Peer 2 Peer Recording

Hi,
I've been asked to look into possible call recording solutions for internal Lync calls (Audio only). We already have a recording solution and I'm looking at ways that we could integrate Lync calls into this. We can already record lync calls which go through
the edge server to the PSTN.
What we were hoping to do was to route the call out using an MSPL script to a UCMA application which would then forward the audio onto our recording platform. After reading various articles would I be correct in saying that this isn't currently possible
as the audio will always go point to point and this cannot be changed?
If this is the case then, would I be right in thinking the only way around this would be to forward the call using an MSPL script to a UCMA application which then turns the call into a conference and then forwards the audio onto our recording platform? Can
the audio be forwarded on from this point or does this have to be recorded as a physical file at this point by the UCMA application?
Any help advice would be most appreciated.
Regards
Michael

Generally yes, for any recording solution using UCMA (as opposed to a packet inspection type solution) you'll need to redirect the call using MSPL to a UCMA application, and use a BackToBackCall to connect it to a conference.
At this point, you can do a number of things. You can record the audio to a WMA file using the UCMA Recorder class, or you can join a SIP endpoint belonging to a third-party recording solution to the conference and let that solution take care of recording.
Let me know if this answers your question or if you're looking for more details.
Michael Greenlee | linkedin: http://www.linkedin.com/in/michaelgreenlee | blog: http://blog.greenl.ee

Similar Messages

Windows 8.1 Peer-Peer Network

I've been asked to setup a small network of PC's for a small Charity
They need 10 x PC's with Windows 8.1. No budget for a server
8.1 Pro are more expensive - can I setup 1 PC to host file and the other 9 to connect to that
They also have 3 Notebooks which will need access to the central share and about 3 Printers
As they have limited budget I can't suggest a server (well I have but)
I've not setup Peer-Peer for more than 3-4 users - will this work reliably ?
Is there limit to number pf connections - I seem to remember 10 ?
ChrisS

Hello ChrisS,
Please explain a bit about the following question for better analyzation:
1. Do you want one Windows 8.1 pro as file share server ?
2. Why do you want to use Peer to Peer network?
3. What do you mean about the sentence ‘Is there limit to number pf connections - I seem to remember 10 ?’ What is pf connection?
About the license for Nonprofit, it is recommended to contact the phone support.
For more information, please take a look at the following article.
http://www.microsoft.com/licensing/licensing-options/for-industries.aspx#tab=4
About share folder with someone, please take a look at the following article.
http://windows.microsoft.com/en-hk/windows/share-files-with-someone#1TC=windows-7
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to stream video in peer-peer type app

I am working on creating an IM application and I hope to use flash to stream my audio and video between two clients is there anyway this could be possiable

Is that a Youtube video? If yes, and you would just like to embed it on one of your Muse pages, simply grab the embed code from youtube and paste it through Object -> Insert HTML option.
Thanks,
Vinayak

Help needed gathering information to develope peer-peer chat app

Hi,
I want to develop a chat application to communicate with other computer on my home LAN.
I need to application (which would be installed on all the computers in the network) similar to Novell chat client to show the host name of each computer and should be able to send message any of this computer. The computers are all laptops so they have dynamic IPs.
I don't know where to start and how to go about finding the right resource. If any one could help me i would appreciate it a lot.
Thank you.

Just Google it. You will get lot of informations on chat application.

How to handle DLSw for SDLC and token-ring to same remote peer

We have the need to have SDLC and token-ring connections from one local router to a the same remote site. Currently we have a remote peer for token-ring:
dlsw port-list 10 TokenRing0/0
dlsw remote-peer 10 tcp a.b.c.d lf 1500
We have an SDLC link on a serial port. I understand that SDLC is part of group 0. How do I also get the SDLC traffic to the same remote peer? Is it as simple as adding another remote peer statement to the same IP?
dlsw remote-peer 0 tcp a.b.c.d lf 1500

