Performance issue with selection of line items.
Hi All.
I am facing seriour Time_Out error problem for my program. Actually i am developing RFC and i have to send data to non sap system as it is in sap tables. Now i have to send data for BSIS for new entries for a day. SO first i search BELNR for CPUDT in BKPF and then use for all entries on BSIS. But now my problem is for a single day i am getting 1679 documents from BKPF and when i use for all entries in BSIS, it will give time out error.
my code is like
SELECT BUKRS BELNR GJAHR
FROM BKPF INTO CORRESPONDING FIELDS OF TABLE I_BKPF
WHERE CPUDT IN S_CPUDT.
if i_bkpf[] is not initial.
SELECT * FROM BSIS INTO TABLE I_BSIS
FOR ALL ENTRIES IN I_BKPF
WHERE BUKRS = I_BKPF-BUKRS
BELNR = I_BKPF-BELNR
GJAHR = I_BKPF-GJAHR.
endif.
So please gurus help me ..its urgent..
Instead of writing Select * write Select "Fields names" then try might be it will solve ur problem.
Reward points is helpfull
Similar Messages
-
Performance Issue with BSIS(open accounting items)
Hey All,
I am having serious performance issue with a accrual report which gets all open GL items, and need some tips for optimization.
The main issue is that I am accesing large tables like BSIS, BSEG, BSAS etc without proper indexes and that I am dealing with huge amounts of data.
The select itself take a long time and after that as I have so much data overall execution is slow too.
The select which concerns me the most is:
SELECT zuonr hkont gjahr belnr buzei budat blart wrbtr shkzg xblnr waers bukrs
INTO TABLE i_bsis
FROM bsis
WHERE bukrs = '1000'
AND hkont in r_hkont
AND budat <= p_lcdate
AND augdt = 0
AND augbl = space
AND gsber = c_ZRL1
AND gjahr BETWEEN l_gjahr2 AND l_gjahr
AND ( blart = c_re "Invoice
OR blart = c_we "Goods receipt
OR blart = c_zc "Invoice Cancels
OR blart = c_kp ). "Accounting offset
I have seen other related threads, but was not that helpful.
We already have a secondary index on bukrs hkont and budat, and i have checked in ST05 that it does use it. But inspite that it takes more than 15 hrs to complete(maybe because of huge data).
Any Input is highly appreciated.
ThanksThank you Thomas for your inputs:
You said that R_HKONT contains several ranges of account numbers. If these ranges cover a significant
portion of the overall existing account numbers, then there is no really quick access possible via the
BSIS primary key.
Unfortunately R_HKONT contains all account numbers.
As Rob said, your index on HKONT and BUDAT does not help much, since you are selecting "<=" on
BUDAT. No chance of narrowing down that range?
Will look into this.
What about GSBER? Does the value in c_ZRL1 provide a rather small subset of the overall values? Then
an index on BUKRS and GSBER might be helpful.
ZRL1 does provide a decent selection . But I dont know if one more index is a good idea on overall
system performance.
I assume that the four document types are not very selective, so it probably does not pay off to
investigate selecting on BKPF (there is an index involving BLART) and joining BSIS for the additional
information. You still might want to look into it though.
I did try to investigate this option too. Based on other threads related to BSIS and Robs Suggestion in
those threads I tried this:
SELECT bukrs belnr gjahr blart budat
FROM bkpf INTO TABLE bkpf_l
WHERE bukrs = c_pepsico
AND bstat IN (' ', 'A', 'B', 'D', 'M', 'S', 'V', 'W', 'Z')
AND blart IN ('RE', 'WE', 'ZC', 'KP')
AND gjahr BETWEEN l_gjahr2 AND l_gjahr
AND budat <= p_lcdate.
SELECT zuonr hkont gjahr belnr buzei budat blart wrbtr shkzg xblnr waers bukrs
FROM bsis INTO TABLE i_bsis FOR ALL ENTRIES IN bkpf_l
WHERE bukrs = bkpf_l-bukrs
AND hkont IN r_hkont
AND budat = bkpf_l-budat
AND augdt = 0
AND augbl = space
AND gjahr = bkpf_l-gjahr
AND belnr = bkpf_l-belnr
AND blart = bkpf_l-blart
AND gsber = c_zrl1.
