PDF Distribution Limitations with new EULA?

We have created Interactive PDFs for our customers to use and distribute among their teams. No data from these PDFs are coming back to us. Is someone on this forum able to verify that we are not violating the new EULA 500 limit?
After being on hold for 51 minutes and counting to try and speak with someone at Adobe, I have been reading the Community Responses. I believe this is an important distinction so I am adding it here: We have enabled Reader Extensions on our Interactive PDFs.
Thanks!

Yes you are in compliance.
Thanks & Regards,
Support Associate | Adobe Systems
Sent: Wednesday, December 04, 2013 10:17 PM
Subject: Re: Adobe Information on EULA
To confirm, we are a Publisher. We are selling the form, not the software, to the customer. They will then distribute to their students who will fill out the forms and reply back to the teachers. We will not see or collect any of the data in the forms.
We are still in compliance, correct?
Date: Wednesday, December 4, 2013 11:44 AM
Subject: Adobe Information on EULA
As discussed I would like to inform you that you are using the Adobe forms and your students are replying back to those forms. Since you are not distributing the software to any third party hence not breaking any Eula.
Thanks & Regards,
Support Associate | Adobe Systems

Similar Messages

Where are my books!? Sync-ed iTunes 10.6.3.25 on Win7 with new iPad3 WiFi/3G and iTunes shows (on my PC) that I have 590 "ebooks" (PDF's

Not to repaet myself, but... where are my ebooks?
I sync-ed iTunes 10.6.3.25 on Win7 with new iPad3 WiFi/3G and iTunes shows (on my PC) that I have 590 "ebooks" (PDF's & a few epub's) on my iPad, but for the life of me I can't seem to get to them on the iPad3 itself. If I open iTunes on the iPad3 it only shows a bland grey screen with a link to the "iTunes Stores Terms and Conditions…"? And my iBooks is empty, so is Acrobat Reader which I installed?
What gives? Gulp… help!?

That is troubling!
I downloaded the Kindle app on my iPad1 tonight, logged into my Amazon.com account and was able to download the books I had bought on my Kindle to my iPad! I am a VERY HAPPY CAMPER!

Xfdf and pdf works in Adobe Reader 6, but not with new versions 7, 8, X

I have a xfdf file which is created by querying a SQL data base and contains data for a pdf form; it works with Adobe Reader 6, but does not work with new versions of Adobe Readers (7, 8, 9 and X).
It is an intranet site running IIS 6.0 in Windows Server 2003 Web Edition SP2 with Adobe 6 installed and client systems include XPSP2, XPSP3, Vista, Windows 7 with different versions of IE, Firefox.
With new versions of Adobe Reader, click on the hyperlink launched the pdf form in a browser window without data; below is the link:
        // create shipping slip hyperlink
        string strLtrSlipUrl = "~/Archive/LtrShipSlip.pdf#FDF=" + lblWO.Text + "LtrShipSlip" + ".xfdf";
        HyperLink hlLtrShipPdf = new HyperLink();
        hlLtrShipPdf.Text = "Ltr Shipping Slip";
        hlLtrShipPdf.NavigateUrl = strLtrSlipUrl;
        hlLtrShipPdf.Target = "_blank";
        pnlLtrShipSlip.Controls.Add(hlLtrShipPdf);
I have installed new versions of Adobe Reader in the Web server (to match what the clients are using), but results are the same – blank pdf.
I uninstalled the new versions and installed version 6 and the pdf and xfdf worked happily together, but we need new versions of Adobe Reader in the client computers.
Thanks for helps and suggestions – I have read articles about using iTextSharp to create pdf documents from .NET apps, but that would be my last choice.

Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.

Wrong warning? to open with Reader (9.3.x or higher) "This PDF form requires a newer version of ..."

