PCUI - Multiple Selection at Position 2 (Details Area 1 onwards)

hi,
Is it possible to select more than one records on a list appearing in the "Detail area 1"?
I was not able to find a list functionality with multiple selection for anything other than result list.
Is there a way we can simulate the multiple selection on a list in "Detail Area 1"?
Looking forward to a speedy reply.
Cheers
Aniruddha

Hi,
It is possible. You have to set the screen type as multi selection .You can find it in PCUI Service contract item level.
Thanks and Regards,
Abdul Raheem S

Similar Messages

  • Flash CS4 multiple selection probleme, Scale/position

    Hello.
    i noticed that if you have a flash cs4 AS2 where you need to make a zoom and unzoom effect on multiple element, you will have a painfull time building that scale+position effect. Let me explain.
    Everything need to be scaled from 0 to 100 % and then from 100 % to 0. Some of those need to be scale in the exact position where they are, but other need to also move to fit the zoom effect for a result of a central effect for everything ). For some unknow reason the Tween is not working for those item. So i had to do it manually using 50 keyframe of 1 frame ( ho joy... dont forget to times that by 19)
    We all know that when you use the free transform tools, you have the transform box + the little circle that define the effect "center" location of the item. Whatever the location of that little circle, when you zoom it will go away in the opposite direction and the reverse is also true. So far it work perfectly.
    however if you take the time to set that little circle for all your element perfectly and test it with all element, you should be able to select ALL of your element at the same time and execute the same move as if you were doing it on a single element right ?. Well no.
    If you do it with a single element and play with the scale ( with constraint) it does what you want. But if you select them all, you discover quickly enough that it is no longer working. You also discover that it is adding a NEW little circle ( "center" position) that is offset. Fair enough, i move that circle at the exact location of the zoom effect then try to make the zoom, and TADAM.. it is not working, it is still messing with the direction of the scale/position.
    Ctrl Z. unselect everything, and try again with only 1 random element ? work perfectly. Try with all of them at the same time ? dont work.
    REmember all those element zoom at the same location, so you shouldn't have any probleme with the new little circle as long you move it at the same spot than the other. But no. even if it is there, it will still scale/position South of where it suposed to be. Doing it all at the same time while setting that circle should save you time, but right now it is the exact opposite, an effect that could take 1 hour to make will take me the full day, if not more.
    any clue ?
    I do hope i'm clear enough
    Thx.

    Yes Kglad, that the little circle thing i was speaking about.
    It is set manually to fit the design and if i select my item 1 by 1 and zoom them manually, it is working.
    The bug is when you select them all ( AFTER setting all the registration point ) you will get another one that is not set, so even if you set it manually at that time ( when all is selected ) and THEN apply the zoom, it will no longer work.
    thats the bug.

  • Position relationship data like Task & Substitution in the Details Area

    Dear All
    Can be display the task details & the substition details linked to a position through relationships B007 & B210 using an custom view in the Details area of Nakisa.
    We can create an custom view with the required evaluation path but can the task & substitution details also get displayed in the Details area...?
    Regards
    Ravindra

    Hi Ravindra,
    Do you mean that you want to display information regarding Task and Subtitution in the Position Details Panel (not in a view in the org structure)?
    If yes, then this is possible. You can add a new NakisaRFC function in the Data Center that can extract this information. you need to use the option Edit/Create new data element joining multiple SAP Tables.
    Best regards,
    Luke

  • Report with multiple Detail Area

    Hi All,
    Please see the Report pointed to the link below:
    [Report with multiple Detail Area|http://us.share.geocities.com/felix5ac/fairway.jpg]
    Some Explanations:
    ========================
    (1) The line with "ABCDEFGH..." is variable data coming from the database in the Detail Area
    (2) The lines with "WBLNX'" "123, 123.12", 
                             "WBLNX'"
       are variable data associated with the same Heading: "ABCDEFGH..."
    (2b) There can be multiple lines of data in the detail area (i.e. 1 or more "ABCDEFGH..." and the associated WBLNX and numbers...)
    (3) Item Code Descriptions ==> is a Header Info
    (4) ARL ... and FPHI... ==> are variable data and lines in these area can be 1 line; it can be 4 lines; it can be 10 lines...
    (5) Lines FROM "Artwork Procedures..." to the the end of the page are static.
    QUESTION:
    ===================
    How do I best design these Report with the multiple detail areas? Again, please see link of the Report above...
    Thanks and Best regards,
    Felix

    Hi Felix
    You can place the less detailed fields in the regular sections of the report and wherever you require multiple lines you can use the subreports.
    Hope this helps.
    Regards
    Nikhil

  • File Dialog (Details View and Multiple Selections for View File Type)

    I would like to use the generic windows dialog box found in the toolbar under:
    File I/O/Advanced File Functions/File Dialog
    What I would like to do is have multiple selections for the file type, for example one menu selection is *.txt, another is *.rtf, another is *.csv, etc. Listing a single type is straightforward.
    Also does anyone know if there is a way to have the dialog open in the DETAILS view automatically?
    Thanks for any help!
    Carlton

