PCIe-1433 not showing 16bit x 2 taps as option in camera file generator

Trouble getting 16bit by 2 taps camera to display 16 bits. Instead, I get interleved columns of 16bits and 8bits, as if it is only doing 24bit. Camera file generator seems to configure it all correctly, oddly, it uses tap 1 and tap 3 instead of tap 1 and tap 2.
I noticed PCIE-1433 documentation doesn't list 2 taps by 16bit as an option,
http://www.ni.com/pdf/manuals/374001b.pdf
yet NI public information
http://digital.ni.com/public.nsf/allkb/9B89C9FA43A6973A86257A62004658D5
states it can support 2 taps by 16 bit. Chances I need to update IMAQ drivers?

Hi dre99gsx,
This seems like it could be caused by using the wrong camera file. I noticed you said that it's a two tap camera and it's using a different tap configuration than what is intended. Have you tried creating the camera file manually using our Camera File Generator (http://sine.ni.com/nips/cds/view/p/lang/en/nid/14207)?
Julian R.
Applications Engineer
National Instruments

Similar Messages

Camera File Generator Won't Run with MAX + PCIe-1433

Hi,
I am a camera developer and am trying to integrate a couple of new cameralink cameras with the PCIe-1433 NI frame grabber. I have installed NI MAX 14.0 and version 3.0.0 of the Camera File Generator.
I am trying to build a new Camera File for our companies cameras.
The NI MAX shows the NI PCIe-1433 device when it launches.
When I try to launch the Camera File Generator, it failis to load with the following message:
"You must have NI-IMAQ 4.6.0 or higher installed before running the NI Camera File Generator. NI-IMAQ 4.6.0 is installed with Vision Acquisition Software 2011."
The MAX configuration tree shows I have version 14.0 of the NI-IMAQ software available.
Is there any sort of developer's guide for creating a camera file to allow me to use my camera? I need to write some serial commands to the unit and thought tha tthe Camera File Generator would support this....
Thanks.
-Mike

Hi mawillia,
The latest version of the IMAQ drivers is version 4.9, and it would show up where you said, under the Software tab in NI MAX. Do you have this latest version installed? If you like, feel free to expand out your software tab and take a picture of it and post it here.
Also, you are correct that the serial commands can be set in the camera file. Here is a link to our support page for the Camera File Generator: http://sine.ni.com/psp/app/doc/p/id/psp-723/lang/en
Within it is a whole host of various KnowledgeBase articles. This one seems particularly helpful:
What framegrabber specifications do I need to know to create my camera file?: http://digital.ni.com/public.nsf/allkb/9B89C9FA43A6973A86257A62004658D5
Unfortunately, I couldn't find any articles specific to coding the serial commands for your camera in the camera file. But I recommend opening up one of the bundled camera files (I'm looking at the Basler acA2000-340kc (Base).icd ) and within that, click the Camera Control tab. The serial commands for each attribute will show up on the right side, and you can use this as an example for creating yours.
Let me know if you have any further questions!
Julian R.
Applications Engineer
National Instruments

Windows 8.1 - VBS "Pin To Start" not showing in the list as an option

I am having an issue with "Pin to Start" working with vb script.
With the script section below works fine with Windows 8.0 but I msgbox out
the options list with 8.1 and does not show "Pin to Start" as an option although is shows in the GUI
when you right click.
Any ideas ?
Set objShell = CreateObject("Shell.Application")
Set m1Folder = objShell.Namespace(sline(1))
Set m1FolderItem = m1Folder.ParseName(sline(2))
Set colVerbs = m1FolderItem.Verbs
For Each objVerb In colVerbs
If Replace(objVerb.name, "&", "") = "Pin to Start" Then
objVerb.DoIt
End If
Next

Hi,
Since the issue is related to VB script,I suggest you post the question on Script Center forum for further help.
Script Center forum:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home
Also,I suggest you try the following method to check the result.
http://winaero.com/blog/how-to-add-the-pin-to-start-screen-menu-item-to-all-files-in-windows-8/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Note:for security，please backup your registry keys first.
Regards,
Kelvin hsu
TechNet Community Support

How can I Hide(not Disable) the Save As and Exit options in the File menu of Excel Documents in SharePoint 2013?

