Pear seems not working

Hi all!
Im having trouble with php extension pear.
When I'm trying to draw graph in Snort's mysql log analyzer BASE I'm getting :
Error loading the Graphing library:
Check your Pear::Image_Graph installation!
Image_Graph can be found here:at http://pear.veggerby.dk/. Without this library no graphing operations can be performed.
Make sure PEAR libraries can be found by php at all:
pear config-show | grep "PEAR directory"
PEAR directory php_dir /usr/share/pear
This path must be part of the include path of php (cf. /etc/php.ini):
php -i | grep "include_path"
include_path => .:/usr/share/pear:/usr/share/php => .:/usr/share/pear:/usr/share/php
what can cause this problem?
thanks...

of course...
/etc/php/php.ini should be set correctly:
# php -i | grep "include_path"
include_path => .:/usr/share/pear:/usr/share/php => .:/usr/share/pear:/usr/share/php
or please tell me which config should I post you
thanks!

Similar Messages

  • Logical mapping seems not working

    Logical mapping in CF server admin seem not working.. I just
    created a logical mapping \images with a valid path in the server
    c:\images.
    If I try to access
    http://localhost:8500/images/test.gif..
    it shows the image..
    But if the same URL is embedded in the codlfusion page for a
    image. It does not show the image..
    ie.. I get a 'x' symbol for the image.. If I right click on
    the image and see the properties, it shows a URL.. Same URL, if I
    copy paste into IE browser, it shows the image.. Is there a
    problem??

    In the Coldfusion Administrator, put
    logical path = /images
    directory path = C:\CFusionMX7\wwwroot\images
    Then, this should show the picture
    <img src="/images/test.gif">
    as would
    <img src="
    http://127.0.0.1:8500/images/test.gif"
    >

  • Sudden monitor seems not working after change HD

    Hi Folks,
    after I change my original HD which is made by Hitachi to Seagate Momentus XT, my sudden monitor seems not working again, in perviusly if I take my MBP up from table with a strong accelerate, a sound like "ka-da" would be heard from HD because of the arm in HD reset to its initial position, but now with the new HD, this issue has never happened again.
    anybody know why? please do me a favor, thank you.

    http://www.seagate.com/ww/v/index.jsp?name=st95005620as-momentus-xt-sata-3gbs-4g b-500gb-drv&vgnextoid=8ba8576b12b38210VgnVCM1000001a48090aRCRD&locale=en-US
    1-800-SEAGATE (1-800-732-4283)

  • The fan of my macbook(white) seems not working its 000rpm, what will i do? a prompt says that i need to shutdown my laptop.. help please

    the fan of my macbook(white) seems not working its 000rpm, what will i do? a prompt says that i need to shutdown my laptop.. somebody help please huhuhu!

    so the fan might be broken? huhuhu ok i'll just take it to the service center

  • HT5622 I already had verify an alternate email address but it seems not working for changing my security question

    I already had verify an alternate email address but it seems not working for changing my security question
    <Email Edited by Host>

    An alternate email address is not the same thing as a rescue email address.
    If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

  • TP3 - Generic JDBC Seems Not Working - Connection Worked in TP2 but Not TP3

    I had a connection working in TP2 to a PosgreSQL database. I have done in TP3 exactly what I did in TP2 to set up the connection but the connection test fails listing the name of the driver.
    I put the JAR in jdev\lib, I added a class/library to the default project properties with the classpath listing the location of the JAR including the filename, then I created a new connection with the same driver name, user/password, and JDBC URL I used in TP2. None of this worked though. I even tried restarting JDeveloper.
    Any ideas on what I could be doing wrong or if something new needs to be done in TP3?
    On a side note, although I got the connection working to the PostgreSQL db working in TP2, JDeveloper was never able to find its tables like when creating an entity from a table for example. I know this is not an issue with the driver JAR because this works flawlessly in Netbeans 6.
    Thanks in advance for any help.
    KurzHome