    Hi,
    You can do it in following ways:
    1. Write in pattern input the string "*.txt; *.csv; *.rtf". This will show to the user only files with this extensions in the dialog.
    2. Another way is to create ring or menu where user could specify the extension. Depending on this extension you could wire the appropriate string to the pattern input of "File Dialog.vi"
    I have made an example.
    Good luck.
    Oleg Chutko.
    Attachments:
    fileopen.vi ‏42 KB

  • Multiple selection in a detail block

    In a scenario where there is a master-detail-detail block structure, is it possible to select several records of the first detail block and enter a record for them in the second detail block?
    Thanx in advance.
    P.S. please excuse me if the question sounds weird.

    use this code: i used this for multiple selection in a detail block to delete the selected record. the trick is u need to create a Check box.
    DECLARE
    Num_Total_Records NUMBER;
    Num_Loop_I NUMBER;
    BEGIN
    GO_BLOCK(<BLOCK_NAME>);
    FIRST_RECORD;
    LAST_RECORD;
    Num_Total_Records := TO_NUMBER(NAME_IN('SYSTEM.CURSOR_RECORD'));
    FIRST_RECORD;
    FOR Num_Loop_I IN 1..Num_Total_Records LOOP
    IF <CHECKBOX> = 1 THEN
    <................................................>
    END IF;
    NEXT_RECORD;
    END LOOP;
    <................................................>
    END;

  • Multiple Selection in Search Result List in PCUI

    Hi,
    Our requirement is to allow creation of new records in list view of the PCUI application CRMM_ACCOUNT. I'm using old floor plan CRM 4.0 to meet this requirement. But this is causing a problem. It's not allowing multi select in the search result list (Event INIT, Screen Element SRMS). If I change the screen element to SRME, it allows multiple selection (thru selection checkboxes) but does not allow creation of new records in list view.
    Also, how to activate the multi-valued search on certain fields. I've already checked the "Multi-Value" check box for the relevant field.
    Any help on this will be much appreciated.
    Regards,
    Vishal

    a®s wrote:
    Hi,
    You can find lot of thread in this for forum for your query.
    example
    a®s
    Thanks ! it's helpful!   But my requirement is a little bit different. (Sorry I didn't make it clear)
    I created a table maintenance (SM30) for a table. The F4 Search help should be applied to a field of the table when a user creates a new entry. I hope it makes clear.
    btw: I have awarded some points! Because it's also good to know some other ways:)

  • Multiple selection of sales areas in BP transaction

    Hi,
    In the creation mode of BP for sold-to party, while selecting sales areas, the standard ALV popup does NOT allow multiple selection/maintainance of sales areas.
    Is there an option for multiple maintainance of sales areas. It's time consuming to maintain sales areas for each BP manually.
    Also, is there an API/method to maintain sales area data for BP?
    Thanks
    Kamal

    Hi Kamal,
       You can use followinf function module to update sales area data:
    BAPI_BUPA_FRG0020_ADD : For shipping tab
    BAPI_BUPA_FRG0030_ADD : For billing tab
    BAPI_BUPA_FRG0140_ADD : For organization data tab.
    Hope this will help you.
    Thanks
    Swagatika

  • Help with POST data if  multiple selections are chosen

    I've created a form with a menu (list) that includes all 50
    states. I'm using the POST option, along with PHP, to process the
    form data, which will be emailed to me. The list-menu looks like
    this:
    http://askdave.info/help/states_menu.gif
    and I have "Allow Multiple Selections" checked in the Property
    Inspector.
    If the user chooses multiple states, I want
    EACH of those states to be listed in the email that I
    receive. Right now, if I check multiple states, I only get
    the very last state that's selected. For example, here's the
    email I get after I check 5 different states.
    http://askdave.info/help/formdata.gif
    Problem--> In this email, only one state is listed
    (Hawaii) even though I selected 5 different states. How do I get
    the form data to list ALL states that are checked?
    Here is what I have:
    <form name="form1" method="post" action="process.php">
    <input type="hidden" name="required"
    value="name,phone,email,states,capital" />
    And then for the menu that lists the states, I have:
    <label>
    <select name="states" size="7" multiple id="states">
    <option>All States</option>
    <option>Alabama</option>
    <option>Alaska</option>
    <option>Arizona</option>
    <option>Arkansas</option>
    and so on...
    What am I missing? How do I get the PHP script to send
    multiple values, if multiple values are chosen? (I'm new to PHP, so
    go easy on me. I can post my code, if necessary.) Is this a PHP
    issue, or do I need to add something to the HTML form?

