(PCI-6014) AI_VRead function returns only -5V~+5V ranges.

After installing the PCI-6014 board, The Mesuremant Automation program work well between -10V~+10V range(Analog Input). But When I ran AIonePoint example, AI_VRead() function returns only -5V ~ +5V. It returns only 5V if I voltage more then 5V. In fact, I want to use this card in range -10V ~ + 10V. What can I do?
Thank you for seeing this.

You need to use a gain of -1.
/* Nothing past this point should fail if the code is working as intended */

Similar Messages

Function return single record

create or replace function etest
(dep in number)
return varchar2
is
dept number:= 0;
cursor c1 is
select deptno
into dept
from emp
where deptno = dep;
begin
open c1;
loop
fetch c1 into dept;
exit when c1%notfound;
end loop;
close c1;
return dept;
end;
Dear all
the above function return only one return ,,,but i want to display all record that belong to department 10
it just i idea that what i want to do....!
and Secondly
how i fetch multiple column like i enter department 10 and it give output like
empno ename sal
7782 CLARK 2450
7739 KING 5000
7934 MILLER 13000
Thanks to all

You could use a REF CURSOR:
PL/SQL 101 : Understanding Ref Cursors
http://www.oracle-base.com/articles/misc/UsingRefCursorsToReturnRecordsets.php
or maybe a pipelined function....
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:19481671347143
http://www.oracle-base.com/articles/9i/PipelinedTableFunctions9i.php
depending on what client is fetching.

Oscilloscope trigger on PCI 6014

Hi...
I tried to build triggered oscilloscope on PCI 6014 for educational purpose. First I build nontriggered Oscope13.vi and it works for me satisfactory. I can change oscillograme with time/sec and volts/sec, and measure values with cursors.
Then I want to trigger that Oscope13.vi with Analog SW Trigger.vi that I found in Cont Acq&Graph Voltage-Analog SW Trigger.vi example as subVi.
I built Oscope14.vi.
Now nothing works as i wanted. Time controls don't change oscillograme and it blinks (some kind of jitter).
Please, can anyone help me to get my nontriggered Oscope13.vi work also in triggered mode.
I work on LabVIEW 8 Full Developement.
Computer: Intel Pentium 4 CPU 2,00 GHz 1 GB RAM
Thanx in advance.
Damir Mileta

Damir,
first of all, the 6014 is a multifunction data acquisition device, not an oscilloscope.
I don't know where you got that example from as it is not following common implementation style guides.
That being said, i see that your DAQmx read returns an array of waveforms. This datatype contains the raw data and timing information. Your conversion of this to a 2D double array removes that timing information. So i assume that your waveform scaling functions runs rampart and messes things up.
Norbert

Error: Partition function can only be created in Enterprise edition of SQL Server

