PCI card

I have a PCI card in my old G4 power mac. When I tried to fit it in my newer mac, which is a powermac g5 - the card doesn't appear to fit. It's a PCI card, but the little notch is in the slot to put it in. Is there any cure? This is a Delta 66 - enabling me to hook up my tape player to my computer and recording voice with music. Is there any help out there? Thanks

HI-
Your machine is a dual 2.5GHz PCI-X model:
http://www.everymac.com/systems/apple/powermacg5/stats/powermac_g5_2.5dp.html
The expansion slots accept PCI or PCI-X cards with either 32-bit or 64-bit address and data buses.
The expansion slots support universal and +3.3 V cards, but not 5 V signalling. The cards are required to use the standard PCI fence described in the specification.
Note: 5 V keyed or signalling cards do not work in the Power Mac G5 computer.
The computer’s case has four openings in the back for access to I/O connectors on cards in the three expansion slots and the AGP slot. Each slot has room for a full size 12.335-inch or short 6.926-inch card. The numbering on the casing is 1 through 4 and corresponds to the label on the PCB. *Number one is the AGP slot* and numbers *two through four are the PCI or PCI-X slots*.
PCI/PCI-X Developers Note
PCI or PCI-X cards cannot be installed in slot #1.
This is reserved for the AGP graphics card only.
M-Audio lists compatibility of the Delta 66 with most G5's, with a couple of exceptions:
http://www.m-audio.com/index.php?do=support.faq&ID=b9f145c1c2ef3fd398ae0c17b1a4c b48
There should be no physical reason for the PCI card to not be installable in slots 2, 3, or 4, unless the PCI card is 5V keyed.

Similar Messages

K9N Platinum SLI - Powering up the PCIe cards

Hey everyone,
I've got a K9N Platinum SLI board. This board has a power supply input point called PWR2, which according to the documentation is used to provide power to stable the operation of graphics cards. My graphic card is BFG nVidia 9750 GT. This card has the PCI-Express external power plug in the back, and my power supply has a dedicated (red) connector for this purpose, which I have attached properly.
The PWR2 is currently connected also, into one of the black 12V connectors. Otherwise, everything is running fine and smooth, but I am sometimes (once a day or so) experiencing random shutdowns during intense gaming (playing LotRO). Stress testing does not cause a shutdown: I've ran 3D Mark 2007 straight for 8-9 hours, while having a CPU Burner application toast the CPU at the same time. But no problems whatsoever. No other games exhibit this problem either.
Since I am providing dedicated power through the extra connector at the back of the card, should I leave the PWR2 connector unplugged ? Is there a chance that using these two connectors at the same time causes the 12V rail to overload, and the PSU shuts down to protect itself ? When this shut down occurs, the power LED is left blinking and I need to plug out the wall socket and wait for several minutes before the blinking stops and it starts up again.
My computer has an Enermax Liberty 620W power supply, and AMD Athlon X2 4600+ CPU. So there should be enough juice, at least. I've tried the tips and tricks suggested here. Using USB-connected Keyboard and Mouse does not correct the issue. I've also verified that this is not an overheating issue. My CPU is cooled by a Scythe Ninja tower heatsink and two 12 cm fans. It is possible that the northbride is heating up (it burns the finger on touch when under load), but from the Web, I've understood that the stock passive heatsink should be enough, and that the NB chip can take rather extreme temperatures.
* UPDATE *
Plugged the PWR2 connector out from the MB, and update the BIOS to 1.10. It's working as usual, but haven't ran any games yet. Heavy gaming usually reproduces the issue, so I'll write more when I know more.

Updated information on the case.
I've been running 2 days now with the PWR2 unplugged. I have had zero problems with shutdowns since. The only problem I now have is that the USB keyboard and mouse refuse to work in Windows XP after an initial bootup from powered down state. I have to unplug and replug them at the login screen in order to get them work again.
So, I decided to do a final sanity check, and replugged the PWR2, then went gaming. After 2 hours of playing, my computer shutted down for the first time. Plugging in the cable did not solve the USB problem either.
As of this day, I'm leaving it unplugged. It seems like an irrelevant connector, which just causes problems.
** Update **
After following Bosskiller's instructions on another thread about using the "Clear CMOS" button and then reconfiguring BIOS from scratch, the cold boot USB issues were solved. The USB devices now work straight after a cold boot, with no need to replug them.
I recommend that the PWR2 -connector info is added to the list of known problems in the sticky thread. If you have a GPU card which takes its power from a dedicated rail (and your PSU has a dedicated connector for this purpose), then leaving the PWR2 -connector unplugged might resolve your shutdown issues, like it solved mine.
After all, according to the manual, this connector is used to give more voltage to the PCI and PCIe busses, and some PCI/PCIe cards might not like this idea at all. There is a reason why these cards have an additional power plug on them...

Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request

Hello Microsoft Community,
I'm trying to install the following:
Product ID: Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card
Name: ORiNOCO Wireless PCI Network Card
Device ID: PCI\VEN_168C&DEV_0013&SUBSYS_0A1014B7, PCI\VEN_168C&DEV_0013&SUBSYS_0A6014B7.
Problem: None of the drivers for Windows 7 X64 has worked to install in devmgmt.msc Please advise where Windows 7 Drivers can be downloaded.
[Please note I've tried the following and had no success: 4.2_JP2_Vista , 4.2_Vista , 4.2_whql , ORiNOCO_v31219 , V2.2.0 software , wpn311_2_0_setup]
I have submitted the following to Proxim Tech Support :
Support Request Submitted: 20284
Thank you! Your support request has been submitted and one of our technical support members will be in touch shortly.
Details
Subject
Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request
Status
New
Severity
Medium
Type
Support Request
Reason
Driver / Software Installation
Request Date
Jan 12, 2015 05:31:26 am PST
Product
Serial Number
Warranty / ServPak
N/A
ServPak Reference
Description
Hello Proxim Tech Support, Product ID: Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Name: ORiNOCO Wireless PCI Network Card Device ID: PCI\VEN_168C&DEV_0013&SUBSYS_0A1014B7, PCI\VEN_168C&DEV_0013&SUBSYS_0A6014B7. Problem:
None of the drivers for Windows 7 X64 has worked to install in devmgmt.msc Please advise where Windows 7 Drivers can be downloaded. Thanks, Kent C.
Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request
Status
New
Severity
Medium
Type
Support Request
Reason
Driver / Software Installation
Request Date
Jan 12, 2015 05:31:26 am PST
Product
Serial Number
Warranty / ServPak
N/A
I will update thread with their reply as nothing, even Driver Genius Professional 11 has located the actual working driver. Once an update is verified, I will post back to this thread since I couldn't find the right answer online.
THIS BTW I TESTED IS INCORRECT [You may verify if you don't believe such] :
http://www.experts-exchange.com/Software/System_Utilities/Q_26292317.html <- That didn't work [Found driver online via Google] and link isn't working anymore in that post.
This is related to this thread here:
https://social.technet.microsoft.com/Forums/windows/en-US/668ac1f0-4560-4bd3-8848-c4fcdc70c10a/wanted-atheros-driver-for-windows-7-x64?forum=w7itprohardware
Any assistance would be appreciated! Thanks..
Kent C.

Hi,
About this issue, you need conatct proxim support to confirm if it could works fine in WIndows 7 platform and how to get the proper driver package.
Karen Hu
TechNet Community Support

IPod touch will not work with USB 2.0 PCI Card?

I have a dual processor PowerMac G4 that has USB 2.0 via a PCI card. When I plug in the iPod nothing at all happens. I haven't read anything about PCI cards not being compatible with the touch. Is anyone else having this problem?

Just thought I'd add my 2 cents...I've got the same problem...I've had a Keyspan USB 2.0 5 port card in my Dual MDD G4 for years and it's worked fine. Well, until a few days ago when I tried updating some stuff on our iPods. It would initially start working then lose connection. Now nothing at all with 5 iPods. It won't even show up on the desktop under Disk Mode. I did the same and it works fine under the old stock USB 1.0 but slooooooowwww. Is this yet another problem with Leopard? I've searched the Keyspan site and they don't have any updated drivers. Guess I'll look for a Belkin as well...ugh!!! Leopard is horrible! First no printer drivers, then no iSub support, now this!