    Hi,
    >>
    I think DynaForm stands for Dynamic Form
    >>
    this makes some sense ;-) I was just wondering because there
    is a pre-made script called DynaForm
    here, but
    it has a different "logistics" than yours.
    However, both "DynaForm" versions are pretty basic, as they
    just deal with non-multiple values - form fields like single line
    input fields, texareas and non-multiple select´s. Your script
    e.g. just loops through all existing form fields using the
    "foreach" method:
    //Pulls form fields & values.
    foreach ($this->post as $field => $value) { // looping
    through all form fields
    if ( $field == 'required' ) continue;
    $this->_addLine($field, $value); // here´s where the
    field´s name/value consolidation happens
    ...and simply consolidates a field´s "value" with its
    associated "name". The problem is : this method just works for
    fields having just 1 value -- but any "multiple value" form fields
    (e.g. your "states" select or checkbox groups which can pass
    multiple values as well) actually require a separate "foreach"
    treatment within the script, and this hasn´t been incorporated
    here.
    That said, I suggest using an other pre-made solution like
    PHP
    Form Mail script that´s capable to handle your multiple
    values - scenario innately.

  • I have used my all store multiple times and it gas worked fine, now it's saying my card details are wrong

    Help please

    go to settings/itunes & app store tap on the ID there then tap view ID and log in then tap on payment information and check details are correct

  • How to create a table with multiple select on???

    Hi all,
            I am  new to webdynpro and my requirement is to create a  table with multiple selection on.I have to add abt 10 rows in the table but only 5 rows should be visible and moreover a verticalscroll should be available to view other rows.Can anybody explain me in detail how to do that.Please reply as if you are explaining  to a newcomer.Reply ASAP as i have to do it today.
                                                                           Thanxs

    Hi,
    1. Create a value node in your context name Table and set its cardinality to 0:n
    2. Create 2 value attributes within the Table node name value1 and value2
    3. Goto Outline view> Right click on TransparentUIContainer>Apply Template> Select Table>mark the node Table and it's attributes.
    you have created a table and binded its value to context
    Table UI properties
    4.Set Selection Mode to Multi
    5.Set Visible Row Count to 5
    6.ScrollableColCount to 5
    In your implemetaion, you can add values to table as follow:
    IPrivate<viewname>.ITableElement ele = wdContext.nodeTable().createTableElement();
    ele.setValue1(<value>);
    ele.setValue2(<value>);
    wdContext.nodeTable().addElement(ele);
    The above code will allow you to add elements to your table node.
    Regards,
    Murtuza

  • Multiple select parameter with each selected value covering multiple sub values

    Hello, everyone,
    In my SSRS report, I need to set a multiple select parameter called Group, with values: group1 group2, etc....
    When group1 is selected, it needs to apply to data of certain sub groups: sub-group1, sub-group2;
    When group2 is selected, it needs to apply to data of different sub groups: sub-group3, sub-group4 and sub-group5;
    when both group1 and group2 are selected, then, it needs to apply to data of sub-group1 to sub-group5.
    I know how to do it when only one group is selected: simply use a case statement in the query to select the right sub groups based on the group selected.
    But I don't know a good way to do it when multiple groups are selected.
    Any help, pointers are much appreciated. Thanks in advance!
    Regards

    Hi QQFA,
    If I understand correctly, there are two parameters (Group and Sub_group) in the report. When we select group1 in Group parameter, it will auto select sub-group1, sub-group2 in the Sub_group parameter; when we select group2 in Group parameter, it will auto
    select sub-group3, sub-group4 and sub_group5 in the Sub_group parameter; when we select both all, it will auto select all sub_group values. If I have misunderstood, please don't hesitate to let me know.
    In this scenario, we can create a temporary table with Group and Sub_group columns, then select Sub_group column values based on the Group field. For more details, please see:
    Create a dataset with the query below:
    CREATE TABLE #temp([group] nvarchar(50),sub_group nvarchar(50))
    INSERT INTO #temp VALUES     ('group1','sub-group1'),('group1','sub-group2'),('group2','sub-group3'),('group2','sub-group4'),('group2','sub-group5')
    SELECT * FROM  #temp
    where [group]  in (@Group)
    Set available values and default values of Sub_group parameter with get values from the sub_group field in the new dataset.
    Note that the two parameters are all multiple parameters.
    If there are any misunderstanding, please elaborate the issue for further investigation.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Data template multiple selection problem

