PeopleSoft HRMS 8.3 with Oracle 9i DBMS upgrading to Oracle 10g DBMS?

Has anybody else gone down this path? We are testing under Oracle 10g, and experiencing performance issues. Thanks,
Rich
[email protected]

We successfully followed the same path upgrade recently, no particular issue (except some tunning has to be done), you should absolutely read the red paper on MOS :
PeopleSoft Enterprise Performance on Oracle 10g Database ID 747254.1+
Nicolas.

Similar Messages

Problem with Application Login after upgrading to Oracle 11g

I have a home-grown application with Oracle 10g database running under Windows XP Pro. Recently, I installed Oracle 11g and imported the application database from 10g to 11g (still want to keep the 10g running for a while). However, I now having problem with the application logging into the new 11g database. (Keep getting invalid user/name message).
BTW, I have no problem accessing the 11g database through SQLPlus (logging in with the same name and password that I use for the application), and the connection test of NetManager (again using the same name and password that I use for the application) was successful.
The application itself uses the old Borland BDE (Borland Database Engine) to access the 10g and 11g database. Testing confirms that BDE can access Oracle 11g with no problems.
Any idea about the probable cause(s) of the problem?
Thanks in advance,
sg2000

11g by default is case sensitive username/password.
You can disable that with setting parameter SEC_CASE_SENSITIVE_LOGON to false.
SQL> SHOW PARAMETER SEC_CASE_SENSITIVE_LOGON
SQL> ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE;

PeopleSoft HRMS w/ Oracle 8i database

I would like to know the following from any DBAs out there:
We are using PeopleSoft HRMS 7.5 with Oracle 8i on Sun Solaris
2.6. We have a 3 tier architecture.
My questions are regarding user authentication. In yur shops are
the users authenticated at the database level also. Iunderstand
that with PeopleSoft's architecture only dummy accounts are
created in Oracle, by which you connect and disconnect to the
database. I am not sure I understand this.
Also is the OPS$ORacle account used widely. You can only use this
account if you are logged on the ORacle UNIX account. How risky
is not disabling this account if you have turned off remote
authentication.
Thanks

Hi,
sorry, I can't see your detailled questions. I'll try some answers:
PeopleSoft/3-Tier/Oracle-dummy-user:
When you login into PeopleSoft application, you have an account
with username, password. Within the PS application you have
role(s) and fine granulated rights to do or not to do, e.g. open
panels, change data, create/change/delete other accounts and so
on. The roles and rights are all managed within the PeopleSoft
application. All informations concerning roles/rights/accounts...
are stored in the database, but managed by the PS application.
The PS middle-tier (application server) makes and holds
connections to the underlying database only by one or two
database user accounts (people and sysadm). These user(s) have
rights on all PS tables a.s.o.
OPS$ account:
As far as I know, when using OPS$ account but remote
authentication turned off, the only "risk" is that a user with
the corresponding server account (OPS$test => unix login "test")
can login without further password into the Oracle database.
Hope this helps,
Thomas.

