Peculiar window issue when employing compiz over kwin on kdemod4.x

Whenever I switch to using compiz over kwin, the Title bar on every window disappears for all open windows. If I enable window decorator plugin then I can use minimize maximize and close but I cant move the windows around. Ive never had this problem before when enabling compiz on Ubuntu.. is there a specific feature I need to enable on my graphics card in my xconf file in order to get it to work?

You must install ccsm. There set Move window. I use Emerald window decorator and it works great.

Similar Messages

  • In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    Hello Kiira Doon,
    The troubleshooting steps detailed below may help get your iPhone's display to function.
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    My issue is still not resolved. What do I do next?Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • I need help identifying and removing annoying gadget that shows all open windows and applications when I mouse over a corner.

    It seemed like a good idea at the time. Some time ago I installed a gadget (doesn't seem to be an item in my Applications folder) which, when I mouse-over the lower-left corner of my screen, brings up a screen showing reduced-size versions of all open application windows and Finder windows. I've tried to identify what it is, and where it is located, so I can remove it, but to no avail.
    I'd really appreciate any help getting rid of this thing. Thanks!

    Hi Paul,
    Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Check the System Preferences>Keyboard>Keyboard Shortcuts.

  • On my own website vdha.us, I am now getting many words that are purple and when you mouse over them, a new spamming window opens trying to sell something. IE-9 does not do this. How do I turn this off in firefox?

    Sirs,
    The below URL came up immediately when I tried to access our Newfangled website this morning http://vdha.us :
    http://surveyprizecenter.com/survey/claimgift-GT-kw-7b.php?t202kw=Vdha.us&trimmedKeyword=Vdha.us
    I prefer to use Firefox and very seldom use IE-9. but now I might be forced to remove Firefox 4.0.1 and resort to using IE-9 because of this situation.
    I don’t know how spammers can use our website to exploit their spamming, but I can only imagine the complaints I am going to get from our Board of Directors and members about this.
    Can you make them stop, or at least explain how it is that anyone can do this without our permission.
    We have never allowed advertisement on our website and don’t plan on starting now.
    I am now also getting many words that are purple with two lines under them, and when you mouse over them, a new spamming window opens automatically trying to sell something. How do I turn this off?
    I would appreciate any expediency in the return of an answer that you can provide.
    Kindest Regards,
    Dave Broeker
    VDHA Life Member #1797
    VDHA Webmaster & BX Manager
    http://vdha.us

    The "MySearchDial" app needs to be removed in 4 places.
    1) Go to "add / remove programs" in your windows control panel select mysearchdial and remove it.
    2) Open your Firefox browser then click the Firefox tab at the top left and select options. You will need to change the start page settings back to your preferred start page.
    3) Again under the Firefox tab select "add-ons". In the add-ons manager you will need to remove mysearchdial from both "plugins" and "extensions"
    4) In your search bar (top right of address bar" use the drop down menu and select "manage search engines". You can restore your preferred search engine and remove mysearchdial from the menu.
    This should remove all the components of the nuisance hijacker and restore your browser back to your preferred settings. If you are comfortable with a more in depth removal I would also suggest going to your "programs" folder within the "C" drive of your machine and deleting the "MySearchDial" folder altogether. However, only do this AFTER you have uninstalled it from your system and if you are familiar with this type of removal.

  • In the iDVD window, there is a box in the lower left corner.  When I scroll over it, I get the message to hide or show the intro movie.  Checking or unchecking the box seems to do nothing.  Can anyone explain?

    Working with iDVD on a project, there is a box in the lower left corner and sometimes another in the lower right corner.  Scrolling over the one in the lower left corner, I get a message indicating that this box hides or shows the intro movie.  I have checked and unchecked the box, but see nothing different in the project.  Nor can I figure out what is meant by "intro movie."  Can anyone explain?