    Hi all,
    I have a problem with the Multiple Selection on the BI Publisher using data templates. One of my parameters is called p_application, this parameter is a integer/number and its values come from a list of values.
    I'm getting the error "....invalid number". I think the data template is not understanding that this parameter have multiple selection.
    Can you help me?
    here is my data template
    <dataTemplate name="user_reg" dataSourceRef="Thomson_Live_ EDC_Environment">
    <properties>
    <property name="include_parameters" value="false"/>
    <property name="include_null_Element" value="false"/>
    <property name="include_rowsettag" value="false"/>
    <property name="scalable_mode" value="on"/>
    <property name="db_fetch_size" value="20"/>
    <property name="scalable_mode" value="on"/>
    </properties>
    <parameters>
    <parameter name="p_customer" dataType="string" include_in_output="false"/>
    <parameter name="p_application" dataType="integer" include_in_output="false"/>
    <parameter name="p_start_date" dataType="date" include_in_output="false"/>
    <parameter name="p_final_date" dataType="date" include_in_output="false"/>
    <parameter name="p_staff_account" dataType="string" include_in_output="false"/>
    </parameters>
    <dataQuery>
    <sqlStatement name="Q1">
    <![CDATA[
    select COUNT(DISTINCT TRUNC(a.TIMESTAMP)) days_logged
    ,COUNT(a.USER_ID) logins
    ,max(a.TIMESTAMP) last_access
    ,a.application_id application_id
    ,a.user_id user_id
    from user_history_log a,
    idweb_user b,
    idweb_customer c
    where to_date(to_char(a.timestamp,'dd-mm-rrrr'),'dd-mm-rrrr') between to_date(:p_start_date,'dd-mm-rrrr') and to_date(:p_final_date,'dd-mm-rrrr')
    and a.user_id = b.user_id
    and b.customer_key = c.customer_key
    and c.staff_account = :p_staff_account
    and ('0' in (:p_customer) or b.customer_key in (:p_customer))
    and (0 in (:p_application) or a.application_id in (:p_application))
    group by a.application_id, a.user_id ]]>
    </sqlStatement>
    <sqlStatement name="Q2">
    <![CDATA[
    SELECT IDCU.CUSTOMER_NAME "Customer name"
    ,PCAP.APPLICATION_NAME "Application name"
    ,IDUS.FIRST_NAME "First name"
    ,IDUS.LAST_NAME "Last name"
    ,IDUS.USER_NAME "Username"
    ,IDUS.EMAIL_ADDRESS "Email address"
    ,IDUS.ROLE "Job Role"
    ,IDUS.AREA "Job Area"
    ,IDUS.DEPARTMENT "Specific Job Area"
    ,IDUS.CITY "City"
    ,IDUS.US_STATE "State"
    ,IDUS.COUNTRY "Country"
    ,SALE.TERRITORY_NAME "Territory/GAM"
    ,BUUN.BUSINESS_UNIT_NAME "SBU"
    ,to_char(IDUS.REGISTRATION_DATE,'dd-mm-yyyy') "Registration date"
    ,to_char(PCCA.EXPIRY_DATE,'dd-mm-yyyy') "Expiry date"
    ,DECODE(PCUA.DISABLED,'Y','Disabled','Enabled') "Status"
    ,pcua.application_id application_id
    ,pcua.user_id user_id
    FROM PC_USER_APPLICATION PCUA
    ,PC_CUSTOMER_APPLICATION PCCA
    ,IDWEB_USER IDUS
    ,IDWEB_CUSTOMER IDCU
    ,sales_territory SALE
    ,business_unit BUUN
    ,PC_APPLICATION PCAP
    WHERE BUUN.BUSINESS_UNIT_ID(+) = IDCU.SBU_ID
    AND SALE.TERRITORY_ID(+) = IDCU.TERRITORY_ID
    AND IDCU.CUSTOMER_KEY = IDUS.CUSTOMER_KEY
    AND IDUS.USER_ID = PCUA.USER_ID
    AND PCCA.CUSTOMER_KEY = IDCU.CUSTOMER_KEY
    AND PCCA.APPLICATION_ID = PCAP.APPLICATION_ID
    AND PCAP.APPLICATION_ID = PCUA.APPLICATION_ID
    AND NVL(IDUS.DISABLED,'N') = 'N'
    AND IDCU.STAFF_ACCOUNT = :p_staff_account
    AND ('0' in (:p_customer) or IDCU.CUSTOMER_KEY in (:p_customer))
    AND (0 in (:p_application) or pcap.application_id in (:p_application))
    ORDER BY IDCU.CUSTOMER_NAME, PCAP.APPLICATION_NAME, IDUS.USER_NAME ]]>
    </sqlStatement>
    <sqlStatement name="Q3">
    <![CDATA[
    select COUNT(a.TIMESTAMP) "Number of Turnaways Kickout",
    MAX(a.timestamp) "Last Turnaway Kickout",
    a.application_id,
    a.user_id
    from tpharma_user.user_refused a,
    idweb_user i
    where to_date(to_char(a.timestamp,'dd-mm-rrrr'),'dd-mm-rrrr') between to_date(:p_start_date,'dd-mm-rrrr') and to_date(:p_final_date,'dd-mm-rrrr')
    and (0 in (:p_application) or a.application_id in (:p_application))
    and a.user_id = i.user_id
    and ('0' in (:p_customer) or i.customer_key in (:p_customer))
    group by a.application_id, a.user_id ]]>
    </sqlStatement>
    <link name="ruser3" parentQuery="Q1" parentColumn="user_id" childQuery="Q3" childColumn="user_id(+)" condition="="/>
    <link name="rapp3" parentQuery="Q1" parentColumn="application_id" childQuery="Q3" childColumn="application_id(+)" condition="="/>
    <link name="ruser1" parentQuery="Q1" parentColumn="user_id" childQuery="Q2" childColumn="user_id" condition="="/>
    <link name="rapp1" parentQuery="Q1" parentColumn="application_id" childQuery="Q2" childColumn="application_id" condition="="/>
    </dataQuery>
    <dataStructure>
    <group name="G_totals1" source="Q1">
    <element name="days_logged" value="days_logged"/>
    <element name="logins" value="logins"/>
    <element name="last_access" value="last_access"/>
    <element name="application_id" value="application_id"/>
    <element name="user_id" value="user_id"/>
    </group>
    <group name="G_main" source="Q2">
    <element name="Customer name" value="Customer name">
    <element name="Application name" value="Application name">
    <element name="First name" value="First name">
    <element name="Last name" value="Last name">
    <element name="Username" value="Username">
    <element name="Email address" value="Email address">
    <element name="Job Role" value="Job Role">
    <element name="Job Area" value="Job Area">
    <element name="Specific Job Area" value="Specific Job Area">
    <element name="City" value="City">
    <element name="State" value="State">
    <element name="Country" value="Country">
    <element name="Territory/GAM" value="Territory/GAM">
    <element name="SBU" value="SBU">
    <element name="Registration date" value="Registration date">
    <element name="Expiry date" value="Expiry date">
    <element name="Status" value="Status">
    <element name="application_id" value="application_id"/>
    <element name="user_id" value="user_id"/>
    </group>
    <group name="G_main" source="Q3">
    <element name="Number of Turnaways Kickout" value="Number of Turnaways Kickout"/>
    <element name="Last Turnaway Kickout" value="Last Turnaway Kickout"/>
    <element name="application_id" value="application_id"/>
    <element name="user_id" value="user_id"/>
    </group>
    </dataStructure>
    </dataTemplate>
    on the XDO file, the parameters are:
    <parameters>
    <parameter id="p_customer" defaultValue="8c3ff6ad5eh5c8" dataType="xsd:string">
    <select label="Customer: " valueSet="lv_customer" multiple="true" all="false" allValue="lov"/>
    </parameter>
    <parameter id="p_application" defaultValue="1" dataType="xsd:integer">
    <select label="Application: " valueSet="LV_application" multiple="true" all="false" allValue="lov"/>
    </parameter>
    <parameter id="p_start_date" defaultValue="{$SYSDATE()$}" dataType="xsd:date">
    <date label="Usage occurs on or after (dd-mm-yyyy):" size="11" format="dd-MM-yyyy" minValue="01-06-1950" maxValue="01-06-2100"/>
    </parameter>
    <parameter id="p_final_date" defaultValue="{$SYSDATE()$}" dataType="xsd:date">
    <date label="Usage occurs on or before (dd-mm-yyyy):" size="11" format="dd-MM-yyyy" minValue="01-06-1950" maxValue="01-06-2100"/>
    </parameter>
    <parameter id="p_staff_account" defaultValue="Y">
    <select label="Staff Accout: " valueSet="lv_staff_account" multiple="false" all="false" allValue="null"/>
    </parameter>
    </parameters>
    Thank you,
    Marcelo Cure
    Oracle Developer
    [email protected]
    www.ilegra.com
    Edited by: user11307652 on 09/03/2010 05:21
    Edited by: user11307652 on 09/03/2010 06:15

