Multiple selection of sales areas in BP transaction

Hi,
In the creation mode of BP for sold-to party, while selecting sales areas, the standard ALV popup does NOT allow multiple selection/maintainance of sales areas.
Is there an option for multiple maintainance of sales areas. It's time consuming to maintain sales areas for each BP manually.
Also, is there an API/method to maintain sales area data for BP?
Thanks
Kamal

Hi Kamal,
   You can use followinf function module to update sales area data:
BAPI_BUPA_FRG0020_ADD : For shipping tab
BAPI_BUPA_FRG0030_ADD : For billing tab
BAPI_BUPA_FRG0140_ADD : For organization data tab.
Hope this will help you.
Thanks
Swagatika

Similar Messages

  • Sales Area assignment to Transaction Type.

    Dear all,
    We are using SAP CRM 5.0and am in the process of rolling out CRM Sales to a new Company of us.
    I have defined the Organization Management in C21 System and completed the Assignment of Sales Area to the Transaction Types in Development landscape.
    Now i need to move the settings to QA landscape.
    As the assignment of Sales area is a transportable object, i transported the same to QA landscape but the organization number ranges which has been created in QA landscape are different,
    how do you I bring same Organization Number to QA landscape from Development as it is not a transportable object?
    It is the only way to Change the system settings in SCC4 and change the settings manually.
    Kindly give me your inputs how to go ahead.
    Satish

    Hi,
       Check if the following thread helps.
    [Transport Org Structure;
    [Transport of Organization Structure;
    [Transport Org Structure;
    Regards,
    Arun Prakash
    Edited by: Arun Prakash Karuppanan on May 11, 2010 3:38 PM

  • Multiple Selection of Purchase Order in MIGO Transaction

    Hi All,
    We are in 4.7 and client has a requirement where in the MIGO transaction they can select multiple PO in the first screen in one go and see all the corresponding line items. Standard way is that you can select one PO at a time.
    Is there any way by which we can change the option from single to multiple.
    Regards,
    Jayant

    Hello Friend,
    there is no way to change the selection to accept multiple entries of PO...
    we have this scenario before...and one developer change that to select-option to cater that requirement....
    and after that it was mess...it was required to change lot of standard function module and we dropped that idea...
    if customer insists, i would suggest make a simple custom program which would have required selection-screen...and in that either you can have recording or a standard BAPI....
    thanks
    Krish

  • Multiple selection of WBS  for CJIC Transaction

    Hi,
    Any one please can you let me know is there any way for Multiple selection of WBS elements in CJIC Transaction.I implemented Note 635711, but it is adding field at Additional Selection not in Selection screen. Even the output iam getting is different from Selection screen WBS element.
    Waiting for your responses.
    Thanks,
    Anitha A

    hi
    Check this link it might give hint, same you can try in wd java.
    http://www.roseindia.net/jsp/file_upload/uploadingMultipleFiles.shtml
    As in above code separate file up-loader is used for each file.
    I know you might be looking;like lotus or outlook copy all attachment is such a way.
    Edited by: Yogesh Galphade on Mar 22, 2011 7:51 PM

  • Sales Office as part of Sales Area

    Hi SD Guru
    I have 2 Questions
    1. We have Sales Office and it is mandaotry in SO creation. We want if defined Sales Office in Customer Master is matched with SO entry Sales Office then ONLY system should allow creation of sale order on that customer. Else it should NOT.
    In short we want Sales Office as part of Sales Area.
    How to achive this.
    2. After entring one SO, system do not come back to the screen where, we need to reselect detail Sales Area. It rather presume that user want to continue with the earlier selected sales area and screen starts from S-T-P. We want system should come back to the Sales Area Selection.
    Hope I am clear on requriements.
    Thanks & Regards
    Sunill.

    Hi
    You should not enter the sales area+sales office at the start of the transaction, rather enter just the sales document type.
    When you enter the Sold-to party, the sytems asks you to select the sales area (if several exist for customer), then you select the sales  area you want. You can copy the customer sales office by an user exit USEREXIT_MOVE_FIELD_TO_VBAK.
    You question 2 should be answered if you start as explained here above.
    Regards
    Sidi

  • Sales Area Determination

    Hi Experts
    While creating Service Contract system ask the selection of sales area even though i maintained in customer master
    it should determined through sales area
    is their any thing i am missing in config
    Regards
    Raju

    You have to select org determination profile, in which you would define org determination rule; you can try using rule:10000144 (Sales areas incl. master data) for your purpose. You then attach this org determination profile to transaction type.
    However during the creation of order in GUI you have to manually select in the orgisation tab  the sales area for which the order is relevant. But when creating order in portal sales area relevant based on your selection of webshop/xcm scenario organisation tab details would fill up on their own.
    Regards
    Medha Jaitley

  • No valid sales area Error while creating orders

    Hi,
    I am having another issue in my system. When i am trying to create a any sales transaction and enter the sold-to/transaction type i am getting error saying 'no valid sales area for the BP'. But for this same BP i am able to see the sales area in the BP tile set. WHen i click on the dropdown to select the sales area it is empty. I am not seeing any sales area inf the sales area pop-up box. Did i miss anything related to sales org download from CRM to CDB? I will keep checking.
    Please let me know if i am missing anything.
    Thanks,
    Karuna.

