PE 9.0 no sound with DV AVI type 2 clip, but sound is ok with Media Player and Power DVD

Dear Bill,
Thanks for helping me.
G-Spot reports:
Audio
Codec: PCM Audio
Info: 48000Hz 1536 kb/s tot (2 chnls)
Video
Codec: dvsd
Name: DVC/DV Video
Status Codec(s) are installed
Len 2:36.960   Frms 3,924   kbps 28800   Qf 2.778
Pics/s 25.000   Frames/s 25.000   Field/s 50.000
I/L   BFF   PAL
Pic (w x 720 x 576   seq ext 16:9
Sar 1.250 (5:4)   par 1.422 (~10:7)   dar 1.778 (16:9)
I have imported a WMA-file in Audio-1 track of PE – still no sound to hear. But I can see the sound in the track. (Like in my video-clip) Therefore I also think it is a setting in PE. Will you be so kind to tell me where I have to look? Because I am no expert. Or is it possible that I have to activate anything in PE? It is first time that I will work with PE 9.
Further information: The original sound of the Mini-DVD is 5:1 surround. After first problem I have changed Nero to export in Stereo, but this did not solve the problem.
Thanks and regards
Werner

Similar Messages

HT201412 Sound works (songs) on Ipad 2 but sound on videos (example utube) sound does not work. Video plays with no issue.

Sound works (songs) on Ipad 2 but sound on videos (example utube) sound does not work. Video plays with no issue.Mute us not checked in general settings. Reboot (off/on) has not helped. Deleted apps and reloaded them. Did not help. Any other suggestions thank you

If you lose sound for games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Playing back Recorded TV Programs using Windows Media Player and only hearing Sound from Front Speakers

Hi All,
I have Windows 7 Ultimate 64-Bit Service Pack 1 with Windows Media Player 11 installed.
When I click on one of my Recorded TV Programs to watch and hear, I can only hear the Sound coming from the Front Speakers.
When I right-click on the Program and open it up in Real Player Cloud. I can indeed watch the program and hear Clear Sound coming from all 5 Speakers plus the Subwoofer.
What setting do I change to use Windows Media Player and have sound coming from all 5 Speakers and the Subwoofer?
Thank you!
thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

Hi Andreas,
Thanks for the reply.
The link you put up, takes me to the page, but
"The requested URL /surround/www_lynnemusic_com_surround_test.wma was not found on this server."
That was WaterFox.
The webpage cannot be found
This in Internet Explorer 11.0
The Files in question were Recorded by Beyond TV to my Local Hard Drive.
When I open the recording in Real Player Cloud, installed on my computer, not streaming over the Internet, I hear it correctly played.
When I use Windows Media Player, nothing can be heard from the Rear Speakers.
Speakers and Hardware are working fine.
thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

Problem with media player and the uploaded music

since i downloaded the new version of the nokia pc suite every time i upload a song to the memory and try to update the library in the media player, the phone just shows the updating bar but it doesnt do nothing,it just says updating and thats it i have to cancel the operation and close the media player, and the only i dont remember that well but i think the nokia music manager is uploading the songs to another folder, right now the default folder is e: sounds/digital can that be the problem ?
and another thing, if i go to the built in archive manager in the phone i can see the songs i upload but in the media player i dont see them. Any idea?
Message Edited by alex18 on 18-Apr-2008 08:39 PM

25-Apr-2008 03:56 AM
alex18 wrote:
well i found another thing on my phone , everytime i turn off the cellphone and then turn it on the media player is allways open on the background.
this is a normal feature of n73 ME...sad isn't it? that's one thing i didn't want with my old phone...
What you can do is to go to music player then click options and then exit...
hope this helps.
CeS
"The best index to a person's character is how he treats people who can't do him any good, and how he treats people who can't fight back"

HT5622 I have a new desktop and re-installed my identity from my airtime back up and on the log in page my picture comes up with my usual password hint, but it is not accepting my password and I do not have the option to reset using my apple id - that par

I have a new desktop and re-installed my identity from my airtime back up and on the log in page my picture comes up with my usual password hint, but it is not accepting my password and I do not have the option to reset using my apple id - that particular function is in grey and cannot be clicked on

Depending on what kind of computer you have, you're gonna need to put that backup in the appropriate folder or itunes is not gonna be able to see it for you to use.

