PDFmaker add-in works in Word 2013, but not in PowerPoint 2013
Windows 7 64-bit
Office H&B 2013 fully updated
Acrobat XI 11.0.07
PDFmaker add-in used work perfectly in Word and PowerPoint, but lately it hangs on the "Publishing" step when used in PowerPoint. I cannot pinpoint when the error started, but it's very annoying!
Any troubleshooting suggestions would be appreciated.
Sincerely,
PDF Dude
I am currently having the same issue - when I restart PowerPoint, I am informed that the add-in pdfmofficeaddin.dll has caused PowerPoint to crash and I should disable the add-in. I have tried removing that .dll file and reinstalling Acrobat, but that does not work.
If you disable the add-in you can still save as a PDF via PowerPoint with the standard Save As route... but my issue is that I am trying to combine a Word and PowerPoint file into one PDF, and evidently I cannot do that without pdfmofficeaddin.dll enabled, and every time it is enabled, it crashes PowerPoint.
Agreed - please help!
Similar Messages
-
VBScript control Excel via COM works in Excel 2010 but NOT in Excel 2013
Hi All,
Does anyone know of any reason why VBscript that using COM to connect to Excel and perform some basic functions would stop working when I move to Excel 2013? I have several VBscripts that run perfectly in 2010 but I get the following error when I try
using Excel 2013:
OLE error code 0x80070001:Unknown COM status code
I can't even get a very simple test VBscript to open a new workbook in Excel.
Has anyone come across this error or have any suggestions regarding the cause and/or resolution?
Thanks in advance!
JohnWe cannot tell unless you post an example of the code the causes this error along with the complete error message.
¯\_(ツ)_/¯ -
I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark -
Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.
I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes
OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.
-
Dynamic properties working in "normal KM" but not in XML forms
Hi all,
(EP 6.0 SP13)
I've implemented a Metadata Extension that returns a list of properties. The list is dynamically generated based on the folder the document is located in. I've tested the Metada Extension on both existing documents and new documents and it works fine in "normal" KM scenarios ( Word documents, file uploads, etc.).
The problem arises when I want to use these Dynamic properties in XML forms. I've added my property to a combox in the XML Forms project. When accessing the Metadata Extension from XML forms the resource path is always null. Since all my business logic is based on knowing where in the KM structure the document is, I have a small problem...
If I go to Details->Properties on the xml forms document and accesses my property there, the path is correct..
To get the resource path I use these two methods:
folder = metaContext.getResourcePath();
(for newly created documents)
folder = metaContext.getResource().getParentCollection().getRID().getPath();
(for existing documents)
these are null when calling my Metadata Extension from a XML Form.
Any ideas?
VegardHi Vegard,
Could you post the code that loads/create the property objects dynamically?
Maybe you can post it at this forum Dynamic properties working in "normal KM" but not in XML forms
so I can award you some points.
Thanks in advanced,
André -
Button hyperlinks work in project preview but not in published .swf
Captivate 6, button hyperlinks work in project preview but not in published .swf, the cursor changes the “the hand” but the hyperlink does not redirect.
Any ideas?
Like I said my buttons work great in preview mode after publishing, one click and the PDF opens in a new browser window. Open the project through the published .swf files and the links will not work.
Using Captivate 6 on WIndows 7Hello,
Welcome to Adobe Forums.
Once your project published, add the .swf file in Flash Global Setting :
1) Right Click on the content (Published .swf file) and click on Global Settings
2) Go to Advanced Tab and Click on Trusted Location Settings (Scrool down to see this button)
3) Click on "Add" button and then "Add file", browse for the Captivate 6 published file and click on OK
4) Launch the .htm file again (Location where Captivate publish your project)
Hope this helps !!
Thanks,
Vikram -
Flex mobile 4.6 app works inside flash builder but not in android emulator
Originally posted on stackoverflow: http://stackoverflow.com/questions/8663892/flex-mobile-4-6-app-works-inside-flash-builder- but-not-in-android-emulator
I have a basic flex mobile 4.6 app and it works fully fine in the flash builder built-in emulator using an android device profile like aria...