Database Upgradation from oracle 9.2.0.8 to oracle11gR2

Hi
we are using AIX 5.3 TL 10 SP4 and we are upgrading DB from oracle9.2.0.8 to oracle 11.2.0.2
i am having some doubt from below pre-upgrade scripts out put.
oratst@ebsdevdb on /tmp # sqlplus "/as sysdba"
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Jul 4 10:11:48 2011
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
SQL> spool 11202_upgrade.txt
SQL> @utlu112i.sql
Oracle Database 11.2 Pre-Upgrade Information Tool 07-04-2011 10:17:06
Script Version: 11.2.0.2.0 Build: 001
Database:
--> name: EBSTEST
--> version: 9.2.0.8.0
--> compatible: 9.2.0
--> blocksize: 8192
--> timezone file: V1
Logfiles: [make adjustments in the current environment]
--> The existing log files are adequate. No changes are required.
Tablespaces: [make adjustments in the current environment]
--> SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 8546 MB
--> TOOLS tablespace is adequate for the upgrade.
.... minimum required size: 8 MB
--> TEMP tablespace is adequate for the upgrade.
.... minimum required size: 61 MB
--> AR_TABLE tablespace is adequate for the upgrade.
.... minimum required size: 33497 MB
--> FND_TABLE tablespace is adequate for the upgrade.
.... minimum required size: 45447 MB
--> AMVD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> ASOD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> CCTD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> IBUD tablespace is adequate for the upgrade.
.... minimum required size: 1 MB
--> IEMD tablespace is adequate for the upgrade.
.... minimum required size: 5 MB
--> IEOD tablespace is adequate for the upgrade.
.... minimum required size: 4 MB
--> JTFD tablespace is adequate for the upgrade.
.... minimum required size: 135 MB
--> OKCD tablespace is adequate for the upgrade.
.... minimum required size: 34 MB
--> XDPD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> XNPD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> APPS_UNDOTS1 tablespace is adequate for the upgrade.
.... minimum required size: 849 MB
Update Parameters: [Update Oracle Database 11.2 init.ora or spfile]
Note: Pre-upgrade tool was run on a lower version 64-bit database.
--> If Target Oracle is 32-Bit, refer here for Update Parameters:
WARNING: --> "compatible" must be set to at least 10.1.0
--> If Target Oracle is 64-Bit, refer here for Update Parameters:
WARNING: --> "compatible" must be set to at least 10.1.0
WARNING: --> "shared_pool_size" needs to be increased to at least 532 MB
WARNING: --> "java_pool_size" needs to be increased to at least 128 MB
Renamed Parameters: [Update Oracle Database 11.2 init.ora or spfile]
-- No renamed parameters found. No changes are required.
Obsolete/Deprecated Parameters: [Update Oracle Database 11.2 init.ora or spfile]
--> optimizer_max_permutations 10.1 OBSOLETE
--> row_locking 10.1 OBSOLETE
--> undo_suppress_errors 10.1 OBSOLETE
--> max_enabled_roles 10.1 DEPRECATED
--> enqueue_resources 10.2 OBSOLETE
--> sql_trace 10.2 DEPRECATED
--> background_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
--> user_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
Components: [The following database components will be upgraded or installed]
--> Oracle Catalog Views [upgrade] VALID
--> Oracle Packages and Types [upgrade] VALID
--> JServer JAVA Virtual Machine [upgrade] VALID
--> Oracle XDK for Java [upgrade] VALID
--> Real Application Clusters [upgrade] INVALID
--> Oracle Text [upgrade] VALID
--> Oracle XML Database [install]
--> Oracle Java Packages [upgrade] VALID
--> Oracle interMedia [upgrade] VALID
--> Spatial [upgrade] VALID
Miscellaneous Warnings
WARNING: --> Passwords exist in some database links.
.... Passwords will be encrypted during the upgrade.
.... Downgrade of database links with passwords is not supported.
WARNING: --> Deprecated CONNECT role granted to some user/roles.
.... CONNECT role after upgrade has only CREATE SESSION privilege.
WARNING: --> Database is using a timezone file older than version 14.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 9.2.0.8.0 database timezone version
.... to the latest version which comes with the new release.
WARNING: --> Database contains INVALID objects prior to upgrade.
.... The list of invalid SYS/SYSTEM objects was written to
.... registry$sys_inv_objs.
.... The list of non-SYS/SYSTEM objects was written to
.... registry$nonsys_inv_objs.
.... Use utluiobj.sql after the upgrade to identify any new invalid
.... objects due to the upgrade.
.... USER ADWANIAH has 1 INVALID objects.
.... USER APPS has 34 INVALID objects.
.... USER CHAKKACHANSA has 1 INVALID objects.
.... USER FA_USER has 9 INVALID objects.
.... USER SYSSEL has 2 INVALID objects.
.... USER SYSTEM has 30 INVALID objects.
.... USER XXITDFINAD has 7 INVALID objects.
WARNING: --> SYSTEM schema default tablespace has been altered.
.... The SYSTEM schema default tablespace is currently set to TOOLS.
.... Prior to upgrading your database please reset the
.... SYSTEM schema default tablespace to SYSTEM using the command:
.... ALTER USER SYSTEM DEFAULT TABLESPACE SYSTEM;
WARNING: --> Database contains schemas with objects dependent on DBMS_LDAP package.
.... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
.... USER APPS has dependent objects.
Recommendations
Oracle recommends gathering dictionary statistics prior to
upgrading the database.
To gather dictionary statistics execute the following commands
while connected as SYSDBA:
EXECUTE dbms_stats.gather_schema_stats('CTXSYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('DBSNMP',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('MDSYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('ORDPLUGINS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('ORDSYS',options=>'GATHER'
estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('OUTLN',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('SYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('SYSTEM',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
Oracle recommends removing all hidden parameters prior to upgrading.
To view existing hidden parameters execute the following command
while connected AS SYSDBA:
SELECT name,description from SYS.V$PARAMETER WHERE name
LIKE '\_%' ESCAPE '\'
Changes will need to be made in the init.ora or spfile.
Oracle recommends reviewing any defined events prior to upgrading.
Changes will need to be made in the init.ora or spfile.
Oracle recommends reviewing any defined events prior to upgrading.
To view existing non-default events execute the following commands
while connected AS SYSDBA:
Events:
SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
WHERE UPPER(name) ='EVENT' AND isdefault='FALSE'
Trace Events:
SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2
WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
Changes will need to be made in the init.ora or spfile.
SYSAUX Tablespace:
[Create tablespace in the Oracle Database 11.2 environment]
--> New "SYSAUX" tablespace
.... minimum required size for database upgrade: 500 MB
From above output script
1)SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 8546 MB
From system tablespace minimum required size means free space from system tablespace or total size of system tablespace?
i am going to use dbua utility for upgrade means does it alter tablespace as per output of scripts or we need to manually alter tablespace size as per requirement?
2)WARNING: --> Database contains schemas with objects dependent on DBMS_LDAP package.
.... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
.... USER APPS has dependent objects.
what is above warning and how can i configure ACL's for APPS User?
Thanks
With Regards
A-Z

