Percentage Overhead Rates are not capture with Transport request

Hi,
I have defined Percentage Overheads rate in KZZ2 and assigned the same into Costing Sheet.But while saving the transport reqest in to QAS client,It is throwing the below error.Kindly help me in solving this issue.
Individual entries cannot be put into the change request
Individual entries cannot be put into the change request
Message no. SV141
Diagnosis
For technical reasons, the entries cannot be fully specified in the change request. There are two possible reasons for this:
1. The key of an entry is longer than 120 characters. All entries whose keys match up to character 119, are then copied into the change request, rather than an individual entry.
2. The key of an entry contains fields of special data types, for example, packed numbers. The key can only be specified in the change request up to the first such field from the left.
all entries whose keys match up to character 238 are copied into the change request, rather than a single entry.
System response
The selected entry is copied into the change request correctly, but other entries may be copied as well.
Please advice me.
Thanks
Sunitha

Hi Sunita,
I am also facing the same problem while transporting the overhead rates in quality and production.
Can you give the elaborative steps of how you resolved your issue.
The steps mention as under i tried but it is not working
1) Go to SA38 or SE38
2) Run the program RKAZUTR1
3) You need to specify the number of your request with the costing sheet changes
Thanks in advance
Sayed

Similar Messages

Most of my my target audience are not familiar with iTunes, so I am trying to figure out how to explain how to rate it. What's the fastest way to say it to the iTunes-newbie?

Most of my my target audience are not familiar with iTunes, so I am trying to figure out how to explain how to rate it. Is this the shortest way? “Open iTunes on your computer, click on iTunes Store and search for my podcast. You’ll see it at the top of the results. When you click on it, you’ll see “Write a Review” and will be able to submit your comments and ratings.” Right now they find my podcast because they are on my mailing list, not through iTunes. It would be easy if I could just say, "Go to iTunes.com" or "Go to my web site" - but there are sooooo many steps! Help! Thank you,
Milana

There is another trick - if you give them this URL:
itpc://feeds.feedburner.com/RecurringRevenueRevolutionPodcast
(note itpc not http)
it will subscribe them directly to your feed in iTunes, but it does depend on their having iTunes installed (and in Windows set as the application to use with 'itpc'), otherwise they will get an error message, so it's a slightly double-edged weapon. You could them the link and say 'subscribe in iTunes' as an alternative to the iTunes Store page.

Excise rates are not updated

Hi friends
When i am creating ARE3 document, in item details Duty rates tabe- excise rates are showing 0, whereas Duty values are coming,
I have checked in table j_1iexcdtl - duty rates are not updated and duty values are updated
How to update the table j_1iexcdtl
Thanx and Regards
srini

Dear MBS
Thanks for reply
I am doing deemed export process
I am using TAXINN calculation procedure and pricing procedure was ZDEEM.
as you said i have already done the classify condition types as below
ZDEEM - JEXP - BED percentage
ZDEEM - JECS - ECS percentage
ZDEEM - JA1X - AT1 percentatge
I have checked the table and it was updated,
now i am trying to create ARE3 document but the values are not coming into ARE3 document, only ECS percentage is coming and all the values are showing 0
and how to resolve the issue
Regard
srini

IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

Special cursor are not captured in Captivate 6

We try to create software simulation of Russian analog of AutoCAD, named KOMPAS-3D.
In this program we are working with CAD drawings. And then in this software we are moving mouse over some objects of drawing like line or circle (or section in 3d drawing) - cursor are changing to special cursor symbol.
Important –> in this case cursor are changing not after mouse click. He changing with event mouseover.
But then we try to capture work with drawing in KOMPAS-3D – this special cursor symbols are not captured.
We try to use AC 6 for this screen capturing and can’t capture our special cursor symbols.
But in AC 5.5 – its work fine!
Help us please!