Do you have your token ring configuration complete to bridge to DLSW ?
for example;
source-bridge ring-group 2000
dlsw local-peer peer-id 150.150.10.1
dlsw remote-peer 0 tcp 150.150.10.2
interface loopback 0
ip address 150.150.10.1 255.255.255.0
interface serial 0
ip address 150.150.11.1 255.255.255.192
interface serial 1
description PU2 with SDLC station role set to secondary
no ip address
encapsulation sdlc
no keepalive
clockrate 9600
sdlc role primary
sdlc vmac 4000.9999.0100
sdlc address 01
sdlc xid 01 05d20006
sdlc partner 4000.1020.1000 01
sdlc dlsw 1
interface serial 2
description Node Type 2.1 with SDLC station role set to negotiable or primary
encapsulation sdlc
sdlc role prim-xid-poll
sdlc vmac 1234.3174.0000
sdlc address d2
sdlc partner 1000.5aed.1f53 d2
sdlc dlsw d2
interface tokenring 0
no ip address
ring-speed 16
source-bridge 100 1 2000
source-bridge spanning
If your SDLC link is working through DLSW (it is in DLSW ring group 10 according to your first configuration statement and port list statement and must match at both ends), it should be an easy modification to add the token ring configuration to join the bridge to the remote DLSW router.
See;
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fibm_c/bcfpart2/bcfdlsw.htm#1003756
best of luck

My NBAR peer-to-peer config

I built a config to rate shape P2P traffic on my network to 30k/s. I thought it would be useful for people who are looking to limit peer-peer traffic inside their company. If you have any additions or other ideas, let me know.
This is on a Cisco 1751 with IOS 12.3(4)T6. Later versions of 12.3 has newer PDLMs so you don't have to download them.
You will need to apply it to a interface by using the "service-policy output" command, also you need to have "ip nbar protocol-discovery" turned on the interface to get statistics.
ip nbar custom bittorrent tcp range 6881 6889
class-map match-any Peer2Peer
description QoS class map for Peer 2 Peer applications
match protocol gnutella
match protocol fasttrack
match protocol kazaa2
match protocol napster
match protocol bittorrent
policy-map Peer2PeerPolicy
description Throttle P2P applications
class Peer2Peer
shape peak 384000

Hi,
How do i apply this class-map to an interface?
If i have a few servers on the same vlan, can i apply it to the vlan instead of the individual switch ports?
Best Regards and thanks for any feedback.
Ezequiel

DLSw Token Ring to Ethernet - Remote Peer MAC

Hi,
Refer to following link, http://www.cisco.com/en/US/partner/tech/tk331/tk336/technologies_configuration_example09186a0080093ecd.shtml
If there is host attached Ring 500 with MAC 0000.1111.0000 (non-canonical) ,another host attached to router B E0, MAC 0000.2222.0000 (canonical)
1) If I configure dlsw mac-address command at router A , should the MAC address configure should change non-canonical ?
2) If I want to configure dlsw mac-address command at router B , is the configure MAC address remain as non-canonical ?
May be you can explain more about the scenerio about when or where to bit swap the MAC address of configuration.
Best Regards.

Hi,
I get confusing. To make it simple I include the config and example.
Assume Token ring host is non-canonical and ethernet host is canonical. Please refer R1 & R2 config at the end.
Regards.
Scenario 1
Token Ring Host ---- R1 ===DLSW=== R2 ----Ethernet Host
(Answer)
XXXX.XXXX.XXXX - should convert to non-canonical
YYYY.YYYY.YYYY - remain non-canonical
Scenario 2
Ethernet Host ---- R1 ====DLSW==== R2 --------Ethernet Host
(Answer)
XXXX.XXXX.XXXX - should convert to non-canonical
YYYY.YYYY.YYYY - should convert to non-canonical
OR ?
XXXX.XXXX.XXXX - remain canonical
YYYY.YYYY.YYYY - remain canonical
which one ??
Best Regards.
R1
dlsw local-peer peer-id 1.1.1.2
dlsw remote-peer 0 tcp 1.1.1.1
dlsw mac-addr XXXX.XXXX.XXXXX remote-peer ip-address 1.1.1.1
R2
dlsw local-peer peer-id 1.1.1.1
dlsw remote-peer 0 tcp 1.1.1.2
dlsw mac-addr YYYY.YYYY.YYYY remote-peer ip-address 1.1.1.2

Lync 2010/2013 - Call Recording with PSTN

I am trying to find out more information about how larger companies use Lync while still recording calls to and from the PSTN. We have a huge need to be able to record specific (not all) calls in an on-demand fashion from the Lync client.
Lync seems to have some strange limitations with what it lets you record.
My issue is that Lync doesn't present options for recording calls to the PSTN unless you convert the call into a conference using some creative "tricks". Has anyone found a better way of doing this so that the user can just select record? It seems
extremely counter productive to say "hey here's our unified product", but if you need this really basic feature of a phone system you need a third party product. None of the third party products I've looked at actually integrate with Lync
in a way that the user just clicks record or some other option.
This is a major limitation of Lync for us and it is really holding up our ability to adopt Microsoft Lync. Does anyone have some good guidance on the best way to do PSTN recording with the Lync client?