Hi
oratst@ebsdevdb on /ebdbh/11g/data/cfgtoollogs/dbua/ebstest/upgrade1 # more Upgrade_Directive.log
Connected.
ODMA_DIRECTIVE:VERSION:9.2.0.8
ODMA_DIRECTIVE:MIGRATE_SID:
ODMA_DIRECTIVE:ORA:IGNORE:06512:
ODMA_DIRECTIVE:ORA:FATAL:00600:
ODMA_DIRECTIVE:ORA:FATAL:01012:
ODMA_DIRECTIVE:ORA:FATAL:01031:
ODMA_DIRECTIVE:ORA:FATAL:01034:
ODMA_DIRECTIVE:ORA:FATAL:01078:
ODMA_DIRECTIVE:ORA:FATAL:01092:
ODMA_DIRECTIVE:ORA:FATAL:01109:
ODMA_DIRECTIVE:ORA:FATAL:01119:
ODMA_DIRECTIVE:ORA:FATAL:01507:
ODMA_DIRECTIVE:ORA:FATAL:01722:
ODMA_DIRECTIVE:ORA:FATAL:03113:
ODMA_DIRECTIVE:ORA:FATAL:03114:
ODMA_DIRECTIVE:ORA:FATAL:07445:
ODMA_DIRECTIVE:ORA:FATAL:12560:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01650:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01651:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01652:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01653:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01654:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01655:
ODMA_DIRECTIVE:ORA:RECOVER_ROLL:01562:
ODMA_DIRECTIVE:ORA:RECOVER_INIT:04031:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:rdbms/admin/catupgrd.sql:
ODMA_DIRECTIVE:BOUNCE_DATABASE:UPGRADE:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:rdbms/admin/catuppst.sql:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:sqlplus/admin/help/hlpbld.sql helpus.sql:
Thanks
With Regards
A-Z

Steps to upgrade my Oracle version from 11.1.0.6 to 11.2.0.1 in windows.

Can anyone help me with the steps to upgrade my Oracle version from 11.1.0.6 to 11.2.0.1 in windows.
Thanks in advance.

If you are going to upgrade, you should upgrade to the latest 11gR2 patchset (currently 11.2.0.4). At a high level -
1. Install 11.2.0.4 into a new separate ORACLE_HOME - see MOS Doc 1562139.1 and Contents
2. Apply the latest 11.2.0.4 PSU bundle available for Windows - see MOS Doc 1454618.1
3. Use DBUA to perform the upgrade - MOS Doc 870814.1 and Contents
Also see
MOS Doc 1645862.1

Solve oracle multimedia post upgrade errors

Hello,
I performed and out of place upgrade from oracle 10.2.0.4 to 11.2.0.4.
when I run the postupgrade script i have issues on oracle multimedia that i cannot solve.. it is about shared memory. I followed all the recommendations suggested on the pre-upgrade script.
SQL> @/oracle/product/11.2.0.4/dbhome_1/rdbms/admin/utlu112s.sql
Oracle Database 11.2 Post-Upgrade Status Tool           10-03-2014 15:06:57
Component                               Current      Version     Elapsed Time
Name                                    Status       Number      HH:MM:SS
Oracle Server
.                                         VALID      11.2.0.4.0 00:14:07
JServer JAVA Virtual Machine
.                                         VALID      11.2.0.4.0 00:11:08
Oracle Workspace Manager
.                                         VALID      11.2.0.4.0 00:00:48
Oracle Enterprise Manager
.                                         VALID      11.2.0.4.0 00:09:58
Oracle XDK
.                                         VALID      11.2.0.4.0 00:02:48
Oracle Text
.                                         VALID      11.2.0.4.0 00:00:59
Oracle XML Database
.                                         VALID      11.2.0.4.0 00:05:45
Oracle Database Java Packages
.                                         VALID      11.2.0.4.0 00:00:20
Oracle Multimedia
.   ORA-00604: error occurred at recursive SQL level 1 ORA-04031: unable to
allocate 32 bytes of shared memory ("shared pool","select col#, grantee#,
privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at
"SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
.   ORA-04031: unable to allocate 32 bytes of shared memory ("shared
pool","select col#, grantee#,
privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at
"SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
.   col#, grantee#, privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
.   ORA-06512: at "SYS.DBMS_JAVA", line 655 ORA-06512: at line 1
.   ORA-06512: at line 1
.   ORA-00604: error occurred at recursive SQL level 1 ORA-04031: unable to
allocate 136 bytes of shared memory ("shared pool","select
i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds: qksmmGetWorkArea")
ORA-06512:
at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
.   ORA-04031: unable to allocate 136 bytes of shared memory ("shared
pool","select i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds:
qksmmGetWorkArea")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
.   i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds: qksmmGetWorkArea")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
.   ORA-06512: at "SYS.DBMS_JAVA", line 655 ORA-06512: at line 1
.   ORA-06512: at line 1
.   ORA-04045: errors during recompilation/revalidation of
ORDSYS./f87ac59f_DicomEngine
ORA-04031: unable to allocate 32 bytes of shared
memory ("shared pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
.   ORDSYS./f87ac59f_DicomEngine ORA-04031: unable to allocate 32 bytes of
shared memory ("shared pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
.   ORA-04031: unable to allocate 32 bytes of shared memory ("shared
pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
.   JAVA CLASS "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 276 ORA-06512: at line 1
.   ORA-06512: at line 1
.   ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 14805
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 14805
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 14805
.   ORA-06512: at line 14805
.   ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 67
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 67
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 67
.                                       INVALID      11.2.0.4.0 00:55:05
Spatial
.                                    OPTION OFF      10.2.0.4.0 00:00:00
Oracle Expression Filter
.                                         VALID      11.2.0.4.0 00:00:16
Oracle Rules Manager
.                                         VALID      11.2.0.4.0 00:00:14
Final Actions
.                                                                00:01:34
Total Upgrade Time: 01:43:11
PL/SQL procedure successfully completed.
thank you
Mario.