IPod 30GB will not work with 3rd party USB 2.0 PCI card

I've had an IOGear PCI USB 2.0 card (GIC220U-BIO) in my Sawtooth for some time now, and have been using it flawlessly with my Canon i860 printer, and Canon LiDE 30 Scanner.
Just recently I received a Video iPod (30GB) and wanted to take advantage the high speed USB bus offered on that card to sync my iPod. The problem is, when I plug in the iPod to the USB port on that card, I get the transparent gray box telling me that I need to restart my mac by pushing the reset switch, or holding the power button for several seconds (in other words, freezes).
The iPod works fine with the built-in USB ports (albeit slow), as well as the high speed port on my iBook G4. Why am I getting this error? There are no drivers or firmware updates for this PCI card available.
Is there a solution?

Yes, use a different USB 2.0 PCI card, like from Sonnet. I use a Sonnet in a G5 and it works great. There are (at least) 2 USB chipsets and I find the TI ones are great and the other not so great.
The fact it works on 1.1 and the 2.0 on the G4 at least tells you it is not the iPod and a USB 2 card is $20 or $30 at the most.

How to simutaneously use 2 PCI cards, one with traditional DAQ, the other with DAQmx?

Hi,
I am currently trying to debug a system that used to work.. but sadly isnt anymore
A single computer contains 2 PCI cards (6110 & 6036E). The 6110 card is controlled by a fairly old software, programmed in labview, and hence, using Traditional NI-DAQ. The 6036e card is controlled by a more recent soft, programmed in LV as well but using DAQmx.
the AI/AO of the 6110 card is only momentarily used (20 sec consecutively, every minute) while the 6036E card is continuously receiving and sending data on its AI/AO.
Now the problem: the program that control the 6036E card freezes every time that the old prog access the 6110 card.. and then it works again perfectly until the next time that the 6110 card is used.
So my question: how can I make those 2 cards work simultaneously?
I dont think that it is because of the software nor because of the computer lack of memory/CPU if it used to work in the past. It might be about a wrong configuration of cards in the MAX but I couldnt find anything wrong there (no problem when accessing AI/AO of both cards through "test panel")
Thank you very much for you help.

That's what bugs me. The only thing that those 2 cards share is an AO of the 6110 connected to an AI of the 6036.
For the rest, nothing is common. The 1st program only deal with device1, while the 2nd prog only access dev2. There shouldnt be any problem and everything is working fine separately. Hence, why I was wondering if the traditional daq and daqmx might conflict on a same computer.
I just cant find out why the 2nd program controling the daqmx card just freeze everytime the 1st program access the traditional card. It actually doesnt freeze completly but becomes soooo slow, with about only 2 iterations of the main while loop during those 15-20 sec (instead of the normal 3-4000 iterations during such a period).
The computer specs are a 2.2ghz proc for 1G of ram and running XP, so it should be ok.. even though the computer does slow a bit down when the 1st prog access the traditional card.

Can you use regular PCI cards in Mac Pro?

My G5 is getting a bit long in the tooth and I want to buy a Mac Pro. It says that it supports PCI Express cards, but I have several PCI cards in my PowerMac. Since I don't want to buy them all over again, I was wondering if they will work in the Mac Pro?

Hello Hatter,
There is an external solution Now, (Thanks to a Genius named Markus) I have mine running a treat on My Macpro.
http://discussions.apple.com/thread.jspa?messageID=7921458
Cheers
Tom K

Creative WebCam Vista Plus on USB PCI Card (VIA VT 6212) on Windows ME - doesnt work !!

PC turns off when the Vista Plus WebCam is connected to the USB port on my USB PCI Card
I use a primitive Intel Celeron 300Mhz processor with 64MB RAM on an Intel 440BX-AT Chipset running on Window ME. I recently installed a USB PCI Card (based on the VIA VT 622 chipset) which is a 394/USB 2.0 Combo. The problem is my 'Creative WebCam Vista Plus' doesnt work with it.
After I had installed the drivers on the 'Creative WebCam Vista Plus' CD - that is - without connecting the webcam to my USB PCI card the installation asks me to connect the webcam to the USB port and When I do that the PC just GOES OFF !
It starts up only in SAFE MODE and each time I've got to restore my PC.
How do I get the WebCam connected to my PC ?
Thanks in advance
Message Edited by Prabhats on 01-19-2007 08:34 AM

