Processor board ID FTX1824P030
PowerPC 8349 CPU at 533Mhz, revision number 0x0031
Last reset from unknown reload cause - ptr to non-ascii bytes 0x18
LWAPP image version 8.0.100.0
4 Gigabit Ethernet interfaces
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: B0:00:B4:61:A2:20
Part Number : 73-13538-02
PCA Assembly Number : 800-31224-01
PCA Revision Number : 03
PCB Serial Number : FOC18159782
Top Assembly Part Number : 800-38848-03
Top Assembly Serial Number : FTX1824P030
Top Revision Number : A0
Product/Model Number : AIR-CAP1552EU-N-K9
% Please define a domain-name first.
Spanning Tree protocol for Bridge Group 1 has not been configured.
Press RETURN to get started!
*Mar 1 00:00:08.551: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
*Mar 1 00:00:09.311: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (1-6)
*Mar 1 00:00:09.311: Registering HW DTLS
*Mar 1 00:00:09.747: m8349_ether_enable: MACCFG1 sync timeout
*Mar 1 00:00:11.547: %LINK-6-UPDOWN: Interface Ethernet4, changed state to up
*Mar 1 00:00:12.411: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:12.423: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:12.423: %LINK-6-UPDOWN: Interface GigabitEthernet1, changed state to up
*Mar 1 00:00:12.423: %LINK-6-UPDOWN: Interface GigabitEthernet2, changed state to up
*Mar 1 00:00:12.423: %LINK-6-UPDOWN: Interface GigabitEthernet3, changed state to up
*Mar 1 00:00:15.279: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:15.455: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg
*Mar 1 00:00:15.467: AP Mesh platform identified (backhaul config:0x2, access:0xF)
*Mar 1 00:00:15.535: Starting Ethernet promiscuous mode
*Mar 1 00:00:18.087: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1550 Software (C1520-K9W8-M), Version 15.3(3)JA, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 15-Aug-14 13:50 by prod_rel_team
*Mar 1 00:00:18.087: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start
*Mar 1 00:00:18.463: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg
*Mar 1 00:00:18.531: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:18.735: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:18.739: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to uplwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:19.431: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:20.011: %CDP_PD-4-POWER_OK: Full power - INJECTOR_DETECTED inline power source
*Mar 1 00:00:20.323: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet4, changed state to up
*Mar 1 00:00:21.495: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:30.559: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.199.119.147, mask 255.255.255.192, hostname APb000.b461.a220
*Mar 1 00:00:36.591: Currently running a Release Image
*Mar 1 00:00:36.603: Using SHA-1 signed certificate for image signing validation.%Default route without gateway, if not a point-to-point interface, may impact performance
*Mar 1 00:00:40.939: AP image integrity check PASSED
*Mar 1 00:00:40.947: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg
*Mar 1 00:00:41.027: %MESH-6-ADJACENCY_STATE_MACHINE_STARTED: Mesh adjacency state machine started
*Mar 1 00:00:41.035: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:42.127: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:42.135: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:43.127: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:43.235: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:44.235: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
%Error opening flash:/capwap-saved-config (No such file or directory)
*Mar 1 00:00:51.047: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 514 CLI Request Triggered
*Mar 1 00:00:51.055: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar 1 00:00:51.059: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar 1 00:00:51.059: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar 1 00:00:56.099: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Mar 1 00:00:56.115: %LWAPP-4-CLIENTEVENTLOG: Not sending change state post as the radio admin is down, lrad state = 5
*Mar 1 00:00:56.115: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar 1 00:00:57.115: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
Translating "CISCO-CAPWAP-CONTROLLER."...domain server (10.207.15.11)
*Mar 1 00:00:59.831: Starting Ethernet promiscuous mode
*Mar 1 00:00:59.839: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.198.0.229 obtained through DHCP
*Mar 1 00:00:59.839: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.198.0.230 obtained through DHCP
*Mar 1 00:03:15.031: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join timer expired
*Mar 1 00:03:15.031: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join failed expired
*Mar 1 00:03:15.031: %MESH-6-LINK_UPDOWN: Mesh station b000.b461.a23c link Down
*Mar 1 00:03:34.151: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar 1 00:03:39.191: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Mar 1 00:06:04.151: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join timer expired
*Mar 1 00:06:04.151: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join failed expired
*Mar 1 00:06:04.151: %MESH-6-LINK_UPDOWN: Mesh station b000.b461.a23c link Down
*Mar 1 00:06:23.271: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar 1 00:06:28.311: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
IOS Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 35 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31868928
flashfs[0]: Bytes used: 10014208
flashfs[0]: Bytes available: 21854720
flashfs[0]: flashfs fsck took 17 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC address: b0:00:b4:61:a2:20
Loading "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-mx.153-3.JA"...############
File "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-mx.153-3.JA" uncompressed and installed, entry point: 0x3000
executing...
IOS Secondary Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 35 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31868928
flashfs[0]: Bytes used: 10014208
flashfs[0]: Bytes available: 21854720
flashfs[0]: flashfs fsck took 5 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC address: b0:00:b4:61:a2:20
Boot CMD: 'boot flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA;flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA'
Loading "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA"...################################
File "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1550 Software (C1520-K9W8-M), Version 15.3(3)JA, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 15-Aug-14 13:50 by prod_rel_team
Initializing flashfs...
flashfs[2]: 35 files, 3 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 31610880
flashfs[2]: Bytes used: 10014208
flashfs[2]: Bytes available: 21596672
flashfs[2]: flashfs fsck took 6 seconds.
flashfs[2]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 5806080
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 5805056
flashfs[4]: flashfs fsck took 1 seconds.
flashfs[4]: Initialization complete....done Initializing flashfs.
Radio0 present 8364B 8000 A8020000 0 A8030000 30
Rate table has 336 entries (20 legacy/64 11n/252 11ac)
POWER TABLE FILENAME = flash:/c1550-k9w8-mx.153-3.JA/J2.bin
Radio1 present 8364B 8000 B8020000 0 B8030000 13
POWER TABLE FILENAME = flash:/c1550-k9w8-mx.153-3.JA/J5.bin
Radio2 not present 0 0 0 0 0 11
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP1552EU-N-K9 (PowerPC 8349) processor (revision A0) with 98294K/32768K bytes of memory.
Processor board ID FTX1824P030
PowerPC 8349 CPU at 533Mhz, revision number 0x0031
Last reset from unknown reload cause - ptr to non-ascii bytes 0x17
LWAPP image version 8.0.100.0
4 Gigabit Ethernet interfaces
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: B0:00:B4:61:A2:20
Part Number : 73-13538-02
PCA Assembly Number : 800-31224-01
PCA Revision Number : 03
PCB Serial Number : FOC18159782
Top Assembly Part Number : 800-38848-03
Top Assembly Serial Number : FTX1824P030
Top Revision Number : A0
Product/Model Number : AIR-CAP1552EU-N-K9
% Please define a domain-name first.
Spanning Tree protocol for Bridge Group 1 has not been configured.
Press RETURN to get started!
*Mar 1 00:00:08.539: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
*Mar 1 00:00:09.299: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (1-6)
*Mar 1 00:00:09.299: Registering HW DTLS
*Mar 1 00:00:09.731: m8349_ether_enable: MACCFG1 sync timeout
*Mar 1 00:00:11.527: %LINK-6-UPDOWN: Interface Ethernet4, changed state to up
*Mar 1 00:00:12.395: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:12.403: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:12.403: %LINK-6-UPDOWN: Interface GigabitEthernet1, changed state to up
*Mar 1 00:00:12.403: %LINK-6-UPDOWN: Interface GigabitEthernet2, changed state to up
*Mar 1 00:00:12.403: %LINK-6-UPDOWN: Interface GigabitEthernet3, changed state to up
*Mar 1 00:00:15.263: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:15.451: AP Mesh platform identified (backhaul config:0x2, access:0xF)
*Mar 1 00:00:15.519: Starting Ethernet promiscuous mode
*Mar 1 00:00:18.083: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1550 Software (C1520-K9W8-M), Version 15.3(3)JA, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 15-Aug-14 13:50 by prod_rel_team
*Mar 1 00:00:18.083: %SNMP-5-COLDSTART: SNMP agent on host APb000.b461.a220 is undergoing a cold start
*Mar 1 00:00:18.503: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:18.543: Starting Ethernet promiscuous mode
*Mar 1 00:00:18.707: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:18.707: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to uplwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:19.431: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:20.011: %CDP_PD-4-POWER_OK: Full power - INJECTOR_DETECTED inline power source
*Mar 1 00:00:20.311: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet4, changed state to up
*Mar 1 00:00:21.495: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:36.571: Currently running a Release Image
*Mar 1 00:00:36.583: Using SHA-1 signed certificate for image signing validation.