Hi
You might already know this, but stating it here to rule out the simple failure cases.
I have had a similar problem in the past using VTML tags inside Captivate. I used to type the slidenotes in my favorite editor and then copy paste the text from there to the slidenotes panel of Captivate. Turns out that my editor was using Unicode and hence the entire text pasted into Captivate slidenotes became unicode text, including the VTML markers. Though the pasted text "looked" fine the markers were messed up (for example, the double quotes around the value attributes looked like double quotes but they were actually multibyte unicode sequences) and this confused Neospeech. The output audio would be funny (for example it would read "Less Than...V...T...M...L...") or NeoSpeech will crash taking down Captivate along with it.
The fix was quite simple. I started typing the slide notes from within Captivate slide notes panel and everything worked fine after that. Alternately I could type in my favorite editor (after making sure that it is operating in Plain text mode) and then copy paste work flow also worked fine.
Another common mistake (at least, I do that often) is to select the speech agent from the drop down at the top of the dialog and forgetting to choose the speech agents for individual slide notes, which may still be referring to a non-neo-speech agent which does not understand the VTML tags.
No other software tool was required like the German Adobe Support team may have mentioned. I am using Captivate 7.
Cheers
Siva

Which of these statements about overhead rates are true?...

Hello SAP-team!
Which of these statements about overhead rates are true and which are false?
- The costing sheet is entered in the master record of the order
- Costing sheets consists of base, overhead rate, and credit
- Overhead cost elements of type 41 are entered in the rate
- The costing sheet is assigned at controlling area level and is determined automatically by the system
- Only percentage rates are possible for overhead rates
ps: thanks to SAP-community!
Eugene

Hi,
Which of these statements about overhead rates are true and which are false?
- The costing sheet is entered in the master record of the order- True
- Costing sheets consists of base, overhead rate, and credit-True
- Overhead cost elements of type 41 are entered in the rate-True
- The costing sheet is assigned at controlling area level and is determined automatically by the system- I think false. Generally cost sheet is defined independently and assigned either thru costing variant or thru orders.
- Only percentage rates are possible for overhead rates- False. Qty based is also possible
Regards
Sudhakar Reddy
Edited by: Sudhakar Reddy K.V. on Sep 15, 2009 11:27 AM

