PEAP clients stuck in the 8021X_REQD state
Hi,
I've got complaining for lots of PEAP clients not connecting to wireless network. Everything was working fine before. I logged into WLC and found out these clients are associated but stuck in the 8021X_REQD state. I checked our Radius server and couldn't find the failed log. The below message shows the debug for a client 00:0b:6b:24:66:55 and the attachment is the client info shown on the WLC. Please help. Thanks.
(vau-cr-wlc4402-1) >debug client 00:0b:6b:24:66:55
(vau-cr-wlc4402-1) >Mon Aug 8 15:40:53 2011: 00:0b:6b:24:66:55 802.1x 'timeoutEvt' Timer expired for station 00:0b:6b:24:66:55
Mon Aug 8 15:40:53 2011: 00:0b:6b:24:66:55 Retransmit 1 of EAP-Request (length 127) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 Association received from mobile on AP 00:1c:57:8b:34:e0
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 STA - rates (8): 130 132 139 150 140 18 152 36 176 72 96 108 0 0 0 0
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 STA - rates (12): 130 132 139 150 140 18 152 36 176 72 96 108 0 0 0 0
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 Processing RSN IE type 48, length 20 for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 Received RSN IE with 0 PMKIDs from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Initializing policy
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 10.115.148.80 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:1c:57:8b:34:e0
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 apfPemAddUser2 (apf_policy.c:209) Changing state for mobile 00:0b:6b:24:66:55 on AP 00:1c:57:8b:34:e0 from Associated to Associated
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 Stopping deletion of Mobile Station: (callerId: 48)
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 Sending Assoc Response to station on BSSID 00:1c:57:8b:34:e0 (status 0)
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 apfProcessAssocReq (apf_80211.c:3838) Changing state for mobile 00:0b:6b:24:66:55 on AP 00:1c:57:8b:34:e0 from Associated to Associated
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 dot1x - moving mobile 00:0b:6b:24:66:55 into Connecting state
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 Sending EAP-Request/Identity to mobile 00:0b:6b:24:66:55 (EAP Id 1)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL START from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 dot1x - moving mobile 00:0b:6b:24:66:55 into Connecting state
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP-Request/Identity to mobile 00:0b:6b:24:66:55 (EAP Id 2)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received Identity Response (count=2) from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 EAP State update from Connecting to Authenticating for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 dot1x - moving mobile 00:0b:6b:24:66:55 into Authenticating state
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=204) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 WARNING: updated EAP-Identifer 2 ===> 204 for STA 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 204)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 204, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=205) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 205)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 205, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=206) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 206)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 206, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=207) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 207)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 207, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=208) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 208)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 208, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=209) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 209)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 209, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=210) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 210)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 210, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=211) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 211)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 211, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=212) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 212)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 212, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=213) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 213)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 213, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=214) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 214)
Mon Aug 8 15:42:04 2011: 00:0b:6b:24:66:55 802.1x 'timeoutEvt' Timer expired for station 00:0b:6b:24:66:55
Mon Aug 8 15:42:04 2011: 00:0b:6b:24:66:55 Retransmit 1 of EAP-Request (length 127) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Association received from mobile on AP 00:1c:57:8b:0d:40
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 STA - rates (8): 130 132 139 150 140 18 152 36 176 72 96 108 0 0 0 0
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 STA - rates (12): 130 132 139 150 140 18 152 36 176 72 96 108 0 0 0 0
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing RSN IE type 48, length 20 for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received RSN IE with 0 PMKIDs from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Deleted mobile LWAPP rule on AP [00:1c:57:8b:34:e0]
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Updated location for station old AP 00:00:00:00:00:00-0, new AP 00:1c:57:8b:0d:40-0
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Initializing policy
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 10.115.148.80 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:1c:57:8b:0d:40
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 apfPemAddUser2 (apf_policy.c:209) Changing state for mobile 00:0b:6b:24:66:55 on AP 00:1c:57:8b:0d:40 from Associated to Associated
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Stopping deletion of Mobile Station: (callerId: 48)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending Assoc Response to station on BSSID 00:1c:57:8b:0d:40 (status 0)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 apfProcessAssocReq (apf_80211.c:3838) Changing state for mobile 00:0b:6b:24:66:55 on AP 00:1c:57:8b:0d:40 from Associated to Associated
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 dot1x - moving mobile 00:0b:6b:24:66:55 into Connecting state
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP-Request/Identity to mobile 00:0b:6b:24:66:55 (EAP Id 1)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received Identity Response (count=1) from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 EAP State update from Connecting to Authenticating for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 dot1x - moving mobile 00:0b:6b:24:66:55 into Authenticating state