Hello
I have a problem with my form, when opened with Adobe Reader Version 9.3.0.148 (included) or higher Reader systematically shows the annoying message "This PDF form requires a newer version of Adobe Reader ...".
I work with 3 versions of each form:
1) Dynamic PDF Form XDP: Generated with Adobe Designer ES 8.2, (target version "Acrobat and Adobe Reader 8.0 or later. "
XDP form has no "Warings"
XFA-Template:
2) PDF Form, generated from the XDP form of point 1), using Adobe LC Forms ES2 "renderXDPForm" method.
3) Flatten PDF, generated from the PDF form, resulting in point 2) value, using Adobe LC Assembler ES2.
DDX:
I have generated 3 different PDF rendering, changing only the "target version":
a.1 PDFFormRenderSpec.setAcrobatVersion (AcrobatVersion.Acrobat_6): MyForm-ES-AcroVersion6.pdf.
b.1 PDFFormRenderSpec.setAcrobatVersion (AcrobatVersion.Acrobat_7_0_5): MyForm-ES-AcroVersion7.pdf
c.1 PDFFormRenderSpec.setAcrobatVersion (AcrobatVersion.Acrobat_8): MyForm-ES-AcroVersion8.pdf
Of all that I've created a flat version using Assembler:
a.2: MyForm-ES-AcroVersion6-flatten.pdf
b.2: MyForm-ES-AcroVersion7-flatten.pdf
c.2: MyForm-ES-AcroVersion8-flatten.pdf
Attach all forms of work[zip 4 download].
Well ... I tried to open all forms generated (six) with versions of Adobe Reader from 8.1.0 to 10.0.1.434 X and the findings are that the annoying warning message is displayed only with the flattened forms and from version 9.3 .0.148 (included) or higher.
Table of test, where
OK= No message at open.
Err= Message displayed.
I do not understand or just logical that the most current versions (and higher) Reader is precisely this message to appear at what may be due? What's happening?
Why the message is taught only in the flattened forms?
How I can solve this problem?
Thanks.

I do not use the method "renderPDFForm" (at least not explicitly), instead use the "renderXDPForm (...)".
I added the XDP form the zip (I forgot): download from here!
And the only parameter that you can tell this method over the "target" of the resulting PDF is "com.adobe.idp.services.PDFFormRenderSpec. "
/* Common to all generated PDF */
com.adobe.idp.services.PDFFormRenderSpec renderSpec= new com.adobe.idp.services.PDFFormRenderSpec();
renderSpec.setLinearizedPDF(true);
renderSpec.setLocale("es_ES");
renderSpec.setRenderAtClient(RenderAtClient.No);
renderSpec.setCacheEnabled(false);
renderSpec.setStandAlone(true);
/* Target version 8 o superior: Usede ONLY to generate "MyForm-ES-AcroVersion8.pdf" */
renderSpec.setAcrobatVersion(AcrobatVersion.Acrobat_8);
/* Target version 7.0.5 o superior: Usede ONLY to generate "MyForm-ES-AcroVersion7.pdf" */
renderSpec.setAcrobatVersion(AcrobatVersion.Acrobat_7_0_5);
/* Target version 6 o superior: Usede ONLY to generate "MyForm-ES-AcroVersion6.pdf" */
renderSpec.setAcrobatVersion(AcrobatVersion.Acrobat_6);
After this, process PDF forms resulting in Assembler.
I tried also NO explicitly assign the "AcroVersion" ... and in such cases, the resulting AcroVersion indicated corresponds to the time of design (Adobe Designer, File / Form Properties / Default / Target Version), and in such cases the resulting PDF, also displays the warning message.
I do not know if I answered your question.
Any idea?

With acrobat 7, how do I make links (within the pdf) open in a new window-tab?

With acrobat 7, how do I make links (within the pdf) open in a new window-tab?

No love? From anyone?

How to export "Managed by" field of Distribution and Security groups and import with new values? (Exchange 2010, AD 2003)

My Active Directory environment is 2003 functional level and we have Exchange 2010.
I am trying to find out the best way to do a mass edit for the "Managed by" values of our security and distribution groups.
I know we can export the "managed by" field by csvde but I am not sure this is the correct way to do it. Also in the case that there are multiple users assigned to be managing a distribution group it only shows one value. Also powershell from Exchange
2010 can be used with "get-distribution" but as our AD environment is 2003 is this correct also?
Finally once the data is exported to csv can it be edited to then reimport and udpate the existing group managed by fields with new values?
Not really sure that the best way to go about this is.
Summary - We have 2003 AD with Exchange 2010 and I am trying to export a list of all our Distribution/Security groups showing the group name and managedby values so we can edit and update the
existing managedby values with new ones. In some cases we have multiple users as the owners.
Appreciate any advice on how this can be best achieved. Thank you.