%Error opening flash:/capwap-saved-config (No such file or directory)
*Mar 1 00:00:41.003: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 514 CLI Request Triggered
*Mar 1 00:00:41.011: %MESH-6-ADJACENCY_STATE_MACHINE_STARTED: Mesh adjacency state machine started
*Mar 1 00:00:41.015: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:42.107: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
Not in Bound state.
*Mar 1 00:00:42.115: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:43.023: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar 1 00:00:43.107: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:43.215: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:44.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:00:46.043: %LWAPP-3-LWAPP_INTERFACE_GOT_IP_ADDRESS: Interface BVI1 obtained IP from DHCP...
*Mar 1 00:00:46.043: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar 1 00:00:46.095: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.199.119.147, mask 255.255.255.192, hostname APb000.b461.a220
*Mar 1 00:00:46.095: %LWAPP-3-LWAPP_INTERFACE_GOT_IP_ADDRESS: Interface BVI1 obtained IP from DHCP...
*Mar 1 00:00:46.095: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar 1 00:00:51.135: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Mar 1 00:00:51.151: %LWAPP-4-CLIENTEVENTLOG: Not sending change state post as the radio admin is down, lrad state = 5
*Mar 1 00:00:51.151: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar 1 00:00:52.151: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
Translating "CISCO-CAPWAP-CONTROLLER."...domain server (10.207.15.11)
*Mar 1 00:00:55.831: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.207.15.23 obtained through DHCP
*Sep 16 02:30:49.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.207.15.23 peer_port: 5246
*Sep 16 02:30:49.559: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.207.15.23 peer_port: 5246
*Sep 16 02:30:49.559: %CAPWAP-5-SENDJOIN: sending Join Request to 10.207.15.23
*Sep 16 02:30:50.759: %LWAPP-3-CLIENTERRORLOG: Load Reap Cfg failed, trying backup...
*Sep 16 02:30:50.775: %LWAPP-4-CLIENTEVENTLOG:
Checksum required saved version = 8.0.100.0, file flash:/lwapp_reap.cfg
*Sep 16 02:30:50.779: %LWAPP-4-CLIENTEVENTLOG: No REAP non-ap specific configuration file to load. Connect to controller to get configuration file
*Sep 16 02:30:52.215: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Sep 16 02:30:52.223: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Sep 16 02:30:52.651: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller XVD-WLC-5508-02
*Sep 16 02:30:52.691: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
*Sep 16 02:30:52.695: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
*Sep 16 02:30:52.695: %LWAPP-4-CLIENTEVENTLOG: No LS Flex ACL map configuration file to load. Connect to controller to get configuration file
*Sep 16 02:30:52.695: %LWAPP-4-CLIENTEVENTLOG: No Central Dhcp map configuration file to load. Connect to controller to get configuration filecapwap_delete_all_l2Acls_in_nacl_list:336. Deleting all L2Acls in AP config
*Sep 16 02:30:53.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Sep 16 02:30:53.243: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Sep 16 02:30:53.867: %LWAPP-4-CLIENTEVENTLOG: Not sending change state post as the radio admin is down, lrad state = 2
*Sep 16 02:30:53.867: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Sep 16 02:30:54.127: %WIDS-6-ENABLED: IDS Signature is loaded and enabled
*Sep 16 02:30:54.871: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Sep 16 02:30:55.895: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Sep 16 02:30:56.895: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to upRename from flash:/lwapp_reap.cfg to flash:/lwapp_reap.cfg.bak failed, errorno = 2
*Sep 16 02:31:14.119: %CLEANAIR-6-STATE: Slot 1 disabled
*Sep 16 02:38:12.379: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Sep 16 02:38:12.387: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Sep 16 02:38:13.055: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Sep 16 02:38:13.407: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Sep 16 02:38:14.387: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Sep 16 02:38:15.339: %LWAPP-4-CLIENTEVENTLOG: Not sending change state post as the radio admin is down, lrad state = 2
Writing out the event log to flash:/event.log ...
*Sep 16 02:38:24.375: %SYS-5-RELOAD: Reload requested by CAPWAP CLIENT. Reload Reason: Recvd RESET req from Controller.
*Sep 16 02:38:24.387: %LWAPP-5-CHANGED: CAPWAP changed state to DOWN
Write of event.log done
IOS Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 39 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31868928
flashfs[0]: Bytes used: 10195456
flashfs[0]: Bytes available: 21673472
flashfs[0]: flashfs fsck took 17 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC address: b0:00:b4:61:a2:20
Loading "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-mx.153-3.JA"...############
File "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-mx.153-3.JA" uncompressed and installed, entry point: 0x3000
executing...
IOS Secondary Bootloader - Starting system.
Xmodem file system is available.
flashfs[0]: 39 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31868928
flashfs[0]: Bytes used: 10195456
flashfs[0]: Bytes available: 21673472
flashfs[0]: flashfs fsck took 5 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC address: b0:00:b4:61:a2:20
Boot CMD: 'boot flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA;flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA'
Loading "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA"...################################
File "flash:/c1550-k9w8-mx.153-3.JA/c1550-k9w8-xx.153-3.JA" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1550 Software (C1520-K9W8-M), Version 15.3(3)JA, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 15-Aug-14 13:50 by prod_rel_team
Initializing flashfs...
flashfs[2]: 39 files, 3 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 31610880
flashfs[2]: Bytes used: 10195456
flashfs[2]: Bytes available: 21415424
flashfs[2]: flashfs fsck took 6 seconds.
flashfs[2]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 5806080
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 5805056
flashfs[4]: flashfs fsck took 1 seconds.
flashfs[4]: Initialization complete....done Initializing flashfs.
Radio0 present 8364B 8000 A8020000 0 A8030000 30
Rate table has 336 entries (20 legacy/64 11n/252 11ac)
POWER TABLE FILENAME = flash:/c1550-k9w8-mx.153-3.JA/J2.bin
Radio1 present 8364B 8000 B8020000 0 B8030000 13
POWER TABLE FILENAME = flash:/c1550-k9w8-mx.153-3.JA/J5.bin
Radio2 not present 0 0 0 0 0 11
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP1552EU-N-K9 (PowerPC 8349) processor (revision A0) with 98294K/32768K bytes of memory.
Processor board ID FTX1824P030
PowerPC 8349 CPU at 533Mhz, revision number 0x0031
Last reset from unknown reload cause - ptr to non-ascii bytes 0x18
LWAPP image version 8.0.100.0
4 Gigabit Ethernet interfaces
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: B0:00:B4:61:A2:20
Part Number : 73-13538-02
PCA Assembly Number : 800-31224-01
PCA Revision Number : 03
PCB Serial Number : FOC18159782
Top Assembly Part Number : 800-38848-03
Top Assembly Serial Number : FTX1824P030
Top Revision Number : A0
Product/Model Number : AIR-CAP1552EU-N-K9
% Please define a domain-name first.
Spanning Tree protocol for Bridge Group 1 has not been configured.
Press RETURN to get started!
*Mar 1 00:00:08.563: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
*Mar 1 00:00:09.323: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (1-6)
*Mar 1 00:00:09.323: Registering HW DTLS
*Mar 1 00:00:09.759: m8349_ether_enable: MACCFG1 sync timeout
*Mar 1 00:00:11.559: %LINK-6-UPDOWN: Interface Ethernet4, changed state to up
*Mar 1 00:00:12.423: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:12.435: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:12.435: %LINK-6-UPDOWN: Interface GigabitEthernet1, changed state to up
*Mar 1 00:00:12.435: %LINK-6-UPDOWN: Interface GigabitEthernet2, changed state to up
*Mar 1 00:00:12.435: %LINK-6-UPDOWN: Interface GigabitEthernet3, changed state to up
*Mar 1 00:00:15.291: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:15.479: AP Mesh platform identified (backhaul config:0x2, access:0xF)
*Mar 1 00:00:15.547: Starting Ethernet promiscuous mode
*Mar 1 00:00:18.119: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1550 Software (C1520-K9W8-M), Version 15.3(3)JA, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 15-Aug-14 13:50 by prod_rel_team
*Mar 1 00:00:18.119: %SNMP-5-COLDSTART: SNMP agent on host RAP is undergoing a cold start
*Mar 1 00:00:19.459: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:20.035: %CDP_PD-4-POWER_OK: Full power - INJECTOR_DETECTED inline power source
*Mar 1 00:00:20.335: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet4, changed state to up
*Mar 1 00:00:21.519: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:22.163: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:22.203: Starting Ethernet promiscuous mode
*Mar 1 00:00:22.367: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:22.367: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to uplwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:36.603: Currently running a Release Image
*Mar 1 00:00:36.615: Using SHA-1 signed certificate for image signing validation.