By using the Generate Scripts option in SSMS, I've duplicated this DB seven times so far. I do this due to the 10 Gig limit on Sql Express 2012. I was doing this again today. I generated the script, did a search/replace to provide a new DB name for
DB number eight in the series, and then I ran the script to create the DB, causing the error message. I don't remember seeing this error in the past. It's possible I created the first edition of this DB at home, but back then I only had express edition as
I seem to recall (although I did purchase Developer a few months ago).
I don't even know what the Partition function does. I'll try to look that up tonight.
SSMS did create the DB, I just hope the error message doesn't forebode any problems.
USE [master]
GO
/****** Object: Database [Year2014_Aug_To_Dec] Script Date: 07/29/2014 03:55:19 PM ******/
CREATE DATABASE [Year2014_Aug_To_Dec]
CONTAINMENT = NONE
ON PRIMARY
( NAME = N'Year2014_Aug_To_Dec', FILENAME = N'F:\FlatFilesDatabases\Year2014_Aug_To_Dec.mdf' , SIZE = 8832000KB , MAXSIZE = UNLIMITED, FILEGROWTH = 204800KB )
LOG ON
( NAME = N'Year2014_Aug_To_Dec_Log', FILENAME = N'F:\FlatFilesDatabases\Year2014_Aug_To_Dec_Log.ldf' , SIZE = 230400KB , MAXSIZE = 2048GB , FILEGROWTH = 204800KB )
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET COMPATIBILITY_LEVEL = 110
GO
IF (1 = FULLTEXTSERVICEPROPERTY('IsFullTextInstalled'))
begin
EXEC [Year2014_Aug_To_Dec].[dbo].[sp_fulltext_database] @action = 'enable'
end
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET ANSI_NULL_DEFAULT OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET ANSI_NULLS OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET ANSI_PADDING OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET ANSI_WARNINGS OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET ARITHABORT OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET AUTO_CLOSE ON
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET AUTO_CREATE_STATISTICS ON
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET AUTO_SHRINK OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET AUTO_UPDATE_STATISTICS ON
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET CURSOR_CLOSE_ON_COMMIT OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET CURSOR_DEFAULT GLOBAL
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET CONCAT_NULL_YIELDS_NULL OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET NUMERIC_ROUNDABORT OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET QUOTED_IDENTIFIER OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET RECURSIVE_TRIGGERS OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET DISABLE_BROKER
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET AUTO_UPDATE_STATISTICS_ASYNC OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET DATE_CORRELATION_OPTIMIZATION OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET TRUSTWORTHY OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET ALLOW_SNAPSHOT_ISOLATION OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET PARAMETERIZATION SIMPLE
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET READ_COMMITTED_SNAPSHOT OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET HONOR_BROKER_PRIORITY OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET RECOVERY SIMPLE
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET MULTI_USER
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET PAGE_VERIFY CHECKSUM
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET DB_CHAINING OFF
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET FILESTREAM( NON_TRANSACTED_ACCESS = OFF )
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET TARGET_RECOVERY_TIME = 0 SECONDS
GO
USE [Year2014_Aug_To_Dec]
GO
/****** Object: User [NT SERVICE\MSSQL$SQLEXPRESS] Script Date: 07/29/2014 03:55:20 PM ******/
CREATE USER [NT SERVICE\MSSQL$SQLEXPRESS] FOR LOGIN [NT Service\MSSQL$SQLEXPRESS] WITH DEFAULT_SCHEMA=[NT SERVICE\MSSQL$SQLEXPRESS]
GO
/****** Object: User [NT Authority\Authenticated Users] Script Date: 07/29/2014 03:55:20 PM ******/
CREATE USER [NT Authority\Authenticated Users] FOR LOGIN [NT AUTHORITY\Authenticated Users] WITH DEFAULT_SCHEMA=[NT Authority\Authenticated Users]
GO
/****** Object: User [BUILTIN\USERS] Script Date: 07/29/2014 03:55:20 PM ******/
CREATE USER [BUILTIN\USERS] FOR LOGIN [BUILTIN\Users]
GO
/****** Object: Schema [NT Authority\Authenticated Users] Script Date: 07/29/2014 03:55:21 PM ******/
CREATE SCHEMA [NT Authority\Authenticated Users]
GO
/****** Object: Schema [NT SERVICE\MSSQL$SQLEXPRESS] Script Date: 07/29/2014 03:55:21 PM ******/
CREATE SCHEMA [NT SERVICE\MSSQL$SQLEXPRESS]
GO
/****** Object: FullTextCatalog [Catalog1] Script Date: 07/29/2014 03:55:21 PM ******/
CREATE FULLTEXT CATALOG [Catalog1]WITH ACCENT_SENSITIVITY = ON
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_06A2E7C5] Script Date: 07/29/2014 03:55:21 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_06A2E7C5](varbinary(128)) AS RANGE LEFT FOR VALUES (0x00390039003200380035, 0x006E006E0033003000320034)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_11A1FB2A] Script Date: 07/29/2014 03:55:21 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_11A1FB2A](varbinary(128)) AS RANGE LEFT FOR VALUES (0x006100730073006F006300690061007400650073, 0x006E006E003200320032003700350037003300310030003400300035)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_171D3F63] Script Date: 07/29/2014 03:55:21 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_171D3F63](varbinary(128)) AS RANGE LEFT FOR VALUES (0x00610072006900650078006900650074, 0x006E006E003200390035003200330033003400310030)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_1FA6CD15] Script Date: 07/29/2014 03:55:21 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_1FA6CD15](varbinary(128)) AS RANGE LEFT FOR VALUES (0x0063006F00720070006F0072006100740069006F006E, 0x006E006E0033003500340031003800390031)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_25DC6753] Script Date: 07/29/2014 03:55:21 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_25DC6753](varbinary(128)) AS RANGE LEFT FOR VALUES (0x0061007000700072006F007600650064, 0x006E006E00320033003200380035)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_2B429CF3] Script Date: 07/29/2014 03:55:21 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_2B429CF3](varbinary(128)) AS RANGE LEFT FOR VALUES (0x0069006E006500730068006F006D)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_2D3F28A7] Script Date: 07/29/2014 03:55:22 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_2D3F28A7](varbinary(128)) AS RANGE LEFT FOR VALUES (0x0062006F0078, 0x006E006E003200390034003900320033003000350033)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_32ED1505] Script Date: 07/29/2014 03:55:22 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_32ED1505](varbinary(128)) AS RANGE LEFT FOR VALUES (0x006100690064, 0x006E006E00330036)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_3E6129B6] Script Date: 07/29/2014 03:55:22 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_3E6129B6](varbinary(128)) AS RANGE LEFT FOR VALUES (0x0036003600340038, 0x006C00610074006F0074, 0x006E006E00360031003800380038)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_3FC721DF] Script Date: 07/29/2014 03:55:22 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_3FC721DF](varbinary(128)) AS RANGE LEFT FOR VALUES (0x006300680075006E006B, 0x006E006E0034003300330031006400360031)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_4695B1AD] Script Date: 07/29/2014 03:55:22 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_4695B1AD](varbinary(128)) AS RANGE LEFT FOR VALUES (0x0061006D006F0075006E0074, 0x006E006E003200370064003200330032)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_475E2206] Script Date: 07/29/2014 03:55:23 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_475E2206](varbinary(128)) AS RANGE LEFT FOR VALUES (0x0061007200610079006B)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_52082FB0] Script Date: 07/29/2014 03:55:23 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_52082FB0](varbinary(128)) AS RANGE LEFT FOR VALUES (0x00640065007400610069006C, 0x006E006E003300300038003400320032)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_53473803] Script Date: 07/29/2014 03:55:23 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_53473803](varbinary(128)) AS RANGE LEFT FOR VALUES (0x0061006F00730069, 0x006E006E003200350032003900340031)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_6A54BA8D] Script Date: 07/29/2014 03:55:23 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_6A54BA8D](varbinary(128)) AS RANGE LEFT FOR VALUES (0x00620061006E006B, 0x006E006E003300310064003000370032)
