Performance in report RSUSR100N - additional information

The verification of change documents for role assignements (new with rsusr100n) takes pretty long.
With [SAP Note 1648187|https://service.sap.com/sap/support/notes/1648187] the possibility to improve the performance is provided.
Nevertheless, regular archiving of the change documents is recommendable (not only for the role assignement change documents). Required information is provided with [SAP Note 419933|https://service.sap.com/sap/support/notes/419933] .
b.rgds, Bernhard

additional note:
[SAP Note 1704771|https://service.sap.com/sap/support/notes/1704771]

Similar Messages

Additional information in SDP alert report

Hi Experts,
We are generating SDP alert for "Stock below safety stock( DB alert)".
Their is a reqiurenment to add some addtional information in the output of the alert to display the SOURCE LOCATION and Shortfall qty(diff between Act and Target qty). These data is not available in standard layout of the alert report.
What's the way to get these additional information in alert report?
Regards
Shankar D

Hi Shankar,
Try using the BAdi
/SAPAPO/AM_ALERTLIST
With the method MODIFY_ALERTLIST, you can append additional fields
to an alert type and also change existing fields
Change parameters:
T_FIELD_CAT Alert-object-typical field catalog of the alert types
T_ALERTS List of alerts
Please confirm your findings
Regards
R. Senthil Mareeswaran.

CR VS 2013 error: Additional information: Failed to load database information.

We have VS 2008 (V9.0.30729.1 SP1) using .Net 3.5 under Windows Server 2003 R2 Data Center Edition. VS 2008 came with Crystal Reports Version 10.5.3700.0. We developed a little report in a winform to run against Oracle 11gR2 using the OLE DB support in the CR Report Wizard in the VS 2008 IDE. It was a standard report with some code to print the report directly to the printer with out the viewer control. Here is the working code:
Imports System.Data.OleDb
Imports System.Data
Imports System
Imports System.Windows.Forms
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
    Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
        Dim crReportDocument As New CrystalReport1()
        Dim DataSet1 As DataSet
        Dim adoOleDbConnection As OleDbConnection
        Dim adoOleDbDataAdapter As OleDbDataAdapter
        Dim connectionString As String = ""
        connectionString = "Provider=OraOLEDB.Oracle;"
        connectionString += "Data Source=OURDBNAME;"
        connectionString += "User ID=OURUSERID;Password=OURPSW"
        adoOleDbConnection = New OleDbConnection(connectionString)
        Dim sqlString As String = ""
        sqlString = "SELECT * FROM edi_filing_source_lov where filing_source_code in ('A','E')"
        adoOleDbDataAdapter = New OleDbDataAdapter(sqlString, adoOleDbConnection)
        DataSet1 = New DataSet()
        adoOleDbDataAdapter.Fill(DataSet1, "edi_filing_source_lov")
        crReportDocument.Database.Tables(0).SetDataSource(DataSet1)
        crReportDocument.PrintOptions.PrinterName = "HP_LaserJet_4350_PCL_5e_Info_Tech"
        crReportDocument.Refresh()
        crReportDocument.PrintToPrinter(1, False, 1, 99)
        Me.Close()
    End Sub
End Class
We want to migrate this report to VS 2013. We installed VS 2013 Professional (V12.0.30110.00 Update 1) under Windows Server 2012 R2 Data Center Edition. We downloaded CRforVS_13_0_9 and installed it in VS 2013. We moved the project from VS 2008 and opened it under VS 2013. It looks like it converted OK. When we run it we get the following error:
An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in CrystalDecisions.CrystalReports.Engine.dll
Additional information: Failed to load database information.
Error in File temp_f11eb1be-db98-4d33-800c-4db3b36ab14e {EEB2A9E4-8239-49CB-B016-8CE4F4C7643E}.rpt:
Failed to load database information.
More information: We can step through the wizard in VS 2013 using the standard template and add a report viewer control to the form and point it at the report and run it just fine in the VS 2013 IDE when there is no code in the form1_load event. We feel we have the Oracle.DataAccess.dll for the 11.2.0 client installed and tested correctly on the server and do not feel there is an issue with data base installation. When we add back the code above to the form1_load event and run it we get the error above.
We have the logger set up but nothing gets added to the log files.
We have tried three different ways to set the data source to resolve the error that is occurring at this line of code that is failing but with no luck:
crReportDocument.Database.Tables(0).SetDataSource(DataSet1)
crReportDocument.SetDataSource(DataSet1)
crReportDocument.Database.Tables(0).SetDataSource(DataSet.Tables("edi_filing_source_lov"))
Do you have any other suggestions we could try?
Bruce

