PCD folder in KM content throwing error (WPC Iviews)

Hello KM&C Forum Users,
After following the initial configuration for the WPC in SAP Help I tried using the pcd connection that I had made in the KM content to add an iview to a Web page. I get the following error in the Content window of the KM Content:
System Error
An exception occurred during program execution
Go back and try again
These are the errors from the default trace:
null java.lang.ClassCastException
at com.sap.portal.pcd.km.rm.PcdFolderNode.getChildren(PcdFolderNode.java:82)
and
null java.lang.ClassCastException
at com.sap.portal.pcd.km.rm.PcdFolderNode.getChildren(PcdFolderNode.java:82)
(These are just partial snippets of the logs. If requested I could add the complete log entry)
I have followed the directions in SAP help how this connection is to be made (checked and rechecked) and I also found the instructions of how to do the additional configuration in the wpcDragExplorerEntryPoints. I added the following:
displaymode=select,maxproviderprio=30,entriesperrow=5,sharedcontent=/wpccontent/Cross-Site Content;/pcd/portal_content/Web_Page_iViews
Additionally I checked the Virtual Root Repository and the PCD repository is not excluded.
I also checked and insured that in the PCD repository the Property Search Manager is on "Not set".
I have checked through notes and found note 1450398 and uploaded the patch for my System which is by the way
NW 7.0 SPS 21 stand alone portal
I have also found 2 different notes that mention an "inconsistency between com.sap.tc.pcd.kmsearchadapter.par and the servicepack " but it wasn't mentioned what was done to remove the inconsistency.
As you all can see I have been through notes, Wiki's, Forum entries. SAP Help and SAP notes to no avail. Can anyone out there help me to get rid of this problem?
Thanks in advance
Paul

Hello Raghu,
Thanks for your quick reply. As I mentioned above I have seen these notes but unfortunately I can find no information to the inconsistencies. I am the Portal SAP Basisin this instance and haven't found anything that would help me in this direction. Maybe if you could ask your Basis people what had to be done that would help me considerably
Thanks again
Paul

Similar Messages

Not able to see PCD folder in KM

Hi All,
I have deactivated the Hide in Root foler in Repository Managers u2192 Show Advanced Options u2192 PCD Repository.
Restarted the Server.
But still I'm not able to see the PCD folder in Content Admin --> KM Content.
Is there any other configuration I need to do?
Thanks
Thruna Shanmgua

Hi Rafel,
Thanks for your reply.
I am able to browse the pcd with the url without any issues.
But why I am not able to see the pcd folder in Content Admin --> KM Content.
How do I grant read/write access to the pcd folder?
I want to see the iviews folder in the Web Browser Content in WPC to drag the iview in the web page.
Thanks
Thruna Shanmuga

Dialog box throws error "This content cannot be displayed in a frame"

I have disconnected a SP2010 db and re-connected to a new SP2013 farm. The visual upgrade is not yet done and decided to continue with sp2010 UI for now. In SP2013, I get the following error when I click "Add new item" in a list and "New
user" in a SP Group. Any dialog simply throws error.
This content cannot be displayed in a frame.
To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame.
I have also added "<WebPartPages:AllowFraming runat="server" />" and <meta http-equiv="X-Frame-Options" content="allow">
to the master page but no luck.
Your assistance wil be appreciated.
Thanks

Hi,
This error is generally specific to Internet Explorer and has two possible causes. The most likely explanation is that your browser has unusual browser security settings. I would recommend you try
resetting your security settings to defaults (varies by version but all essentially the same). You may also have to turn off
Protected Mode which is enabled by default on some systems. If you’re seeing this error (or a version of it) outside Internet Explorer, you may have a server-level setting that is preventing your content from being framed.
Reference:https://social.technet.microsoft.com/Forums/exchange/en-US/1460c5a5-6242-4402-9f6b-bc581bf56478/content-cannot-be-displayed-in-a-frame-when-trying-to-add-item?forum=sharepointgeneral
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, it is throwing error "The product distribution file could not be verified. It may be damaged or not signed".

