Issue While sending data to Webserver

Hi All,
I am facing an issue while sending data to a webserver. My scenario is SAP(Proxy) to XI to Webserver. It is an asynchronous scenario. The same communication channel and same WSDL is used to send many Interfaces but when I am sending data for a particular Interface I am facing the issue "SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request"
Few points for reference -
1. I am sending valid data to the webserver(Confirmed by the webserver guy).
2. The WSDL is the latest one and the same WSDL is used at their end to receive the data.
3. The schema I am using to send the data is also the latest ones.
4. The same payload when sent through SOAPUI tool reaches the web server.
5. The same communcation channel is used to send data for all the messages. All other messages are reaching the webserver except this message.
Can anyone please provide me some solution for this issue.
Thanks in advance.
Regards,
Sarat

SInce you are using only one receiver channel for all WSDL operations, I hope you are setting SOAP action for each message type (operation) using dynamic configuration during mapping or at module level(in the soap receiver channel using DC bean).
>> 5. The same communcation channel is used to send data for all the messages. All other messages are reaching the webserver except this message.
Cross verify again all the design and configurations. check the MONI for Dynamic configuration header for this particular message if you are setting the same during mapping.
>> 4. The same payload when sent through SOAPUI tool reaches the web server.
Finally you can use some Sniffer tools to verify the requests that are being sent from XI and you can compare with SOAP UI tool request which is sending correct request in your case.

Similar Messages

Deadlock issue while sending data from PI to JDBC !!!

Hi All,
We are getting below error while sending data from PI to JDBC (Database).
Error - JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'store_order_details' (structure 'Order_details_Statement'): com.microsoft.sqlserver.jdbc.SQLServerException: Transaction (Process ID 61) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
This is happening when more than one PI message is trying to deliver data at the same time to database.
Can anyone let us know the root cause of this issue and how we can rectify this.
Is there some setting which we can use to do parallel processing as Delivering one message at a time to database is causing performance issues & taking lot of time.
Thanks
Neha Verma

Hello Neha,
Strange but can please get below information.
Please check with the DB admin about if the user is getting locked or is there any hanging threads related to user.
Also confirm with DB admin if the exclusive lock is on table or on the row when you try insertign or updating information.
You can share the user from the receiver channel.
Regards,
Hiren A.

Error while sending data from XI to BI System

Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
Narendra

Hi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

IDOC FAILURE while sending data from ZEB_HCm systen to ZRA-EREC SYS

Hi
Experts
I am having idoc failure while sending data from HCM SYSTEM to EREC systems.
From that Data records i found the failure recored containing PERNR.
and from status record the
ERROE IS : No status information available for object CANDIDATE
Message no. HRRCF0001073
usually i used to run PFAL for these king of issues , when i tried to run PFAL for the PERNR it is giving the same errroe,
So pls suggest how to send the data to resiolve this .
Regards
Suresh

Hi Nitin,
The IDOC when came in Erec system is in error status ( 51).
When i saw the data records, only pernr were mentioned.
Then i send the idoc thru PFAL again by sending all information as O-C-S-P.
Still it is giving me the same error.

Proc_getObject with nolock causes "read operation on a large object failed while sending data to the client"

SharePoint 2013 code for the SharePoint Config database stored procedure dbo.proc_getObject has been changed from SharePoint 2010 with the difference of select with nolock.
I am seeing numerous Error 7886, Severity-20 errors nightly:
"A read operation on a large object failed while sending data to the client. A common cause for this is if the application is running in READ UNCOMMITTED isolation level. This connection will be terminated."
Here I have commented out "with (nolock)" to 'fix' the error and to align the store proc with SharePoint 2010 code :
ALTER PROCEDURE [dbo].[proc_getObject]
@Id uniqueidentifier,
@RequestGuid uniqueidentifier = NULL OUTPUT
AS
SET NOCOUNT ON
SELECT
Id,
ParentId,
ClassId,
Name,
Status,
Version,
Properties
FROM
Objects --with (nolock)
WHERE
Id = @Id
RETURN 0
How is this stored procedure called and for what use?
Why did Microsoft make this change to SharePoint 2013 - some performance gain through dirty reads at the cost of stability? Or what could be a reason for this to happen that can be fixed?

