Performance Black by C.333

Performance Black by C.333
Hello everyone, today I'm happy to show you one other mod
The first thanks go to MSI Taiwan for the wonderful support they gave me for this mod
The second to Seasonic world leader in power supplies
Thanks also for the G.Skill Ram

Similar Messages

  • Making black and white copies with the tri- color ink

    I would like to know if using tri-color ink to print blank and white copies, drain the color ink too much when compared to using a black ink? 

    Hello @Rajeeeram,
    Welcome to the HP Support Forums!
    I understand that you would like information regarding ink usage when copying and printing to your HP ENVY 5643 e-All-in-One Printer. I would like to offer my assistance with this today.
    When you copy from your printer, the unit will only use the cartridge that matches the Black or Colour copy that you're performing. If you're performing a Black copy from your HP Envy, only the black cartridge will be used. If you're performing a Colour copy from your HP Envy, only the colour cartridge will be used. Therefore, you cannot perform Black copies with the Tri-Colour cartridge.
    When you print from your computer, the computer may send the print job to the printer as an image file. Therefore, even if you are printing a black only document, colour ink may be used to enrich the document. Should this happen, you would be using colour ink without even realizing it.
    On your computer you can set your printer to Black Ink Only if you do not want colour to be used in black and white documents. However, in order for me to walk you through adjusting this setting, I will need to know what Operating System you're using on your computer.
    What's my OS?
    I hope this helps clear up any confusion
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Hp8600 b/W printing issue

    When I print or copy I SELECT black unless I need color. Today I need to copy very important materials to mail, I am disabled, cannot run to the store, and I can't copy because the yellow is empty. Why is the yellow toner empty if I am selecting black and why is the black toner still full? I am sitting right here selecting black in the copy setup for the print job.

    Hey @Nwad59,
    Welcome to the HP Support Forums!
    I understand that you're needing to copy in black. However, you're not able to do so as your yellow ink cartridge is empty in your HP Officejet Pro 8600 Plus e-All-in-One Printer. I would like to assist you with this today.
    When you perform a copy on your HP Officejet Pro 8600 Plus e-All-in-One Printer and choose 'black copy' the printer will only use black ink to perform the copy. Also, when you choose 'colour copy' the printer will only use colour ink to perform the copy. However, when you print from any device and choose black the printer will use colour ink to enrich the black when printing. Therefore, your colour ink levels may go down with black print jobs from your computer or other devices.
    You can adjust this setting on your computer to set the printer to 'use black ink only' when printing. Therefore, the colour ink will not be used unless you're specifically printing in colour. If you're using an Ipad to print from you can load the HP ePrint Home and Biz app : Getting Started with HP ePrint Mobile Apps and that should provide you with the ability to specify colour, black only or greyscale printing.
    Unfortunately at this time, because your printer is in a 'depleted yellow' error state, you will need to replace your yellow cartridge to continue using the printer. Even if you only want to perform black copies, the yellow will need to be replaced as your printer is in an error state at this time and will not perform any function until that error state is cleared.
    Please let me know if this information clears up any confusion about ink usage. Once you replace your yellow cartridge, should you have any issues setting the printer to 'black ink only' I will be more than happy to guide you through those steps. Best of luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Automated Testing of Forte Applications

    Dear Jim,
    This is a technical and education Forum and I want to make sure everyone is
    "educated" to your options out there. Our company specific purposes is
    delivering testing solutions for Forte Developed applications. (Primary
    responsibility is to help developers and qa staff) I have tried to answer
    you questions as follows and to educate fellow Forte people on solutions
    available to them. If you need more discussion about our tools, please
    contact me directly.
    To anyone interested in testing Forte Applications:
    1) What product are developers using to automate the process of testing
    Forte applications?
    IQTest- Unit Level Testing Tool that tests specific Forte methods and
    saves them for automatic regression testing.
    IQTrace: Unit Level Pathway Testing. Tests specific method level and
    functional threads and saves them for automatic regression testing.
    2) If there is a tool, how long does it take to create a typical test?
    - Class I.Q. automatically generate the test classes and instantiates the
    object under test. A typical setup for a developer is about 30 minutes
    which is done once. The actual process of testing methods or traces takes
    seconds. All tests are saved to any Forte database for automatic
    regression testings.
    3) Can the test include the testing of persistance to a database?
    Yes, Our products are written to test persistance in a database and all
    fully supported to test service objects which is currently a major issue
    that most development teams are running into problems with.
    4) What type of testing can be performed: black box testing, white box
    testing, integration testing, UI testing, etc.?
    Class I.Q. is considered a "White Box" approach to testing. It is
    exercising the source code and creating an output for each method call.
    The test cases then are dynamically linked into a trace.
    Some of the features of Class I.Q. Products:
    - Automatic Test Class Generation
    - Saving of Test Cases and Test Traces
    - Groups A queue for Different Testing Responsibilities
    - Linking to Any Forte Supported Test Configuration Product
    Thank you,
    Any additional questions please call or email me directly.
    Joe Burns
    Class I.Q.
    610-254-5151
    [email protected]
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    We have used JMETER from Apache foundation. This is more a stress test tool, but you can also use it for unit testing, as it allows you to record a serie of HTTP requests.
    Since your question is not related to JHeadstart, you better post this question on the JDeveloper forum.
    Steven DAvelaar,
    JHeadstart team.