Hi,
We can use the following command in Exchange 2010 to export "Managed by" field of Distribution and Security groups:
Get-DistributionGroup | Select-object Name,@{label="ManagedBy";expression={[string]::join(“;”,$_.managedby)}},Primarysmtpaddress | Export-Csv
C:\export.csv
After you changed the Managed by field in export.csv and saved it as a new file named import.csv, we can run the following command to set with new value:
Import-Csv C:\import.csv | Foreach-Object{ Set-DistributionGroup –Identity $_.Name –ManagedBy $_.ManagedBy}
Hope it works.
Thanks,
Winnie Liang
TechNet Community Support

How to export "Managed by" field of Distribution and Security groups and import with new values?

My Active Directory environment is 2003 functional level and we have Exchange 2010.
I am trying to find out the best way to do a mass edit for the "Managed by" values of our security and distribution groups.
I know we can export the "managed by" field by csvde but I am not sure this is the correct way to do it. Also in the case that there are multiple users assigned to be managing a distribution group it only shows one value. Also powershell from Exchange
2010 can be used with "get-distribution" but as our AD envronment is 2003 is this correct also?
Finally once the data is exported to csv can it be edited to then reimport and udpate the existing group managed by fields with new values?
Not really sure that the best way to go about this is.
Summary - We have 2003 AD with Exchange 2010 and I am trying to export a list of all our Distribution/Security groups showing the group name and managedby values so we can edit and update the
existing managedby values with new ones.
Appreciate any advice on how this can be best achieved. Thank you.

Hi Barkley,
You can also refer to Official Scripting Guys forum to get a script solution:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy Wang

I am having trouble downloading PDF files to my new iPad air. Works fine on my other iPads with iOS7 and iOS 5.

My other iPads easily download PDF files but my new iPad air is stumbling and the browser shuts down.

Hi John
iTunes Support wasn't of any use to me.
I have also been having another problem - with BBC iPlayer and other video streaming not working due to insufficient bandwidth, despite my overall download speed being consistently around 50Gb. This is also affecting AppleTV downloads
I am using Virgin Media as my ISP, and was wondering whether you do as well. This might be the common thread.
-Bernard

My iBooks just deleted a handful of my pdfs without a sync on my iphone 4s with new OS7. Any suggestions? I have not backed up or updated anything since just in case.

My iBooks just deleted a handful of my pdfs upon opening, without a sync, on my iphone 4s with new OS7. Any suggestions? I have not backed up or updated anything since just in case.

Happened to me on an iPad after updaing to iOS 7.0. All PDF's synced to iBooks disapperaed. I just connected to iTunes & synced them back...they all then were shown as new. Noticed I had to re-select them all, in iTunes, in order to sync them back.

If I open a PDF doc in a new tab and then try and close the tab with ctrl-w it will try and close all tabs unless I switch to another tab and back again.

Running Firefox beta and Adobe Acrobat 10. If I open a PDF document in a new tab, say http://support.avaya.com/css/P8/documents/100146419, and then try and close the tab using ctrl-w, I get the message warning me about closing all tabs. If I switch to another tab and then back to the PDF document and then hit ctrl-w, it will just close that one tab and not all tabs.
Cheers.

I've just been playing around and I set dom.ipc.plugins.enabled to true and now it closes the PDF document but not the tab. I have to do ctrl-w again to close the tab. However, leaving that set to true ruins the scroll mouse functionality as Acroread seems to want it all to itself.