GetObject retrieves any farm object that is selected (by ID). Changing this is obviously not supported, and NoLock was used to (help) prevent locks when performing a select query.
I've never seen this issue, and would guess it is unique to your environment given this is such a core piece of the SharePoint infrastructure.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

403 forbidden error received at Trade Partner side while sending data to XI

Hi XI Experts,
We have a B2B scenario from TP1 to another TP2 via XI in our production system. The interface is working fine and messages are flowing successfully. However, the Trade Partner HUB has decided to implement a new eCommerce Business Platform at their end. That's why they have provided AS2 ID of sender and Receiver to us to make the changes in Quality environment. I have done the same in our Quality system.
Flow: We are able to send the data successfully to the AS2 ID provided by Hubgroup. Where as we are not able to receive any data from HUB.
Last Friday, Hubgroup has received the error while sending data to XI. And in our Sender AS2 channel, we also received the following error.
a) HUB Side error:
                          Here is a copy of the MDN Message send to HUB:
                         The message you sent on "Thu, 14 Oct 2010 07:14:51 GMT" from "XXXXXXXX" to
                        "XXXXXXXXX" with subject "Integrator Message" has been received on 14 Oct
                         2010 19:14:52 GMT, but cannot be processed because message authentication
                         failed.
b) XI AS2 channel error:
                         Error type: PANIC >> Error date: 10/14/10 11:48 AM >> Description: Initiate
                         Error:com.seeburger.util.configuration.ConfigurationException: Failed to lookup report channel for failed inbound
                         message. Reason : com.seeburger.xi.config.ConfigException: No matching inbound binding (report) found for
                         FromParty: ToParty: subject:Integrator Message [10/14/10 11:48 AM]
                  I have done the following things: 1) Cache refreshed 2) Recreated the 1st part from HUB to XI. 3) Checked the Agreements and Receiver Determination and also the AS2 ID's 4) Also checked the URL in communication channel. I have created the scenario with out any mapping. I want to receive the data from HUBGROUP with out any changes. For that, I will be using a dummy interface and dummy namespace in configuration.
When we test last night, HUB side they have received 403 forbidden error message and we didn;t receive any message to XI.
Note: XI3.0 version we are using currently. We are upgrading to PI 7.11 in the next month.
Please help me on this.
Thanks & Regards,
Abdullah Shaik.
Edited by: Abdullah Shaik on Oct 20, 2010 9:06 AM

Hi Abdullah ,
here are a few things that you can check:
1) Message authentication failed
- Check the authentication certificate settings.
- Disable the u201Cauthentication requiredu201D flag, if messages without authentication are to be received.
2) Partner received HTTP Error 403 u201Cforbiddenu201D.
This error may have different reasons:
a) You or your partner has entered an incorrect AS2 ID for one of the involved parties.
b) A valid sender agreement is missing.
c) There are more then one AS2 sender agreements with the same sender AND receiver party.
d) The corresponding inbound channel is set to inactive.
regards,
Daniel

"...an error occurred while sending data from the iPhone" - caused by latest iPhone update today?

I've been syncing my iPhone to my (non-apple) desktop for several months without difficulty.
Today I accepted the latest upgrade to my iPhone software.
Since it installed, it will not sync.
It gives the error message "iTunes could not sync calendars to the iPhone "Steve's iPhone" because an error occurred while sending data from the iPhone." After rebooting the desktop, the error repeats, and it's now in hour 2 of the continuing message "Syncing Steve's iPhone (Step 2 of 2) - Finishing sync"
Has anyone else run into this Undocumented Feature of the latest upgrade?
As bugs go, this is pretty serious for those of us who depend on syncing the iPhone and desktop for our business!
Thanks to anyone who can help!
Steve Callender

Tried rebooting the phone, and now it works.
Guess there's 2 lessons here -
Boot again when installing new SW, even if the phone reboots itself during installation, and
Boot to see if that fixes a problem before posting it.
Steve

Sup Error While Sending Date Parameter to SUP server?