GO
/****** Object: PartitionFunction [ifts_comp_fragment_partition_function_7D7C9D9A] Script Date: 07/29/2014 03:55:23 PM ******/
CREATE PARTITION FUNCTION [ifts_comp_fragment_partition_function_7D7C9D9A](varbinary(128)) AS RANGE LEFT FOR VALUES (0x0063006100720072006900650072, 0x006E006E00330032003700330033)
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_06A2E7C5] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_06A2E7C5] AS PARTITION [ifts_comp_fragment_partition_function_06A2E7C5] TO ([PRIMARY], [PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_11A1FB2A] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_11A1FB2A] AS PARTITION [ifts_comp_fragment_partition_function_11A1FB2A] TO ([PRIMARY], [PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_171D3F63] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_171D3F63] AS PARTITION [ifts_comp_fragment_partition_function_171D3F63] TO ([PRIMARY], [PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_1FA6CD15] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_1FA6CD15] AS PARTITION [ifts_comp_fragment_partition_function_1FA6CD15] TO ([PRIMARY], [PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_25DC6753] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_25DC6753] AS PARTITION [ifts_comp_fragment_partition_function_25DC6753] TO ([PRIMARY], [PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_2B429CF3] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_2B429CF3] AS PARTITION [ifts_comp_fragment_partition_function_2B429CF3] TO ([PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_2D3F28A7] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_2D3F28A7] AS PARTITION [ifts_comp_fragment_partition_function_2D3F28A7] TO ([PRIMARY], [PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_32ED1505] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_32ED1505] AS PARTITION [ifts_comp_fragment_partition_function_32ED1505] TO ([PRIMARY], [PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_3E6129B6] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_3E6129B6] AS PARTITION [ifts_comp_fragment_partition_function_3E6129B6] TO ([PRIMARY], [PRIMARY], [PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_3FC721DF] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_3FC721DF] AS PARTITION [ifts_comp_fragment_partition_function_3FC721DF] TO ([PRIMARY], [PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_4695B1AD] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_4695B1AD] AS PARTITION [ifts_comp_fragment_partition_function_4695B1AD] TO ([PRIMARY], [PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_475E2206] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_475E2206] AS PARTITION [ifts_comp_fragment_partition_function_475E2206] TO ([PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_52082FB0] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_52082FB0] AS PARTITION [ifts_comp_fragment_partition_function_52082FB0] TO ([PRIMARY], [PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_53473803] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_53473803] AS PARTITION [ifts_comp_fragment_partition_function_53473803] TO ([PRIMARY], [PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_6A54BA8D] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_6A54BA8D] AS PARTITION [ifts_comp_fragment_partition_function_6A54BA8D] TO ([PRIMARY], [PRIMARY], [PRIMARY])
GO
/****** Object: PartitionScheme [ifts_comp_fragment_data_space_7D7C9D9A] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE PARTITION SCHEME [ifts_comp_fragment_data_space_7D7C9D9A] AS PARTITION [ifts_comp_fragment_partition_function_7D7C9D9A] TO ([PRIMARY], [PRIMARY], [PRIMARY])
GO
/****** Object: StoredProcedure [dbo].[Files_RecordCountLastThreeDays_ByFolder] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROC [dbo].[Files_RecordCountLastThreeDays_ByFolder]
@ListOfFolders varchar(max)
AS
-- This query pulls only those folders DID have at least one success (a new file added)
With FoldersWithHits AS(
SELECT COUNT(*) AS NUMFILESADDED, Value as Folder
FROM funcSplit('|', @ListOfFolders) As Folders
inner join Files on CHARINDEX(Folders.Value, Files.AGGREGATEPATH) = 1
WHERE DateAdded > DATEADD(DD, -4, GETDATE())
Group By Value
Select * from FoldersWithHits
Union All
-- To get a list of those folders that did NOT have any new files added,
-- resuse the first query - use the above list of successes to do an exclusion
select 0 as NumFilesAdded, Folders.VAlue as Folder
From funcSplit('|', @ListOfFolders) As Folders
Left Join FoldersWithHits on FoldersWithHits.Folder = Folders.Value
Where FoldersWithHits.folder is null
GO
/****** Object: StoredProcedure [dbo].[FILES_SP_FINDTHISMOVEDFILE] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE Proc [dbo].[FILES_SP_FINDTHISMOVEDFILE]
@NameOfFile varchar(2000),
@NameOfZipFile varchar(2000),
@FileSize int
As
-- Here find the zipfile by passing in the name of the zipfile as @NameOfZipFile
Select AggregatePath, 'Found ZipFile By Name' as TypeOfHit From dbo.Files where NameOfFile = @NameOfZipFile
UNION
Select AggregatePath, 'Found ZipFile By Name' as TypeOfHit From dbo.FilesNewLocations where NameOfFile = @NameOfZipFile
UNION
-- Here find the file itself (not just the zipfile) by finding two names: the filename and zipFilename.
Select AggregatePath, 'Found Filename' as TypeOfHit From dbo.FilesNewLocations where Len(NameOfZipFile) > 0 AND NameOfFile = @NameOfFile And NameOfZipFile = @NameOfZipFile
union
Select AggregatePath, 'Found Filename' as TypeOfHit From dbo.FilesNewLocations where Len(NameOfZipFile) > 0 AND NameOfFile = @NameOfFile And NameOfZipFile = @NameOfZipFile
union
-- Here find the file by size
Select AGGREGATEPATH, 'Found By Size' as TypeOfHit From dbo.Files where FileSize = @FileSize ANd NameOfFile = @NameOfFile
UNION
Select AGGREGATEPATH, 'Found By Size' as TypeOfHit From dbo.FilesNewLocations where FileSize = @FileSize ANd NameOfFile = @NameOfFile
Grant Execute ON dbo.Files_SP_FindThisMovedFile To [BuiltIn\Users]
CREATE NONCLUSTERED INDEX idx_FilesNewLocations_CreationDate ON Files (CreationDate)
CREATE NONCLUSTERED INDEX idx_FilesNewLocations_FileSize ON Files (FileSize)
CREATE NONCLUSTERED INDEX idx_FilesNewLocations_NameOfFile ON Files (NameOfFile)
CREATE NONCLUSTERED INDEX idx_FilesNewLocations_NameOfZipFile ON Files (NameOfZipFile)
CREATE NONCLUSTERED INDEX idx_FilesNewLocations_AggregatePath ON Files (AggregatePath)
GO
/****** Object: StoredProcedure [dbo].[FILES_SP_GETEPOCALIPSETEXT] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[FILES_SP_GETEPOCALIPSETEXT]
@AGGREGATEPATH VARCHAR(700)
AS
SET NOCOUNT ON
SELECT F.EPOCALIPSETEXT FROM FILES AS F
WHERE F.AGGREGATEPATH = @AGGREGATEPATH
GO
/****** Object: StoredProcedure [dbo].[FILES_SP_INSERTFILE] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[FILES_SP_INSERTFILE]
@AGGREGATEPATH VARCHAR(4000),
@CREATIONDATE DATETIME,
@EPOCALIPSETEXT VARCHAR(MAX),
@FILEID INT OUTPUT,
@PC VARCHAR(2000),
@FILESIZE INT,
@NAMEOFFILE VARCHAR(2000),
@ZIPPED BIT,
@NAMEOFZIPFILE VARCHAR(2000)
AS
SET NOCOUNT ON
DECLARE @DATEADDED SMALLDATETIME
SELECT @DATEADDED = CONVERT(VARCHAR(12), GETDATE(), 101)
INSERT INTO DBO.FILES (DATEADDED, AGGREGATEPATH, CREATIONDATE,EPOCALIPSETEXT, PC, FILESIZE, NAMEOFFILE, ZIPPED, NAMEOFZIPFILE)