*Mar 1 00:00:41.023: %MESH-6-ADJACENCY_STATE_MACHINE_STARTED: Mesh adjacency state machine started
*Mar 1 00:00:41.027: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:00:41.035: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 514 CLI Request Triggered
*Mar 1 00:00:41.043: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:42.119: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
Not in Bound state.
*Mar 1 00:00:42.127: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:43.035: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar 1 00:00:43.119: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:43.227: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:44.227: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:00:46.051: %LWAPP-3-LWAPP_INTERFACE_GOT_IP_ADDRESS: Interface BVI1 obtained IP from DHCP...
*Mar 1 00:00:46.051: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar 1 00:00:46.107: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.199.119.149, mask 255.255.255.192, hostname RAP
*Mar 1 00:00:46.107: %LWAPP-3-LWAPP_INTERFACE_GOT_IP_ADDRESS: Interface BVI1 obtained IP from DHCP...
*Mar 1 00:00:46.107: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Mar 1 00:00:51.147: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Mar 1 00:00:51.211: %LWAPP-4-CLIENTEVENTLOG: Not sending change state post as the radio admin is down, lrad state = 5
Translating "CISCO-CAPWAP-CONTROLLER."...domain server (10.207.15.11)
*Mar 1 00:00:51.215: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar 1 00:00:52.211: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.207.15.23 obtained through DHCP
*Mar 1 00:00:52.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:52.219: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Mar 1 00:00:52.227: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:53.219: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:53.247: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:54.247: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Sep 16 02:40:24.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.207.15.23 peer_port: 5246
*Sep 16 02:40:24.555: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.207.15.23 peer_port: 5246
*Sep 16 02:40:24.555: %CAPWAP-5-SENDJOIN: sending Join Request to 10.207.15.23
*Sep 16 02:40:24.771: %LWAPP-4-CLIENTEVENTLOG:
Checksum required saved version = 8.0.100.0, file flash:/lwapp_reap.cfg
*Sep 16 02:40:26.219: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Sep 16 02:40:26.227: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Sep 16 02:40:26.443: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Sep 16 02:40:26.595: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller XVD-WLC-5508-02
*Sep 16 02:40:26.639: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
*Sep 16 02:40:26.639: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
*Sep 16 02:40:26.639: %LWAPP-4-CLIENTEVENTLOG: No LS Flex ACL map configuration file to load. Connect to controller to get configuration file
*Sep 16 02:40:26.639: %LWAPP-4-CLIENTEVENTLOG: No Central Dhcp map configuration file to load. Connect to controller to get configuration filecapwap_delete_all_l2Acls_in_nacl_list:336. Deleting all L2Acls in AP config
*Sep 16 02:40:27.219: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
Regards,
WillAustralia and the AP seems to be in the correct country. The Operational Status is "REG" on both AP's.
-
Hi, I've just installed MEP and I'm following the installation guide.
When I try to run the MusicDB client on WTK emulator I get this error:
Sync failed: UnExpected Status:400
In admin panel I have this log. What's wrong?
Thanks in advance, Marco
[UPDATE]
I've found the problem is database related.
This is what I get in synchronica.log:
Exception [TOPLINK-4002] (Oracle TopLink Essentials - 2.0.1 (Build b05-p01 (04/27/2008))): oracle.toplink.essentials.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: Table 'gwdb.GW_CLIENTMAPPING' doesn't exist
Error Code: 1146
Call: SELECT PRINCIPAL, SYNCSOURCE, LUID, GUID, SYNCMODIFIED, DIGEST, FOLDER FROM GW_CLIENTMAPPING WHERE ((PRINCIPAL = ?) AND (SYNCSOURCE = ?))
So I suppose the install script was unable to create one or more tables.
I'm using MySQL 5.0.60 on Linux
[UPDATE]
sync session at: Thu Aug 07 12:18:58 UTC 2008
synchronica.log
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncSessionListener] Method sessionCreated() was called
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [SyncSessionListener] HTTP session started [d1b061d5134a005656fc60b5038d]
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [SyncServlet] HTTP POST session ID is d1b061d5134a005656fc60b5038d
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [SyncServlet] [>] Content-Type: application/vnd.syncml+xml
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [SyncServlet] [>] Content-Length: -1
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [SyncServlet] [>] Transfer-Encoding chunked: true
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [SyncServlet] [>] User-Agent: null
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncContextFinder] Creating application context attribute 'syncBeand1b061d5134a005656fc60b5038d'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [XmlDeviceConfigFactory] Used DDC device : ?, ?
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [XmlDeviceConfigFactory] Found DDC properties : {email.folders=, calendar.correctReminderTimeShifts=true, sync.timeout.request=60000, email.dataStores=, contacts.maximumFillForEmptyPhoneNumbers=0, calendar.sendGmtAsLocalTime=false, contacts.dataStores=[<dataStore contentClass="contacts" uri="./Contacts" pushSupported="false" pushContentType="text/x-vcard"/>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardSyncConfig] sync.timeout.request loaded: 60000
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardSyncConfig] sync.timeout.draining loaded: 50000
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardSyncConfig] sync.busySignaling loaded: emptySync
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [StandardSyncUseCase] Created SyncBean for session d1b061d5134a005656fc60b5038d
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [PersistentStore] Cache hit for admin property 'version'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [PersistentStore] Cache hit for admin property 'build'
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [StandardSyncUseCase] =======================================================================
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [StandardSyncUseCase] Synchronica SyncML Gateway 3.1.31 (build 20080628-0457)
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [StandardSyncUseCase] =======================================================================
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncBean] Setting session callback to retrieve old sync sessions
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardSyncUseCase] Starting database transaction before sync
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardSyncUseCase] Starting sync computation
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardByteArraySync] sync computation started with request byte array length = 662
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [SyncLog] [>] Received request, length: 662, content type: application/vnd.syncml+xml
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 3c 53 79 6e 63 4d 4c 3e 3c 53 79 6e 63 48 64 72 : <SyncML><SyncHdr
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 3e 3c 56 65 72 44 54 44 3e 31 2e 32 3c 2f 56 65 : ><VerDTD>1.2</Ve
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 72 44 54 44 3e 3c 56 65 72 50 72 6f 74 6f 3e 53 : rDTD><VerProto>S
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 79 6e 63 4d 4c 2f 31 2e 32 3c 2f 56 65 72 50 72 : yncML/1.2</VerPr
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 6f 74 6f 3e 3c 53 65 73 73 69 6f 6e 49 44 3e 31 : oto><SessionID>1
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 32 31 38 31 31 31 35 33 38 36 38 32 3c 2f 53 65 : 218111538682</Se
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 73 73 69 6f 6e 49 44 3e 3c 4d 73 67 49 44 3e 31 : ssionID><MsgID>1
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 3c 2f 4d 73 67 49 44 3e 3c 54 61 72 67 65 74 3e : </MsgID><Target>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 3c 4c 6f 63 55 52 49 3e 68 74 74 70 3a 2f 2f 6c : <LocURI>http://l
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 6f 63 61 6c 68 6f 73 74 3a 38 30 38 30 2f 73 79 : ocalhost:8080/sy
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 6e 63 3c 2f 4c 6f 63 55 52 49 3e 3c 2f 54 61 72 : nc</LocURI></Tar
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 67 65 74 3e 3c 53 6f 75 72 63 65 3e 3c 4c 6f 63 : get><Source><Loc
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 55 52 49 3e 31 37 30 37 31 31 32 35 35 36 37 31 : URI>170711255671
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 39 34 37 3c 2f 4c 6f 63 55 52 49 3e 3c 2f 53 6f : 947</LocURI></So
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 75 72 63 65 3e 3c 43 72 65 64 3e 3c 4d 65 74 61 : urce><Cred><Meta
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 3e 3c 54 79 70 65 3e 73 79 6e 63 6d 6c 3a 61 75 : ><Type>syncml:au
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 74 68 2d 62 61 73 69 63 3c 2f 54 79 70 65 3e 3c : th-basic</Type><
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 2f 4d 65 74 61 3e 3c 44 61 74 61 3e 62 57 46 79 : /Meta><Data>bWFy
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 59 32 38 75 62 57 39 75 64 47 56 7a 61 55 42 6e : Y28ubW9udGVzaUBn
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 62 57 46 70 62 43 35 6a 62 32 30 36 62 58 56 7a : bWFpbC5jb206bXVz
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 61 57 4e 6b 59 6e 42 68 63 33 4d 3d 3c 2f 44 61 : aWNkYnBhc3M=</Da
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 74 61 3e 3c 2f 43 72 65 64 3e 3c 4d 65 74 61 3e : ta></Cred><Meta>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 3c 4d 61 78 4d 73 67 53 69 7a 65 3e 36 31 34 34 : <MaxMsgSize>6144
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 30 30 3c 2f 4d 61 78 4d 73 67 53 69 7a 65 3e 3c : 00</MaxMsgSize><
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 2f 4d 65 74 61 3e 3c 2f 53 79 6e 63 48 64 72 3e : /Meta></SyncHdr>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 3c 53 79 6e 63 42 6f 64 79 3e 3c 41 6c 65 72 74 : <SyncBody><Alert
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 3e 3c 43 6d 64 49 44 3e 31 3c 2f 43 6d 64 49 44 : ><CmdID>1</CmdID
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 3e 3c 44 61 74 61 3e 32 30 31 3c 2f 44 61 74 61 : ><Data>201</Data
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 3e 3c 49 74 65 6d 3e 3c 54 61 72 67 65 74 3e 3c : ><Item><Target><
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 4c 6f 63 55 52 49 3e 2e 2f 46 69 6c 65 73 3c 2f : LocURI>./Files</
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 4c 6f 63 55 52 49 3e 3c 2f 54 61 72 67 65 74 3e : LocURI></Target>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 3c 53 6f 75 72 63 65 3e 3c 4c 6f 63 55 52 49 3e : <Source><LocURI>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 66 69 6c 65 73 3c 2f 4c 6f 63 55 52 49 3e 3c 2f : files</LocURI></
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 53 6f 75 72 63 65 3e 3c 4d 65 74 61 3e 3c 41 6e : Source><Meta><An
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 63 68 6f 72 3e 3c 4c 61 73 74 3e 31 32 33 34 35 : chor><Last>12345
