Performance issue while updating the custom infotype records
Hi All
i have the info type with 80,000 records my requirement is to change the infotype wage type value to the certain hard coded values .
after populating the final internal table , in loop i am passing the records and updating the info type by using the hr_infotype_operation function module
i have done the coding like bellow .
loop at lt_infotype assigning < x>
at new pernr.
bapi_employee_enquee
endat.
hr_infotype_operation
at end of pernr .
bapi_employee_dequee.
endat.
end loop.
but it is taking nearly 15 hours to update all the records .please suggest me better solution for reducing the execution time .
Thanks & Regards ,
pramodh.m
The delay problem can be solved with HR_INFOTYPE_OPERATION by using it with another FM i.e. HR_PSBUFFER_INITIALIZE the delay happens because of buffer problem. Use HR_PSBUFFER_INITIALIZE inside the loop just before you call HR_INFOTYPE_OPERATION and you wont see that much delay.
Similar Messages
-
State code or status code is invalid while deactivate the custom entity record
Hi,
We have migrated to CRM 2013 and facing one issue while deactivating the custom entity record
Error- State code or status code is invalid: State code is invalid or state code is valid but status code is invalid for specified state code
when downloading the log, it is giving below error.
<s:Envelope xmlns:s="<faultcode>s:Client</faultcode><faultstring">http://schemas.xmlsoap.org/soap/envelope/"><s:Body><s:Fault><faultcode>s:Client</faultcode><faultstring
xmlns:xml="http://www.w3.org/XML/1998/namespace" xml:lang="en-US">-1 is not a valid state code on new_partner.</faultstring><detail><OrganizationServiceFault xmlns="<ErrorCode>-2147187704</ErrorCode><ErrorDetails">http://schemas.microsoft.com/xrm/2011/Contracts"><ErrorCode>-2147187704</ErrorCode><ErrorDetails
/><Message>-1 is not a valid state code on new_partner.</Message><Timestamp>2014-03-18T05:42:04.5523897Z</Timestamp><InnerFault><ErrorCode>-2147187704</ErrorCode><ErrorDetails /><Message>-1 is not a
valid state code on new_partner.</Message><Timestamp>2014-03-18T05:42:04.5523897Z</Timestamp><InnerFault><ErrorCode>-2147220970</ErrorCode><ErrorDetails /><Message>System.ArgumentException: -1 is not a valid
state code on new_partner.
Parameter name: stateCode</Message><Timestamp>2014-03-18T05:42:04.5523897Z</Timestamp><InnerFault xmlns:i="http://www.w3.org/2001/XMLSchema-instance" i:nil="true"
/><TraceText xmlns:i="http://www.w3.org/2001/XMLSchema-instance" i:nil="true" /></InnerFault><TraceText xmlns:i="http://www.w3.org/2001/XMLSchema-instance"
i:nil="true" /></InnerFault><TraceText xmlns:i="http://www.w3.org/2001/XMLSchema-instance" i:nil="true" /></OrganizationServiceFault></detail></s:Fault></s:Body></s:Envelope>
I checked into system, we have not customized the status reason. We have only two option value "Active"(1) and Inactive(2).
Also we don't have any plugin on SetStateDynamicEntity, we have only one plugin on create for that entity.
Did anyone face this issue? any pointer why its giving this issue??
Thanks in Advance.
Arvind
Regards, Arvindposting the trace log here..