VALUES(@DATEADDED, @AGGREGATEPATH,@CREATIONDATE,@EPOCALIPSETEXT, @PC, @FILESIZE, @NAMEOFFILE, @ZIPPED, @NAMEOFZIPFILE)
SELECT @FILEID=SCOPE_IDENTITY()
GO
/****** Object: StoredProcedure [dbo].[FILES_SP_ISDUPFILE] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[FILES_SP_ISDUPFILE]
@AGGREGATEPATH VARCHAR(2000)
AS
SET NOCOUNT ON
SELECT FILEID FROM DBO.FILES WHERE AGGREGATEPATH= @AGGREGATEPATH
GO
/****** Object: StoredProcedure [dbo].[FILES_SP_RECORDCOUNTLASTSEVENDAYS] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROC [dbo].[FILES_SP_RECORDCOUNTLASTSEVENDAYS]
AS
SELECT PC, COUNT(*) AS NUMFILESADDED, CONVERT(VARCHAR(12),CONVERT(SMALLDATETIME, DATEADDED, 101), 101) AS DATEADDED FROM FILES
WHERE DATEADDED > DATEADD(DD, -9, GETDATE())
GROUP BY PC, CONVERT(SMALLDATETIME, DATEADDED, 101)
ORDER BY PC, CONVERT(SMALLDATETIME, DATEADDED, 101) DESC
GO
/****** Object: StoredProcedure [dbo].[FILESNEWLOCATIONS_SP_INSERTFILE] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[FILESNEWLOCATIONS_SP_INSERTFILE]
@AGGREGATEPATH VARCHAR(4000),
@CREATIONDATE DATETIME,
@FILESIZE INT,
@NAMEOFFILE VARCHAR(2000),
@NAMEOFZIPFILE VARCHAR(2000)
AS
SET NOCOUNT ON
INSERT INTO DBO.FILESNEWLOCATIONS (AGGREGATEPATH, CREATIONDATE,FILESIZE, NAMEOFFILE, NAMEOFZIPFILE)
VALUES(@AGGREGATEPATH,@CREATIONDATE,@FILESIZE, @NAMEOFFILE, @NAMEOFZIPFILE)
GRANT EXECUTE ON DBO.FILESNEWLOCATIONS_SP_INSERTFILE TO [BUILTIN\USERS]
GO
/****** Object: StoredProcedure [dbo].[FILESNEWLOCATIONS_SP_ISDUPNEWLOCATION] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[FILESNEWLOCATIONS_SP_ISDUPNEWLOCATION]
@AGGREGATEPATH VARCHAR(2000)
AS
SET NOCOUNT ON
SELECT COUNT(*) FROM DBO.FILESNEWLOCATIONS WHERE AGGREGATEPATH= @AGGREGATEPATH
GO
/****** Object: StoredProcedure [dbo].[FOLDERS_SP_DELETEALLFOLDERS] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[FOLDERS_SP_DELETEALLFOLDERS]
AS
SET NOCOUNT ON
DELETE FROM FOLDERS
GO
/****** Object: StoredProcedure [dbo].[FOLDERS_SP_INSERTFOLDER] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROC [dbo].[FOLDERS_SP_INSERTFOLDER]
@THEPATH VARCHAR(4000),
@FRIENDLYNAME VARCHAR(4000)
AS
INSERT INTO FOLDERS ([PATH], FRIENDLYNAME) VALUES (@THEPATH, @FRIENDLYNAME)
GO
/****** Object: StoredProcedure [dbo].[MISC_SP_SETDBSTARTDATEANDENDDATE] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[MISC_SP_SETDBSTARTDATEANDENDDATE]
@STARTDATE DATETIME,
@ENDDATE DATETIME
AS
BEGIN
DECLARE @HASDATE TINYINT
SELECT @HASDATE = COUNT(*) FROM MISC WHERE KIND LIKE 'STARTDATE'
IF @HASDATE > 0
BEGIN
UPDATE DBO.MISC
SET DATECOL =
CASE KIND
WHEN 'STARTDATE' THEN @STARTDATE
WHEN 'ENDDATE' THEN @ENDDATE
END
END
ELSE
BEGIN
INSERT INTO DBO.MISC(KIND, DATECOL) VALUES('STARTDATE', @STARTDATE)
INSERT INTO DBO.MISC(KIND, DATECOL) VALUES('ENDDATE', @ENDDATE)
END
END
GO
/****** Object: StoredProcedure [dbo].[PAGES_SP_FINDWORDFORSELECTEDFOLDERS] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[PAGES_SP_FINDWORDFORSELECTEDFOLDERS]
@KEYWORD VARCHAR(500),
@STARTDATE DATETIME,
@ENDDATE DATETIME
AS
SET NOCOUNT ON
SELECT TOP 5000 * FROM
SELECT P.PAGENO AS PGNO,FD.FRIENDLYNAME AS FOLDER, F.CREATIONDATE, 'PAGE' AS [TYPE], F.AGGREGATEPATH AS FULLPATH FROM
CONTAINSTABLE(PAGES, OCRTEXT, @KEYWORD) AS FULLTEXTTABLE
INNER JOIN PAGES AS P ON P.PAGEID = FULLTEXTTABLE.[KEY]
INNER JOIN FILES AS F ON F.FILEID = P.FILEID
INNER JOIN FOLDERS AS FD ON CHARINDEX(FD.PATH + '\', F.AGGREGATEPATH) = 1
WHERE F.CREATIONDATE BETWEEN @STARTDATE AND @ENDDATE
UNION ALL
SELECT NULL AS PGNO, FD.FRIENDLYNAME AS FOLDER, F.CREATIONDATE, 'FILE' AS [TYPE], F.AGGREGATEPATH AS FULLPATH FROM
CONTAINSTABLE(FILES, EPOCALIPSETEXT, @KEYWORD) AS FULLTEXTTABLE
INNER JOIN FILES AS F ON F.FILEID = FULLTEXTTABLE.[KEY]
INNER JOIN FOLDERS AS FD ON CHARINDEX(FD.PATH + '\', F.AGGREGATEPATH) = 1
WHERE F.CREATIONDATE BETWEEN @STARTDATE AND @ENDDATE
) THERESULTS
GO
/****** Object: StoredProcedure [dbo].[PAGES_SP_FINDWORDFORSELECTEDFOLDERS_V2] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[PAGES_SP_FINDWORDFORSELECTEDFOLDERS_V2]
@KEYWORD VARCHAR(500),
@STARTDATE DATETIME,
@ENDDATE DATETIME
AS
SET NOCOUNT ON
SELECT TOP 5000 * FROM
SELECT P.PAGENO AS PGNO,FD.FRIENDLYNAME AS FOLDER, F.CREATIONDATE, 'PAGE' AS [TYPE], F.AGGREGATEPATH AS FULLPATH, F.FILESIZE FROM
CONTAINSTABLE(PAGES, OCRTEXT, @KEYWORD) AS FULLTEXTTABLE
INNER JOIN PAGES AS P ON P.PAGEID = FULLTEXTTABLE.[KEY]
INNER JOIN FILES AS F ON F.FILEID = P.FILEID
INNER JOIN FOLDERS AS FD ON CHARINDEX(FD.PATH + '\', F.AGGREGATEPATH) = 1
WHERE F.CREATIONDATE BETWEEN @STARTDATE AND @ENDDATE
UNION ALL
SELECT NULL AS PGNO, FD.FRIENDLYNAME AS FOLDER, F.CREATIONDATE, 'FILE' AS [TYPE], F.AGGREGATEPATH AS FULLPATH, F.FILESIZE
FROM
CONTAINSTABLE(FILES, EPOCALIPSETEXT, @KEYWORD) AS FULLTEXTTABLE
INNER JOIN FILES AS F ON F.FILEID = FULLTEXTTABLE.[KEY]
INNER JOIN FOLDERS AS FD ON CHARINDEX(FD.PATH + '\', F.AGGREGATEPATH) = 1
WHERE F.CREATIONDATE BETWEEN @STARTDATE AND @ENDDATE
) THERESULTS
GO
/****** Object: StoredProcedure [dbo].[PAGES_SP_GETOCRTEXT] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[PAGES_SP_GETOCRTEXT]
@PAGENO INT,
@AGGREGATEPATH VARCHAR(700)
AS
SET NOCOUNT ON
SELECT P.OCRTEXT FROM PAGES AS P
INNER JOIN FILES AS F ON F.FILEID = P.FILEID
WHERE F.AGGREGATEPATH = @AGGREGATEPATH AND P.PAGENO = @PAGENO
GO
/****** Object: StoredProcedure [dbo].[PAGES_SP_GETOCRTEXTFORALLPAGESOFTHISFILE] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROC [dbo].[PAGES_SP_GETOCRTEXTFORALLPAGESOFTHISFILE]
@AGGREGATEPATH VARCHAR(5000)
AS
SELECT PAGES.OCRTEXT FROM PAGES
INNER JOIN FILES ON FILES.FILEID = PAGES.FILEID
WHERE FILES.AGGREGATEPATH = @AGGREGATEPATH
ORDER BY PAGENO
GO
/****** Object: StoredProcedure [dbo].[PAGES_SP_INSERTPAGE] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[PAGES_SP_INSERTPAGE]
@OCRTEXT VARCHAR(MAX),
@FILEID INT,
@PAGENO INT
AS
SET NOCOUNT ON
INSERT INTO DBO.PAGES (OCRTEXT, FILEID, PAGENO) VALUES (@OCRTEXT, @FILEID, @PAGENO)
GO
/****** Object: StoredProcedure [dbo].[PAGES_SP_ISDUPPAGE] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[PAGES_SP_ISDUPPAGE]
@FILEID INT,
@PAGENO INT
AS
SET NOCOUNT ON
SELECT PAGENO FROM DBO.PAGES WHERE FILEID = @FILEID AND PAGENO = @PAGENO
GO
/****** Object: StoredProcedure [dbo].[usp_RaiseError] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[usp_RaiseError]
@CustomMessage nvarchar(4000) = ' '
AS
-- Exit out if there is no error information to retrieve.
IF ERROR_NUMBER() IS NULL RETURN;
DECLARE
@strErrorMessage NVARCHAR(4000),
@ErrorNumber INT,
@Severity INT,
@ErrorState INT,
@Line INT,
@ProcedureName NVARCHAR(200),
@Msg nvarchar(max);
-- Store all the error info in some temp variables (not sure why he does this)
SELECT -- the SELECT keyword apparently means SET in this case.
@ErrorNumber = ERROR_NUMBER(), -- SETs the value of the @-variable.
@Severity = ERROR_SEVERITY(), -- SETs the value of the @-variable.
@ErrorState = ERROR_STATE(), -- SETs the value of the @-variable.
@Line = ERROR_LINE(), -- SETs the value of the @-variable.
@ProcedureName = ISNULL(ERROR_PROCEDURE(), '-'),
@Msg = Error_Message();
-- Build the message string. The "N" means literal string, and each %d is
-- a standin for a number, and we'll populate these standins later.
SET @strErrorMessage = @CustomMessage + N'Error %d, Severity %d, State %d, Procedure %s, Line %d, '
+ 'Message: '+ @Msg;
RAISERROR (-- This is the built-in RAISEERROR command. Requires 2 vals, then the standin-values
@strErrorMessage, -- You must supply two values before you can populate the standins
@Severity, -- first value, required.
1, -- second value, required
@ErrorNumber, -- populates a standin
@Severity, -- populates a standin
@ErrorState, -- populates a standin
@ProcedureName, -- populates a standin
@Line -- populates a standin
GO
/****** Object: StoredProcedure [dbo].[usp_RebuildIndexes] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE Procedure [dbo].[usp_RebuildIndexes]
AS
Declare @fetch_TableName NVARCHAR(256)
DECLARE Cursor_Tables CURSOR FOR
SELECT Name FROM sysobjects WHERE xtype ='U'
OPEN Cursor_Tables
While 1 = 1 -- Begin to Loop through all tables