    Go to iDVD Help and type in Intro Movie, and you will get the full version of this:
    Many iDVD themes have “motion menus” that include animations or video that loop, or play repeatedly, until the viewer clicks a menu button. Themes with motion menus have a motion icon in the lower-right corner.
    In addition to background video, iDVD motion menus may also feature an intro, or short animation, that plays once before the part that loops. Other motion menus also include an “outro” that plays after the viewer clicks a button, serving as a transition between the menu and the selected content.
    An example of an iDVD 6.0 theme with an intro and an outro is Reflection White Main. In this theme, the first drop zones appear in the intro, and the buttons and title appear just before the looping part of the background video. In the outro, everything flies offscreen after the viewer clicks a button.
    iDVD provides tools for viewing these motion menus without going into preview mode, which is especially helpful when you are filling drop zones, and for turning the intro or outro off.
    Here are ways to view and edit the background movie:
    ◼ 
    Drag the diamond-shaped motion playhead along the scrubber bar (shown below), to view the background movie, stopping wherever you like.
    (If you don’t see the motion playhead in iDVD, choose View > Show Motion Playhead.)
    ◼ 
    Deselect the checkboxes at the left and right end of the scrubber bar if you don’t want to use the intro or outro, respectively, in your DVD menu.
    The scrubber bar shows the intro and outro as shaded areas at the beginning and end.
    You can also control the intro and outro from the Menu Info window. With your pointer over the menu (and with no buttons or text objects selected), press Command-I to open that window. Select or deselect the Intro and Outro checkboxes in the Background section of the window.
    NOTE: If you drag your own movie to a motion menu background, the outro is automatically removed. To customize the background and keep the outro, use a still image in the menu background instead of a movie.

  • Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

    Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

    If this happens on monitor 2 of 2, this problem has been solved here:
    http://support.mozilla.com/en-US/questions/794823#answer-157988
    Go to "Firefox"--> "Options" --> "Advanced"
    Then un-check "Use hardware acceleration when available"
    While not verified, I believe this problem is due to an SLI configuration where the focus is on monitor 1. (I.e acceleration is available, but only on monitor 1.)

  • As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000  photograph were not catalogued correctly, or hardly at all, so now ov

    As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000  photograph were not catalogued correctly, or hardly at all, so now over several months time my photos have apparently been redirected in my libraries and have begun not appearing in their allotted frames next to their number in the library they are in. they also have a small question mark (?) next to the photo space. The frames are blank but indicates that there is a photo there. The majority of photos are blank but about a tenth are seen . i apparently need to retrace where they went but do not know how to get that done . can someone help please?

    It would be difficult to tell you where to begin. If you moved photos around to different folders and didn't use Lightroom to move them, that would cause Lightroom to lose track of where they are. You have to remember that your images are not "in" Lightroom. Lightroom simply points to them wherever they are on your computer. All of the location information as well as the changes that you make to your images is stored in the catalog, which is a database. This catalog is central to the operation of Lightroom, and it's essential that you understand how it works and how to make it work for you. For all of those images that have "?" On them, or the folders that have the same, you will have to go through the process of locating them and showing Lightroom where they are located. With 18,000 images, and many of them missing, it might just be easier to start a new catalog and organize things properly from the beginning in that catalog.

  • When I hover over the Bookmark Icon for a few seconds it won't work but when I go straight to the icon and click on it, it will work. Running windows 7

    When I hover over the Bookmark Icon for a few seconds it won’t work but when I go straight to the icon and click on it, it will work. Running Windows 7.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • OSX Lion 10.7.4 issue with Windows shares when renaming folders

    Hi,
    Can anyone tell me if its an known issue when a user logs into a smb share with his AD credentials and when trying to rename a folder which he has permissions to, hes unable to do so and osx prompts for login details. When user enters the correct login it prompts them again and therefore he's unable to rename the folder.
    There are also other folders under the main folder and some of those he's able to rename with no problem so this problem only occurs sometimes.
    AD is on Windows Server 2008 R2 with all updates installed and OSX Lion users also have the latest updates.
    Any help regarding the issue is welcome, thank you!