  • How to change string text in xaml

    I have string text in ListPickerItem like this
    <toolkit:ListPicker x:Name="items" FullModeHeader="Items" Background="White" Margin="10,280,14,0" VerticalAlignment="Top" Foreground="Black" FontSize="25.333">
    <toolkit:ListPicker.Header>
    <TextBlock x:Name="Choose_Items" Opacity="0.8" Text="Choose Items" Foreground="White"/>
    </toolkit:ListPicker.Header>
    <corelib:String>item1</corelib:String>
    <corelib:String>item2</corelib:String>
    <corelib:String>item3</corelib:String>
    <corelib:String>item4</corelib:String>
    <corelib:String>item5</corelib:String>
    <corelib:String>item6</corelib:String>
    <corelib:String>item7</corelib:String>
    <corelib:String>item8</corelib:String>
    </toolkit:ListPicker>
    So in code I want to change this text by the resource each string have another value like this
    And the code is
    Public Shared Iterator Function FindVisualChildren(ByVal obj As DependencyObject) As IEnumerable(Of DependencyObject)
    If obj IsNot Nothing Then
    For i As Integer = 0 To VisualTreeHelper.GetChildrenCount(obj) - 1
    Dim child As DependencyObject = VisualTreeHelper.GetChild(obj, i)
    If child IsNot Nothing Then
    Yield child
    End If
    For Each subChild In FindVisualChildren(child)
    Yield subChild
    Next
    Next
    End If
    End Function
    Private Sub Change()
    Dim rm As New ResourceManager("App.Resource1", GetType(MainPage).Assembly)
    Dim main As Grid = ContentPanel
    Dim result = FindVisualChildren(main)
    Dim ST = result.OfType(Of String)()
    For Each item In ST
    item = rm.GetString(item.Text)
    Next
    End Sub
    So How I can make right code to run like this problem ??
    Thanks :)

    Hi Shay Boshra,
    Based on your description, it seems that you want to change the ListPickerItem content based on the resource file, if I do not misunderstand you, an easy way to implement it is that first you can define the ListPicker as following:
    In the MainPage.xaml:
    <toolkit:ListPicker x:Name="items" Background="White" Margin="0,-11,24,0" VerticalAlignment="Top" Foreground="Black" FontSize="25.333">
    <toolkit:ListPicker.Header>
    <TextBlock x:Name="Choose_Items" Opacity="0.8" Text="Choose Items" Foreground="White"/>
    </toolkit:ListPicker.Header>
    <toolkit:ListPickerItem Content="item1"></toolkit:ListPickerItem>
    <toolkit:ListPickerItem Content="item2"></toolkit:ListPickerItem>
    <toolkit:ListPickerItem Content="item3"></toolkit:ListPickerItem>
    <toolkit:ListPickerItem Content="item4"></toolkit:ListPickerItem>
    <toolkit:ListPickerItem Content="item5"></toolkit:ListPickerItem>
    </toolkit:ListPicker>
    <Button Content="Change Text" HorizontalAlignment="Left" Margin="20,446,0,0" VerticalAlignment="Top" Click="Button_Click" Width="299"/>
    In the MainPage.xaml.cs:
    Private Sub Button_Click(sender As Object, e As RoutedEventArgs)
    Dim ResourceManager As New ResourceManager("App.Resource1", GetType(MainPage).Assembly)
    For Each listpickitem As ListPickerItem In items.Items
    listpickitem.Content = ResourceManager.GetString(listpickitem.Content.ToString())
    Next
    End Sub
    The result:
    Best Regards,
    Amy Peng
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • K8N master2-far doesn't detect Areca 1220 raid controller

