PDF output not showing all 4000 characters

Hi,
I have a placeholder column of character data type and its width is 4000. When I execute the report and see it pdf output it shows only 1980 characters with last line characters going beyond the report margins.
Is there a way to display all 4000 characters?
Thanks,
Mitiksha

Hi Ade,
I tried all possible combinations of fetching the data. Writing a PL/SQL function and assigning the data to placeholder in before report trigger. Also, tried to use a query and then assign the data to placeholder through formula column. Directly assigining the database column on field without using placeholder.
While trying all the above options, I ensured that width is set to 4000 characters.
But all in vain. It works fine for 2000 characters but not able to print 4000 characters.
Regards,
Mitiksha

Similar Messages

ABAP query output not showing all output fields

I added a new field group in an existing query and marked them to display in the output list. When I test the output from SQ01 -> InfoSer Query, the output is what I expect. However, if I execute the query itself, it does not show the additional fields I just created.
I notice that in the Basic List layout design, the new fields are on a new line and not appended to the same line as the output fields before I did the modifications. I already tried to manipulate the output length and positions, but it didn't help. I turned on the ruler to drag the fields in the desired positions, sometimes it works but not for all the fields. Can someone help me please?

I figured it out already. The maximum width for the report output is 255 only. Switching from graphical query painter, I got the error that some fields were overlapping. Then I recalculated the starting positions of the fields and adjusted their lengths.

Concatenated PDF file does not show all content.

When I concatenate 2 single page pdf file into one pdf file, the concatenated page does not show all the content. It misses the last line on the 2nd page.
However the thumbnails view shows the missing line correctly.
Also, if I view the concatenated pdf into another pdf view, it shows the content correctly.

Upon further research in the merged pdf file, it appears the merged pdf file has 2 references to the same field "UFE_ISSUE_DATE".
If I edit the pdf file in the text editor and change one of the field name to "UFE_ISSUE_DATE_TEST", then the pdf gets rendered correctly with date value shown correctly!
So, we decided to use 2 different field names in each of the individual pdf for this field only.
But, what causes confusion is that we do have several other fields with same field name in each of the individual pdf file, but upon merge they appear correctly. Searching for such field name in the merged pdf file via text editor, I can see only 1 reference. Not sure, why this particular field "UFE_ISSUE_DATE" has 2 references in the merged pdf file.
Any one has any thoughts?

Text Entry Box not showing all text

I am creating a simple exercise where I would like the user to copy text from the course, paste it into word, and report back what the word count is. I thought perhaps the Text Entry Box would be the best way to go, since if you click on the existing (default) text, you can copy it. However after I place the paragraph of text in the box, and resize in the editor so that all the text shows, it does not show all the text when playing back, either previewd or published. It only shows the last few words of the last line at the top of the box.
Is there something I am missing? Or, is there an easier/better way to do what I need?
Thanks

Hi all
If this is Captivate 4, there may not be any need for a widget to do this. I'm guessing you haven't tried enabling the Scroll Bar for the Text Entry Box (TEB)?
When I just plop a TEB on a slide, I get this in edit view:
During playback it looks like this:
But if I edit the TEB properties and enable the Show Scrollbar option:
I get this in the output:
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Dmstool sometimes does not show all metrics

Platform: HP-UX B.11.11 U 9000/800
9iAS: 9.0.3.1
Sometimes dmstool does not show all metrics. there are different output generated by dmstool in different time. Who can explain why this occurs?
$ dmstool -t JVM
FLEXMON ERROR: Unknown type: JVM
prod1*J2SA02-/u02/app/oracle/product
$ dmstool -l -t
Host
Process
dms_cProcessInfo
modplsql
modplsql_Cache
modplsql_DatabaseConnectionPool
modplsql_HTTPResponseCodes
modplsql_LastNSQLError
modplsql_SQLErrorGroup
ohs_child
ohs_module
ohs_responses
ohs_server
ohs_virtualHost
opmn_oc4j_proc
opmn_ohs_proc
opmn_process
# but after 5 min:
$ dmstool -l -t
Host
JDBC_Connection
JDBC_Driver
JDBC_Statement
JVM
Process
dms_cProcessInfo
modplsql
modplsql_Cache
modplsql_DatabaseConnectionPool
modplsql_HTTPResponseCodes
modplsql_LastNSQLError
modplsql_SQLErrorGroup
oc4j_context
oc4j_ear
oc4j_jsp(threadsafe=true)
oc4j_jspExec
oc4j_opmn
oc4j_servlet
oc4j_task
oc4j_web_module
ohs_child
ohs_module
ohs_responses
ohs_server
ohs_virtualHost
opmn_oc4j_proc
opmn_ohs_proc
opmn_process