9hours later and Ive given up. I cant get the Vista 64 Ultimate to work with the Audigy 2Nx usb sound card. Im very angry and very frustrated (not to mention very tired from the 2 late nights Ive spent trying to work it out). Im not a PC-noob, but am only 4days into my Vista ownership................... Im guessing now, after much research, that there will never be a driver that gets these units to work with Vista 64bit. thats pretty weak Creative. However, I dont want to use crappy onboard sound for my gaming.What is the suggestion?Should I be looking at returning this unit, and buying either the X-Fi Xtremegamer?Fatality Pro as?a highend device, or the X-Fi Xtremegamer for $00 less? Or should I be looking at another manufacturer. Would either of these x-fi gamers work with Vista 64bit Ultimate?suggestions please?

How to adjust IRQ for PCI card within BIOS - K7T Turbo

Hello,
I have a new Diamond firewire external 160 Gb harddisk.
In spite I have upgraded the BIOS for my K7T Turbo board to version 3.6 (by specs at MSI at least I should use version 3.4 to run 160 Gb HD's), I get I/O errors after trying to copy lot of data to the harddisk. ;( Afterwards I am losing contact to the device and get exclamation marks within the system configuration.
In searching for the errors, it could be the controller of the harddisk itself is not running proper, because I get NO fault by the firewire device within my PC, but just the Diamond controller + harddisk.
To make a last try if I can fix it, I want to give the internal firewire card an own IRQ number. Now with PnP options, many devices are sharing the same IRQ 11.
How can I set a fixed IRQ to the fourth (4e) PCI card within the BIOS?
Looking to the settings it seems I only can manage it when it is an ISA card, but those cards are not used any longer in modern mainboards.
Here are some screendumps of the errors.
1.
No problems after a hard reboot.
http://members.chello.nl/~l.obers/MSI/1_reboot_no_error_a.gif
2. Closer look for the following devices.
The contents of the red boxe within the device system shall disappear after the error.. The blue ones do get exclamation marks
http://members.chello.nl/~l.obers/MSI/2_reboot_no_error_b.gif
3+4. Error messages after a short while when trying to copy many data (above 4 Gb).
http://members.chello.nl/~l.obers/MSI/3_Error_message.gif
http://members.chello.nl/~l.obers/MSI/4_Error_message.gif
5. Errors within the system configuration.
Input 1 do get an exclamation mark first, afterwards input 2
http://members.chello.nl/~l.obers/MSI/5_many_data_error_b.gif
The input of the previuos mentioned red box "general volume" (one is of the Diamond controller), is lost.
Within the file explorer also the harddisk volumes are lost.
6. The log files show a controller error of the disk at IRQ 11
http://members.chello.nl/~l.obers/MSI/6_system_log.gif
Because no errors are found within the 1394 (firewire) device itself, I guess the problem is the Diamond controller of the harddisk.
But before going to the shop, I want to try to give the HD an own IRQ.
Regards, Léon Obers

Mmm. I just see some other options.
The device called "1394 CF type II IEEE 1394 SBP2 device is an extrenal firewire Compact flash reader, not a Diamond controller. (It is connected, during the test, but not used for copying files).
In that case, it could be, that the firewire card itself is the troublesome device. First CF-card reader is lost from connection (exclamation mark), afterwards the Firewire harddisk.
Regards, Léon Obers

Error Code 10 with GPIB PCI Card

PC used: Dell optiplex GX110, lastest Bios release, Windows 2000 SP4, GPIB Drivers version 2.2, Local Admin session.
After having install the driver (without the GPIB)and plug the card, this one is automaticaly recognised by the Os.
But, after the reboot (asked by the OS to validate the installation), the GPIB card appears, in the device manager, with an error code 10 (not started)....
I tried with two (new) differents GPIB PCI Card, two OS (First time with NT4.0 SP6 Drivers 1.7 and now, Win2000 SP4 Drivers 2.2) and with two PCs Dell Optiplex GX110 !
I even tried with a "Ghost" from an other PC (also an Optiplex GX110, with the same model of GPIB Card)
-> I obtain the same error each time !
Help me please..........