I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
Is there anything I should do differently? Is anyone else facing the same issue?
Kindly help.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

XML Content Upload Error - Failed to Find Handler

Hi
I am trying to upload an xml file using the tools under system administration but when I start the import I get the error cannot find handler. There are no other error messages and the view report features do not work. The handlers xml file property is content.handlers.xml
I have found a few postings on this issue but the only solution I have seen said that you need 2004 s
I am using 2004s
version=7.0.8.0.0
Implementation-Version=7.8.0.0.200606180650
Can anyone help me to identify what is missing?
Many Thanks
Andy Irvine

Hi Martin
I downloaded an xml file containing worksets. The purpose being to mass change the sort priority of a folder within the workset (used as an entry point).
I want to change the sort priority of the folder with id 'mywork' from 100 to 10. As there are many roles (100s rather than 1000s thankfully) I figured this would be the quickest/easiest solution. I used find & replace on a a large section of the my work section and changed only the section shown in the code below to be 10 instead of 100.
[code]
<Attribute name="com.sap.portal.navigation.Priority" type="string">
 <AttributeValue value="10.0"/>
 <Attribute name="administration" type="string">
 <AttributeValue value=""/>
</Attribute>
[/code]
The head of the file is as follows
[code]
GenericCreator author="XML Creator" version="XML Automatic Creation" mode="clean,execute" report.level="success" createMode="3" default.locale="en" ignore="false">
 <Property name="parent1" value="pcd:portal_content/com.burberry.content/Europe"/>
 <Context name="worksets" objectClass="com.sap.portal.pcd.gl.GlContext" create_as="0" parent="$">
 <Attributes>
[/code]
It errors out straight away which is what led me to believe that maybe this was an issue with the portal configuration rather than my xml file. Any suggestions?
Message was edited by:
 Andy Irvine

Mac OS 10.5 / I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!! I do have the OS dvd that i purchased years ago... But my computer will not start from it on its own. My

Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guys

Okay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;)

Dynamic creation of folder in KM content

Hi All,
I've created a webdynpro application which creates a folder in KM Content->Discussion groups dynamically once the application loads.
I've created a iview of this application and users can access this application through the url of the iview
But the issue is that the users are not able to execute this application.I've following queries:
1) Is there any particular role that should be assigned to the user to execute this application
2) If yes, for the above question can we assign the role to the user only when the application is getting executed and then remove it.
I'll be grateful if anybody can help me out in this.
Thanks and Regards,
Pradeep

Thanks for the quick response.
I set the permission for discussiongroups as "read only".
I observed that the users having 'Content Admin' role are able to execute the application and the folder is getting created in KM content.
But the users not having content admin role are not able to execute the application and they get error as "500-Internal Server Error. Failed to process request.Please contact your system administrator"
Can you please clarify on this.Is it anything to do with the role
Reagrds,
Pradeep

** File Content Conversion Error in Receiver CC - How to solve this?

Hi friends,
My target structure looks like below.
EmployeeJobDetails --> Message Type
 JobCode --> Node
 EmployeeNumber xsd:string
 Domain xsd:string
 JobTrack --> Node
 Department xsd: string
 Position xsd: string
I use the FCC parameters in the receiver CC as below:
Recordset Structure: JobCode,JobTrack
JobCode.fieldSeparator = |
JobCode.endSeparator = 'nl'
JobTrack.fieldSeparator = |
JobTrack.endSepartor = 'nl'.
Because, we want the output like below
1099|Raja
Accts|JuniorAccountant
1100|Ram
HR|Recruiter
like this.
In this scenario Source is XML and target is txt file.
I am using XSLT Mapping. The FCC works fine, if my source input file contains some records. But, when we send empty source XML file as below
<?xml version="1.0" encoding="UTF-8"?>
<EMPLOYEE_DATA/>
Mapping works fine. Message is processed successfully in SXMB_MONI. The payload in response also comes with Message Type name like below
<EmployeeJobDetails namespace >
</EmployeeJobDetails>
While convert this, the system throws below error.
Error Message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)'
Friend, how to convert this when source XML is empty.
But, if we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the same empty XML file FCC is working fine and we get the target text file 0 KB. (Amazing !!)
But, in the first case, how to solve the issue?
Kind Regards,
Jegathees P.

Hi friends,
If we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the same empty XML file FCC is working fine and we get the target text file 0 KB. (Amazing !!)
But, if we give parameters like JobCode,JobTrack then send pass the same empty file, we face the problem 'File Content Conversion' Error.
Searching solution for this problem ...