The improves the select on BSIS a lot, but the first select on BKPF kills it. Not sure if this would help
improve performance.
Also I was wondering whether it helps on refreshing the tabe statistics through DB20. The last refresh
was done 7 months back. How frequently should we do this? Will it help? -
Performance Issue with Selection Screen Values
Hi,
I am facing a performance issue(seems like a performance issue ) in my project.
I have a query with some RKFs and sales area in filters (single value variable which is optional).
Query is by default restricted by current month.
The Cube on which the query operates has around 400,000 records for a month.
The Cube gets loaded every three hours
When I run the query with no filters I get the output within 10~15 secs.
The issue I am facing is that, when I enter a sales area in my selection screen the query gets stuck in the data selection step. In fact we are facing the same problem if we use one or two other characteristics in our selection screen
We have aggregates/indexes etc on our cube.
Has any one faced a similar situation?
Does any one have any comments on this ?
Your help will be appreciated. ThanksHi A R,
Goto RSRT--> Give ur query anme --> Execute =Debug
--> No a pop up ill come with many check boxes select "Display Aggregates found" option --> now give ur
selections in variable screen > first it will give the already existing aggregate names> continue> now after displaying all the aggregates it will display the list of objects realted to cube wise> try to copy these objects into notepad> again go with ur drill downs now u'll get the already existing aggregates for this drill down-> it will display the list of objects> copy them to notepad> now sort all the objects related to one cube by deleting duplicate objects in the note pad>goto that Infocube> context>maintain aggregates> create aggregate on the objects u copied into note pad.
now try to execyte the report... it should work properly with out delays for those selections.
I hope it helps you...
Regards,
Ramki. -
Issue with selecting a line on table control
Hello Experts,
We have a table control and using w/ SelColumn for selecting the highlighted line on a table control. It's working fine sometimes but not working in other cases. It's really wierd.
On this screen, under the Table Control, we have provided Bottons do some functionality.
When the users select a row and click on this push button, it has to call another pop-up screen.
We have the code like this:
PROCESS BEFORE OUTPUT.
MODULE INIT_0600.
LOOP AT T_qacomp_prt INTO qacomp_prt WITH CONTROL TC_qacomp_prt.
module fill_part_number.
MODULE Gray_Parts.
FIELD T_qacomp_prt-MARK.
module highlight_lines.
MODULE LINES_0600.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL_600 AT EXIT-COMMAND.
LOOP AT T_qacomp_prt.
FIELD T_qacomp_prt-MARK.
MODULE READ_TABLE_CONTROL_600.
ENDLOOP.
MODULE USER_COMMAND_0600.
In User-Command the code is like this:
MODULE USER_COMMAND_0600 INPUT.
when 'ADD'.
if t_qacomp_prt-mark = 'X'.
get cursor line lin.
call screen 0615 starting at 30 15.
else.
message i999(zxx) with 'Please select a line'.
endif.
For eg, When there are 5 lines on the table control, If I select the 2nd line and click on "ADD", it is calling the pop-up correctly.
However, If I select the 4th line and click on "ADD" button, it is giving the message "Please select the line".
PS: PBO, PAI code already exists, I only added the "USER-COMMAND" code.
Can you please let me know what went wrong? I greatly appreciate your help.
Thanks.Hi,
Provide a Check box for that table control. Declare that Check box field as Type c in Main program. Go to screen PAI module write code for deleting that lines by clicking one button using sy-ucomm. Delete it where is_chk = 'X'..like try -
Performance issue with select query
Hi friends ,
This is my select query which is taking so much time to retrive the records.CAn Any one help me in solving this performance issue.
