Service Procurement with Multiple Service Line items

Dear Experts,
We have the following Business Scenario. Request your inputs in addressing this issue.
Business scenario : Most of the Procurement for our client is of services. So, we need to configure services with multiple service line items. This Shopping cart to create PR in ECC. PR to PO conversion to take place in ECC. Now onwards client needs Supplier integration for confirmation of services and sending invoices by Vendor.
Guidance required in the following
1 In Shop functionality if we select services, PR is being created in ECC with only one Service Line item. Whereas if we go for Request functionality, then always it is routing to Bidding process (which is not required for client). Can we create SC with multiple service line items with out request functionality?? Or Can we root the Request functionality with out Bidding process??
2 If we convert the PR to PO in ECC (Classic Scenario), can we go for SUS integration. In such case which is the best way of supplier integration. Can you please guide us on basic steps on installation (can we go for different client in the same server) and configuration.
Request your inputs in this regard
Thank you,
Ravi

Hello,
We suffered the same problem in our company. We have found a way to work with the SRM shopping cart multiple line rollup to ECC single line purchase order.
If the multiple shopping cart line items contain the same location code and cost assignment they will rollup into one ECC purchase order. The system seems to 'think' it is helping you by consolidating your information.
In the Basic Data section of the shopping cart there is a Service line item field. If you enter something in each in that field for each line it will keep it's own line in ECC.
Your implementation may differ slightly from ours but I recommend playing with the location code, cost assignment and Basic Data service line fields until you can see a pattern. Basically you need to find a method to make each line a separate entity so they don't rollup.
Good luck,
Corinne

Similar Messages

Service PO with Multiple service Line Items

Hi,
i am working on Service Po Creation by using BAPI BAPI_PO_CREAT1. I am able to create service for multiple line items but the problem is single line item my have multiple service line items in that case my object is not working. Can any one suggest solution for this.Here i am attachng what i written logic
           T_POITEM-PCKG_NO      = V_PACKNO.
        T_POSERVICE-PCKG_NO = V_PACKNO.                    "'0000000001'.
          T_POSERVICE-LINE_NO = V_LINENO.                    "'0000000001'.
          T_POSERVICE-OUTL_IND = 'X'.
          T_POSERVICE-EXT_LINE = '0'.           "V_EXTLIN.                  "'0'.
          T_POSERVICE-OUTL_LEVEL = '0'.           "V_EXTOUT.                "'0'.
          T_POSERVICE-SUBPCKG_NO = V_PACKNO + 1.               "'0000000003'. "(Dummy No.)
          T_POSERVICE-QUANTITY = ITAB-SERV_QUANTITY.
          T_POSERVICE-BASE_UOM = ITAB-BASE_UOM.
          T_POSERVICE-PRICE_UNIT = '1'.
          T_POSERVICE-GR_PRICE = ITAB-GR_PRICE.
          T_POSERVICE-SHORT_TEXT = ITAB-SERV_TEXT.             "'SERVICE TEST'.
          APPEND T_POSERVICE.
          V_LINENO = V_LINENO + 1.
*          V_PACKNO = V_SUBPACKNO.
          T_POSERVICE-PCKG_NO = V_PACKNO + 1.
          T_POSERVICE-LINE_NO = V_LINENO.
          T_POSERVICE-EXT_LINE = V_EXTLIN + 10.             "'0'.
          T_POSERVICE-OUTL_LEVEL = '0'.                          "V_EXTOUT.                "'0'.
          T_POSERVICE-OUTL_IND = SPACE.
          T_POSERVICE-QUANTITY = ITAB-SERV_QUANTITY.
          T_POSERVICE-SUBPCKG_NO = '0000000000'.
          T_POSERVICE-BASE_UOM = ITAB-BASE_UOM.
          T_POSERVICE-PRICE_UNIT = '1'.
          T_POSERVICE-GR_PRICE = ITAB-GR_PRICE.
          T_POSERVICE-SHORT_TEXT = ITAB-SERV_TEXT.                            "'SERVICE 1'.
          T_POSERVICE-PLN_PCKG   = V_PACKNO + 1.
          T_POSERVICE-PLN_LINE   = V_LINENO.
*          T_POSERVICE-MATL_GROUP = '0082'.
          APPEND T_POSERVICE.
*          SET PCKG_NO AS SUB_PCKG_NO IN TABLE POSRVACCESSVALUES THIS:
          T_POSERVALUE-PCKG_NO = V_PACKNO + 1.                                       "'0000000003'.
          T_POSERVALUE-LINE_NO = V_LINENO.
          T_POSERVALUE-SERNO_LINE = '01'.                "'01'.
          T_POSERVALUE-SERIAL_NO = '01'.              "   '01'.
          T_POSERVALUE-QUANTITY = ITAB-SERV_QUANTITY.       "'10.000'.
          APPEND T_POSERVALUE.