# ScaleGroup:
# ServerRole: AppServer, AsyncService, DiscoveryService, ApiServer, HelpServer, DeploymentService, SandboxServer, DeploymentManagementTools, VssWriter, EmailConnector
[2014-03-18 04:13:32.491] Process: w3wp |Organization:d133c867-097c-e011-a247-02bf9d3bc4f8 |Thread: 62 |Category: Exception |User: 7492ef42-9460-e311-940e-002dd80b0ca0 |Level: Error |ReqId: fdb76819-9781-4299-9e45-2b6f296f4fce | CrmException..ctor
ilOffset = 0x7
at CrmException..ctor(String message, Exception innerException, Int32 errorCode, Boolean isFlowControlException) ilOffset = 0x7
at CrmException..ctor(String message, Exception innerException, Int32 errorCode) ilOffset = 0x5
at StatusCodeValidator.Validate(EntityMetadata entityMetadata, Int32 stateCode, Int32 statusCode) ilOffset = 0x54
at BusinessProcessObject.SetState(BusinessEntityMoniker moniker, Int32 newState, Int32 newStatusCode, BusinessEntity originalEntity, ExecutionContext context) ilOffset = 0x0
at BusinessProcessObject.SetState(BusinessEntityMoniker moniker, Int32 newState, Int32 newStatusCode, ExecutionContext context) ilOffset = 0x1A
at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) ilOffset = 0xFFFFFFFF
at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) ilOffset = 0x25
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) ilOffset = 0x89
at LogicalMethodInfo.Invoke(Object target, Object[] values) ilOffset = 0x4F
at InternalOperationPlugin.Execute(IServiceProvider serviceProvider) ilOffset = 0x57
at V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context) ilOffset = 0x58
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x65
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode,
ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion) ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId, Boolean traceRequest, OrganizationContext
context, Boolean returnResponse) ilOffset = 0x16A
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType) ilOffset = 0x3D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType) ilOffset = 0x24
at ilOffset = 0xFFFFFFFF
at SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) ilOffset = 0x241
at DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) ilOffset = 0x100
at ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) ilOffset = 0x48
at ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc) ilOffset = 0xC6
at MessageRpc.Process(Boolean isOperationContextSet) ilOffset = 0x62
at ChannelHandler.DispatchAndReleasePump(RequestContext request, Boolean cleanThread, OperationContext currentOperationContext) ilOffset = 0x256
at ChannelHandler.HandleRequest(RequestContext request, OperationContext currentOperationContext) ilOffset = 0xF1
at ChannelHandler.AsyncMessagePump(IAsyncResult result) ilOffset = 0x39
at AsyncThunk.UnhandledExceptionFrame(IAsyncResult result) ilOffset = 0x0
at AsyncResult.Complete(Boolean completedSynchronously) ilOffset = 0xC2
at AsyncQueueReader.Set(Item item) ilOffset = 0x21
at InputQueue`1.EnqueueAndDispatch(Item item, Boolean canDispatchOnThisThread) ilOffset = 0xD6
at InputQueue`1.EnqueueAndDispatch(T item, Action dequeuedCallback, Boolean canDispatchOnThisThread) ilOffset = 0x0
at SingletonChannelAcceptor`3.Enqueue(QueueItemType item, Action dequeuedCallback, Boolean canDispatchOnThisThread) ilOffset = 0x3D
at EnqueueMessageAsyncResult.CompleteParseAndEnqueue(IAsyncResult result) ilOffset = 0x61
at EnqueueMessageAsyncResult.HandleParseIncomingMessage(IAsyncResult result) ilOffset = 0x13
at AsyncResult.AsyncCompletionWrapperCallback(IAsyncResult result) ilOffset = 0x52
at AsyncThunk.UnhandledExceptionFrame(IAsyncResult result) ilOffset = 0x0
at AsyncResult.Complete(Boolean completedSynchronously) ilOffset = 0xC2
at ParseMessageAsyncResult.OnRead(IAsyncResult result) ilOffset = 0x43
at AsyncThunk.UnhandledExceptionFrame(IAsyncResult result) ilOffset = 0x0
at ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x70
at ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x4
at ReadWriteTask.System.Threading.Tasks.ITaskCompletionAction.Invoke(Task completingTask) ilOffset = 0x45
at Task.FinishContinuations() ilOffset = 0x67
at Task.Finish(Boolean bUserDelegateExecuted) ilOffset = 0x3C
at Task.ExecuteWithThreadLocal(Task& currentTaskSlot) ilOffset = 0xC4
at Task.ExecuteEntry(Boolean bPreventDoubleExecution) ilOffset = 0x96
at ThreadPoolWorkQueue.Dispatch() ilOffset = 0xA2
>Crm Exception: Message: -1 is not a valid state code on new_partner., ErrorCode: -2147187704, InnerException: System.ArgumentException: -1 is not a valid state code on new_partner.
Parameter name: stateCode
[2014-03-18 04:13:32.562] Process: w3wp |Organization:d133c867-097c-e011-a247-02bf9d3bc4f8 |Thread: 62 |Category: Platform.Sdk |User: 7492ef42-9460-e311-940e-002dd80b0ca0 |Level: Error |ReqId: fdb76819-9781-4299-9e45-2b6f296f4fce | VersionedPluginProxyStepBase.Execute
ilOffset = 0x65
>Web Service Plug-in failed in SdkMessageProcessingStepId: {1FE67FC9-85A6-E011-AEE1-002DD802FEB1}; EntityName: new_partner; Stage: 30; MessageName: SetStateDynamicEntity; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel,
Version=6.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35; ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin; Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
at Microsoft.Crm.Extensibility.InternalOperationPlugin.Execute(IServiceProvider serviceProvider)
at Microsoft.Crm.Extensibility.V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context)
at Microsoft.Crm.Extensibility.VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context)
Inner Exception: Microsoft.Crm.CrmArgumentException: -1 is not a valid state code on new_partner.