DMStool displays the DMS metrics of the system dynamically. DMS will not have the DMS metrics for the component, if the component is NOT up and running. In your first case, there was no OC4J JVM up and running. Therefore, there was no metric related to OC4J including JVM. To verify this, you could issue the following command:
dmstool -t opmn_process
dmstool would list DMS metrics of the processes started by OPMN. You would see there is no JVM process started.
In your second case, OC4J finally started. So you saw the metrics for OC4J JVMs.
DMS obtains process information from OPMN. It takes some time for OC4Js to start up and register themselves with OPMN. This is why you noticed the delay.
Hope this help.
Zhunquin Wang

PDF does not show up

Hi all,
The following is my code snippet in JSP for a project which i used to generate a PDF file. But the PDF does not show up . The Adobe loads and i get a pop-up saying
'Acrobat could not open 'Example[1].pdf' because it is either not a supported file type or because the file has been corrupted.'
This is the code snippet i used:
<%@ page import="java.io.*" %>
<%
String s = new String("Hai this is PDF Sample");
byte file[] = s.getBytes();
try
BufferedInputStream inputStream = new BufferedInputStream(new ByteArrayInputStream(file));
BufferedOutputStream outputStream = new BufferedOutputStream(response.getOutputStream());
response.setHeader ("Content-Disposition", "attachment; filename=Example.pdf");
response.setContentType("application/pdf ; charset=iso-8859-1");
int bytes = 0;
byte buffer[] = new byte[1024];
while((bytes = inputStream.read(buffer)) != -1)
outputStream.write(buffer,0,bytes);
inputStream.close();
outputStream.flush();
outputStream.close();
}catch
(Exception e){}
%>
Can anyone please help me out.
Thanks in Advance.
RDP.

FOP is an Apache project that lets you generate PDFs using XML and XSL.
Here's the servlet:
package common.servlets;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.PrintWriter;
import java.io.StringReader;
import java.net.URLDecoder;
import java.util.Map;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.sax.SAXResult;
import javax.xml.transform.stream.StreamSource;
import org.apache.fop.apps.Driver;
* A servlet that takes XML and XSL streams and sends back a PDF file,
* using Xalan and FOP.
public class PDFServlet extends HttpServlet
    /** Response content type */
    public static final String DEFAULT_RESPONSE_CONTENT = "application/pdf";
    /** Parameter/attribute name for XML input */
    public static final String DEFAULT_XML_NAME = "print.xml";
    /** Parameter/attribute name for XSL input */
    public static final String DEFAULT_XSL_NAME = "print.xsl";
    /** Default character encoding */
    public static final String DEFAULT_CHAR_ENCODING = "UTF-8";
    /** Transformation factory */
    private TransformerFactory transformerFactory;
     * Initialize the servlet
     * @throws ServletException if the initialization fails
    public void init() throws ServletException
        try
            this.transformerFactory = TransformerFactory.newInstance();
        catch (Exception e)
            throw new ServletException(e);
     * Process a GET request
     * @param servlet request
     * @param servlet response
     * @throws ServletException if the servlet fails
     * @throws IOException if IO fails
    public void doGet(HttpServletRequest request,
                                 HttpServletResponse response)
        throws ServletException, IOException
        this.doPost(request, response);
     * Process a POST request by looking up the JSP using the source + action
     * parameters
     * @param servlet request
     * @param servlet response
     * @throws ServletException if the servlet fails
     * @throws IOException if IO fails
    public void doPost(HttpServletRequest request,
                       HttpServletResponse response)
        throws ServletException, IOException
        try
            Driver driver = new Driver();
            driver.setRenderer(Driver.RENDER_PDF);
            ByteArrayOutputStream baos = new ByteArrayOutputStream();
            driver.setOutputStream(baos);
            Map parameters   = request.getParameterMap();
            String xmlString = null;
            if (parameters.containsKey(DEFAULT_XML_NAME))
                xmlString = request.getParameter(DEFAULT_XML_NAME);
            else
                xmlString = (String)request.getAttribute(DEFAULT_XML_NAME);
            String xslString = null;
            if (parameters.containsKey(DEFAULT_XSL_NAME))
                xslString = request.getParameter(DEFAULT_XSL_NAME);
            else
                xslString = (String)request.getAttribute(DEFAULT_XSL_NAME);
            if ((xmlString != null) && (xslString != null))
                xmlString = URLDecoder.decode(xmlString, DEFAULT_CHAR_ENCODING);
                xslString = URLDecoder.decode(xslString, DEFAULT_CHAR_ENCODING);
                Source xml = new StreamSource(new StringReader(xmlString));
                Source xsl = new StreamSource(new StringReader(xslString));
                Result fop = new SAXResult(driver.getContentHandler()); // Intermediate result
                Transformer transformer = this.transformerFactory.newTransformer(xsl);
                transformer.transform(xml, fop);
                response.setContentType(DEFAULT_RESPONSE_CONTENT);
                response.setContentLength(baos.size());
                response.getOutputStream().write(baos.toByteArray());
                response.getOutputStream().flush();
            else
                PrintWriter out = response.getWriter();
                if (xmlString == null)
                    out.println("Missing XML");
                if (xslString == null)
                    out.println("Missing XSL");
        catch (TransformerException e)
            e.printStackTrace(System.err);
            throw new ServletException(e);

