Percentage calculation in bmmlayer

hi i'm stuck in calculating the percentage..
I have two colomuns in bmm layer one is student count and another rfstudent count.
student count gives all the students for the year 2010 whose composite score is 3 and rf student count gives count of all the students whose composite score is in 3,2,1 ,,,,ineed to calculate percentage of these two coloumns
soemthing like this student count whose CS is 3/student count whose CS is 3,2,1 and ineed to develop in bmm layer creating another logical colomun says % student count

Hi,
Move the student count and rfstudent count to Fact table and give the Aggregation as count for both columns.
Now Create a new logical column in Fact table of BMM layer - called *%Column* and then do the calculation for %Column.
Thanks,
Balaa...

Similar Messages

  • Percentage Calculation in 11g Upgrade

    upgradin to 11g issue in % cal
    The issue is as follows
    In 11g I'm calculating "ESS Rate" percenatge which is derived as below:
    ESS Rate=(ESS count/count)*100
    have casted ESS count as double and also "Count" as Int. Both the columns aggregate rule defined in the column formula is "sum"
    Edited by: 982333 on Jan 16, 2013 3:12 PM

    For more info on the columns values defined in column formula:
    ESS Rate =100*CAST(sum(CASE WHEN "Pr Audit Setup Tax Fed Fact"."Audit Oprid Nm"="- Identity".Name THEN 1 ELSE 0 END) AS double)/CAST(count(IFNULL("Pr Audit Setup Tax Fed Fact"."Audit Oprid Nm", 'NA')) AS int)
    Result obtained:
    ESS RATE| ESS Count | Count
    86.46% | 121 | 135
    while a simple calculation using calculator would clearly give you (121/135)*100= 89.63% and not 86.46%
    Can some one please help me in resolving this issue i do not see an reason for the wrong calculation of "ESS Rate" Percentage calculation.

  • Percentage calculation in reprot painter

    Friends,
    When i am doing percentage calculation in report painter ex: A/B *100, it is giving rounded value like 28% instead of 28.5 or 28.6. Any idea where i need to make changes.
    Points will be assigned
    Thanks

    Go to the Formatting-->Columns link in GRR2 screen. On the pop up screen maintain the decimal places you want.
    Regards,
    Vishal Thakur

  • Percentage calculation on query designer (7.0)

    Hi experts,
    I´m new on Query designer (7.0) and I´m trying to do a finnancial report, so for the lines I create and structure  using G/L accounts and in the columns I got the amount for each level in my structure for a month. Now I´m trying to create an Integration percentage, it specifies how high the percentage in a level is in relation to next higher level but so far I couldn't make it...
    My report must seem like this:
    Structure.............................Amount ...... Int %
    1. Assets................................1000  ....... 100%
    1.1 Current assets....................  600  .......  60%    -> (600/1000)*100
    - Cash.............................  300  ........  50%    -> (300/600)*100
    - Inventories.....................  300  ........  50%    -> (300/600)*100
    1.2 Long-term assets................ 400  .......  40%    -> (400/1000)*100
    - Property, plant and eq..... 150  .......  37.5%  -> (150/400)*100
    - Investment property......... 150  .......  37.5%  -> (150/400)*100
    - Intangible assets..............100  .......  25%    -> (100/400)*100
    I try to use each Percentage calculation options (%, %A, %CT,%GT, %RT) but it didn't work. Can anyone help me in creating a formula to get this percentage?
    Thanks

    Hi,
    check this notes and links to get an overview how to use:
    III. List Calculations (e.g.'Calculate result as..'):Interesting facts about the OLAP Processor/Analytic Engine
    SAP Note Number: [1151957|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31313531393537%7d]
    If, in a structure element (key figure ID), you use the 'Calculate Results as' and 'Calculate Single Value as' properties with their additional fields at the same time, priority problems occur and the system behavior is not immediately clear.:
    Calculate Results/Single Values as ... priority rules
    SAP Note Number: [853058 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383533303538%7d]
    Regards
    Andreas

  • Percentage Calculation for result rows

    Hi
    I have problem with percentage calculation on result rows. I have 2 KFs A and B, the result is calulated by setting 'calculate result rows as' to 'summation'.
    But in KF 'C' (which is calculated as A/B*100 ),
    Now the probles is the systen picks up original values of A and B for calculation of C in result rows.
    i.e. system picks up values of result rows for A and B for
    setting 'calculate result rows as' to 'nothing defined'.
    Any ideas on how to fix this.
    Thanks
    Karen

    Karen
    I found something in Forum for you
    Result Rows Calculation
    Pradip's Solution should work. Try and if it is don't forget to award points.
    Regs
    Gopi

  • Percentage calculation error?

