Assignment of Group Asset to an already existing Asset

We have a Legacy created Assets which already have value. These Assets were created two year ago. At that time we have not assigned any Group Asset to them. Now in the current year we want to assign group asset to these asset. My questions are:
1. Is it possible to do so.......in the current year....?
2. If yes, how the value of the Asset would flow & what value would flow, balance as on the date of creation of group asset?

Hi Akhil
The T code to upload the group asset values is AS82...
Since your takeover date is 2 years old, I dont know if you will be allowed to enter them now.... Go to AS82 and see if it helps
Regards
Ajay M

Similar Messages

  • Account assignment for group asset is different from that in asset

    Dear experts,
    I have creted one main asset . and i have created group asset. and my main asset class and group asset class are both are different.If i continue that error assets are shoud be craeted .but the depreciation key and usefull life and ordinary depreciation will going and it's showing grey.
    My question at the time of assighning the group asset for the particular assets the below error is comming.
    Account assignment for group asset is different from that in asset
    Message no. AA810
    Diagnosis
    The account allocation 14000 of the group asset 140000001 0 is different from account allocation 1000 of the asset.
    System Response
    This error needs to be corrected for balance sheet valuation (usually determined in depreciation area 01). For all other depreciation areas, this is only a warning you should check.
    Procedure
    Check your entry. When an individual asset has a different account assignment than the group asset, it is not possible to reconcile the individual asset to the group asset in reporting by means of accounts.
    kindly help on this issue
    regards
    venkataswamy

    Hi sudhakar
    Thanks for your reply
    1) for example i have buliding asset class and i have one group asset class.under the building asset account determination i have assighned the gl a/c for both b/s and book deprecitaion
    In groups asset class also i have done same things. i have craeted asset under building asset class and created one asset under group assets.
    then assighned the group asset to main assets. the error is comming like this Account assignment for group asset is different from that in asset
    I have serched in sdn forum and service .sap.com . they are saying you can use same gl a/c for both asset class.for depreciation .i have tried this scenario. still i am getting the same error and same problem.
    The most important thing is we are working on ECC 6 versions
    sap note 76186.
    Kindly help me
    Regards
    venkataswamy
    Edited by: venkataswamy bathini on Jul 6, 2009 9:22 AM

  • How to change Function Group for a function already exists - Urgent

    Hi,
        One field exit is there, with some local function group name. Now i need to transport that field exit into quality. so i saved field exit into one package and i created one more func grp with new naming convention. now my problem is field exit is not allowing to change the func grp name there. it is in non-editable mode. what should i do, to change that. Can anyone help me...Urgent.
    Thanks in Advance.
    Siva Sankar.

    As I understand, you want to change a SAP function module into a Z function group, that's not allowed.
    Even if you have to change any function from one function group to another, you have to copy it (taking care of global code in the TOP include for the function group), delete it from the original group and create it into the new.
    Function groups are a kind of container programs and each Function module is a component of them, not the other way.
    Regards.
    Please reward points if helpful.

  • Group Assets IT - Depreciation

    Hi All,
    I am calculating Depreciation on Assets based on Income tax act of India.
    Based on this the assets purchased less than 180 days should 50% depreciation charged.
    this is running fine when I calculate the depreciation on Individual Assets.
    But Client request for Groups Assets, So I assigned the Groups assets.
    In case of Groups Assets. Depreciation for the assets less than 180 days also it is calculating the 100 % Dep.
    Any one know how to solve this. Is there any settings needs to be change?
    Thanks
    Ravi

    Hi,
    In OVAH
    settings is maintained like this.
    K4     01     Pro rata at period start date              0     0
    K4     02     Pro rata upto mid-period at period start date              1     15
    K4     02     Pro rata upto mid-period at period start date              2     14     1
    K4     02     Pro rata upto mid-period at period start date              3     15     2
    K4     02     Pro rata upto mid-period at period start date              4     15     3
    K4     02     Pro rata upto mid-period at period start date              5     15     4
    K4     02     Pro rata upto mid-period at period start date              6     15     5
    K4     02     Pro rata upto mid-period at period start date              7     15     6
    K4     02     Pro rata upto mid-period at period start date              8     15     7
    K4     02     Pro rata upto mid-period at period start date              9     15     8
    K4     02     Pro rata upto mid-period at period start date              10     15     9
    K4     02     Pro rata upto mid-period at period start date              11     15     10
    K4     02     Pro rata upto mid-period at period start date              12     15     11
    in the table  details shows like this.
    Table:          T090NP
    Displayed Fields:  15 of  15  Fixed Columns:                3  List Width 0250
       MANDT AFAPL  METPER PERBZU PERBNA PERBAB PERBUM XBZDAT PERBAW PERBIF PERBAA PERBZR PERBD1 PERBD2 PERTXT
       740   0AT    007    04     06     05     05     X                                                04/06/05/05
       740   0BR    007    04     06     05     05     X                                                04/06/05/05
       740   0PL    002    11     11     11     11     X                                                11/11/11/11
       740   0PL    003    01     01     01     01     X                                                01/01/01/01
    But any where I have to Assign this steps to Deprecation Key for Groups Assets?
    thanks
    Ravi

  • Entry Already exists in the follwoing table : Error

    SBO 2007A.
    System shows error while entering business partner customer or supplier group as " This entry already exists in the following tables 'Card groups' (OCRG) (ODBC -2035)
    kindly help as clinet is unable to create any of the business partner group.