Missing the Adobe PCD folder

I am getting configuration error 16, and the solution is to change permissions on the Adobe PCD folder... however, I don't have that folder.
And before you ask, I also missing the SLStore folder...

I am having the exact same issue and the proposed solution is not helpful to me. This must be a common issue for people so I am shocked that given it has been a year since this question was posted that the tips for dealing with a code 16 on mac os hasn't been updated. I was using photoshop cs5 yesterday on my imac running os mavericks and now I can't access it. Error code 16, I check the adobe folder in app support, no PCD or SLStore folder. I ran the show hidden files function in terminal (yes, I changed the case of the f because I'm in mavericks). Nothing has been changed on the computer since yesterday and yet this has cropped up. I do not want to run it as root nor do I want to make a new user area. I checked the photoshop folder and its permissions were weird - read only for non-admin, so I changed that. It didn't help. There must be a solution to this at this point. I can't contact live support since I'm not on current version, and the only applicable forum post appears to be this one.
Please help this is a massive issue!

How to extract a folder (and its contents) from inside a zip file?

There is a zip file which contains a folder inside it. The folder itself contains a few files. I would need to know how to extract the folder (with its contents) from inside a zip file.
I have found a few unzipping code samples which show how to handle a folder inside a zip file. An example is shown below:
public static void extract(String workingDirectory, byte[] zipFile)
throws Exception {
ByteArrayInputStream byteStream = new ByteArrayInputStream(zipFile);
ByteArrayOutputStream out = new ByteArrayOutputStream();
ZipInputStream zipStream = new ZipInputStream(byteStream);
ZipEntry zipEntry = null;
String nameZipEntry = null;
byte[] contentZiphttp://forum.java.sun.com/post!default.jspa?forumID=31#
Click for code tagsEntry = null;
boolean isDirectory = false;
int indexFileSeparator = -1;
String directory = null;
String fileName = null;
while ( (zipEntry = zipStream.getNextEntry()) != null )
            nameZipEntry = workingDirectory + File.separator + zipEntry.getName();
            isDirectory = zipEntry.isDirectory();
            if (isDirectory) {
File file = new File(nameZipEntry);
file.mkdirs();
            else
                // read zipEntry
                byte[] buf = new byte[1024];
                int c = 0;
                while ( (c = zipStream.read(buf)) != -1)
                    out.write(buf, 0, c);
                indexFileSeparator = nameZipEntry.lastIndexOf(File.separator);
                directory = nameZipEntry.substring(0, indexFileSeparator);
                fileName = nameZipEntry.substring(indexFileSeparator+1,nameZipEntry.length());
                FileSystemTools.createFile(directory, fileName, out);
                out.reset();
                zipStream.closeEntry();
        zipStream.close();
        byteStream.close();
}The code sample which deals with the part where the zipEntry is a directory creates a directory with the same path and name. (highlighted in bold)
Another similar variation is:
File file = new File(dirDestiny.getAbsolutePath() + File.separator + zipEntry.getName() );
if(zipEntry.isDirectory())
      file.mkdirs();When the code creates a directory for the folder, does it unzip the contents inside the folder as well?
If not, how do I extract the files inside the folder?

Have you already tried to see if the sample code you downloaded works or not? Maybe if you try out the code yourself you can see if it extracts files from a directory within a zip file?
I like to use pkzip. It is a command line compression/uncompression tool that can be used from a batch file. If you assignment involves unzipping large amount of zip files on a regular basis, I recommend taking a look at pkzip.

Content Admin Error

Could an expext please give some advise.
Creating a Content Admin Role, basically coping the role from sap provided. When I assign the role to the test user iviews in the PCD blow up.
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.roleEditorButtons
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
any expert advice??

