Performance issue while using data type 'STRING'.

Hello All,
I have created a table for storing values of different features coming under a particular country. Since the last field 'Value field' have to hold text upto 800characters for some features, i have used the data type 'String' with character length specified as 1000. I am able to store values upto 1000characters using this. Also, the table has to hold lots and lots of value, and it will increase in future also.
Since i have mentioned the data type as 'String', I have one doubt whether this will affect the performance. Because length of most of the values in my value field is less than 75characters and in some case only it will exceed 700characters. So, my question is whether the 'String' data type will allocate the length which am specifying in the table for each entries, though the values entering is less than the specified length.
For example, if the value of my value field is 'Very High Complexity' which is of length 20characters, will the space allocation be reduced to 20 or will it be still 1000characters?
Hope someone can clarify my doubt.
Thanks In Advance,
Shino
Moved to appropriate forum
Edited by: Rob Burbank on Feb 23, 2009 4:27 PM

Hi Shino,
Well it is possible to store using STRING or LCHR in the transparent tables. There are some underlyning facts here:-
1. You can only have one such field per table
2. You cannot view them in the se11 / se16 table content browser
3. You will need to maintain an additional field for storing the length of the STRING or LCHR field.
Regarding the performance:
even though ABAP allows storing STRING or LCHR type fields in the transparent tables but as soon as the lenght of the field crosses 255 chars it is not advisable to store it directly in the transperant tables.
You should store that field in the knowledge repository and only a pointer to the knowledge repository in the transperant table field.
Anyways, Since you have only one field with such a requirement then i would suggest you use STRING instead of LCHR as in LCHR you will have to mandatorily assign a length (like 1000) so even if you are storing only 20 chars or 300 chars the system will reserve a slot of 1000 chars; this is not with string as in case of string everything would be dynamic.
The result being that the reading time increases in case of LCHR.
I Hop this answered your question.
Regards,
Sagar.

Similar Messages

Performance issues while query data from a table having large records

Hi all,
I have a performance issues on the queries on mtl_transaction_accounts table which has around 48,000,000 rows. One of the query is as below
SQL ID: 98pqcjwuhf0y6 Plan Hash: 3227911261
SELECT SUM (B.BASE_TRANSACTION_VALUE)
FROM
MTL_TRANSACTION_ACCOUNTS B , MTL_PARAMETERS A
WHERE A.ORGANIZATION_ID =    B.ORGANIZATION_ID
AND A.ORGANIZATION_ID = :b1
AND B.REFERENCE_ACCOUNT =    A.MATERIAL_ACCOUNT
AND B.TRANSACTION_DATE <= LAST_DAY (TO_DATE (:b2 ,   'MON-YY' ) )
AND B.ACCOUNTING_LINE_TYPE != 15
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      3      0.02       0.05          0          0          0           0
Fetch        3    134.74     722.82     847951    1003824          0           2
total        7    134.76     722.87     847951    1003824          0           2
Misses in library cache during parse: 1
Misses in library cache during execute: 2
Optimizer mode: ALL_ROWS
Parsing user id: 193 (APPS)
Number of plan statistics captured: 1
Rows (1st) Rows (avg) Rows (max) Row Source Operation
         1          1          1 SORT AGGREGATE (cr=469496 pr=397503 pw=0 time=237575841 us)
    788242     788242     788242   NESTED LOOPS (cr=469496 pr=397503 pw=0 time=337519154 us cost=644 size=5920 card=160)
         1          1          1    TABLE ACCESS BY INDEX ROWID MTL_PARAMETERS (cr=2 pr=0 pw=0 time=59 us cost=1 size=10 card=1)
         1          1          1     INDEX UNIQUE SCAN MTL_PARAMETERS_U1 (cr=1 pr=0 pw=0 time=40 us cost=0 size=0 card=1)(object id 181399)
    788242     788242     788242    TABLE ACCESS BY INDEX ROWID MTL_TRANSACTION_ACCOUNTS (cr=469494 pr=397503 pw=0 time=336447304 us cost=643 size=4320 card=160)
   8704356    8704356    8704356     INDEX RANGE SCAN MTL_TRANSACTION_ACCOUNTS_N3 (cr=28826 pr=28826 pw=0 time=27109752 us cost=28 size=0 card=7316)(object id 181802)
Rows     Execution Plan
      0 SELECT STATEMENT   MODE: ALL_ROWS
      1   SORT (AGGREGATE)
788242    NESTED LOOPS
      1     TABLE ACCESS   MODE: ANALYZED (BY INDEX ROWID) OF
                'MTL_PARAMETERS' (TABLE)
      1      INDEX   MODE: ANALYZED (UNIQUE SCAN) OF
                 'MTL_PARAMETERS_U1' (INDEX (UNIQUE))
788242     TABLE ACCESS   MODE: ANALYZED (BY INDEX ROWID) OF
                'MTL_TRANSACTION_ACCOUNTS' (TABLE)
8704356      INDEX   MODE: ANALYZED (RANGE SCAN) OF
                 'MTL_TRANSACTION_ACCOUNTS_N3' (INDEX)
Elapsed times include waiting on following events:
Event waited on                             Times   Max. Wait Total Waited
----------------------------------------   Waited ---------- ------------
row cache lock                                 29        0.00          0.02
SQL*Net message to client                       2        0.00          0.00
db file sequential read                    847951        0.40        581.90
latch: object queue header operation            3        0.00          0.00
latch: gc element                              14        0.00          0.00
gc cr grant 2-way                               3        0.00          0.00
latch: gcs resource hash                        1        0.00          0.00
SQL*Net message from client                     2        0.00          0.00
gc current block 3-way                          1        0.00          0.00
********************************************************************************On a 5 node rac environment the program completes in 15 hours whereas on a single node environemnt the program completes in 2 hours.
Is there any way I can improve the performance of this query?
Regards
Edited by: mhosur on Dec 10, 2012 2:41 AM
Edited by: mhosur on Dec 10, 2012 2:59 AM
Edited by: mhosur on Dec 11, 2012 10:32 PM