*- Get the Goods receipts mainly selected per period (=> MKPF secondary
SELECT msegebeln msegebelp mseg~werks
ekkobukrs ekkolifnr ekkozterm ekkoekorg ekko~ekgrp
ekkoinco1 ekkoexnum
lfa1name1 lfa1land1 lfa1ktokk lfa1stceg
mkpfmblnr mkpfmjahr msegzeile mkpfbldat mkpf~budat
mseg~bwart
*Start of changes for CIP 6203752 by PGOX02
mseg~smbln
*End of changes for CIP 6203752 by PGOX02
ekpomatnr ekpotxz01 ekpomenge ekpomeins
ekbemenge ekbedmbtr ekbewrbtr ekbewaers
ekpolgort ekpomatkl ekpowebaz ekpokonnr ekpo~ktpnr
ekpoplifz ekpobstae
INTO TABLE it_temp
FROM mkpf JOIN mseg ON msegmblnr EQ mkpfmblnr
AND msegmjahr EQ mkpfmjahr
JOIN ekbe ON ekbeebeln EQ msegebeln
AND ekbeebelp EQ msegebelp
AND ekbe~zekkn EQ '00'
AND ekbe~vgabe EQ '1'
AND ekbegjahr EQ msegmjahr
AND ekbebelnr EQ msegmblnr
AND ekbebuzei EQ msegzeile
JOIN ekpo ON ekpoebeln EQ ekbeebeln
AND ekpoebelp EQ ekbeebelp
JOIN ekko ON ekkoebeln EQ ekpoebeln
JOIN lfa1 ON lfa1lifnr EQ ekkolifnr
WHERE mkpf~budat IN so_budat
AND mkpf~bldat IN so_bldat
AND mkpf~vgart EQ 'WE'
AND mseg~bwart IN so_bwart
AND mseg~matnr IN so_matnr
AND mseg~werks IN so_werks
AND mseg~lifnr IN so_lifnr
AND mseg~ebeln IN so_ebeln
AND ekko~ekgrp IN so_ekgrp
AND ekko~bukrs IN so_bukrs
AND ekpo~matkl IN so_matkl
AND ekko~bstyp IN so_bstyp
AND ekpo~loekz EQ space
AND ekpo~plifz IN so_plifz.
Thanks & Regards,
Manoj Kumar .Thatha
Moderator message - Please see Please Read before Posting in the Performance and Tuning Forum before posting and please use code tags when posting code - post locked
Edited by: Rob Burbank on Feb 4, 2010 9:03 AMHi friends ,
This is my select query which is taking so much time to retrive the records.CAn Any one help me in solving this performance issue.
*- Get the Goods receipts mainly selected per period (=> MKPF secondary
SELECT msegebeln msegebelp mseg~werks
ekkobukrs ekkolifnr ekkozterm ekkoekorg ekko~ekgrp
ekkoinco1 ekkoexnum
lfa1name1 lfa1land1 lfa1ktokk lfa1stceg
mkpfmblnr mkpfmjahr msegzeile mkpfbldat mkpf~budat
mseg~bwart
*Start of changes for CIP 6203752 by PGOX02
mseg~smbln
*End of changes for CIP 6203752 by PGOX02
ekpomatnr ekpotxz01 ekpomenge ekpomeins
ekbemenge ekbedmbtr ekbewrbtr ekbewaers
ekpolgort ekpomatkl ekpowebaz ekpokonnr ekpo~ktpnr
ekpoplifz ekpobstae
INTO TABLE it_temp
FROM mkpf JOIN mseg ON msegmblnr EQ mkpfmblnr
AND msegmjahr EQ mkpfmjahr
JOIN ekbe ON ekbeebeln EQ msegebeln
AND ekbeebelp EQ msegebelp
AND ekbe~zekkn EQ '00'
AND ekbe~vgabe EQ '1'
AND ekbegjahr EQ msegmjahr
AND ekbebelnr EQ msegmblnr
AND ekbebuzei EQ msegzeile
JOIN ekpo ON ekpoebeln EQ ekbeebeln
AND ekpoebelp EQ ekbeebelp
JOIN ekko ON ekkoebeln EQ ekpoebeln
JOIN lfa1 ON lfa1lifnr EQ ekkolifnr
WHERE mkpf~budat IN so_budat
AND mkpf~bldat IN so_bldat
AND mkpf~vgart EQ 'WE'
AND mseg~bwart IN so_bwart
AND mseg~matnr IN so_matnr
AND mseg~werks IN so_werks
AND mseg~lifnr IN so_lifnr
AND mseg~ebeln IN so_ebeln
AND ekko~ekgrp IN so_ekgrp
AND ekko~bukrs IN so_bukrs
AND ekpo~matkl IN so_matkl
AND ekko~bstyp IN so_bstyp
AND ekpo~loekz EQ space
AND ekpo~plifz IN so_plifz.