Old Bookmarks are not compatible with Firefox version 20+

Background Information:
I use the old client version 3.6 as there's an old utility addon that the author stopped updating and will not work with the newer revisions. Despite disabling the update feature both in about:config and in preferences, the browser still eventually updates (Originally I was using 3.4, and would prefer to use that, but no matter how much I try I can no longer roll it back from 3.6 to 3.4 even if I reinstall using a 3.4 installer). As a result I've had a habit of keeping a copy of my firefox directory in case it updates itself again without asking, which it has. This might help you guys out in answering the countless people who have lost their bookmarks due to the upgrades released this year, and will hopefully someone to investigate and release a patch/utility to fix the issue.
Issue:
I have verified that the newest clients from at least version 20 and onwards, are not compatible with the older bookmark JSON files. People who have been upgraded to the latest revision not only lose their bookmarks, but CANNOT restore them either, as Firefox will only return the error message: "Unable to Process the Backup File".
I have confirmed that the files themselves are perfectly intact with no sign of corruption, and are as intended. They restore ok to older browser revisions (In my case specifically 3.6), but will not restore to the newer client revisions. This is not a fault with the bookmark backups, but with the newer clients (I'm guessing they changed the way they store the information in the JSONs at some point. I note in the code for the JSONs that GUID was never used in the older revisions, but it is in the newer revisions. Perhaps this is causing an incompatibility issue? You just need to adjust the client so that it looks for the GUID and if none can be found to ignore it rather than decide the file is corrupt.
Old JSON Code snippet: {"title":"","id":1,"dateAdded":1306666129870000,"lastModified":1306670152435000,"type":"text/x-moz-place-container","root":"placesRoot","children":[{"title":"Bookmarks Menu","id":2,"parent":1,"dateAdded":1306666129870000,"lastModified":1381254048121000,"type":"text/x-moz-place-container","root":"bookmarksMenuFolder","children":[{"title":"Recently Bookmarked","id":6,"parent":2,"annos":[{"name":"Places/SmartBookmark","flags":0,"expires":4,"mimeType":null,"type":3,"value":"RecentlyBookmarked"}],"type":"text/x-moz-place","uri":"place:folder=BOOKMARKS_MENU&folder=UNFILED_BOOKMARKS&folder=TOOLBAR&sort=12&excludeQueries=1&excludeItemIfParentHasAnnotation=livemark%2FfeedURI&maxResults=10&queryType=1"},{"index":1,"title":"Recent Tags","id":7,"parent":2,"annos":[{"name":"Places/SmartBookmark","flags":0,"expires":4,"mimeType":null,"type":3,"value":"RecentTags"}],"type":"text/x-moz-place","uri":"place:sort=14&type=6&maxResults=10&queryType=1"},{"index":2,"title":"","id":8,"parent":2,"dateAdded":1294868015246000,"lastModified":1294868015246000,"type":"text/x-moz-place-separator"}
New JSON Code Snippet: {"title":"","guid":"5rkFafJ6AnRZ","id":1,"index":0,"dateAdded":1396387525168000,"lastModified":1396387525168000,"type":"text/x-moz-place-container","root":"placesRoot","children":[{"title":"Bookmarks Menu","guid":"m7vLM41-lzQi","id":2,"index":0,"parent":1,"dateAdded":1396387525168000,"lastModified":1396387526173000,"type":"text/x-moz-place-container","root":"bookmarksMenuFolder","children":[{"title":"Recently Bookmarked","guid":"BEffyw6xva93","id":13,"index":0,"parent":2,"dateAdded":1396387526172000,"lastModified":1396387526172000,"annos":[{"name":"Places/SmartBookmark","flags":0,"expires":4,"value":"RecentlyBookmarked"}],"type":"text/x-moz-place","uri":"place:folder=BOOKMARKS_MENU&folder=UNFILED_BOOKMARKS&folder=TOOLBAR&queryType=1&sort=12&maxResults=10&excludeQueries=1"},{"title":"Recent Tags","guid":"WmnlbVv38Bjv","id":14,"index":1,"parent":2,"dateAdded":1396387526172000,"lastModified":1396387526172000,"annos":[{"name":"Places/SmartBookmark","flags":0,"expires":4,"value":"RecentTags"}],"type":"text/x-moz-place","uri":"place:type=6&sort=14&maxResults=10"}
Solution?
Well in my case I had a backup copy of the old revision directory. To restore I opened the copy, and exported the bookmarks as an HTML, which I restored in the newer client. If you do not have a copy of the old client, the best thing would be to try and reinstall an older revision of the client and either make a copy of the program folder and use another copy of that so you can use both the new and old clients and not worry about the loss of an older revision since you'll always have 2 copies of the old client (One you're using, one you use to restore if it upgrades). Or you export the bookmarks as an HTML, then upgrade the client to the newest and import the HTML instead of the JSON files.
Please investigate and create an easier solution to a silly incompatibility issue. ^_^

This happens if you create a backup and forget to add the file extension manually when Firefox didn't add it automatically or you may have removed it when modifying the suggested name.

Since changing our computer I have been unable to download ebooks to my Reader Library I get a message Some file types associated with EPUB files are not associated with Reader Library; Waterstones suggest that I may have accidentally created a new Adobe

When I try to download them from the Waterstones website I get a message saying:
‘Some file types associated with EPUB files are not associated with Reader Library. Do you want to associate them now? When I reply yes I get another message; ‘Configuration error unable to update EPUB files check network firewall and try again’.
The ‘books’ are saved in the Download directory and I can’t transfer them from there to my E-Reader. I have not had any problems before, it was very simple; I saved the download and it automatically went into the Reader Library.
I contacted HP and they said it is a software error and suggested I contact Waterstones. I contacted Waterstones Customer Support and got the following response:
As the error message is specifically mentioning the firewall it does sound like something in the firewall settings is stopping the download from taking place correctly. However, the files should not be being saved to the Download folder. It would be worth trying again by going to your Digital Order History on your Waterstones.com account and pressing the download button, and then making sure to press "Open" not "Save". When you press Open rather than Save it should give the option to open the file with Adobe Digital Editions. If the firewall message still comes up then I'm afraid something is blocking it on your end.
If the above "Open" download method works but you then still get an error message it could possibly be that you have accidentally created a new Adobe ID when setting up on the new computer, rather than signing in with your old Adobe ID. It would be worth trying the aforementioned download technique again first, but if problems did still persist it would be worth calling Adobe themselves on 0207 365 0735, as they should be able to sort out any account issue.
In response to the first para of Waterstones email I already do what they suggest I do press ‘Open’ not ‘Save’ but I don’t get the open with Adobe Digital Editions (we have installed Adobe Digital Editions on the new computer. Waterstones say we may have ‘accidentally created a new Adobe ID when setting up the new computer’ does that mean that we shouldn’t have installed Adobe Digital Editions on the new computer as it would have already been there? How do I sign in with my old Adobe ID?