Hi,Shaddie,
Yes,Lync doesn't support PSTN call except in a conferencing call,peer-to-peer call recording only works between Lync clients,and if someone call you via PSTN the call recording will not work, check the following links to have a workaround.
http://windowspbx.blogspot.com/2012/05/lync-user-tip-20-how-to-record-lync-to.html
http://blogs.perficient.com/microsoft/2011/02/call-recording-in-lync-2010-pstn-oddity/
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

What is Peer-ID in CDR record

Hi,
Can anyone explain or point me to some documents what exactly is a "Peer-ID" in the CDR (Call Detail Record) of a VoIP call.
Thanks..

That depends on what type of equipement have generated that call detail record. If that is "show call active voice id xxxx command" output, then PeerID is the number of configured incoming or outgoing voice peer. See Cisco IOS Voice Configuration Library here:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/vcl.htm

Is peer to peer recording, (VSTconnection, web session) coming to Logic?

I was at a colleagues yesterday who uses Cubase and he mentioned the VST connection -web session functionality for cubase users.This awesome feature allows you to record people anywhere with internet connection. People downlaod the free app and connect to your studio in real time and control.

Hi Deepak Srivastava,
You can run the following command to enable the feature.
Set-CsconferencingPolicy –Identity Global –EnableP2PRecording $True
Best regards,
Eric

ASA 5505 Site-to-Site VPN to remote dmz access

I don't have a ton of experience with ASA firewalls, but I've searched everywhere and I can't seem to find a solution to this.
I have 2 sites connected by a Site-to-Site VPN with ASAs (5540 on Site 1, 5505 on Site 2). I'm using ASDM.
Lets call:
Site 1 LAN: 192.168.1.0
Site 2 LAN: 192.168.2.0
Site 2 DMZ: 172.16.2.0
Traffic from Site 1 to Site 2 is perfect moving across the LANs. My workstation (192.168.1.10) can ping anything in site 2s LAN (192.168.2.0/24).
Recently, I added a UniFi WAP device to Site 2 DMZ. Since I want to be able to manage this DMZ WAP from the LAN with a management server, I created a network object in Site 2s ASA. I called this object DMZ_WAP. IP address 172.16.2.2. I checked the box for "Add Automatic Address Translation Rules" and configured Type to "Static" and Translated Addr to "192.168.2.8." Source interface DMZ to Any destination interface. This of course created 2 "Network Object" NAT rules.
I then created a DMZ incoming rule that says Source: DMZ_WAP, Destination: net_site1_lan (this object was of course created for the site to site vpn), allow all IP traffic. I created an Outside incoming rule that says net_site1_lan can access DMZ_WAP.
Awesome, I can now ping 192.168.2.8 from anywhere within Site 2. The problem is... I can't ping 192.168.2.8 from my workstation in site 1 (192.168.1.10). If I run Packet Tracer (interface dmz, packet type TCP, source 172.16.2.2 port "echo", destination 192.168.1.10 port "echo") everything turns up green checkmark, the packet is allowed. So why do I have no contact?
I apologize, as I realize ASDM isnt what most of you probably use. But anyone have any ideas? Been researching this for about 4 hours now, perhaps I'm barking up the wrong tree.
Thanks,
Garrick