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=153) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 WARNING: updated EAP-Identifer 1 ===> 153 for STA 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 153)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 153, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=154) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 154)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response packet with mismatching id (currentid=154, eapid=153) from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 154, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=155) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 155)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 155, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=156) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 156)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 156, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=157) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 157)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 157, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=158) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 158)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 158, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=159) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 159)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 159, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=160) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 160)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 160, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=161) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 161)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 161, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=162) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 162)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 162, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=163) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 163)
Mon Aug 8 15:43:03 2011: 00:0b:6b:24:66:55 802.1x 'timeoutEvt' Timer expired for station 00:0b:6b:24:66:55
Mon Aug 8 15:43:03 2011: 00:0b:6b:24:66:55 Retransmit 1 of EAP-Request (length 127) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:33 2011: 00:0b:6b:24:66:55 802.1x 'timeoutEvt' Timer expired for station 00:0b:6b:24:66:55
Mon Aug 8 15:43:33 2011: 00:0b:6b:24:66:55 Retransmit 2 of EAP-Request (length 127) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Association received from mobile on AP 00:1c:57:8b:0d:40
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 STA - rates (8): 130 132 139 150 140 18 152 36 176 72 96 108 0 0 0 0
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 STA - rates (12): 130 132 139 150 140 18 152 36 176 72 96 108 0 0 0 0
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing RSN IE type 48, length 20 for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received RSN IE with 0 PMKIDs from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Initializing policy
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 10.115.148.80 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:1c:57:8b:0d:40
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 apfPemAddUser2 (apf_policy.c:209) Changing state for mobile 00:0b:6b:24:66:55 on AP 00:1c:57:8b:0d:40 from Associated to Associated
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Stopping deletion of Mobile Station: (callerId: 48)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending Assoc Response to station on BSSID 00:1c:57:8b:0d:40 (status 0)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 apfProcessAssocReq (apf_80211.c:3838) Changing state for mobile 00:0b:6b:24:66:55 on AP 00:1c:57:8b:0d:40 from Associated to Associated
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 dot1x - moving mobile 00:0b:6b:24:66:55 into Connecting state
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP-Request/Identity to mobile 00:0b:6b:24:66:55 (EAP Id 1)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received Identity Response (count=1) from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 EAP State update from Connecting to Authenticating for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 dot1x - moving mobile 00:0b:6b:24:66:55 into Authenticating state
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=174) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 WARNING: updated EAP-Identifer 1 ===> 174 for STA 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 174)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 174, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=175) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 175)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 175, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=176) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 176)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 176, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=177) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 177)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 177, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=178) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 178)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 178, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=179) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 179)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 179, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=180) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 180)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 180, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=181) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 181)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 181, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=182) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 182)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 182, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=183) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 183)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 183, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=184) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 184)
Mon Aug 8 15:44:07 2011: 00:0b:6b:24:66:55 802.1x 'timeoutEvt' Timer expired for station 00:0b:6b:24:66:55
Mon Aug 8 15:44:07 2011: 00:0b:6b:24:66:55 Retransmit 1 of EAP-Request (length 127) for mobile 00:0b:6b:24:66:55
(vau-cr-wlc4402-1) >debug disable-all
Hi,
Check the username/password database on the AD if ur using one or check if the AD is integrated correctly with the IAS or the ACS.
Issue either on the IAS or ACS (RADIUS server) , the WLC is waiting for the response from the RADIUS.