    Hi guys,
    I must be missing something very basic - I can't get a simple percentage calculation to work in an applet:
    float percentage = 0;
    int amount,total;
    amount = 4;
    total = 10;
    percentage = (float)((amount / total) * 100);
    Instead of returning 40.0 in "percentage", this keeps returning 0.0...
    What am I doing wrong? How do you calculate a percentage in Java?
    Thanks!

    do the type casting of either of total or amount
    Gaurav

  • Percentage calculation according a result

    Hi,
    I have an issue with a percentage calculation in a query.
    As rows I have Product Hierarchy 1, Product Hierarchy 2 and Material. I would like to show the sales for each material as a percentage of the result by Product Hierarchy 2 and in another colunm the percentage according the result by Product Hierarchy 1. I have used the option "Normalized according to the next level.." and it works to calculate the percentage according Product Hierarchy 2, but how can i manage to calculate the percentage according to Product Hierarchy 1( it is not the next level of the hierarchy, it would be the second next level)?
    Thanks in advance.

    Hi ,
    check this link ..
    http://help.sap.com/saphelp_nw70/helpdata/EN/ee/37e80557494542806a38498d99a463/content.htm
    Hope this helps ...
    Regards,
    Shikha

  • Percentage calculation based on subtotal in webi 4.0

    Hi Experts ,
    How do i calculate the % column in webi 4.0  so that % would be calculated by the amount of Primary channel / Subtotal ) in one block.
    =[Amount Of promary Channel]/Sum([Amount Of promary Channel]) In Block  - not giving correct output.
    Thanks,
    Rajib

    Hi Rajib, As per my understanding, you want to show percentage on the base of subtotal.
    that means if you set break on the Compony then percentage column should contain the percentage calculated on the basis of compony subtotal.
    like this...(just one block of break)
    then just use the simple percentage function ( =percentage(amount) ), this will automatically calculate the percentage based on subtotal.
    and if you want to show 100% in subtotal row also then you can use formula= (amount/sum(amount)),
    i think we dont need to use contex operator here.
    formula for AHW total row = amount/sum(amount)
    Let me know if this will help you,
    Thanks,
    Nitin

  • Crystal report 2011 percentage calculation(Urgent)

    All,
    I am working on a report which looks like the below.
    product>>>>>>> revenue>>>>>>>>> growth percentage
    a  >>>>>>>>>>>     12 >>>>>> >>>>               48%
    b >>>>>>> >>>>>>>13 >>>>>>>>                  52%
    c  >>>>>>>>>>>>>   14 >>>>>>>>>                       
    d>>>>>>>>>>>>>>  16>>>>>>>>>>>>                                     
    total         >>>>>>>   25  >>>>>                          100%
    my requirement is to calculate the individual growth percentage of a and b with the total revenue of a and b only.
    to be more specific 12 divided by 25  and then 13 divided by 25.
    i want these growth percentages in growth percentage column in my report.
    I achieved the selective summation of revenue for a and b in the report footer but i am not able to use the total revenue 25 (that i get in the report footer)  in the body of the report(detail section) for growth percentage calculation.
    I tried using shared variables and global variables but of no use.i am not able to assign the grand total in the footer to a variable in the detail section in order to calculate the growth percentage.
    Is there any easy work around to achieve this? need urgent help.
    I also tried running totals and stuff but of no use.
    Any help would be appreciated.
    Reji.
    Edited by: reji2011 on Jan 22, 2012 7:32 PM

    Hi Reji,
    I'm not sure how you've added 'a' and 'b', however, whatever way it would be, I'm sure it would be a print time formula.
    Meaning it is calculated a later stage after all the records are printed. So, you would never be able to use a value in the Report Footer or any Footer to calculate against a detail section value and show the calculation on the detail section itself.
    The way I see it, you would need to insert this report as a sub-report, just to calculate a + b, store this value in 'shared variable' and use it for calculations in the Main Report.
    So, in the sub-report, where you have your formula that calculates the addition of a and b, just create a shared variable and assign this value to it.
    Place the sub-report on the Report Header and in the Main report create a formula that calls the shared variable. You can then use this formula/variable in Main-report's calculations.
    Hope this helps!
    -Abhilash

