PCs not assigned to group on WSUS

Hi,
I have configured WSUS server and set client-side targeting.
I created Computer group X on WSUS.
I created Group policy and link to OU in AD. I put pc inside this OU.
Group policy sets WSUS server and enables client-side targeting to this specific group X.
I checked Resultant Set of Policy on this PC and it's correctly set.
The problem is that I don't see computer inside group X on WSUS.
I see the PC in Unassigned Computers, but not in group X.
What could be the problem ?
Thank you..

Here is log, somewhere I put ... instead of real data to protect privacy.
2014-09-24 19:18:06:390 740 818 Misc =========== Logging initialized (build: 7.9.9600.16403, tz: +0200) ===========
2014-09-24 19:18:06:409 740 818 Misc   = Process: C:\Windows\system32\svchost.exe
2014-09-24 19:18:06:409 740 818 Misc   = Module: c:\windows\system32\wuaueng.dll
2014-09-24 19:18:06:380 740 818 Service *************
2014-09-24 19:18:06:409 740 818 Service ** START ** Service: Service startup
2014-09-24 19:18:06:409 740 818 Service *********
2014-09-24 19:18:06:639 740 818 Agent   * WU client version 7.9.9600.16403
2014-09-24 19:18:06:639 740 818 Agent   * Base directory: C:\Windows\SoftwareDistribution
2014-09-24 19:18:06:639 740 818 Agent   * Access type: No proxy
2014-09-24 19:18:06:640 740 818 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-09-24 19:18:06:640 740 818 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-09-24 19:18:06:640 740 818 Agent   * Network state: Connected
2014-09-24 19:18:06:728 740 818 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-09-24 19:18:06:728 740 818 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-09-24 19:18:07:402 740 818 Agent *********** Agent: Initializing global settings cache ***********
2014-09-24 19:18:07:402 740 818 Agent   * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-09-24 19:18:07:402 740 818 Agent   * WSUS server:
http://wsusserver:8530
2014-09-24 19:18:07:402 740 818 Agent   * WSUS status server:
http://wsusserver:8530
2014-09-24 19:18:07:402 740 818 Agent   * Target group: Server-group
2014-09-24 19:18:07:403 740 818 Agent   * Windows Update access disabled: No
2014-09-24 19:18:07:494 740 818 Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2014-09-24 19:18:07:607 740 818 WuTask WuTaskManager delay initialize completed successfully..
2014-09-24 19:18:07:942 740 818 Report CWERReporter::Init succeeded
2014-09-24 19:18:07:942 740 818 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-09-24 19:18:07:946 740 818 DnldMgr Download manager restoring 0 downloads
2014-09-24 19:18:07:962 740 818 AU ########### AU: Initializing Automatic Updates ###########
2014-09-24 19:18:08:002 740 818 AU AIR Mode is disabled
2014-09-24 19:18:08:003 740 818 AU   # Policy Driven Provider:
http://wsusserver:8530
2014-09-24 19:18:08:008 740 818 AU   # Detection frequency: 22
2014-09-24 19:18:08:008 740 818 AU   # Target group: Server-group
2014-09-24 19:18:08:009 740 818 AU   # Approval type: Scheduled (Policy)
2014-09-24 19:18:08:009 740 818 AU   # Auto-install minor updates: Yes (User preference)
2014-09-24 19:18:08:009 740 818 AU   # Will interact with non-admins (Non-admins are elevated (User preference))
2014-09-24 19:18:08:025 740 818 AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2014-09-24 19:18:08:025 740 818 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-09-24 19:18:08:078 740 818 AU AU finished delayed initialization
2014-09-24 19:18:08:078 740 818 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-09-24 19:18:08:149 740 818 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-09-24 19:18:08:155 740 950 DnldMgr Asking handlers to reconcile their sandboxes
2014-09-24 19:22:56:767 740 818 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-09-24 19:22:56:768 740 818 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-09-24 19:22:59:693 740 818 AU ReAttemptDownloadsAsUserIfNecessary, No calls in download progress.