    Hi CM and Chris,
    I have the exact same problem when I tried to create a connection to SQL Server 2005 using Generic JDBC. It worked well for TP2 but does not work for TP3. Further more if you create it anyway, you will get following message in testing:
    An error was encountered performing the requested operation:
    com.microsoft.sqlserver.jdbc.SQLServerDriver
    Vendor code 0.
    I tried to export the working connection from JDeveloper 10.1.2. and import it to TP3. I could not solved the problem.
    Then I export the SQL server connection from TP3. The connection is expressed as
    <Reference credentialStoreKey="yuwyuw" className="oracle.jdeveloper.db.adapter.DatabaseProvider" name="yuwyuw">
    <Factory className="oracle.jdeveloper.db.adapter.DatabaseProviderFactory"/>
    <RefAddresses>
    <StringRefAddr addrType="subtype">
    <Contents>thirdParty</Contents>
    </StringRefAddr>
    <StringRefAddr addrType="user">
    <Contents>yuw</Contents>
    </StringRefAddr>
    <SecureRefAddr addrType="password"/>
    <StringRefAddr addrType="driver">
    <Contents>com.microsoft.sqlserver.jdbc.SQLServerDriver</Contents>
    </StringRefAddr>
    <StringRefAddr addrType="DeployPassword">
    <Contents>false</Contents>
    </StringRefAddr>
    <StringRefAddr addrType="customUrl">
    <Contents>jdbc:sqlserver://host:1433</Contents>
    </StringRefAddr>
    </RefAddresses>
    </Reference>
    It seems DatabaseProviderFactory could not create connection other than Oracle. BBut JDev10.1.2 does not use Factory class. I tested Driver and URL by a small program that created a connection using connection string. No problem at all.
    Now I have 2 questions:
    1)How can we access the source code to see what happens when we submit connection creation request?
    2)You mentioned that we can swap JVM version. But this can only be done on project level. Can we do it on IDE level, because IDE connection is not associated with any project.
    Thanks,
    wyuwyu

  • Secondary monitor seems not working correctly. Please help.

    I am using a secondary monitor in Lightroom and one feature does not seem to be working correctly. Let say, I want to use the Survey mode on my secondary monitor, I select my images on the first monitor, and on the secondary monitor, I press Shift+N, and all the selected images on the first monitor in the Grid view will be displayed side-by-side on my secondary monitor in the Survey mode. But the problem is when I try to click on one selected image, and try to give it a rating, it does not just rate that individual image only, it rates all of the selected images the same rating. I don't understand! That's how it works if you are using one monitor, why it does not work on the secondary monitor. Will appreciate a fix to this problem with many thanks.

    Hope someone will help with many thanks.

  • Can't tether on iphone 4 bluetooth seems not working either

    I cannot tether anymore. Tried this morning, the hotspot option was still available, but not working with my ipad. Now the hotspot function is not even on my phone. Tried to turn off the phone, did my 6.0.1 update, and still nothing.

    I have had the same issue with my phone. I noticed that it was using up the battery too quickly. After numerous attempts to fix the issue (turn off/on, make sure there are not background apps, etc), I decided to finally do a restore.
    I have had the same issue on restoring the phone ("unknown error occurred (9)"). It appears to be an issue with the phone talking over the USB. Suggestions on Apple's site (can't find the link right now) are to try different cables, different USB ports, assure you have no other devices on the USB bus, and try another computer. I've tried all of this and haven't had any luck so far. I'm hoping that either AT&T or Apple will have a replacement phone at this point since this one seems to be bricked

  • The Sync seem not working between my other two computers, one in the spare roon, one in the hall and one in the master bedroom.

    Previous version when I use sync for all these three computers it seem to work fine and also can I install Xmark.

    Hi!
    Before Firefox 7 the service used to take some time to upload the changes and then to download them. Make sure that you wait several hours to confirm that it's not something else.
    You can force them by using the "Sync Now" option in the Tools menu.
    Fortunately, the behavior have changed with Firefox 7 and now the bookmark changes are instant.