CREATE INDEX mtl_transaction_accounts_n0
ON mtl_transaction_accounts (
                               transaction_date
                             , organization_id
                             , reference_account
                             , accounting_line_type
/:p

Performance issue while transferring data from one itab to another itab

hi experts,
i have stored all the general material details in one internal table and description, valuation details of the meterial is stored in another internal table which is of standard table. now i need to tranfer all the data from these two internal tables into one final internal table but it is taking lot of time as it has to transfer lacs of data.
i have declared the output table as shown below
DATA:
t_output TYPE standard TABLE
           OF type_output
           INITIAL SIZE 0
           WITH HEADER LINE.
(according to the standard i have to declare like this and the two internal tables are declared similar to the above one)
could somebody suggest me how shall I procced through this...
thanks in advance....
ragerds,
Deepu

Have a look at the following article which you may find useful:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40729734-3668-2910-deba-fa0e95e2c541">Improving performance in nested loops</a>
good luck, damian

Performance issue while extracting data from non-APPS schema tables.

Hi,
I have developed an ODBC application to extract data from Oracle E-Business Suite 12 tables.
e.g. I am trying to extract data from HZ_IMP_PARTIES_INT table of Receivables application(Table is in "AR" database schema) using this ODBC application.
The performance of extraction (i.e. number of rows extracted per second) is very low if the table belongs to non-APPS schema. (e.g. HZ_IMP_PARTIES_INT belongs to "AR" database schema)
Now if I create same table (HZ_IMP_PARTIES_INT) with same data in "APPS" schema, the performance of extraction improves a lot. (i.e. the number of rows extracted per second increases a lot) with the same ODBC application.
The "APPS" user is used to connect to the database in both scenarios.
Also note that my ODBC application creates multiple threads and each thread creates its own connection to the database. Each thread extract different data using SQL filter condition.
So, my question is:
Is APPS schema optimized for any data extraction?
I will really appreciate any pointer on this.
Thanks,
Rohit.