Regards
Surendra
Similar Messages
-
Sync Process stuck on the Process State
This morning i check the Sync status like every morning and find out this issue:
Sync failed with the exception "Error in RelationalProviderProxy.ExecuteAndRetryServiceOperation, Method: Void <BeginSession>b__0(), CurrentTimeout: 60 Exception
Details: System.ServiceModel.Security.MessageSecurityExceptionThe security timestamp is invalid because its creation time ('2014-10-27T20:43:13.669Z') is in the future. Current time is '2014-10-27T20:38:13.124Z' and allowed clock skew is '00:05:00'.Server
stack trace: at System.ServiceModel.Security.SecurityTimestamp.ValidateFreshness(TimeSpan timeToLive, TimeSpan allowedClockSkew) at System.ServiceModel.Security.SecurityTimestamp.ValidateRangeAndFreshness(TimeSpan timeToLive, TimeSpan allowedClockSkew)
at System.ServiceModel.Security.ReceiveSecurityHeader.ReadTimestamp(XmlDictionaryReader reader) at System.ServiceModel.Security.ReceiveSecurityHeader.ExecuteFullPass(XmlDictionaryReader reader) at System.ServiceModel.Security.StrictModeSecurityHeaderElementInferenceEngine.ExecuteProcessingPasses(ReceiveSecurityHeader
securityHeader, XmlDictionaryReader reader) at System.ServiceModel.Security.ReceiveSecurityHeader.Process(TimeSpan timeout, ChannelBinding channelBinding, ExtendedProtectionPolicy extendedProtectionPolicy) at System.ServiceModel.Security.TransportSecurityProtocol.VerifyIncomingMessageCore(Message&
message, TimeSpan timeout) at System.ServiceModel.Security.TransportSecurityProtocol.VerifyIncomingMessage(Message& message, TimeSpan timeout) at System.ServiceModel.Security.SecurityProtocol.VerifyIncomingMessage(Message& message, TimeSpan
timeout, SecurityProtocolCorrelationState[] correlationStates) at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.ProcessReply(Message reply, SecurityProtocolCorrelationState correlationState, TimeSpan timeout) at
System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String
action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage
message)Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SqlAzureDataSync.ClientServerCommon.ISyncServiceContract.BeginSession(String scopeName, SyncTaskRequestInfo syncInfo, DssConflictResolutionPolicy conflictPolicy, String objectSchema) at Microsoft.SqlAzureDataSync.AgentHostLib.RelationalProviderProxy.<BeginSession>b__0()
at Microsoft.SqlAzureDataSync.AgentHostLib.SyncServiceProxy`1.ExecuteAndRetryServiceOperation(Action operation)Inner exception: The security timestamp is invalid because its creation time ('2014-10-27T20:43:13.669Z') is in the future. Current time is
'2014-10-27T20:38:13.124Z' and allowed clock skew is '00:05:00'." For more information, provide tracing ID ‘01b12bfd-1467-4fb2-ad8e-551a85fdd1da’ to customer support.
And after that the Sync got stuck in the processing state, i try to stop it and resend it again but is still trying to stop it. I already fix the time settings in the server and restart the service of sync and nothing. Here are the info related to the Sync
Group.
STATUS
Processing
LAST SYNC
10/27/2014 4:24:00 PM
SYNC GROUP ID
045ac6f9-d27a-47ba-8194-7aadf8fc90de_East US
LOCATION
East US
SUBSCRIPTION NAME
Pay-As-You-Go
SUBSCRIPTION ID
399ba2d3-f357-4c7b-a52e-972bcb3cc2d7
CONFLICT RESOLUTION
Client WinsHi,
Thanks for you posting the subscription ID and Sync Group ID. The Microsoft support engineer will help to solve the problem from backend. Sometime delay might be expected. Your patience is greatly appreciated. Thank you for your understanding and support.
Regards,
Mekh. -
My sync group is stuck in the processing state
The database sync that we have configured has been working for months and suddenly stopped successfully running 1/19/2015 2:19 PM Pacific Time. We have the sync configured to automatically execute every 5 mins and I even tried to run it manually. The job
stays perpetually in a "Processing" state with no additional info (e.g. error, warning, etc).