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 36 37 38 3c 2f 4c 61 73 74 3e 3c 4e 65 78 74 3e : 678</Last><Next>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 31 32 31 38 31 31 31 35 33 38 36 38 32 3c 2f 4e : 1218111538682</N
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 65 78 74 3e 3c 2f 41 6e 63 68 6f 72 3e 3c 2f 4d : ext></Anchor></M
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 65 74 61 3e 3c 2f 49 74 65 6d 3e 3c 2f 41 6c 65 : eta></Item></Ale
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 72 74 3e 3c 46 69 6e 61 6c 3e 3c 2f 46 69 6e 61 : rt><Final></Fina
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 6c 3e 3c 2f 53 79 6e 63 42 6f 64 79 3e 3c 2f 53 : l></SyncBody></S
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>] 79 6e 63 4d 4c 3e : yncML>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardByteArraySync] Constructing new SyncML message for protocol version: '1.2', equal to '1.2' = true
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [XMLPullXmlOperation] findElementByName: compare elem='SyncML' with search='SyncML'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [XMLPullXmlOperation] findElementByName: found match
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] logMessageRequest
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <SyncML xmlns='SYNCML:SYNCML1.2'>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <SyncHdr>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <VerDTD>1.2</VerDTD>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <VerProto>SyncML/1.2</VerProto>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <SessionID>1218111538682</SessionID>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <MsgID>1</MsgID>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Target>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <LocURI>http://localhost:8080/sync</LocURI>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] </Target>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Source>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <LocURI>170711255671947</LocURI>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] </Source>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Cred>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Meta>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Format xmlns='syncml:metinf'>b64</Format>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Type xmlns='syncml:metinf'>syncml:auth-basic</Type>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] </Meta>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Data>*****</Data>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] </Cred>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Meta><MaxMsgSize xmlns='syncml:metinf'>614400</MaxMsgSize></Meta>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] </SyncHdr>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <SyncBody>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Alert><CmdID>1</CmdID>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Data>201</Data>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Item>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Target>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <LocURI>./Files</LocURI>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] </Target>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Source>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <LocURI>files</LocURI>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] </Source>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Meta><Anchor xmlns='syncml:metinf'>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Last>12345678</Last>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Next>1218111538682</Next>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] </Anchor>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] </Meta>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] </Item>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] </Alert>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] <Final/>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] </SyncBody>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [>>] </SyncML>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardMessageSync] sync computation started with request message
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [session] Authentication type: syncml:auth-basic
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Username: [email protected]
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [MeasuringPersistentStore] DB READING, method 'readUser2'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [JPAPersistentStore] findUserConnections 10
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [JPAPersistentStore] fillMailer
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [EmailPreferences] Read knownContactsOnly := null
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] User (with basic authentication) found in database: com.synchronica.ds.persistence.jpa.beans.GatewayUser@b370cd20 --> try specific login
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Try login with username='[email protected]' and backend='JCR'
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [SyncLoginModule] Trying specific login for username='[email protected]', back-end='JCR'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SimpleBackendContext] read DB preference: 'usingJcr'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [PersistentStore] Cache hit for admin property 'usingJcr'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLoginModule] Attempting to login using username only: '[email protected]', defaultUrlFromDatabase is 'null'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [LoginHelper] Default URL is not set --> ignoring default or inlined URL
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [LoginHelper] email: '[email protected]'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [LoginHelper] userName: 'musicdbuser'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [LoginHelper] baseUrl: 'jcr://filesystem/TEST_WORKSPACE'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [LoginHelper] firstName: ''
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [LoginHelper] lastName: ''
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [LoginHelper] back-end: 'JCR'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [LoginHelper] Found user in internal database: '[email protected]' [JCR]
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [AbstractBackendUserLogin] Attempting to login back-end user: '[email protected]' [JCR]
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [JcrUserLogin] Logging in to user-defined JCR repository workspace 'jcr://filesystem/TEST_WORKSPACE'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [JcrUserLogin] USED_TIME 'loginInitially' --> 1
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [SyncLoginModule] successful login for [email protected], back-end=JCR
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Using device ID: '170711255671947' for principal '[email protected]'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [XmlDeviceTacInterpreter] 8 digit TAC: 17071125
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [XmlDeviceTacInterpreter] 6 digit TAC: 170711
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [DeviceInfoFactory] could not get device model (was null) for device ID '170711255671947' --> take '?' as device manufacturer and model name
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [DeviceInfoFactory] Device ID '170711255671947' --> manufacturer '?', model '?'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [DynamicDeviceConfig] Setting the device model to 'StandardDeviceModel <man=? mod=?>' for the dynamic device configuration
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [XmlDeviceConfigFactory] Used DDC device : ?, ?
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [XmlDeviceConfigFactory] Found DDC properties : {email.folders=, calendar.correctReminderTimeShifts=true, sync.timeout.request=60000, email.dataStores=, contacts.maximumFillForEmptyPhoneNumbers=0, calendar.sendGmtAsLocalTime=false, contacts.dataStores=[<dataStore contentClass="contacts" uri="./Contacts" pushSupported="false" pushContentType="text/x-vcard"/>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardSyncConfig] sync.timeout.request loaded: 60000
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardSyncConfig] sync.timeout.draining loaded: 50000
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardSyncConfig] sync.busySignaling loaded: emptySync
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [device] Registered client device model, refined dynamic device configuration.
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [PersistentStore] principal id=null [email protected]
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [PersistentStore] find principal by email/device [[email protected]/170711255671947]
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [MeasuringPersistentStore] DB READING, method 'findPrincipalByUserDevice'
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [PersistentStore] Read principal from email/device
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [PersistentStore] email: [email protected]
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [PersistentStore] username: null
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Session authentication status=STATUS_CODE_212_Authentication_accepted
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [ClassicDatabase] Initializing database with serverUri='./Files' clientUri='files'.
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [JcrBackendDataStoreFactory] Creating JCR file back-end data store
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Added database=[Database userId='[email protected]' serverUri='./Files' clientUri='files'.] to session.
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Checking for <Final> in body
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Finalise package #1
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [session] Closing OMA DS package #1
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] entering drainRequestActionQueue, isResponseSuppressed = false
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Executing action=[AlertAction for command=Alert, cmdId=1, msgId=1].
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [MeasuringPersistentStore] DB READING, method 'readLastTimestamp'
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [PersistentStore] Last timestamp not found: principal=1 database=default
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [ClassicDatabase] Read anchor for database; source=default tag=[none] start=null end=null
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [ClassicDatabase] LastTimestamp: tag=[none] source=default startDate=null endDate=null
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [ClassicDatabase] anchor: last: '12345678', next: '1218111538682'
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [ClassicDatabase] Clear mappings for slow sync
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [MeasuringPersistentStore] DB READING, method 'findClientMappingsByPrincipalSyncSource'
12:18:58 [d1b061d5134a005656fc60b5038d] WARN [session] Action failed=[AlertAction for command=Alert, cmdId=1, msgId=1]. --> setting status code to 500 (COMMAND_FAILED) and continue
12:18:58 [d1b061d5134a005656fc60b5038d] WARN [session] Action failed by reason:
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Now collecting status for command name=Alert cmdId='1' msgId='1'.
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Collected statusCode=STATUS_CODE_500_Command_failed (complete).