    Hi Wolfhard,
    You are correct. For the employees in SMOMITABT i do not have sales area in SMOMITAREA?
    What i did is i added these employees in PPOMA_CRM and did a delta uding CRMD_DOWNLOAD_OM. But this did not get any data to SMOMITAREA.
    I also tried adding ORG in SMOEAC itself but that did not help either. Do you have any suggestions?
    Thanks you,
    Karuna.

  • Charts by Sales Area

    Dear Gurus,
    I have a problem in visual composer.
    I have created a model that has a selection list (sales area) and 2 charts.
    Initially the charts shows the total sales per month.
    But my requirement is to select (double click) different sales area from the list and get the corresponding charts (by sales area).
    The problem here is when I double click any particular sales area the charts don't get changed. They keep on showing the total results.
    Please reply me ASAP.
    Thanks, Akash

    Thanks Basheer for your reply.
    I did actually fix that problem before.
    But now I have another problem.
    If you give me some idea ??
    The selection table is now working fine, but I can't see the charts for the Total value.
    I mean by default it selects the first row and shows the charts for its value.
    But I want the initial screen to show me the charts for TOTAL value for all Sales Area.
    How that can be done.
    Please let me know if I'm not clear.
    Thanks.

  • Multiple Selection multi-line per choice

    I have a bunch of multiple selection items which are all the same, so I copied and pasted them where I wanted them. The pasted ones are taking up two to three lines per choice (one word per line) even though they are very short and the original that I copied from only takes one line each. Does this mean I have to do each one manually? Why are the copied ones different from the original? Thanks!

    Hi,
    It sounds like a bug, since this shouldn't be happening.  However I tried to reproduce the problem, but couldn't.  It's probably a bug, that specific to your choices labels.  Could you share your form to me ([email protected]), so I can take a look at the specifics?  Once I can see it, I can provide some guidance about the issue and how to work around it (if posisble) until we've fixed it.  You can share a form by clicking the share button, and then clicking add collaborators.
    Thanks,
    Todd

  • [CRMC_R3_ORG_GENERATE] Cannot generate Sales Areas

    HI CRM experts,
    Can you please help us with this problem? We are trying to generate 11 Sales Areas from R3 to CRM using txn CRMC_R3_ORG_GENERATE. 6 of them were generated successfully but the other 5 were not and has a red icon under Generated column.
    Can you please let us know what to check or how to correct this problem?
    Hoping for your kind assistance. Thanks!
    Best regards,
    Mike

    Hi Experts,
    I think i know the cause of this issue. hope you can help me figure out the solution.
    From what i understand, the logic of this CRMC_R3_ORG_GENERATE is that it checks the R/3 sites in SMOEAC and it selects one ECC system (not sure if it's alphabetically or by date of creation) and displays the sales areas maintained in that ECC system.  THe problem is that the CRM system is connected to several ECC systems and i want it to select the sales area from another ECC system, not the one it is currently pulling from.
    Do you know how to debug/change the ECC system it pulls sales area data from?
    Thanks. Appreciate all your help.
    Regards,
    Katrina

  • New Sales Area Missing

    Hi,
    We have set up a new Sales Org in our R/3 sysyem.
    The org structure and Company has transferred across to CRM from R/3.
    However when we create a Sold-to Party and select a Sales Area to cfreate this sold-to party in, the new sales org does not appear.
    Can anyone tell me what needs to be done to make this new sales area appear in the list so a Sold-to party can be maintained in it?
    Many Thanks
    David

    Hi
    Paul don't feel jealous  behave like a professional when you are unable to answer the threads that doesn't mean that no body can answer it, I have more than 6 years of Exp in Siebel CRM and and SAP crm, i don't have any necessity to get points it's may be u r focus getting points that's why you are worrying more than others  but not my focus is to share my ideas in SDN mean while if iam getting points means it's a diffrent issue, CRm new users SDn can rise any  doubts which they are having
    IT is possible to Answer the threads Immidiately after questioning By Selecting ''QUESTIONS WITH NO REPLY ONLY"" and when you are waiting for the threads by selecting this options as soon as user's rise a thread you can answer''
    i think there is nothing wrong in answering questions when sitting ideally, remeber that yesterday iam at my work place till late night
    i was answering the questions, and the people  who are in Production Support, will login genrally night times , If you still have any Objections you can go to SDN and Report they will decide whose Id is to keep and whose to delete. Feeling jealous about others is not a Good practice and Not Professional