Here's my sanitized config. Any help would be greatly appreciated. Again, the point is simply to make the object SITE2_DMZ_WAP that is off of the "dmz" interface talk with SITE1 over the site to site VPN. I can't let any other traffic through except this one IP. I currently have it NATd.
ASA Version 8.4(1)
no names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.21.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address -OMITTED- 255.255.255.248
interface Vlan3
no forward interface Vlan1
nameif dmz
security-level 50
ip address 172.16.21.1 255.255.255.0
interface Ethernet0/0
description Outside WAN1 port
switchport access vlan 2
interface Ethernet0/1
description Inside LAN port
interface Ethernet0/2
description Inside LAN port
interface Ethernet0/3
description Outside DMZ port
switchport access vlan 3
interface Ethernet0/4
description Outside DMZ port
switchport access vlan 3
interface Ethernet0/5
description Outside DMZ port
switchport access vlan 3
interface Ethernet0/6
description Outside DMZ port
switchport access vlan 3
interface Ethernet0/7
description Outside DMZ port
switchport access vlan 3
boot system disk0:/asa841-k8.bin
ftp mode passive
clock timezone
clock summer-time PDT recurring
dns server-group DefaultDNS
domain-name -OMITTED-
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network net_SITE1_lan
subnet 192.168.1.0 255.255.255.0
object network net_SITE2_lan
subnet 192.168.21.0 255.255.255.0
object network net_SITE1_dmz
subnet 172.16.1.0 255.255.255.0
object network net_SITE2_dmz
subnet 172.16.21.0 255.255.255.0
object network SITE2_DMZ_WAP
host 172.16.21.2
object network 192.168.21.8
host 192.168.21.8
description FOR SITE2 WAP
access-list inside_access_in extended permit ip object net_SITE2_lan any
access-list inside_access_in extended deny tcp any any eq smtp
access-list outside_cryptomap extended permit ip object net_SITE2_lan object net_SITE1_lan
pager lines 24
logging enable
logging buffer-size 16384
logging buffered notifications
logging asdm notifications
no logging message 106015
no logging message 313001
no logging message 313008
no logging message 106023
no logging message 710003
no logging message 106100
no logging message 302015
no logging message 302014
no logging message 302013
no logging message 302018
no logging message 302017
no logging message 302016
no logging message 302021
no logging message 302020
flow-export destination inside 192.168.1.35 2055
flow-export template timeout-rate 1
flow-export delay flow-create 15
mtu inside 1500
mtu outside 1500
mtu dmz 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-643.bin
no asdm history enable
arp timeout 14400
nat (inside,outside) source static net_SITE2_lan net_SITE2_lan destination static net_SITE1_lan net_SITE1_lan
object network obj_any
nat (inside,outside) dynamic interface
object network SITE2_DMZ_WAP
nat (dmz,any) static 192.168.21.8
nat (inside,outside) after-auto source dynamic any interface
nat (dmz,outside) after-auto source dynamic any interface
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 162.227.34.22 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
aaa authentication telnet console LOCAL
aaa authentication serial console LOCAL
aaa authorization exec LOCAL
http server enable
http server idle-timeout 60
http 192.168.0.0 255.255.0.0 inside
http 0.0.0.0 0.0.0.0 outside
snmp-server host inside 192.168.1.35 community ***** version 2c
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto map CMAP_OUTSIDE 1 match address outside_cryptomap
crypto map CMAP_OUTSIDE 1 set peer -PEER OMITTED-
crypto map CMAP_OUTSIDE 1 set ikev1 transform-set ESP-AES-128-SHA
crypto map CMAP_OUTSIDE 1 set reverse-route
crypto map CMAP_OUTSIDE interface outside
crypto ikev1 enable outside
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 192.168.0.0 255.255.0.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 60
ssh version 2
console timeout 60
management-access inside
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd dns 192.168.2.2 192.168.1.6 interface inside
dhcpd lease 34000 interface inside
dhcpd domain -DOMAIN OMITTED- interface inside
dhcpd update dns both interface inside
dhcpd address 172.16.21.100-172.16.21.200 dmz
dhcpd dns 8.8.8.8 8.8.4.4 interface dmz
dhcpd lease 34000 interface dmz
dhcpd enable dmz
priority-queue outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server -NTP SERVERS OMITTED-
ntp server -NTP SERVERS OMITTED-
webvpn
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
vpn-tunnel-protocol ikev1
username -OMITTED- password -OMITTED- encrypted privilege 15
tunnel-group -IP OMITTED- type ipsec-l2l
tunnel-group -IP OMITTED- general-attributes
default-group-policy GroupPolicy1
tunnel-group -IP OMITTED- ipsec-attributes
ikev1 pre-shared-key *****
isakmp keepalive threshold 10 retry 5
class-map netflow-export-class
match any
class-map inspection_default
match default-inspection-traffic
class-map QoS_RDP
match access-list QoS_RDP_Server_Branch
class-map QoS_EA
match port tcp eq 2000
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns
inspect ftp
inspect http
inspect icmp
inspect icmp error
inspect ils
inspect ip-options
inspect ipsec-pass-thru
inspect pptp
inspect rsh
inspect rtsp
inspect sip
inspect snmp
inspect xdmcp
class netflow-export-class
flow-export event-type all destination 192.168.1.35
class QoS_RDP
priority
class QoS_EA
priority
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Logoff