  • All the traffic go through IPsec tunnel(site to site ) ,but something seems not working correctly

    Hi, all,
      I have seen a good post in google.com about how to make all the client's traffic though IPsec tunnel then out to the Internet from the Main site,now I attach this configuration and application for discussion, and what the problem is that I am still confused with the configuration on Main site ,  I hope anyone who can tell me more detail and how to accomplish it. Any answer will be appreciated , thank you !
    Quote :
    Question ? :
    Mine is a very simple configuration.  I have 2 sites linked via an IPsec tunnel.  Dallas is my Main HQ R1 and Austin R2 is my remote office.  I want all traffic from Austin to route thru the tunnel up to Dallas, then out to the Internet.
    Dallas (Main) Lan Net is: 10.10.200.0/24
    Austin (Remote) LAN Net is: 10.20.2.0/24
    The Dallas (Main) site has a VPN config of:
    Local Net: 0.0.0.0/0
    Remote Net: 10.20.2.0/24
    The Austin (Remote) site has a VPN config of:
    10.20.2.0/24
    Remote Net: 0.0.0.0/0
    The tunnel gets established just fine.  From the Austin LAN clients, I can ping the router at the main site (10.10.200.1).  This is how I know the tunnel is created, but I cannot ping anything beyond the router from the Austin LAN, e.g. 8.8.8.8.
    I'm sure it's something simple I failed to configure.  Anyone have any pointers or hints?
    Answer:
    Thanks to Jimp from the other thread, I was able to see why it was not working.  To fix, I had to change the Outbound NAT on the main side to Manual.  Then I created a new Outbound NAT rule that included the subnet from the Austin network (10.20.2.0).  Basically, I just created a copy of the default rule and changed the Source network.
    Once I made this change, Voila!  Traffic from the remote side started heading out to the Internet.  Now all traffic flows thru the Main site.  It makes perfect sense why I needed to make this change, it just took a slap in the head from Jimp to point me in the right direction.
    My question ?
    The answer said "To fix, I had to change the Outbound NAT on the main side to Manual.  Then I created a new Outbound NAT rule that included the subnet from the Austin network (10.20.2.0).  Basically, I just created a copy of the default rule and changed the Source network." what this mean and
    how to do it , could anybody give me the specific configuration ? thanks a lot.

    Thank you for Jouni's reply,  following is the configuration on Cisco 2800 router ,no firewall enable, :
    crypto isakmp policy 100
    encr aes 256
    authentication pre-share
    group 2
    crypto isakmp key x.x.x address 0.0.0.0 0.0.0.0
    crypto isakmp keepalive 60
    crypto ipsec transform-set IPsectrans esp-3des esp-md5-hmac
    crypto dynamic-map IPsecdyn 100
    set transform-set IPsectrans
    match address 102
    crypto map IPsecmap 100 ipsec-isakmp dynamic IPsecdyn
    interface Loopback1
    ip address 10.10.200.1 255.255.255.0
    interface FastEthernet0/0
    ip address 113.113.1.1 255.255.255.128
    ip nat outside
    ip virtual-reassembly
    duplex auto
    speed auto
    crypto map IPsecmap
    interface FastEthernet0/1
    ip address 192.168.1.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    duplex auto
    speed auto
    ip route 0.0.0.0 0.0.0.0 113.113.1.2
    ip http server
    no ip http secure-server
    ip nat inside source list 100 interface FastEthernet0/0 overload
    access-list 100 permit ip 192.168.1.0 0.0.0.255 any
    access-list 102 permit ip any 10.20.2.0 0.0.0.255

  • Photoshop Elements seems not work anymore

    As a user of Photoshop Elements 11 on my Apple Notebook, I had a problem today. All the tool buttons did not work anymore and the pictures I wanted to edit were not shown in the workspace, but right under in in an extra window. Because of that problem I removed Elements 11 and I downloaden version 12 from the Apple store. But the problem is still not solved. Anyone familiar with this problem? Suggestions for solutions?@

    That library is hidden in recent versions of OS X. To see it, click the the Go menu in the Finder and hold down the Option key and it will appear below the little house for your user account.
    Also, if you have a wacom tablet, be sure your drivers are up to date.