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Add status to response, command: Alert, status: 500
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Add command: Status as status command to queue
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Executing action=[FinalInitializationAction for command=null, cmdId=null, msgId=1].
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [FinalInitializationAction] Selecting device information DTD: '1.2'
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [FinalInitializationAction] Requesting device info from client: ./devinf12
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Add command: Get as normal command to queue
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Add command: Alert as normal command to queue
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] No command for action with statusCode=STATUS_CODE_200_OK
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] entering drainServerModifications
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Start drainResponseCommandQueue
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] MaxMsgSize := 614400
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] spaceLeft := 613804
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Adding response command=Status.
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Adding response command=Get.
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Adding response command=Alert.
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [session] Session is not complete because at least one database is still active
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [session] Closing OMA DS package #2
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardMessageSync] SERIALIZED SyncSession, size = 17692
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardMessageSync] sync computation finished with response message
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardByteArraySync] The synchronization is not complete
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] logMessageResponse
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <SyncML xmlns='SYNCML:SYNCML1.2'>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <SyncHdr>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <VerDTD>1.2</VerDTD>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <VerProto>SyncML/1.2</VerProto>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <SessionID>1218111538682</SessionID>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <MsgID>1</MsgID>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Target>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <LocURI>170711255671947</LocURI>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </Target>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Source>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <LocURI>http://localhost:8080/sync</LocURI>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </Source>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <RespURI>http://localhost:8080/sync;jsessionid=d1b061d5134a005656fc60b5038d</RespURI>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </SyncHdr>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <SyncBody>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Status>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <CmdID>1</CmdID>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <MsgRef>1</MsgRef>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <CmdRef>0</CmdRef>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Cmd>SyncHdr</Cmd>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <TargetRef>http://localhost:8080/sync</TargetRef>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <SourceRef>170711255671947</SourceRef>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Data>212</Data>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </Status>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Status>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <CmdID>2</CmdID>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <MsgRef>1</MsgRef>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <CmdRef>1</CmdRef>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Cmd>Alert</Cmd>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <TargetRef>./Files</TargetRef>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <SourceRef>files</SourceRef>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Data>500</Data>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </Status>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Get>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <CmdID>3</CmdID>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Meta><Type xmlns='syncml:metinf'>application/vnd.syncml-devinf+xml</Type></Meta>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Item>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Target>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <LocURI>./devinf12</LocURI>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </Target>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </Item>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </Get>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Alert><CmdID>4</CmdID>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Data>201</Data>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Item>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Target>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <LocURI>files</LocURI>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </Target>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Source>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <LocURI>./Files</LocURI>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </Source>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Meta><MaxObjSize xmlns='syncml:metinf'>1000000</MaxObjSize><Anchor xmlns='syncml:metinf'>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Last>[none]</Last>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Next>1218111538682</Next>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </Anchor>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </Meta>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </Item>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </Alert>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] <Final/>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </SyncBody>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<<] </SyncML>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [StandardByteArraySync] Sync session is not complete, expecting next request from client
12:18:58 [d1b061d5134a005656fc60b5038d] INFO [SyncLog] [<] Sending back response, length: 1257, content type: application/vnd.syncml+xml
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 3c 53 79 6e 63 4d 4c 20 78 6d 6c 6e 73 3d 27 53 : <SyncML xmlns='S
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 59 4e 43 4d 4c 3a 53 59 4e 43 4d 4c 31 2e 32 27 : YNCML:SYNCML1.2'
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 3e 0a 3c 53 79 6e 63 48 64 72 3e 0a 3c 56 65 72 : >.<SyncHdr>.<Ver
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 44 54 44 3e 31 2e 32 3c 2f 56 65 72 44 54 44 3e : DTD>1.2</VerDTD>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 0a 3c 56 65 72 50 72 6f 74 6f 3e 53 79 6e 63 4d : .<VerProto>SyncM
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 4c 2f 31 2e 32 3c 2f 56 65 72 50 72 6f 74 6f 3e : L/1.2</VerProto>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 0a 3c 53 65 73 73 69 6f 6e 49 44 3e 31 32 31 38 : .<SessionID>1218
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 31 31 31 35 33 38 36 38 32 3c 2f 53 65 73 73 69 : 111538682</Sessi
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 6f 6e 49 44 3e 0a 3c 4d 73 67 49 44 3e 31 3c 2f : onID>.<MsgID>1</
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 4d 73 67 49 44 3e 0a 3c 54 61 72 67 65 74 3e 0a : MsgID>.<Target>.
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 3c 4c 6f 63 55 52 49 3e 31 37 30 37 31 31 32 35 : <LocURI>17071125
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 35 36 37 31 39 34 37 3c 2f 4c 6f 63 55 52 49 3e : 5671947</LocURI>
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 0a 3c 2f 54 61 72 67 65 74 3e 0a 3c 53 6f 75 72 : .</Target>.<Sour
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 63 65 3e 0a 3c 4c 6f 63 55 52 49 3e 68 74 74 70 : ce>.<LocURI>http
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUG [SyncLog] [<] 3a 2f 2f 6c 6f 63 61 6c 68 6f 73 74 3a 38 30 38 : ://localhost:808
12:18:58 [d1b061d5134a005656fc60b5038d] DEBUI've MusicDB sample running finally!
The problem was that: MySQL has a known bug and can't handle indexes bigger than a certain size.
When server charset is set to utf8 it's easy to reach this limit and so did the installation script.
Using latin1 charset installation process was able to create all needed tables correctly.
Hope can help. -
Server rebooting due to JAVA error.
Hi
I am sukrut and I have been experiencing some problem on my Fire V880 system.Actually from last day's my server is rebooting auotomatically and when I am trying to investigate the error I am getting following output.
BAD TRAP: type=31 rp=2a1026247c0 addr=0 mmu_fsr=0 occurred in module "unix" due to a NULL pointer dereference
Thanks
SukrutJan 5 15:02:51 nova ^Mpanic[cpu0]/thread=3000854d740:
Jan 5 15:02:51 nova unix: [ID 340138 kern.notice] BAD TRAP: type=31 rp=2a10238a7b0 addr=0 mmu_fsr=0 occurred in module "genunix" due to a NULL pointer dereference
Jan 5 15:02:51 nova unix: [ID 100000 kern.notice]