at Microsoft.Crm.BusinessEntities.StatusCodeValidator.Validate(EntityMetadata entityMetadata, Int32 stateCode, Int32 statusCode)
at Microsoft.Crm.BusinessEntities.BusinessProcessObject.SetState(BusinessEntityMoniker moniker, Int32 newState, Int32 newStatusCode, BusinessEntity originalEntity, ExecutionContext context)
at Microsoft.Crm.BusinessEntities.BusinessProcessObject.SetState(BusinessEntityMoniker moniker, Int32 newState, Int32 newStatusCode, ExecutionContext context)
Inner Exception: System.ArgumentException: -1 is not a valid state code on new_partner.
Parameter name: stateCode
--- End of inner exception stack trace ---
at Microsoft.Crm.BusinessEntities.StatusCodeValidator.Validate(EntityMetadata entityMetadata, Int32 stateCode, Int32 statusCode)
at Microsoft.Crm.BusinessEntities.BusinessProcessObject.SetState(BusinessEntityMoniker moniker, Int32 newState, Int32 newStatusCode, BusinessEntity originalEntity, ExecutionContext context)
at Microsoft.Crm.BusinessEntities.BusinessProcessObject.SetState(BusinessEntityMoniker moniker, Int32 newState, Int32 newStatusCode, ExecutionContext context)
[2014-03-18 04:13:32.586] Process: w3wp |Organization:d133c867-097c-e011-a247-02bf9d3bc4f8 |Thread: 62 |Category: Platform |User: 7492ef42-9460-e311-940e-002dd80b0ca0 |Level: Error |ReqId: fdb76819-9781-4299-9e45-2b6f296f4fce | MessageProcessor.Execute
ilOffset = 0x1C5
>MessageProcessor fail to process message 'SetStateDynamicEntity' for 'new_partner'.
[2014-03-18 04:13:32.586] Process: w3wp |Organization:00000000-0000-0000-0000-000000000000 |Thread: 62 |Category: Platform |User: 00000000-0000-0000-0000-000000000000 |Level: Error |ReqId: fdb76819-9781-4299-9e45-2b6f296f4fce | ExceptionConverter.ConvertToFault
ilOffset = 0x69
>UNEXPECTED: no fault?
Thanks,
Arvind Singh
Regards, Arvind -
Performance issue while opening the report
HI,
I am working BO XI R3.1.there is performance issue while opening the report in BO Solris Server but on window server it is compratively fast.
we have few reports which contains 5 fixed prompt 7 optional prompt.
out of 5 fixed prompt 3 prompt is static (it contains 3 -4 record only )which is coming from materlied view.
we have already use many thing for improve performance in report like-
1) Index Awareness
2) Aggregate Awareness
3) Array fatch size-250
3) Aray bind time -32767
4) Login time out -600
the issue is that before refresh opening the report iteslf taking time 1.30 min on BO solris server but same report taking time in BO window server 45 sec. even we import on others BO solris server it is taking same time as per old solris server(1.30 min).
when we close the trace in solris server than it is taking 1.15 sec time.it should not be intial phase it is not hitting more on database.so why it is taking that much time while opening the report.
could you please guide us where exectly problem is there and how we can improve performance for opening the report.In case the problem related to solris server so what would be and how can we rectify.
Incase any further input require for the same feel free to ask me.Hi Kumar,
If this is happening with all the reports then this issue seems to be due to firewall or security settings of Solaris OS.
Please try to lower down the security level in solaris and test for the issue.
Regards,
Chaitanya Deshpande -
I'm facing performance issue while accessing the PLAF Table
Dar all,
I'm facing performance issue while accessing the PLAF Table.
The START-OF-SELECTION of the report starts with the following select query.
SELECT plnum pwwrk matnr gsmng psttr FROM plaf
INTO CORRESPONDING FIELDS OF TABLE it_tab
WHERE matnr IN s_matnr
AND pwwrk = p_pwwrk
AND psttr IN s_psttr
AND auffx = 'X'
AND paart = 'LA' .
While executing the report in the Quality system it does not face any performance issue...