Windows 7 Backup error code 0x81000039

Hi Everyone,
I was trying to perform a backup across our peer-peer network from a Windows 7 computer to an XP Pro computer. The user has full access to the additional harddrive on the XP computer, but I get error code 0x81000039, remote share path not available. I believe this was towards the end of the backup, but I was not watching it the full time. Any suggestions?

Hello Arthur,
I would suspect it is a network issue too, but I tried this a total of 5 times, 3 of them resulting in the network error. I do not remember what one of the errors was, but I know the other error was a “Only one image is allowed on this drive” type error. At this point I tried one last time and it was after restarting both computers, logging in, waiting till both systems were idle, and then creating a new folder on the remote drive so that there would be no more, "Only one image" errors. I had no problems creating the new folder, Jason7, on the remote drive. This is the same network drive that I use to backup this computer when it had Vista on it.
Unfortunately I am not physically located in the facilities so trying a crossover cable is a little more than difficult at this time. :)
Just out of curiosity I tried it on two computers running Windows 7 RC here at my house. I have the same network type setup and addressing as at the office. I was able to successfully complete a backup from my laptop to my home desktop, so that was no help in figuring out this problem.
It did actually put almost 19GB of zip files on the network backup location. This happened all three times when I got the network error. Also both computers have battery backup as well as the network switch, router, and modem so power kicking out would not have been the problem. None of the UPS’s recorded any spikes, noise or anything. It appears to be a problem at the end of the backup and whatever process it is doing near the end of the backup.
I was able to upload the last three tries log files to Soudamini yesterday and today he said he would be getting back with me.
Anything you can think of I can try remotely?
Best regards,
Frederick C. Frahm

LAN settings for HP LaserJet 500 Color MFP M575: printing OK, network access NO

Printing OK but Network access NOI have a M575 in office LAN.IP 169.254.204.142Subnet 255.255.255.000Router 169.254.204.1Other computers 169.254.204.2-100Everything was good. But couple days ago I was not able to connect to my HP from browser. I was check settings and: IP address on screen HP - 0.0.0.0 I can printing on my HP!!! (destination of printing is: HPLaserJet500ColorMFPM575)but can’t to change settings. I can't change IP adres in JETDIRECT printer's menu. In command prompt PING of 169.254.204.142 is OK… Hand settings IP on start (1/8 click ), searching in administrative menu, cold reset… nothing I don’t know what I can to do else.

This is my IPConfig screen:C:\>IPConfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : T420
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Peer-Peer
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Bluetooth Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
#2
Physical Address. . . . . . . . . : 60-D8-19-D8-A4-3B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection 6:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connecti
on
Physical Address. . . . . . . . . : 00-21-CC-66-CA-38
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::385f:1def:62ae:8cd5%75(Preferred)
IPv4 Address. . . . . . . . . . . : 169.254.204.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 29 xxxxxxxxxxx 2015 15:25:46
Lease Expires . . . . . . . . . . : 30 xxxxxxxxxxx 2015 15:25:46
Default Gateway . . . . . . . . . : 169.254.204.1
DHCP Server . . . . . . . . . . . : 169.254.204.1
DHCPv6 IAID . . . . . . . . . . . : 1610621388
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-69-54-50-00-1E-37-1A-5A-E8
DNS Servers . . . . . . . . . . . : fe80::5ef9:6aff:fedf:5f3b%75
169.254.204.1
169.254.204.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6205
Physical Address. . . . . . . . . : A0-88-B4-D2-3E-B0
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 57:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{32EA8AA7-0304-411D-9B3C-9BE6D6E53F7D}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 135:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{0E880DF2-FD27-4BF8-BBD9-EA726316C1FE}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{FFBD17DC-A12B-469A-8135-C63D9BBEBB31}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #6
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\>

Can we build equity and acquire assets without banks while rebuilding credit??