Hi Bruce
In my experience, the only reason for the error is that the there is an issue with the dataset and as a back up sort of a thing, the report engine is attempting to connect to the database the report was created off of. To test the dataset with the report, see this wiki on how to.
Also, ensure that you have a look at this KBA.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Customer or vendor master data to include additional information ?

Any standard Report of customer or vendor master data to include additional information ?

Hi Goutam
Can you please be specific??
When you say standard report, what do you mean by "to include additional information"??
Thanks
G. Lakshmipathi

Not able to see the additional information fields in OIE

Hi,
After applying some patches in OIE, the additional information fields in expense report are not visible.
In Internet Expenses setup and Administration, these fields are set as 'Required'.
When we try to save the expense report, it is throwing an error that these fields are required.
But these fields are not visible to enter the information. Is any setup required for the same ?
Please advice.
Regards,
Manjusha.

Hi,
We have already bounced the apache and checked.
It is still the same.
We noticed just now that it is working for some Operating units.
Is there any way to find out what is missing in the required operating unit?
Regards,
Manjusha.

DFSR Replication Event ID 1202 The DFS Replication service failed to contact domain controller Additional Information: Error: 160 (One or more arguments are not correct.)

Hi,
hummmm...
The client had 1 Server with AD and All Apps, IIS, Terminal Servers (30 device Cal), File Server, SQL2008R2 on it
Task: Install new AD server promote it to DC, bring in 2nd server, Replicate the File Server (DFSR) on these 2 servers, and demote it to standard server.
1) Old AD with name "Server" with OS-2008R2 SP1 and is a DC.
2) Brought in a new server "PrimaryAD", Installed 2008R2, done DC Promo, and added it as Additional Domain controller
3) Transferred roles from old server "Server" to "PrimaryAD"
4) Brought in a new File Server replicating server "Backup-Server"
5) Copied all the data from Server to Backup-server as DFS initial file sync with robocopy
6) here the problem started, after the copy finished, next morning the "Server" server crashed.....
7) thank god the data was backed up on Backup-server. but we didnt get the time to Demote the server "Server" and remove AD from it.
8) Since AD was replicated so "PrimaryAD" was are DC, brought 2nd Server "SecondaryDC" as additional domain controller.
9) we cleaned up the metadata and used ASIEDIT to clean the remaining stuff.
10) the "Server" server was formatted and renamed as "Primary-Server" and OS2008R2 SP1 was installed with rest of required apps
11) so now the PrimaryAD the DC, SecondaryAD the Additional Domain controller, Primary-Server the mail server and File server, the Backup-server, the replicated server.
Now configured DFS Replication from Primary-Server to Backup-server and receive following Event ID 1202
If i Configure DFS Replication as follows
PrimaryAD <<>> SecondaryAD -= Works... no errors...
PrimaryAD <<>> Backup-Server = Creates but Dosent works Event ID 5012, error The DFS Replication service failed to communicate with partner BACKUP-SERVER, Additional Information: Error: 9026 (The connection is invalid)
PrimaryAD <<>> Primary-Server = Dosent creates replication job just hangs,
on primaryad continious Eveni ID 10009, DCOM was unable to communicate with the computer "SERVER" using any of the configured protocols
......something on PrimaryAD is still trying to connect to old corrupt AD server "Server"
No errors with AD replication, SYSVOL & Netlogon shares also working fine and accessible.
DFS Diagnose report says
DNS name: backup-server.mydomain.com
Domain name: mydomain.COM
Reference domain controller: -- (HERE there is NO DOMAIN CONTROLLER mentioned)
IP address: 192.168.1.248,192.168.1.251,::1
Site: Default-First-Site-Name
Forgot to mention, gave full rights with ADSIEDIT to DFSR-LocalSettings for all server to Administrator and read permissions to "Authenticated Users"
DFSRDIAG POLLAD throws following error
c:\Dfsrdiag pollad /verbose
[INFO] Computer Name: BACKUP-SERVER
[INFO] Computer DNS: Backup-Server.mydomain.COM
[INFO] Domain Name: mydomain
[INFO] Domain DNS: mydomain.COM
[INFO] Site Name: Default-First-Site-Name
[INFO] Connected to WMI services on computer: Backup-Server.mydomain.COM
[INFO] Invoke PollDsNow() method on Backup-Server.mydomain.COM
[ERROR] PollDsNow method executed unsuccessfully. ReturnValue: 12 (0xc)
[ERROR] Failed to execute PollAD command Err: -2147217407 (0x80041001)
Can anyone point me to any direction which can lead to resolution of this ERROR and make DFS_R work..
Thanks
bikram