Thanks & Regards,
Manoj Kumar .Thatha
Moderator message - Please see Please Read before Posting in the Performance and Tuning Forum before posting and please use code tags when posting code - post locked
Edited by: Rob Burbank on Feb 4, 2010 9:03 AM -
Performance issue with select query and for all entries.
hi,
i have a report to be performance tuned.
the database table has around 20 million entries and 25 fields.
so, the report fetches the distinct values of two fields using one select query.
so, the first select query fetches around 150 entries from the table for 2 fields.
then it applies some logic and eliminates some entries and makes entries around 80-90...
and then it again applies the select query on the same table using for all entries applied on the internal table with 80-90 entries...
in short,
it accesses the same database table twice.
so, i tried to get the database table in internal table and apply the logic on internal table and delete the unwanted entries.. but it gave me memory dump, and it wont take that huge amount of data into abap memory...
is around 80-90 entries too much for using "for all entries"?
the logic that is applied to eliminate the entries from internal table is too long, and hence cannot be converted into where clause to convert it into single select..
i really cant find the way out...
please help.chinmay kulkarni wrote:Chinmay,
Even though you tried to ask the question with detailed explanation, unfortunately it is still not clear.
It is perfectly fine to access the same database twice. If that is working for you, I don't think there is any need to change the logic. As Rob mentioned, 80 or 8000 records is not a problem in "for all entries" clause.
>
> so, i tried to get the database table in internal table and apply the logic on internal table and delete the unwanted entries.. but it gave me memory dump, and it wont take that huge amount of data into abap memory...
>
It is not clear what you tried to do here. Did you try to bring all 20 million records into an internal table? That will certainly cause the program to short dump with memory shortage.
> the logic that is applied to eliminate the entries from internal table is too long, and hence cannot be converted into where clause to convert it into single select..
>
That is fine. Actually, it is better (performance wise) to do much of the work in ABAP than writing a complex WHERE clause that might bog down the database. -
Performance issues with respect scheme registration,select & insert query
I am facing performance issues with respect to schema registration,Select & insert query towards 10.2.0.3 version.It is taking around 45 minutes to register schema and it is taking around 5 min to insert a single document into xml db where as it was taking less than min to insert a single document into xml db of 9.2.0.6 version.Would like to know the issue and solution to resolve this issue.Please help me out on this as it is very urgent for me
Since it appears that this is an XML DB specific question, you're probably better off posting in the XML DB. The folks over there have much more experience with the ins and outs of that particular product.
Justin -
Performance issue with view selection after migration from oracle to MaxDb
Hello,
After the migration from oracle to MaxDb we have serious performance issues with a lot of our tableview selections.
Does anybody know about this problem and how to solve it ??
Best regards !!!
Gert-JanHello Gert-Jan,
most probably you need additional indexes to get better performance.
Using the command monitor you can identify the long running SQL statements and check the optimizer access strategy. Then you can decide which indexes might help.
If this is about an SAP system, you can find additional information about performance analysis in SAP notes 725489 and 819641.
SAP Hosting provides the so-called service 'MaxDB Migration Support' to help you in such cases. The service description can be found here:
http://www.saphosting.de/mediacenter/pdfs/solutionbriefs/MaxDB_de.pdf
http://www.saphosting.com/mediacenter/pdfs/solutionbriefs/maxDB-migration-support_en.pdf.