    Today i purchased the last components for my system. Everything works perfectly except for my Areca 1220 8x pci-e raid controller. As i feared the controller is nowhere to be seen, not in the bios, not in windows. I already had bios version v1.10 but flashed the bios version on the msi site anyway. Nothing changed. On the msi site under "QVL" i see my Areca at the bottom of the list. Does that mean that this MB can work with this controller? What must i do to make it work? I think i have to see it at least in the bios!
    Your help is appreciated. Now 5x 300 GB of storage is doing nothing.
     

    Quote from: Bas on 10-November-05, 20:30:00
    Maybe you need to update the cards firmware.
    I already looked into that matter and found out that the only way to upgrade the firmware or bios is to use their http tool McRAID Storage Manager. This of course is done in windows. Now windows doesn't see my Areca 1200 and so McRAID doesn't see it either. I can't update my Areca.
    This problem is well known by the motherboard manufacturers. Let me quote something from the Areca site:
    Q10150407 - Is there any socket 939 motherboards that work with your model ARC-1210 raid controller? In a SLI board I would use one 16x slot for Graphics card.
    Our PCIe ARC-12xx series controller uses Intel IOP332/333 processor. The Intel high performance IOP (IOP331/332/333) has integrated the bridge chip in the controller. But the original NVIDIA nForce4 SLI chipset BIOS has the problem after Bridge IRQ routing. All controllers use Intel new IOP 332/333, such as Areca, Intel, and LSI have the same IRQ routing problem. Those NVIDIA 939 M/Bs can be worked in the Windows environment. Due to the Windows system takes over the BIOS job, and Linux & FreeBSD need to use the M/B BIOS, so it has problem with our PCIe controller.
    Currently, DFI, Ausu, MSI and Gigabyte have BIOS to solve the problem. If you have problem in this kind of mainboard, please try to manufacture latest BIOS.
    We have tested DFI Lanparty NF4 SLI & ASUS A8N-SLI Deluxe, and Asus A8N-SLI Premium. It works very well with our firmware 1.38 and newest mainboard BIOS. Try to swap the graphic and our controller, if you find some warm boot problem in the Asus A8N-SLI Premium.
    I still think i need an updated bios for the k8n master2-far (ms-9620). The fact remains that there are problems reported with every SLI motherboard. I knew this already from the socket 939 platforms. I was sceptical about the k8n master2-far but thought that a server MB should have no problems. I did ask a question about this however at the shop where i bought this MB. I even found an reply from you to another user who had similar concerns about the Areca controllers and an SLI MB. You said that it should not be a problem. Even so i always kept the possibily open that this problem can happen. And here i am 
    Thanks for your help. More input is always appreciated as i am still waiting for an answer from MSI in the Netherlands about this problem. Right now my server is doing nothing. I hope my raid controller will work very soon.

  • K7N2-L cannot load MCP Networking drivers in Win98

    My system is new and consists of:
    K7N2-L mobo
    AMD XP 2500 CPU
    2 x 512 MB Twin Muskin DDR High Performance Black modules
    All in Wonder ATI 7500
    120 GB WD HD
    I think that I have set up my Bios correctly and have installed Win 98 without any problem. All drivers loaded ok from the included CD, except for the nvidia nforce MCP Networking Adapter.  
    Everytime I reboot my OS recognizes that the onboard networking adapter is present, but I cannot load it.
    I don't see that anyone has had this probem in this forum and wondered if perhaps it has anything to do with the MAC Address which is in the default (disabled) mode.  
    If I should have MAC Address enabled, how do I find out what Mac Address to use?
    I would be very appreciative of any suggestions anyone would be kind enough to make.
    TIA
    John  ?(  ?(  ?(