  • Assets on the web - seems not working

    By Creative Cloud desktop or mobile (ipad) / Show asset in the web /  https://assets.adobe.com/files - return only a blanc page !
    No file, no Adobe menu or navigation item...
    The sync continue to work with the desktop sharing folder (Creative Cloud file) !
    Another ADOBE BUG ????

    The button on the first page with the action of Go To Page 2 is not working either.

  • SuperDrive not working and bootcamp seems not working with external CD

    Hi everyone,
    I have a MacBook, and the internal SuperDrive is dead, now I'm using an
    external CD drive (USB).
    Yesterday I bought Leopard 10.5.4, (need to intall BootCamp).
    The update from Tiger to Leopard was easy, and withought problems, but when I tried to install BootCamp, the partition seems correctly created, but when the program request the Windows CD and restart, a grey screen apears and nothing
    happend... also Leopard is unable to start again, just the grey screen...
    Now I found that if I press alt key, appear the Macintosh HD and i can start it,
    but never automatically...
    What can I do? I tried to reintall again with the same result...
    I need BootCamp, if not i think i waste 129$ cause the only reason to purchase Leopard was BootCamp... also I need my computer reebot again by itself, not using the alt key... that's really anoying...
    Please Help
    Best regards.

    Hi BigWaveSurfer,
    I don't have an external CD/DVD-Drive, so I made some guessing.
    From my understanding of Windows it is more likely to work with an USB-connected external drive than with a FireWire one.
    Windows XP (and Vista to my knowledge) can only support/access Firewire devices with additional drivers, that are not loadad/used during the installation phase.
    Only when Windows is fully installed the needed Firewire driver is present and Windows can use it.
    Stefan

  • [solved] ip link set device up seems not working

    Hi all,
    It's my first Arch Linux installation, firstly I would to thanks the community, the wiki was really useful for me !
    I'm trying to set up my wifi connection (rtl8723be device),
    the driver seems to be OK
    I've installed networkmanager
    But I can't see any wifi device in networkmanager's GUI...
    So I tried :
    $ sudo ip link set wlp2s0 up
    but wlp2s0 is not switching on :
    3: wlp2s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT group default qlen 1000
    link/ether b0:10:41:df:66:23 brd ff:ff:ff:ff:ff:ff
    What could I have missed ?
    Last edited by natch (2015-04-02 09:29:39)

    The command in question did work:
    ip wrote:<NO-CARRIER,BROADCAST,MULTICAST,UP>
    The bolded "up" in the angled brackets is what `ip link set` changes.  The DOWN after that indicates that even though the interface is up, there is no active connection.
    As to what the problem is with network manager, I have no idea - I don't use it.  But the most likely suspect is almost always that there are multiple networking services competing.  So first, disable all networking services (check the output of `sysmtctl list-units`).  Then you can follow the remainer of the manual connection steps in the wiki.  If/when that is working, then we'll know your hardware and drivers are all set - then you can chose and configure a management service like networkmanager.

  • Mapviewer enableLoadingIcon seems not working

    Hi everyone.
    I have an apex application (whith mapviewer to provide maps) working, and I need to notify user (when he pans or zooms the map) that the tiles are being loaded.
    So I use the enableLoadingIcon(true) function to provide this, but the loading icon is not visible, even if there is a long time to fetch all tiles. I tried this in IE 6, 7, Firefox 3, Opera with no result.
    OracleAS MapViewer Version: Ver1033p5_B081010
    Apex ver: 3.1.2
    Have anyone seen such a behavior.
    regards, michael

    Hi, Ji, thanks for your reply.
    Than there is one more question. Is there any way to know when exactly all the tiles are loaded (i mean any undescribed event in the documentation or other indicators), so that I can set the visibiliy of the icon manualy?
    thanks, michael

Maybe you are looking for