Hi,
Is APPS schema optimized for any data extraction? I would say NO as data extraction performance should be the same for all schemas. Do you run "Gather Schema Statistics" concurrent program for ALL schemas on regular basis?
Regards,
Hussein

Performance issue while inserting data

I have a .dat file containing the required data for the table.It has almost half a million rows.When i inserted the data using SQL LOADER it took
almost whopping 70 minutes .How can i insert the data fast.what should i include in my control file to insert data fast.
Or any other method?2
oracle - 11gR2
Cant use external tables as data is not of fixed length
Edited by: Rahul_India on Oct 6, 2012 1:56 AM

True but irrelevant.
If the reason for the 70 minute load is CPU starvation the load time will remain 70 minutes.
If the reason for the 70 minute load time is that a DBA implemented workload management the load time will remain 70 minutes.
If the reason for the 70 minute load time is network saturation the load time will remain 70 minutes.
If the reason for the 70 minute load time is the SAN bus is saturated the load time will remain 70 minutes.
If the OP is on a RAC cluster and loading is happening on the wrong node causing remastering the load time will remain 70 minutes.
and I could add many dozens more to this list without breaking a sweat.
None of us have any basis for making any recommendation and again my intent here is not to be rude but sending the OP off on a wild goose chase saying DIRECT LOAD is faster, of course it is, or External Tables are faster, or whatever has no value if you do not first stop and ask the single most important question which is: "Why is the load taking 70 minutes?" Which is a question none of us can answer.
What I am encouraging you to do is stop giving advice when you don't have a single byte of relevant information upon which to base a recommendation.
Are you serious suggesting parallel execution? I do have experience with it. If CPU starvation is the root cause I recommend you try to work through the impact of your suggestion ... you will bring the server to its knees begging for mercy. So again please stop making recommendations until the OP responds with facts.

Performance issue while generating Query

Hi BI Gurus.
I am facing performance issue while generating query on 0IC_C03.
It has a variable as (from & to) for generating the report for a particular time duration.
if the variable (from & to) fields is filled then after taking a long time it shows run time error.
& if the query is executed without mentioning the variable(which is optional) then the data is extracted from beginning to till date. the same takes less time in execution.
& after that the period has to be selected manually by option keep filter value. please suggest how can i solve the error
Regards
Ritika

HI RITIKA,
WEL COME TO SDN.
YOUHAVE TO CHECK THE FOLLOWING RUN TIME SEGMENTS USING ST03N TCODE:
High Database Runtime
High OLAP Runtime
High Frontend Runtime
if its high Database Runtime :
- check the aggregates or create aggregates on cube and this helps you.
if its High OLAP Runtime :
- check the user exits if any.
- check the hier. are used and fetching in deep level.
If its high frontend runtime:
- check if a very high number of cells and formattings are transferred to the Frontend ( use "All data" to get value "No. of Cells") which cause high network and frontend (processing) runtime.
For From and to date variables, create one more set and use it and try.
Regs,
VACHAN

Issue While sending data to Webserver

Hi All,
I am facing an issue while sending data to a webserver. My scenario is SAP(Proxy) to XI to Webserver. It is an asynchronous scenario. The same communication channel and same WSDL is used to send many Interfaces but when I am sending data for a particular Interface I am facing the issue "SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request"
Few points for reference -
1. I am sending valid data to the webserver(Confirmed by the webserver guy).
2. The WSDL is the latest one and the same WSDL is used at their end to receive the data.
3. The schema I am using to send the data is also the latest ones.
4. The same payload when sent through SOAPUI tool reaches the web server.
5. The same communcation channel is used to send data for all the messages. All other messages are reaching the webserver except this message.
Can anyone please provide me some solution for this issue.
Thanks in advance.
Regards,
Sarat

SInce you are using only one receiver channel for all WSDL operations, I hope you are setting SOAP action for each message type (operation) using dynamic configuration during mapping or at module level(in the soap receiver channel using DC bean).
>> 5. The same communcation channel is used to send data for all the messages. All other messages are reaching the webserver except this message.
Cross verify again all the design and configurations. check the MONI for Dynamic configuration header for this particular message if you are setting the same during mapping.
>> 4. The same payload when sent through SOAPUI tool reaches the web server.
Finally you can use some Sniffer tools to verify the requests that are being sent from XI and you can compare with SOAP UI tool request which is sending correct request in your case.

Data type STRING

Hi all,
i have creted a ztable and in that for one field the length is to be more than 300 chars.
so i am using the data type directly as STRING. i tried to check the table but i am getting warning as 'data type string not allowed in DB tables'.
plz help what to do.
regards,
siri.