I cannot convert a pdf to work with my newly purchased adobe acrobat pro XI

i cannot convert a pdf to work with my newly purchased adobe acrobat pro XI

Sorry I cannot convert pdf to Word document (typo)
Richard Gabai
Please note my new email address: [email protected]<mailto:[email protected]>
UnionPay International
208 Plaza 10, Harborside Financial Center, Jersey City, NJ 07311
Office (201) 577 5479 / Cell (917) 860 2642 / Fax (201) 577 5480 / UnionPayInt’l.com<http://140.207.194.112/column/en/en_ylsy/index.shtml>
cid:[email protected]
This e-mail contains information that may be confidential and/or proprietary. It is intended solely for the addressee. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient of this transmission, any disclosure, copying, use, or distribution of the information included in this e-mail and any attachments is prohibited. If you have received this transmission in error, please notify us by reply e-mail and permanently delete all. Thank you.

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

Yosemite crippled PDF text annotation with Preview.

In previous versions of preview, you used to be able to select 'textbox' markup tool and one-click create textboxes wherever you want on a pdf. Now, with the new Yosemite, selecting 'text' markup tool creating a textbox in the middle of the screen, not where-ever you click. This cripples the productivity of annotating lecture slides during a lecture. I don't want my text box to always appear right in the middle of the page- I want to click to place it.
Also, why is it vertically center justified- who, EVER, used vertically center justified text rather than vertically top justified text?
Are there anyways around this?

The link below provides instructions for annotating a pdf in Yosemite Preview, and additional links at the bottom of this page provide instructions for several other pdf editing capabilities:
Select and copy text in a PDF
Fill out and sign PDF forms
Add, delete, or move pages in a PDF
Crop or rotate a PDF
Add effects to a PDF
https://support.apple.com/kb/PH20218?locale=en_US&viewlocale=en_US

Creation of a new EUL in APPS mode

I need to create a new EUL in APPS mode, so, I'm following some steps from http://learndiscoverer.blogspot.com/2009/03/clamping-down-discoverer.html, in order to do everything right from the beginning.
I'm thinking in create new tablespaces (for EUL data and summaries, and temp), new database user CUST_BI with these tablespaces, and then create the new EUL. I'm following the Metalink note 373634.1, but I'am in doubt if the bold parts are OK:
$ORACLE_HOME/bin/eulapi -CREATE_EUL -APPS_MODE -CONNECT system/<password>@<db> -USER CUST_BI -PASSWORD <password> -DEFAULT_TABLESPACE disco_tbsp -TEMPORARY_TABLESPACE disco_temp -EUL_LANGUAGE US -APPS_GRANT_DETAILS apps/<password> -log EULcreation.log
$ORACLE_HOME/bin/eulapi -CONNECT CUST_BI/<password>@<db> -GRANT_PRIVILEGE -USER DISCOADMIN -PRIVILEGE administration -PRIVILEGE all_admin_privs -LOG grantEULAdminPriv.log
1) Is the CUST_BI database user in the right place ?
2) As you can see, I need to separate the BI administration from EBS administration... and DISCOADMIN is a new Apps user... any checklist/recommendation for this new Apps. user?
Thanks in advance
Alfonso

Hi,
1) Is the CUST_BI database user in the right place ?Yes, though you should add the language code to the user name, e.g. CUST_BI_US. This will be the EUL owner, the schema that holds all the EUL tables. The temporary tablespace you specify in the create_eul command is only used when you connect as the EUL owner, so is not important.
When you connect as an apps user the connection will be made using the APPS database user, and therefore the temporary tablespace used (and location of MVs) will be the temporary and default tablespaces associated with the APPS user. You can change the temporary tablespace just for the Discoverer users by issuing a ALTER SESSION SET CURRENT_SCHEMA command in a PL/SQL procedure called during the initialisation of the Discoverer sessions.
2) As you can see, I need to separate the BI administration from EBS administration... and DISCOADMIN is a new Apps user... any checklist/recommendation for this new Apps. user? The disco administration user can be any apps user who has EUL administration privileges in the EUL. This user should then be used to create all business areas, etc.
Rod West

Replacement price of iphone 5s with new one

replacement price of iphone 5s with new one

Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
Out-of-warranty pricing varies for Apple accessories such as adapters and Apple iPhone cases. Contact your carrier, Apple, or an Apple Authorized Service Provider for more information.
Warranty after service
Apple covers defects if they arise from authorized service for 90 days or the remaining term of your iPhone warranty, whichever is longer.

PDF Distribution Limitations with new EULA?

Similar Messages

Maybe you are looking for