  • Why I can not find the percentage calculation %ct

    Hi,
    I m trying to use the Percentage Calculation %ct for a calculated KeyFigure. There are only two Functions: %  and  %A
    Can anyone explain why it is so?
    thanks and regards

    Hi,
    Percentage Variance (%)
    <Operand1> % <Operand2>
    This gives the percentage variance between operand 1 and operand 2. 
    Percentage Share (%A)
    <Operand1> %A <Operand2>
    This gives the percentage share of operand 1 and operand 2. It is identical to formula 100 * <Operand1> / abs(<Operand2>) , if <Operand2> is not equal to 0 and the character for u201CDivision by 0u201D if <Operand2> is equal to 0.
    Use
    You use the following percentage functions as operators when you define a formula or a calculated key figure.
    Features
    NULL values are displayed as empty cells, not as 0. For more information about when NULL values occur and how they are displayed, see Technical Notes About the Formula Operators.
    Percentage Variance (%)
    <Operand1> % <Operand2>
    This gives the percentage variance between operand 1 and operand 2. It is identical to:
    Formula 100 * (<Operand1> - <Operand2>) / abs(<Operand2>) , if <Operand2> is not equal to 0 and the character for u201CDivision by 0u201D if <Operand2> is equal to 0.
    Plan Sales % Actual Sales specifies the percentage difference between the plan sales and the actual sales.
    Percentage Share (%A)
    <Operand1> %A <Operand2>
    This gives the percentage share of operand 1 and operand 2. It is identical to formula 100 * <Operand1> / abs(<Operand2>) , if <Operand2> is not equal to 0 and the character for u201CDivision by 0u201D if <Operand2> is equal to 0.
    Character for "Division by 0" :See SAP Reference IMG  u2192 SAP Customizing Implementation Guide  u2192 SAP NetWeaver  u2192 Business Intelligence  u2192 Settings for Reporting and Analysis  u2192 General Settings for Reporting and Analysis  u2192 Display of Numeric Values in the Business Explorer.
    "Fixed costs" %A "costs" expresses the proportion of the total cost of a product that is the fixed cost.
    Percentage Share of Result (%CT)
    %CT <Operand>
    This shows how high the percentage share is, with regard to the result. The result is the outcome of aggregating the second highest results level (interim result).
    Use
    You use the following percentage functions as operators when you define a formula or a calculated key figure.
    Features
    NULL values are displayed as empty cells, not as 0. For more information about when NULL values occur and how they are displayed, see Technical Notes About the Formula Operators.
    Percentage Variance (%)
    <Operand1> % <Operand2>
    This gives the percentage variance between operand 1 and operand 2. It is identical to:
    Formula 100 * (<Operand1> - <Operand2>) / abs(<Operand2>) , if <Operand2> is not equal to 0 and the character for u201CDivision by 0u201D if <Operand2> is equal to 0.
    Plan Sales % Actual Sales specifies the percentage difference between the plan sales and the actual sales.
    Percentage Share (%A)
    <Operand1> %A <Operand2>
    This gives the percentage share of operand 1 and operand 2. It is identical to formula 100 * <Operand1> / abs(<Operand2>) , if <Operand2> is not equal to 0 and the character for u201CDivision by 0u201D if <Operand2> is equal to 0.
    Character for "Division by 0" :See SAP Reference IMG  u2192 SAP Customizing Implementation Guide  u2192 SAP NetWeaver  u2192 Business Intelligence  u2192 Settings for Reporting and Analysis  u2192 General Settings for Reporting and Analysis  u2192 Display of Numeric Values in the Business Explorer.
    "Fixed costs" %A "costs" expresses the proportion of the total cost of a product that is the fixed cost.
    Percentage Share of Result (%CT)
    %CT <Operand>
    This shows how high the percentage share is, with regard to the result. The result is the outcome of aggregating the second highest results level (interim result).
    If a characteristic has been drilled down in both the rows and the columns, this reference is not unique. The system displays a warning and the relevant symbol for Data Does Not Exist. For more information, see SAP Reference IMG  u2192 SAP Customizing Implementation Guide  u2192 SAP NetWeaver  u2192 Business Intelligence  u2192 Settings for Reporting and Analysis  u2192 General Settings for Reporting and Analysis  u2192 Display of Numeric Values in the Business Explorer.
    Percentage Share of Overall Result (%GT)
    %GT <Operand>
    This shows how high the percentage share is with regard to the overall result. The overall result is the outcome of aggregating the highest results level. Dynamic filters (filters that were not specified in the Query Designer) also play a role in calculating the overall result.
    Percentage Share of Query Result (%RT)
    %RT <Operand>
    This is the same as %GT.
    Unlike the process for calculating the overall result, dynamic filters are not used in the calculation of the query result. This means that the calculation always normalizes to the same value, irrespective of the filter status and the navigational state.
    Reg
    Pra