Hi,
    Here is the sample code to store the xml file into ABAP DB table.
First create a table called YTEST_BIN with following fileds.
Filed Nmae      Data Elemen     type
MANDT             MANDT              CLNT
DESCRIPTION     HTTPBODY     RAWSTRING
Now create a program to read the XML file from your desktop and load it into the table.
Below given is the code for loading the table.
REPORT y_store_xml.
DATA: wf_filetab TYPE filetable .
DATA: wf_filerc TYPE i ,
      wf_filename TYPE string ,
      wf_path TYPE string ,
      wf_full_path TYPE string ,
      wf_file_length TYPE i .
DATA: wf_extension TYPE string ,
      wf_fname TYPE string .
DATA: BEGIN OF int_tab1 OCCURS 0,
        int_txt(1000) TYPE x ,
      END OF int_tab1.
DATA: upd_tab TYPE STANDARD TABLE OF ytest_bin .
DATA: wa_upd_tab LIKE LINE OF upd_tab .
DATA: temp_xstring TYPE xstring .
PARAMETERS: p_file LIKE file_table-filename LOWER CASE VISIBLE LENGTH 80 .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file .
PERFORM browse_file CHANGING p_file .
AT SELECTION-SCREEN ON p_file .
IF p_file IS INITIAL .
    MESSAGE e398(00) WITH
       'Enter Filename and path' .
ENDIF.
START-OF-SELECTION .
CLEAR wf_filename .
MOVE: p_file TO wf_filename .
PERFORM load_file USING wf_filename .
PERFORM save_file_contents .
*&      Form browse_file
      text
     <--P_P_FILE text
FORM browse_file CHANGING p_p_file.
CLEAR wf_filename .
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title            = 'Select the File'
   DEFAULT_EXTENSION       = cl_gui_frontend_services=>FILETYPE_TEXT
   DEFAULT_FILENAME        =
    FILE_FILTER             = cl_gui_frontend_services=>FILETYPE_EXCEL
   INITIAL_DIRECTORY       =
   MULTISELECTION          =
    CHANGING
      file_table              = wf_filetab
      rc                      = wf_filerc
   USER_ACTION             =
    EXCEPTIONS
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      not_supported_by_gui    = 4
      OTHERS                  = 5
IF sy-subrc <> 0.
    MESSAGE e398(00) WITH 'Error Opening File' .
ELSE .
    READ TABLE wf_filetab INDEX 1 INTO p_file .
ENDIF.
ENDFORM.                    " browse_file
*&      Form load_file
      text
     -->P_WF_FILENAME text
FORM load_file USING    p_wf_filename.
CLEAR int_tab1 .
REFRESH int_tab1 .
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                      = p_wf_filename
      filetype                      = 'BIN'
IMPORTING
   filelength                    = wf_file_length
HEADER                        =
    TABLES
      data_tab                      = int_tab1
   EXCEPTIONS
     file_open_error               = 1
     file_read_error               = 2
     no_batch                      = 3
     gui_refuse_filetransfer       = 4
     invalid_type                  = 5
     no_authority                  = 6
     unknown_error                 = 7
     bad_data_format               = 8
     header_not_allowed            = 9
     separator_not_allowed         = 10
     header_too_long               = 11
     unknown_dp_error              = 12
     access_denied                 = 13
     dp_out_of_memory              = 14
     disk_full                     = 15
     dp_timeout                    = 16
     OTHERS                        = 17
IF sy-subrc <> 0.
    MESSAGE e398(00) WITH 'File may be open - Error loading' .
ENDIF.
ENDFORM.                    " load_file
*&      Form save_file_contents
      text
--> p1        text
<-- p2        text
FORM save_file_contents .
CLEAR :wa_upd_tab , temp_xstring .
LOOP AT int_tab1 .
    CONCATENATE temp_xstring int_tab1-int_txt INTO temp_xstring IN BYTE MODE.
ENDLOOP .
IF NOT temp_xstring IS INITIAL .
optional
    TRY.
        CALL METHOD cl_abap_gzip=>compress_binary
          EXPORTING
            raw_in   = temp_xstring
          IMPORTING
            gzip_out = wa_upd_tab-description.
      CATCH cx_parameter_invalid_range .
      CATCH cx_sy_buffer_overflow .
      CATCH cx_sy_compression_error .
    ENDTRY.
    APPEND wa_upd_tab TO upd_tab .
ENDIF .
IF NOT upd_tab IS INITIAL .
    MODIFY ytest_bin FROM TABLE upd_tab .
    IF sy-subrc EQ 0 .
      MESSAGE i398(00) WITH wf_filename ` Saved!`.
    ENDIF .
ENDIF.
ENDFORM.                    " save_file_contents
<b>Reward points</b>
Regards