Hi all after attampting to get some supoport from adobe by phone.... nice people infurating policys as far as support for digital editions or DRM is conserned... However I got no where with support.
I ended up instaling Digital editions on my desktop PC and going through the motions of registering and borrowing a book then returning it. Then I trying on my iPad, Bluefire worked, Over drive did not so I completely removed Overdrive and reinstalled and re registered. all working now.
Maybe some one at adobe did something. Maybe the install of the adobe DE client on a PC corrected what ever was out of wack with my account. Mayby the server that my account lives on did a scan disk and corrected a bad clustrer.
What ever happend My account is actiove and working again. hope this helps others.

Since Mavericks update my iPhone and iPad calendars are NOT syncing with the calendar on my MacBook Pro

Since Mavericks update my iPhone and iPad calendars
are NOT syncing with the calendar on my MacBook Pro.
I used to use iTunes but don't see the options now.
Does anyone know how to set up a sync.?

I have temporarily solved the sync problem by using an older MBAir running snow leopard, I exported
both calendar and contacts and imported them in the MBA and synced normally.
Since I'm not about to send my data on the cloud, or setup a server to just sync my iphone,
I think this is a good workaround ! BTW I stopped updating my contacts and calendar on the MB, I only
update the iphone until a permanent solution is found !
And they better come up with one soon, because I'll just switch to an Android phone and Ubuntu linux for my MBP, Apple should make our lives easier, not harder !
I'm sure Samsung is having a ball ever since the sync issue was made public !
Hopefully Apple is listening and will make things right again !

I recently updated my MacBook Pro to the new software, and now my iMessage and my FaceTime are not connected with my computer. How do I get them to match so that I would be able to use my cellphone number?

I recently updated my MacBook Pro to the new software, and now my iMessage and my FaceTime are not connected with my phone number like it is supposed to be. How do I get them to match so that I would be able to use my cellphone number on my notebook?

To reset any OS X program just go to the folder and trash the affected files.
Open a new Finder Window
Click "Go" in the above status bar
Click and HOLD the "option/alt" key and you will see "Library" now show in the above list
Click Library while still holding the option/alt key and a new window will open with all of your system files
Go to the preference file (NOT Preference Panes)
Locate a file named <com.apple.FaceTime.bag.plist>
Locate another file named <com.apple.FaceTime.plist>
Locate the file <com.apple.iMessage.bag.plist>
Drag the files to the trash
Delete the trash
Close FaceTime and iMessage if not already closed
Relaunch FaceTime and iMessage from Applications folder
This should reset the program back to default. You will have to put your information back into the program but it should work.
Good Luck.

Table are not prefixed with Schema in SQL request - Unable to get Data

I began this new thread because I closed the [previous one|Unable to get data (DSN connection); a little bit early, I believed it was OK but no the problem still here.
First my architecture :
Oracle 9g
+500 Reports made under CR developper 8.5 or 9.0
Report opened in VB .net application, framework 2.0 using CR runtime 8.5 and 9.0
We want to upgrade CR version to 2008, so modification of reports will be done with CR 2008 Developper, and we want to
use only CR 2008 runtime.
The problem :
Everything works fine in CR Developer, but the same report with the same parameters failed when called inside .net.
The error is "Unable to get data", the database connection is OK but the queries mades from inside the report are wrong :
The tables/views in the from statement are not prefixed with the Schema, so Oracle don't find them.
Example (SQL monitoring done with TOAD)
Execution of postes.rpt report directly in CR :
Timestamp: 10:30:03.881
Successful logon attempt (session tag: 0x6464CB8)
username: 'APPLI_HUET'; database: 'DEV'
SELECT ...
FROM "COMMUN"."ETAB" "ETAB" INNER JOIN "GESTION_DES_TEMPS"."POSTES" "POSTES"
ON "ETAB"."N_ETAB"="POSTES"."N_ETAB"
WHERE "POSTES"."N_ETAB"=2 ORDER BY "POSTES"."N_POSTE"
Timestamp: 10:50:29.178
Logoff (session tag: 0x6464CB8).
Same report, same authentication but throught .net program :
Timestamp: 11:01:24.569
Successful logon attempt (session tag: 0xA93FC38)
username: 'APPLI_HUET'; database: 'DEV'
SELECT ...
FROM "ETAB" "ETAB" INNER JOIN "POSTES" "POSTES"
ON "ETAB"."N_ETAB"="POSTES"."N_ETAB" WHERE "POSTES"."N_ETAB"=2 ORDER
BY "POSTES"."N_POSTE"
Runtime error occurred: 942 (ORA-00942: Table ou vue inexistante)
The .net code :
Dim _report As New ReportDocument()
_report.Load("report.rpt", OpenReportMethod.OpenReportByDefault)
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
myConnectionInfo.ServerName = "DSN_file"
myConnectionInfo.UserID = p_Userid
myConnectionInfo.Password = p_Password
' to see code in this method se my original post
SetDBLogonForReport(myConnectionInfo, _report)
SetDBLogonForSubreports(myConnectionInfo, _report)
Dim frmViewer As New CrystalReportViewer
frmViewer.CrystalReportViewer1.ReportSource = _report
frmViewer.Show()
Any ideas ?