    I have a similar problem where i cannot use the parameter with comma separated values in the parameter.
    my report definition is as below.
    <dataTemplate name="COMLTRDATA" description="Data for the COMLTR letters" dataSourceRef="PRISM">
                        <parameters>
                             <parameter name="secondary_sequence" dataType="number" include_in_output="false"/>
                        </parameters>
                        <dataQuery>
                             <sqlStatement name="Q1">
                                  <![CDATA[select     PR_LETTER_MASTER.LETTER_ID as LETTER_ID,
         to_char(PR_LETTER_MASTER.LETTER_DATE,'FMMonth DD, RRRR') as LETTER_DATE,
         PR_LETTER_MASTER.LETTER_NAME as LETTER_NAME,
         PR_LETTER_MASTER.ADDRESS_TYPE as ADDRESS_TYPE,
         PR_LETTER_MASTER.REVIEWED_FIRM_NUMBER as REVIEWED_FIRM_NUMBER,
         PR_LETTER_MASTER.REVIEWED_FIRM_NAME as REVIEWED_FIRM_NAME,
         PR_LETTER_MASTER.REVIEWED_FIRM_TYPE as REVIEWED_FIRM_TYPE,
         PR_LETTER_MASTER.REVIEWING_FIRM_NUMBER as REVIEWING_FIRM_NUMBER,
         PR_LETTER_MASTER.REVIEW_NUMBER as REVIEW_NUMBER,
             PR_LETTER_MASTER.SALUTATION as SALUTATION,
             PR_LETTER_MASTER.SIGNATURE_EMAIL_ID as SIGNATURE_EMAIL_ID,
             PR_LETTER_MASTER.SIGNATURE_TITLE as SIGNATURE_TITLE,
         PR_LETTER_MASTER.REVIEW_STATUS as REVIEW_STATUS,
         to_char(PR_LETTER_MASTER.REVIEW_COMMENCEMENT_DATE,'FMMonth DD, RRRR') as REVIEW_COMMENCEMENT_DATE,
         to_char(PR_LETTER_MASTER.REVIEW_DUE_DATE,'FMMonth DD, RRRR') as REVIEW_DUE_DATE,
         PR_LETTER_MASTER.REVIEW_YEAR as REVIEW_YEAR,
         PR_LETTER_MASTER.REVIEW_PROGRAM as REVIEW_PROGRAM,
             PR_LETTER_MASTER.REVIEW_TYPE as REVIEW_TYPE,
             PR_LETTER_MASTER.TEAM_CAPT_FIRM_NAME as TEAM_CAPT_FIRM_NAME,
         PR_LETTER_MASTER.PRIOR_REVIEW_NUMBER as PRIOR_REVIEW_NUMBER,
         PR_LETTER_MASTER.MNGPTR_MEMBER_NUMBER as MNGPTR_MEMBER_NUMBER,
         PR_LETTER_MASTER.FIRST_NAME as FIRST_NAME,
         PR_LETTER_MASTER.MIDDLE_INITIAL as MIDDLE_INITIAL,
         PR_LETTER_MASTER.LAST_NAME as LAST_NAME,
         PR_LETTER_MASTER.ADDRESS_LINE1 as ADDRESS_LINE1,
         PR_LETTER_MASTER.ADDRESS_LINE2 as ADDRESS_LINE2,
         PR_LETTER_MASTER.ADDRESS_LINE3 as ADDRESS_LINE3,
         PR_LETTER_MASTER.CITY as CITY,
         PR_LETTER_MASTER.STATE as STATE,
         PR_LETTER_MASTER.ZIP as ZIP,
         PR_LETTER_MASTER.ZIP_PLUS as ZIP_PLUS,
         PR_LETTER_MASTER.DELIVERY_EMAIL_ID as DELIVERY_EMAIL_ID,
         PR_LETTER_MASTER.SIGNATURE_TYPE as SIGNATURE_TYPE,
         PR_LETTER_MASTER.SIGNATURE_NAME as SIGNATURE_NAME,
         PR_LETTER_MASTER.TEAM_CAPT_MEMBER_NUMBER as TEAM_CAPT_MEMBER_NUMBER,
         PR_LETTER_MASTER.SIGNATURE_PHONE_NUMBER as SIGNATURE_PHONE_NUMBER,
         PR_LETTER_MASTER.LAST_LETTER_SENT_DATE1 as LAST_LETTER_SENT_DATE1,
         PR_LETTER_MASTER.LAST_LETTER_SENT_DATE2 as LAST_LETTER_SENT_DATE2,
         PR_LETTER_MASTER.LAST_LETTER_SENT_DATE3 as LAST_LETTER_SENT_DATE3,
        to_char(PR_LETTER_MASTER.EXIT_CONFERENCE_DATE,'FMMonth DD, RRRR') as EXIT_CONFERENCE_DATE,
         PR_LETTER_MASTER.REVIEW_TAX_SEASON as REVIEW_TAX_SEASON,
             PR_LETTER_MASTER.STATE_SOCIETY_NUM as STATE_SOCIETY_NUM,
             PR_LETTER_MASTER.STATE_SOCIETY_NAME as STATE_SOCIETY_NAME,
         PR_LETTER_MASTER.SECONDARY_LETTER_SEQUENCE as SECONDARY_LETTER_SEQUENCE,
         PR_LETTER_MASTER.CREATION_DATE as CREATION_DATE,
         PR_LETTER_MASTER.STATE_CODE as STATE_CODE ,
             PR_LETTER_MASTER.DELIVERY_EMAIL_ID as DELIVERY_EMAIL_ID,