2014-09-24 19:22:59:695 740 818 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-09-24 19:22:59:696 740 818 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-09-24 19:24:50:560 740 3d0 AU Triggering AU detection through DetectNow API
2014-09-24 19:24:50:567 740 3d0 AU Triggering Online detection (non-interactive)
2014-09-24 19:24:50:593 740 818 AU #############
2014-09-24 19:24:50:593 740 818 AU ## START ## AU: Search for updates
2014-09-24 19:24:50:593 740 818 AU #########
2014-09-24 19:24:50:603 740 818 IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 18; does use network; is not at background priority
2014-09-24 19:24:50:603 740 818 IdleTmr Incremented PDC RefCount for Network to 1
2014-09-24 19:24:50:603 740 818 IdleTmr Incremented idle timer priority operation counter to 1
2014-09-24 19:24:50:766 740 818 Report *********** Report: Initializing static reporting data ***********
2014-09-24 19:24:50:766 740 818 Report   * OS Version = 6.3.9600.0.0.196880
2014-09-24 19:24:50:766 740 818 Report   * OS Product Type = 0x00000007
2014-09-24 19:24:50:771 740 818 Report   * Computer Brand = ...
2014-09-24 19:24:50:771 740 818 Report   * Computer Model = ...
2014-09-24 19:24:50:771 740 818 Report   * Platform Role = 1
2014-09-24 19:24:50:771 740 818 Report   * AlwaysOn/AlwaysConnected (AOAC) = 0
2014-09-24 19:24:50:773 740 818 Report   * Bios Revision = ...
2014-09-24 19:24:50:773 740 818 Report   * Bios Name = ...
2014-09-24 19:24:50:773 740 818 Report   * Bios Release Date = ...
2014-09-24 19:24:50:773 740 818 Report   * Bios Sku Number unavailable.
2014-09-24 19:24:50:773 740 818 Report   * Bios Vendor = ...
2014-09-24 19:24:50:773 740 818 Report   * Bios Family unavailable.
2014-09-24 19:24:50:773 740 818 Report   * Bios Major Release = ...
2014-09-24 19:24:50:773 740 818 Report   * Bios Minor Release = ...
2014-09-24 19:24:50:773 740 818 Report   * Locale ID = 1033
2014-09-24 19:24:50:822 740 818 Agent *** START *** Queueing Finding updates [CallerId = Windows Update Command Line Id = 1]
2014-09-24 19:24:50:822 740 818 AU <<## SUBMITTED ## AU: Search for updates [CallId = {...} ServiceId = {...}]
2014-09-24 19:24:50:822 740 ed4 Agent *** END *** Queueing Finding updates [CallerId = Windows Update Command Line Id = 1]
2014-09-24 19:24:50:822 740 ed4 Agent *************
2014-09-24 19:24:50:822 740 ed4 Agent ** START ** Agent: Finding updates [CallerId = Windows Update Command Line Id = 1]
2014-09-24 19:24:50:822 740 ed4 Agent *********
2014-09-24 19:24:50:822 740 ed4 Agent   * Online = Yes; Ignore download priority = No
2014-09-24 19:24:50:822 740 ed4 Agent   * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-09-24 19:24:50:822 740 ed4 Agent   * ServiceID = {...} Managed
2014-09-24 19:24:50:822 740 ed4 Agent   * Search Scope = {Machine & All Users}
2014-09-24 19:24:50:822 740 ed4 Agent   * Caller SID for Applicability: ...
2014-09-24 19:24:50:845 740 ed4 EP Got WSUS Client/Server URL: "http://wsusserver:8530/ClientWebService/client.asmx"
2014-09-24 19:24:52:479 740 ed4 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-09-24 19:24:52:479 740 ed4 PT   + ServiceId = {...}, Server URL =
http://wsusserver:8530/ClientWebService/client.asmx
2014-09-24 19:24:52:499 740 ed4 PT WARNING: Cached cookie has expired or new PID is available
2014-09-24 19:24:52:499 740 ed4 EP Got WSUS SimpleTargeting URL: "http://wsusserver:8530"
2014-09-24 19:24:52:508 740 ed4 PT Initializing simple targeting cookie, clientId = ..., target group = Server, DNS name = wsusserver.mydomain
2014-09-24 19:24:52:508 740 ed4 PT   Server URL =
http://wsusserver:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-09-24 19:25:02:534 740 ed4 Agent Reading cached app categories using lifetime 604800 seconds
2014-09-24 19:25:02:534 740 ed4 Agent Read 1 cached app categories
2014-09-24 19:25:06:613 740 ed4 Agent   * Found 0 updates and 68 categories in search; evaluated appl. rules of 565 out of 867 deployed entities
2014-09-24 19:25:06:639 740 ed4 Agent Reporting status event with 98 installable, 2 installed, 0 installed pending, 0 failed and 0 downloaded updates