    Check if the group exists already by running this query in Query Generator
    SELECT *  FROM OCRG T0

  • Group Asset

    Hi all,
    New Assets or without transactions assets are accepting for assignment of group asset in asset master data(Dep. area view).
    But old assets (with transactions) are not accepting for assignment of group asset in the asset master(Dep. area view). This field shows display(gray color) only in change mode. 
    How to active this field.

    Venkat,
    This path specify dep. area for group asset.
    My Question : The old asset masters(with transactions) does not permit group asset assignment.  This field appears display mode in old asset master.  How to assign group asset no. in  old asset masters.

  • Assignment of Asset Number to Group Asset

    Hi All,
    For our client they are using Group Asset for the calculation of Income Tax Depreciation (Depreciation Aea:15), actually he is having two types of Land 1. Free hold land and 2. normal Land.  They created total 5 asset through(AS01) like 10000, 10001,10002,10003 and 10004.  and a Group asset through (AS21) 110000 and assigned all these assets in one group asset but they want to create two Group assets 1. 10000 & 10001 2. 10002,10003 & 10004 as another Group asset for income tax depreciation purpose. Can somebody give me the suggetion how to create 2 group assets.
    Regards,
    R.K

    Hi Raghavendran,
    For the Group Asset they assigned the Depreciation Key:LINK(Straight line from acquisition value to Zero without Interest) for all the assets becuase of that it is calculating depreciation (i.e., Asset Value/No. of years) as we know for Free Hold Land Depreciation won't be calculated. For that we want to created another Group Asset with Depreciation Key: 0000(No depreciation and no interest), i want the procedure of how to create 2 group assets (1. with assets 10000 & 10001 and the other with assets 10002,10003 & 10004).
    Regards,
    R.K

  • Legacy data transfer for new depreciation area for already existing assets

    Hi all,
    I am doing legacy data transfer for New deprecaition area for already existing assets through AS92.
    I like to give Ordinay depreciation posted amount  for the current FY for these assets in AS92, but i find this field is not editable inAS92.
    Please guide me to upload the Posted deprecaiton amount (for current FY) for these assets. I have assets both which are acquired in Last FY year and also this FY year.
    Regards,
    Srinivas

    HI,
    I have to migrate Posted dpereciation for new depreciation for nearly 3000 assets, In transaction 147, where i need give Acquituion value aslo, please note these are not new assets, these are prior year assets wiht opeing balances. If we use 147 system will take it is current acquition.
    Please note my transter date is 28.02.2010, I have already run AFAB for this company cdoe Feb 2010 for other depreciation areas.
    Now i am trying to update Opening APC Cost and Opening Accumulated deprecation for these assets and also posted depreciation for this FY.
    Where in AS92, i am able to update Opeing APC Cost and Opeing  Acc Dep succsfully for new dep area for already existingassets, bu Posted deprecation field is not editable.
    Please guide me how to update posted deprecation for new deprecaition area  in AS92 or some other way for already existing assets.
    REgards,
    Srinivas

  • Help with importing photos - IPhoto assigning file names that already exist

    When I import photos from my canon powershot camera, IPhoto has begun assigning file names that are the same as filenames that already exist on photos imported previously. It appears it is deleting those older files (when I go look in my photo library, the older one with the same name is now gone).
    I don't know how to name photos as they are imported as it seems to be done automatically and I'm afraid to import more photos and loose my old pics. Can't find anything on the internet when I search on this question - can anyone help?

    Thanks so much for your quick reply, TD.
    What happens when I plug in my camera is that Iphoto opens, asks me if I want to import photos (and if I want to delete originals), and I click okay or whatever and they are imported. I name the roll/folder, and I photo puts them in the library in that folder in that year.
    It makes sense that the camera is numbering them. I think that the ones it is using the same numbers for (ie - IMG0080.jpg) are the numbers on older photos that were assigned by a different camera that we used to have.
    So I guess the canon isn't searching on all photo names that have been used, just the ones that it has used in the past.
    Unfortunately, when the new photo is named with the same name as an old one, that old one is literally deleted - at least as far as I can tell - and when I go look for it in my photo library, it is no longer there.
    I might try to see if there are any help forums for the canon powershot and see what I might learn there.
    THanks so much for your help!