It also launches fine in the android emulator but one particular view shows blank (and this view works fine in flash builder).
Before I get in to many details of the view are there any categorical gotchas that can be causing this?
I can't seem to get the trace statements from the app to show in 'adb logcat'. It seems I need to compile a debug version of the apk but I don't know how to do this. I use the 'Export Release Build' from the Project menu in flash builder and it doesn't seem to have an option for debug=true.
The problematic/blank view basically uses the stagewebview and iotashan's oauth library to call linkedin rest apis... A different (and working) view can make restful web service calls in the emulator fine, so it doesn't seem to be an internet permission.
The source code contained in the problematic/blank view is almost identical to the tutorial found at:http://www.riagora.com/2011/01/air-and-linkedin/
The differences are: a) The root tag is a View b) I use StageWebView instead of HtmlContainer c) I use my own linkedin key and tokens.
I would appreciate it if someone can provide me with some pointers on how to troubleshoot this situation. Perhaps someone can tell me how to debug the app while running in the emulator (I think I need the correct adt command arguments for this which matches the 'Export Release Build' menu but adds the debug param?)
Thanks for your help in advance.
Comment Added:
I suspect that this has to do with connections to https:// api.linkedin.com and https:// www.linkedin.com. The only reason I can think of that the same code is not having issues inside of Flex Builder but indeed having issues in the Android emulator is something to do with certificates. Any ideas?Thanks er453r,
I have created a project that clearly reproduces the bug. Here are the steps:
1) Create a UrlLoader and point it to https://www.google.com (HTTPS is important because http works but HTTPS does not)
2) Load it
3) Run in Flash Builder 4.6/Air 3.1 and then run in Android emulator. The former works with an http status 200. The latter gives you an ioerror 2032. I am assuming what works in Flash Builder is supposed to work in the Android Emulator and what what works in the emulator is supposed to work in a physical device (plus or minus boundary conditions).
I see a certificate exception in adb logcat but not sure if it's related...
Here is the self contained View code which works with a TabbedViewNavigatorApplication:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:ns1="*"
xmlns:local="*"
creationComplete="windowedapplication1_creationCompleteHandler(event) "
actionBarVisible="true" tabBarVisible="true">
<fx:Script>
<![CDATA[
import mx.events.FlexEvent;
protected var requestTokenUrl:String = "https://www.google.com";
protected function windowedapplication1_creationCompleteHandler(event:FlexEvent):void
var loader:URLLoader = new URLLoader();
loader.addEventListener(ErrorEvent.ERROR, onError);
loader.addEventListener(AsyncErrorEvent.ASYNC_ERROR, onAsyncError);
loader.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
loader.addEventListener(HTTPStatusEvent.HTTP_RESPONSE_STATUS, httpResponseStatusHandler);
loader.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
var urlRequest:URLRequest = new URLRequest(requestTokenUrl);
loader.load(urlRequest);
protected function requestTokenHandler(event:Event):void
protected function httpResponse(event:HTTPStatusEvent):void
label.text += event.status;
// TODO Auto-generated method stub
private function completeHandler(event:Event):void {
label.text += event.toString();
trace("completeHandler data: " + event.currentTarget.data);
private function openHandler(event:Event):void {
label.text += event.toString();
trace("openHandler: " + event);
private function onError(event:ErrorEvent):void {
label.text += event.toString();
trace("onError: " + event.type);
private function onAsyncError(event:AsyncErrorEvent):void {
label.text += event.toString();
trace("onAsyncError: " + event);
private function onNetStatus(event:NetStatusEvent):void {
label.text += event.toString();
trace("onNetStatus: " + event);
private function progressHandler(event:ProgressEvent):void {
label.text += event.toString();
trace("progressHandler loaded:" + event.bytesLoaded + " total: " + event.bytesTotal);
private function securityErrorHandler(event:SecurityErrorEvent):void {
label.text += event.toString();
trace("securityErrorHandler: " + event);