             PR_LETTER_MASTER.TEAM_CAPT_FIRST_NAME as TEAM_CAPT_FIRST_NAME,
             PR_LETTER_MASTER.TEAM_CAPT_LAST_NAME as TEAM_CAPT_LAST_NAME,
             to_char(PR_LETTER_MASTER.DT_RAB_PRESENTATION,'FMMonth DD, RRRR') as DT_RAB_PRESENTATION,
             PR_LETTER_MASTER.RAB_DESCRIPTION as RAB_DESCRIPTION ,
             PR_LETTER_MASTER.TEAM_CAPT_MIDDLE_INITIAL as TEAM_CAPT_MIDDLE_INITIAL,
    pr_letter_master.salutation as Salutation
    from      PRISM.PR_LETTER_MASTER PR_LETTER_MASTER
    where secondary_letter_sequence in (:secondary_sequence)]]>
                             </sqlStatement>
                             <sqlStatement name="Q2">
                                  <![CDATA[select followup_description from pr_letter_details where secondary_letter_sequence = :SECONDARY_LETTER_SEQUENCE]]>
                             </sqlStatement>
                        </dataQuery>
                        <dataStructure>
                             <group name="letter1" source="Q1">
                                  <element name="LETTER_DATE" value="LETTER_DATE"/>
                                  <element name="FIRST_NAME" value="FIRST_NAME"/>
                                  <element name="MIDDLE_INITIAL" value="MIDDLE_INITIAL"/>
                                  <element name="LAST_NAME" value="LAST_NAME"/>
                                  <element name="ADDRESS_LINE1" value="ADDRESS_LINE1"/>
                                  <element name="ADDRESS_LINE2" value="ADDRESS_LINE2"/>
                                  <element name="ADDRESS_LINE3" value="ADDRESS_LINE3"/>
                                  <element name="CITY" value="CITY"/>
                                  <element name="STATE" value="STATE"/>
                                  <element name="ZIP" value="ZIP"/>
                                  <element name="ZIP_PLUS" value="ZIP_PLUS"/>
                                  <element name="SALUTATION" value="SALUTATION"/>
                                  <element name="REVIEW_TYPE" value="REVIEW_TYPE"/>
                                  <element name="DT_RAB_PRESENTATION" value="DT_RAB_PRESENTATION"/>
                                  <element name="RAB_DESCRIPTION" value="RAB_DESCRIPTION"/>
                                  <element name="SIGNATURE_NAME" value="SIGNATURE_NAME"/>
                                  <element name="SIGNATURE_PHONE_NUMBER" value="SIGNATURE_PHONE_NUMBER"/>
                                  <element name="SIGNATURE_TITLE" value="SIGNATURE_TITLE"/>
                                  <element name="SIGNATURE_EMAIL_ID" value="SIGNATURE_EMAIL_ID"/>
                                  <element name="TEAM_CAPT_MIDDLE_INITIAL" value="TEAM_CAPT_MIDDLE_INITIAL"/>
                                  <element name="TEAM_CAPT_FIRST_NAME" value="TEAM_CAPT_FIRST_NAME"/>
                                  <element name="TEAM_CAPT_LAST_NAME" value="TEAM_CAPT_LAST_NAME"/>
                                  <element name="REVIEWED_FIRM_NUMBER" value="REVIEWED_FIRM_NUMBER"/>
                                  <element name="REVIEWED_FIRM_NAME" value="REVIEWED_FIRM_NAME"/>
                                  <element name="REVIEW_NUMBER" value="REVIEW_NUMBER"/>
                                  <element name="LETTER_ID" value="LETTER_ID"/>
                                  <group name="Detail" source="Q2">
                                       <element name="followup_description" value="followup_description"/>
                                  </group>
                             </group>
                        </dataStructure>
                   </dataTemplate>