Can anyone provide assistance? (e.g. reset the sync status, provide detailed logging as to the cause of the issues) What is the proper course of action? (e.g. reconfigure the sync service, etc) Please advise.
Here are the technical details of the instance:
STATUS
Processing
LAST SYNC
1/19/2015 2:19:25 PM
SYNC GROUP ID
e5c228ff-a8e8-4b99-85f8-504709e22908_West US
SUBSCRIPTION ID
4caa7e07-76e5-424d-8b4b-6f26cce36026
CONFLICT RESOLUTION
Hub WinsHi,
Thanks for posting here.
Any of the following can result in a sync group being stuck in the processing state.
a)The client agent is offline.
Be sure that the client agent is online then try again.
b)The client agent is uninstalled or missing.
Please check the above and try to sync again.
In the mean time we would check from our back-end. It may take more time than expected.
Girish Prajwal -
TS1702 My kindle app for iPad is stuck in the installing state what do I do to fix it?
My kindle app for iPad is stuck in the installing state what do I do to fix it?
Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
Agent stuck in the login state ..
Hi,
one of agent is stuck in the login state . We are using the UCCE setup version-8.5. when i was trying to kill this agent session through PG CMD line (using procmon -->>>resetas Agent ID ) its showing "Agent already logged out or pending log out. AgentID=41332752" , but after doing this that agent not able to login on any Ext. error "showing this agent is alrady loged on". Any one kindly help me to come out from this issue. We are using CTI toll kit for agent login.Hi,
If you get this message error "showing this agent is alrady loged on" only for one Extension.
Then you can deassociate and associate the device in th PG user for that phone.
I hope the issue you are talkin about the AgentID not able to login to any of the extension.
Then check in the t_Agent_Real_Time table for this agent's current state and the extension.
Login using the agentID in that extension and logout.
Regards,
Senthil -
Wireless Switch stuck on the OFF state
Hello! About 2 months ago I switched to the Windows 10 preview and would experience Internel_Power_Error, whatever not a big deal it was once every so often so it didnt bother me too much, then after Windows 10 came out I was experience this error all the time making my laptop effectivly a paper weight. I set the laptop aside since, today I pulled it out and grabbed my Windows 7 Install CD as well as the PowerSpec Driver CD. I was able to successfully go back to windows 7, but for some reason the Built-in switch to toggle Bluetooth and Wireless is stuck on the OFF (Orange/Amber) state. I have a second computer so I was able to research and transfer via USB the correct Ethernet drivers. However my laptop is still indicating that there are no connections available. My Ethernet and wireless Controller, QualComm Atheros QCA9565 802.11b/G/N WiFi Adapter:PCI\VEN_10EC&DEV_8168&SUBSYS_1944103C&REV_0CShould have driver: SP64676However when I try to install this driver it completes its install and says the driver was not installed correctly. I also have PCI Device which is missing a driver acording to the Device Manager:PCI\VEN_10EC&DEV_5227&SYBSYS_1942103C&REV_01 As well as an unknown Device:ACPI\HPQ6007 Is it possible that due to the Switch being in the OFF state these drivers are not able to install properaly? If so how do I go about disabling the Switch completly so the button has no effect on the computer whats so ever? Thank you for your time, I have looked at so many threads and tried everything I could so if anyone can point me in the right direction that would be wonderful! -Andrew
I really need some help here, I have a $900 paperweight sitting on my desk collecting dust. If anyone has any ideas no matter how crazy it is, I will try it. -Andrew
-
Why are messages not dequeuing and stuck in the ready state?
Messages are successfully enqueueing but not dequeuing and are stuck in ready state (STATE = 0). The ENQ_TIME is 5 hours ahead of system time. In one environment, AQ is working (10g 10.2.0.4.0). In the other environment, it is not working (11g 11.2.0.3.0).