BEGIN
FETCH NEXT FROM Cursor_Tables INTO @fetch_TableName -- fetches the next table
if @@FETCH_STATUS <> 0 break
print '---------' + @fetch_TableName
Declare @fetch_indexName NVARCHAR(256) -- loops through al indexes of the current table
DECLARE Cursor_Indexes CURSOR FOR -- Looking for indexes fragmented more than 15 percent.
SELECT name as indexName
FROM sys.dm_db_index_physical_stats (DB_ID(DB_Name()), OBJECT_ID(@fetch_TableName), NULL, NULL, NULL) AS a
JOIN sys.indexes AS b ON a.object_id = b.object_id AND a.index_id = b.index_id
Where Name is not null and avg_fragmentation_in_percent > 7
OPEN Cursor_Indexes
WHILE 1= 1 -- Begin to Loop through all Indexes
BEGIN
FETCH NEXT FROM [Cursor_Indexes] INTO @fetch_indexName
if @@FETCH_STATUS <> 0 break
Declare @SqL nvarchar(2000) = N'
BEGIN TRY
ALTER INDEX ' + @fetch_indexName + ' ON ' + DB_Name() + '.dbo.' + @fetch_TableName + ' Rebuild
END TRY
BEGIN CATCH
Declare @err nvarchar(2000) = ERROR_MESSAGE();
throw 51000, @err, 1
END CATCH'
Execute sp_executeSQL @sql
End -- Ends looping through all indexes
CLOSE [Cursor_Indexes]
DEALLOCATE [Cursor_Indexes]
End -- Ends looping through all tables
CLOSE Cursor_Tables
DEALLOCATE Cursor_Tables
GO
/****** Object: UserDefinedFunction [dbo].[funcSplit] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE function [dbo].[funcSplit](@splitChar varchar(1), @CSV nvarchar(max))
Returns @Results Table (Value nvarchar(max))
As
Begin
Declare @lastChar nvarchar(1) = substring(@CSV, len(@CSV), 1)
-- Make sure the string ends in a comma. If not, append one.
if @lastChar <> @splitChar set @CSV = @CSV + @splitChar
Declare @posOfComma int = 0
Declare @LastPosOfComma int = 0
While 1 = 1
Begin
Set @posOfComma = CHARINDEX(@splitChar ,@CSV, @LastPosOfComma)
if @posOfComma = 0 break
Declare @Length int = @posOfComma - @LastPosOfComma
if @Length > 0
Begin
Declare @Phrase nvarchar(max) = substring(@CSV, @LastPosOfComma, @Length)
Insert Into @Results (Value) VALUES (@Phrase)
end
set @LastPosOfComma = @posOfComma +1
if @LastPosOfComma > Len(@CSV) break
END
Return
End
GO
/****** Object: Table [dbo].[FILES] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[FILES](
[AGGREGATEPATH] [varchar](900) NOT NULL,
[NAMEOFFILE] [varchar](300) NOT NULL,
[NAMEOFZIPFILE] [varchar](300) NOT NULL,
[FILEID] [int] IDENTITY(1,1) NOT NULL,
[CREATIONDATE] [datetime] NOT NULL,
[EPOCALIPSETEXT] [varchar](max) NOT NULL,
[DATEADDED] [datetime] NOT NULL,
[PC] [varchar](30) NOT NULL,
[FILESIZE] [int] NOT NULL,
[ZIPPED] [bit] NOT NULL,
CONSTRAINT [PK_FILES] PRIMARY KEY CLUSTERED
[FILEID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY],
CONSTRAINT [UQ_Files_AggregatePath] UNIQUE NONCLUSTERED
[AGGREGATEPATH] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY],
CONSTRAINT [UQ_Files_FileID] UNIQUE NONCLUSTERED
[FILEID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[FilesNewLocations] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[FilesNewLocations](
[AggregatePath] [varchar](900) NOT NULL,
[NameOfFile] [varchar](300) NOT NULL,
[NameOfZipFile] [varchar](300) NOT NULL,
[LocationID] [int] IDENTITY(1,1) NOT NULL,
[CreationDate] [datetime] NOT NULL,
[Filesize] [int] NOT NULL,
CONSTRAINT [PK_FilesNewLocations] PRIMARY KEY CLUSTERED
[LocationID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY],
CONSTRAINT [UQ_FilesNew_AggregatePath] UNIQUE NONCLUSTERED
[AggregatePath] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[FOLDERS] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[FOLDERS](
[FOLDERID] [int] IDENTITY(1,1) NOT NULL,
[PATH] [varchar](900) NOT NULL,
[FRIENDLYNAME] [nvarchar](500) NULL,
CONSTRAINT [PK_Folders_Path] PRIMARY KEY CLUSTERED
[PATH] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY],
CONSTRAINT [UQ_Folders_FolderID] UNIQUE NONCLUSTERED
[FOLDERID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
/****** Object: Table [dbo].[MISC] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[MISC](
[BOOLEANCOL] [bit] NULL,
[KIND] [nvarchar](4000) NULL,
[STRINGCOL] [nvarchar](4000) NULL,
[DATECOL] [datetime] NULL,
[INTEGERCOL] [int] NULL,
[MISCELLANEOUSID] [int] IDENTITY(1,1) NOT NULL,
CONSTRAINT [idx_Misc_MiscellaneousID] UNIQUE NONCLUSTERED
[MISCELLANEOUSID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[PAGES] Script Date: 07/29/2014 03:55:24 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[PAGES](
[OCRTEXT] [varchar](max) NULL,
[FILEID] [int] NOT NULL,
[PAGENO] [int] NOT NULL,
[PAGEID] [int] IDENTITY(1,1) NOT NULL,
CONSTRAINT [PK_PAGES] PRIMARY KEY CLUSTERED
[PAGEID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY],
CONSTRAINT [UQ_FILEID_PAGENO] UNIQUE NONCLUSTERED
[FILEID] ASC,
[PAGENO] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [idx_Files_AggregatePath] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE NONCLUSTERED INDEX [idx_Files_AggregatePath] ON [dbo].[FILES]
[AGGREGATEPATH] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [idx_Files_CreationDate] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE NONCLUSTERED INDEX [idx_Files_CreationDate] ON [dbo].[FILES]
[CREATIONDATE] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [idx_Files_DateAdded] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE NONCLUSTERED INDEX [idx_Files_DateAdded] ON [dbo].[FILES]
[DATEADDED] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [idx_Files_FileSize] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE NONCLUSTERED INDEX [idx_Files_FileSize] ON [dbo].[FILES]
[FILESIZE] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [idx_Files_NameOfFile] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE NONCLUSTERED INDEX [idx_Files_NameOfFile] ON [dbo].[FILES]
[NAMEOFFILE] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [idx_Files_NameOfZipFile] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE NONCLUSTERED INDEX [idx_Files_NameOfZipFile] ON [dbo].[FILES]
[NAMEOFZIPFILE] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [idx_Files_PC] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE NONCLUSTERED INDEX [idx_Files_PC] ON [dbo].[FILES]
[PC] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [idx_Files_Zipped] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE NONCLUSTERED INDEX [idx_Files_Zipped] ON [dbo].[FILES]
[ZIPPED] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [idx_FilesNewLocations_AggregatePath] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE NONCLUSTERED INDEX [idx_FilesNewLocations_AggregatePath] ON [dbo].[FilesNewLocations]
[AggregatePath] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [idx_FilesNewLocations_CreationDate] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE NONCLUSTERED INDEX [idx_FilesNewLocations_CreationDate] ON [dbo].[FilesNewLocations]
[CreationDate] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [idx_FilesNewLocations_FileSize] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE NONCLUSTERED INDEX [idx_FilesNewLocations_FileSize] ON [dbo].[FilesNewLocations]
[Filesize] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [idx_FilesNewLocations_NameOfFile] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE NONCLUSTERED INDEX [idx_FilesNewLocations_NameOfFile] ON [dbo].[FilesNewLocations]
[NameOfFile] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
SET ANSI_PADDING ON
GO
/****** Object: Index [idx_FilesNewLocations_NameOfZipFile] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE NONCLUSTERED INDEX [idx_FilesNewLocations_NameOfZipFile] ON [dbo].[FilesNewLocations]
[NameOfZipFile] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
/****** Object: Index [idx_Pages_FileID] Script Date: 07/29/2014 03:55:24 PM ******/
CREATE NONCLUSTERED INDEX [idx_Pages_FileID] ON [dbo].[PAGES]
[FILEID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
ALTER TABLE [dbo].[FILES] ADD DEFAULT ('') FOR [NAMEOFZIPFILE]
GO
ALTER TABLE [dbo].[FILES] ADD DEFAULT ('') FOR [EPOCALIPSETEXT]
GO
ALTER TABLE [dbo].[FILES] ADD DEFAULT ((0)) FOR [ZIPPED]
GO
USE [master]
GO
ALTER DATABASE [Year2014_Aug_To_Dec] SET READ_WRITE
GO