    I think there's nothing to do with the drive manufacturer,
    I used the macDrive for windows, and format it to HFS(not HFS+)
    Ok,
    Actually I have this folder/files,
    InstallMacOSX.pkg (folder)
    Inside InstallMacOSX.pkg(folder) it has files:
    InstallESD.dmg(using ULTRAISO was burned to dvd)
    This files are NOT included in the burn dvd image:
    Bom
    PackageInfo
    Payload
    Scripts
    This files/folder is outside InstallMacOSX.pkg(folder):
    Distribution(file)
    [TOC].xml(file)
    Resources(folder)
    The original .DMG file was MOsXLeoneDieciSetteDue.dmg(but this is fake, it's a Xar compressed)
    The valid .DMG file is inside the .XAR, so I extracted it, and found those files and folders.
    So, I'll include that in the burned dvd?
    thanks

  • Need Mac download not Windows anyone else have that issue when ordering?

    Need Mac download not Windows anyone else have that issue when ordering?

    Yes! Yes! Yes!
    And you can't complain because this company does not provide anyone to answer these questions and it theft by stealth.
    My Mac order was switched to PC first time so I decided to buy again and this time it just won't download. I get a Jrun Servlett Error page instead.
    This company is shonky
    [email protected]

  • HT1926 When I try to install itunes on my new windows 7 laptop, itunes takes over all my programs. What can I do to install itunes?

    Whenever I try to install itunes on my windows 7 laptop, itunes takes over all my other programs. What can I do?

    First I'd set up a System Restore point. Then try applying the LNK registry fix from the following document:
    File Association Fixes for Windows 7
    Does that get your icons back to normal?

  • Firewire DV output disconnects when I pop over to other programs

    I am brand new to the Mac and brand new to Final Cut Studio, just bought both of them this month. I do After Effects animation and edit the animations with clients in the room, I've been using Premiere on a Windows laptop for years, and I've been told my workflow would benefit if I tried working on a Mac. Now that I'm on a MacBook Pro with Final Cut I've run into an issue.
    Final Cut Pro 5.1.3 seems to be working fine, I'm editing DV video on my 2.33ghz Core2duo 15" MacBook Pro through Firewire to an ADVC DAC-100 analog/digital converter box, out S-Video to a 32" TV for the clients. However, once I pop over to another program, say Photoshop, After Effects, or the Finder, Final Cut's firewire connection is lost, and the TV turns purple, the default DAC-100 behavior when there is no firewire input. (It turns blue when I use my Canon ZR40 instead of the DAC-100.) Once I pop back over to Final Cut Pro, the firewire connection is re-established and my animations are back on the TV. I use several programs in conjunction with the video editor, and I need the firewire connection to remain on so the TV doesn't turn purple every time I jump back into After Effects, Photoshop, etc.
    Final Cut Studio comes with 90 days support, so I called and Apple phone support told me that the way I have things set up is very uncommon and not supported. DV footage out to a Firewire device is not supported? Are you kidding me? The local Apple Store has several Geniuses with Final Cut Pro experience, they told me that the fact that FCP loses firewire connection when I change programs is "pretty much the nature of the beast". They recommended I use a DVI connector to output to S-Video out to the TV, but I'm already using my laptop's DVI to output to my 21 inch monitor, and I will NOT work from my 15" laptop display (or a 17" laptop display for that matter).
    I called phone support again and they told me that if I had a Mac Pro I would have more options, but with a laptop my "special workflow" is not very well supported, unless I stay in Final Cut Pro and not switch programs over to Photoshop or anything else.
    Here is why I feel like I am in the twilight zone: Premiere 6.5 in Windows automatically keeps firewire connection when I pop over to After Effects. Premiere Pro 2.0's default behavior is to lose firewire connection when switching to another program, but I simply unchecked the "Disable video output when Premiere Pro is in the background" checkbox to keep the connection when switching programs. Premiere has been able to do this for years, I have a VERY hard time believing that Final Cut Pro, which is regarded as the BEST video editing program, cannot maintain firewire output unless it is the "in focus" application. I have been through all the preferences, I can't find anything to alter this behavior.
    If I cannot solve this problem with Final Cut Pro, I will need to find a DV/analog firewire box that defaults to BLACK instead of purple when firewire gets disconnected. Please let me know if anyone can tell me the solution to this, I have a VERY hard time believing that editing video on a MacBook Pro while monitoring on a TV through firewire is only supported if I don't pop over to any other programs.
    Thanks in advance for the help, I am already $5,000 into this experiment of trying to do my animation work on a Mac and I will not be happy if I can't get things to work.
    - Bob Wilson
    MacBook Pro 2.33ghz Core 2 Duo 15"   Mac OS X (10.4.8)   3 gigs ram, 160 gig HD