I explicity set up the sga_target to 668MB as suggested by the pre-upgrade script.
see the output of preugrade tool:
SQL> @/oracle/utlu112i.sql
Oracle Database 11.2 Pre-Upgrade Information Tool 10-02-2014 17:24:25
Script Version: 11.2.0.4.0 Build: 001
Database:
--> name:          FUELPLUS
--> version:       10.2.0.4.0
--> compatible:    10.2.0.3.0
--> blocksize:     8192
--> platform:      Solaris Operating System (x86-64)
--> timezone file: V4
Tablespaces: [make adjustments in the current environment]
--> SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 1071 MB
--> UNDOTBS1 tablespace is adequate for the upgrade.
.... minimum required size: 400 MB
--> SYSAUX tablespace is adequate for the upgrade.
.... minimum required size: 804 MB
--> TEMP tablespace is adequate for the upgrade.
.... minimum required size: 60 MB
Flashback: OFF
Update Parameters: [Update Oracle Database 11.2 init.ora or spfile]
Note: Pre-upgrade tool was run on a lower version 64-bit database.
--> If Target Oracle is 32-Bit, refer here for Update Parameters:
WARNING: --> "sga_target" needs to be increased to at least 484 MB
--> If Target Oracle is 64-Bit, refer here for Update Parameters:
WARNING: --> "sga_target" needs to be increased to at least 668 MB
Renamed Parameters: [Update Oracle Database 11.2 init.ora or spfile]
-- No renamed parameters found. No changes are required.
Obsolete/Deprecated Parameters: [Update Oracle Database 11.2 init.ora or spfile]
--> cursor_space_for_time        11.1       DEPRECATED
--> background_dump_dest         11.1       DEPRECATED   replaced by "diagnostic_dest"
--> user_dump_dest               11.1       DEPRECATED   replaced by "diagnostic_dest"
--> cursor_space_for_time        11.2       DEPRECATED
Components: [The following database components will be upgraded or installed]
--> Oracle Catalog Views         [upgrade] VALID
--> Oracle Packages and Types    [upgrade] VALID
--> JServer JAVA Virtual Machine [upgrade] VALID
--> Oracle XDK for Java          [upgrade] VALID
--> Oracle Workspace Manager     [upgrade] VALID
--> EM Repository                [upgrade] VALID
--> Oracle Text                  [upgrade] VALID
--> Oracle XML Database          [upgrade] VALID
--> Oracle Java Packages         [upgrade] VALID
--> Oracle interMedia            [upgrade] VALID
--> Spatial                      [upgrade] VALID
--> Data Mining                  [upgrade] VALID
--> Expression Filter            [upgrade] VALID
--> Rule Manager                 [upgrade] VALID
Miscellaneous Warnings
WARNING: --> Database is using a timezone file older than version 14.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 10.2.0.4.0 database timezone version
.... to the latest version which comes with the new release.
WARNING: --> Database contains INVALID objects prior to upgrade.
.... The list of invalid SYS/SYSTEM objects was written to
.... registry$sys_inv_objs.
.... The list of non-SYS/SYSTEM objects was written to
.... registry$nonsys_inv_objs.
.... Use utluiobj.sql after the upgrade to identify any new invalid
.... objects due to the upgrade.
.... USER PUBLIC has 1 INVALID objects.
WARNING: --> EM Database Control Repository exists in the database.
.... Direct downgrade of EM Database Control is not supported. Refer to the
.... Upgrade Guide for instructions to save the EM data prior to upgrade.
WARNING: --> Your recycle bin is turned on and currently contains no objects.
.... Because it is REQUIRED that the recycle bin be empty prior to upgrading
.... and your recycle bin is turned on, you may need to execute the command:
        PURGE DBA_RECYCLEBIN
.... prior to executing your upgrade to confirm the recycle bin is empty.
WARNING: --> JOB_QUEUE_PROCESS value must be updated
.... Your current setting of "10" is too low.
.... Starting with Oracle Database 11g Release 2 (11.2), setting
.... JOB_QUEUE_PROCESSES to 0 causes both DBMS_SCHEDULER and
.... DBMS_JOB jobs to not run. Previously, setting JOB_QUEUE_PROCESSES
.... to 0 caused DBMS_JOB jobs to not run, but DBMS_SCHEDULER jobs were
.... unaffected and would still run. This parameter must be updated to
.... a value greater than 48 (default value is 1000) prior to upgrade.
.... Not doing so will affect the running of utlrp.sql after the upgrade
Recommendations
Oracle recommends gathering dictionary statistics prior to
upgrading the database.
To gather dictionary statistics execute the following command
while connected as SYSDBA:
    EXECUTE dbms_stats.gather_dictionary_stats;
Oracle recommends reviewing any defined events prior to upgrading.
To view existing non-default events execute the following commands
while connected AS SYSDBA:
Events:
    SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
      WHERE UPPER(name) ='EVENT' AND isdefault='FALSE'
Trace Events:
    SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2
      WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
Changes will need to be made in the init.ora or spfile.
SQL> SPOOL OFF
here are the last 100 lines of upgrade.log
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
.   JAVA CLASS "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 276 ORA-06512: at line 1
.   ORA-06512: at line 1
.   ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 14805
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 14805
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 14805
.   ORA-06512: at line 14805
.   ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 67
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 67
.   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 67
.                                       INVALID      11.2.0.4.0 00:55:05
Spatial
.                                    OPTION OFF      10.2.0.4.0 00:00:00
Oracle Expression Filter
.                                         VALID      11.2.0.4.0 00:00:16
Oracle Rules Manager
.                                         VALID      11.2.0.4.0 00:00:14
Final Actions
.                                                                00:01:34
Total Upgrade Time: 01:43:11
PL/SQL procedure successfully completed.
SQL>
SQL> SET SERVEROUTPUT OFF
SQL> SET VERIFY ON
SQL> commit;
Commit complete.
SQL>
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL>
SQL>
SQL>
SQL> DOC
DOC>#######################################################################
DOC>#######################################################################
DOC>
DOC>   The above sql script is the final step of the upgrade. Please
DOC>   review any errors in the spool log file. If there are any errors in
DOC>   the spool file, consult the Oracle Database Upgrade Guide for
DOC>   troubleshooting recommendations.
DOC>
DOC>   Next restart for normal operation, and then run utlrp.sql to
DOC>   recompile any invalid application objects.
DOC>
DOC>   If the source database had an older time zone version prior to
DOC>   upgrade, then please run the DBMS_DST package. DBMS_DST will upgrade
DOC>   TIMESTAMP WITH TIME ZONE data to use the latest time zone file shipped
DOC>   with Oracle.
DOC>
DOC>#######################################################################
DOC>#######################################################################
DOC>#
SQL>
SQL> Rem Set errorlogging off
SQL> SET ERRORLOGGING OFF;
SQL>
SQL> REM END OF CATUPGRD.SQL
SQL>
SQL> REM bug 12337546 - Exit current sqlplus session at end of catupgrd.sql.
SQL> REM                This forces user to start a new sqlplus session in order
SQL> REM                to connect to the upgraded db.
SQL> exit