Jan 5 15:02:51 nova unix: [ID 839527 kern.notice] oracle:
Jan 5 15:02:51 nova unix: [ID 520581 kern.notice] trap type = 0x31
Jan 5 15:02:52 nova unix: [ID 101969 kern.notice] pid=15679, pc=0x10122a58, sp=0x2a10238a051, tstate=0x80001601, context=0x455
Jan 5 15:02:52 nova unix: [ID 743441 kern.notice] g1-g7: ff00, 2000, 0, ffffffff00000000, 0, 0, 3000854d740
Jan 5 15:02:52 nova unix: [ID 100000 kern.notice]
Jan 5 15:02:52 nova genunix: [ID 723222 kern.notice] 000002a10238a3c0 unix:die+80 (31, 0, 10415278, 0, 2a10238a7b0, c458e000)
Jan 5 15:02:52 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000000000008 0000030001d27cc0 0000030003363838 0000030001d44000
Jan 5 15:02:52 nova %l4-7: 000000000000000a 0000000000000020 0000000000000000 0000030003363708
Jan 5 15:02:52 nova genunix: [ID 723222 kern.notice] 000002a10238a4a0 unix:trap+8b8 (0, 1, 5, 0, 2a10238a7b0, 0)
Jan 5 15:02:52 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000000000001 0000030002248038 00000300065ecac8 0000000000000000
Jan 5 15:02:52 nova %l4-7: 0000000000000031 0000030008cec0e8 0000000000010000 000002a10238b520
Jan 5 15:02:53 nova genunix: [ID 723222 kern.notice] 000002a10238a5e0 unix:sfmmu_tsb_miss+66c (10429b30, 0, 300001aff88, 0, 300001aff88, 19)
Jan 5 15:02:53 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 0000000000000004 0000000000000010 00000310001ff100
Jan 5 15:02:53 nova %l4-7: 0000000000000000 0000000000000000 0000000000000000 0000000000000003
Jan 5 15:02:53 nova genunix: [ID 723222 kern.notice] 000002a10238a700 unix:prom_rtt+0 (30000468000, 300050aef18, c211c000, c211a000, 300050aef18, c211a000)
Jan 5 15:02:54 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000000000002 0000000000001400 0000000080001601 000000001001a898
Jan 5 15:02:54 nova %l4-7: 000000001044bc20 000000001044bc00 0000000000000000 000002a10238a7b0
Jan 5 15:02:54 nova genunix: [ID 723222 kern.notice] 000002a10238a850 genunix:vmem_xalloc+4d8 (30000468000, 30000468408, ffffff, ffffffff, c0000000, c0000000)
Jan 5 15:02:54 nova genunix: [ID 179002 kern.notice] %l0-3: 0000030003973038 ffffffffffffe000 0000030000468000 0000000000002000
Jan 5 15:02:54 nova %l4-7: 00000300050aef18 0000000000000000 000002a10238b750 00000000e5798000
Jan 5 15:02:54 nova genunix: [ID 723222 kern.notice] 000002a10238a980 pcisch:pci_dma_map_impl+91c (1, 1, 1, 0, 30003972f48, 3000018cc50)
Jan 5 15:02:55 nova genunix: [ID 179002 kern.notice] %l0-3: 000002a10238ac20 0000000000000001 00000300001b9688 0000000000000001
Jan 5 15:02:55 nova %l4-7: 0000000000000001 0000030003973038 0000000000000000 0000000000000000
Jan 5 15:02:55 nova genunix: [ID 723222 kern.notice] 000002a10238aab0 pcisch:pci_dma_bindhdl+38 (3000018d190, 3000018cc50, 30003972f48, 2a10238ac20, 30003363718, 30003363730)
Jan 5 15:02:55 nova genunix: [ID 179002 kern.notice] %l0-3: 000003000018d190 00000300021f5008 0000000008000000 000003000586cf44
Jan 5 15:02:55 nova %l4-7: 0000000000000000 0000000000000004 000000001041cdc8 0000000000000000
Jan 5 15:02:55 nova genunix: [ID 723222 kern.notice] 000002a10238ab70 genunix:ddi_dma_buf_bind_handle+e8 (30003972f48, 3000586ce30, 12, 0, 0, 30003363718)
Jan 5 15:02:56 nova genunix: [ID 179002 kern.notice] %l0-3: 000003000046f440 00000000000000f9 00000000000000f9 00000300021f5048
Jan 5 15:02:56 nova %l4-7: 00000300021f5068 0000030007d3db20 00000300021f4f70 0000000008f9c010
Jan 5 15:02:56 nova genunix: [ID 723222 kern.notice] 000002a10238ac60 glm:glm_scsi_init_pkt+1ec (30003363708, 30003363718, 0, 0, 0, 10)
Jan 5 15:02:56 nova genunix: [ID 179002 kern.notice] %l0-3: 000003000586ce30 0000030001d27cc0 0000030003363838 0000030001d44000
Jan 5 15:02:56 nova %l4-7: 000000000000000a 0000000000000020 0000000000000000 0000030003363708
Jan 5 15:02:56 nova genunix: [ID 723222 kern.notice] 000002a10238ad20 scsi:scsi_init_pkt+54 (30001d27cc0, 30001d047d0, 10220b0c, a, 20, 10)
Jan 5 15:02:57 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000010253dfc 0000030002248038 00000000e5798000 000003000430cde8
Jan 5 15:02:57 nova %l4-7: 000003000430cde8 00000000e5798000 000002a763904000 000002a10238b520
Jan 5 15:02:57 nova genunix: [ID 723222 kern.notice] 000002a10238adf0 sd:make_sd_cmd+120 (10220b0c, 3000586ce30, 0, 30001d047d0, a, 0)
Jan 5 15:02:57 nova genunix: [ID 179002 kern.notice] %l0-3: 0000030008cec0e8 0000000008fa0290 0000000000000010 00000000e5798000
Jan 5 15:02:57 nova %l4-7: 00000300002c9f50 0000000000000000 00000310046cc600 0000030002fe1890
Jan 5 15:02:58 nova genunix: [ID 723222 kern.notice] 000002a10238aec0 sd:sdstart+2cc (ffffffffffffffff, 0, 1, 1000000, 10000, 0)
Jan 5 15:02:58 nova genunix: [ID 179002 kern.notice] %l0-3: 0000030001d04b2e 0000000000000005 0000030001d049a0 0000030001d047d0
Jan 5 15:02:58 nova %l4-7: 0000030001d048d0 000003000586ce30 0000000000000000 0000000000000000
Jan 5 15:02:58 nova genunix: [ID 723222 kern.notice] 000002a10238af70 sd:sdstrategy+670 (30001d048d0, 10156520, 2a10238b0d8, 0, 0, 3000586ce30)
Jan 5 15:02:58 nova genunix: [ID 179002 kern.notice] %l0-3: 0000030001d047d0 0000000000000000 0000000000002000 000003000430cd58
Jan 5 15:02:58 nova %l4-7: 000002a763904000 0000000000000000 000002a10238b750 00000000e5798000
Jan 5 15:02:58 nova genunix: [ID 723222 kern.notice] 000002a10238b020 genunix:bdev_strategy+94 (1042fe48, 3000586ce30, 20, 0, 0, 0)
Jan 5 15:02:59 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000010218e2c 0000030008e54000 000003000430cde8 000003000830aec0
Jan 5 15:02:59 nova %l4-7: 00000300001b99c0 000002a763904000 0000000000000000 0000000000000000
Jan 5 15:02:59 nova genunix: [ID 723222 kern.notice] 000002a10238b0f0 rdriver:StratStart+2bc (300021f4f70, 30007d3db20, 20, 0, 10419288, 2)
Jan 5 15:02:59 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 00000300021f5008 0000000008000000 000003000586cf44
Jan 5 15:02:59 nova %l4-7: 0000000000000000 0000000000000004 000000001041cdc8 0000000000000000
Jan 5 15:02:59 nova genunix: [ID 723222 kern.notice] 000002a10238b1d0 rdriver:StratOp+44 (300021f4f70, 30007d3db20, 20, 0, f0, 0)
Jan 5 15:03:00 nova genunix: [ID 179002 kern.notice] %l0-3: 00000000104a6c00 00000000000000f9 00000000000000f9 00000300021f5048
Jan 5 15:03:00 nova %l4-7: 00000300021f5068 0000030007d3db20 00000300021f4f70 0000000008f9c010
Jan 5 15:03:00 nova genunix: [ID 723222 kern.notice] 000002a10238b290 rdriver:rd_strategy+218 (30007d3db20, 3000854d740, 2a10238b438, 0, 0, 1ef03)
Jan 5 15:03:00 nova genunix: [ID 179002 kern.notice] %l0-3: 00000300021f4f70 00000000ffffffff 0000000000000000 000002a763906000
Jan 5 15:03:00 nova %l4-7: 0000000000000000 00000300002c9f50 000000001041d000 00000310046cc600
Jan 5 15:03:00 nova genunix: [ID 723222 kern.notice] 000002a10238b380 genunix:bdev_strategy+94 (1042fe48, 30007d3db20, 40, 1, 310046cc600, 2000)
Jan 5 15:03:01 nova genunix: [ID 179002 kern.notice] %l0-3: 000000001028a2c0 0000030002248038 00000000e5798000 000003000430cde8
Jan 5 15:03:01 nova %l4-7: 000003000430cde8 00000000e5798000 000002a763904000 000002a10238b520
Jan 5 15:03:01 nova genunix: [ID 723222 kern.notice] 000002a10238b450 ufs:ufs_getpage_miss+2e4 (30007d3db20, 310046cc600, 1, 2000, 2a10238b750, 3000430cd58)
Jan 5 15:03:01 nova genunix: [ID 179002 kern.notice] %l0-3: 0000030008cec0e8 000002a763904000 000003000430cde8 00000000e5798000
Jan 5 15:03:01 nova %l4-7: 00000300002c9f50 0000000000000000 00000310046cc600 0000030002fe1890
Jan 5 15:03:01 nova genunix: [ID 723222 kern.notice] 000002a10238b540 ufs:ufs_getpage+6b0 (2000, 1, 3000430ce98, 1, 1, 2000)
Jan 5 15:03:02 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000000002000 000003000430cde8 0000000000002000 000003000430cd58
Jan 5 15:03:02 nova %l4-7: 000002a763904000 0000000000000000 000002a10238b750 00000000e5798000
Jan 5 15:03:02 nova genunix: [ID 723222 kern.notice] 000002a10238b680 genunix:segmap_fault+110 (2000, e5798000, 2a763904000, 0, 0, 1)
Jan 5 15:03:02 nova genunix: [ID 179002 kern.notice] %l0-3: 000000001017550c 00000300000cac00 000003000430cde8 00000000e5798000
Jan 5 15:03:02 nova %l4-7: 00000300001b99c0 000002a763904000 00000300001aff88 0000000000000000
Jan 5 15:03:02 nova genunix: [ID 723222 kern.notice] 000002a10238b770 genunix:segmap_getmapflt+42c (2a763904000, 2a763904000, 300008db860, 4600, 10443640, 10443840)
Jan 5 15:03:03 nova genunix: [ID 179002 kern.notice] %l0-3: 00000000e5798000 00000000e57a8000 000003000430cde8 000000006007b1e5
Jan 5 15:03:03 nova %l4-7: 00000000000008c0 00000000018c287c 00000000e5798000 00000300008db860
Jan 5 15:03:03 nova genunix: [ID 723222 kern.notice] 000002a10238b840 ufs:rdip+2ec (e5798000, 0, 3000430cea0, 2a10238bac0, 0, 3000430ce98)
Jan 5 15:03:03 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 0000030003032000 0000000000000001 0000000000000000
Jan 5 15:03:03 nova %l4-7: 000003000430cd58 000002a10238bab0 0000000000002000 000000001041b900
Jan 5 15:03:03 nova genunix: [ID 723222 kern.notice] 000002a10238b930 ufs:ufs_read+ec (30001049d48, 2a10238bab0, 30002fe1890, 3000430cd58, 0, 8)
Jan 5 15:03:04 nova genunix: [ID 179002 kern.notice] %l0-3: 000003000430ce98 0000030008e54000 0000000000000003 000003000830aec0
Jan 5 15:03:04 nova %l4-7: 0000000000000000 0000000093c9459c 0000000097e5abb0 0000000000000000
Jan 5 15:03:04 nova genunix: [ID 723222 kern.notice] 000002a10238b9f0 genunix:pread64+170 (2043, 30007c92820, 195, 3000430cde8, 2000, 2000)
Jan 5 15:03:04 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000010170630 0000000000000000 00000000e5798000 0000000000000000
Jan 5 15:03:04 nova %l4-7: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
Jan 5 15:03:04 nova unix: [ID 100000 kern.notice]
Jan 5 15:03:05 nova genunix: [ID 672855 kern.notice] syncing file systems...