    You're not losing firewire control when you switch over, you are losing the video playback. Even if you were viewing your canvas on your desktop you would still go back to a ragular screen when you switch apps. You would probably have to monkey with your external monitor to adjust how it responds to a lack of signal.

  • Printing issues when printing to Server 2008 R2 Print Server

    We have a problem with netwok printing that encompasses many different areas and versions of Windows OSes so I will be posting this in a few different places.
    Let me lay this out for you. We have a single Server 2008 R2 print server with 300 printers of various models. This print server has both 32 and 64-bit drivers installed for every printer. For the HP printers we are using the HP Universal Printing PCL 6
    (version 61.94.3.37) and for the Ricoh printers we are using their PCL6 driver for universal printing version 3.5. All drivers run in Isolation mode and no printer gets published to AD.
    We have a mix of Windows clients printing to these printers, both XP Pro and Windows 7 32 and 64-bit.
    Now for the problems: The other day one Isolation host on the server went crazy, processing was hitting 100% and memory was fluctuating and growing a lot. After investigating a little that isolation host was having issues accessing the Ricoh Driver (which
    was 3.4 at the time). In an attempt to resolve the issue we updated the driver to V. 3.5. This seemed to fix the isolation issues and things calmed down however this is the beginning of many other issues for the clients. Both Windows OS versions (XP and 7)
    don't seem to be either downloading and installing the updated driver and/or doing so correctly. Clients are now experiencing extremely slow printing, applications such as Word, Outlook, Excel and others open slowly and it can take 2-3 minutes for print dialog
    boxes to open. In all cases it seems that we have to have a tech delete the printer(s), delete the driver and then re-install the printer to make things better but for some reason, which is really unknown, this process doesn't work for every machine and on
    some we can't even remove the old drivers at all without booting into SafeMode and doing it that way.
    With all of that said, are there any suggestions as to why the clients aren't downloading and installing the drivers from the server correctly? How to avoid these issues when we need to upgrade the drivers on the server in the future? Most importantly right
    now, are there any recommendations or scripts on how to force the deletions of the printer, driver, reset the print spoolers and then re-add the printers in a more automated fashion?
    I have played with both wmic, pnputil and printuidll and am trying to put something together but without a set solution that will work consistently it becomes a lot more difficult.

    We are experiencing a very similar issue.
    Windows Server 2008 R2. Printers are deployed over group policy.
    Clients range from Windows 7 to Windows 8. Citrix XenDesktop and XenApp environment also connects to these endpoints.
    We have A wide assortment of HP printers, and Ricoh Printers.
    For the ricoh's we have been historically using the PCL6 drivers for the individual device type (not universal print). Up till recently, it all was working fine, until about some time in the middle of june, when everything just seemed to go crazy.
    The issue was resolved by moving off from the PCL 6 drivers and using the PCL5e driver counterparts on all of our ricoh printers.
    It would crash XenDesktop applications, it would crash office applications.
    The print spooler would lock up, even if the ricoh printers were not actually used, just as long as they were loaded.
    Even after loading PCL5 on the servers, some of the clients would simply not download the PCL5 version of the driver from the print server. In order to resolve this, I have created the steps below. Be advised, this may possibly cause damage on your system.
    We just found it worked great for us. Local printers will likely have to be manually reinstalled after this.
    Directions
    Stop the print spooler
    Open C:\Windows\System32\Spool and delete the following
    All files in SERVERS
    All files in PRINTERS
    All files in drivers
    All files in prtprocs
    Start the print spooler
    Open a command prompt as administrator, and run the following command
    Cscript C:\windows\system32\Printing_Admin_Scripts\en-US\prndrvr.vbs -x
    This should further delete all print drivers.
    Open a command prompt as a standard user (not administrator) and run the following
    Gpupdate
    Now wait. It takes a while, but the printers will slowly start to repopulate.
    I am still not sure what is going on with the PCL6 drivers for ricoh, and why this issue is happening. I'm guessing it has something to do with the Ricoh auto update that is included in their pcl6 drivers. Maybe some sort of auto update happened recently.