    Jef, first thanks for the quick response.  
    Yes, I'm using win98, not SE, which I had read somewhere else (after I loaded it)would not work.  Since all other drivers loaded properly I was hoping I would be lucky and it would be ok, but I suspected it might be my problem. Thank you for verifying it.  
    Also, in MSI FAQ it mentioned MAC address was on the ACR slot, but I didn't see it.  Your mirror suggestion was the trick, but I wonder why MSI puts it towards the case side so that it so damn hard to see?
    If I read backwards correctly, my MAC address is 0010DCE2D88B on what looks like a bar code sticker. I remember somewhere reading that the MAC was a combination of 12 letters and numbers which would fit this number.  Does this sound right to you?  There is also another sticker, but the writing is so small, I cannot make out what's on it.
    Since I'm this far along, and will need to purchase Win98 SE or XP, I will try putting in these numbers and see what happens and let you know (I'm not too hopeful though).
    Again, I appreciate your help.
    John  
    Quote
    Originally posted by jefn
    Hi John -
    Point of clarification: you have installed Windows 98SE?  The nForce chipset and drivers doesn\'t support the original Windows 98.
    Yes, you need to have the MAC address enabled.  The MAC address should be on a sticker on the motherboard.  You\'ll likely need a small mirror to read it as it\'s probably located on the side of your last card slot.
    Jef

  • Duplicated media files

    Hi Guys,
    My wife has 620, and she loves it, but she has one major gripe with it. Any song or video transfered to the phone gets duplicated, sometimes even more copies are created. I tried all sorts of the stuff from the internet to sort it out, but no joy so far. Is there any official fix coming from Nokia or MS? I'll list what did not work so far:
    - syncing the songs via WP app
    - syncing via Media Player
    - copying the files using explorer
    - using different SD cards
    - copying the stuff directly to the phone's memory
    - changing the sync options in the media player
    - deleting all media files and syncing them in different ways again
    - restoring the factory settings
    - performing black morris at midnight for a week - I really ran out of ideas
    I have checked MS forums, they say the issue was fixed in an update, but I can say that it is not fixed. So if you have any other tricks up in your sleeve please let me, and other users know.
    Thanks 
    Moderator's note: We have provided a subject-related title to help other forum users easily view and respond to this post.

    Hi DrDoom666,
    Welcome to the forum! 
    We suggest trying to recover the phone's software using the Nokia Software Recovery tool. Please check this link for more information about this PC application: Nokia Software Recovery Tool 
    Since this step erases all phone data, best to create a backup first to avoid data loss. Here's how: Backing up your stuff
    Let us know how it will go. 
    Moderator's note: We have provided a subject-related title to help other forum users easily view and respond to this post.

  • How Many User Accounts Are Possible?

    I am doing Mac support for a pre-school where they have five Macs, two of which are older iMacs which will only take OS X Panter installs.
    We have 37 teachers, about 24-32 of whom will be using them for mail and on a more limited basis, for other things.
    They'd like to keep their mail private and I assume other things as well, so my question is: is there a limit to the number of user accounts possible on a Panther machine? I'm guessing we'd eventually like to set up no more than 16 per machine if it's possible to do so without negatively impacting the performance of these iMac 333 computers. They are just barely fast enough to do email, web and word processing etc., so I don't want to slow them down in any way.
    . . . and naturally, I won't be setting up fast user switching!
    Any input would be appreciated.
    JoeL

    Thanks to Aldo and Niel for your quick responses!
    Just as an experiment, to see how much room a raw account takes up, I used the disk utility to monitor disk space used on the OS disk and looked at:
    The space used on the drive with one account (the one I have extant).
    After having created a 2nd (non admin) account (but not logged in to it yet).
    After logging into that account and creating one textedit (one word) document.
    After deleting that account immediately (leaving my one account).
    After logging out and back in again to my original account.
    The results are as follows:
    Disk Space Used (in Bytes):
    168,212,189,184 one account
    168,213,803,008 two accounts (not logged in)
    168,213,823,488 two accounts (logged in/one doc)
    168,211,394,560 one account (2nd acct deleted immediately)
    168,211,451,904 one account (logged out & back in)
    There does seem to be a variability of disk space usage even in the act of logging out and back in with no other activities, but the creation of an account seems to take up very little actual space (as I expected) and I assume, with some variability due to the creation of email accounts & etc, that there would be an acceptable difference between 16 teachers using the same account and creating email and documents and 16 teachers creating 16 accounts and creating email and documents.
    These computers don't have the power to run fast user switching without a loss of usability, so I tested the time to switch accounts manually and it's less than booting up, so this is probably the best approach.
    Thanks again!
    JoeL

  • IMac late 2009 gives beach ball. All test return normal.