I just did the following:
1. Purged queue table
2. Stopped queues
3. Dropped queues
4. Dropped queue table
5. Created queue table
6. Created queues
7. Started queues
I tested once and a record was inserted in the queue table:
MSGID <msgid>
CORRID
PRIORITY 1
STATE 0
DELAY
EXPIRATION
TIME_MANAGER_INFO
LOCAL_ORDER_NO 0
CHAIN_NO 0
CSCN 0
DSCN 0
ENQ_TIME 12/23/2014 4:33:43.338902 PM
ENQ_UID <enq_uid>
ENQ_TID <enq_tid>
DEQ_TIME
DEQ_UID
DEQ_TID
RETRY_COUNT 0
EXCEPTION_QSCHEMA
EXCEPTION_QUEUE
STEP_NO 0
RECIPIENT_KEY 0
DEQUEUE_MSGID
SENDER_NAME
SENDER_ADDRESS
SENDER_PROTOCOL
USER_DATA <user_data>
USER_PROP
Notice the RETRY_COUNT is 0. The ENQ_TIME is 5 hours ahead. In the procedures to enqueue and dequeue, there are no errors.
Following is the plsql to enqueue:
CREATE OR REPLACE PACKAGE BODY
pkg_2
AS
FUNCTION queue_create_thing ( <parameters> )
RETURN NUMBER
IS
enqueue_options dbms_aq.enqueue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle RAW(16);
v_message msg_type;
v_thing_id things.id%TYPE;
BEGIN
v_message := msg_type( <parameters> );
dbms_aq.enqueue(queue_name => '<queue name>',
enqueue_options => enqueue_options,
message_properties => message_properties,
payload => v_message,
msgid => message_handle);
RETURN v_thing_id;
EXCEPTION
WHEN OTHERS
THEN
errpkg.record_and_stop (SQLCODE);
END queue_create_thing;
PROCEDURE queue_delete_thing( <parameters> )
IS
enqueue_options dbms_aq.enqueue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle RAW(16);
v_message msg_type;
BEGIN
v_message := msg_type( <parameters> );
dbms_aq.enqueue(queue_name => '<queue name>',
enqueue_options => enqueue_options,
message_properties => message_properties,
payload => v_message,
msgid => message_handle);
END;
END pkg_2;
Following is the code to dequeue:
CREATE OR REPLACE PACKAGE BODY
pkg_1
AS
PROCEDURE create_thing ( context IN RAW,
reginfo IN sys.aq$_reg_info,
descr IN sys.aq$_descriptor,
payload IN RAW,
payloadl IN NUMBER )
IS
dequeue_options dbms_aq.dequeue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle RAW(16);
message msg_type;
BEGIN
dequeue_options.msgid := descr.msg_id;
dequeue_options.consumer_name := descr.consumer_name;
DBMS_AQ.DEQUEUE(queue_name => descr.queue_name,
dequeue_options => dequeue_options,
message_properties => message_properties,
payload => message,
msgid => message_handle);
pkg_2.create_thing( p_thing_id => message.thing_id );
UPDATE table t
SET creation_complete = 1
WHERE id = message.thing_id;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
plog.error(SQLERRM);
plog.full_call_stack;
END create_thing;
PROCEDURE delete_thing ( context IN RAW,
reginfo IN sys.aq$_reg_info,
descr IN sys.aq$_descriptor,
payload IN RAW,
payloadl IN NUMBER )
IS
dequeue_options dbms_aq.dequeue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle RAW(16);
message msg_type;
BEGIN
dequeue_options.msgid := descr.msg_id;
dequeue_options.consumer_name := descr.consumer_name;
DBMS_AQ.DEQUEUE(queue_name => descr.queue_name,
dequeue_options => dequeue_options,
message_properties => message_properties,
payload => message,
msgid => message_handle);
pkg_2.delete_thing( p_thing_id => message.thing_id );
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
plog.error(SQLERRM);
plog.full_call_stack;
END delete_thing;
END pkg_1;Following is the code to create the queue:
BEGIN
SYS.DBMS_AQADM.STOP_QUEUE ( QUEUE_NAME => '<queue name>');
SYS.DBMS_AQADM.DROP_QUEUE ( QUEUE_NAME => '<queue name>');
END;
BEGIN
SYS.DBMS_AQADM.CREATE_QUEUE
QUEUE_NAME => '<queue name>'
,QUEUE_TABLE => '<queue table>'
,QUEUE_TYPE => SYS.DBMS_AQADM.NORMAL_QUEUE
,MAX_RETRIES => 5
,RETRY_DELAY => 0
,RETENTION_TIME => 0
,COMMENT => 'Queue for processing creation of things'
END;
BEGIN
SYS.DBMS_AQADM.START_QUEUE
QUEUE_NAME => '<queue name>'
,ENQUEUE => TRUE
,DEQUEUE => TRUE
END; -
Dbca - stuck in the same state
I am trying to create a database using dbca and it is at 60% mark for a quite long time and it is in the creating and starting oracle instance
completing database creation
Oracle 9.2
Message was edited by:
user447089Are you using Linux?, in that case, you must make sure the kernel parameters meet the minimum requirementes
-
Anyone know how I might go about the following code
correctly? I need to avoid loops, so it's a little tricky for me.