Hello,
Could you give me the exact reference of the board (PCI-GPIB, PCI-GPIB+, AT-GPIB, AT/GPIB-TNT...)?
Is the error code displayed on the Windows device manager (in the properties dialog box of the device)?
What is the exact description of the error code?
A PCI-GPIB installation do not need to reboot the OS if the NI-488.2 driver is correctly installed. The board should be recognized in MAX and you must be able to scan for instruments and start I/O communication with the device from test panels in MAX.
Update me as soon as you receive another feedback.
Regards.

Using a PCI card INTERNAL USB port

Hello to anyone reading this !
I've just installed a PCI card in my G5 in order to add more USB ports. When I started searching for one, i was surprised to see most had an internal port, I couldn't really see the use of that. A friend told me it can be used on PCs to plug an extension towards a free port in front of the main unit.
Considering i can't do this on my G5, I was wondering how to take advantage of this internal port and I'd like to know if I can plug my USB Bluetooth adapter, as it doens't need to be visible and it would free one of my external ports. The question is, are there some security restrictions regarding what you put INSIDE the unit? Isn't it too hot inside to leave the bluetooth key or anything else that is not designed to be inside?
Does anyone have any advice?
Thanks in advance
iVince

With all the airflow in a G5, I don't think heat will be a problem, but a Bluetooth unit probably will not be useful inside a shielded metal case. The Apple Bluetooth card connects to an antenna wire that goes outside the shielded section, but I don't think there is any way to connect that wire to the USB Bluetooth module.

Sound Blaster Live 24-bit PCI Sound Card and Creative Sound Blaster PCI Card not detect

Ok here is my problem. I bought a Creative Sound Blaster PCI sound card a while back and it was working fine but recently when I would boot up my computer and try to play music say off of Winamp it says Bad DirectSound Driver. When I check device manager it shows no sound card there and in sounds and audio devices it says no audio device. Now my brother believed this to be a card fault so we went to Frys and bought a Sound Blaster Li've 24-bit PCI card. I uninstalled the old drivers and installed this new one but yet it's the same problem. My assumption was that Windows XP had something conflicting so I reinstalled the OS. It found the card and I installed the latest drivers?off of this site but now it does the same thing yet again with a fresh install of Windows XP. The card has been in all 3 of my PCI slots and it will detect it for a moment but then acts like as if the card was never installed. Like I never installed a sound card into the computer. The onboard audio has been disabled for a while now but I do not know what the problem could be. I did Scan for hardware changes but it doesn't show up. Sometimes when the card is detected if I do scan for hardware changes and the card is there it will just magically disappear from the device manager as if it was never there. Even when I try to load music and I see the card is detected it will not play the music and ends up locking up Winamp to the point that sometimes will go BSOD. Now I would really like to find out what the issue is because I am planning this weekend to swap out my motherboard with a duplicate board to see if that will end up fixing the problem but I want to find out if there is any other way to fix this issue. Thank you.Message Edited by AuXoIs on 02-25-200808:28 PM

Hmm what other options is there for the bios on PCI slots?Also anything you connect to the motherboard can have oxidization (I think its that) build up on the connection. Check the connector on the card and get a eraser (Pen eraser is better) and give it a good cleaning. The connector might have alot of build-up on it and you can see it by a dark yellowy colour. I cleaned my graphics card and ram connectors after they got alot of the build-up on them. On a older computer my graphics stopped working and this fixed it. Also I went away for a while (like a month) and came back to see that my puter didn't display anything. Opened it up and saw that the graphic card had alot of corrosion? on the card connector and in the slot. Does that if you computer is turned of for a long time. Had a heck of time trying to clean the slot out. One other thing that it could be is the sound card is faulty. I had an audigy 2 and it died a while back . It picks it up and then try and use it computer freezes and the after restart it's not there anymore. Hope it's not that problem. Hope this gives you something to go by.

Wmp 11 pci card work with WPA encription?

I just purchased a new 54G wireless access point since my new laptop (with Vista) doesn't seem to want to give "full connectivity" when using WEP security activated.
I now use WPA and the laptop hooks up fine to the new access point. My problem now, is all my other wireless computers have the older wmp 11 pci cards, and I don't see anywhere in the setup where I can select "WPA" security so they can see the new access point.
Is there a way that they can work with this new access point with WPA?