Hi,
I want to hide(not disable) the "Save As" and "Exit" options in the File Menu of Excel Documents in SharePoint 2013.When I make changes in the excelribbon.css file of xlviewer.aspx,all the options under File menu are getting hidden but
I want to hide only these two options while retaining the others.
Kindly suggest me a method to achieve this.
Looking forward to your reply at the earliest.
Thanks in advance.
Regards,
Sanjana

Hi Sanjana,
To hide the “Save As” and “Exit” options in xlviewer.aspx page in SharePoint, I recommend to use the code below(however it is not recommended):
<style>
div.cui-menusection li.cui-menusection-items:nth-child(2)
display:none !important;
div#m_excelWebRenderer_ewaCtl_menuJewelSaveAs{
display:none !important;
div#m_excelWebRenderer_ewaCtl_msJewelSecondary{
display:none !important;
</style>
As “:nth-child()” selector is supported in IE 9 and later versions, please use IE 9 or later versions’ IE browser.
http://www.w3schools.com/cssref/sel_nth-child.asp
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Excel is not showing multiple Drill thru report selection option

We have created 3 drill thru reports in EIS, excel is not showing Select Drill-Through Report Dialog Box when tying to acess drill thru reports. It defaultly executes the first drill thru report, we want it to list the available reports so that we can select accordingly after view/launch is selected.
essbase 7.1.6 version SQl server 2000

Hi,
This Prompt message would have been set in WAD(XHTML Coding section) in your old project. Now , you cross check your Web template for the same. Your issue will be resolved.
Regards,
Suman

I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.

I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?

I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
I would suggest trying a different firewire cable.
You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
Here is a link.
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
Other things to check:
Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

SAP workload monitor is not showing for particular date in Total Option

Hi,
In t. code ST03N (Work Load Monitor) data is not showing in option total for particular date but it is showing in all the instances.
Please support
Regards
Ganesh Tiwari

Hi Mamtha
Does the same navigation work directly in the backedn? In RSRT?
Pls try that, will halp narrow down your problem. WHether it is a data issue, whetehr it is a BW issue or whether it is a display issue.
Regards
Rajesh

Photos not showing up when I make PDFs from Excel 2007 files

I make lists for my newspaper. I am working from home today where I use Excel 2007 and Adobe Acrobat Pro 9. I had to tweak my home Adobe settings to mimic ones I use at work for our newspaper's printer, but other than that, I am doing what I normally do to my files. At work I have Excel 2003 and Adobe 8. I am not sure if it is pro or standard. I use Windows in both locations.
When I go to make the PDF on my home comp, the photos do not show up on the PDF. They print fine from the Excel file. Does anyone have an idea why this might be happening? Thanks!

A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
LN

Mac does not show UBS as a serial port option for Arduino Uno

Hi,
My Macbook Air with Mavericks will not show a USB connection to Arduino Uno Rev 3. I have tried installing the drivers from: http://www.ftdichip.com/Drivers/VCP.htm but still no luck. Any suggestions appreciated.
Regards,
Alex

I'm running Yosemite on a Late 2011 MacBook Pro...
I've used Arduino IDE 1.0.5 and have recently upgraded to Arduino IDE 1.6.1
I've never had to install special USB drivers.
I simply connect the Arduino UNO R3 to the USB port.
In Terminal, perform the following command
ls -al /dev/tty.usb*
This command will list the USB port for the Arduino, e.g. /dev/tty.usbmodemfa131
Sure enough, this device appears under Arduino -> Tools -> Port
Make sure the Arduino is connected to the USB port.

"mailto" does not show in the applications list undet "options"

I want to set gmail as my default email program in Firefox. When I go to Tools>options>applications, the "mailto" application option does not show in the list. How do I find this?

Try to delete the mimeTypes.rdf file in the Firefox Profile Folder to reset all file actions.
*http://kb.mozillazine.org/mimeTypes.rdf
*http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions
You can look at the network.protocol-handler.external.mailto prefs on the about:config page.<br />
If network.protocol-handler.external.mailto prefs are user set (bold) then right-click and Reset them to the default value.
*http://kb.mozillazine.org/about:config

Calendar not showing multiple days when using Gmail option

Since I installed Mountain Lion the calendar when using the Gmail option does not show the bar (highlight ) when using multiple days. The detail transfer to My I pad perfectly and the Apple work & home are also working. If I click on the first day of an event then it is highlighted.