Jan 5 15:03:34 nova unix: [ID 836849 kern.notice]
Jan 5 15:03:34 nova ^Mpanic[cpu0]/thread=3000854d740:
Jan 5 15:03:34 nova unix: [ID 715357 kern.notice] panic sync timeout
Jan 5 15:03:34 nova unix: [ID 100000 kern.notice]
Jan 5 15:03:34 nova genunix: [ID 353387 kern.notice] dumping to /dev/md/dsk/d5, offset 429588480
Jan 5 15:04:17 nova genunix: [ID 409368 kern.notice] ^M100% done: 47759 pages dumped, compression ratio 2.85,
Jan 5 15:04:17 nova genunix: [ID 851671 kern.notice] dump succeeded
Jan 5 15:05:02 nova genunix: [ID 540533 kern.notice] ^MSunOS Release 5.8 Version Generic_117350-15 64-bit
Jan 5 15:05:02 nova genunix: [ID 913632 kern.notice] Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Jan 5 15:05:02 nova genunix: [ID 678236 kern.info] Ethernet address = 0:3:ba:b:7:77
Jan 5 15:05:02 nova unix: [ID 389951 kern.info] mem = 4194304K (0x100000000)
Jan 5 15:05:02 nova unix: [ID 930857 kern.info] avail mem = 4075282432
Jan 5 15:05:02 nova rootnex: [ID 466748 kern.info] root nexus = Sun Fire 880
Jan 5 15:05:02 nova rootnex: [ID 349649 kern.info] pcisch1 at root: SAFARI 0x8 0x600000
Jan 5 15:05:02 nova genunix: [ID 936769 kern.info] pcisch1 is /pci@8,600000
Jan 5 15:05:02 nova qlc: [ID 171021 kern.info] Qlogic FCA Driver v20040825-1.40 (0)
Jan 5 15:05:02 nova rootnex: [ID 349649 kern.info] pcisch0 at root: SAFARI 0x8 0x700000
Jan 5 15:05:02 nova genunix: [ID 936769 kern.info] pcisch0 is /pci@8,700000
Jan 5 15:05:02 nova rootnex: [ID 349649 kern.info] pcisch2 at root: SAFARI 0x9 0x700000
Jan 5 15:05:02 nova genunix: [ID 936769 kern.info] pcisch2 is /pci@9,700000
Jan 5 15:05:02 nova rootnex: [ID 349649 kern.info] pcisch3 at root: SAFARI 0x9 0x600000
Jan 5 15:05:02 nova genunix: [ID 936769 kern.info] pcisch3 is /pci@9,600000
Jan 5 15:05:02 nova qlc: [ID 637753 kern.info] NOTICE: qlc(0): Firmware version 2.1.140
Jan 5 15:05:03 nova qlc: [ID 686697 kern.info] NOTICE: Qlogic qlc(0): Loop OFFLINE
Jan 5 15:05:03 nova pcisch: [ID 370704 kern.info] PCI-device: SUNW,qlc@2, qlc0
Jan 5 15:05:03 nova genunix: [ID 936769 kern.info] qlc0 is /pci@8,600000/SUNW,qlc@2
Jan 5 15:05:03 nova genunix: [ID 936769 kern.info] fp0 is /pci@8,600000/SUNW,qlc@2/fp@0,0
Jan 5 15:05:05 nova qlc: [ID 686697 kern.info] NOTICE: Qlogic qlc(0): Loop ONLINE
Jan 5 15:05:05 nova fctl: [ID 517869 kern.warning] WARNING: 13=>fp(0)::fp_adisc_intr: Perform LOGO.cmd_flags=0, fp_retry_count=5, ulp_pkt=0
Jan 5 15:05:05 nova fctl: [ID 517869 kern.warning] WARNING: 14=>fp(0)::fp_adisc_intr: Perform LOGO.cmd_flags=0, fp_retry_count=5, ulp_pkt=0
Jan 5 15:05:05 nova fctl: [ID 517869 kern.warning] WARNING: 15=>fp(0)::fp_adisc_intr: Perform LOGO.cmd_flags=0, fp_retry_count=5, ulp_pkt=0
Jan 5 15:05:05 nova fctl: [ID 517869 kern.warning] WARNING: 16=>fp(0)::fp_adisc_intr: Perform LOGO.cmd_flags=0, fp_retry_count=5, ulp_pkt=0
Jan 5 15:05:05 nova fctl: [ID 517869 kern.warning] WARNING: 17=>fp(0)::fp_adisc_intr: Perform LOGO.cmd_flags=0, fp_retry_count=5, ulp_pkt=0
Jan 5 15:05:05 nova fctl: [ID 517869 kern.warning] WARNING: 18=>fp(0)::fp_adisc_intr: Perform LOGO.cmd_flags=0, fp_retry_count=5, ulp_pkt=0
Jan 5 15:05:05 nova fctl: [ID 517869 kern.warning] WARNING: 19=>fp(0)::fp_adisc_intr: Perform LOGO.cmd_flags=0, fp_retry_count=5, ulp_pkt=0
Jan 5 15:05:05 nova scsi: [ID 799468 kern.info] ssd0 at fp0: name w21000004cf789d7a,0, bus address ef
Jan 5 15:05:05 nova genunix: [ID 936769 kern.info] ssd0 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf789d7a,0
Jan 5 15:05:05 nova scsi: [ID 365881 kern.info] <SUN36G cyl 24620 alt 2 hd 27 sec 107>
Jan 5 15:05:05 nova genunix: [ID 408114 kern.info] /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf789d7a,0 (ssd0) online
Jan 5 15:05:05 nova scsi: [ID 799468 kern.info] ssd1 at fp0: name w21000004cf78a217,0, bus address e2
Jan 5 15:05:05 nova genunix: [ID 936769 kern.info] ssd1 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a217,0
Jan 5 15:05:05 nova scsi: [ID 365881 kern.info] <SUN36G cyl 24620 alt 2 hd 27 sec 107>
Jan 5 15:05:05 nova genunix: [ID 408114 kern.info] /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a217,0 (ssd1) online
Jan 5 15:05:05 nova scsi: [ID 799468 kern.info] ssd4 at fp0: name w21000004cf78a242,0, bus address e4
Jan 5 15:05:05 nova genunix: [ID 936769 kern.info] ssd4 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a242,0
Jan 5 15:05:05 nova scsi: [ID 365881 kern.info] <SUN36G cyl 24620 alt 2 hd 27 sec 107>
Jan 5 15:05:05 nova genunix: [ID 408114 kern.info] /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a242,0 (ssd4) online
Jan 5 15:05:05 nova scsi: [ID 799468 kern.info] ssd3 at fp0: name w21000004cf78a0a7,0, bus address e0
Jan 5 15:05:05 nova genunix: [ID 936769 kern.info] ssd3 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a0a7,0
Jan 5 15:05:05 nova scsi: [ID 365881 kern.info] <SUN36G cyl 24620 alt 2 hd 27 sec 107>
Jan 5 15:05:05 nova genunix: [ID 408114 kern.info] /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a0a7,0 (ssd3) online
Jan 5 15:05:06 nova scsi: [ID 799468 kern.info] ssd2 at fp0: name w21000004cf78a225,0, bus address e1
Jan 5 15:05:06 nova genunix: [ID 936769 kern.info] ssd2 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a225,0
Jan 5 15:05:06 nova scsi: [ID 365881 kern.info] <SUN36G cyl 24620 alt 2 hd 27 sec 107>
Jan 5 15:05:06 nova genunix: [ID 408114 kern.info] /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a225,0 (ssd2) online
Jan 5 15:05:06 nova scsi: [ID 799468 kern.info] ssd5 at fp0: name w21000004cf78a3c6,0, bus address e8
Jan 5 15:05:06 nova genunix: [ID 936769 kern.info] ssd5 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a3c6,0
Jan 5 15:05:06 nova scsi: [ID 365881 kern.info] <SUN36G cyl 24620 alt 2 hd 27 sec 107>
Jan 5 15:05:06 nova genunix: [ID 408114 kern.info] /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a3c6,0 (ssd5) online
Jan 5 15:05:06 nova scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@2/fp@0,0 (fcp0):
Jan 5 15:05:06 nova ndi_devi_online: failed for scsiclass,0d: target=dc lun=0 ffffffff
Jan 5 15:05:07 nova swapgeneric: [ID 308332 kern.info] root on /pseudo/md@0:0,2,blk fstype ufs
Jan 5 15:05:07 nova scsi: [ID 365881 kern.info] /pci@8,700000/scsi@1 (glm0):
Jan 5 15:05:07 nova Rev. 4 Symbios 53c875 found.