Hi Every one,
   I am developing an iOS app using Sybase Unwired Platform 2.1.3 I am getting error While sending Date parameter to Database. How to send DATE format to the sales_order table for order_date column from iOS.
I tried like this..
@try {
        SUP105Sales_order *insertRow =[[SUP105Sales_order alloc]init];
        int32_t idValue =2671;
        int32_t custID =103;
        int32_t sales =506;
        insertRow.id_=idValue;
        insertRow.cust_id=custID;
        insertRow.order_date=[NSDate date];
        insertRow.fin_code_id=@"r1";
        insertRow.region=@"Hyd";
        insertRow.sales_rep=sales;
        [insertRow save];
        [insertRow submitPending];
        [SUP105SUP105DB synchronize];
    @catch (NSException *exception) {
        NSLog(@"Exception---%@",exception.description);
In server log:
2014-02-28 16:39:41.833 WARN Other Thread-182 [SUP105.server.SUP105DB]{"_op":"C","level":5,"code":412,"eisCode":"257","message":"com.sybase.jdbc3.jdbc.SybSQLException:SQL Anywhere Error -157: Cannot convert '' to a timestamp","component":"Sales_order","entityKey":"3210004","operation":"create","requestId":"3210005","timestamp":"2014-02-28 11:09:41.646","messageId":0,"_rc":0}
I strongly believe the above error for because of Date format..i have tried different ways to send Date to Sup server ..but i didn't get any solution.. Can any one help me me how to send date to database in SUP in iOS??
Message was edited by: Michael Appleby

Hi Jitendra,
Thanks for your Quick reply..Any way i have tried what you said,but i didn't get any solution.
Here is my Code:
    NSDateFormatter *formatter = [[[NSDateFormatter alloc] init] autorelease];
    [formatter setDateFormat:@"dd-MM-YYYY HH:mm:ss"];
    NSDate *tempDate =(NSDate *) [formatter stringFromDate:[NSDate date]];
    NSLog(@"%@",tempDate);
@try {
        SUP105Sales_order *insertRow =[[SUP105Sales_order alloc]init];
        int32_t idValue =2671;
        int32_t custID =103;
        int32_t sales =506;
        insertRow.id_=idValue;
        insertRow.cust_id=custID;
        insertRow.order_date =tempDate;
        insertRow.fin_code_id=@"r1";
        insertRow.region=@"Hyd";
        insertRow.sales_rep=sales;
        [insertRow save];
        [insertRow submitPending];
        [SUP105SUP105DB synchronize];
    @catch (NSException *exception) {
        NSLog(@"Exception---%@",exception.description);
Error is :
Exception---SUPPersistenceException: exception is in createCore: unexpected null value for 'order_date'

How to rollback a traansacation if we got any problem while sending data to

how to rollback a traansacation if we got any problem while sending data to a webservice...

Is it SOA or OSB? Which version you are in..

Special character issue while loading data from SAP HR through VDS

Hello,
We have a special character issue, while loading data from SAP HR to IdM, using a VDS and following the standard documentation: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09fa547-f7c9-2b10-3d9e-da93fd15dca1?quicklink=index&overridelayout=true
French accent like (é,à,è,ù), are correctly loaded but Turkish special ones (like : Ş, İ, ł ) are transformed into u201C#u201D in Idm.
The question is : does someone know any special setting to do in the VDS or in IdM for special characters to solve this issue??
Our SAP HR version is ECC6.0 (ABA/BASIS7.0 SP21, SAP_HR6.0 SP54) and we are using a VDS 7.1 SP5 and SAP NW IdM 7.1 SP5 Patch1 on oracle 10.2.
Thanks

We are importing directly to the HR staging area, using the transactions/programs "HRLDAP_MAP", "LDAP" and "/RPLDAP_EXTRACT", then we have a job which extract data from the staging area to a CSV file.
So before the import, the character appears correctly in SAP HR, but by the time it comes through the VDS to the IDM's temporary table, it becomes "#".
Yes, our data is coming from a Unicode system.
So, could it be a java parameter to change / add in the VDS??
Regards.

Issue while saving data in excel

My client on SAP BPC 10 NW.
We got a issue while saving the data in EXCEL.
Though the users are saving single record in excel it popping up to user as, he/she is trying to save 4 records and then user clicks on yes button all it is giving is wrong results.
All the script logics and badi's will get trigger only after hitting on the save and yes buttons. so i suspect that something wrong with excel or EPM add in.
You have any suggestions here?

I am trying to enter 9 records in 2014.DEC, 2015.JAN, 2015.FEB
I am getting pop up that 96 records are getting saved.