Automatic update from Apple, resolved problem.

Airport drive not showing up as one of the options when installing new programs

I purchased a large 120GB soundbank (Komplete 9 from Native Instruments) and need to install it to my MacBook Air which does not have enough space on the internal drive.
I have a 2TB Airport capsule and thought I would be able to install the program on there but it does not show up as an available option when I try to install the program (see screenshot). Do I need to buy an external drive that plugs in via USB instead? I'm hoping I don't need a MacBook Pro instead...
Thanks a lot.

Programs usually aren't the biggest culprits in terms of space usage, it's normally data files that take up more space. This kind of huge library really is best installed on an external drive, provided you don't mind carrying it around with you. Here's how you install it on an external:
http://www.native-instruments.com/en/support/knowledge-base/show/1072/how-to-ins tall-the-komplete-9-content-on-an-external-hard-drive-mac/
Matt

PCI-GPIB not showing in MAX or correctly in Device Manager.

I am having an issue with the PCI-GBIP working correctly for our setup. I have removed NI 488.2, and all associated software from the computer and have done new installs of NI 488.2 v1.7 and GPIB software.
Configuration for the software allows me to choose the board type, and configure the board.
When I test the board using diagnostics, I get the board as passed.
When I open device manager, it sees the board as PCI Simple Communications Controller. MAX Does not read the card at all.
I am using this to control an ICP-OES using WinLab32, and can get a connection, but am getting a Status Command Failed when attempting to light the plasma. There is communication, but I don't believe that it is all there.
I have tried reinstalling multiple times, but to no avail. There is no NI-VISA on the computer, but I didn't uninstall this either. I attempted to install NI-VISA 4.2 and it stopped communicating entirely.
Any help is greatly appreciated as I am stumped.

Hi Joplrw10,
Which PCI-GPIB card are you using? What OS? It sounds like you may have a driver issue. I would recommend uninstalling all the driver and reinstall according to the below links.
Installing PCI/PCIe-GPIB Controllers
http://www.ni.com/getting-started/set-up-hardware/instrument-control/pci-gpib
Instrument Control in Windows with GPIB: Set-up and Configuration
http://www.ni.com/webcast/1433/en/
Thanks,
Frank
Application Engineer
National Instruments

Bookmarks not showing when bookmark icon tapped

Hi, I have created an ePub and am seeing a problem with it when trying to add a bookmark. Sometimes tapping the bookmark icon in the top right of the book will result in the red bookmark ribbon appearing, but then on other occasions, however much I tap the bookmark icon - the bookmark just doesn't appear.
I have found that this does also happen on other ePubs, so I am wondering if this might be a known iBooks bug.

Hi Tim...
Try troubleshooting the Safari .plist (preferences can become corrupted)
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Preferences/com.apple.Safari.plist
Click Go
Move the com.apple.Safari.plist file to the Desktop.
Quit and relaunch Safari.
Try adding a new bookmark of bookmark folder. If you can, then move the .plist file to the Trash. If not, move it back to the Preferences folder.
If that didn't help, open System Preferences > iCloud
Deselect the box next to Bookmarks, then reselect it.
Quit and relaunch Safari. Try a bookmark again.
edited by: cs

Not showing Finder Window / Contact Taps in Yosemite

Retina Macbook Pro (13 inch) installed OS X Yosemite.
When opening the Finder Window no content been shown. Same with the Contact App not contact windows been shown. How to solve the Bug? All is OK on the other (Desc Top) computers. - Cheers, Georg

I solved the problem...
This issue was only seen on a Secondary User of this Machine.
A couple weeks ago I wanted to place some files in this Users folders so I gave the Primary User Read & Write Privileges.
I removed these privileges and the problem went away - I was able topull up the finder window and attach files (thsi als osolved another issue I had with Safari https://discussions.apple.com/message/19175220#19175220)
My lesson learned is to use the Shared folder.
Thanks
Jeff

PCIe-1433 not showing 16bit x 2 taps as option in camera file generator

Similar Messages

Maybe you are looking for