Need control over playing one movie, then the next, then the next.
Eventually, I each case may have a video to play, text to display,
or another swf to load.
Thank you!
== "Code-ish"
var connection_nc:NetConnection = new NetConnection();
connection_nc.connect(null);
var stream_ns:NetStream = new NetStream(connection_nc);
my_video.attachVideo(stream_ns)
var videosArray = ["../videos/video1.flv",
"../videos/video2.flv", "../videos/video3.flv"]
switch(videosArray) {
case 1 :
stream_ns.play(videosArray[0]);
break;
// when video is done, move onto next case
case 2 :
stream_ns.play(videosArray[1]);
break;
// when video is done, move onto next case
case 3 :
stream_ns.play(videosArray[2]);
break;
// when video is done, move onto next case
};Great!
Thanks for the insight. I appreciate that.
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."
"FlashTastic" <[email protected]> wrote in
message
news:e25oh9$47f$[email protected]..
> Hi David,
>
> I've used both methods myself, I usually use the
NetStream.time method
> when I
> have a seek bar built into the app although I find it
can be a bit
> unreliable
> when using FMS (v1.5) recorded FLVs under a minute long.
>
> I know that there can be a problem with the metadata in
FLVs recorded with
> older versions of FMS where the stream length is
reported improperly
> (which has
> since been fixed), but since I haven't run into anything
that generates a
> sequence of events in the same order (stop, empty,
flush) I would say it's
> reliable.
>
> Cheers,
> FlashTastic
>
>
> -
Some guest clients stuck in DHCP_REQD state
Hi everyone,
We are regularly having issues with some (random) wireless guest users not being able to connect to our guest SSID while others are able to connect just fine. They get stuck in the DHCP_REQD state so do not even make it to the web authentication screen. We are running WLC 4404 code 7.0.98 and using the WLC (two of them) as internal DHCP servers with a /23 scope divided between the two of them. I have checked the lease allocations and there are plenty of ip addresses spare.
A couple of days ago, all the users connecting via APs associated via one of the WLCs were unable to get an ip address and were stuck in the DHCP_REQD state all day and we ended up rebooting the controller which seemed to fix the problem temporarily but today some users have again been unable to connect. The users connected to the second controller all apppeared to be working just fine. The config on both WLCs appears to be identical.
I have seen some previous discussion about this being a known Cisco bug and which have recommended a code upgrade to v7.0.116 and v7.0.220 and I just really wanted to know your thoughts about whether a code upgrade is really necessary or a misconfiguration is the more likely issue.
Just to complicate matters we are in the process of tunnelling all our guest users to anchor controllers in the DMZ but at present this issue seems to affect both users who are connecting to local WLCs and those that are being tunnelled to the DMZ controllers.