8A partition function is used when you partition a table. Partitioned tables is a feature that is available only in Enterprise and Developer Edition.
I went through the script, and there are a number of partition functions and partition schemes, but they are not used anywhere, so you should be able to ignore the error.
Erland Sommarskog, SQL Server MVP, [email protected]

Issue with running PL/SQL function returning Sql query

hi, I am trying to create a report region by using the option of PL/SQL function returning sql query.
I notice that it's very slow for the report region page to show up. In my PL/SQL function body, there are only 3 steps, first update all the 10 rows of varchar2 fields to null,then insert values to those fields, then select all from the table to show report results. It takes more than 5 minitues for the page to load up, how ever, if i run those steps in SQL*Plus, it only takes a couple of seconds to finish. Any suggestions?
Thanks,
gina

Sergio, the codes are as followed,
Declare
q varchar2(32767); -- query
Begin
q := 'select "ID",'||
'"ENTRY NAME","TOTAL","#CM","%CM","#CA",'||
'"%CA", from Info_table';
update info_table
set "TOTAL" = '',
"#CM" = '',
"%CM" = '',
"#CA" ='',
"%CA"=''
where "ID"<=10;
// set all data in column Total to null,there is only 10 rows in the table
update info_Table set Total = vTotal,
"#CM" = vCM
(those variables hold user key-in Text filed value)
where ID = 1;
return q;
End;

Return only one record at a time

I am new to crystal reports so any help would be appreciated. I have a .net app that is a order processing system. When the user is in a record, they want to be able to click on a button an open a crystal report showing only that orders details. I created a crystal report that has the following fields:
Order ID, Product ID, Unit Price, Sell Price, Hours.
The Order ID is the primary key in the database. The report runs fine when clicking the report button in the app, but returns the details for every order in the database. We just need the details of the order that the user is processing. How do I setup the report to only show that order's details? I am using VB 2005 and Crystal v9.
Edited by: sking on Mar 6, 2009 1:12 AM

Brian,
Thank you for all your help. I have been able to setup the report to return only one record at a time. In my app, when I click the report button the PDF opens perfectly with only one record. However, when I go to another record and open the PDF it returns the information from the record id that was set as the default parameter value (crReportDocument.SetParameterValue("Orders", 67). How do I get it to return the report for a different record? Here is the code I'm using. I think I'm really close with your suggestions but I'm just missing one step.
#Region "CrystalReport"
 ''' <summary>
 '''Override the CrystalReportButton_Click and call DisplayReportAsPDF_CrystalReportButton function
 ''' </summary>
 Public Sub CrystalReportButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
 Dim crReportDocument As CrystalDecisions.CrystalReports.Engine.ReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument
 Dim fileName As String = "test.rpt"
 Try
 If fileName.Substring(1).StartsWith(":\") Then
 crReportDocument.Load(fileName)
 Else
 crReportDocument.Load(Me.Page.MapPath(fileName))
 End If
 Catch ex As Exception
 Dim errMsg As String = ex.Message.Replace(Chr(13).ToString(), "").Replace(Chr(10).ToString(), "")
 errMsg += " Please make sure the dlls for Crystal Report are compatible with the Crystal Report file."
 BaseClasses.Utils.MiscUtils.RegisterJScriptAlert(Me, "BUTTON_CLICK_MESSAGE", errMsg)
 End Try
 Try
Dim paramValue As CrystalDecisions.Shared.ParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue()
 paramValue.Value = "67"
 crReportDocument.SetParameterValue("Orders", 67)
DisplayReportAsPDF_CrystalReportButton(crReportDocument)
 Catch ex As Exception
 Dim errMsg As String = ex.Message.Replace(Chr(13).ToString(), "").Replace(Chr(10).ToString(), "")
 errMsg += " If this is a deployment machine, make sure network service has permissions to read or write to the windows\temp folder."
 BaseClasses.Utils.MiscUtils.RegisterJScriptAlert(Me, "BUTTON_CLICK_MESSAGE", errMsg)
 End Try

Function returning error text validation

Hi,
I have a page where i can insert/update user, organisation, responsible.
Organisation can be nullable.
Only one user at a time can be responsible for a organisation.
To check this responsible validation i made a function returning error text validation as follow:
BEGIN
FOR c IN (SELECT usr_spa
FROM kpi_users
WHERE usr_org_id = :p22_usr_org_id
LOOP
IF upper(:p22_usr_spa) = upper('YES') and upper(c.usr_spa) = upper('YES')
THEN
RETURN 'A user is already responsible for this organisation'||'!';
END IF;
END LOOP;
END;
The validation works fine.
But it goes wrong when i want to insert a new user, without assigning him to an organisation.
I get following message:
ORA-01722: invalid number
ERR-1024 Unable to run "function body returning text" validation.
Can someone please help me solve this problem?
Thanks

Hi,
try:
BEGIN
FOR c IN (SELECT usr_spa
FROM kpi_users
WHERE usr_org_id = nvl(:p22_usr_org_id,-1)
LOOP
IF upper(:p22_usr_spa) = upper('YES') and upper(c.usr_spa) = upper('YES')
THEN
RETURN 'A user is already responsible for this organisation'||'!';
END IF;
END LOOP;
END;This assumes that :p22_usr_org_id could be null and converts this to -1 (pick another default value if this may exist as an id). It is possible that the statement would otherwise be seen as WHERE usr_org_id = null which is invalid.
or you could do:
BEGIN
IF :p22_usr_org_id IS NOT NULL THEN
FOR c IN (SELECT usr_spa
FROM kpi_users
WHERE usr_org_id = :p22_usr_org_id
LOOP
IF upper(:p22_usr_spa) = upper('YES') and upper(c.usr_spa) = upper('YES')
THEN
RETURN 'A user is already responsible for this organisation'||'!';
END IF;
END LOOP;
END IF;
END;As this would stop the validation running if the :p22_usr_org_id is null.
Or, you could just make your validation conditional on p22_usr_org_id not being null?
Andy

Why does getdate() function return same time value for multiple select statements executed sequentially

When I run the following code
set nocount on
declare @i table(id int identity(1,1) primary key, sDate datetime)
while((select count(*) from @i)<10000)
begin
insert into @i(sDate) select getdate()
end
select top 5 sDate, count(id) selectCalls
from @i
group by sDate
order by count(id) desc
I get the following results.
sDate selectCalls
2014-07-30 14:50:27.510 406
2014-07-30 14:50:27.527 274
2014-07-30 14:50:27.540 219
2014-07-30 14:50:27.557 195
2014-07-30 14:50:27.573 170
As you can see the select getdate() function returned same time up to the milisecon 406 time for the first date value. This started happening when we moved our applications to a faster server with four processors. Is this correct or am I
going crazy?
Please let me know
Bilal

Observe that adding 2 ms is accurate only with datetime2. As noted above, datetime does not have ms resolution:
set nocount on
declare @d datetime, @i int, @d2 datetime2
select @d = getdate(), @i = 0, @d2 = sysdatetime()
while(@i<10)
begin
select @d2, @d, current_timestamp, getdate(), sysdatetime()
select @d = dateadd(ms,2,@d), @i = @i+1, @d2=dateadd(ms,2,@d2)
end
2014-08-09 08:36:11.1700395 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1720395 2014-08-09 08:36:11.173 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1740395 2014-08-09 08:36:11.177 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1760395 2014-08-09 08:36:11.180 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1780395 2014-08-09 08:36:11.183 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
2014-08-09 08:36:11.1800395 2014-08-09 08:36:11.187 2014-08-09 08:36:11.170 2014-08-09 08:36:11.170 2014-08-09 08:36:11.1700395
DATE/TIME functions:
http://www.sqlusa.com/bestpractices/datetimeconversion/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Returning only records that have no entry in a specific field