  • Production system editing of overhead percentage calculation

    Hi,
    We want to maintain the overhead percentage calculation in the live
    production system through the T.code S_ALR_87008275.when we want to
    change the percentage the following message appers "Client has status
    not modifiable". Without changing the client status we want to change
    the percentage in the live production server. Kindly guide us in this
    regards....
    Regards
    Syamkrishnan

    Hi
    Refer to SAP notes 372620,374609,356483, 135028 and 77430
    This will help you in achieving the same.
    Good Luck
    Hari

  • Percentage Calculation in Query

    Hi Gurus,
      Hope you are all doing good! I have an issue in my query. I have calculated the summation of Profit for 05 and 06 . In the properties these are the specification i have given :
    1.Scaling Factor : 1,000,000
    2.Number of Decimal Place : 0.0
    3.Calculate Result As : Summation
        I get the summation for both 05 and 06 correctly. I computed the percentage for
    both and seems to be fine.
    Formula used for computing percentage : ' / Profit 06' / ' / Profit 05' * 100
    My issue being the Over all percentage seems to be high.
    Any idea Gurus?
    Points would be surely assigned.
    Regards,
    Sunitha.R

    Hi Norris Silva,
    As per your scenario total questions = 11
    persons (c1, c2, c3, c4, c5) = 5
    c1 answered questions = 5
    c2  "          "      = 5
    c3  "          "      = 1
    here to calculate the percentage of answered questions
    for each person. This can be calculated as below with use of
    calculated key figure
    c1's % ---> ci1 answered questions/total questions * 100
             5/(551)*100= 45.45%
    like write formula in calculated key figure for each person.
    Hope it helps you...
    Regards,
    Ramki.

  • Percentage calculation in pivot table per row

    Hello all,
    I do calculate two fields in a pivot table. First calculated field is the # of activities per user (standard SoD reporting field). Second calculated field is the # of activities per user with a certain classification (customized pick list field that is converted in a from a text value to a integer value ==> CASE WHEN Activity.Type = 'Call' THEN 1 ELSE 0 END).
    In the pivot table I do show both vlaues as a sum. I would like to calculate the percentage per row per user.
    Example:
    User - # activities - # calls - percentage
    User XY - 80 - 40 - 50%
    Thanxs for your help
    Elmar

    have you # Call column look like
    sum(CASE WHEN Activity.Type = 'Call' THEN 1 ELSE 0 END) -- column2
    create the percentage column with # activities / column2
    under the column property of the percentage column --> Data Format -->Treat Numbers As --> percentage.
    leave the Aggregation Role as default on all columns.
    Hopefully, I didn't miss anything.
    Shilei

  • Percentage calculation in the report

    Gurus,
              I have a report which has a characteristic called Rate Category which has Commercial and Residential customers. I want to find out the percentage what is the percentage of each category in a paricular business area. But I dont have any charaterictics/KF to keep a running total. Please help. Thanks
    -A

    Hi
    You need to create a counter in the calculated KF which counts the customers (characteristic for exception of aggregation)
    Then you need to use this KF in the report and play with the result options to calculate the percentage
    Try to look in the how to documents for How to count....
    Hope it helps
    PY

  • Percentage Calculation using RKF and CKF

    Hi,
    I am unable to create a CKF which calculates % of a key figure (Net PO value). The % has to be calculated on the overall total of the column.
    My scenario does not allow me to use formulas to do so. So I had to create a RKF which uses my key figure and I restricted it with Vendor (Constant Selection) which was in my rows. Then I created a CKF which calculates the percentage using this restricted key figure. But when I go into my query analyser and open this query and try to restrict the vendors to only a few, the percentage is still calculated to the entire vendors for that particular company code.
    Is there another way to solve this problem where I could get the percentage values according to as many vendors I filter the report on?
    Many thanks
    IA
    Edited by: I A on Jan 13, 2010 1:39 PM

    Hello I A,
    Go to Query Designer, select you key figure and in "calculations tab" select: Calculate individual values as--> Normalize after overall result (8th option).
    I hope this helps! (in that case rewrd pts please )
    Regards,
    Jordi

Maybe you are looking for