Performance issue while opening the report

HI,
I am working BO XI R3.1.there is performance issue while opening the report in BO Solris Server but on window server it is compratively fast.
we have few reports which contains 5 fixed prompt 7 optional prompt.
out of 5 fixed prompt 3 prompt is static (it contains 3 -4 record only )which is coming from materlied view.
we have already use many thing for improve performance in report like-
1) Index Awareness
2) Aggregate Awareness
3) Array fatch size-250
3) Aray bind time -32767
4) Login time out -600
the issue is that before refresh opening the report iteslf taking time 1.30 min on BO solris server but same report taking time in BO window server 45 sec. even we import on others BO solris server it is taking same time as per old solris server(1.30 min).
when we close the trace in solris server than it is taking 1.15 sec time.it should not be intial phase it is not hitting more on database.so why it is taking that much time while opening the report.
could you please guide us where exectly problem is there and how we can improve performance for opening the report.In case the problem related to solris server so what would be and how can we rectify.
Incase any further input require for the same feel free to ask me.

Hi Kumar,
If this is happening with all the reports then this issue seems to be due to firewall or security settings of Solaris OS.
Please try to lower down the security level in solaris and test for the issue.
Regards,
Chaitanya Deshpande

Create data type string

HI
There is a way to create date type string using the command
Create data type "string"...
I know that I can create data type C but string dont have any restrication so how I can hanlde it ?
Regards
Joy

Hi,
You can use the create data statement:
DATA: lo_data TYPE REF TO data.
FIELD-SYMBOLS: <str> TYPE ANY.
CREATE DATA lo_data TYPE string.
ASSIGN lo_data->* TO <str>.
Here <str> will be of type string.
Kr,
m.

Special character issue while loading data from SAP HR through VDS

Hello,
We have a special character issue, while loading data from SAP HR to IdM, using a VDS and following the standard documentation: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09fa547-f7c9-2b10-3d9e-da93fd15dca1?quicklink=index&overridelayout=true
French accent like (é,à,è,ù), are correctly loaded but Turkish special ones (like : Ş, İ, ł ) are transformed into u201C#u201D in Idm.
The question is : does someone know any special setting to do in the VDS or in IdM for special characters to solve this issue??
Our SAP HR version is ECC6.0 (ABA/BASIS7.0 SP21, SAP_HR6.0 SP54) and we are using a VDS 7.1 SP5 and SAP NW IdM 7.1 SP5 Patch1 on oracle 10.2.
Thanks

We are importing directly to the HR staging area, using the transactions/programs "HRLDAP_MAP", "LDAP" and "/RPLDAP_EXTRACT", then we have a job which extract data from the staging area to a CSV file.
So before the import, the character appears correctly in SAP HR, but by the time it comes through the VDS to the IDM's temporary table, it becomes "#".
Yes, our data is coming from a Unicode system.
So, could it be a java parameter to change / add in the VDS??
Regards.

Unable to support application while using data services

I have a curve9220
all time good product
but unable to use any application while using data services
but i can browes from explore.