Upgrade From Oracle 10.2.0.11 -- Oracle 10.2.0.4 Windows 64 Bit

Hello
I have a very strange issue that developers have come up with .
I upgraded our Oracle 10.2.0.1 64 Bit instance to 10.2.0.4 using p6810189_10204_MSWIN-x86-64 patch . After upgrading every thing works fine except when aggregate function are used like SUM or MAX the query takes ages to complete . Wanted to know if such a scenario was faced earlier.
I was also told to apply patch p8439221_10204_MSWIN-x86-64 when I was doing the initial upgrade which I have not apply , i had time constraints as developers were doing smoke testing for an application. Could this be the reason .
Your help will be much appreciated ,thanks once again .
Regards
Harshad

h_kanchan wrote:
Hello
I have a very strange issue that developers have come up with .Developers are often comming with something.
I upgraded our Oracle 10.2.0.1 64 Bit instance to 10.2.0.4 using p6810189_10204_MSWIN-x86-64 patch . After upgrading every thing works fine except >when aggregate function are used like SUM or MAX the query takes ages to complete . Wanted to know if such a scenario was faced earlier.
I was also told to apply patch p8439221_10204_MSWIN-x86-64 when I was doing the initial upgrade which I have not apply , i had time constraints as >developers were doing smoke testing for an application. Could this be the reason .Propapably not.
Did you traced those 'slow' sessions to see what's exactly happening when they executing ?
>
Your help will be much appreciated ,thanks once again .cheers

Integration with Oracle ESB 10.1.3.1 and Peoplesoft HRMS

We are integrating Oracle ESB with Peoplesoft HRMS using a SOAP service to invoke a Peoplesoft HRMS webservice.
We are facing problems as HRMS application expects parameters - 'To' and 'From' with specific values to be passed in http header in the message from ESB as they are using http listener at their end.
We have tried to configure these parameters as end point properties in the SOAP adaptor but have failed to invoke the webservice at HRMS. They have given us a WSDL file and we have configured the SOAP adaptor with the same.
We get the following error -
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message transmission failure, response code: 500 at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1731) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1473) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeInputOnlyOperation(WSIFOperation_JaxRpc.java:1156) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:865) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:781) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:801) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:208) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:127) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:118) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:95) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1444) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:112) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:305) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispatcher.java:138) at oracle.tip.esb.server.dispatch.DeferredEventDispatcher.processSubscriptions(DeferredEventDispatcher.java:153) at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(EventDispatcher
Any help will be very much appreciated.
Thanks!

Hi,
Using the actual parameters does not work.
Pls find the trace
oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message transmission failure, response code: 500 at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1731) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1473) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeInputOnlyOperation(WSIFOperation_JaxRpc.java:1156) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:865) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:781) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:801) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:208) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:127) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:118) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:95) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1444) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:112) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:305) at
oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispatcher.java:138) at
oracle.tip.esb.server.dispatch.DeferredEventDispatcher.processSubscriptions(DeferredEventDispatcher.java:153) at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(EventDispatcher.java:94) at oracle.tip.esb.server.dispatch.DeferredEventDispatcher.dispatch(DeferredEventDispatcher.java:69) at oracle.tip.esb.server.dispatch.agent.JavaDeferredMessageHandler.handleMessage(JavaDeferredMessageHandler.java:138) at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:181) at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:135) at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242) at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215) at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814) at java.lang.Thread.run(Thread.java:595) ". at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:979) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:781) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:801) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:208) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:127) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:118) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:95) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1444) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:112) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:305) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispatcher.java:138) at oracle.tip.esb.server.dispatch.DeferredEventDispatcher.processSubscriptions(DeferredEventDispatcher.java:153) at orac
Thanks,