  • HT4907 Password Issue when attempting to enable Back to My Mac in iCloud Preferences - HELP?

    Since upgrading to Mountain Lion, I have a problem enabling Back to My Mac. When I try and enable B2MM in the iCloud preferences window, I am asked to enter my Apple ID password. It says the password is incorrect, even though it IS 100% correct. I've even tried resetting my password (so that the password lives up to the latest security requirements for passwords, etc). So, it's definitely correct, and I'm able to login to my Apple account here (on this Apple laptop as well as on my iPad and iPhone)... it's not an issue when I log in anywhere else... I am only told my password is incorrect when attempting to enable Back to My Mac in the iCloud preferences pane.
    Help?
    Many thanks!

    Do these make installation of memeo superfluous? Would I need memeo for daily back up?
    From what I gather, you couldn't pay me to use Memeo, nor actually a Seagate enclosure, nor many USB only drives, (USB is not bootable on PPC Macs).
    I've used maybe a few dozen backup Apps on the Mac, and I'd personally judge only Apple's Time Machine worse than that one.
    If you had it to do all over again, you'd get a case with Firewire, one with an Oxford chipset, not containing a Green Drive, not a Seagate Drive, not less than 7200 RPM drive, & a 32MB Cache, not with a One-Button touch feature, ( not a Bus powered drive like...
    http://eshop.macsales.com/item/Newer%20Technology/MS3S7W20TB32/
    http://eshop.macsales.com/item/Other%20World%20Computing/ME8QW7W20TB/
    I searched hard for answers , not aware of this devoted community. What a wonderful discovery.
    Great to hear & that you found us, tons of devoted, unselfish helpers here too!
    So where are we now on the Drive?
    Does it show up in Disk Utility? Can you repair it there?

  • When I hover over anything on Facebook, it enlarges and takes up half of my screen, HOW DO I STOP THIS HOVER FEATURE ?

    When I hover over a persons name, a pop up of their homepage appears and takes up much of my screen, I DONT LIKE THIS

    Please also check on why there might be multiple plugins of different versions installed in this version.
    This sounds like something enhanced/an accessibility tool in the OS.
    To make sure that this is not a Firefox issue, try Firefox Refresh:
    The Refresh feature (called "Reset" in older Firefox versions) can fix many issues by restoring Firefox to its factory default state while saving your bookmarks, history, passwords, cookies, and other essential information.
    '''''Note:''' When you use this feature, you will lose any extensions, toolbar customizations, and some preferences.'' See the [[Refresh Firefox - reset add-ons and settings]] article for more information.
    To Refresh Firefox:
    # Open the Troubleshooting Information page using one of these methods:
    #*Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''. A new tab containing your troubleshooting information should open.
    #*If you're unable to access the Help menu, type '''about:support''' in your address bar to bring up the Troubleshooting Information page.
    #At the top right corner of the page, you should see a button that says "Refresh Firefox" ("Reset Firefox" in older Firefox versions). Click on it.
    #Firefox will close. After the refresh process is completed, Firefox will show a window with the information that is imported.
    #Click Finish and Firefox will reopen.
    Did this fix the problem? Please report back to us!
    Thank you.

Maybe you are looking for