2014-09-24 19:25:06:640 740 ed4 Agent *********
2014-09-24 19:25:06:640 740 ed4 Agent ** END ** Agent: Finding updates [CallerId = Windows Update Command Line Id = 1]
2014-09-24 19:25:06:640 740 ed4 Agent *************
2014-09-24 19:25:06:640 740 ed4 IdleTmr WU operation (CSearchCall::Init ID 1, operation # 18) stopped; does use network; is not at background priority
2014-09-24 19:25:06:640 740 ed4 IdleTmr Decremented PDC RefCount for Network to 0
2014-09-24 19:25:06:640 740 ed4 IdleTmr Decremented idle timer priority operation counter to 0
2014-09-24 19:25:06:640 740 f88 AU >>## RESUMED ## AU: Search for updates [CallId = {...} ServiceId = {...}]
2014-09-24 19:25:06:691 740 f88 AU   # 0 updates detected
2014-09-24 19:25:06:714 740 f88 AU #########
2014-09-24 19:25:06:718 740 f88 AU ## END ## AU: Search for updates [CallId = {...} ServiceId = {...}]
2014-09-24 19:25:06:718 740 f88 AU #############
2014-09-24 19:25:06:719 740 f88 AU All AU searches complete.
2014-09-24 19:25:06:720 740 f88 AU AU setting next detection timeout to 2014-09-26 08:23:25
2014-09-24 19:25:06:729 740 f88 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-09-24 19:25:06:731 740 f88 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-09-24 19:25:11:701 740 950 Report REPORT EVENT: {...} 2014-09-24 19:25:06:639+0200 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 Windows Update Command Line Success Software Synchronization Windows Update Client
successfully detected 0 updates.
2014-09-24 19:25:11:702 740 950 Report REPORT EVENT: {...} 2014-09-24 19:25:06:639+0200 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 Windows Update Command Line Success Pre-Deployment Check Reporting client status.
2014-09-24 19:25:11:807 740 950 Report CWERReporter finishing event handling. (00000000)
2014-09-24 19:32:59:800 740 818 AU User login event timer expired for session id: 2.
2014-09-24 19:32:59:809 740 818 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-09-24 19:32:59:809 740 818 AU #############
2014-09-24 19:32:59:809 740 818 AU ## START ## AU: Install updates
2014-09-24 19:32:59:809 740 818 AU #########
2014-09-24 19:32:59:809 740 818 AU   # Initiating scheduled install
2014-09-24 19:32:59:982 740 818 AU WARNING: There are no approved updates to install
2014-09-24 19:32:59:982 740 818 AU   # Exit code = 0x8024000C
2014-09-24 19:32:59:982 740 818 AU #########
2014-09-24 19:32:59:982 740 818 AU ## END ## AU: Install updates
2014-09-24 19:32:59:982 740 818 AU #############
2014-09-24 19:39:58:788 740 950 EP Got WSUS Client/Server URL: "http://wsusserver:8530/ClientWebService/client.asmx"
2014-09-24 19:39:58:833 740 950 PT WARNING: Cached cookie has expired or new PID is available
2014-09-24 19:39:58:833 740 950 EP Got WSUS SimpleTargeting URL: "http://wsusserver:8530"
2014-09-24 19:39:58:833 740 950 PT Initializing simple targeting cookie, clientId = 07baaad3-1ae4-4f14-895e-ecd098f08a43, target group = Server, DNS name = wsusserver.mydomain
2014-09-24 19:39:58:833 740 950 PT   Server URL =
http://wsusserver:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-09-24 19:39:58:845 740 950 EP Got WSUS Reporting URL: "http://wsusserver:8530/ReportingWebService/ReportingWebService.asmx"
2014-09-24 19:39:58:845 740 950 Report OpenReportingWebServiceConnection, reporting URL =
http://wsusserver:8530/ReportingWebService/ReportingWebService.asmx
2014-09-24 19:39:58:845 740 950 Report Uploading 2 events using cached cookie.
2014-09-24 19:39:59:162 740 950 Report Reporter successfully uploaded 2 events.
2014-09-24 19:40:59:844 740 950 Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
2014-09-24 19:43:00:850 740 818 AU ########### AU: Uninitializing Automatic Updates ###########
2014-09-24 19:43:00:851 740 818 WuTask Uninit WU Task Manager
2014-09-24 19:43:01:000 740 818 Service *********
2014-09-24 19:43:01:000 740 818 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-09-24 19:43:01:000 740 818 Service *************