Hi,
It seems that DCPROMO did its work without complaints, still the DFSR references remained in AD. You could refer to the article below to clean up the DFS Replication object.
How to remove data in Active Directory after an unsuccessful domain controller demotion
http://support.microsoft.com/kb/216498
In additional, please refer to the following thread to troubleshoot the issue:
DFS is not working anymore.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/953be9ef-e9e3-4885-a5c4-47fc475ba562/dfs-is-not-working-anymore?forum=winserverfiles
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Additional information: The sorting already exists

I am using VB .NET 2003 and Crystal Report XI.
The report has two sorting fields and I want to change the sorting order through programming. It has been working well until my computer died. After I got a new computer and set up everything, restored the source code from Source Safe, now everytime I try to change the sorting I get this error
An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in crystaldecisions.crystalreports.engine.dll
Additional information: The sorting already exists
Here is the code causing this error:
obj1.DataDefinition.SortFields.Item(0).Field = FieldDef
Where obj1 is a ReportDocument.
Does anyone know what is going on?
Thanks,
Alex

Hi, Alex;
I am not sure what the cause could be.
If you try a different report do you get the same results?
Have you installed the latest Service Pack for CR XI?
Regards,
Jonathan

Additional information: 3, Check errno.

At present, our operating system shows no disk space shortage. Nonetheless, a trace file for an error reported in the alert log shows that there was no space left on a device over the weekend without identifying the device or an affected file.
ORA-27045: unable to close the file
SVR4 Error: 28: No space left on device
Additional information: 3
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 4
The trace file does reference some Additional Information by a number (e.g., 3). Searching for a meaning for this number, I find that the number may represent some function. But, search does not identify the related function(s). Still, no meaning. The related error message (e.g., ORA-27045) in the Oracle Database Error Messages manual shows an Action: Check errno. The error number is itself? Still, no meaning. Where can I find helpful documentation for such references?

As requested, here is the entire trace file:
/u00/app/oracle/admin/xxxx/udump/xxxx_ora_8697.trc
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.8.0 - Production
ORACLE_HOME = /u00/app/oracle/product/9.2.0.1.0
System name:     SunOS
Node name:     bumblbee
Release:     5.8
Version:     Generic_117350-41
Machine:     sun4u
Instance name: xxxx
Redo thread mounted by this instance: 1
Oracle process number: 59
Unix process pid: 8697, image: oracle@bumblbee (TNS V1-V3)
*** 2008-12-21 06:20:49.922
*** SESSION ID:(59.21936) 2008-12-21 06:20:49.878
ORA-27045: unable to close the file
SVR4 Error: 28: No space left on device
Additional information: 3
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 4
Our physical DBA did mention a problem with the RMAN backups. But, how do y'all know it was the RMAN backups by looking at the trace file? The Additional information above seems undocumented. And, Check errno seems kind of cryptic without a more descriptive manual reference.

