Pearl 3G Maps (Cannot reinstall)

Greetings all, I have been running into problems with my BlackBerry Maps application, where the GPS would be very slow to get a fix. Long story short, I have decided to click on the blackberry button with BlackBerry Maps selected, and selected "delete" (effectively, removing the BB Maps application).
I then tried to reinstall BlackBerry Maps with no success. I tried the following:
  - searching for it through the AppWorld, but didn't find it
  - tired the instructions here: http://na.blackberry.com/eng/devices/features/blac​kberry_maps_download.jsp Using the instructions from the link, I sent an email to my device.
The email contains a link which, was supposed to install the BlackBerry browser. Instead, it installed something called "lbs_ribbon" instead of BlackBerry Map. How can I get BB Maps back onto the device?
Carrier:  Wind Mobile Canada
Device: Pearl 3G
Last I checked, the BlackBerry.com website does not contain the firmware for this device which means that I cannot reflash my phone.  There does not seem to be a way of notifying BlackBerry that they forgot to post the stock firmware for this model of the phone, for Wind Mobile (Canada), on the website (http://na.blackberry.com/eng/support/downloads/dow​nload_sites.jsp).

godsfantasy wrote:
Carrier:  Wind Mobile Canada
Device: Pearl 3G
Last I checked, the BlackBerry.com website does not contain the firmware for this device which means that I cannot reflash my phone.  There does not seem to be a way of notifying BlackBerry that they forgot to post the stock firmware for this model of the phone, for Wind Mobile (Canada), on the website (http://na.blackberry.com/eng/support/downloads/dow​nload_sites.jsp).
hello,
concerning the process of OS publication, here is the schedule :
RIM publishes blank OS to carriers
Wind Mobile decides to test some blank OS
Wind Mobile decides to publish some OS after branding them to Wind Mobile so that no device not sold by Wind Mobile can use it
There are many OS already available, I have made a list available here (though I have not updated it recently) :
http://supportforums.blackberry.com/t5/BlackBerry-​Pearl-3G-BlackBerry/BlackBerry-Pearl-3G-9100-9105-​...
if you want to get one from Wind Mobile, you can call the Wind Mobile support and ask them when they will decide to publish a recent OS.
that being said, you can also install an OS published by another carrier than Wind Mobile, you just have to follow this how-to :
http://supportforums.blackberry.com/t5/BlackBerry-​Device-Software/How-To-Reload-Your-Operating-Syste​...
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

  • After Upgrade to IOS 6.1, find my iPhone's map cannot see the street or city, especially in China, can we change back to google map in this app?

    After Upgrade to IOS 6.1 also with "find my iPhone" app, the map when locate my iphone cannot see the street or city, especially in China, can we change back to google map in this app?
    If the map cannot show details, how can we find my iphone? And it seem Apple just have an good idea for customer only but it is not function, why need to use Apple map in "Find my Iphone" if we all know it is not a good map!
    So stupid Apple!!!!!

    https://itunes.apple.com/us/app/google-maps/id585027354?mt=8
    It won't help find your iPhone, however.

  • I installed Adobe CC months ago. uninstalled it.. said "with errors" now I cannot reinstall Adobe CC... can anyone tell me what happened so that my money doesn't go to waste?

    Uninstalll error. Cannot reinstall. what happened here and how do I fix this?

    No one can tell you anything about what happened until you give complete details.
    Maybe someone could help you fix your issue.
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • App hung on "waiting"; during update, I lost my wifi connection; now cannot delete to reinstall (no X), syc does not help; itunes store says it is installed and I cannot reinstall; deleting from itunes and synching does not remove "hung app"; HELP

    App hung on "waiting"; during update, I lost my wifi connection and the app hung; now cannot delete to reinstall (no X), synching does not help; itunes app store says it is installed, therefore I cannot reinstall; deleting the app from itunes and synching does not reinstall the app on the ipod; the app developers have not helped and told me to check with Apple (which I am doing, since I am past my 90 day tech support). Hoping someone can help with this hung "waiting' app problem.

    - First try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next download the app on the computer and try to sync.
    - Last, restore from backup.