Full Message Text
Exception ID:01:57_06/09/07_0033_755188550
[EXCEPTION]
com.sapportals.portal.prt.runtime.PortalRuntimeException: Access is denied: pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.masseditor - user: Test User, Portal
at com.sapportals.portal.prt.deployment.DeploymentManager.getPropertyContentProvider(DeploymentManager.java:1932)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:234)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:385)
at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:435)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:427)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:358)
at com.sapportals.appdesigner.appdesignerfw.TabContentComponent.doOnNodeReady(TabContentComponent.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.masseditor)
at com.sapportals.portal.pcd.gl.PcdFilterContext.filterLookup(PcdFilterContext.java:422)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1248)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookupLink(PcdProxyContext.java:1353)
at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookup(PcdProxyContext.java:1300)
at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1067)
at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:68)
at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java:238)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at com.sapportals.portal.prt.deployment.DeploymentManager.getPropertyContentProvider(DeploymentManager.java:1919)

PCD folder structure best practices

Hi All,
I'm in de process of modeling the PCD folder structure and would like to get some hints on the best way of doing that.
I've read Managing Big Portals 1 and 2 and some issues made a lot of sense to me.
Some specifics:
-My portal should support three languages, this will specially be the case for KM-related iViews (news, documents)
-The portal has the perspective of growing considerably in the following months/year following a descentralized KM content management model, possibly moving towards descentralized PCD content management
I'm leaning towards the following structure:
KM News
English
Roles
Pages
Worksets
iViews
Portuguese
Spanish
KM Documents
+English
Portuguese
Spanish+
Collaboration
All Languages
External Apps
All Languages....
Administration
All Languages
I still couldn't find a solution I like to the fact that some iViews/Worksets will have the same name for different users..
Any comments? Sugestions?
Thanks in advance!
Günther.

frobnicate.foo wrote:
When the Action has to access some elements in the main frame (e.g. it has to get some data from the currently selected node in the tree), how should this be accomplished? Should I use a static reference of the main frame in my application-class (which holds the main()-method)? Or should I pass in the main frame into the Action while creating the instance?I would pass the main frame to the action(s) that need it. Having a public static member to access your application makes it available to everything in your program, not just the stuff that needs it. In strict OO design, you should shoot for as much data hiding as possible.
And another related question: Is it common to use the same instance of an Action to use it e.g. for a menu bar and for a button?Yes. That is the point of Actions. If you didn't reuse an Action you'd have duplicate code, once for the menu item and again for the button.
What if I wanted to have basically the same Action (i.e. the action being performed is the same) but give it two different labels?Although it's been awhile, I seem to recall that if you call setText() on the button/menu item, it "overrides" the name of the Action. e.g. if you have an Action with its NAME property set to "Action", then this menu item will display "Action":
item = new JMenuItem(action);But this menu item will display "New Text":
item = new JMenuItem(action);
item.setText("New Text");

Content Encoding Error Message re invalid or unsupported form of compression

After installing the last update, when I would attempt to go to various websites, even google, I would get this message on some sites not all. I did not get on IE or chrome.
"Content Encoding Error
The page you are trying to view cannot be shown because it uses an invalid or unsupported form of compression.'
This is what I did.
Open Firefox
1) in the address bar, type: about config 2) promise to be careful 3) type in the filter bar: encoding 4) double click on the value column of network.http.accept-encoding 5) change the 'string value' from "gzip, deflate" to "true" (I had to type that in.) I found that on another string that was closed that the moderator said not to do it or it could mess things up.
I do not know if issue was caused by last update as add or remove programs in control panel does not show Mozilla updates so I could not uninstall last udate. Only other thing I had done was reinstall Real Player Plus with Real downloader and Speed-bit accelerator as I was having trouble downloading flash videos from web pages mainly from Firefox. (Chrome in its wisdom playing god disabled the addon without even asking me so I could not use Chrome for downloads-they said something about not knowing publisher or certificate--"Real Networks"!!! maybe Google-Chrome does not want users of "You Tube which I think it owns to be able to download offf it with competitor or sort of competitor's applications.) I do not know that the Rel Player re-installation had anything to do with the Firefox error message-just contemporaneous in time as was the Firefox update that I only knew about as Firefox let me know I had to restart to finish installation of update.
After ten minutes after making changes re config it seems to be operating OK