Windows Media Player and OS X - No sound

Hi,
I am running OS 10.4.3 on an iMac 20" 1.8. I have the latest version (9) of Windows Media Player and have been using it fine for the last while for times that I can't use anything else. Suddenly, last week it would not play audio on any of the video clips I have. When I launch a WMV file, the player gives me the message:
"This file may not play correctly because it was compressed with a codec that is not supported".
These are the same files that played fine last week, and still play fine on my MacMini. I have deleted WMP and reinstalled it. I have deleted all preference files that I could find and the WMP codec file in the Library/internet plugin folders, and re-istalled again. No luck. I keep getting the message and the file plays with no audio.
Any suggestions from some of you wise Mac users out there?
Thanks,
Tyler

This should fix the problem:
http://docs.info.apple.com/article.html?artnum=300832

Safari opens with a pop-up 'update media player' and starts to download it.

Mid 2010 iMac 8Gb memory. OSX 10.9.5.
Each time I open Safari a pop-up appears telling me to update the media player and asks me to click OK. the progress bar shows it is trying to download it from kgezz.easyddl.hairdreer.xyz. I quit Safari asap. General info from searches (in Firefox!) shows media player updates are used to put Trojans or other malicious control software in place.
What is the best course to take? I feel I should remove Safari and all files associated with it so it can be reinstalled but CleanMyMac2 doesn't list Safari in the programmes that can be removed completely and I'm aware just dragging the app to Trash doesn't remove all associated files, which may be causing this problem.

1.Quit Safari.
   Relaunch Safari holding the shift key down.
2. Delete Cookies
    Safari > Preferences > Privacy > Cookies and other website data:
    Click “Remove All Website Data”.
3. Safari > Preferences > Extensions
    Turn off Extensions if any and launch Safari again to test.
    Turn on those one by one and test.

I get a weak signal with WIFI or 3G on, but a strong signal with EDGE.HELP

I get a weak signal with WIFI or 3G on, but a strong signal with EDGE. This doesn't make any sense! Help!

this happens to me, too. i get 1 bar of 3g but 4-5 when it switches to edge.
i also got this on my old blackjack ii and thought maybe it was just something having to do with that phone, but i guess not!

Audigy 2 ZS and Power DVD 5 Surround Sound Questi

I am a bit new to home computing so any help would be appreciated. I am using an Audigy 2 ZS with Creative 7. speakers. I have connected the "spdif" cable from my Audigy 2 ZS to my DVD Rom player.My question is this - when using my Cyberlink Power DVD player,if I select the audio option to use my "spdif" will I get all the surround sound options(dts,dolby digital 5. etc.) to work even though it says that my current version of Power DVD(version 5)does not support all these sound options.Does the spdif connection to my Audigy card mean that it will decode all the various surround sound options regardless of what my DVD player can decode.

I?d recommend you to upgrade to WINDVD 6 or PowerDVD 6 (WinDVD is better). but if u can't...
If u want to use 7. channel audio with PowerDVD 5,these are the things u need configured:
) Speaker Settings Panel: 7. speaker option selected.
Digital Output Only disabled.
2) Explorer --> Control Panel --> Audio HQ --> Device Controls --> Decoder --> Settings --> Enable Dolby Digital EX and Enable DTS-ES Matrix 6.
3) PowerDVD 5 --> In the Speaker settings select the SPDIF Output option. (In this case, the software player sends the digital signal through spdif to the soundboard and since the soundboard has Dolby EX and DTS-ES built-in decoding).
This SPDIF option doesn?t mean that u get ONLY spdif output (although u get it) but that the signal is processed by whatever "thing" (software or hardware) is receiving it, instead of being processed by PowerDVD.
Hope this helps you.
The Magnificent Wonderbra.

Hello i have a problem ! When i brand a cd with music i can play this afterwards on my apple but not anymore on my cd player and in my car and before i went from snow leopard to lion it worked very well!?

I have a problem when i brand a cd i can play it on my computer but not in my car or cd player and this used to xork when i had snow leopard but now with lion it does not work?!

Could you explain what "branding" a CD is?
Did you copy a CD?
Is this a commercial CD?
What Mac model do you have?

Windows Media Player: all the DVDs are played with cilyndrical distortion in pictures

Hi
I have Windows 7 (but hte issue I got also on XP in a different PC)
When I play DVDs with Window Media Player (not mater if the 9 or the 10 or the 11, the issue still exist), all the movies are player with pictures that are distorted.
I mean: they look compressed in, the center of the screen, and expanded in the sides. Like if the images are wotched through a cylinder.
It happens only with DVDs. If I play an .MP4 or an .WMV, this issue doesn't occur.
Is there any settings to prevent this please?
If I use VLC this doesn't happen. Thus there should be something else that I don't know.
Please can you help me?