Thanks for the and sorry but I don't understand.
I've made a research of Location on this forum the more intersting thread I've found is rpt-files do not function anymore after deploying to a different database, but I still don't understand.
I take a look at all code sample and I can't found anything.
You say that .Location need to be set, indeed Location property of CrystalDecisions.CrystalReports.Engine.Table object only contains table name.
I tried to overrides this value by the fully qualified table name (ie Schema.Table, for example GESTION_DES_TEMPS.POSTES), and it work BUT it wouldn't be the solution, my code is designed to be generic, I can't have a database to know wich schema add before differents table name.
Why when we execute the report directly in CR 2008 developper we don't have to redefine the table location ?
Another test :
I've made a new report directly in CR 2008 with a DSN, launch it in .net with the same DSN (server) : OK
Then I launch it in .net with another DSN, it work also.
Why report done with Crystal 8.5 or 9.0 have this problem ?
I'me gonna be mad....
Edited by: Yoann DAVID on Jan 8, 2010 3:32 PM

My iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening. My iCloud account is fine as i can create documents on my iPad and they appear on iCloud.

my iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening. My iCloud account is fine as i can create documents on my iPad and they appear on iCloud. However, when i change documents on my mac (documents that are supposed to be in the iCloud), the changes do not sync with my other devices nor with iCloud. Even when i create new documents on my mac and save them to iCloud, all seems okay and i can access them from my mac, however they do not show up in the iCloud and i can't access them with my other devices.
Most recent version of mountain lion updated over a month ago. New iPad in use for over a month.
thanks

The same thing is happening to me, Mail was fine about an hour ago and now is rejecting correct password. Typical when today I'm waiting some important emails!

Adobe 7 is not compatible with Vista, If you are not satisfied with that answer...

Unfortunately for what I do for a living I can't use a mac, cannot WAIT till they do become compatible or I just switch professions!
I have adobe 7Pro because I MUST create PDF documents for my business, however when my laptop crashed for the 3rd time in less than a year and I was NOT about to pay HP $400 to reboot it, instead I had fun and smashed it (like in Office Space) and went out and bought a new Sony Vaio. This laptop is nice and all however now ALL new computers come with Gates newest form of a rip off, VISTA, which had so many issues they release a new update for it every day and professional companies wouldn't touch it, so they FORCED it on us small business owners and personal computer users, such CRAP! (If you notice all large corporations use XP, there is no Vista for large corps, there's a reason for that...
The people that do NOT have the $ to keep upgrading and paying for FIX ITS online from some unknown who has figured a work around are forced to use this crap!!! I'm BEYOND anoyed... ANYWHO I am installing my adobe 7pro and every time I open it I get asked to "ACTIVATE AGAIN" so I call in to get a NEW Activation code and a minute later it does it AGAIN... SOOO, I get Tech support and the IDIOT in India literally READS to me the following statements:
"Adobe 7 is not compatible with Vista"
I tell him, that's a lie because my friend uses it on vista.
He proceeds to READ to me "If you are not satisfied with that answer, then acrobat no longer supports Adobe 7". WTF?!?!? If I am not SATISFIED with that answer!??! aparantly he was NOT supposed to read THAT part!!! Laughing I proceed to tell him to piss off and hang up on him because I am SOOO tired of all these damn AMERICAN companies outsourcing their customer service to some 3rd world country where they pay these people $5 a week and have them just read from a ******* script for your problems, that is NOT technical support, that's BULL CRAP! I know 4 yr olds that read english better!!!
I am sick and tired of it... I might just take advantage of the 14 day return policy and go to Apple and buy a mac next week and change my profession sooner than I had planned JUST TO AVOID USING THIS CRAP!!! ADOBE YOU SUCK!!! Microsoft SUCKS!!!
If you run into this problem do what I am doing, go to Apple and buy a mac, we need to stand up against all this and pay attention to the COMMERCIALS that are VERY TRUE and drop Microsoft, IBM, anything Gates related and stop using their products!!!