After leaving my computer on all night with Chrome and Firefox both open but doing no downloading, etc., I noticed that Wincows Task Manager icon was all green showing 100% CPU usage. I opened Internet Explorer 8 which had been off all night. I looked at Windows Task Manager "processes". It shows firefox.exe with cpu at 86 to 95, iexplore.exe two instances, both at at 00-02, and chrome.exe (2 instances) both at 00. Realpaly.exe also left on all night after burning multiple Cds 6 hours earlier was also at zero. Nothing named speed bit had an active process, but videoacellerator.exe and VideoacceleratorService.exe both of which I allowed to stay in a startup folder were both at 00. Firefox is not downloading videos etc. It has two windows open, one at eBay and one support.mozilla on this issue(content encoding error). This all started occcurring after the latest Firefox update that necessitated the restarting of my computer. I have th two Firefox extensions that like T=Real Downloader allow downloads of flash videos on web pages and neither one was active Flash and Video Download, and Flash Video Downloader the former had been active for several continuous days downloading multiple video clips but had been turned off before I went to bed. After an hour typing this things are still the same with Firefox the CPU hog , still at 84-97, chrome.exe and iexplore.exe still both under 05. For some reason with the recent update tht required restarting the computer Firefox has become a CPU hog and is not working properly withprograms (Windows downloader and Speedbit) and has the content encoding error message issue as wll as sometimes IE not able to go to some pages. My CPU icon in taskbar is teill all green, and can't close firefox without a lot of hassle as that is what I am typing this on.., but I bet that when I do total CPU usage goes to 20 or so and system idle process is the only process with numbers over 80 for CPU.
Has anyone told a webpage manager that there is an encryption problem with their webpage (such as Google or Amazon) as the error message instructs us to do?

Help, some font work on flash.text.engine throw Error #2161

I found some font work on flash.text.engine throw Error #2161
they are: "Vivaldi","Harlow Solid Italic","Bauhaus 93", "Algerian".
the error info is:
Error: Error #2161: 设置文本布局时出现内部错误。
at flash.text.engine::TextBlock/DoCreateTextLine()
at flash.text.engine::TextBlock/createTextLine()
at flashx.tcal.compose::ComposeState/createTextLine()[C:\Development\tcal_core\flashx\tcal\c ompose\ComposeState.as:292]
at flashx.tcal.compose::ComposeState/composeNextLine()[C:\Development\tcal_core\flashx\tcal\ compose\ComposeState.as:207]
at flashx.tcal.compose::BaseCompose/composeParagraphElement()[C:\Development\tcal_core\flash x\tcal\compose\BaseCompose.as:238]
at flashx.tcal.compose::BaseCompose/composeBlockElement()[C:\Development\tcal_core\flashx\tc al\compose\BaseCompose.as:150]
at flashx.tcal.compose::BaseCompose/composeInternal()[C:\Development\tcal_core\flashx\tcal\c ompose\BaseCompose.as:213]
at flashx.tcal.compose::ComposeState/composeInternal()[C:\Development\tcal_core\flashx\tcal\ compose\ComposeState.as:120]
at flashx.tcal.compose::BaseCompose/composeTextFlow()[C:\Development\tcal_core\flashx\tcal\c ompose\BaseCompose.as:194]
at flashx.tcal.compose::ComposeState/composeTextFlow()[C:\Development\tcal_core\flashx\tcal\ compose\ComposeState.as:89]
at flashx.tcal.compose::StandardFlowComposer/http://ns.adobe.com/tcal/internal/2008::callThe Composer()[C:\Development\tcal_core\flashx\tcal\compose\StandardFlowComposer.as:383]
at flashx.tcal.compose::StandardFlowComposer/compose()[C:\Development\tcal_core\flashx\tcal\ compose\StandardFlowComposer.as:434]
at flashx.tcal.factory::TextLineFactory$/factoryMeasure()[C:\Development\tcal_core\flashx\tc al\factory\TextLineFactory.as:267]
at flashx.tcal.factory::TextLineFactory$/createTextLinesFromTextFlow()[C:\Development\tcal_c ore\flashx\tcal\factory\TextLineFactory.as:186]
at mx.graphics.graphicsClasses::TextFlowComposer/composeTextFlow()[E:\dev\trunk\frameworks\p rojects\flex4\src\mx\graphics\graphicsClasses\TextFlowComposer.as:123]
at mx.graphics::TextGraphic/compose()[E:\dev\trunk\frameworks\projects\flex4\src\mx\graphics \TextGraphic.as:511]
at mx.graphics::TextGraphic/measure()[E:\dev\trunk\frameworks\projects\flex4\src\mx\graphics \TextGraphic.as:297]
at mx.graphics.graphicsClasses::GraphicElement/measureSizes()[E:\dev\trunk\frameworks\projec ts\flex4\src\mx\graphics\graphicsClasses\GraphicElement.as:2592]
at mx.graphics.graphicsClasses::GraphicElement/validateSize()[E:\dev\trunk\frameworks\projec ts\flex4\src\mx\graphics\graphicsClasses\GraphicElement.as:2554]
at mx.components::Group/validateSize()[E:\dev\trunk\frameworks\projects\flex4\src\mx\compone nts\Group.as:307]
at mx.managers::LayoutManager/validateClient()[E:\dev\trunk\frameworks\projects\framework\sr c\mx\managers\LayoutManager.as:837]
at mx.controls::List/makeRowsAndColumns()[E:\dev\trunk\frameworks\projects\framework\src\mx\ controls\List.as:1302]
at mx.controls.listClasses::ListBase/makeAdditionalRows()[E:\dev\trunk\frameworks\projects\f ramework\src\mx\controls\listClasses\ListBase.as:3901]
at mx.controls.listClasses::ListBase/updateDisplayList()[E:\dev\trunk\frameworks\projects\fr amework\src\mx\controls\listClasses\ListBase.as:3635]
at mx.controls::List/updateDisplayList()[E:\dev\trunk\frameworks\projects\framework\src\mx\c ontrols\List.as:1004]
at mx.controls.listClasses::ListBase/validateDisplayList()[E:\dev\trunk\frameworks\projects\ framework\src\mx\controls\listClasses\ListBase.as:3273]
at mx.managers::LayoutManager/validateDisplayList()[E:\dev\trunk\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:622]
at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\trunk\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:695]
at Function/http://adobe.com/AS3/2006/builtin::apply()
at mx.core::UIComponent/callLaterDispatcher2()[E:\dev\trunk\frameworks\proje