  • Asset number already exists in AS01

    Hi all,
    I am creating a new asset in AS01. The problem is that I am getting the error saying that the asset number already exists. Typically SAP continues on from the last old number, but now it is restarting from 30000. The number is being generated automatically.
    Does anyone have any ideas on how to fix this numbering issue? I have looked in config but have failed to find anything.
    Thanks,

    Hi.
    Run Tcode AS08. Choose company code and click on status. Change the number range to match your current number range.
    This issue may be becaue someone might have resetted the number range using the path given above.
    Regards

  • Group file already exists

    Can someone please explain what causes this error:
    OCA-30023: error fetching result set
    [POL-3253] group file already exists
    I am using Oracle Lite 8. I have created a view that returns all records from a table with the related data from other tables. Whenever I use this view in a query, adding a where clause with a date range, I get the above mentioned error. This only happens when the database is open in another application. If I use the view in a query without a where clause, it works fine, but I get more data than I want to view. The view is shown below.
    Thanks for any info.
    John Valentino
    create view EventViewEx
         (EventIndex,LogDate,Tool,ModuleId,Module,Type,Event,StrDesc1,StrDesc2,StrDesc3,StrDesc4,IntDesc1,FptDesc1,UserName) as
    select     Event.EventIndex,
         Event.EventDate,
         Tool.ShopOrder,
         Event.ModuleID,
         Module.ModuleName,
         Event.EventType,
         Names.Name,
         Event.EV_StrDesc1,
         Event.EV_StrDesc2,
         Event.EV_StrDesc3,
         Event.EV_StrDesc4,
         Event.EV_IntDesc1,
         Event.EV_FptDesc1,
         Users.UserName
    from     Event,
         Names,
         Module,
         Tool,
         Users
    where     Event.ToolIndex = Tool.ToolIndex
    and     Event.NameId = Names.NameId
    and     Event.ModuleId = Module.ModuleId
    and     Event.UserIndex = Users.UserIndex;

    Thanks John. We downloaded the omwb13100 zip file.
    Instead of using the default repository, I tried to log-in to a database on the local NT machine to recreate a new repository. Everything went fine afterwards.
    We're all set for now but it would be nice to find out what happened to the default repository. Thank you.

  • Assigning budget profile to already existing project

    Hi All,
    Please suggest how can we assign budget  profile to already existing project .

    Hi Vishal,
    You can go the Project builder, open the particular project and in the detail screen of the project definition, enter the budget profile in the control data tab page.
    Or goto SPRO->Project system->Costs->Budget->Stipulate default budget profile for Project definition and assing the bedget profile.
    Or enter the Budget profile in the Controlling tab page of the Project profile.
    You can do all these for existing projects.
    regards
    Pratap.V

  • POL-3253 - Group file already exists

    We have a daily process that converts MS Access 97 to Oracle using Migration Workbench. This has been working fine until we got the following error from the error.log file:
    EXCEPTION :LoggingImpl._writeLog java.sql.SQLException: [POL-4202] can't update while select is active in read-committed mode
    EXCEPTION : LoadTableData.run() : [POL-3253] group file already exists
    Is there any site that I can look up this error message or can somebody please tell me what this meant? Thanks.
    null

    Thanks John. We downloaded the omwb13100 zip file.
    Instead of using the default repository, I tried to log-in to a database on the local NT machine to recreate a new repository. Everything went fine afterwards.
    We're all set for now but it would be nice to find out what happened to the default repository. Thank you.

  • Assign already-existing hyperlink to new text

    i know this should be ridiculously easy but i can't figure it out.
    i have an indesign document with several hyperlinks that are used repeatedly. i'm trying to assign one of these already-existing hyperlinks to text, but when i select the text and click on the hyperlink in the hyperlinks panel, it doesn't stick to the text.
    i have the option of creating a new hyperlink for every instance, but isn't there a way to assign a hyperlink i've already created to the text i've selected?
    thanks in advance for any help.

    >
    Justin wrote:
    > Hi,
    >
    > Please use tcode: OX18 to assign the plant to company code.
    >
    > You may follow my below printscreen for example.
    > http://rukawaw-tb.blogspot.com/2010/08/assign-plant-to-company-code.html
    >
    > Thanks.
    I guess it is clear how to do it technically, the big question here is: can you really do it if the plant was already used and had done business
    Does SAP issue a warning/error if you do it for a plant that had already business?
    I have not the option to test this case, but I guess SAP would allow this customizing step, as SAP expects that consultants are thinking before acting.
    I personally think that you create inconsistencies.
    if a  plant A that is assigned to company A has inventory then this inventory is owned by company A., if you just change the assignment, then I dont believe that SAP will do all financial postings in background to get the inventory values from company A to company B.

  • Adobe workbench errors on checkin:  Asset already exists / file already exists

    Adobe workbench for Myserver checkin gives errors:  "Could not create the asset because the asset already exists" and/or "File already exists in global store with that name".  How does one fix this? 
    This seems to especially happen when I change login to workbench user/configuration/"mode" etc.

    If worst comes to worst:
    Save relevant directories in completely separate windows backup directory path.
    Remove all sub-folders from LC workbench (everything below the /1.0 leaf).
    Restore directories from backup path.
    This seems to ALWAYS work.

Maybe you are looking for