Similar Messages

AppleScript to Find Contacts Not Assigned to a Group

Does anyone know if there is an AppleScript for Address Book that finds contacts that are not assigned to groups?

Ask at the AppleScript forum under OS X Technologies or check the Automator forum under Leopard.

Assignment of Group Asset to an already existing Asset

We have a Legacy created Assets which already have value. These Assets were created two year ago. At that time we have not assigned any Group Asset to them. Now in the current year we want to assign group asset to these asset. My questions are:
1. Is it possible to do so.......in the current year....?
2. If yes, how the value of the Asset would flow & what value would flow, balance as on the date of creation of group asset?

Hi Akhil
The T code to upload the group asset values is AS82...
Since your takeover date is 2 years old, I dont know if you will be allowed to enter them now.... Go to AS82 and see if it helps
Regards
Ajay M

Contacts not assigned to a group

I've been working on getting my contacts and calendars synced up and going fairly well. Have a completely mixed environment: Outlook 2007, iPad IOS 7.1.2; Android phone and Macbook (10.6.8 but not in the current sync process).
What I've found after a lot of troubleshooting is that I have duplicate contacts and am trying to figure our how to find and remove them. Now before you just say search for them and remove one of the duplicates, the issue is more complex. First, I am very much a geek so know what I'm doing - that doesn't mean that I don't miss simple things now and again though but please don't assume I've not check to see if it's plugged in and turned on
I, like most I'd guess, prefer to keep my contacts grouped together. When I first setup the sync, everything was on the iPad as I had manually (wifi/USB) kept the iPad and Macbook synced. Simply setting up the iCloud sync from the iPad was simple enough and never really noticed any issues - doesn't mean it didn't start there though; just didn't see it.
In Outlook, there is a plugin for iCloud and I have that loaded with no problems. Contacts all came in and the groups all appear to work. If I create a new group in Outlook, I see it on the iPad and phone. If I delete it from the iPad, it's gone everywhere.
Now to where the duplicates are. When I look at the counts in Outlook - just because it's the easiest place to do it, the total contacts added up from all the groups is 626. The total contacts when I get the properties of the top level is 833
If I select the top level, I can see the duplicates, if I select the individual groups, there are none. I verified this on the iPad by manually selecting each group rather than the "All Contacts". Doing this, the duplicates are gone. So clearly, at least to me, what has happened is that there are 208 contacts (834-626) that are in iCloud but not assigned to a group. The problem is, I can't see them without selecting "All Contact" and at that point, I won't know which one I'd be deleting and would rather not delete the one that is currently and correctly assigned to the group.
Hope that gives someone enough details to give me some ideas. I've already though about manually exporting all of the groups one at a time and deleting them until all I have left is "All Contacts"/top level in Outlook and then deleting whatever is left and re-importing all of the groups but would rather not do that unless I have to. I'm guessing the biggest reason this is so hard is that the vCard standard did not fully support groups until v4.0 and Outlook is v2 or v3?
Thanks in advance.

I'm not sure there is an easy way to do this. In addition to the approach you mentioned of exporting the group contacts as vCards (which would probably involve importing them to Gmail so you could export an iCloud-compatible vCard), then deleting the remaining contacts and reimporting the vCards, another option would be to identify the duplicates in the All Contacts list and edit the name of one of each of the duplicate (by, for example, adding a "1" to the last name). That would allow you to go through your groups and identify which one belongs to the group and which doesn't. It would still be a tedious exercise though.

ABAP Query : user is not assigned to user group

Hello All,
i have created user group using sq03 and assigned user name for change authorization in 'assign users and infosets'.
But when user tries to run query using sq01 system is giving message 'User XXX is not assigned to any user group'.
I tried every thing but facing same problem.
Could anyone please help me out .
Thanks

I actually assigned the user group to a role in SQ10. The user is assigned to the role. I also created a new post under Security which has more detail:
http://scn.sap.com/thread/3198604

Not assigned to user group /SAPQUERY/H2

Dear Gurus,
I have assigne Tcode S_PH0_48000510 to a user but when she executes this TCode, she is getting an error that "Username is not assigned to user group /SAPQUERY/H2. How can I resolve this?
Chansa

Hi,
Assign the user name to the relevant user group via SQ03.
regards,
Dilek

Business system * is not assigned to a business system group

I am running XI3.0 (SP12), Oracle 9.2.0.6 on a Windows 2003 Cluster Server.
I am trying to import some config from the Integration Directory from Dev into QA but I am getting the following error:
<b>IMPORT XI 3.0 Design Objects
Business system XIT is not assigned to a business system group with the ID (XISystemGroup)</b>
I have copied my Dev SLD into my QA SLD.
Has anyone else come across the error??