Jan 5 15:05:07 nova pcisch: [ID 370704 kern.info] PCI-device: scsi@1, glm0
Jan 5 15:05:07 nova genunix: [ID 936769 kern.info] glm0 is /pci@8,700000/scsi@1
Jan 5 15:05:07 nova scsi: [ID 365881 kern.info] /pci@8,700000/scsi@3 (glm1):
Jan 5 15:05:07 nova Rev. 5 Symbios 53c875 found.
Jan 5 15:05:07 nova pcisch: [ID 370704 kern.info] PCI-device: scsi@3, glm1
Jan 5 15:05:07 nova genunix: [ID 936769 kern.info] glm1 is /pci@8,700000/scsi@3
Jan 5 15:05:07 nova scsi: [ID 365881 kern.info] /pci@8,700000/scsi@3,1 (glm2):
Jan 5 15:05:07 nova Rev. 5 Symbios 53c875 found.
Jan 5 15:05:07 nova pcisch: [ID 370704 kern.info] PCI-device: scsi@3,1, glm2
Jan 5 15:05:07 nova genunix: [ID 936769 kern.info] glm2 is /pci@8,700000/scsi@3,1
Jan 5 15:05:07 nova scsi: [ID 365881 kern.info] /pci@8,700000/scsi@5 (glm3):
Jan 5 15:05:07 nova Rev. 5 Symbios 53c875 found.
Jan 5 15:05:07 nova pcisch: [ID 370704 kern.info] PCI-device: scsi@5, glm3
Jan 5 15:05:07 nova genunix: [ID 936769 kern.info] glm3 is /pci@8,700000/scsi@5
Jan 5 15:05:07 nova scsi: [ID 365881 kern.info] /pci@8,700000/scsi@5,1 (glm4):
Jan 5 15:05:07 nova Rev. 5 Symbios 53c875 found.
Jan 5 15:05:07 nova pcisch: [ID 370704 kern.info] PCI-device: scsi@5,1, glm4
Jan 5 15:05:07 nova genunix: [ID 936769 kern.info] glm4 is /pci@8,700000/scsi@5,1
Jan 5 15:05:08 nova scsi: [ID 193665 kern.info] sd15 at glm1: target 0 lun 0
Jan 5 15:05:08 nova genunix: [ID 936769 kern.info] sd15 is /pci@8,700000/scsi@3/sd@0,0
Jan 5 15:05:08 nova scsi: [ID 365881 kern.info] <Symbios-StorEDGEA1000-0301 cyl 43084 alt 2 hd 64 sec 64>
Jan 5 15:05:10 nova scsi: [ID 193665 kern.info] sd6 at glm0: target 6 lun 0
Jan 5 15:05:10 nova genunix: [ID 936769 kern.info] sd6 is /pci@8,700000/scsi@1/sd@6,0
Jan 5 15:05:12 nova scsi: [ID 193665 kern.info] sd125 at glm1: target 0 lun 2
Jan 5 15:05:12 nova genunix: [ID 936769 kern.info] sd125 is /pci@8,700000/scsi@3/sd@0,2
Jan 5 15:05:12 nova scsi: [ID 365881 kern.info] <Symbios-StorEDGEA1000-0301 cyl 17232 alt 2 hd 64 sec 64>
Jan 5 15:05:12 nova scsi: [ID 193665 kern.info] sd126 at glm1: target 0 lun 3
Jan 5 15:05:12 nova genunix: [ID 936769 kern.info] sd126 is /pci@8,700000/scsi@3/sd@0,3
Jan 5 15:05:12 nova scsi: [ID 365881 kern.info] <Symbios-StorEDGEA1000-0301 cyl 17232 alt 2 hd 64 sec 64>
Jan 5 15:05:13 nova scsi: [ID 193665 kern.info] rdriver1 at rdnexus2: target 0 lun 0
Jan 5 15:05:13 nova genunix: [ID 936769 kern.info] rdriver1 is /pseudo/rdnexus@2/rdriver@0,0
Jan 5 15:05:13 nova scsi: [ID 193665 kern.info] rdriver3 at rdnexus2: target 0 lun 2
Jan 5 15:05:13 nova genunix: [ID 936769 kern.info] rdriver3 is /pseudo/rdnexus@2/rdriver@0,2
Jan 5 15:05:13 nova scsi: [ID 193665 kern.info] rdriver4 at rdnexus2: target 0 lun 3
Jan 5 15:05:13 nova genunix: [ID 936769 kern.info] rdriver4 is /pseudo/rdnexus@2/rdriver@0,3
Jan 5 15:05:13 nova genunix: [ID 370176 kern.warning] WARNING: forceload of misc/md_trans failed
Jan 5 15:05:13 nova genunix: [ID 370176 kern.warning] WARNING: forceload of misc/md_raid failed
Jan 5 15:05:13 nova genunix: [ID 370176 kern.warning] WARNING: forceload of misc/md_hotspares failed
Jan 5 15:05:14 nova genunix: [ID 370176 kern.warning] WARNING: forceload of misc/md_sp failed
Jan 5 15:05:14 nova pcisch: [ID 370704 kern.info] PCI-device: ebus@1, ebus0
Jan 5 15:05:14 nova platmod: [ID 531893 kern.warning] WARNING: Failed to install "gptwo" driver.
Jan 5 15:05:22 nova ebus: [ID 521012 kern.info] todds12870 at ebus0: offset 1,300070
Jan 5 15:05:22 nova genunix: [ID 936769 kern.info] todds12870 is /pci@9,700000/ebus@1/rtc@1,300070
Jan 5 15:05:22 nova rootnex: [ID 349649 kern.info] mc-us30 at root: SAFARI 0x0 0x400000 ...
Jan 5 15:05:22 nova genunix: [ID 936769 kern.info] mc-us30 is /memory-controller@0,400000
Jan 5 15:05:22 nova rootnex: [ID 349649 kern.info] mc-us31 at root: SAFARI 0x2 0x400000 ...
Jan 5 15:05:22 nova genunix: [ID 936769 kern.info] mc-us31 is /memory-controller@2,400000
Jan 5 15:05:24 nova pcisch: [ID 370704 kern.info] PCI-device: usb@1,3, ohci0
Maybe you are looking for
-
ERROR when Trying to Create Support Message in Satillite system
Hi, I have configured Service Desk in solution manager, when i try to send a Support Message(Help ->Create Support Message) from satillite system to Solution Manager i got this ERROR msg. "Error in local message system; message 000000000001 not compl
-
My MacBook turn out black screen after restart.
When I restart my MacBook Pro it turn out black scene. At first I can see the apple loading screen and after it turn black after load. So I tried to click on the keyboard the cap lock can be turn on/off and the volume still have sound. I tried to hol
-
How to use recursive in Information Design Tools?
Hi all, I want to use recursive for count number of employee in each organization. I write code something like this. with EmpCTE as select RootID = D.ORG_CD , D. ORG_CD, D .ParentOID from (SELECT CURRENT_LEAF as ORG_CD ,
-
hello people, i seem to have a hard time finding a listing of what you can put in the web.xml file. Is this a sun governed thing or can any application server create a layout as to there choosing? as an example i use tomcat for personal use but am tr
-
Unable to update application error
Can't get some apps to update and download. What do I do?