Adobe PDF Toolbar Not Showing In Firefox

I installed CS5 Master Collection in Windows 7 64 and Adobe PDF toolbar installed automatically in IE8 but not in Firefox latest version. Would somebody please tell me what to do to install in Firefox?
Thanks a lot!

Thank you for all the information. I'll upgrade to Acrobat X.
Date: Sun, 6 Feb 2011 11:45:21 -0700
From: [email protected]
To: [email protected]
Subject: Adobe PDF Toolbar Not Showing In Firefox
Adobe Reader if always free. Acrobat requires a purchase.
Also Acrobat X has different UI, there is usually a floating toolbar that can be used to open the full toolbar.
>

SelectOneChoice not showing all values from database

Hi!
I have to put a list of values in my select one choice. When I do the query in database, all the values are selected. But, with the same query on JPQL, the select on choice do not show all values in database. Anyone can help me, please?
P.S.: I am using SelectOneChoice with SelectItems, in JDeveloper 11g
Code:
<af:selectOneChoice id="selAction" value="#{row.idCmd}"
unselectedLabel="<Selecione>">
<af:forEach var="alertTypeNode"
items="#{bindings.actionFindAll.iteratorBinding.allRowsInRange}">
<af:selectItem value="#{alertTypeNode.dataProvider.idCmd}"
label="#{alertTypeNode.dataProvider.nmCmd}"
id="si1"/>
</af:forEach>
</af:selectOneChoice>

In your page binding check the rangesize setting for the executable you use - set it to -1.

Transaction MD04 does not show all open sales/orders deliverys

Hi,
Transaction MD04 does not show all open deliverys and sales orders for plant 0705 and certain materials.
Can anyone tell me the reason for this?
Regards,
Brijesh

Hi
Run SDRQCR21 report in Transaction SE38 for that material it will resolve your issue.
Please confirm
Amit

Analysis does not show all rows returned by SQL

Hi.
OBIEE 11.1.1.7.0
I have a strange problem. I have a simple table that should return customer number and sales. The report will show all of the sales, but it does not show all the customer numbers. The SQL that OBIEE creates does return all of the customer numbers. When I remove the sales and just include the customer number, the report only shows a couple of the customer numbers (it should show several hundred).
I guess what I'm looking for is any advice for how to debug this. I have spent about 3 days on this problem, so I have tried to look at it from every angle (data, RPD, report).
Any suggestions are appreciated.
Thank you.

Thank you for your reply.
New development. The issue has to do with a descriptor ID column. The customer number column is a varchar field and I set the descriptor ID column to the column_ID field. When I remove the descriptor ID setting, I received all custom numbers.