    I have an iMac late 2009 model 27 inch. update to Mavericks (10.9.1)
    Returning from holiday, I found my iMac dead slow, with spinng beach balls on every click. Until now I have done ....
    Create new user account, logged in as this new user.
    reset PRAM / NVRAM
    boot up in safe mode
    boot up in recovery mode, perform disk test. (all normal)
    I managed to copy the most important directories to an external storage. Got more and more read/write errors.
    iMac had become unusable slow.
    Made bootable USB stick, used this to boot and did a complete HD erase.
    Clean installed Maverick.
    Problem still persist.
    Performed AHT (Apple Hardware Test) in extented mode. No error founds.
    Performed Black Magic Disktest, around 110 MB/s seems normal speed.
    After reboot, the first application start up fast (which gives me hope) but starting the second app, takes several minutes with this spinning beach ball.
    Anyone here having simular problems or otherwise can point me to a solution?

    Thanks for you advise. I did a clean install, so without any third party software like Trusteer Rapport.
    On you advice I ran EtreCheck. This is the result:
    Hardware Information:
              iMac (27-inch, Late 2009)
              iMac - model: iMac11,1
              1 2.8 GHz Intel Core i7 CPU: 4 cores
              8 GB RAM
    Video Information:
              ATI Radeon HD 4850 - VRAM: 512 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 1:58:8
    Disk Information:
              WDC WD20EARX-00PASB0 disk0 : (2 TB)
                        EFI (disk0s1) <not mounted>: 209,7 MB
                        Macintosh HD (disk0s2) /: 2 TB (1,98 TB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              OPTIARC DVD RW AD-5680H 
    USB Information:
              Apple Inc. Built-in iSight
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Internal Memory Card Reader
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
    Launch Agents:
    User Launch Agents:
    User Login Items:
              iTunesHelper
    Internet Plug-ins:
              Default Browser: Version: 537 - SDK 10.9
              QuickTime Plugin: Version: 7.7.3
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    3rd Party Preference Panes:
              None
    Bad Fonts:
              None
    Old Applications:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   2%          WindowServer
                   2%          Mail
                   1%          Safari
                   1%          com.apple.WebKit.Networking
                   1%          hidd
    Top Processes by Memory:
              139 MB          softwareupdated
              115 MB          Safari
              98 MB          com.apple.IconServicesAgent
              90 MB          mds_stores
              74 MB          Finder
    Virtual Memory Information:
              4.57 GB          Free RAM
              2.15 GB          Active RAM
              612 MB          Inactive RAM
              697 MB          Wired RAM
              264 MB          Page-ins
              0 B          Page-outs

  • Satellite L10-333: Display stays black until I tap the edge of the screen

    I have a Satellite L10-333 which is about 3 years old, it has suddenly began to have screen problems.
    It started with a white screen instead of the normal one, and a black line all the way down the middle.
    Now when I turn the pc on, the screen stays black and dead until I tap the edge of the screen and when the screen comes to life, I have to hold and press a certain part of the lid so the screen stays on...
    Does someone know what the problem is??
    I thought it could be a loose wire or connection.
    Does anyone else have or had this problem?
    Thanks for your help..

    I agree with you. It must be some contact problem. In my opinion it is not important if someone else has this problem too and you must find solution as soon as possible.
    The notebook must be disassembled and the screen connection must be checked. Now is the question what to do. Can you check it alone or you need professional help?

  • On the iPhone 5s, performing any edit on a black and white photo will render a strong purple tone. This occurs in any app under the current iOS. Sadly, every photo must then be re-edited to restore the original black and white.

    On the iPhone 5s, performing any edit on a black and white photo will render a strong purple tone. This occurs in any app under the current iOS. Sadly, every photo must then be re-edited to restore the original black and white. If others have experienced similar troubles, any feedback would be greatly appreciated.