  • COPA Report: Multiple selection

    Hi Gurus,
    I want to have a profit center as a multiple selection to be given as an input in KE30 report. That means user should be able to execute the report based on the selection of the profit center in the entry screen
    For the same I created a global variable and following are the details fo the same
    Appl. class        KE
    Type of variable           Characteristics Value
    Variable Name            &PCT
    Field Name                PRCTR
    Replacement type      Entry
    Optional entry           Optional entry
    Parameter/selectopt. Select option
    Short text                  Profit Ctr
    Description               Profit Center
    Text                         Profit Center
    I have created Form for the report based on the line item (Tcode KE94). If I want to use this global variable "&PCT" in the "General Data selection" tab  in the Form,the characteristic Profit center is not available for selection from the field catlog. Profit center is one of the characteristic in the operating concern.But this is available for the Navigation in KE30 report. I deselected Profit center from the Nevigation in KE32 but still I am not able to make it available for selection in "General data Selection" tab in Form.
    What is the relevance of Variable On/OFF in KE30 report? How to make this Global variable available to be used in "General data selection" tab in the Form?
    Will you please help me out?
    regards,
    makrand

    Dear Makrand,
    Please look into the following:
    I brought profit center in selection criterion:
    For this I have changed my Form T Code:  KE35:
    General Data Selection :
    Included Profit center along with the controlling Area.
    Then I changed my report:
    KE30:
    Variables Tab:
    Givn Profit center as entry at execution.
    Hope this will helps you......
    Regards,
    Pavan Kumar Arvapally

  • How to display F4 check list where can be multiple selection ?

    Hi exports,
    Using Function module "HELP_VALUES_GET_WITH_TABLE",  is it possible to list a multiple selection value ?
    Thank you very much.
    Best regards,
    Sap leaner