Installing PeopleSoft HRMS 9.0 on Windows Server 2008 with SQL Server 2008

Hi there,
Recently I was involved to develop a POC with PeopleSoft and as I was very new to PeopleSoft, I had bunch of issues while installing PeopleSoft. It took me almost more than couple of weeks to finally get the PeopleSoft Application up and running.
I had bunch of questions also asked in this Oracle forum like :
Step by Step PeopleSoft HRMS Installation from scratch.
Tuxedo10gR3VS2008 patches absolutely needed for Peopetools Installation
Thanks to the replies from all you folks. That helped a lot. Anyways, so I thought of just writing a blog about the things I did while installing PeopleSoft on Windows with SQL as backend DB. There are many posts already on the web describing the steps but mostly with Oracle DB and Linux. Hence, here are the posts for PeopleSoft on Windows:
http://geekswithblogs.net/BizTalkUnleashed/archive/2012/01/24/installing-peoplesoft-hrms-9.0-on-windows-server-2008-with-sql-again.aspx
Hope it helps to newbie's in PeopleSoft Apps like me.
Regards,
Vishal Mody
Edited by: 897150 on Jan 25, 2012 10:11 AM
Edited by: 897150 on Jan 25, 2012 10:13 AM

Vijay
I hate to be rude, but I am following you for a couple of days now on this forum and even in the same tread and it looks like you do not want to helped, you just want quick answers. I do not see you putting any effort nor show any respect for the product or the people how try to help you. Keep in mind that everyone on this forum is voluntarily posting answers, nobody is getting paid, and I'm sure you do not pay to post here either, so please do not use words as asap and immediate.
You started of wrong, by following a post and not following the installation manual and even tried installing the wrong components.
The post was written by someone with experience on the subject who meets the installation requirements, with all respect to the poster of the blog.
I have to backup Nicolas in his saying.
Nicolas has asked you to use better thread title (more informative than just "installation help") and you created a new thread with this subject.
This does not say anything about the issue you are facing now.
I doubt you can successfully complete this installation, not meant personally, but you are using the wrong software, on the wrong OS, with no documentation.
My advise:
Stop with what you have done until now and start all over by following the installation manual and hardware & software requirements.
If you really want to master a PeopleSoft installation, you can follow following course at Oracle University: PeopleSoft PeopleTools Installation & Server Admin. Rel 8.50
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D61702GC10&p_org_id=1001&lang=US
Do not forget you are trying to install an ERP system, this is not done by starting an installer and clicking on the Next button three times.
Hakan

Outbound integration with peoplesoft HRMS using a soap adaptor fails

We are trying to do outbound integration with peoplesoft HRMS as a part of interface requiremnt,we are using soap adaptor for this,we are getting the following error
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message transmission failure, response code: 500 at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1731) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1473) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeInputOnlyOperation(WSIFOperation_JaxRpc.java:1156) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:865) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:781) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:801) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:208) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:127) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:118) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:95) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1444) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:112) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:305) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispatcher.java:138) at oracle.tip.esb.server.dispatch.DeferredEventDispatcher.processSubscriptions(DeferredEventDispatcher.java:153) at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(EventDispatcher
Any clues about this..
How to add HTTP header on top of the response..
Thanks,
Azeem.

We have this working at our organization and my guess is that this is related to either a missing routing or having no security set on the service operation. We are only exploring this in test but we have the ESB set up as node in Peoplesoft. There is then routing defined from that node to financials. On the service operation we have attached the role PTPT1200. I am sure this is not best practice but we are currently only testing.
If you want to attach headers for authentication/authorization I am sure it is defined in the documentation although I don't have the link in front of me.

Integration with Peoplesoft HRMS and Payroll

Hi ,
Could you please give me some steps to do a integration of Oracle Apps R12 with Peoplesoft HRMS and Payroll.
whether it is a easy work to integrate within 2months?
else it will take more time for the integration?.
Thanks,
Karthick M

hi,
Cau you please provide some document for the integration between Peoplesoft HRMS & Oracle apps HRMS.
Since i am new to this,the document will be very helpful for me to proceed further.
Thanks,
Karthick M