by following instructions in 420332 note.

Looking to create delivery with multiple batch line items

Hi,
Can you please suggest me BAPI / FM to create a delivery with multiple batches. like ... i have 1 mail line item in the delivery and n sub line items. If possible can you please post req parameters too. Thanks in advance.

solved my own

One service order and multiple services ??????????

Hello All
I am working on CRM 5.0 service module
Can I create a service order with more than one service I mean one document but contains multiple services and assign each service to a person responsible? And how?
Thanks in advance
Regards
Jacopo Françoise

You can create one service order with multiple service products,
the document will have both header and item level in both u need to assign the partner processing (emp responsible including) if there r different line items with different emp responsible u can satisfy ur issue.
abt theheader and item level some information:
understand what is transaction type? and the structure of the Transaction type.
The Transaction type determines the characteristics and attributes( what is the document category ,which Organizational data profile is allowed, which status profile is allowed, which action profile is allowed, which date profile is allowed, which Subject profile is allowed,which text determination profile is allowed, which partner determination profile is allowed and the number ranges for that particular transaction) of a particular transaction.
For example it says whethere the corresponding transaction is used for Lead, Opportunity or Sales order.
When it comes to Structure of a Transaction
it contains Header level data, Item level data and Schedule line data.
So Header level data is controlled by Transaction type.
Next comes Item level data The Item level data is controlled by Item category.
The Item category determines the characteristics and attributes of a line Item.
for example( it says whether the item is relevant for pricing or not, whether the item is relevant for billing or not, whether the item is relevant for shipping or not etc.)
The Item category will be determined automatically by the system at the run time depending upon the following key factors
Sales doc typeItem categoryHigher level Item+Item Usage
Hope this will help you in understanding Header level data and Item level data of a transaction.
Reward me points if helpful.
Regards
Manohar

Post Invoice for Service Entry with many Service line item-MM-LIV

Dear All,
I have a problem to post Invoice for Service Entry with many Service line item. The problem is as follow:
I have created 1 Service Entry which has 5 Service line item in it. Three of the service line item are subject to Value Added Tax (VAT), the others aren't. Then, i wanted to post Invoice for the Service Entry, however, it just display 1 item which amount in total. How can i segregate each service line item in Service Entry thus i can post Invoice for all Service line item with subject to VAT and all service item with not subject to VAT, if just 1 Service Entry created for it ?
Please help me.
Thank You

Hi Ganda,
If you mark the 'service based invoice verification' checkbox in your PO item, your service items will be in your invoice as seperate invoice lines. Then you can modify the taxcodes on service item level.
Kind regards, Dick Hendriks.

Service contract with multiple validity period

Hi,
I am having a requirement where i need to create service contracts with multiple validities.
some contracts may have 1 year validity, some six months.
I already have a transaction type for contract which is having 1 year validity period assigned in its date profile.
can i use the same transaction to create contracts for 6 months???
Regards,
PePe

Hi,
Yes you can use the same transaction type for the other validity period. What you can do is when you create a service contract, it will automatically pick up the 1 year duration since you have defined that way. But you can write some enhancement in ORDER_SAVE Badi.
First you create a Z table and maintain the different durations (say based on your item) in a Z table.
For example,
item    duration(months)
100       6
200       12
300       18
400       24
So at the time of saving the contract, your Badi implementation will be triggered and there you can pick up relevant duration (say 6 months) based on the item entered in your contract. And once you get the duration, you can change the Contract End date accordingly and then it will be saved. This way you can get the Contract duration as per your requirement.
Hope it HELPS...
Regards,
Shailesh Jadhav