<div class=Section1> xtaotao,<o:p></o:p> <o:p> </o:p> Can you please file a bug in the bug base at <a href="http://bugs.adobe.com/flex/">http://bugs.adobe.com/flex/</a> and include a simple test case (and/or a list of fonts not working for you) showing the behavior. If you file against “Flex SDK” and the “Gumbo: TextArea” it will end up in my queue and I can investigate and transfer to the appropriate team(s) as needed.<o:p></o:p> <o:p> </o:p> Thanks,<o:p></o:p> <o:p> </o:p> Peter deHaan<o:p></o:p> Flex SDK Team | Adobe Systems Inc.<o:p></o:p> <o:p> </o:p> color:#1F497D'><o:p> </o:p> color:#1F497D'><o:p> </o:p> <div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'> From:<span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> xtaotao [mailto:[email protected]] Sent: Tuesday, November 04, 2008 4:07 AM To: [email protected] Subject: Re: Help, some font work on flash.text.engine throw Error #2161<o:p></o:p> </div> <o:p> </o:p> A new message was posted by xtaotao in Developers -- Help, some font work on flash.text.engine throw Error #2161 and more font work on flash.text.engine do not throw error, but display effect are different with TextField. <o:p></o:p> <div class=MsoNormal> <hr size=2 width=200 style='width:150.0pt' align=left> </div> View/reply at <a href="http://www.adobeforums.com/webx?13@@.59b6ee06/0">Help, some font work on flash.text.engine throw Error #2161</a> Replies by email are OK. Use the <a href="http://www.adobeforums.com/webx?280@@.59b6ee06!folder=.3c060fa3">unsubscribe</a> form to cancel your email subscription.<o:p></o:p> </div>

SharePoint Designer: throwing error while open my sharepoint web applicaiton

When i try to open web application in sharepoint designer. I can't able to open it throw error like this
An Error occured accessing your Microsoft sharepoint foundation site files. Authors - if authoring against a web server, please contact the webmaster for this server's web site. WebMaster - please see the server's application event log for more details

This error occurs if you try to use a reverse proxy to rewrite the response body contents for a SharePoint site as well. We were attempting to inject a Google analytics tracking javascript in the body of all responses. The code never did show up
successfully and this error message resulted as well. We eventually discovered a web solution out on Codeplex that allows you to add the Google analytics tracking script. This article hinted at the root cause:
http://support.microsoft.com/kb/329362/en-us

PCD folder in KM content throwing error (WPC Iviews)

Similar Messages

Maybe you are looking for