Hi.Thank you for taking a look at my post. I hope we can help each other. I have 3 goals for this post. 1 - to reach out to this community for opinions, leads, and hopefully contact info for private lenders who really do lend based on the asset and not focus on our marred credit. 2 - maybe members (and of course me) can find someone else on this site who is/are in similar situations and can put resources together to start making lots of money without the banks. 3 - just being honest...I simply need to vent my frustrations in a safe environment where I'm sure there are others who can relate :-) I am getting back into real estate fix & flip, rehab after several years of life altering events and recuperating from personal injuries. I am not an agent or anything like that. I'm just really good at finding and negotiating awesome deals that I end up having to flip. I've worked my butt off to save and purchased one here and there but I need to find funding to get to the next level. I joined this site because my credit is in repair and I'm working the information I read about in this forum. Having gone from a high level of success to wondering how I was going to get from the bedroom to the bathroom, I feel like this is the one place I can trust to put myself out there and get meaningful, non-judgmental peer-peer responses with solid pertinent information. Hence why I could use some opinions and hope to get some leads on lenders that might help me out. With several properties under contract, I'll have to flip to other buyers at discounted values if I can't find a lender. I've spoken with about 20 lenders who claim they are "private", "hard money", "Asset-based" commercial loans, investor driven, bad credit, blah...blah...blah...only to find out they really are just like dealing with a bank. I am not claiming to have great credit and I realize on paper I look pretty weak. However, the whole time they are making claims they are not credit driven...what do you think the first thing they want is...yup...credit scores! Even though the numbers of the asset are very strong and purchased in an LLC. They all require full doc personal financials...the whole time they are saying they don't really judge you on credit....RIGHT! While these "direct lenders" and "private money lenders" may not have to work under the federal bank lending regulations, THEY are not interested in anyone who doesn't meet THEIR rigid requirements. Which in reality are exactly the same as the regular banks. I have yet to find one lender that truly bases their decisions on the property asset without pulling credit, bank statements, etc. They all will only lend a portion of what is needed (50 -75% LTV or LTC )based on the lowest value they can determine (Purchase price or appraisal which ever is lower) which means they have essentially no risk and the investor has to bring in a lot of cash. No difference. They are essentially all the same and just boast about being different. This is all fine if that is how they run their business. I am the last to judge them for that. However, I am tired of wasting my time talking to company after company making these claims but really won't put their money where their mouth is!! I have also looked into a lot of the sites for peer-peer funding. In general they are all fantastic and serve a great purpose. Especially for kids and fundraising purposes. But I'm working on a business. On those sites, you really have to put your self out there on the front line and air your dirty laundry to the world in order to participate. I realize I could do that and tell my sad story and why I want people to invest in me and my project. Frankly, maybe I'm too proud or going about this all wrong but I'm just not ready to post my story to the world and ask my friends and family for handouts. I don't want people feeling sorry for me or my name all over the internet telling people my credit sucks (even though it isn't that bad now). Let's be honest - who posts on a peer-peer funding site for their own benefit if you have your financial life in order!! That said, I'm sure none of us would be on this site if we didn't have or have had financial turmoil in our lives. Who cares why.. it happens. Hopefully, we all realize that is not what defines us as people and we can all achieve our dreams like any one else. It just might take longer, or a bit more work. You get the picture. So I thought, what if others on this site are experiencing the same things. Do you feel like you are missing out on opportunities to make your money grow? Maybe you have improved your credit but don't have enough cash to get a loan. Maybe you can't get a loan because of credit but you have cash. Maybe you can't get a bank account and are missing out on investment opportunities because your money is sitting under your mattress. Seems to me people on this sight are all focused on the same thing and have the best interests of others in sight. We also have this fantastic forum to discuss our money issues and glean insight and information from others that helps us improve our situations. I'm wondering if we could partner up our strengths and find ways to benefit by working together with other like minded members. You thoughts are of great value. Please post.

Are you debt free? Do you have any cash to throw into this? If no... what about subbing out under someone else or getting in GCing or Foreman for a bigger company while you cleanup your personal finances? Real estate is AWESOME, but if you can't cashflow at least a good chunk of it, you can get in a pretty scary spot... What kind of assets do you have? Could you flip your own home and use those monies to invest in your next flip and live as cheap as possible through a few flips until you have a good bit of cash built up?