Barry,
You should ideally have assigned Business systems in ur QA landscape to 1 group & Business systems in your dev landscape to another group. Also , hope you have created transport targets for all ur Business systems in dev environment.In ur QA SLD , you should have two entries for each business system , something like
DEV-BS-1 -> transport target -> QA-BS-1
QA-BS-1 -> transport source -> DEV-BS-1
Thanks
Saravana

System not assigned to any business system group

In transaction /SAPAPO/MAT1 an error occurs when I try to create a new product.
Error message: " System SC1CLNT100 not assigned to any business system group".
When I received this error I created business system group in SLD and assigned my system to this new business system group.
Then I went to transaction RZ70 and executed Data Collector without Job scheduling.
But when start transaction /SAPAPO/MAT1 again the error /SAPAPO/MAT030 still occurs.
What should be done to make changes, which I made in SLD visible for the system?
Thank you in advance,
Kind regards,
Maria Kazakova

I assume you assigned this BSG in the IMG in APO
"As an independent logical system, the APO System must, in addition to the SAP R/3 Systems, be assigned to a business system group (BSG)."

Sales group not assigned to sales office

Hi,
When i tried to create ERP quotation from Opportunity, "Sales group not assigned to Sales Office" error is arised.
With Regards
Selvam T

Hi Selvam,
Check in Opportunity the sales org. u have used. Then go to path: SPRO-> CRM-> Master Data-> Org. Mgmt-> Assignment of Org. units from SAP ECC.
In this node, check the corresponding sales group you are using in ECC and then go to ECC and map the sales office and sales group.
If you dont want to use sales group or sales office then go to tx. PPOMA_CRM in CRM. Select the org. which you are using, then click on Function tab, select Sales radio button and delete the assignment for R/3 sales office and sales group and uncheck them as well.
Let me know in case you need any further information.
Warm Regards,
MG

Costing Variant not assigned to Number Range Group

Hi,
I have an error while doing Sales order costing. When i create Sales order and do costing for it (Ctrl+F7) it give me an error,
"Costing variant XYZ is not assigned to a number range group"
Where do i need to assign the costing variant to a number range group.
Please advise.
Thanks in Advance,
Safi

Hi Ramana,
Thanks for the reply.
I have mainted the number rnages in VN01.The issue still persists.
Safi

SAP CRM Error: A number range is not assigned to account group

Hi Experts,
We have a stuck BDOC for a BP with "ZEmployee" (custom) role in CRM with error as "Fill in Required fields". We knew this is b'cos one of the mandatory field in not maintained in CRM. After maintaining the mandatory field in CRM; we are re-processing the stuck BDOC and again it is getting into the error message with error "A number range is not assigned to account group Sold-to party".
We have checked the number range and grouping configuration both in ECC and CRM. But still not able to identify the gaps. Is there a detailed step-by-step approach which can be taken up to resolve the issue.
Request you quick response.
Thanks,
Chaudh.

HI Chaudh,
I am facing similiar issue. When i am creating BP in CRM WebUI, I am getting an error message: "Error in Transporting Number Range".
Could you please share your findings, how you solved your issue?
Dave

BDOC Error: A number range is not assigned to account group Sold-to party

Hi Experts,
We have a stuck BDOC for a BP with "ZEmployee" (custom) role in CRM with error as "Fill in Required fields". We knew this is b'cos one of the mandatory field in not maintained in CRM. After maintaining the mandatory field in CRM; we are re-processing the stuck BDOC and again it is getting into the error message with error "A number range is not assigned to account group Sold-to party".
We have checked the number range and grouping configuration both in ECC and CRM. But still not able to identify the gaps. Is there a detailed step-by-step approach which can be taken up to resolve the issue.
Request you quick response.
Thanks,
Chaudh.