Error while sending data to TP

Hi B2B Gurus,
While I am sending data to our trading partner, I am getting the below error. Its very high priority. Please help me to resolve this.
Machine Info: (essapt020-u009.emrsn.com)
Transport error: [IPT_HttpSendError] HTTP encounters send error :502
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>502 Bad Gateway</title>
</head><body>
<h1>Bad Gateway</h1>
<p>The proxy server received an invalid
response from an upstream server.
</p>
<p>Additionally, a 404 Not Found
error was encountered while trying to use an ErrorDocument to handle the request.</p>
</body></html>
[IPT_HttpSendError] HTTP encounters send error :502
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>502 Bad Gateway</title>
</head><body>
<h1>Bad Gateway</h1>
<p>The proxy server received an invalid
response from an upstream server.
</p>
<p>Additionally, a 404 Not Found
error was encountered while trying to use an ErrorDocument to handle the request.</p>
</body></html>
.

Hi Anuj,
I send you a log files to your mail id.
Actually I able to connect to the tp's url.Still i am getting this error.
Machine Info: (essapt020-u009.emrsn.com)
Transport error: [IPT_HttpSendError] HTTP encounters send error :502
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>502 Bad Gateway</title>
</head><body>
<h1>Bad Gateway</h1>
<p>The proxy server received an invalid
response from an upstream server.
</p>
<p>Additionally, a 404 Not Found
error was encountered while trying to use an ErrorDocument to handle the request.</p>
</body></html>
[IPT_HttpSendError] HTTP encounters send error :502
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>502 Bad Gateway</title>
</head><body>
<h1>Bad Gateway</h1>
<p>The proxy server received an invalid
response from an upstream server.
</p>
<p>Additionally, a 404 Not Found
error was encountered while trying to use an ErrorDocument to handle the request.</p>
</body></html>
.

Error While Sending Data for Currency Translation

Hello Experts,
I am trying to send data via template. Data is getting saved but I am getting following error displayed.
1.) When I try to enter data for a particular month then, error as FX-200.
2.) When I try to enter data accross months of more than year then , FX-045 and FX-310 error.
I had look on various SAP Notes available for the errors.
As per them, I ran Full optimization, I checked rates are maintained for previous year too, I checked for LC Currency Type Property is maintained as L.
But nothing Worked.
Currently only the 3 members are maintained in Rate Dimension, so exceeding the size limit cannot be an issue.
Kindly Suggest, what could be another possible reason for the errors.
Regards,
Apoorva Garg

Hello,
1.) I am getting issues for example for 2010.Mar, 2010.Dec, 2013.Dec, 2012.Dec
2.) Business Rules Maintained
3.) Business Rule called via Default Script Logic
// Default base level logic - applies to all base members in all dimensions
*INCLUDE system_constants.lgl
//Process_Each_Member = TIME
*RUN_STORED_PROCEDURE=SPRUNCONVERSION('%APP%','KPI_Working_Act_FX','','GLOBAL','%SCOPETABLE%','%LOGTABLE%')
*COMMIT
//*RUN_STORED_PROCEDURE=SPRUNCONVERSION('%APP%','KPI_Working_AOP_FX','','GLOBAL','%SCOPETABLE%','%LOGTABLE%')
//*COMMIT
Regards,
Apoorva