Screen came up with multiple colored lines

When I plugged my phone into the wall to charge it came up with multiple colored lines. It has never done this. I immediately unplugged it and plugged it into my computer. When it started to sync it made a noise like when you scrunch up a piece of paper. The screen looked fine at this point. I checked a few minutes later and a message came up saying that no calls could be sent or received. Contact an apple dealer. I have not downloaded any thing that would be a no, no. Oh and now it won't charge. But it gets really hot to the touch when plugged into charge. It just gives a low battery warning. What did I do wrong???????

Sounds like your logic board went bad. Contact Apple and get it serviced.
1-800-MY-IPHONE
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

RFFOAVIS_FPAYM: Is this print program will support multiple PO line items

Hi, I am using the print program:RFFOAVIS_FPAYM and customized layout of: F110_IN_AVIS. I am able to get multiple Document numbers but I am not getting the multiple PO line items for each Document no. I had called the perform statement in text element : 625 in Main window.
Can you suggest how to modify the standard print program to our requirement. Where we need to
[code][code][code]declare the text element
[/code][/code][/code], Where we will declare the internal table for getting the PO line items.
Thanks & Regards
Madhu

Amar,
You can create a PO with multiple line item, but you can not create the PO with multiple currency.
Regards,
Manish

Help using /AFS/BAPI_PO_CREATE with multiple schedule lines

I'm using /AFS/BAPI_PO_CREATE to create POs and everything works fine until I pass an item with multiple schedule lines.
When you pass multiple schedules it is giving each of the schedule lines under an item the same grid value! So if I want to order one black, one white shirt... both grid values are changed to black when the PO is created.
I'm wondering if you need to pass some sort of sequence value into the BAPI when you have multiple schedule lines for an item. Does anyone know?

Hi Justin
Please make sure that you are specifying the item number while passing the ITEM Details and their correponding SCHEDULE lines.
Though i couldnt find FM: /AFS/BAPI_PO_CREATE in our system, i guess it is similar to BAPI_PO_CREATE.
Kind Regards
Eswar

Smartform with multiple Headers & Respective Item Details and Totals?

Dear All,
Appreciate if anyone clarify my doubt.
My requirement is to develop a smartform for billing with multiple headers & respective items and totals. For more clarity I'm explaining below.
 Header Section1
variable1 variable2 variable3 variable4 variable5
 variable6 variable7 variable8
variable9 variable10 variable11
Item Details1
s no vebeln verpr col4 col5 col6
total 123.21
total in words -
 value 321.21
 value 982.98
 value some value
footer details
 Header Section2
variable1 variable2 variable3 variable4 variable5
 variable6 variable7 variable8
variable9 variable10 variable11
Item Details2
s no vebeln verpr col4 col5 col6
total 123.21
total in words -
 value 321.21
 value 982.98
 value some value
footer details
 Header Section3
variable1 variable2 variable3 variable4 variable5
 variable6 variable7 variable8
variable9 variable10 variable11
Item Details3
s no vebeln verpr col4 col5 col6
total 123.21
total in words -
 value 321.21
 value 982.98
 value some value
footer details
Is this possible using smartforms?
Now they are using a classical report and takes printout in preprinted stationery.
requirement is to develop a smartform for this. there is a selection screen for the print program which accepts billing docs.
Thanks,

Rajiv,
Actually for your case you don't need a table inside the Main Window.
1.) First Populate all the data(header + item) in an internal table in the print program itself.
2.) Pass this internal table to the smartform.
3.) In the smartform give exact dimensions to the main window.
4.) In the Main Window Use a Loop on this internal table.
5.) Create a template for the header data giving the exact dimensions.
6.) Create another template for the item data giving exact dimensions to the template.
7.) If there is pre-printed text between these templates, insert a text element between these templates. This text element will have nothing just give a paragraph format to it. Go to smartstyle, create a style in which create a paragraph format setting line spacing parameter of this paragraph format of the same size as that of pre-printed text.
8.) Only 1 page is required since Loop statement will print the second record on the second page if the dimension of templates are exact.
9.) Dimensions you can easily measure from the pre-printed form.
<removed by moderator>
Edited by: Thomas Zloch on Mar 6, 2012