Hi Chaudh,
Please find the exact solution here.
http://wiki.sdn.sap.com/wiki/display/CRM/IssuesduringBusinessPartnerreplicationbetweenCRMandERP
Cheers,
Josh

Purchasing group O 50000018 is not assigned to purchasing organization O 50

HI:
   We use plan-driven prcurement to transfer pr from R/3 to SRM.For the first time we transferred this PR,everything is OK.but when I modified this PR and transferred it again. it was blocked in smq1.
   there a errror message exists in slg1 in srm.
   Purchasing group O 50000018 is not assigned to purchasing organization O 50000019
   System of purchasing organization O 50000019 and purchasing group O 50000018 differ
O 50000018 is a local pur group while O 50000019 is a pur org from R/3.
   hope someone can help me.TKS
Message was edited by:
        hong pan

Hi Hong,
The error shows that the P.Group (50000018) is not responsible for P.Org (50000019).
It shows the P.Group (5/18) is a local P.Group and is not linked to the back end (R/3) P.Group. You can check this in the Function tab of the P.Group. Also in the responsibility tab of the P.Group you should mention the responsible P.Org (Org. I.D).
After checking these settings and making the necessary changes try to create and transfer the P.R. Also ensure the queues should be clear before transferring the P.R to SRM.
Let me know the outcome for further help.
Any Claraifications are welcome.
Awad points for suitable answers.
Rgds,
Teja

Policies assigned to groups - membership changes not working

I have a single ZESM IR8 server setup.
All security throughout my environment, ZESM and otherwise, is based on group membership.
If I change a user from one group to another group this change does not reflect in their policy assignment.
Scenario: GroupA = standard user policy, GroupB = power user policy.
UserA was first in Group A and therefore got the standard user policy.
UserA now requires the power user policy.
Remove UserA from GroupA and add UserA to GroupB (in iManager).
UserA does NOT get the "power user" policy that is assigned to GroupB
Am aware that I can assign the policy at a user level but this is NOT an option in my environment. All security assignments MUST happen at a group level.

What you observed is the expected behavior.
ZESM doesn't updates group membership in real time once a policy has been published. I've described this behavior on previous posts.
What the MC does behind the scenes when you click "Publish" on a container or group object is to assign the policy individually to each member/user. For groups, it resolves membership at the time the policy is published then the MC iterates among each member assigning the policy to each of them. That's why you don't see updates once the policy is published.
Try Updating the published policy to see if that works. From the docs:
Updating a Published Policy
Once a policy has been published to the user(s) or computer(s), simple updates can be maintained by editing the components in a policy, and re-publishing. For example, if the ZENworks Endpoint Security Management Administrator needs to change the WEP key for an access point, the adminstrator only needs to edit the key, save the policy, and click Publish. The affected end-users and computers receive the updated policy (and the new key) at their next check-in.
>>>
From: laurabuckley<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 12/15/2009 7:16 AM
Subject: Policies assigned to groups - membership changes not working
I have a single ZESM IR8 server setup.
All security throughout my environment, ZESM and otherwise, is based on
group membership.
If I change a user from one group to another group this change does not
reflect in their policy assignment.
Scenario: GroupA = standard user policy, GroupB = power user policy.
UserA was first in Group A and therefore got the standard user policy.
UserA now requires the power user policy.
Remove UserA from GroupA and add UserA to GroupB (in iManager).
UserA does NOT get the "power user" policy that is assigned to GroupB
Am aware that I can assign the policy at a user level but this is NOT
an option in my environment. All security assignments MUST happen at a
group level.
laurabuckley
laurabuckley's Profile: http://forums.novell.com/member.php?userid=122
View this thread: http://forums.novell.com/showthread.php?t=395870

Group is not assigned error in LSWM when uploading Routings

Hi All,
I am trying to upload the routings using LSMW Direct Input method using program RCPTRA02. While executing the lsmw, i am getting an error " Group cannot be determined for material XXXXXXXX plant XXXXX". But the SAP has to assign the Group while creating the routing for the material and plant. I dont know why its throwing that error. Is there any problem with the mapping which i dont think so. Any suggestions to resolve the error.
Thanks

Hi ben,
we have exactly the same problem. Have you found some solution?
I would appreciate so much if you could keep in contact with me in order to explain me the solution. Please reply the message and write the solution as detailed as it would be possible.
Thanks in advance.

PCs not assigned to group on WSUS

Similar Messages

Maybe you are looking for