  • Cannot reinstall iTunes. Receive error message Error 7 (Window error 127)

    Cannot reinstall iTunes. Receive error message, Error 7 (Windows error 127)

    Have you tried working through the user tip Troubleshooting issues with iTunes for Windows updates yet? If not try that, if you get stuck ask for help...
    tt2

  • HT201413 cannot reinstall itunes, i get this message MSVCR80.dll not found.  Try to reinstall itunes and i get error 7 (Windows erro 126)  help please

    cannot reinstall itunes, i get this message MSVCR80.dll not found.  Try to reinstall itunes and i get error 7 (Windows erro 126)  help please

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

  • Plerase can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

    BrightBluephotograph wrote:
    I cannot install lightroom 5 until the upgrades from 4 are on the pc,
    You don't need to have Lightroom 3 and 4 installed on your computer to install Lightroom 5.  Just install Lightroom 5 and input your serial number for 3 in the previous version box and your serial number for 5 in the upgrade box.

  • PI 7.1 EHP1 SP3, Message Mapping cannot select object in the folder ?

    Hi,
    I am very new with PI 7.1 EHP1, i am not sure whether there is some new restriction or bug, because i was trying to create Data Type, Message Type in site the folder, but the Message Mapping cannot select those object insite the folder. The message mapping only can select those object without folder.
    Please advise ?
    Thank You and Best Regards
    Fernand Lesmana

    Hi Swarup,
    I just finish installed the PI 7.1 EHP1 SP03, so i would like to test the functionality of the PI. just create 2 DT 2 MT insite the folder.
    but when i am trying to create Message Mapping, the message mapping, i can't find these 2 MT ???.
    after that i created new MT but outsite of the folder (still same namespaces) and the message mapping can see the MT ?
    so i can make sure not duplication coz i just create those object.
    any idea ?
    Thank you and Best Regards
    Fernand Lesmana

  • BPM Message Mapping: "Cannot produce target element /ns1:BAPI...."

    Hi,
    A scenario File - BPM - BAPI call was developed, as described in blog 'RFC scenario using BPM' cfr. link
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    The Mapping is as follows:
    MT_EDB_MATERIAL_REQ (1:1) --> BAPI_MATERIAL_EXISTENCE_CHECK (1:1)
    MATNR (1:1) -
    > MATERIAL (1:1)
    When executing the scenario, an error appears in the trace of SXMB_MONI, step 'Request Message Mapping'
    Cannot produce target element /ns1:BAPI_MATERIAL_EXISTENCECHECK. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd....
    I tried the following:
    1) import the XML-file into the testmapping: executed successfully
    File:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_EDB_MATERIAL_REQ xmlns:ns0="http://agfa.com/SD_EDB">
    <MATNR>15P6X</MATNR>
    </ns0:MT_EDB_MATERIAL_REQ>
    2) Removed the mapping on node level and left mapping only on element level (material): same error
    3) Activated the message mapping, interface mapping, determinations, etc again...:same error
    4) Removed the Interface Mapping and created it again: same error
    5) Compared the version ID of the Interface Mapping/message mapping in the Monitor trace with the version ID of the IR and saw that there was a difference.
    After the CPA full cache, SXI_CACHE full refresh and object refresh in the IB Administration, the differences remain, and also the error....
    Anybody an idea ?

    Hi
    >>>Cannot produce target element /ns1:BAPI_MATERIAL_EXISTENCECHECK. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd....
    The error clearly says that one of the occurrence value  for the target node mentioned is not coming from the source during mapping. The easiest way to solve the problem is as follows
    <b>
    First Execute the mapping as pointed out by "Raj" and the following steps.
    </b>
    1. Goto the Mapping Editor
    2. Double click on the target node that is causing the problem here BAPI_MATERIAL_EXISTENCECHECK.
    3.  Right click on the same node and select "DisplayQueue".
    4. View the Queue.
    5. YOu will find "Suppress" entries, which means a value is expected but no value is coming in.
    6.Go from right to left and check each node in the mapping and you will be able to trace where the suppress node comes from and take appropriate action
    regards
    krishna

  • Cannot reinstall PS5 on the same PC

    Last week I have reinstalled my PC with Win7 Ultimate (clean install)
    As I was having some problems after installing PS5 as well, I uninstalled it from Programs and Features to reinstall it.
    Now I cannot reinstall it any more.
    I checked with the 'Advisor' and it keeps saying I should first uninstall CS4 or CS5 though I never had CS4 and Photoshop has been uninstalled and the PC rebooted.
    I do still have a LR3.6 installation, though, which I finally got working properly after trying twice as well and do not want to uninstall that.
    The error I get:
    Can somebody please advise?
    Thanks and grts
    Nil