Yes, if you want to use them on mobile network you must have a BB data plan.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

I'm facing performance issue while accessing the PLAF Table

Dar all,
I'm facing performance issue while accessing the PLAF Table.
The START-OF-SELECTION of the report starts with the following select query.
    SELECT plnum pwwrk matnr gsmng psttr FROM plaf
    INTO CORRESPONDING FIELDS OF TABLE it_tab
    WHERE matnr IN s_matnr
      AND pwwrk = p_pwwrk
      AND psttr IN s_psttr
      AND auffx = 'X'
      AND paart = 'LA' .
While executing the report in the Quality system it does not face any performance issue...
When it comes to Production System the above said select query itself it is taking 15 - 20 minutes time to move further.
Kindly help me to over come this problem...
Regards,
Jessi

Hi,
"Just implement its primary Key
WHERE PLNUM BETWEEN '0000000001' AND '9999999999' " By this you are implementing the Primary Key
This statement has nothing to do with performance, because system is not able to use primary key or uses every row.
Jessica, your query uses secondary index created by SAP:
1     (Material, plant) which uses fields MANDT MATNR and PLWRK.
but it is not suitable in your case.
You can consider adding new one, which would containt all fields: MANDT, MATNR, PWWRK, PSTTR AUFFX PAART
or - but it depends on number of rows meeting and not meeting (auffx = 'X' AND paart = 'LA' ) condition.
It could speed the performance, if you would create secondary index based on fields MANDT, MATNR, PWWRK, PSTTR
and do like Ramchander suggested: remove AUFFX and PAART from index and where section, and remove these unwanted rows
after the query using DELETE statement.
Regards,
Przemysław
Please check how many rows in production system

Issue with field data type NUMBER(22,5) while updating field data.

Hi,
I have a field with data type NUMBER(22,5).
While inserting or updating field data it should take 17 digit and after decimal point 5 digit total 22 digit.
I set 22 for maximumLength property of messageTextInput field.
While updating field I am getting following problems,
1) I provide the value as 1234567890123456789012 (22 digit) and click apply button.
then I got error message as
Error
मैकेनाइजड दो पहिया/तीन पहिया वाहन - Value 1234567890123460000000 exceeds the maximum allowed value (NUMERIC (22, 5))
2)then I insert 12345678901234567.1234 (17 digit before decimal point and 4 digit after decimal point and it didn't accept 5 digit after decimal point) and click apply button.
It insert the value as 12345678901234600 (value changed after Apply)
The I tried with simple SQL insert statement to insert data and it successfully insert 12345678901234567.12345 value.
Any item property I missed here to set?
Please suggest.
Thanks & Regards,
Sagarika

hi
according to
" then I insert 12345678901234567.1234 (17 digit before decimal point and 4 digit after decimal point and it didn't accept 5 digit after decimal point) and click apply button.
It insert the value as 12345678901234600 (value changed after Apply)"
this statement ,it seems that it is definitely applying round or somthing like that function in the code before inserting value in the table("try with select round(12345678901234567.1234 ) from dual u will get the same result = 123456789012345600 ") ,
bcz u r able to insert the same directely into the table using insert statement so kindely have look on the code if something like this is not happening there.try to check code in related EOimpl class
try to to use debugging mode ,and the 23 char problem is related to maximum lenghth of text box make it 23 it will get resolved and u will be able to enter 17 digits with 5 digits after decimal point
thanx pratap

Facing Issue while Extracting Data from Essbase using CalcScript

Hi All,
we are getting this error while extracting data from Essbase by CalcScript using ODI.
Does anyone have the answer
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 1, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx5046.f$0(<string>:1)
     at org.python.pycode._pyx5046.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.hyperion.odi.essbase.wrapper.EssbaseCalcDataIterator.init(Unknown Source)
     ... 33 more
Caused by: com.essbase.api.base.EssException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainCalcFile(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainCalcFile(Unknown Source)
     at com.essbase.api.datasource.EssCube.calculate(Unknown Source)
     at com.hyperion.odi.essbase.wrapper.EssbaseApplication.executeCalculationScript(Unknown Source)
     ... 34 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)

Hi Now i am getting this error.
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 1, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx5054.f$0(<string>:1)
     at org.python.pycode._pyx5054.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.hyperion.odi.essbase.wrapper.EssbaseCalcDataIterator.init(Unknown Source)
     ... 33 more
Caused by: com.essbase.api.base.EssException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainCalcFile(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainCalcFile(Unknown Source)
     at com.essbase.api.datasource.EssCube.calculate(Unknown Source)
     at com.hyperion.odi.essbase.wrapper.EssbaseApplication.executeCalculationScript(Unknown Source)
     ... 34 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.h.A(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)

Performance issue while using data type 'STRING'.

Similar Messages

Maybe you are looking for