Gr Ir Assignment Updation with PO and Line Item

In the GL for GR IR Account the sort key was not maintained with PO number due to which the assigment field in the line item was getting updated with the posting date and not with the PO & LIne Item details.
We have made the requiste changes and new items are getting updated properly.
But require assitance in updating the earlier line items.
As of date total line items are more than 0.15 mn.
Please suggest some method to automatically update the assigment field of the GR IR Line items with the PO Details.
Regards
Mukesh

Hi,
You can use a substitution to update the field through FI. Use GGB4 for wirting a substitution you may need some ABAP coding to substitute PO no and line items in the assignment field. rule would be Co code =XXX and GL account =xxx and Posting date earlier than =xxxx then concatenrate EBELN and EBELP in Assigment field Zounr.
Then execute FBL3N and edit the assignment field by selecting all the documents and then save it you should see the PO line items populated. You can leave the substitution on or you can remove it after updating,
Regards
K.R

No result while creating a service consumer with Web Service Wizzard

Hi,
I've tried to create a service consumer with Web Service Wizzard in SE80 by using URL/HTTP Destination but nothing happens. After the popup with logondata for the WSDL I get the CRM start screen and nothing has been created in the given package.
technical details:
I use a CRM 5.0 system with SP15 (SAPKB70015).
I created the provider service at a 7.10 system with SP5 (SAPKB71005) via SPROXY, SOAMANAGER and WSPUBLISH and get the WSDL-URL from Service Registry.
The Service Registry of the 7.10 system serves as central Service Registry.
Has anybody an idea ?
Christoph

Guy,
Thanks for your reply.
This problem has been solved. Since I haven't turned on everything that to use transaction SOAMANAGER needs. After complete the switch-on works, the problem never happens again.
Thanks again.

Link contract with another PO line item condition

Hi
Need some solution for the following issue:
Explanation of the issue: First the contract is created for the freight and insurance for vendor say V1. Then the PO is created for the material for vendor V2. In the PO line item the freight and insurance is specified in different condition types. When specifying the cost for the freight and insurance they want to link it with the contract that was created with vendor V1. Is it possible to link the contract for freight and insurance with the PO line item cost?
Regards

Need solution

SAPF150D-Dunning Notice Print - With Update of Line Items and Master Record

When I am running this program SAPF150D(Dunning Notice Print - With Update of Line Items and Master Records) with a variant containing run date, runc id, update mode, pimmed & pcount; the job is failing to execute. It is giving message like,
"The field symbol is no longer assigned because there was an attempt makde previously in a Unicode program to set the field symbol using ASSIGN with offset and/or length specification. Here, the memory addressed by the offset/length specification was not within the allowed area."
"GETWA_NOT_ASSIGNED_RANGE" "SAPF150D" or "F150DFS0" "SORTFELDER_ERMITTELN"

Hi,
Search for routine FORM SORTFELDER_ERMITTELN
in SAPF150D.
Put a breakpoint in statement
ASSIGN (T047F-FELDN) TO <H1>.
in above routine and debug to the point where error is occuring.
Most likely there is a mismatch in the length assigned to some field FELDN in table T047F.
In that case, simply change the T047F-LENGT field accordingly in change mode.
Cheers,
Vikram
Edited by: Vikram Jalali on May 27, 2008 5:56 PM

Need to prevent invoices with 0 price line items to accounting .

Hi All,
I have a requirement where in I need to prevent the invoices with 0 price line items to accounting if item category is relevant for pricing.The invoices which have 0 price line items and item category has specific 0 price need not to be prevented for accounting.
Please provide your input to meet the requirement.
Thanks In Advance.

Hi,
Please go through the below link !!! follow this and it will resolve ur issue
Re: How to prevent invoices with 0 prices to be sent to accounting,
Regards,
Krishna O

Service Procurement with Multiple Service Line items

Similar Messages

Maybe you are looking for