Error while sending data to supplier

Hi All,
We are facing the errors while sending transaction to our supplier.Actually we send 60 transactions to our supplier in which 15 are errored out in B2B with the below error.
Please help me in resolving this.
2010.06.09 at 16:40:04:876: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Calling Send to transmit the message
2010.06.09 at 16:40:04:879: Thread-10: B2B - (DEBUG) Protocol Name: HTTP
2010.06.09 at 16:40:04:883: Thread-10: B2B - (DEBUG) Version Name: 1.1
2010.06.09 at 16:40:04:887: Thread-10: B2B - (DEBUG) Endpoint: http://interchange-stg.apl.com:4090/as2/interface
2010.06.09 at 16:40:04:891: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send URL: HTTP://INTERCHANGE-STG.APL.COM:4090/AS2/INTERFACE
                                                                      http://interchange-stg.apl.com:4090/as2/interface
2010.06.09 at 16:40:04:903: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send TO Endpoint: 501 http://interchange-stg.apl.com:4090/as2/interface
2010.06.09 at 16:40:04:906: Thread-10: B2B - (DEBUG)
Protocol = HTTP
Version = 1.1
Transport Header
Content-Transfer-Encoding:binary
Message-ID:<131982@EMRSNS>
MIME-version:1.0
ACTION_NAME:Process_X12_5020_850
From:EMRSNS
Disposition-Notification-To:[email protected]
AS2-To:ZZACSLTEST
User-Agent:AS2 Server
Date:Wed, 09 Jun 2010 16:39:54 GMT
Disposition-Notification-Options:signed-receipt-protocol=required, pkcs7-signature; signed-receipt-micalg=required, sha1
DOCTYPE_NAME:850
FROM_PARTY:EMRSNS
DOCTYPE_REVISION:5020
TO_PARTY:ZZACSLTEST
AS2-From:EMRSNS
AS2-Version:1.1
Content-Type:application/pkcs7-mime; smime-type="enveloped-data"
Parameters
-- listing properties --
http.sender.timeout=0
2010.06.09 at 16:40:04:910: Thread-10: B2B - (DEBUG) scheme null userName null realm null
2010.06.09 at 16:41:05:162: Thread-10: B2B - (WARNING)
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-1000
StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendError] HTTP encounters send error :.
     at oracle.tip.transport.TransportException.create(TransportException.java:91)
     at oracle.tip.transport.basic.HTTPSender.createTransportResponse(HTTPSender.java:754)
     at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:598)
     at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
     at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:1034)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1758)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.net.SocketTimeoutException: Read timed out
     at java.net.SocketInputStream.socketRead0(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:129)
     at HTTPClient.BufferedInputStream.fillBuff(BufferedInputStream.java:192)
     at HTTPClient.BufferedInputStream.read(BufferedInputStream.java:112)
     at HTTPClient.StreamDemultiplexor.read(StreamDemultiplexor.java:281)
     at HTTPClient.RespInputStream.read(RespInputStream.java:157)
     at HTTPClient.RespInputStream.read(RespInputStream.java:116)
     at HTTPClient.Response.readResponseHeaders(Response.java:997)
     at HTTPClient.Response.getHeaders(Response.java:713)
     at HTTPClient.Response.getStatusCode(Response.java:262)
     at HTTPClient.RetryModule.responsePhase1Handler(RetryModule.java:83)
     at HTTPClient.HTTPResponse.handleResponse(HTTPResponse.java:739)
     at HTTPClient.HTTPResponse.getStatusCode(HTTPResponse.java:196)
     at oracle.tip.transport.basic.HTTPSender.createTransportResponse(HTTPSender.java:721)
     ... 9 more
2010.06.09 at 16:41:05:163: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Error in sending message
2010.06.09 at 16:41:05:166: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Request Message Transmission failed
2010.06.09 at 16:41:05:168: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.06.09 at 16:41:05:171: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.06.09 at 16:41:05:173: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.06.09 at 16:41:05:176: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendError] HTTP encounters send error :.
Read timed out
2010.06.09 at 16:41:05:186: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2010.06.09 at 16:41:05:191: Thread-10: B2B - (DEBUG) Engine:notifyApp Enter
2010.06.09 at 16:41:05:202: Thread-10: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = 889C8E2466211E6DE0440015178ED696
2010.06.09 at 16:41:05:205: Thread-10: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>131982</correlationId>
<b2bMessageId>131982</b2bMessageId>
<errorCode>AIP-50079</errorCode>
<errorText>Transport error: [IPT_HttpSendError] HTTP encounters send error :.
Read timed out</errorText>
<errorDescription>
<![CDATA[Machine Info: (usmtnz-sinfwi02)
Transport error: [IPT_HttpSendError] HTTP encounters send error :.
Read timed out ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
Regards
sekhar

Hi Sekhar,
2010.06.09 at 16:41:05:176: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendError] HTTP encounters send error :.
Read timed outIt seems that either your TP's server is not accepting these requests (due to heavy load)/ message size is too large that HTTP timout has occured. Possibility for later case is low because only 25% messages are erroring out. Anyways, you may like to tune your B2B system and test again -
http://www.b2bgurus.com/2007/10/oracle-as-b2b-performance-best.html
If no change happens, ask your TP to check his server settings.
Regards,
Anuj

Issue While sending data to Webserver

Similar Messages

Maybe you are looking for