Hello,
I'm new to this forum and relatively new to Crystal Reports, so I apologize if this information is "plain as day" somewhere. I've been hunting for this info for quite a while and can't find anything that makes sense!
I am trying to put together a very simple report that will return only records where a certain field is blank.
It is an Access database, in an information management program specific to our type of business. CR 11 software was included with the LIMS (Laboratory Information Management System), as the reports generated from the LIMS software are in CR. I've learned enough to be able to tweak reports and make some basic reports, but I can't find a simple answer to what I think is a simple question!
I have the report set up to access the following fields in the database: Invoice number, Client name, Due date, Invoice amount, and Payment Received. This will be used as a "cross check" - not as any major accounting tool - as the Payment Received field is simply the date that the payment was received. If no payment has been received, the field is left blank.
I want the report to return ONLY those records where that field is blank (i. e. a list of invoices/clients whose payment has not yet been received).
Ideally, I would also like to be able to return only those records where that field is blank OR within a certain date range (i. e. less than 30 days from the date that the report is run). However, we'll probably only use this report a couple of times a month, so that is not as critical.
I know I need to filter the records according to the Payment Received field, but don't know how to construct a formula that says "just show the fields where there is nothing entered."
Thank you!
Brenda

This is the hardest function to find: IsNull
If isNull(field) then
 // if the above fails on a numberic field or text field then see the following two-some databases are picky.
If IsNull(field) or field=0 then //this one maybe needed for a numeric field
If IsNull(field) or field="" // this one maybe needed for a text field
if IsNull(field) or field=<value>
or
if IsNull(field) or field like <value*>
You always want the IsNull statement to be the first statement, and it is especially usefull when testing for not equal
If IsNull(field) or field <> <value>

On Submit process not firing -report (PL/SQL function returning SQL query)

Can anyone suggest possible causes / solutions for the following problem?
I have a report region that uses a PL/SQL function returning SQL query. The report allows the user to update multiple fields / rows and then click a button to submit the page which should run the On-Submit process to update the database. However the process does not run and I get a 'HTTP404 page cannot be found' error; and when I navigate back using the Back button I cannot then navigate to any other page in my application without getting the same error. The button was created by a wizard selecting the options to submit the page and redirect to a (same) page. The button does not actually have a redirect in its definition but the wizard created a branch to the same page which should work and the button has the text 'submit as SUBMIT' next to it so it appears to be set up correctly.
I have recreated this page several times in my application and I cannot get the On-Submit process to run. However I have created a cut down version of the same page in the sample application on apex.oracle.com at http://apex.oracle.com/pls/otn/f?p=4550:1:179951678764332 and this works perfectly so I am at a loss to understand why it does not work in my application. I cannot post any part of the application itself but if anybody would like to check out page 30 of the sample application (Customer Update Test tab) updating the surnames only, using credentials ja, demo, demo this is pretty much what I have got in my application.
Any ideas would be much appreciated?

Thanks for the suggestions guys. I have now identified that the problem goes away when I remove the second table from my report query. The original report query retrieved data from two tables and the process was updating only one of the tables. I thought I had approached the task logically i.e. first get the report to display the records from the two tables, then get the process to update the first table and finally to modify the process further to update the second table.
Can anyone point me to an example of multiple row updates on multiple tables using a PL/SQL function returning an SQL query?

Problem with Function returned without value -

all i am having a problem w/ jdev passing the values. when hardcoded it works. when i remove to pass the 2 vals for doc_type and doc_num the params are being passed to the impl but the String sql = " BEGIN :5 := scotts_test_proc.get_log(:1, :2, :3, :4 ); END; "; is not sending the values to the pkg. to verify i am getting data i created a table to store the data being passed/retrieved by function. i am getting the log_pieces posted when hard coded so i know that works. but when i try to pass the doc_type and doc_num it errors w/ function returend without value . am i passing the params correctly from co to impl to func to get the return l0g_piece. thats for the help
calling package
spec
function Get_Log( -- rmode IN NUMBER , rmode IN STRING, doc_type IN VARCHAR2 DEFAULT 'TEL',
doc_id IN VARCHAR2 DEFAULT NULL , doc_num IN VARCHAR2 DEFAULT NULL
-- , p_out out varchar2
) -- IS --proc
RETURN varchar2 IS --function
body
l_doc_type := 'TEL';- remove this hardcoded
l_doc_type := doc_type ; --to pass the param
IF l_doc_type = 'TEL' THEN
-- l_log_pieces := Get_TEL(TRIM(3524204)); --change 3524204 to doc_num hardcoded presently
l_log_pieces := Get_TEL(TRIM(doc_num)); --to pass the param
-- (doc_num);
l_log_piece := l_log_pieces(1);
-- p_out := l_log_piece ;
insert into isitthere (doc_type, doc_num, isitthere) VALUES (doc_type, doc_num, l_log_piece); commit;
return l_log_piece; -- function -- return p_out; -- function p_out := l_log_piece ; proc
END IF; --if doc type is TEL
FROM CO
System.out.println("CO Passing paramDOC_TYPE for -------> " +docAbbr.getValue(pageContext) ); -- passing TEL
System.out.println("CO Passing paramDOC_NUM for -------> " + paramDOC_NUM ); -- passing 88
String getDocAbbrForHTML = docAbbr.getText(pageContext);
System.out.println("Passing CO getDocAbbrForHTML for -------> " + getDocAbbrForHTML ); -- passing TEL
Serializable paramDocLocatorParamList [] = {paramRMODE, getDocAbbrForHTML , paramDOC_ID, paramDOC_NUM , p_out };
OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean);
OADBTransaction dbtrans;
OAViewObject docLocator = (OAViewObject)am.findViewObject("DocLocatorVO1");
Serializable paramABC = "TELNET";
paramABC = am.invokeMethod("getHTMLString", paramDocLocatorParamList);
rtxt0.setValue(pageContext, "here it is 12354" + paramABC.toString() );
// docLocator.executeQuery();
// --------------- End getHTMLString ----------------- //
FROM AM IMPL
public String getHTMLString ( String paramRMODE, String getDocAbbrForHTML , String paramDOC_ID, String paramDOC_NUM, String p_out )
System.out.println("Entering The AM Impl");
System.out.println("Passing getDocAbbrForHTML in IMPL -------> " +getDocAbbrForHTML ); -- got TEL in param
System.out.println("Passing paramDOC_NUM in IMPL -------> " + paramDOC_NUM ); -- got 88 in param
CallableStatement st = null;
OADBTransaction txn = (OADBTransaction)getDBTransaction();
Connection conn = txn.getJdbcConnection();
String sql = " BEGIN :5 := scotts_test_proc.get_log(:1, :2, :3, :4 ); END; ";
CallableStatement cs = txn.createCallableStatement(sql,1);
String ErrorExist = "";
String getHTML = "";
try
cs.setString(1, paramRMODE); // cs.setInt(1, paramRMODE.intValue()); // cs.setInt(1,Integer.parseInt(paramRMODE));
cs.setString(2, getDocAbbrForHTML); //paramDOC_TYPE);
cs.setString(3, paramDOC_ID);
cs.setString(4, paramDOC_NUM);
// cs.setString(5,p_out); // --param
/* cs.registerOutParameter(1,Types.CHAR);
cs.registerOutParameter(2,Types.CHAR);
cs.registerOutParameter(3,Types.CHAR);
cs.registerOutParameter(4,Types.CHAR);*/
cs.registerOutParameter(5,Types.VARCHAR);
cs.execute();
getHTML = cs.getString(5 ) ;
p_out = getHTML;
//this string is to see my results. only......
String x ="abc 123";/*" TEL Document Action History (3524204 Nosulina, Yelena N COMPLETE) <table border=1 width=100% cellspacing=0 cellpadding=2 bordercolor=#EEEEDC> <tr bgcolor=#F7F7E7>"
+ " <td width=11% valign=top align=left>Action</td> <td width=17% valign=top align=left >Approver UserName</td> <td width=14% valign=top align=left >Date/Time </td> <td width=56% valign=top align=left >Notes</td> "
+" </tr>  <tr bgcolor=#FFFFFF> <td width=11% valign=top align=left > </td> <td width=17% valign=top align=left > </td> <td width=14% valign=top align=left >Dec-20-2011 03:01:23 PM </td> <td width=56% valign=top align=left >DOCUMENT CREATED </td> </tr>  "
+ " <tr bgcolor=#FFFFFF> <td width=11% valign=top align=left > </td> <td width=17% valign=top align=left >McCombs, Tracey L </td> <td width=14% valign=top align=left >Dec-30-2011 01:12:10 PM </td> <td width=56% valign=top align=left >Requestor </td> </tr>  <tr bgcolor=#FFFFFF> "
+" <td width=11% valign=top align=left >WF STARTED </td> <td width=17% valign=top align=left >Workflow </td> <td width=14% valign=top align=left >Dec-30-2011 01:12:21 PM </td> <td width=56% valign=top align=left >Workflow Started </td> </tr>  <tr bgcolor=#FFFFFF> "
+"<td width=11% valign=top align=left > </td> <td width=17% valign=top align=left >McCombs, Tracey L </td> <td width=14% valign=top align=left >Dec-30-2011 01:12:21 PM </td> <td width=56% valign=top align=left >SUBMIT </td> </tr>  <tr bgcolor=#FFFFFF> "
+"<td width=11% valign=top align=left >NOTIFICATION SENT </td> <td width=17% valign=top align=left >Workflow </td> <td width=14% valign=top align=left >Dec-30-2011 01:12:21 PM </td> <td width=56% valign=top align=left >Notification sent to User Approvals Level 1, Org ID: 455 311402400 Med - Infectious Diseases </td> "
+" </tr>  <tr bgcolor=#FFFFFF> <td width=11% valign=top align=left > </td> <td width=17% valign=top align=left >Brownlow, Lana Jill </td> <td width=14% valign=top align=left >Jan-03-2012 08:49:48 AM </td> <td width=56% valign=top align=left >Approved : </td> </tr>  <tr bgcolor=#FFFFFF> "
+" <td width=11% valign=top align=left >USER APPROVED </td> <td width=17% valign=top align=left >Workflow </td> <td width=14% valign=top align=left >Jan-03-2012 08:49:48 AM </td> <td width=56% valign=top align=left >Completed all User Approvals </td> </tr>  <tr bgcolor=#FFFFFF> "
+ " <td width=11% valign=top align=left >CENTRAL APPROVED </td> <td width=17% valign=top align=left > </td> <td width=14% valign=top align=left >Jan-03-2012 08:49:48 AM </td> <td width=56% valign=top align=left >Completed Central Approval Process </td> </tr>  <tr bgcolor=#FFFFFF> "
+" <td width=11% valign=top align=left > </td> <td width=17% valign=top align=left > </td> <td width=14% valign=top align=left >Jan-03-2012 02:17:07 PM </td> <td width=56% valign=top align=left >DOCUMENT REASON CHANGED TO COMPLETE. DATA LOADED IN BASE TABLES. </td> </tr> </table>";
getHTML = x;
System.out.println("getHTML 1234 is " + getHTML ); -- testing output to get returned
cs.close();
catch (SQLException sqle)
try { cs.close(); }
catch (Exception e) {}
throw OAException.wrapperException(sqle);
return getHTML;