Build a project report with detail information

Hi,
I want to build a project report in BW and am not sure if my idea is feasable....
The report should consist of two parts:
the head part consists detailed information about a project like ID, status, owner, start date.
The body part contains information about a key figure 'worked hours' drilled down by department and drilled through by calendar month.
I am completely free where I want to store the data to have it available in the report. My idea was to store project head information in an ODS and to store the key figure 'worked hours' in a cube with the characteristics project, month and department.
What would be the best way now to build a report on these information. As far as I know, a normal query is always used to show key figures, but not detailed information of a project. How can I report the information that I want to show in the report header?
Thanks for any help!
Cheers
Tatjana

What is the source of the data coming?
if you are using a custom report and if u thinking data is not huge.. keep every thing in one ODS and drag in the reports of the required fields..
Regards,
Hari

Please restore e-mail or at least give us some real information. Tech support is almost smug in their response for additional information. The iCloud status page has said the same thing since yesterday. A real dis-service. My business depends on this!

Please restore e-mail or at least give us some real information. Tech support is almost smug in their response for additional information. The iCloud status page has said the same thing since yesterday. A real dis-service. My business depends on this! Any one have any suggestions not being offerd by tech support or Apple? Anything at all?

mdjb wrote:
I just lost a big opportunity to get a new client because of this!! almost 24 hours now without any email service. I was one of the original.mac customers. I am over this time to move on. It is an inferior product.
My sympathy, but, this is what you agreed to when you chose to use a free system: (From terms of service agreement, iCloud)
APPLE DOES NOT GUARANTEE, REPRESENT, OR WARRANT THAT YOUR USE OF THE SERVICE WILL BE UNINTERRUPTED OR ERROR-FREE, AND YOU AGREE THAT FROM TIME TO TIME APPLE MAY REMOVE THE SERVICE FOR INDEFINITE PERIODS OF TIME, OR CANCEL THE SERVICE IN ACCORDANCE WITH THE TERMS OF THIS AGREEMENT.
And this is no different from any other free service I'm afraid. Pay for your mail, then you have the right to expect service.

I have used the "description" spot in iPhoto for in-depth additional information for photos of my ancestors. Now I am wanting to know if there is a way to print the photos along with the descriptions; either photo by photo, or maybe more than one per page

I have used the "description" spot in iPhoto for in-depth additional information for photos of my ancestors. Now I am wanting to know if there is a way to print the photos along with the descriptions; either photo by photo, or maybe more than one per page, or possibly in some sort of booklet format. Thank you very much.

You can make a Book and have a photo on one side and your text description on the other.

Error on hover panel of people search result "We weren't able to find additional information"

In people search result while hovering over all result item, in the hover panel in the middle I can see a message "We weren't able to find additional information".
I saw a msdn post for the same question in this
MSDN Link
but there it is said that "If the person has no authored documents, then it will display this in the hover panel: We weren't able to find additional information."
But for my case the authored document is also shown.
Please find in the screen shot below marked in red:
Did I missed something?

Can you check for this issue in ULS Log file.
If this helped you resolve your issue, please mark it Answered

Why can I no longer fill in additional information on my adobe forms on pdf. At time this was an opposition. It will only allow me to type limited information?

Acrobat Reader
Why can I no longer fill in additional information on my adobe forms on pdf. At one time you could insert an icon that would allow you to type in additional information. It will only allow me to put in limited information?

Not a lot of information. Can you post a link to a sample of the form so others can see the how the form does not work.

Why can I no longer type in additional information on my pdf form. It will only allow me to type in limited information.

Why can I no longer type in additional information on my pdf form. It will only allow me to type in limited information.

Duplicate post.
Why can I no longer fill in additional information on my adobe forms on pdf. At time this was an opposition. It will only allow me to type limited information?

What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?

Hello All,
What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
Navigation
Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
Thanks & Regards
Ayesha

Thanks Sridar
If we use Number we cannot separate the cheque numbers with , or -
We need to enter numbers along with comma and '_' in cheque number field.
Thanks & Regards
Ayesha

Performance in report RSUSR100N - additional information

Similar Messages

Maybe you are looking for