Peoplesoft HRMS 9.1, Peopletools 8.50 - PS PS fails when firing up app serv

Hi everyone.
I am working on setting up an environment under Oracle Enterprise Linux 5.4 (64 bit) running Oracle 11gR1 (11.0.6), Peopletools 8.50 (64 bit), Tuxedo 10gR3, Weblogic, Peoplesoft HRMS 9.1 (64 bit). Both Peopletools 8.50 and Peoplesoft HRMS 9.1 are relatively new. We are probably one of the first to set this up and we have an issue.
All of the software has been installed and configured. All database sql, datamover, and other scripts have been executed. Also, the database is fully populated.
We encounter an error when going into psadmin and trying to boot the domain HC:
CMDTUX_CAT:1685: ERROR: Application initialization failure
CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
We also receive the following errors:
Do you wish to see the error messages in the APPSRV.LOG file? (y/n) [n] :y
PSADMIN.3612 (0) [10/19/09 15:48:31](0) Begin boot attempt on domain HC
PSAPPSRV.3643 (0) [10/19/09 15:48:42](0) PeopleTools Release 8.50 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.3643 (0) [10/19/09 15:48:42](0) Cache Directory being used: /home/oracle/psft/pt/8.50/appserv/HC/CACHE/PSAPPSRV_1/
PSAPPSRV.3643 (0) [10/19/09 15:48:43](3) File: SQL Access ManagerSQL error. Stmt #: 2 Error Position: 0 Return: 404 - ORA-01017: invalid username/password; logon denied
PSAPPSRV.3643 (0) [10/19/09 15:48:43](1) GenMessageBox(200, 0, M): SQL Access Manager: File: SQL Access ManagerSQL error. Stmt #: 2 Error Position: 0 Return: 404 - ORA-01017: invalid username/password; logon denied
PSAPPSRV.3643 (0) [10/19/09 15:48:43](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HC with user PS.
PSAPPSRV.3643 (0) [10/19/09 15:48:43](0) Server failed to start
PSADMIN.3612 (0) [10/19/09 15:48:49](0) End boot attempt on domain HC
Do you wish to see the error messages in the TUXLOG.101909 file? (y/n) [n] :y
155108.sa2tech47.domain.com!PSADMIN.3722: Begin attempt on domain HC
155112.sa2tech47.domain.com!tmadmin.3743.3663685232.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
155114.sa2tech47.domain.com!tmboot.3744.925238816.-2: 10-19-2009: Tuxedo Version 10.3.0.0, 64-bit
155114.sa2tech47.domain.com!tmboot.3744.925238816.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
155114.sa2tech47.domain.com!tmboot.3744.925238816.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
155116.sa2tech47.domain.com!BBL.3745.1611062368.0: 10-19-2009: Tuxedo Version 10.3.0.0, 64-bit, Patch Level (none)
155116.sa2tech47.domain.com!BBL.3745.1611062368.0: LIBTUX_CAT:262: INFO: Standard main starting
155118.sa2tech47.domain.com!tmboot.3748.2436493632.-2: 10-19-2009: Tuxedo Version 10.3.0.0, 64-bit
155118.sa2tech47.domain.com!tmboot.3748.2436493632.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
155118.sa2tech47.domain.com!tmboot.3748.2436493632.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
155118.sa2tech47.domain.com!PSWATCHSRV.3750.3590176352.-2: 10-19-2009: Tuxedo Version 10.3.0.0, 64-bit
155118.sa2tech47.domain.com!PSWATCHSRV.3750.3590176352.-2: LIBTUX_CAT:262: INFO: Standard main starting
155118.sa2tech47.domain.com!PSAPPSRV.3751.286221264.0: 10-19-2009: Tuxedo Version 10.3.0.0, 64-bit
155118.sa2tech47.domain.com!PSAPPSRV.3751.286221264.0: LIBTUX_CAT:262: INFO: Standard main starting
155119.sa2tech47.domain.com!PSAPPSRV.3751.286221264.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
155119.sa2tech47.domain.com!tmboot.3748.2436493632.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
155123.sa2tech47.domain.com!BBL.3745.1611062368.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
155126.sa2tech47.domain.com!PSADMIN.3722: End boot attempt on domain HC
Issue is that when trying to connect and fire up the app server it fails on authentication with PS/PS. I have not changed any of the passwords. I also have searched and even run a fix located at:
http://tech.groups.yahoo.com/group/psftdba/message/577
I have also gone back and checked that:
1. The environment for weblogic is exported.
2. The weblogic daemon wlserver is running.
3. The environment for tuxedo is exported.
4. The tlisten daemon is running.
5. The tlisten listener is configured in /etc/services for port 3050.
6. Tested the sysadm, people accounts to ensure that I can log into the Oracle database. No passwords have been changed. Also checked that all of the tables exist and that they are populated with data.
7. Terminated the daemons and removed the ones that were hung using system resources using ipcrm.
8. Checked the UDDCONFIG file that was created by Peoplesoft to ensure that it was being read.
9. Went back and rechecked the installation and post-installation documentation for Tuxedo 10gR3, Weblogic, Peoplesoft PT 8.50, and Peoplesoft HRMS 9.1.
10. Went back and checked that all binaries and libraries were installed. (I did this prior to the install, but went back and checked again.)
11. Searched the error log files and looked up the codes presented. Checking on possible solutions (this is where I am now).
Anything that anyone can add would be most appreciated. I have log files from the server (of which I am still going through) that I can make available to anyone that is willing to help..
I will share any other findings as they become available and as I make progress.
Thanks in advance!
Walt
[email protected]