I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?

I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?

You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

Ical not showing all day events in lion osx

ical does not show all day events

Hi,
I noticed that the issue only happens to specific user with specific computer. Please do the following checking to narrow down the issue:
1. please update the Outlook client with the latest patches and service packs.
2. disable using Exchange cached mode and check whether the issue happens in Online mode in this computer.
3. Start
Outlook in safe mode to have a try.
4. Perform a clean boot
in your Windows for the new machine.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

List view not showing all podcasts

Guys, I have the annoying problem that podcast management by itunes and the podcast app are F'ed up.
Not too lobg ago I experienced my ipad greying out most podcasts that were downloaded and on my ipad, for no reason at all. it took me 2 days fiddling with settings and ended up having to set every sync to "on" and set donwloading to "all" and "keep all podcasts"
Now I'm experiencing the problem that the "list" view in podcast app, is not showing all podcasts, but the "thumbnail" view is (as far as I can tell...). Why is this and how can I fix it to make sure both views show everything?
I'm running iOS 7.0.6 and iTunes 11.1.5

Hey there sporry,
It sounds like your Podcasts app is not showing your library correctly in the List view but Thumbnail looks ok. I recommend the troubleshooting in the article named:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
Install another app from the App Store
If your installed app won't open, download and install a free app that isn't on your iOS device. This should reset your Apple ID authorization.
Remember to use the same Apple ID that you used to download the app that you're having issues with.
Reinstall the app
Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
Delete the app.
Press the Home button.
Go to the App Store and download the app again.
Wait for the app to download, then open it from the Home screen.
If the download stops, you can resume it.
Thank you for using Apple Support Communities.
Cheers,
Sterling

In iphone 4 mobile me calander not showing all events in list view

i have iphone 4 Mobile me calendar not showing all events in list view where as showing all events in month/day view. why so & how to resolve

It started about a week ago. The "From" drop-dow is now missing in Mac Mail. It should appear beneath the subject line. I was working with MobileMe Chat support for about 3 hours. They cannot solve the problem and have now escalated it to the "Senior Advisor Team."

Account Dimension not showing all members in the cube in Analysis Services

Hi,
         In SAP - BPC 5.1 after processing account dimension all the members are created under account dimension in analysis services but the same cannot be found in the data cube. Hence the reports generated through SAP - BPC is not showing all the members.
         The issue looks very strange as we can see the members getting created but the same is not getting populated in the cubes. I am not able to visualize what exacly the issue is? Is it with the application or with the analysis services?
Thanks
Sharath

Your sixth sense is correct, there is definitely support in MSAS and BPC 5.1 for multiple hierarchies in the account dimension.
I'm also referring to parentH1 and parentH2, but perhaps we're still speaking of different things.
In the past, I faced a very similar problem as you, and the root cause was because I had one member, let's call it FancyParent, which, in H1, had children Child1 and Child2.
But in H2 it had children Child1, Child2 and Child3. I forget now if that was how I wanted the setup to be, or if it was a mistake on my part, but either way, MSAS doesn't allow this. The admin consol didn't complain when processing the dimension -- this was in Outlooksoft 5.0; perhaps validation has improved now.
But the cube was completely unworkable. Certain things were calculating correctly, but everything in the account dimension in the area around FancyParent (above and below it, in both hierarchies) was quite unpredictable.
By disabling first one, and then the other, of the two hierarchies, and disabling blocks of accounts, I was eventually able to pinpoint the problem. But it took days to figure out what was the problem. (The account dimension had 2500 members and 4 hierarchies, and it was not a pretty sight.)
A parent must have the same definition of children in all hierarchies. It can't, as another example, have children in H1, and be a base member in H2. Each member can have different parents in the two hierarchies, but must always have the same children in both.
To work around this problem, I had to create two separate accounts NetIncomeH1 and NetIncomeH2 (and PretaxIncomeH1, PretaxIncomH2, etc. all the way down to the point where they branched off), to get the two separate aggregations of the P&L in the two hierarchies. Once I did that, it made sense to me why, but I also swore off on frivolous extra hierarchies ever again.

PDF output not showing all 4000 characters

Similar Messages

Maybe you are looking for