    Hi everyone, I'm the one from the example above posted by @frankensinatra and I can confirm having the same problem.
    But I want to add something. The problem is not only related to black and white but to every picture, and it can be worse or not depending on the range of colors involved. Apparently, there is a shift between some RGB value that is going to remove some green producing a magenta look.
    I've started contacting some developer about this problem and some of them is trying to understand what's going on.
    In my case, the problem came up when I bought the new iPad mini Retina. I didn't have this problem with the previous iPad mini. Same OS for both devices.
    The photo you see in the link above is a perfect example of what happens just going from one app to another and saving to the camera roll. In that case, the situation doesn't change if I send that picture from within the app by email, or to another app using the "open in..." feature. It keeps being purple. And the problem can be reproduced all the time.
    Have some of you noticed the same?

  • The Black Dream by C.333

    The Black Dream by C.333
    Hello everyone, my name is Ermanno but my nik is Corsaronero333.
    I was invited to post here my next job
    of course, forgive my English, I use a translator
    For me, this forum is new and correct me if I wrong
    Thanks for your cooperation

    The work continues, and today I made a window to see the Raid 0 of ssd Kingston Hyperix 3K

  • Performance difference 1T caviar Black 64cache vs 1T Samsung F3 ?

    Hello to all.
    Been lurking here trying to figure out a new build.
    Never built a PC before. Can't be that hard with helpful forums like this one.
    I'm looking to build a i72600k based system with 2xraid0 and an additional HD for OS.
    If there a big difference between the caviar and the F3 in real world performance when being used onboard raid0?
    The price savings when buying 4 drives can add up.  Tring to build a BFTB system.
    My intended purpose in building a new system is editing video from my new Panasonic HDC-TM700.
    As well as editing video, I'll be purchasing CS5 Master and use Photoshop quite a bit as well as the other software that comes with the master collection.
    Thanks for your help.
    James

    Jim
    I've been reading up on this since late last fall. The problem is the more I read, the more I realize I have to learn.  I can build just about anything and enjoy the challenge. Not looking to place in the top few on the PPBM, Just looking to get a fast system that will require a minimum amount of power as well.  One of the reasons I'm looking at the more expensive/efficient PSU. I  Not sure I want to go with the SSD raid0 for OS.  Thought most people said to run away from raid0 for the OS.
    To answer your A&B I posted the list below.
    Trying to use this as a UPS backup.
    http://www.ultraproducts.com/applications/searchtools/item-details.asp?EdpNo=1815470&pagen umber=2&RSort=1&csid=ITD&recordsPerPage=5&body=#ReviewStart
    And this for NAS backup:
    Update22-108-065
    Synology DS211J Diskless System DiskStation 2-bay NAS Server for Small Office and Home Use
    Model #:DS211J
    Item #:N82E16822108065
    Return Policy:Standard Return Policy
    In Stock
    Note (Add22-108-065)
    Save                                      Cancel
    $209.99
    $209.99
    Update22-152-245
    SAMSUNG Spinpoint F4 HD204UI 2TB 5400 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
    Model #:HD204UI
    Item #:N82E16822152245
    Return Policy:Standard Return Policy
    In Stock
    Note (Add22-152-245)
    Save                                      Cancel
    $89.99
    -$10.00 Instant
    $159.98
    Subtotal:
    $369.97
    Here's what's on the wishlist as of now.
    1
    ASUS P8P67 PRO (REV 3.0) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
    Item #: N82E16813131703
    Return Policy: Standard Return Policy
    $189.99
    1
    Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor BX80623I72600K
    Item #: N82E16819115070
    Return Policy: CPU Replacement Only Return Policy
    $314.99
    1
    CORSAIR Professional Series AX750 750W ATX12V v2.31 / EPS12V v2.92 80 PLUS GOLD Certified Modular Active PFC Power Supply
    Item #: N82E16817139016
    Return Policy: Standard Return Policy
    -$10.00  Instant
    $20.00 Mail-in Rebate Card
    $179.99
    $169.99
    2
    Mushkin Enhanced Blackline 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model 996776
    Item #: N82E16820226099
    Return Policy: Memory Standard Return Policy
    $199.98
    1
    Rosewill RCR-IC002 74-in-1 USB 2.0 3.5" Internal Card Reader w/ USB port / Extra silver face plate
    Item #: N82E16820223109
    Return Policy: Standard Return Policy
    $16.99
    4
    SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
    Item #: N82E16822152185
    Return Policy: Standard Return Policy
    -$5.00  Instant
    $279.96
    $259.96
    1
    LITE-ON SK-1788/BS 2-Tone PS/2 Wired Standard Keyboard
    Item #: N82E16823107120
    Return Policy: Standard Return Policy
    $7.99
    1
    SAMSUNG Spinpoint F4 HD322GJ/U 320GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
    Item #: N82E16822152244
    Return Policy: Standard Return Policy
    $42.99
    1
    Microsoft Wheel Mouse Optical
    Item #: N82E16826105185
    Return Policy: Standard Return Policy
    $15.99
    1
    GIGABYTE GV-N460OC-1GI GeForce GTX 460 (Fermi) 1GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
    Item #: N82E16814125333
    Return Policy: VGA Standard Return Policy
    -$15.00  Instant
    $20.00 Mail-in Rebate Card
    $204.99
    $189.99
    1
    COOLER  MASTER Hyper 212 Plus RR-B10-212P-G1 "Heatpipe Direct Contact" Long  Life Sleeve 120mm CPU Cooler Compatible Intel Core i5 & Intel Core  i7
    Item #: N82E16835103065
    Return Policy: Standard Return Policy
    $34.99
    1
    LG Black 10X Blu-ray Burner - Bulk SATA WH10LS30 LightScribe Support
    Item #: N82E16827136181
    Return Policy: Standard Return Policy
    $89.99
    1
    ViewSonic VP2365wb Black 23" IPS LCD Monitor w/4-port USB hub, height&pivot adjustment
    Item #: N82E16824116421
    Return Policy: Monitor Standard Return Policy
    -$40.00  Instant
    $329.99
    $289.99
    1
    ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner - Bulk - OEM
    Item #: N82E16827135204
    Return Policy: Standard Return Policy
    $20.99
    1
    Microsoft Windows 7 Professional 64-bit 1-Pack for System Builders
    Item #: N82E16832116758
    Return Policy: Software Standard Return Policy
    $139.99
    1
    COOLER MASTER HAF X RC-942-KKN1 Black Steel/ Plastic ATX Full Tower Computer Case
    Item #: N82E16811119225
    Return Policy: Standard Return Policy
    -$10.00  Instant
    $10.00 Mail-in Rebate
    $199.99
    $189.99