"PSAPPSRV.3643 (0) 10/19/09 15:48:43(3) File: SQL Access ManagerSQL error. Stmt #: 2 Error Position: 0 Return: 404 - ORA-01017: invalid username/password; logon denied
PSAPPSRV.3643 (0) 10/19/09 15:48:43(1) GenMessageBox(200, 0, M): SQL Access Manager: File: SQL Access ManagerSQL error. Stmt #: 2 Error Position: 0 Return: 404 - ORA-01017: invalid username/password; logon denied"
sounds like something to do with connect-id or access-id.
are you able to login to datamover using sysadm user ?
if yes ...can you try to login and run
set log c:\temp\test1.log;
UPDATE PSSTATUS SET OWNERID = 'SYSADM';
UPDATE PSOPRDEFN SET SYMBOLICID = 'SYSADM1', OPERPSWD = 'upg2009', ENCRYPTED = 0 WHERE OPRID = 'VP1';
UPDATE PSACCESSPRFL SET ACCESSID = 'SYSADM', SYMBOLICID = 'SYSADM1', ACCESSPSWD = 'fin23SQL', VERSION = 0, ENCRYPTED = 0;
GRANT SELECT ON PSSTATUS TO people;
GRANT SELECT ON PSOPRDEFN TO people;
GRANT SELECT ON PSACCESSPRFL TO people;
REM - ENCRYPT PASSWORD
SET LOG c:\temp\encrypt.log;
ENCRYPT_PASSWORD *;
Also check PSDBOWNER, it should contain only one row and DB Name should be in caps/lower same case as DB name ...somting it also causes issue.

PeopleSoft HRMS 9.1 Feature Pack Installation(thread 911549)

PeopleSoft HRMS 9.1 Feature Pack Installation(thread 911549)
I have successfully installed all the softwares of PeopleSoft HRMS: Upto step 7
http://geekswithblogs.net/BizTalkUnleashed/archive/2012/01/24/installing-peoplesoft-hrms-9.0-on-windows-server-2008-with-sql.aspx
Step8: Installing and configuring PeopleSoft Databases: I am facing problem at please enter the SQL Server information screen:
I am getting the error in the next step of please enter the SQL information where it asked the admin password, peoplesoft Access password, peoplesoft connect password
please find the error which I have received in the below the error:
"setup fails to connect the SQL server in the system. The error message is:noerror. Please make sure SQL server is running in the system. The minimum supported version is SQL server 2008. Please go to the previous screen to correct the problems or 'cancel' to exit."
Please advice me how to proceed this and move forward asap.
Please also let me to know where I use this password for All Products License Keys for PeopleTools Install CD : z66smq22c7mc3w444e12is23481p1f7.
I almost completed this step but found error at the last.
My OS: Windows Server 2008 R2, Database Server: MSSQLSERVER2008 with service pack2
Please help me out so that I can Install the software immedaitely. Please let me all the neccessary scenarios. Please let me if you any other clarifications.
Regards,
Vijay

Vijay
I hate to be rude, but I am following you for a couple of days now on this forum and even in the same tread and it looks like you do not want to helped, you just want quick answers. I do not see you putting any effort nor show any respect for the product or the people how try to help you. Keep in mind that everyone on this forum is voluntarily posting answers, nobody is getting paid, and I'm sure you do not pay to post here either, so please do not use words as asap and immediate.
You started of wrong, by following a post and not following the installation manual and even tried installing the wrong components.
The post was written by someone with experience on the subject who meets the installation requirements, with all respect to the poster of the blog.
I have to backup Nicolas in his saying.
Nicolas has asked you to use better thread title (more informative than just "installation help") and you created a new thread with this subject.
This does not say anything about the issue you are facing now.
I doubt you can successfully complete this installation, not meant personally, but you are using the wrong software, on the wrong OS, with no documentation.
My advise:
Stop with what you have done until now and start all over by following the installation manual and hardware & software requirements.
If you really want to master a PeopleSoft installation, you can follow following course at Oracle University: PeopleSoft PeopleTools Installation & Server Admin. Rel 8.50
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D61702GC10&p_org_id=1001&lang=US
Do not forget you are trying to install an ERP system, this is not done by starting an installer and clicking on the Next button three times.
Hakan

Peoplesoft HRMS 9.1 installation

Hi,
Any body please suggest me the best configuration for peoplesoft HRMS 9.1, list of all things need to be download for oracle linux 6.1

PSOFTHUB TECHNOLOGIES wrote:
This issue is with all the pages , i am unable to see the data from any page , when i click on links and buttons it is the case.Something was wrong during db creation, or wrong script executed. Recreate the db from scratch.
And please, do not hijack thread to ask your question, create your own thread.
Nicolas.
+-- thread locked --+

PeopleSoft HRMS

For those of you are interested in PeopleSoft HRMS Functional;
http://www.learn-peoplesoft.blogspot.com

Start here for free training and overview
Oracle By Example:
http://apex.oracle.com/pls/apex/f?p=44785:2:0:::2:P2_GROUP_ID:1022
You will find for example:
PeopleSoft Human Resources Implementation: Getting Started Complimentary Self-Study Lessons
Learn about PeopleSoft Human Resources products and business processes. Learn how to set up the PeopleSoft core human resource system foundation tables related to installation settings and companies. Oracle’s PeopleSoft Enterprise is a leader in human capital management solutions. Take initial steps to learn how to set up the PeopleSoft Human Resources Release 9.1 application with the following complimentary in-depth lessons lasting over 90 minutes: - Business Process Overview - Setting Up Installation Settings and Companies Foundation Tables
http://apex.oracle.com/pls/apex/f?p=44785:24:0::NO:24:P24_CONTENT_ID,P24_PREV_PAGE:5681,2

PeopleSoft HRMS 8.3 with Oracle 9i DBMS upgrading to Oracle 10g DBMS?

Similar Messages

Maybe you are looking for