I have a WMP 11 2.7 - I know for a fact it supports WPA2 because I am connected to the net using it and WPA2 right now.
I knew it had to work cos I got it working under Ubuntu linux using this
http://ubuntuforums.org/showthread.php?p=1071920&mode=linear
very helpful guide.
Could not however get the damned thing to work on windows using any of the drivers from this site. So I went back and had a look at the linux guide and found a simple solution. Download this driver
http://sidulus.textdrive.com/bcmwl5sys.zip
Go to C:\windows\system32\drivers\bcmwl5.sys rename the driver there to bcmwl5.old.sys and unzip the new driver to that location. Restart. Hey-presto you should now be able to connect to WPA and WPA2 networks.
I think this will probably only work for the 2.7 version as that is a Broadcom chipset.
You know what really bugs me tho? I shouldn't have to be telling you to do all this, I shouldn't have to do it myself either. Why the hell does this card not connect to WPA with the drivers supplied on this site?!?!?

What is the correct USB 3.0 PCIE card for Z800?

I'm looking to buy the correct USB 3.0 PCIe card for a Z800, but I cant find any thru HP. Any have any info> There's 12 and 60 dollar HP cards on EBAY, but I don't know if those are correct ones.
This question was solved.
View Solution.

Hi,
Based on the following specs, the machine has plenty of options:
http://h18000.www1.hp.com/products/quickspecs/13278_na/13278_na.PDF
You can buy 1-port card, 2-port card, 3-port card or even 4-port card such as:
http://www.startech.com/Cards-Adapters/USB-3.0/Cards/2-Port-PCI-Express-SuperSpeed-USB-3-Card-Adapte...
You need to check the slot to get the right bracket for the card.
Regards.
ps eBay is a different story, you can buy few dollars card.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

USB 2.0 on PCI card no longer supported?

Curious as to whether anyone else has experienced the same problem I had trying to update via a USB 2.0 port on a PCI card. I just updated to 1.1.1 yesterday, and while connected to a USB 2.0 port on my PCI card (my old Mac never had built-in 2.0 ports), all **** broke loose after the download was complete and ready to be installed. I've never had problems syncing via the PCI card's USB 2.0 port up to now, but during the "preparing iPhone for . . ." process, my iPhone would not respond to the installer, resulting in an error message. After repeated attempts, I switched over to a built-in USB 1.1 port and then had to do a complete restore (which took several hours), but was successful. Oddly though, after the restore, if I try to use the USB 2.0 port on the PCI card again to sync, I get an error message saying that the contents of the iPhone cannot be read, and that I'll have to restore again (even though the phone is fully functional). If I switch back to the built-in USB 1.1 port, everything is fine and I'm not asked to restore the phone. Looks like I can no longer use my USB 2.0 ports (on the PCI card), which worked fine prior to 1.1.1. I know that my weeks/months are numbered with this older Mac (doesn't appear that Leopard will be supported on this Mac), but I just wasn't planning to purchase a new Mac just yet. Perhaps Apple is now checking for "built-in" USB 2.0 during these updates and not supporting USB 2.0 via a PCI card? Would sort of make sense, given the number of users who continue to have problems just trying to get iTunes to recognize their phone (i.e., eliminate the 3rd-party PCI cards). I doubt I'll attempt another update to my iPhone with this Mac. Let me know if you've had a similar experience using a PCI card rather than "built-in" USB ports. Thanks.

Thanks everyone for the great info!
I had an issue with my wife's Powermac G4 Sawtooth and went out and got a Belkin USB 2.0 PCI card to replace the less compatible usb 2.0 pci card. It looks a card with the NEC chipset definitely does the trick.
Her iPhone now syncs pretty much perfectly on the Belkin card. Yaaay!
Of course, it doesn't help that there is another syncing issue going on right now, which kind of threw me:
http://discussions.apple.com/thread.jspa?threadID=1311405&tstart=0
But that's temporary. Thanks again!
Message was edited by: John Chu

I have installed succesfully a PCI cards seen by windows but it does not appears in the device and interfaces tools of the Measurement and automation manager?

Cannot install new objects in device and interface to use the ni-imaq library and to take image from my camera.

Which PCI card did you install? The PCI-8252 and PXI-8252 will not appear in MAX. Does your card appear in the Windows Device Manager?

PCI card

Similar Messages

Maybe you are looking for