    Hi
    See this and use
    For F4 Values on Screen:
    PROCESS ON VALUE_REQUEST
    using module call starting with FIELD i.e FIELD field MODULE module
    There are number of function modules that can be used for the purpose, but these
    can fullfill the task easily or combination of them.
    DYNP_VALUE_READ
    F4IF_FIELD_VALUE_REQUEST
    F4IF_INT_TABLE_VALUE_REQUEST
    POPUP_WITH_TABLE_DISPLAY
    DYNP_VALUE_READ
    This function module is used to read values in the screen fields. Use of this
    FM causes forced transfer of data from screen fields to ABAP fields.
    There are 3 exporting parameters
    DYNAME = program name = SY-CPROG
    DYNUMB = Screen number = SY-DYNNR
    TRANSLATE_TO_UPPER = 'X'
    and one importing TABLE parameter
    DYNPFIELDS = Table of TYPE DYNPREAD
    The DYNPFIELDS parameter is used to pass internal table of type DYNPREAD
    to this FM and the values read from the screen will be stored in this table.This
    table consists of two fields:
    FIELDNAME : Used to pass the name of screen field for which the value is to
    be read.
    FIELDVALUE : Used to read the value of the field in the screen.
    e.g.
    DATA: SCREEN_VALUES TYPE TABLE OF DYNPREAD ,
    SCREEN_VALUE LIKE LINE OF SCREEN_VALUES.
    SCREEN_VALUE-FIELDNAME = 'KUNNR' . * Field to be read
    APPEND SCREEN_VALUE TO SCREEN_VALUES. * Fill the table
    CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
    DYNAME = SY-CPROG
    DYNUMB = SY-DYNNR
    TRANSLATE_TO_UPPER = 'X'
    TABLES
    DYNPFIELDS = SCREEN_VALUES.
    READ TABLE SCREEN_VALUES INDEX 1 INTO SCREEN_VALUE.Now the screen value for field KUNNR is in the SCREEN_VALUE-FIELDVALUE and can be used for further processing like using it to fill the internal table to be used as parameter in F4IF_INT_TABLE_VALUE_REQUEST ETC.
    F4IF_FIELD_VALUE_REQUEST
    This FM is used to display value help or input from ABAP dictionary.We have to pass the name of the structure or table(TABNAME) along with the field name(FIELDNAME) . The selection can be returned to the specified screen field if three
    parameters DYNPNR,DYNPPROG,DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
    CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
    TABNAME = table/structure
    FIELDNAME = 'field name'
    DYNPPROG = SY-CPROG
    DYNPNR = SY-DYNR
    DYNPROFIELD = 'screen field'
    IMPORTING
    RETURN_TAB = table of type DYNPREAD
    F4IF_INT_TABLE_VALUE_REQUEST
    This FM is used to dsiplay values stored in an internal table as input
    help.This FM is used to program our own custom help if no such input help
    exists in ABAP dictionary for a particular field. The parameter VALUE_TAB is used to pass the internal table containing input values.The parameter RETFIELD
    is used to specify the internal table field whose value will be returned to the screen field or RETURN_TAB.
    If DYNPNR,DYNPPROG and DYNPROFIELD are specified than the user selection is passed to the screen field specified in the DYNPROFIELD. If RETURN_TAB is specified the selectionis returned in a table.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    RETFIELD = field from int table whose value will be returned
    DYNPPROG = SY-CPROG
    DYNPNR = SY-DYNNR
    DYNPROFIELD = 'screen field'
    VALUE_ORG = 'S'
    TABLES
    VALUE_TAB = internal table whose values will be shown.
    RETURN_TAB = internal table of type DDSHRETVAL
    EXCEPTIONS
    parameter_error = 1
    no_values_found = 2
    others = 3.
    POPUP_WITH_TABLE_DISPLAY
    This FM is used to display the contents of an internal table in a popup window.The user can select a row and the index of that is returned in the CHOISE
    parameter.The VALUETAB is used to pass the internal table.
    A suitable title can be set using TITLETEXT parameter. The starting and end position of the popup can be specified by the parameters STARTPOS_COL / ROW and ENDPOS_ROW / COL .
    CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
    EXPORTING
    ENDPOS_COL =
    ENDPOS_ROW =
    STARTPOS_COL =
    STARTPOS_ROW =
    TITLETEXT = 'title text'
    IMPORTING
    CHOISE =
    TABLES
    VALUETAB =
    EXCEPTIONS
    BREAK_OFF = 1
    OTHERS = 2.
    e.g.
    DATA: w_choice TYPE SY-TABIX.
    DATA: BEGIN OF i_values OCCURS 0 WITH HEADER LINE,
    values TYPE I,
    END OF i_values.
    PARAMETRS : id TYPE I.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR id
    i_values-values = '0001'.
    APPEND i_values.
    i_values-values = '0002'.
    APPEND i_values.
    i_values-values = '0003'.
    APPEND i_values.
    i_values-values = '0004'.
    APPEND i_values.
    CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
    EXPORTING
    ENDPOS_COL = 40
    ENDPOS_ROW = 12
    STARTPOS_COL = 20
    STARTPOS_ROW = 5
    TITLETEXT = 'Select an ID'
    IMPORTING
    CHOISE = w_choice
    TABLES
    VALUETAB = i_values
    EXCEPTIONS
    BREAK_OFF = 1
    OTHERS = 2.
    CHECK w_choice > 0.
    READ TABLE i_values INDEX w_choice....now we can process the selection as it is contained
    ...in the structure i_values.
    Other FM that may be used to provide input help is HELP_START .
    Reward points if useful
    Regards
    Anji

Maybe you are looking for