Best regards,
Melanie Handreck -
Performance issues with Imac intel 2011 27 inch..
I have an 2011 imac 3,4 GHz Intel Core i7 with 16 GB 1333 MHz DDR3 RAM.
Since a few months i noticed performance issues with FCPX, where before it would run through video it shows sometimes the color ball. Now the computer is slow in starting up and shutting down also. Ran disk utility but to no avail. I am now considering reinstalling mavericks.
But I ran etrecheck.
here are the results, please who can help me? I use this computer to edit and about everything else.
copied:
Problem description:
slow start and slow quit of computer. Performance issues with fcpx and other programms.
EtreCheck version: 2.1.8 (121)
Report generated 6 maart 2015 21:49:31 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:7:46
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.78 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Western Digital Ext HDD 1021 2 TB
EFI (disk2s1) <not mounted> : 210 MB
datavideo (disk2s2) /Volumes/datavideo : 1.37 TB (133.89 GB free)
prive (disk2s3) /Volumes/prive : 627.23 GB (68.13 GB free) - 7 errors
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk3s1) <not mounted> : 315 MB
downloads (disk3s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk3s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[loaded] com.avid.ApplicationManager.plist [Click for support]
[loaded] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.36 GB
downloads: Disk size: 249.18 GB Disk used: 110.84 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% Google Chrome
1% WindowServer
0% opendirectoryd
0% mds
0% dpd
Top Processes by Memory: ℹ️
206 MB mds_stores
172 MB com.apple.IconServicesAgent
155 MB Google Chrome
137 MB Dock
113 MB Google Chrome Helper
Virtual Memory Information: ℹ️
10.02 GB Free RAM
4.36 GB Active RAM
1.35 GB Inactive RAM
1.44 GB Wired RAM
1.24 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 6, 2015, 09:37:26 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hangProblem description:
disk problems
EtreCheck version: 2.1.8 (121)
Report generated 7 maart 2015 14:16:18 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:19:51
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.97 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
HGST HDS724040ALE640 disk2 : (4 TB)
EFI (disk2s1) <not mounted> : 210 MB
disk2s2 (disk2s2) <not mounted> : 4.00 TB
Boot OS X (disk2s3) <not mounted> : 134 MB - one error
HGST HDS724040ALE640 disk3 : (4 TB)
EFI (disk3s1) <not mounted> : 210 MB
disk3s2 (disk3s2) <not mounted> : 4.00 TB
Boot OS X (disk3s3) <not mounted> : 134 MB
USB Information: ℹ️
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk5s1) <not mounted> : 315 MB
downloads (disk5s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk5s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[running] com.avid.ApplicationManager.plist [Click for support]
[running] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.17 GB
downloads: Disk size: 249.18 GB Disk used: 110.83 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% fontd
0% firefox
0% AvidApplicationManager
0% AppleSpell
Top Processes by Memory: ℹ️
498 MB firefox
241 MB mds_stores
172 MB com.apple.IconServicesAgent
137 MB Dock
100 MB java
Virtual Memory Information: ℹ️
12.33 GB Free RAM
2.39 GB Active RAM
1.11 GB Inactive RAM
1.34 GB Wired RAM
934 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 7, 2015, 01:56:19 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang -
Issue while clearing open line items
Hi team,
While clearing open line items for vendors, customers, and GL's system is posting new line items. It should post without new line items. Example
Customer is having debit and credit line items with same amount i am going to clearing manually thru f-32 here sytem is posting new document with new line items. It should post without line items. I have selected Negetive postings permited check box in OBY6. I have not selected check box in document types. Do i need to change in document type also or i missed anything in settings pls help me to overcome this issue.
Regards,
Nagaraju.Dear:
The option to create a clearing document WITH or WITHOUT line items depend on the fields of the structure KONTAB_1ST if all the fields are equal in the documents the clearing document will be generated and posted without line items
Please check OSS note 95077. Check the settings in
IMG >Financial Accounting (New) >General Ledger Accounting (New) >
Business Transactions >Document Splitting >Activate Document Splitting
Check the following link for the same
F.13 clearing Document contains Lineitems
Regards -
Service Procurement with Multiple Service Line items
Dear Experts,
We have the following Business Scenario. Request your inputs in addressing this issue.