  • Customer Master Record :Sales area INSO IN IN is not defined for customer

    Hi Experts
    I got error , when creating Customer Master Record .The error message likes below
    "Sales area INSO IN IN is not defined for customers" .I maintained all the settings .But why i am getting again and again the same error .Even i checkd in TVTA table in SM30 but is shows clear data , please tell me where i made mistake .
    I traid so many times maintain with new configuration ,but still field .Please what i have to done to over coome this issue .
    Your Suggestions needful to me .. Please
    Issue Details :
    Message no. F2644
    Diagnosis
    The sales area specified has either not been defined (i.e. there is no entry in table TVTA) or it refers to another sales area for customers (customer division/customer distribution channel in the TVTA detail screen). This means that the customer master data of the sales area entered correspond to the data in the reference sales area and customer master data only needs to be maintained for this reference sales area.
    Procedure
    You can display the relevant and therefore valid sales areas for customers by selecting "Extras" -> "Sales areas" -> "All areas".
    Regards
    Rajesh .P

    Maintain relevant entries in t.code VOR1 and VOR2 and then try again. Here assign the distribution channels and divisions to reference distribution channel and division.

  • Sales area pop up appears again inspite of giving the sales area.

    Hi Friends,
    Could you please let me know why the sales area pop up appears with the options when i enter sold to party in sales order creation. I already gave the sales area details with sales org, dist channel and division along with document type during order entry. The sold to party exists in two sales areas and both the areas are displayed under pop up.
    What could be the reason for this behaviour.
    Thanks

    Hi,
    As your sold-to-party exists in two sales areas,if you don't maintain the sales area in the initial screen,after entering this sold-to-party you will get a pop-up asking you to select the sales area.It is the standard procedure.
    If you maintain the sales area in the initial screen,and if you enter the sold-to-party then the details of the sold-to-party in that sales area will be taken into consideration without any pop-up.
    I wondered that you are getting a pop-up even though you have maintained the sales area in the initial screen.
    Please ask your ABAPer to debug and check the error.I think it is the error in screens.
    Regards,
    Krishna.

  • Sales Area Fields Mandatory Dialog Box not coming up

    Hello Forum,
    We have the Business Partner PCUI Application - CRMM_ACCOUNT, where in, there are mandatory fields made under Tab General Information and Sales Area. We have done the necessary changes in field grp settings and generated the layouts. for relevant field groups.
    When we create New Business Partner, the control is on the 'General Information' TAB. PCUI doesnot allow to save the business partner, unless, mandatory fields are filled out. It gves a Javascript Popup to fill the mandatory fields.
    But the same is not the case with Sales Area Tab, When we select Sales Area (Either by using Template Functionality or Selecting the Sales Area Manually), the fields in this TAB strangely remain in Readable Format only. No Changes are allowed to be incorporated. In this case there is no dialog box prompting for filling the mandatory fields. Also, it allows to save business partner w/o filling the sales area data mandatory fields.
    However, when we save, Change The Tabs (I.e. Goto General Information and come back to Sales Area Data, it sometimes enables the fields for Entry under Sales Area). And then it starts doing the mandatory field check in Sales Area Tab.
    Request, if anybody can provide, clues for this behaviour and resolution.
    Regards
    Tushar Kansara

    you must modify '''browser.chrome.toolbar_tips'''
    type in the address bar '''about:config'''
    then press the button''' i'll be careful i promise'''
    then type in the bar '''browser.chrome.toolbar_tips'''
    then '''Double-click''' on it, to make it''' false'''
    exit firefox and restart-it.
    See for more info : [http://kb.mozillazine.org/Browser.chrome.toolbar_tips Browser.chrome.toolbar tips ]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Need to hide organization tab base on particular "Sales Area"

    Hello Ecperts,
    There is a requirement :
    I need to hide a tab in BP screen when I select a particular sales area(Sales organization,Distribution channel and Division).
    For ex: When I select a sales area : 0002/18/02 , the organization tab should be invisible.
    please help me with the right solution.
    thanks

    HI,
    Lets say your first screen is screen 100 and your second screen ( with table control ) is screen 200.
    Now in screen 200 attributes tab, set the screen type as Sub screen ( Note that sub screens do not have OK_CODE. The ok_CODE will get populated in the main Screen in which this is called. )
    Now create another Sub screen 300 with nothing in it. And use the resize option ( using cursor ) to minimize the screen size to the least possible size.
    Now create a screen 400. In this screen place a sub screen area ( choose it from the left side screen elements options  ) and giv it a name , say SUB.
    In the flow logic of this screen, write ...
    CALL SUBSCREEN sub INCLUDING sy-repid w_dynnr
    In PBO module ( before the call subscreen statement ) write
    If { your condition to display the table control )
    w_dynnr = 200.
    else.
    w_dynnr = 400.
    endif.
    Please get back with any further queries.
    Regards,
    Suzie

Maybe you are looking for