When it comes to Production System the above said select query itself it is taking 15 - 20 minutes time to move further.
Kindly help me to over come this problem...
Regards,
JessiHi,
"Just implement its primary Key
WHERE PLNUM BETWEEN '0000000001' AND '9999999999' " By this you are implementing the Primary Key
This statement has nothing to do with performance, because system is not able to use primary key or uses every row.
Jessica, your query uses secondary index created by SAP:
1 (Material, plant) which uses fields MANDT MATNR and PLWRK.
but it is not suitable in your case.
You can consider adding new one, which would containt all fields: MANDT, MATNR, PWWRK, PSTTR AUFFX PAART
or - but it depends on number of rows meeting and not meeting (auffx = 'X' AND paart = 'LA' ) condition.
It could speed the performance, if you would create secondary index based on fields MANDT, MATNR, PWWRK, PSTTR
and do like Ramchander suggested: remove AUFFX and PAART from index and where section, and remove these unwanted rows
after the query using DELETE statement.
Regards,
Przemysław
Please check how many rows in production system -
hi friends...
i am posting fico document using bapi BAPI_ACC_GL_POSTING_POST.
after that i am updating the document number to my custom table.
but in some cases while updating the document in my custom table i am getting the fallowing dump..
in ST22
How to correct the error:
Database error text........: "[1205] Transaction (Process ID 66) was deadlocked
on lock resources with another process and has been chosen as the deadlock
victim. Rerun the transaction."
Internal call code.........: "[RSQL/UPDT/ZIF004_PKT ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"ZFI_01_MONTHLY_RESULT_FRM_PKT" or "ZFI_01_MONTHLY_RESULT_FRM_PKT"
"UPLOAD_SAP"
Source Code Extract
LOOP AT i_zif004_pkt_sum .
UPDATE zif004_pkt SET xblnr = i_zif004_pkt_sum-xblnr ---> i am getting DUMP here
gjahr = i_zif004_pkt_sum-gjahr
sap_flag_posting = i_zif004_pkt_sum-sap_flag_posting
WHERE compcode = i_zif004_pkt_sum-compcode
AND ccode = i_zif004_pkt_sum-ccode
AND wbselement = i_zif004_pkt_sum-wbselement
AND kostl = i_zif004_pkt_sum-kostl
AND code = i_zif004_pkt_sum-code
AND month1 = l_ltx
AND year1 = p_year.
IF sy-subrc = 0.
WRITE :/ 'Document ', i_zif004_pkt_sum-xblnr, 'is posted for ', i_zif004_pkt_sum-code.
ENDIF.
ENDLOOP.
kindly give some inputs..
regards
SelvaHi,
You will face this issue if your oracle data base is lack of work processes. try to check the work processes and increase them if possible with the helps basis guys.
check the below thread.
DI job failed ORA-12537: TNS:connection closed.
Regards,
Venkatesh -
Performance issues while accessing the Confirm/Goods Services' transaction
Hello
We are using SRM 4.0 , through Enterprise Portal 7.0.
Many of our users are crippled by Performance issues when accessing the Confirm/Goods Services tab( Transaction bbpcf02).
The system simply clocks and would never show the screen.
This problem occurs for some users all the time, and some users for some time.
It's not related to the User's machine as others are able to access it fast using the same machine.
It is also not dependent on the data size (i.e.no . of confirmations created by the user).
We would like to know why only some users are suffering more pronouncedly, and why is this transaction generally slower than all others.
Any directions for finding the Probable cause will be highly rewarded.
Thanks
KedarHi Kedar,
Please go through the following OSS Notes:
Note 610805 - Performance problems in goods receipt
Note 885409 - BBPCF02: The search for confirmation and roles is slow
Note 1258830 - BBPCF02: Display/Process confirmation response time is slow
Thanks,
Pradeep -
Performance issue while wrapping the sql in pl/sql block
Hi All,
I am facing performance issue in a query while wrapping the sql in pl/sql block.
I have a complex view. while quering the view using
Select * from v_csp_tabs(Name of View I am using), it is taking 10 second to fetch 50,000 records.
But when I am using some conditions on the view, Like
Select * from v_csp_tabs where clientid = 500006 and programid = 1 and vendorid = 1, it is taking more then 250 secs. to return the result set.
now the weird part is this is happening only for one programID, that is 1
I am using Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Any one please suggest what are the things i need to check..
I am sorry, I could not provide you the explain plan, because this is in production and I do not have enough prevelage.
Thank you in advance.