private function httpStatusHandler(event:HTTPStatusEvent):void {
label.text += event.toString();
//label.text += event.responseHeaders.toString();
trace("httpStatusHandler: " + event);
private function httpResponseStatusHandler(event:HTTPStatusEvent):void {
label.text += event.toString();
trace("httpStatusHandler: " + event);
private function ioErrorHandler(event:IOErrorEvent):void {
label.text += event.toString();
label.text += event.text;
trace("ioErrorHandler: " + event);
]]>
</fx:Script>
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<s:Label id="label" y="185" width="100%" color="#0A0909" horizontalCenter="0" text=""/>
</s:View> -
My applet works in the appletviewer but not in the navigator
My applet works in the appletviewer but not in the navigator
exceptions problem1 and problem2 are throwed
this is my code
import java.applet.*;
import java.net.*;
import java.io.*;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class ValiderHtml extends Applet implements ActionListener {
JButton send =new JButton("Connexion");
JScrollPane jscrollpane= new JScrollPane();
DefaultListModel lignes=new DefaultListModel();
JList lstURL = new JList(lignes);
BufferedReader reader = null;
String ligne;
URL url;
URLConnection conn;
public void init(){
this.setSize(900,400);
setLayout( new GridLayout(2,1));
jscrollpane.setBounds(new Rectangle(19,53,160,73));
jscrollpane.getViewport().add(lstURL,null);
send.addActionListener(this);
this.add(send);
this.add(jscrollpane);
public void actionPerformed(ActionEvent evt) {
Send();
public void Send(){
try {
url=new URL("http://www.developpez.com");
conn = url.openConnection();
reader = new BufferedReader(new InputStreamReader(conn.getInputStream()));
while ((ligne = reader.readLine()) != null) {
lignes.addElement(ligne);
}//fin bloc try
catch (Exception e) {
lignes.addElement("probleme1");
finally{
try{reader.close();}catch(Exception e){ lignes.addElement("probleme2");}
}// fin Send
public void paint(Graphics g) {
super.paint(g);
}// fin AppletAs for tracking the source of your problem your applet sucks.
Try e.printStackTrace() on a cought exception and check the (full) trace.
url=new URL("http://www.developpez.com");
Unless yor applet is on www.developpez.com this will throw an exception in an unsigned
applet without special policies.
Signing applets:
http://forum.java.sun.com/thread.jsp?forum=63&thread=524815
second post and last post for the java class file
http://forum.java.sun.com/thread.jsp?forum=63&thread=409341
4th post explaining how to set up your own policy with your own keystore -
Trouble playing .swf - works offline in browser but not online on website
Hi there,
I'm having trouble displaying a flash .swf file properly on my website: http://dreamriderproductions.com/fun/game-test/
When I view the .swf file locally on Chrome, I get a text box to enter my name and I can click Go and keep playing the game. For some reason, when it's up on the website, there's no text box so I can't progress. Can you?
Background: The game did used to connect to a database, but the upgrade of our website (and relocation of the swf) seems to have broken the database connection. People couldn't progress past the first screen presumable because the information on which city they were in couldn't be submitted to the database. We've got a version of the game with the database connection disabled and so the game should now work - it works locally for me but not on the website!
Any ideas?
Thanks
SionThe code you have posted is not the same code as used in:
<div id="gallery">
in the link above.
The reason that the Flash is not displaying in FF is that the portion of the code used by FF was omitted. The code currently used on the page only works in IE.
I'm no great fan of the IE conditional statements used in the code you posted so I don't blame you for not using it. But you do need to provide something for FF.... the old, out dated method would be to add and <embed> for FF... here's the newer method..
So either use code you posted above or better yet, get rid of that and replace the current <object> with
<div id="gallery">
<object id="FlashID" data="flash/201.swf" type="application/x-shockwave-flash" width="958" height="242">
<param name="movie" value="flash/201.swf">
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="6.0.65.0"/>
</object>
</div>
Give that a try. Will work in both FF and newer IE versions.