Business scenario : Most of the Procurement for our client is of services. So, we need to configure services with multiple service line items. This Shopping cart to create PR in ECC. PR to PO conversion to take place in ECC. Now onwards client needs Supplier integration for confirmation of services and sending invoices by Vendor.
Guidance required in the following
1 In Shop functionality if we select services, PR is being created in ECC with only one Service Line item. Whereas if we go for Request functionality, then always it is routing to Bidding process (which is not required for client). Can we create SC with multiple service line items with out request functionality?? Or Can we root the Request functionality with out Bidding process??
2 If we convert the PR to PO in ECC (Classic Scenario), can we go for SUS integration. In such case which is the best way of supplier integration. Can you please guide us on basic steps on installation (can we go for different client in the same server) and configuration.
Request your inputs in this regard
Thank you,
RaviHello,
We suffered the same problem in our company. We have found a way to work with the SRM shopping cart multiple line rollup to ECC single line purchase order.
If the multiple shopping cart line items contain the same location code and cost assignment they will rollup into one ECC purchase order. The system seems to 'think' it is helping you by consolidating your information.
In the Basic Data section of the shopping cart there is a Service line item field. If you enter something in each in that field for each line it will keep it's own line in ECC.
Your implementation may differ slightly from ours but I recommend playing with the location code, cost assignment and Basic Data service line fields until you can see a pattern. Basically you need to find a method to make each line a separate entity so they don't rollup.
Good luck,
Corinne -
Performance issues with pipelined table functions
I am testing pipelined table functions to be able to re-use the <font face="courier">base_query</font> function. Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? The <font face="courier">processor</font> function is from [url http://www.oracle-developer.net/display.php?id=429]improving performance with pipelined table functions .
Edit: The underlying query returns 500,000 rows in about 3 minutes. So there are are no performance issues with the query itself.
Many thanks in advance.
CREATE OR REPLACE PACKAGE pipeline_example
IS
TYPE resultset_typ IS REF CURSOR;
TYPE row_typ IS RECORD (colC VARCHAR2(200), colD VARCHAR2(200), colE VARCHAR2(200));
TYPE table_typ IS TABLE OF row_typ;
FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
RETURN resultset_typ;
c_default_limit CONSTANT PLS_INTEGER := 100;
FUNCTION processor (
p_source_data IN resultset_typ,
p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
RETURN table_typ
PIPELINED
PARALLEL_ENABLE(PARTITION p_source_data BY ANY);
PROCEDURE with_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ);
PROCEDURE no_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ);
END pipeline_example;
CREATE OR REPLACE PACKAGE BODY pipeline_example
IS
FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
RETURN resultset_typ
IS
o_resultset resultset_typ;
BEGIN
OPEN o_resultset FOR
SELECT colC, colD, colE
FROM some_table
WHERE colA = ArgA AND colB = argB;
RETURN o_resultset;
END base_query;
FUNCTION processor (
p_source_data IN resultset_typ,
p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
RETURN table_typ
PIPELINED
PARALLEL_ENABLE(PARTITION p_source_data BY ANY)
IS
aa_source_data table_typ;-- := table_typ ();
BEGIN
LOOP
FETCH p_source_data
BULK COLLECT INTO aa_source_data
LIMIT p_limit_size;
EXIT WHEN aa_source_data.COUNT = 0;
/* Process the batch of (p_limit_size) records... */
FOR i IN 1 .. aa_source_data.COUNT
LOOP
PIPE ROW (aa_source_data (i));
END LOOP;
END LOOP;
CLOSE p_source_data;
RETURN;
END processor;
PROCEDURE with_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ)
IS
BEGIN
OPEN o_resultset FOR
SELECT /*+ PARALLEL(t, 5) */ colC,
SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
SUM (CASE WHEN colD = colE AND colD != '0' THEN '1' END) de_one,
SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
FROM TABLE (processor (base_query (argA, argB),100)) t
GROUP BY colC
ORDER BY colC
END with_pipeline;
PROCEDURE no_pipeline (argA IN VARCHAR2,
argB IN VARCHAR2,
o_resultset OUT resultset_typ)
IS
BEGIN
OPEN o_resultset FOR
SELECT colC,
SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
SUM (CASE WHEN colD = colE AND colD != '0' THEN 1 END) de_one,
SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
FROM (SELECT colC, colD, colE
FROM some_table
WHERE colA = ArgA AND colB = argB)
GROUP BY colC
ORDER BY colC;
END no_pipeline;
END pipeline_example;
ALTER PACKAGE pipeline_example COMPILE;Edited by: Earthlink on Nov 14, 2010 9:47 AM
Edited by: Earthlink on Nov 14, 2010 11:31 AM
Edited by: Earthlink on Nov 14, 2010 11:32 AM
Edited by: Earthlink on Nov 20, 2010 12:04 PM
Edited by: Earthlink on Nov 20, 2010 12:54 PMEarthlink wrote:
Contrary to my understanding, the <font face="courier">with_pipeline</font> procedure runs 6 time slower than the legacy <font face="courier">no_pipeline</font> procedure. Am I missing something? Well, we're missing a lot here.
Like:
- a database version
- how did you test
- what data do you have, how is it distributed, indexed
and so on.
If you want to find out what's going on then use a TRACE with wait events.
All nessecary steps are explained in these threads:
HOW TO: Post a SQL statement tuning request - template posting
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Another nice one is RUNSTATS:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701 -
Performance issues with version enable partitioned tables?
Hi all,
Are there any known performance issues with version enable partitioned tables?
Ive been doing some performance testes with a large version enable partitioned table and it seems that OCB optimiser is choosing very expensive plans during merge operations.
Tanks in advance,
Vitor
Example:
Object Name Rows Bytes Cost Object Node In/Out PStart PStop
UPDATE STATEMENT Optimizer Mode=CHOOSE 1 249
UPDATE SIG.SIG_QUA_IMG_LT
NESTED LOOPS SEMI 1 266 249
PARTITION RANGE ALL 1 9
TABLE ACCESS FULL SIG.SIG_QUA_IMG_LT 1 259 2 1 9
VIEW SYS.VW_NSO_1 1 7 247
NESTED LOOPS 1 739 247
NESTED LOOPS 1 677 247
NESTED LOOPS 1 412 246
NESTED LOOPS 1 114 244
INDEX RANGE SCAN WMSYS.MODIFIED_TABLES_PK 1 62 2
INDEX RANGE SCAN SIG.QIM_PK 1 52 243
TABLE ACCESS BY GLOBAL INDEX ROWID SIG.SIG_QUA_IMG_LT 1 298 2 ROWID ROW L
INDEX RANGE SCAN SIG.SIG_QUA_IMG_PKI$ 1 1
INDEX RANGE SCAN WMSYS.WM$NEXTVER_TABLE_NV_INDX 1 265 1
INDEX UNIQUE SCAN WMSYS.MODIFIED_TABLES_PK 1 62
/* Formatted on 2004/04/19 18:57 (Formatter Plus v4.8.0) */
UPDATE /*+ USE_NL(Z1) ROWID(Z1) */sig.sig_qua_img_lt z1
SET z1.nextver =
SYS.ltutil.subsversion
(z1.nextver,
SYS.ltutil.getcontainedverinrange (z1.nextver,
'SIG.SIG_QUA_IMG',
'NpCyPCX3dkOAHSuBMjGioQ==',
4574,
4575
4574
WHERE z1.ROWID IN (
(SELECT /*+ ORDERED USE_NL(T1) USE_NL(T2) USE_NL(J2) USE_NL(J3)
INDEX(T1 QIM_PK) INDEX(T2 SIG_QUA_IMG_PKI$)
INDEX(J2 WM$NEXTVER_TABLE_NV_INDX) INDEX(J3 MODIFIED_TABLES_PK) */
t2.ROWID
FROM (SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j1,
sig.sig_qua_img_lt t1,
sig.sig_qua_img_lt t2,
wmsys.wm$nextver_table j2,
(SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j3
WHERE t1.VERSION = j1.VERSION
AND t1.ima_id = t2.ima_id
AND t1.qim_inf_esq_x_tile = t2.qim_inf_esq_x_tile
AND t1.qim_inf_esq_y_tile = t2.qim_inf_esq_y_tile
AND t2.nextver != '-1'
AND t2.nextver = j2.next_vers
AND j2.VERSION = j3.VERSION))Hello Vitor,
There are currently no known issues with version enabled tables that are partitioned. The merge operation may need to access all of the partitions of a table depending on the data that needs to be moved/copied from the child to the parent. This is the reason for the 'Partition Range All' step in the plan that you provided. The majority of the remaining steps are due to the hints that have been added, since this plan has provided the best performance for us in the past for this particular statement. If this is not the case for you, and you feel that another plan would yield better performance, then please let me know and I will take a look at it.