    Hi kglad,
    No, the problem is not solved at all...
    Sorry if I sounded a bit grumpy but this thing is really giving my nerves a workout.
    And - I did not expect a crash either... I have uninstalled and reinstalled my previous version CS2 several times under other Windows versions, among others on a Vista laptop to see if it would be ok - no problem at all. Same with PS5. The only differece now is that my Win7 is 64 bits and I start wondering if that is not the problem... PS installed the 64 bits too as far as I could see but something has gone awfully wrong...
    Windows is fine now and everything in and around it working fine too as long as I don't go anywhere near PS. After the last repair of Windows mentioned here I tried the Clear Tool again - and all went down again... Another repair...
    At the moment I am giving myself a break from it all but to me PS and LR are the most important things on the PC. All else I could do from my laptop as well... I am playing with the idea that reinstalling Win7 all over again will be the only way to get rid of it and reinstall (and see if it goes any better)... but well - all that work all over again? Not an attractive idea...
    If you have any more ideas what I could try, I'm open to suggestions...
    An addition on tuesday:
    Anybody any idea where I can download the trial version of Photoshop CS5?
    Wherever I look, it starts saying CS5 and then I end up on a site with CS6....

  • Map cannot be loaded in import manager | MDM

    Hi ,
      I am trying to upload some data in customer repository (I am on MDM 5.5 SP05) . I have a few XML files (IDOCS) from customer master in an ECC system ,which I am providing as a source for the import manager . In the source preview I can see the following tables
    - DEBMAS06
    - E1KNVIM
    - E1KNVPM
    Now when I try to open the import map 00_DEBMDM06_R3.map (standard map provided by SAP) it gives me an error message "the map cannot be loaded because table E1KNA1M is not a source" .
    What do I need to get this file uploaded to the import manager ?
    Regards
    Deepak Singh

    Hi Maheshwari/Harrison ,
        I tried giving the type as XML schema as you guys suggested but now the the import manager won't open at all and I get the following error " The element DEBMAS06 is used but not declared in the DTD/Schema " .
    In the console inside the customer repository > Admin > XML schemas i have made sure that the schema name DEBMDM06 points to DEBMDM.DEBMDM06.xsd that is provided in the business content with the customer repository . Infact for all the schemas( lookup tables , bank check tables , customer check tables ) i have made sure they point to the right XSD's provided in the business content for the customer repository .
    Now what do you guys think is the problem ?
    Regards
    Deepak Singh

  • Cannot Reinstall Acrobat Pro 7.0

    I have CS2. I uninstalled Acrobat Pro 7.0. Now I cannot reinstall it from the original software. Install runs but does not install anything, nor does it show any error messages. I have XP SP3 and IE8. I have Reader 9.1.2  The other componens of CS2 work fine. Any help?

    Adobe recommends that you do not have Acrobat and Acrobat Reader installed on the same system. The programs have files that each products installs in the same folders that can cause all kinds of problems such as yours. I strongly suggest you remove Acrobat Reader using the Windows Install Cleanup Utility. Then reinstall Acrobat Pro. You still will be able to view PDF files in your browser with Acrobat itself without Reader being installed.
    Good luck.
    Ken Friedman

  • Can anyone tell me why maps cannot determine my location over wifi?

    can anyone tell me why maps cannot determine my location over wifi?

    If you only have the wifi only version iPad then the location is derived from the router that you are connected to - if it's not in the database that Apple use then your location can't be determined. Only the 3G iPad has a built-in GPS chip. If you have another wifi-only iOS device that does get a location then you could try this https://discussions.apple.com/message/15446656#15446656

  • I cannot reinstall my Elements 9 onto my new replacement Laptop as I have misplaced the serial No

    I had to replace my Laptop as it crashed.  I had Elements 9 installed on both my PC and Laptop.  However, I have misplaced the serial numbers and therefore cannot reinstall onto my new Laptop.  Can you please help?

    Hi,
    You need activation support: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivat ion-products.html
    There you can start a chat session and get it taken care of right away
    Thanks
    Andaleeb

Maybe you are looking for