when return is encountered your function terminates.

Function returning SQL query for mutiple series in a chart

Hi,
I would like to know if there is a way to specify a single PL/SQL function returning the queries for multiple series in a 2D Line Flash Chart. I have multiple series in my chart that has different values in the where clause. I can write a PL/SQL function that can return all these queries in one shot. Is there anyway that I can specify this function as returning the queries for all the series in the chart?
As an example, assume that I am using the following three queries for the series in my chart:
select deptno, count(*) from emp where deptno = 10 group by deptno
select deptno, count(*) from emp where deptno = 20 group by deptno
select deptno, count(*) from emp where deptno = 30 group by deptno
I can't write a PL/SQL function that returns a query in the multiple series syntax (SELECT link, label, series_1_value [, series_2_value [, ...]]FROM ...) as I am using an aggregate function and my where clause is different for each series.
Thanks,
Rupesh

Hi Roel,
Thanks for your reply. I am already using an analytical function (RATIO_TO_REPORT(COUNT(*)) OVER () ) in my actual report. My problem is that the query for one series differs from the other only in one where clause. I will be able to dynamically able to generate all the queries for all the series in one pl/sql function. But the chart definition screen does not allow us to define a single function that returns queries for the all the series - possibly seperated by some seperator like S1: select.... S2:select and so on.
Regards,
Rupesh

Incremental encoder: reset counter on pci 6014?

I want to connect an incremental encoder with A, B and Z to a PCI 6014 card. I found some VI's for counting A and B (DAQmx->Counter->Count Digital Events; DAQmx->Counter->Measure Posititon) . However I can't figure out what to do with the Z. Is there a way to reset the counters by Z? (I am using labview 2009)
Thank you very much!

Sorry, my fault. I didn't see you have an E-Series device.
Resetting your counter with a digital trigger is possible for Counter/Timer devices but not for your PCI 6014.
You can reset the counter with DAQmx by stopping and starting the task again. You could read your Z index on a digital input, if the input goes high (or low) you could reset the counter.
DAQmx: Count Digital Events with Option to Reset Counter
http://decibel.ni.com/content/docs/DOC-6576
I think this is the only way for the PCI 6014. Since you have to go through several software layers, the performance goes down a bit. If it is possible, i would recommend to change to a M-Series device...
Cheggers
Sascha E.
Group Leader Applications Engineering
National Instruments Switzerland

Using 'Function Returning SQL Query' with Flash charts

I have created a pl/sql function that returns a SQL query as a varchar2 of this form:
select null link
<x value> value
<Series1 y value> Series 1 Label
<Series2 y value> Series 2 Label
<Series3 y value> Series 3 Label
from tablea a
join tableb b
on a.col = b.col
order by <x value>
If I now call the function from a Flash Chart Series SQL box with the Query Source Type set to 'Function Returning SQL Query' like this:
return functionname(to_date('30-sep-2010', 'dd-mon-yyyy'))
it parses correctly and the page is saved; however, when I run the page I don't get any output - nor any error messages or other indication of a problem.
Now, if I call the function in a SQL client, capture the SQL query output using dbms_output and paste that into the Flash Chart Series SQL box - changing the Query Source Type to SQL Query - and save the page it works fine when I run it and returns a multi-series flash chart.
Can anyone suggest either;
1. What have I might have missed or done wrong?
2. Any way to usefully diagnose the problem...
I have tried using the Apex debugger - which is very nice, by the way - but it doesn't provide any info on what my problem might be. I even tried writing my own debug messages from my function using the apex_debug_message package - got nothing...
Thanks,
Eric

Hi Eric,
Try expressing the source as this:
begin
return functionname(to_date('30-sep-2010', 'dd-mon-yyyy'));
end;That works fine for me, and if I take out the begin-end and the trailing semicolon from the return statement I get the same behavior as you.
It does mention in the help for the source (only during the wizard though) that this source type has to be expressed that way, but I agree it would be helpful if the tool would validate for this format when 'Function Returning SQL Query' is used or give some sort of indication of the trouble. Anyway, this should get you going again.
Hope this helps,
John
If you find this information useful, please remember to mark the post "helpful" or "correct" so that others may benefit as well.

PL/SQL function returning a SQL Query

Is this only availabe in HTML db or in 10g in general? Where do I find more about this feature?
Thanks in advance,
Denes

Not sure what you mean. HTML DB allows to use a PL/SQL function returning a valid SQL query in report regions.
Its just a PL/SQL function returning a string, outside of HTML DB, I guess you can use it wherever it makes sense.

(PCI-6014) AI_VRead function returns only -5V~+5V ranges.

Similar Messages

Maybe you are looking for