Hi Tormy ,
Except for running the troubleshoot tool to have a diagnostic ,please take the following steps to have a diagnostic.
1.If you got another DVD player application in the machine , this issue can occur because different DVD players install different software that is used to decode the DVD video so that it can play back. Please try to remove the other
DVD player application to have a check.
2.Considering the other formats will play well ,there is a possibility that the format of these DVD are not supported by the Windows Media Player. It`s recommend to download the codec you need from the website to have a check .
For the codec questions ,here is a link for reference:
Codecs: frequently asked questions
http://windows.microsoft.com/en-hk/windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=windows-8
3.Sometimes the antivirus software may cause this issue, please turn off the antivirus software temporarily to have a check.
4.Apart from all the above suggestions, please ensure you have got the latest video card driver or reinstall it from the device manager.
Best regards

AVI length different in CS5 than CS4, GSpot, Media Player, etc

Hi folks,
I'm not quite a complete neophyte but close so my apologies if I've missed something obvious.
I've just upgraded to CS5 (5.03) and am encountering a puzzling situation. I'm have a set of Cineform AVIs (codec version 6.9.3.530) converted from 2 different camera's (one creates .mts files and the other .tod) and while the final avi's from one camera (.mts source file) seem to be working fine, files from the other will only report just over 2 minutes in lentgh. Actual time is better than 16 minutes.
Not working within a sequence yet, just looking at the file in the Project window, Source monitor and properties.
AVI's in question play fine in Premiere CS4, VLC, Media Player, etc. Everything looks to be alright in GSpot (correct length reported, plays fine). Interestingly GSpot reports 24,346 frames and CS5 reports 12173 keyframes, 12173 delta frames ... same I think?
To sum up ...
Cineform AVIs created from 2 different source file types (mts and tod) during the same conversion batch session (same setttings).
Both sets of AVIs work fine in CS4 and other apps
AVIs beginning life as MTSs working fine in CS5
AVIs starting as TOD are only about 2 minutes long in CS5 but lengths are fine elsewhere.
Any ideas or other information I could provide to help solve this?
Thanks much,
Lee

Nevermind ... not that simple apparently. I managed to get one of the avi's in the CS5 project created automatically when opening the original CS4 project to show the entire contents but can't replicate the behavior to another project using the same avi. Here are the media start, end, duration and video in, out duration values for the file. Viewing the avi in the source monitor I can see the full 16+ minutes. Odd disconnect between the 2 sets of values.
Any idea would be great!
Thanks,
Lee

I can facetime with a friend in korea but i cant facetime with a friend in florida what is going on ?

i can facetime with a friend in korea but i can't facetime a friend in florida what is going on ? how do you delete an app that is still downloading ? i downloaded an app and it is taking forever to download , i've downloaded the app before and it didn't take this long what is going on? if anyone can help me that would be great thanks a bunch!!!

Short Answer: Yes
When they set up facetime, they either used an apple ID, or (for iphone only) their phone number. You call using one of them. An apple id linked email address in my opinion is simpler, as you don't need to worry about country codes and the like. (I have never tried to facetime anyone out of the country, so I will admit I am not sure what you do about country codes.)
These articles are a little dated, but should help you set up your or your friends facetime if you need to.
Facetime Setup for iphone guide: http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-facetim e-set-up-use-and-troubleshooting-problems/
Facetime setup for mac: http://simpleleapsoftware.com/blog/how-to-setup-facetime-on-your-mac/486/

When I export an iMovie Project with a sped up clip, the sound is squeaky even though I lowered the pitch in iMovie. Help?

I've lowered the pitch of th video in iMovie, but when exported, the sound is very high pitched and squeaky.

While we all have MacBooks in this forum not all of us use iMovie. There's an iMovie Support Community where everybody uses iMovie. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/ilife/imovie

Media Playback With Windows Media Player and Quicktime

I just bought a mac book. Is there any way to have quicktime not the default player or to have it bring out the video from the safari window. because there are some sites that i go to and it just starts playing quicktime inside the browser video but i want it big in its own window. and is there anyway to just have the video play without the download box come up and just have the video play in whatever player without manually going to the hard drive and choosing which program to open the video with? thank you for any help
MacBook 2.0 Mac OS X (10.4.7)

Microsoft AVI with codec set to None.
Or you can install the free Lagarith or UT codecs. Both work very nice with PP. Both use lossless compression, so you won't lose any quality, but will get smaller files (especially when using a YUV mode).

PE 9.0 no sound with DV AVI type 2 clip, but sound is ok with Media Player and Power DVD

Similar Messages

Maybe you are looking for