Thnx,
BitsBits wrote:
I have a complex view. while quering the view using
Select * from v_csp_tabs(Name of View I am using), it is taking 10 second to fetch 50,000 records.
But when I am using some conditions on the view, Like
Select * from v_csp_tabs where clientid = 500006 and programid = 1 and vendorid = 1, it is taking more then 250 secs. to return the result set.That's one problem with views - you never know how they will be used in the future, nor what performance implications variant uses can have.
>
now the weird part is this is happening only for one programID, that is 1
Any one please suggest what are the things i need to check..
I am sorry, I could not provide you the explain plan, because this is in production and I do not have enough prevelage.I understand what you are saying - I have worked at similar sites. HiddenName is correct in suggesting that you need to get execution plans but sometimes getting privileges from the DBA group is simply Not Going To Happen. Its wrong but that's the way it is. Follow through on HiddenName's suggested to get help from somebody who has the privleges needed
Post the query that view view is executing. Desk checking a query is NOT ideal but is one thing we can do.
I don't suppose you can see V$ views on production - V$SQL and V$SQL_PLAN (probably not if you can't generate plans, but its worth a thought) -
Performance issue while saving the sales order
Hi Guys,
I am facing some problem in creation of sales order with 100 line items while i tried to save, it is taking too much of time to save the order. I had taken the trace and found that method Call M." /SAPSLL/CL_CUHD=>GET_OBJECT_PK" is taken 43.9 % of Net value. can any body tell me that what is the purpose of this method..??
CAll : Call M. /SAPSLL/CL_CUHD=>GET_OBJECT_PK
Number : 6,321
Gross: 37,042,153
Net:37,042,153
gross(%) : 43.9%
NET(%):43.9%
Program called: /SAPSLL/CL_CUHD===============CP
<< Moderator message - Please do not promise rewards>>
Thanks in advance..
Mak.
Edited by: Rob Burbank on Jun 2, 2011 9:44 AMplease run the SE30 again, first switch on everything in measurement restrictions including internal tables.
Then measure 3 (!!) times. Do you always get the same time for the gross time? Or is there some variance?
The net time should be reduced because I would assume internal tables to need some or most of the time. If so then I would guess that you have a suboptimal internal table processing, quadartic coding. -
Issue while updating field SCHZU (shift Premium) in table view V_T508A
Hi All,
I am facing an issue while updating the field SCHZU(Shift premium) in Table view V_T508A.For some WSR entries when i am trying to update the shift premium say with a value 19400,the value is accepted.However for some other WSR entries,the value for shift premium gets modified to 19.400.Can someone please let me know why this error is occuring and how to rectify the same.
Regards,
Punam Jhausually its a percentage value. please check what value you enter
-
Error while updating the records through a DB link
Hi ,
I am getting the below error while updating around 15 thousands records, i suspect it to be timeout but not sure.Please can you let me know what solutions needs to be taken.
Not Found
The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
Not Found
The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at htmldb.oraclecorp.com Port 80
Object Type TABLE Object GWB_GRN_GRP_COUNTRIES_LU
Table Column Data Type Length Precision Scale Primary Key Nullable Default Comment
GWB_GRN_GRP_COUNTRIES_LU NAME Varchar2 720 - - - - - -
ALIAS Varchar2 720 - - - - - -
ACTIVE Varchar2 3 - - - - - -
REGION Varchar2 300 - - - - -
1 - 4
Thanks & Regards,
RamuHi Sangu,
See if the following notes help you:
Error when calling API from SQL*Developer, eg. ORA-01403 in API OE_ORDER_PUB.PROCESS_ORDER (Doc ID 1054295.1)
Cancellation Of Transfer Orders Is Not Possible - ORA-01403: no data found in Package OE_Order_PVT Procedure Process_Order (Doc ID 391307.1)
Thanks &
Best Regards, -
Error while updating HRA in infotype 581 for the employees.
Hi,
System is showing an error while updating HRA in infotype 581 for the employees.
The error is No Automatic updation for IT0008. Allowance Grouping not found.
What is this error. Please advice what to do in this case.Hi Deepthi,
Check Table V_T7INA5,V_T7INA1,V_T7INA3 and V_T7INA9 also.
Check it,
Regards,
Vinod.
Edited by: vinod rao on Jul 30, 2008 1:23 PM -
Issue while Creating the records in OAF by disabling one field.
Hi Experts,
I am having the scenario like this.
From the OAF page I want to create the record by omitting one field(it is disable for OAF).