Fianlly, I just want to add that we are also looking into installing external DHCP servers in the DMZ to cater to the guest users instead of using the internal DHCP server on the WLCs. I just wanted to know of your own experiences ie whether a code upgrade will resolve the issue for now.Thanks, Viten. We are looking at upgrading the WLC code to v7.0.220 asap. Meanwhile, the DHCP_REQD issue occurred again with all users connecting to one of our WLCs and I ended up disabling/re-enabling the guest SSID on that WLC a couple of times and that seemed to do the trick for now. Longer term, I think we may need to move to external DHCP servers in the DMZ.
-
Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
RichHi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Hi All
I am seeing the below event appearing in the system log on all our Exchange 2013 servers regularly. I am not seeing any connectivity issues between any clients and the servers and no other issues have been reported at this stage.
Log Name: System
Source: Schannel
Date: 10/04/2015 9:21:17 AM
Event ID: 36871
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer:
Description:
A fatal error occurred while creating an SSL client credential. The internal error state is 10013.
I am not sure if its related to the public certificate we are using or if its related to the one provided from the local CA.I have searched and found other links that suggest it could be related to SSL versions being disabled etc.
All servers are running Windows 2012 R2 Datacenter. The Exchange CAS servers do also sit behind a pair of F5 BIG IP Load Balancers
Any suggestions on where to look?
ThanksHi,
According to the event log, the issue is related to Schannel instead of Exchange.
Please try the following steps:
1.In Control Panel, click Administrative Tools, and then double-click Local Security Policy.
2.In Local Security Settings, expand Local Policies, and then click Security Options.
3.Under Policy in the right pane, double-click System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing, and then click Enabled.
4. Ran gpupdate /force
If it doesn’t work, please go to C:\ProgramData\Microsoft\Crypto\RSA and grant "Network Services" Read permission to "MachineKeys" folder. Then restart server to have a try.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/lync/en-US/e70a8dbc-6f48-4fde-a93b-783554344822/a-fatal-error-occurred-when-attempting-to-access-the-ssl-client-credential-private-key?forum=ocscertificates
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support -
I attempted to update my iPhone 4 without realizing that I need to sync it with my laptop. My iPhone 4 is now stuck in the connect to iTunes mode and now I cannot use it. Is there a way to reverse this so I can use my phone because I do not have my computer with me?
Maybe it was hacked before and now through the update it's locked back to the original carrier.
-
Why can't i change from living in the United States, to living in Germany, so i can fulfill the application for buying a Photoshop
Hi there
Your Adobe ID was associated with the US instead of Denmark.
Please go ahead and create a new Adobe ID with the correct country, using the same email address. You will then be able to make a purchase.
Kind regards
Bev -
My ipad is stuck on the icloud backup statement and when I tap OK nothing happens.
How do I reactivate my ipad when it is stuck on the iCloud backup pop up? Tapping the OK, nothing happens.
press and hold top power button an home button at the same time for 6-8 seconds until you see anapple appear. this will restart your ipad.
if it asking you to backup or saying it hasnt backed up in awhile?
Maybe you are looking for
-
Advantage and disadvantage of xml publisher, report builder and discoverer
Hi, anyone can explain advantage and disadvantage of xml publisher, report builder and discoverer? thanks in advance!
-
Get a "Blackberry Desktop Software has stopped working" error message when I click on the icon
Here are the details of the error message Description: Stopped working Problem signature: Problem Event Name: CLR20r3 Problem Signature 01: rim.desktop.exe Problem Signature 02: 6.1.0.35 Problem Signature 03: 4dee095a Problem Signature 04: Rim.Common
-
Shared Services URL throws 404 Error
Hi, I've newly installed and configured EPM on a test server. I seem to be able to start the Hyperion Foundation Services (port 28080 is listening), but when accessing the Shared Services URL, I get a 404 error. One note: I installed the product at G
-
Hi All, I have created IDOC conversion rules for customer master data under segment E1KNA1M in BD79. One of the conversion rule is to add a "P" in front of the customer numbers in the target client. For example - source client: cust num = 1234567, ta
-
I am a language intructor, can I use Adobe Presenter to work properly on both, English, and Spanish presentations with the same software?