Best wishes,
Adninjastrator -
My apple id password only works on my mac but not on my iPhone or iPad
my apple id password only works on my mac but not on my iPhone or iPad what do i do?
Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button) -
Site works in the app, but not in the browser.
Hello iWeb experts,
I've got problems.
Last night I published my site. And while it appears, and functions, properly in my iWeb app, it doesn't do the same in Safari, Firefox, and Internet Explorer.
Two issues...
FONTS
I chose Bellamie, Univers Condensed, and Marydale as my fonts. From reading these forums, I've discovered those won't wysiwyg on other computers if the fonts aren't available and open on them. So my two choices are to make every bit of text a graphic or to use a set of more universal fonts, correct? So my questions are...One, is there a list somewhere of fonts that will work in any browser? And, two, is there a short-cut, or easy way to transform type into a graphic without having to create image files?
FUNCTIONS
Here are the functions that work fine in iWeb but have gone haywire in all of the browsers I tested...
• The type in one nav link appears smaller than all the rest.
• Some links are active, others are not.
• Rollover highlighting works on some links, but not others.
• Most of the rollover links appear in the proper static color, a few do not.
I've tested these functions on three Macs, one PC, and in the three browsers mentioned above. All of them show the exact same problems. So something must be going wrong with iWebs coding, or my host server musn't like iWeb.
Any thoughts, suggestions on these two issues? Thanks much for any advice.
John
PS - For reference, see: www.johnrunk.comFascinating, Kirk (+he types with one raised eyebrow+).
QuickTimeKirk wrote:
When I drag across your page most of your links do not change. The "text" portion of them doesn't change, either. Something is covering them.
I can see that. But for the life of me, I don't know what could be covering those links. In my app, when I click in the area of the links, the type is the first item selected. Unless, possibly, it could somehow be the faint reflection of my black-and-white image (me & the ground I stand on). Hmmm...
QuickTimeKirk wrote:
Single click (outside the boundaries of your page contents) and an "outline" will appear. It shows the image file dimensions and locations.
This I don't see. An outline? As in "an object outline," or as in "a list of dimensions and locations?" When I click outside my page contents, I get nothing.
Thanks, QTK. I truly appreciate your troubleshooting here.
John -
Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software. Airplay logo never appears on iPhone or iPad.
Try here > http://support.apple.com/kb/TS1538
-
How can I change an old email adress on my iCloud accout to my new email (the same as on my pc), as long as my Apple ID works on my pc but not on my iPhone?
Br
FinnYou would have to change it back to your old email address in order to turn off "Find My iPhone" on your devices. After you changed it back to your old address and deactivated "Find My iPhone" (activation lock) you could change your Apple ID to your new address again. Now it should wok on all your devices.
-
LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.
Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.
-
I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help.
It works fine through my macbook, can't find anything in settings on iphone to resolve problemThe headset has to have A2DP capability, which most (I believe) do not.
http://en.wikipedia.org/wiki/Bluetooth_profile
Maybe you are looking for
-
A friend of mine has been emailing me eps files from the Mail program on the MAC but I cannot see them as attachments in the email in Outlook or in my webmail. They seem to be coming across as images in line with the text rather than as attachments.
-
Hello, Please guide me how i can call webservice i.e EJB develped in Java Stack from ABAP program. Please let me know if some blog is avalabilbe for same. Thanks a lot in advance. regards, Vikrant
-
Windows 2008 R2 - Printer "Offline" SNMP issue.
The issue: Not unique from what I have read in these forums and elsewhere around the globe. But essentially, I have printers that go "offline" and only come back into life if I disable SNMP per printer port and therefore lose any "real" status messa
-
Disappearing content area in edit view
Hello, In contribute, the content of my page dissapears when I click to "edit page." My other pages work fine when I click to edit, it is just one page that the content dissapears. Any ideas of how to get that back? Below is the page before I click
-
How do I stop LR5 import dialogue from starting every time I insert an external drive. I have already unchecked this from Preferences to no avail.