  • 333 Trayloader -9.2.2-setting up for charitable donation, screen went black

    I planned on giving my old 333 trayloader to a local organization that cares for abused and difficult kids.
    It was working fine, I reformatted the HD and reinstalled OS 9.2.2, everything went fine.
    I then went to install an old copy of the STARRY NIGHT Astronomy program left it loading and when I came back the screen was black, the on/off button on the display is orange.
    I couldn't shut it down with the power button on the keyboard but when I hit the orange button on the display it shut down and the orange light went out.
    I can turn it back on again with either the power button on the keyboard or the one on the display. When I hit either one the CAPS LOCK light blinks once very quickly, the machine chimes and the power light on the display immediately goes orange, the screen stays black.
    I can only turn it off with the button on the display, I cannot turn it off with the button on the keyboard.
    I tried zapping the PRAM, it only chimes the one time and then nothing else happens.
    Was I lucky enough to be present when my video board went bad?
    Appreciate any help, I'd like to see if I can get this going so these kids have something to use.
    Thanks, Rob

    That's too bad. A video board problem now seems more likely. Since it's a 333 MHz iMac, and you mentioned having a few other iMac, so if they are slower tray-loader iMacs, you can take this 333 MHz board and replace one of the slower boards.
    Or you can keep the board (and RAM) as spare parts. The CPU board is just the small +daughter card+ that connects to the motherboard, and where the RAM is installed.
    You can actually test to see if the problem is the analog video board. Take the bottom panel off. You will see an internal cable that looks like a video cable; it is one of the cables you disconnected when you pulled out the internal chassis. Leave the other cable or cables connected; just disconnect the one that looks like a video cable.
    Now try to start the iMac. If the problem is on the analog video board, your iMac will now start up normally. You have bypassed using the analog video board, so the startup self-test does not fail and the iMac starts up. Obviously, you won't see anything on the display, but by the sounds it makes, you should be able to tell that it is running normally. Note: You can shut down without video by waiting until it completes the startup, and then pressing the power button, followed by the Return key.
    You can use it this way, by getting an adapter for the internal video connector (about $5 on eBay) and attaching a standard VGA cable and VGA display. If you want more info about doing so, please post back.

Maybe you are looking for