Problem with Clustering in Oracle AS10.1.3.1.0

I have an Oracle Application Server 10.1.3.1 installed with a multicast IP along with an home instance whcih is an administrative instance. Installed another instance on other system with only J2EE Server installation and having home not as an administrative instance which is basically a Active - Active topology.
Created 2 home instances on the 2 Application Servers with in the same group and deploymed my application in both the instances with Peer-Peer Dynamic Discovery mode. but when i run the application its running fine when i go from the localhost address but when i mention the internal IP or the Public IP of the system session is getting failed. i hope that the request is transferring between the 2 instances when i specify the IP. So i specified the system property -Doracle.j2ee.rmi.loadBalance=client which makes the request to stick to only one instance till its life ends. but this also throws me the same error. And the error is
07/08/26 12:47:08 java.io.StreamCorruptedException
07/08/26 12:47:08      at java.io.ObjectInputStream.readTypeString(ObjectInputStream.java:1372)
07/08/26 12:47:08      at java.io.ObjectStreamClass.readNonProxy(ObjectStreamClass.java:607)
07/08/26 12:47:08      at java.io.ObjectInputStream.readClassDescriptor(ObjectInputStream.java:778)
07/08/26 12:47:08      at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1528)
07/08/26 12:47:08      at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1460)
07/08/26 12:47:08      at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1693)
07/08/26 12:47:08      at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1299)
07/08/26 12:47:08      at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1912)
07/08/26 12:47:08      at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1836)
07/08/26 12:47:08      at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1713)
07/08/26 12:47:08      at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1299)
07/08/26 12:47:08      at java.io.ObjectInputStream.readObject(ObjectInputStream.java:339)
07/08/26 12:47:08      at com.evermind.server.ejb.EJBInputStream.readSession(EJBInputStream.java:263)
07/08/26 12:47:08      at com.evermind.server.ejb.EJBInputStream.readSession(EJBInputStream.java:185)
07/08/26 12:47:08      at com.oracle.bricks.j2ee.EJBLiveSession.unmarshall(EJBLiveSession.java:228)
07/08/26 12:47:08      at com.oracle.bricks.j2ee.EJBSessionFacade.unmarshall(EJBSessionFacade.java:95)
07/08/26 12:47:08      at com.evermind.server.ejb.JGroupEJBService.requestSession(JGroupEJBService.java:193)
07/08/26 12:47:08      at com.evermind.server.ejb.StatefulSessionEJBHome.getSession(StatefulSessionEJBHome.java:670)
07/08/26 12:47:08      at com.evermind.server.ejb.StatefulSessionEJBHome.getSession(StatefulSessionEJBHome.java:653)
07/08/26 12:47:08      at com.evermind.server.ejb.StatefulSessionEJBHome.getSession(StatefulSessionEJBHome.java:648)
07/08/26 12:47:08      at com.evermind.server.ejb.StatefulSessionEJBHome.getRemoteSession(StatefulSessionEJBHome.java:686)
07/08/26 12:47:08      at com.evermind.server.ejb.StatefulSessionHandle.getEJBObject(StatefulSessionHandle.java:40)
07/08/26 12:47:08      at ezc.client.EzcUtilManager.<init>(EzcUtilManager.java:30)
07/08/26 12:47:08      at ezcommerce.ezLoginUser._jspService(_ezLoginUser.java:259)
07/08/26 12:47:08      at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
07/08/26 12:47:08      at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
07/08/26 12:47:08      at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
07/08/26 12:47:08      at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
07/08/26 12:47:08      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
07/08/26 12:47:08      at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
07/08/26 12:47:08      at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
07/08/26 12:47:08      at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
07/08/26 12:47:08      at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
07/08/26 12:47:08      at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
07/08/26 12:47:08      at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
07/08/26 12:47:08      at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
07/08/26 12:47:08      at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
07/08/26 12:47:08      at java.lang.Thread.run(Thread.java:595)
Please kindly someone help me in this regard....
Thanks in advance
Satya

Vander,
Please open a support request if you can. It will allow us to track this important issue better and provide us a channel in case we need to see you JDev files.
Doug

Peer 2 Peer Recording

Similar Messages

Maybe you are looking for