Consider the folowing scenario..
I am having the following fields Empno,Empname,Salary,Job in the OAF page where I made the Job field alone as disable and the style i am using for job field is message text input and i have set the initial value as 'Manger'.
I am facing issue while creating the records in OAF page without the job filed value ie 'Manager' then the records were not inserted into my tables. Whereas if I enable the job field in OAF page(meaning I gave the job as 'Manager' in OAF page) I am able to create the records from OAF page and able get inserted in the database.
Could Anyone can suggest where I fail as it is my Priority issue.
Any Suggestion will be a great help for me.
Thanks,
Murugesh.or you can default it in the controller by handling add row event
if(vo.hasNext())
vorow = vo.next();
vorow.setAttribute("xxxx",3838);
--Prasanna -
Encountered error while updating the payment document
Hi Guys,
I encountered an error while updating the payment document of one of our bank account. See below error message:
Error: Unable to lock the record. Cause: The record is being modified by another user
thanks,
gracieHi Vikas,
Repeat the changes you are trying to make one step at a time and make sure you click on update in both the series screen and the document numbers screen every time.
I've faced this issue and doing this helped.
Regards,
Hamsa -
Issue while playing the content of Azure Media Services after deleting the channel.
Hi,
We are having the issue while playing the content of Azure Media Services after deleting the channel.
Please find detail scenarios below:
We have done live streaming of an event using Azure Media Services, event was around 5-6 hrs. After completion of event channel was deleted, when we checked content data
it was only 1hr. Content has only last 1 hr. recording, we are unable to get full recoding.
We divided event into two parts to avoid above issue. After completion of 1st part which was of 2 hrs., we stopped the streaming and deleted the channel. New channel was
created and streaming was started for 2<sup>nd</sup> part, after completion of event channel was deleted. Now we are unable to play the content data for 1st part but able to play the 2nd part of event through content publish URL.
We have done streaming of 3 hrs. event on 18th April with same process and full recoding was available.
Can you let me know what might be the issue?Hi,
Please refer to Justin’s blog and see if it helps:
http://www.justinkobel.com/post/2012/04/30/SharePoint-2010-Claims%E2%80%93Operation-is-not-valid-due-to-the-current-state-of-the-object.aspx
As suggested by Alex, please provide more information about your process of changing password.
Here is an article for updating passwords on SharePoint 2010:
http://blogs.technet.com/b/seanearp/archive/2011/01/25/updating-passwords-on-sharepoint-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support -
BDC to update CAT2 transaction.one issue while updating CAT2 transaction
Good Day Friends,
i have one issue while updating CAT2 transaction,
i have enhnced 3 custom fields in CAT2 tx-code. while updating through manually the data is getting stored in CATSDB tx-code for this i have done validation in enhamcement spots ECC 6.0.
but when i am running bdc this custom field data is not updating in CATSDB table.
my dout is will BDC work for enhancement spots or not , also please suggest if you have any idea ?Hi,
Usually I am trying to avoid BDC. So I would try to use BAPIs BAPI_CATIMESHEETMGR_INSERT and BAPI_CATIMESHEETMGR_CHANGE. Similar to other BAPIs, you can pass values for your extended fields using table EXTENSIONIN. It's described in BAPI's documentation or look for EXTENSIONIN on SDN. The principle is same for all BAPIs.
Regards
Maybe you are looking for
-
SharePoint 2013 RTM on Windows Server 2012 R2
Will SharePoint 2013 RTM trial which is available at following link, work on Windows Server 2012 R2? Or do I need SharePoint 2013 SP1 slipstream? http://www.microsoft.com/en-us/evalcenter/evaluate-sharepoint-server-2013
-
Empty double quotes/ speechmarks appearing in nickname field contacts
Hi, I've now got "" in the nickname field for every one of my contacts on my iPhone. This is particulaury annoying as it shows up directly below the name in the main box at the top for every contact. I believe it may be associated with Spanning Sync,
-
Why do I have two itunes libraries
After I updated Itunes, I now have two duplicate itunes libraries. How do I delete just one?
-
Search using categories from 2nd cat schema not working
Hi, We're currently using 2 categorization schemas in our transactions. However, the Category search criterion doesn't seem to work when we try to search for transactions using categories from the second categorization schema. The same search crite
-
Can not present customized item attribute.
I created new customized item attribute and new item type. On the items area, I chose to present the new customized item attribute. After submit a new item, I can see the new customized attribute under edit mode, however, I can not see it under view