Thanks Mike!
I'm just so frustrated, its bad enough my other laptop wasn't even 2 yrs old
yet and I've spent $800 to have it fixed twice already, this 3rd time I was
DONE... so I moved onto Sony, but this Vista just is making my life a living
hell, I just spent a fortune on the laptop, and now I have to buy Adobe 9
when my adobe 7 isn't even 2 yrs old... ugh... its just very frustrating and
nerve racking and is costing more than I make in a week in this business
(real estate processing)... I should sell Microsoft for a living, I'd be a
millionaire!
My husband's Mac has been through hell and back physically, is 5 yrs old and
we've never had to take it in for any upgrades or issues, its SO easy to
use... why can't Microsoft be the same?!?!
Thanks for your input and for being understanding of my frustration, I bet
you see those often! LOL

ADF bindings are not working with inheritance heirarchy.

ADF bindings are not working with inheritance heirarchy. I am using embedded OC4J in JDeveloper 10.1.3.2.
For the data model I have the following objects\attributes.
1) User (abstract EJB 3.0 POJO)
- Id
- userId
- userName
2) Employee -> extends User (EJB 3.0 POJO)
- enabled
- password
3) Manager -> extends Employee (EJB 3.0 POJO)
- numOfEmployees
4) UserSessionBean (Stateless Session Bean)
- public User findUserByUserId(String userId)
- public List<User> queryUserFindAll()
- Object mergeEntity(Object entity)
I created 2 JSF pages using ADF.
1) ListUsers.jspx - Lists all the users of type Employee and Manager in a table. You can select an user and chose to modify the user details using a modify button.
2) ModifyUser.jspx - Modify the selected user and persist the modified user details.
I implemented ListUsers.jspx by dragging and dropping queryUserFindAll() method from the ADF datacontrol on to the JSF page and selected ADF Table format with selection enabled.
Similarly for the ModifyUser.jspx page I dragged and dropped the User object returned by findUserByUserId(String userId) and selected ADF Form format. I selected OutputText field types for userId and userName.
I then created a navigation case from ListUsers.jspx to ModifyUser.jspx and pass the selected user.
Now when I try to run the web application, ListUsers.jspx correctly displays all the users. Then I select a user of type Employee and click on the modify button. This brings up the ModifyUser.jspx page. However, the UserId text field displays the value for "Id" field rather than "userId".
Question that I have is:
- Why is ADF framework not able to retrieve the appropriate user attribute value for a Employee based on the binding information in case of inheritance ?
Thanks,
Piyush

Hi,
tried with JDeveloper 10.1.3.3 and this works for me. Try JDeveloper 10.1.3.3 - if it doesn't work, have a closer look at your sessionFacade
Frank

Any forms are not opening with error ORA-01403: no data found in R12

HI ,
Suddenly any of the form are not opening with following error.
FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-04063.
Can any one help ?

I bounced the database and listner. Have application down.
After
Compile/Reload Applications Database Entities
1. Compile APPS schema
Still I see 5012 apps object invalid.
select
count(*) from dba_objects where status !='VALID' and owner=
'APPS'
COUNT(*)
5012
1 row selected.
is that a normal count I do not have previous baseline to compare with.

Percentage Overhead Rates are not capture with Transport request

Similar Messages

Maybe you are looking for