One suggestion would be to make sure that the table was been recently analyzed so that the optimizer has the most current data about the table.
Performance issues are very hard to fix without a reproducible test case, so it may be advisable to file a TAR if you continue to have significant performance issues with the mergeWorkspace operation.
Thank You,
Ben -
Performance issue with HRALXSYNC report..
HI,
I'm facing performance issue with the HRALXSYNC report. As this is Standard report, Can any body suggest me how to optimize the standard report..
Thanks in advance.
Saleem Javed
Moderator message: Please Read before Posting in the Performance and Tuning Forum, also look for existing SAP notes and/or send a support message to SAP.
Edited by: Thomas Zloch on Aug 23, 2011 4:17 PMSreedhar,
Thanks for you quick response. Indexes were not created for VBPA table. basis people tested by creating indexes and gave a report that it is taking more time with indexes than regular query optimizer. this is happening in the funtion forward_ag_selection.
select vbeln lifnr from vbpa
appending corresponding fields of table lt_select
where vbeln in ct_vbeln
and posnr eq posnr_initial
and parvw eq 'SP'
and lifnr in it_spdnr.
I don't see any issue with this query. I give more info later -
Performance Issue with VL06O report
Hi,
We are having performance issue with VL06O report, when run with forwarding agent. It is taking about an hour with forwarding agent. The issue is with VBPA table and we found one OSS note, but it is for old versions. ours is ECC 5.0. Can anybody know the solution? If you guys need more information, please ask me.
Thanks,
SuryaSreedhar,
Thanks for you quick response. Indexes were not created for VBPA table. basis people tested by creating indexes and gave a report that it is taking more time with indexes than regular query optimizer. this is happening in the funtion forward_ag_selection.
select vbeln lifnr from vbpa
appending corresponding fields of table lt_select
where vbeln in ct_vbeln
and posnr eq posnr_initial
and parvw eq 'SP'
and lifnr in it_spdnr.
I don't see any issue with this query. I give more info later
Maybe you are looking for
-
Connecting to a video projector
I bought a projector and cable, but instructions are unclear. They say "You must find the 'FN' key on your keyboard, and you must also find another key that looks like a square computer screen." I can fn the FN key, but not the other. Is there some k
-
I want to save some flexField value of a BPM human task into a custom field created in UCM doc store, for that i am following the following steps 1) Created a custom field in UCM document store 2) Created a flex field in BPM work Space 3) Added pay l
-
J just want to say that Video Call in Windows Live Mesenger (MSN) is far more stable than in Skype, always problemes with the connection.
-
I need to have a where clause but either/both of the two attributes compared could be null. How can I make this work, atm it just returns no records even though rows do exist. Thanks
-
Help on applying Workflow Relevant SAP Notes in Production
Hello, Can you please provide your input whether we should apply below mentioned SAP Notes in Production system. 1.SAP Note-0001925195 Symptom- In the context of event generation for system and user status, the system no longer generates the event) 2